summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2023-10-10netfilter: handle the connecting collision properly in nf_conntrack_proto_sctpXin Long
[ Upstream commit 8e56b063c86569e51eed1c5681ce6361fa97fc7a ] In Scenario A and B below, as the delayed INIT_ACK always changes the peer vtag, SCTP ct with the incorrect vtag may cause packet loss. Scenario A: INIT_ACK is delayed until the peer receives its own INIT_ACK 192.168.1.2 > 192.168.1.1: [INIT] [init tag: 1328086772] 192.168.1.1 > 192.168.1.2: [INIT] [init tag: 1414468151] 192.168.1.2 > 192.168.1.1: [INIT ACK] [init tag: 1328086772] 192.168.1.1 > 192.168.1.2: [INIT ACK] [init tag: 1650211246] * 192.168.1.2 > 192.168.1.1: [COOKIE ECHO] 192.168.1.1 > 192.168.1.2: [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: [COOKIE ACK] Scenario B: INIT_ACK is delayed until the peer completes its own handshake 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] 192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] * This patch fixes it as below: In SCTP_CID_INIT processing: - clear ct->proto.sctp.init[!dir] if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir]. (Scenario E) - set ct->proto.sctp.init[dir]. In SCTP_CID_INIT_ACK processing: - drop it if !ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] && ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario B, Scenario C) - drop it if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario A) In SCTP_CID_COOKIE_ACK processing: - clear ct->proto.sctp.init[dir] and ct->proto.sctp.init[!dir]. (Scenario D) Also, it's important to allow the ct state to move forward with cookie_echo and cookie_ack from the opposite dir for the collision scenarios. There are also other Scenarios where it should allow the packet through, addressed by the processing above: Scenario C: new CT is created by INIT_ACK. Scenario D: start INIT on the existing ESTABLISHED ct. Scenario E: start INIT after the old collision on the existing ESTABLISHED ct. 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] (both side are stopped, then start new connection again in hours) 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 242308742] Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10bpf: Fix tr dereferencingLeon Hwang
[ Upstream commit b724a6418f1f853bcb39c8923bf14a50c7bdbd07 ] Fix 'tr' dereferencing bug when CONFIG_BPF_JIT is turned off. When CONFIG_BPF_JIT is turned off, 'bpf_trampoline_get()' returns NULL, which is same as the cases when CONFIG_BPF_JIT is turned on. Closes: https://lore.kernel.org/r/202309131936.5Nc8eUD0-lkp@intel.com/ Fixes: f7b12b6fea00 ("bpf: verifier: refactor check_attach_btf_id()") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Leon Hwang <hffilwlqm@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230917153846.88732-1-hffilwlqm@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10ata: libata-sata: increase PMP SRST timeout to 10sMatthias Schiffer
commit 753a4d531bc518633ea88ac0ed02b25a16823d51 upstream. On certain SATA controllers, softreset fails after wakeup from S2RAM with the message "softreset failed (1st FIS failed)", sometimes resulting in drives not being detected again. With the increased timeout, this issue is avoided. Instead, "softreset failed (device not ready)" is now logged 1-2 times; this later failure seems to cause fewer problems however, and the drives are detected reliably once they've spun up and the probe is retried. The issue was observed with the primary SATA controller of the QNAP TS-453B, which is an "Intel Corporation Celeron/Pentium Silver Processor SATA Controller [8086:31e3] (rev 06)" integrated in the Celeron J4125 CPU, and the following drives: - Seagate IronWolf ST12000VN0008 - Seagate IronWolf ST8000NE0004 The SATA controller seems to be more relevant to this issue than the drives, as the same drives are always detected reliably on the secondary SATA controller on the same board (an ASMedia 106x) without any "softreset failed" errors even without the increased timeout. Fixes: e7d3ef13d52a ("libata: change drive ready wait after hard reset to 5s") Cc: stable@vger.kernel.org Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-10bpf: Fix BTF_ID symbol generation collisionJiri Olsa
commit 8f908db77782630c45ba29dac35c434b5ce0b730 upstream. Marcus and Satya reported an issue where BTF_ID macro generates same symbol in separate objects and that breaks final vmlinux link. ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol '__BTF_ID__struct__cgroup__624' is already defined This can be triggered under specific configs when __COUNTER__ happens to be the same for the same symbol in two different translation units, which is already quite unlikely to happen. Add __LINE__ number suffix to make BTF_ID symbol more unique, which is not a complete fix, but it would help for now and meanwhile we can work on better solution as suggested by Andrii. Cc: stable@vger.kernel.org Reported-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com> Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com> Closes: https://github.com/ClangBuiltLinux/linux/issues/1913 Debugged-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/bpf/CAEf4Bzb5KQ2_LmhN769ifMeSJaWfebccUasQOfQKaOd0nQ51tw@mail.gmail.com/ Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20230915-bpf_collision-v3-1-263fc519c21f@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-10ACPI: Check StorageD3Enable _DSD property in ACPI codeMario Limonciello
[ Upstream commit 2744d7a0733503931b71c00d156119ced002f22c ] Although first implemented for NVME, this check may be usable by other drivers as well. Microsoft's specification explicitly mentions that is may be usable by SATA and AHCI devices. Google also indicates that they have used this with SDHCI in a downstream kernel tree that a user can plug a storage device into. Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro Suggested-by: Keith Busch <kbusch@kernel.org> CC: Shyam-sundar S-k <Shyam-sundar.S-k@amd.com> CC: Alexander Deucher <Alexander.Deucher@amd.com> CC: Rafael J. Wysocki <rjw@rjwysocki.net> CC: Prike Liang <prike.liang@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Stable-dep-of: dad651b2a44e ("nvme-pci: do not set the NUMA node of device if it has none") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10cgroup: Fix suspicious rcu_dereference_check() usage warningChengming Zhou
commit f2aa197e4794bf4c2c0c9570684f86e6fa103e8b upstream. task_css_set_check() will use rcu_dereference_check() to check for rcu_read_lock_held() on the read-side, which is not true after commit dc6e0818bc9a ("sched/cpuacct: Optimize away RCU read lock"). This commit drop explicit rcu_read_lock(), change to RCU-sched read-side critical section. So fix the RCU warning by adding check for rcu_read_lock_sched_held(). Fixes: dc6e0818bc9a ("sched/cpuacct: Optimize away RCU read lock") Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Reported-by: syzbot+16e3f2c77e7c5a0113f9@syzkaller.appspotmail.com Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Tejun Heo <tj@kernel.org> Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20220305034103.57123-1-zhouchengming@bytedance.com Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10sched/cpuacct: Optimize away RCU read lockChengming Zhou
commit dc6e0818bc9a0336d9accf3ea35d146d72aa7a18 upstream. Since cpuacct_charge() is called from the scheduler update_curr(), we must already have rq lock held, then the RCU read lock can be optimized away. And do the same thing in it's wrapper cgroup_account_cputime(), but we can't use lockdep_assert_rq_held() there, which defined in kernel/sched/sched.h. Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220220051426.5274-2-zhouchengming@bytedance.com [OP: adjusted lockdep_assert_rq_held() -> lockdep_assert_held()] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10ata: libata: Rename link flag ATA_LFLAG_NO_DB_DELAYPaul Menzel
[ Upstream commit b9ba367c513dbc165dd6c01266a59db4be2a3564 ] Rename the link flag ATA_LFLAG_NO_DB_DELAY to ATA_LFLAG_NO_DEBOUNCE_DELAY. The new name is longer, but clearer. Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Stable-dep-of: 2a2df98ec592 ("ata: ahci: Add Elkhart Lake AHCI controller") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10locking/seqlock: Do the lockdep annotation before locking in ↵Sebastian Andrzej Siewior
do_write_seqcount_begin_nested() [ Upstream commit 41b43b6c6e30a832c790b010a06772e793bca193 ] It was brought up by Tetsuo that the following sequence: write_seqlock_irqsave() printk_deferred_enter() could lead to a deadlock if the lockdep annotation within write_seqlock_irqsave() triggers. The problem is that the sequence counter is incremented before the lockdep annotation is performed. The lockdep splat would then attempt to invoke printk() but the reader side, of the same seqcount, could have a tty_port::lock acquired waiting for the sequence number to become even again. The other lockdep annotations come before the actual locking because "we want to see the locking error before it happens". There is no reason why seqcount should be different here. Do the lockdep annotation first then perform the locking operation (the sequence increment). Fixes: 1ca7d67cf5d5a ("seqcount: Add lockdep functionality to seqcount/seqlock structures") Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20230920104627._DTHgPyA@linutronix.de Closes: https://lore.kernel.org/20230621130641.-5iueY1I@linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10seqlock: Prefix internal seqcount_t-only macros with a "do_"Ahmed S. Darwish
[ Upstream commit 66bcfcdf89d00f2409f4b5da0f8c20c08318dc72 ] When the seqcount_LOCKNAME_t group of data types were introduced, two classes of seqlock.h sequence counter macros were added: - An external public API which can either take a plain seqcount_t or any of the seqcount_LOCKNAME_t variants. - An internal API which takes only a plain seqcount_t. To distinguish between the two groups, the "*_seqcount_t_*" pattern was used for the latter. This confused a number of mm/ call-site developers, and Linus also commented that it was not a standard practice for marking seqlock.h internal APIs. Distinguish the latter group of macros by prefixing a "do_". Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/CAHk-=wikhGExmprXgaW+MVXG1zsGpztBbVwOb23vetk41EtTBQ@mail.gmail.com Stable-dep-of: 41b43b6c6e30 ("locking/seqlock: Do the lockdep annotation before locking in do_write_seqcount_begin_nested()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10seqlock: Rename __seqprop() usersPeter Zijlstra
[ Upstream commit ab440b2c604b60fe90885270fcfeb5c3dd5d6fae ] More consistent naming should make it easier to untangle the _Generic token pasting maze called __seqprop(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20201110115358.GE2594@hirez.programming.kicks-ass.net Stable-dep-of: 41b43b6c6e30 ("locking/seqlock: Do the lockdep annotation before locking in do_write_seqcount_begin_nested()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10seqlock: avoid -Wshadow warningsArnd Bergmann
[ Upstream commit a07c45312f06e288417049208c344ad76074627d ] When building with W=2, there is a flood of warnings about the seqlock macros shadowing local variables: 19806 linux/seqlock.h:331:11: warning: declaration of 'seq' shadows a previous local [-Wshadow] 48 linux/seqlock.h:348:11: warning: declaration of 'seq' shadows a previous local [-Wshadow] 8 linux/seqlock.h:379:11: warning: declaration of 'seq' shadows a previous local [-Wshadow] Prefix the local variables to make the warning useful elsewhere again. Fixes: 52ac39e5db51 ("seqlock: seqcount_t: Implement all read APIs as statement expressions") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20201026165044.3722931-1-arnd@kernel.org Stable-dep-of: 41b43b6c6e30 ("locking/seqlock: Do the lockdep annotation before locking in do_write_seqcount_begin_nested()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10team: fix null-ptr-deref when team device type is changedZiyang Xuan
[ Upstream commit 492032760127251e5540a5716a70996bacf2a3fd ] Get a null-ptr-deref bug as follows with reproducer [1]. BUG: kernel NULL pointer dereference, address: 0000000000000228 ... RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q] ... Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x82/0x150 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? vlan_dev_hard_header+0x35/0x140 [8021q] ? vlan_dev_hard_header+0x8e/0x140 [8021q] neigh_connected_output+0xb2/0x100 ip6_finish_output2+0x1cb/0x520 ? nf_hook_slow+0x43/0xc0 ? ip6_mtu+0x46/0x80 ip6_finish_output+0x2a/0xb0 mld_sendpack+0x18f/0x250 mld_ifc_work+0x39/0x160 process_one_work+0x1e6/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 [1] $ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}' $ ip link add name t-dummy type dummy $ ip link add link t-dummy name t-dummy.100 type vlan id 100 $ ip link add name t-nlmon type nlmon $ ip link set t-nlmon master team0 $ ip link set t-nlmon nomaster $ ip link set t-dummy up $ ip link set team0 up $ ip link set t-dummy.100 down $ ip link set t-dummy.100 master team0 When enslave a vlan device to team device and team device type is changed from non-ether to ether, header_ops of team device is changed to vlan_header_ops. That is incorrect and will trigger null-ptr-deref for vlan->real_dev in vlan_dev_hard_header() because team device is not a vlan device. Cache eth_header_ops in team_setup(), then assign cached header_ops to header_ops of team net device when its type is changed from non-ether to ether to fix the bug. Fixes: 1d76efe1577b ("team: add support for non-ethernet devices") Suggested-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230918123011.1884401-1-william.xuanziyang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10NFS: Use the correct commit info in nfs_join_page_group()Trond Myklebust
[ Upstream commit b193a78ddb5ee7dba074d3f28dc050069ba083c0 ] Ensure that nfs_clear_request_commit() updates the correct counters when it removes them from the commit list. Fixes: ed5d588fe47f ("NFS: Try to join page groups before an O_DIRECT retransmission") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23ata: libata: disallow dev-initiated LPM transitions to unsupported statesNiklas Cassel
commit 24e0e61db3cb86a66824531989f1df80e0939f26 upstream. In AHCI 1.3.1, the register description for CAP.SSC: "When cleared to ‘0’, software must not allow the HBA to initiate transitions to the Slumber state via agressive link power management nor the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port must be programmed to disallow device initiated Slumber requests." In AHCI 1.3.1, the register description for CAP.PSC: "When cleared to ‘0’, software must not allow the HBA to initiate transitions to the Partial state via agressive link power management nor the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port must be programmed to disallow device initiated Partial requests." Ensure that we always set the corresponding bits in PxSCTL.IPM, such that a device is not allowed to initiate transitions to power states which are unsupported by the HBA. DevSleep is always initiated by the HBA, however, for completeness, set the corresponding bit in PxSCTL.IPM such that agressive link power management cannot transition to DevSleep if DevSleep is not supported. sata_link_scr_lpm() is used by libahci, ata_piix and libata-pmp. However, only libahci has the ability to read the CAP/CAP2 register to see if these features are supported. Therefore, in order to not introduce any regressions on ata_piix or libata-pmp, create flags that indicate that the respective feature is NOT supported. This way, the behavior for ata_piix and libata-pmp should remain unchanged. This change is based on a patch originally submitted by Runa Guo-oc. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Fixes: 1152b2617a6e ("libata: implement sata_link_scr_lpm() and make ata_dev_set_feature() global") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-23hw_breakpoint: fix single-stepping when using bpf_overflow_handlerTomislav Novak
[ Upstream commit d11a69873d9a7435fe6a48531e165ab80a8b1221 ] Arm platforms use is_default_overflow_handler() to determine if the hw_breakpoint code should single-step over the breakpoint trigger or let the custom handler deal with it. Since bpf_overflow_handler() currently isn't recognized as a default handler, attaching a BPF program to a PERF_TYPE_BREAKPOINT event causes it to keep firing (the instruction triggering the data abort exception is never skipped). For example: # bpftrace -e 'watchpoint:0x10000:4:w { print("hit") }' -c ./test Attaching 1 probe... hit hit [...] ^C (./test performs a single 4-byte store to 0x10000) This patch replaces the check with uses_default_overflow_handler(), which accounts for the bpf_overflow_handler() case by also testing if one of the perf_event_output functions gets invoked indirectly, via orig_default_handler. Signed-off-by: Tomislav Novak <tnovak@meta.com> Tested-by: Samuel Gosselin <sgosselin@google.com> # arm64 Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/linux-arm-kernel/20220923203644.2731604-1-tnovak@fb.com/ Link: https://lore.kernel.org/r/20230605191923.1219974-1-tnovak@meta.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09Yicong Yang
[ Upstream commit 0242737dc4eb9f6e9a5ea594b3f93efa0b12f28d ] Some HiSilicon SMMU PMCG suffers the erratum 162001900 that the PMU disable control sometimes fail to disable the counters. This will lead to error or inaccurate data since before we enable the counters the counter's still counting for the event used in last perf session. This patch tries to fix this by hardening the global disable process. Before disable the PMU, writing an invalid event type (0xffff) to focibly stop the counters. Correspondingly restore each events on pmu::pmu_enable(). Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20230814124012.58013-1-yangyicong@huawei.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23kernel/fork: beware of __put_task_struct() calling contextWander Lairson Costa
[ Upstream commit d243b34459cea30cfe5f3a9b2feb44e7daff9938 ] Under PREEMPT_RT, __put_task_struct() indirectly acquires sleeping locks. Therefore, it can't be called from an non-preemptible context. One practical example is splat inside inactive_task_timer(), which is called in a interrupt context: CPU: 1 PID: 2848 Comm: life Kdump: loaded Tainted: G W --------- Hardware name: HP ProLiant DL388p Gen8, BIOS P70 07/15/2012 Call Trace: dump_stack_lvl+0x57/0x7d mark_lock_irq.cold+0x33/0xba mark_lock+0x1e7/0x400 mark_usage+0x11d/0x140 __lock_acquire+0x30d/0x930 lock_acquire.part.0+0x9c/0x210 rt_spin_lock+0x27/0xe0 refill_obj_stock+0x3d/0x3a0 kmem_cache_free+0x357/0x560 inactive_task_timer+0x1ad/0x340 __run_hrtimer+0x8a/0x1a0 __hrtimer_run_queues+0x91/0x130 hrtimer_interrupt+0x10f/0x220 __sysvec_apic_timer_interrupt+0x7b/0xd0 sysvec_apic_timer_interrupt+0x4f/0xd0 asm_sysvec_apic_timer_interrupt+0x12/0x20 RIP: 0033:0x7fff196bf6f5 Instead of calling __put_task_struct() directly, we defer it using call_rcu(). A more natural approach would use a workqueue, but since in PREEMPT_RT, we can't allocate dynamic memory from atomic context, the code would become more complex because we would need to put the work_struct instance in the task_struct and initialize it when we allocate a new task_struct. The issue is reproducible with stress-ng: while true; do stress-ng --sched deadline --sched-period 1000000000 \ --sched-runtime 800000000 --sched-deadline \ 1000000000 --mmapfork 23 -t 20 done Reported-by: Hu Chunyu <chuhu@redhat.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Valentin Schneider <vschneid@redhat.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Wander Lairson Costa <wander@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230614122323.37957-2-wander@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19arm64: sdei: abort running SDEI handlers during crashD Scott Phillips
[ Upstream commit 5cd474e57368f0957c343bb21e309cf82826b1ef ] Interrupts are blocked in SDEI context, per the SDEI spec: "The client interrupts cannot preempt the event handler." If we crashed in the SDEI handler-running context (as with ACPI's AGDI) then we need to clean up the SDEI state before proceeding to the crash kernel so that the crash kernel can have working interrupts. Track the active SDEI handler per-cpu so that we can COMPLETE_AND_RESUME the handler, discarding the interrupted context. Fixes: f5df26961853 ("arm64: kernel: Add arch-specific SDEI entry code and CPU masking") Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com> Cc: stable@vger.kernel.org Reviewed-by: James Morse <james.morse@arm.com> Tested-by: Mihai Carabas <mihai.carabas@oracle.com> Link: https://lore.kernel.org/r/20230627002939.2758-1-scott@os.amperecomputing.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19ACPI: APEI: explicit init of HEST and GHES in apci_init()Shuai Xue
[ Upstream commit dc4e8c07e9e2f69387579c49caca26ba239f7270 ] From commit e147133a42cb ("ACPI / APEI: Make hest.c manage the estatus memory pool") was merged, ghes_init() relies on acpi_hest_init() to manage the estatus memory pool. On the other hand, ghes_init() relies on sdei_init() to detect the SDEI version and (un)register events. The dependencies are as follows: ghes_init() => acpi_hest_init() => acpi_bus_init() => acpi_init() ghes_init() => sdei_init() HEST is not PCI-specific and initcall ordering is implicit and not well-defined within a level. Based on above, remove acpi_hest_init() from acpi_pci_root_init() and convert ghes_init() and sdei_init() from initcalls to explicit calls in the following order: acpi_hest_init() ghes_init() sdei_init() Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Stable-dep-of: 5cd474e57368 ("arm64: sdei: abort running SDEI handlers during crash") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19usb: typec: bus: verify partner exists in typec_altmode_attentionRD Babiera
commit f23643306430f86e2f413ee2b986e0773e79da31 upstream. Some usb hubs will negotiate DisplayPort Alt mode with the device but will then negotiate a data role swap after entering the alt mode. The data role swap causes the device to unregister all alt modes, however the usb hub will still send Attention messages even after failing to reregister the Alt Mode. type_altmode_attention currently does not verify whether or not a device's altmode partner exists, which results in a NULL pointer error when dereferencing the typec_altmode and typec_altmode_ops belonging to the altmode partner. Verify the presence of a device's altmode partner before sending the Attention message to the Alt Mode driver. Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230814180559.923475-1-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-19net: handle ARPHRD_PPP in dev_is_mac_header_xmit()Nicolas Dichtel
commit a4f39c9f14a634e4cd35fcd338c239d11fcc73fc upstream. The goal is to support a bpf_redirect() from an ethernet device (ingress) to a ppp device (egress). The l2 header is added automatically by the ppp driver, thus the ethernet header should be removed. CC: stable@vger.kernel.org Fixes: 27b29f63058d ("bpf: add bpf_redirect() helper") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Siwar Zitouni <siwar.zitouni@6wind.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-19bpf: Clear the probe_addr for uprobeYafang Shao
[ Upstream commit 5125e757e62f6c1d5478db4c2b61a744060ddf3f ] To avoid returning uninitialized or random values when querying the file descriptor (fd) and accessing probe_addr, it is necessary to clear the variable prior to its use. Fixes: 41bdc4b40ed6 ("bpf: introduce bpf subcommand BPF_TASK_FD_QUERY") Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20230709025630.3735-6-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19eventfd: Export eventfd_ctx_do_read()David Woodhouse
[ Upstream commit 28f1326710555bbe666f64452d08f2d7dd657cae ] Where events are consumed in the kernel, for example by KVM's irqfd_wakeup() and VFIO's virqfd_wakeup(), they currently lack a mechanism to drain the eventfd's counter. Since the wait queue is already locked while the wakeup functions are invoked, all they really need to do is call eventfd_ctx_do_read(). Add a check for the lock, and export it for them. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20201027135523.646811-2-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Stable-dep-of: 758b49204781 ("eventfd: prevent underflow for eventfd semaphores") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19fs/nls: make load_nls() take a const parameterWinston Wen
[ Upstream commit c1ed39ec116272935528ca9b348b8ee79b0791da ] load_nls() take a char * parameter, use it to find nls module in list or construct the module name to load it. This change make load_nls() take a const parameter, so we don't need do some cast like this: ses->local_nls = load_nls((char *)ctx->local_nls->charset); Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Winston Wen <wentao@uniontech.com> Reviewed-by: Paulo Alcantara <pc@manguebit.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-02module: Expose module_init_layout_section()James Morse
commit 2abcc4b5a64a65a2d2287ba0be5c2871c1552416 upstream. module_init_layout_section() choses whether the core module loader considers a section as init or not. This affects the placement of the exit section when module unloading is disabled. This code will never run, so it can be free()d once the module has been initialised. arm and arm64 need to count the number of PLTs they need before applying relocations based on the section name. The init PLTs are stored separately so they can be free()d. arm and arm64 both use within_module_init() to decide which list of PLTs to use when applying the relocation. Because within_module_init()'s behaviour changes when module unloading is disabled, both architecture would need to take this into account when counting the PLTs. Today neither architecture does this, meaning when module unloading is disabled there are insufficient PLTs in the init section to load some modules, resulting in warnings: | WARNING: CPU: 2 PID: 51 at arch/arm64/kernel/module-plts.c:99 module_emit_plt_entry+0x184/0x1cc | Modules linked in: crct10dif_common | CPU: 2 PID: 51 Comm: modprobe Not tainted 6.5.0-rc4-yocto-standard-dirty #15208 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : module_emit_plt_entry+0x184/0x1cc | lr : module_emit_plt_entry+0x94/0x1cc | sp : ffffffc0803bba60 [...] | Call trace: | module_emit_plt_entry+0x184/0x1cc | apply_relocate_add+0x2bc/0x8e4 | load_module+0xe34/0x1bd4 | init_module_from_file+0x84/0xc0 | __arm64_sys_finit_module+0x1b8/0x27c | invoke_syscall.constprop.0+0x5c/0x104 | do_el0_svc+0x58/0x160 | el0_svc+0x38/0x110 | el0t_64_sync_handler+0xc0/0xc4 | el0t_64_sync+0x190/0x194 Instead of duplicating module_init_layout_section()s logic, expose it. Reported-by: Adam Johnston <adam.johnston@arm.com> Fixes: 055f23b74b20 ("module: check for exit sections in layout_sections() instead of module_init_section()") Cc: stable@vger.kernel.org Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30clk: Fix undefined reference to `clk_rate_exclusive_{get,put}'Biju Das
[ Upstream commit 2746f13f6f1df7999001d6595b16f789ecc28ad1 ] The COMMON_CLK config is not enabled in some of the architectures. This causes below build issues: pwm-rz-mtu3.c:(.text+0x114): undefined reference to `clk_rate_exclusive_put' pwm-rz-mtu3.c:(.text+0x32c): undefined reference to `clk_rate_exclusive_get' Fix these issues by moving clk_rate_exclusive_{get,put} inside COMMON_CLK code block, as clk.c is enabled by COMMON_CLK. Fixes: 55e9b8b7b806 ("clk: add clk_rate_exclusive api") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/all/202307251752.vLfmmhYm-lkp@intel.com/ Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230725175140.361479-1-biju.das.jz@bp.renesas.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30scsi: core: raid_class: Remove raid_component_add()Zhu Wang
commit 60c5fd2e8f3c42a5abc565ba9876ead1da5ad2b7 upstream. The raid_component_add() function was added to the kernel tree via patch "[SCSI] embryonic RAID class" (2005). Remove this function since it never has had any callers in the Linux kernel. And also raid_component_release() is only used in raid_component_add(), so it is also removed. Signed-off-by: Zhu Wang <wangzhu9@huawei.com> Link: https://lore.kernel.org/r/20230822015254.184270-1-wangzhu9@huawei.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Fixes: 04b5b5cb0136 ("scsi: core: Fix possible memory leak if device_add() fails") Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30cgroup/cpuset: Free DL BW in case can_attach() failsDietmar Eggemann
commit 2ef269ef1ac006acf974793d975539244d77b28f upstream. cpuset_can_attach() can fail. Postpone DL BW allocation until all tasks have been checked. DL BW is not allocated per-task but as a sum over all DL tasks migrating. If multiple controllers are attached to the cgroup next to the cpuset controller a non-cpuset can_attach() can fail. In this case free DL BW in cpuset_cancel_attach(). Finally, update cpuset DL task count (nr_deadline_tasks) only in cpuset_attach(). Suggested-by: Waiman Long <longman@redhat.com> Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> [ Fix conflicts in kernel/cgroup/cpuset.c due to new code being applied that is not applicable on this branch. Reject new code. ] Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30sched/deadline: Create DL BW alloc, free & check overflow interfaceDietmar Eggemann
commit 85989106feb734437e2d598b639991b9185a43a6 upstream. While moving a set of tasks between exclusive cpusets, cpuset_can_attach() -> task_can_attach() calls dl_cpu_busy(..., p) for DL BW overflow checking and per-task DL BW allocation on the destination root_domain for the DL tasks in this set. This approach has the issue of not freeing already allocated DL BW in the following error cases: (1) The set of tasks includes multiple DL tasks and DL BW overflow checking fails for one of the subsequent DL tasks. (2) Another controller next to the cpuset controller which is attached to the same cgroup fails in its can_attach(). To address this problem rework dl_cpu_busy(): (1) Split it into dl_bw_check_overflow() & dl_bw_alloc() and add a dedicated dl_bw_free(). (2) dl_bw_alloc() & dl_bw_free() take a `u64 dl_bw` parameter instead of a `struct task_struct *p` used in dl_cpu_busy(). This allows to allocate DL BW for a set of tasks too rather than only for a single task. Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30sched/cpuset: Keep track of SCHED_DEADLINE task in cpusetsJuri Lelli
commit 6c24849f5515e4966d94fa5279bdff4acf2e9489 upstream. Qais reported that iterating over all tasks when rebuilding root domains for finding out which ones are DEADLINE and need their bandwidth correctly restored on such root domains can be a costly operation (10+ ms delays on suspend-resume). To fix the problem keep track of the number of DEADLINE tasks belonging to each cpuset and then use this information (followup patch) to only perform the above iteration if DEADLINE tasks are actually present in the cpuset for which a corresponding root domain is being rebuilt. Reported-by: Qais Yousef (Google) <qyousef@layalina.io> Link: https://lore.kernel.org/lkml/20230206221428.2125324-1-qyousef@layalina.io/ Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> [ Fix conflicts in kernel/cgroup/cpuset.c and kernel/sched/deadline.c due to pulling new fields and functions. Remove new code and match the patch diff. ] Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30sched/cpuset: Bring back cpuset_mutexJuri Lelli
commit 111cd11bbc54850f24191c52ff217da88a5e639b upstream. Turns out percpu_cpuset_rwsem - commit 1243dc518c9d ("cgroup/cpuset: Convert cpuset_mutex to percpu_rwsem") - wasn't such a brilliant idea, as it has been reported to cause slowdowns in workloads that need to change cpuset configuration frequently and it is also not implementing priority inheritance (which causes troubles with realtime workloads). Convert percpu_cpuset_rwsem back to regular cpuset_mutex. Also grab it only for SCHED_DEADLINE tasks (other policies don't care about stable cpusets anyway). Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> [ Fix conflict in kernel/cgroup/cpuset.c due to pulling new functions or comment that don't exist on 5.10 or the usage of different cpu hotplug lock whenever replacing the rwsem with mutex. Remove BUG_ON() for rwsem that doesn't exist on mainline. ] Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30libceph, rbd: ignore addr->type while comparing in some casesIlya Dryomov
[ Upstream commit 313771e80fd253d4b5472e61a2d12b03c5293aa9 ] For libceph, this ensures that libceph instance sharing (share option) continues to work. For rbd, this avoids blocklisting alive lock owners (locker addr is always LEGACY, while watcher addr is ANY in nautilus). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Stable-dep-of: 588159009d5b ("rbd: retrieve and check lock owner twice before blocklisting") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-26x86/ibt: Add ANNOTATE_NOENDBRPeter Zijlstra
[ Upstream commit c8c301abeae58ec756b8fcb2178a632bd3c9e284 ] In order to have objtool warn about code references to !ENDBR instruction, we need an annotation to allow this for non-control-flow instances -- consider text range checks, text patching, or return trampolines etc. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220308154317.578968224@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-26objtool: Add frame-pointer-specific function ignoreJosh Poimboeuf
[ Upstream commit e028c4f7ac7ca8c96126fe46c54ab3d56ffe6a66 ] Add a CONFIG_FRAME_POINTER-specific version of STACK_FRAME_NON_STANDARD() for the case where a function is intentionally missing frame pointer setup, but otherwise needs objtool/ORC coverage when frame pointers are disabled. Link: https://lkml.kernel.org/r/163163047364.489837.17377799909553689661.stgit@devnote2 Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Stable-dep-of: c8c301abeae5 ("x86/ibt: Add ANNOTATE_NOENDBR") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-26net: do not allow gso_size to be set to GSO_BY_FRAGSEric Dumazet
[ Upstream commit b616be6b97688f2f2bd7c4a47ab32f27f94fb2a9 ] One missing check in virtio_net_hdr_to_skb() allowed syzbot to crash kernels again [1] Do not allow gso_size to be set to GSO_BY_FRAGS (0xffff), because this magic value is used by the kernel. [1] general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 0 PID: 5039 Comm: syz-executor401 Not tainted 6.5.0-rc5-next-20230809-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 RIP: 0010:skb_segment+0x1a52/0x3ef0 net/core/skbuff.c:4500 Code: 00 00 00 e9 ab eb ff ff e8 6b 96 5d f9 48 8b 84 24 00 01 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e ea 21 00 00 48 8b 84 24 00 01 RSP: 0018:ffffc90003d3f1c8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 000000000001fffe RCX: 0000000000000000 RDX: 000000000000000e RSI: ffffffff882a3115 RDI: 0000000000000070 RBP: ffffc90003d3f378 R08: 0000000000000005 R09: 000000000000ffff R10: 000000000000ffff R11: 5ee4a93e456187d6 R12: 000000000001ffc6 R13: dffffc0000000000 R14: 0000000000000008 R15: 000000000000ffff FS: 00005555563f2380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020020000 CR3: 000000001626d000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> udp6_ufo_fragment+0x9d2/0xd50 net/ipv6/udp_offload.c:109 ipv6_gso_segment+0x5c4/0x17b0 net/ipv6/ip6_offload.c:120 skb_mac_gso_segment+0x292/0x610 net/core/gso.c:53 __skb_gso_segment+0x339/0x710 net/core/gso.c:124 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x3a5/0xf10 net/core/dev.c:3625 __dev_queue_xmit+0x8f0/0x3d60 net/core/dev.c:4329 dev_queue_xmit include/linux/netdevice.h:3082 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24c7/0x5570 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:727 [inline] sock_sendmsg+0xd9/0x180 net/socket.c:750 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2496 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2550 __sys_sendmsg+0x117/0x1e0 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7ff27cdb34d9 Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Xin Long <lucien.xin@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20230816142158.1779798-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-26mmc: core: add devm_mmc_alloc_hostHeiner Kallweit
[ Upstream commit 80df83c2c57e75cb482ccf0c639ce84703ab41a2 ] Add a device-managed version of mmc_alloc_host(). The argument order is reversed compared to mmc_alloc_host() because device-managed functions typically have the device argument first. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/6d8f9fdc-7c9e-8e4f-e6ef-5470b971c74e@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Stable-dep-of: b8ada54fa1b8 ("mmc: meson-gx: fix deferred probing") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-26usb: gadget: udc: core: Introduce check_config to verify USB configurationWesley Cheng
[ Upstream commit ce7d0008c2356626f69f37ef1afce8fbc83fe142 ] Some UDCs may have constraints on how many high bandwidth endpoints it can support in a certain configuration. This API allows for the composite driver to pass down the total number of endpoints to the UDC so it can verify it has the required resources to support the configuration. Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/1625908395-5498-2-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: dbe678f6192f ("usb: cdns3: fix NCM gadget RX speed 20x slow than expection at iMX8QM") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-26bus: mhi: Add MMIO region length to controller structureBhaumik Bhatt
[ Upstream commit baa7a08569358d9d16e71ce36f287c39a665d776 ] Make controller driver specify the MMIO register region length for range checking of BHI or BHIe space. This can help validate that offsets are in acceptable memory region or not and avoid any boot-up issues due to BHI or BHIe memory accesses. Link: https://lore.kernel.org/r/1620330705-40192-4-git-send-email-bbhatt@codeaurora.org Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210802051255.5771-6-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 6a0c637bfee6 ("bus: mhi: host: Range check CHDBOFF and ERDBOFF") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-26iopoll: Call cpu_relax() in busy loopsGeert Uytterhoeven
[ Upstream commit b407460ee99033503993ac7437d593451fcdfe44 ] It is considered good practice to call cpu_relax() in busy loops, see Documentation/process/volatile-considered-harmful.rst. This can not only lower CPU power consumption or yield to a hyperthreaded twin processor, but also allows an architecture to mitigate hardware issues (e.g. ARM Erratum 754327 for Cortex-A9 prior to r2p0) in the architecture-specific cpu_relax() implementation. In addition, cpu_relax() is also a compiler barrier. It is not immediately obvious that the @op argument "function" will result in an actual function call (e.g. in case of inlining). Where a function call is a C sequence point, this is lost on inlining. Therefore, with agressive enough optimization it might be possible for the compiler to hoist the: (val) = op(args); "load" out of the loop because it doesn't see the value changing. The addition of cpu_relax() would inhibit this. As the iopoll helpers lack calls to cpu_relax(), people are sometimes reluctant to use them, and may fall back to open-coded polling loops (including cpu_relax() calls) instead. Fix this by adding calls to cpu_relax() to the iopoll helpers: - For the non-atomic case, it is sufficient to call cpu_relax() in case of a zero sleep-between-reads value, as a call to usleep_range() is a safe barrier otherwise. However, it doesn't hurt to add the call regardless, for simplicity, and for similarity with the atomic case below. - For the atomic case, cpu_relax() must be called regardless of the sleep-between-reads value, as there is no guarantee all architecture-specific implementations of udelay() handle this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/45c87bec3397fdd704376807f0eec5cc71be440f.1685692810.git.geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-26net/mlx5: Move all internal timer metadata into a dedicated structEran Ben Elisha
[ Upstream commit d6f3dc8f509ce6288e2537eb4b0614ef444fd84a ] Internal timer mode (SW clock) requires some PTP clock related metadata structs. Real time mode (HW clock) will not need these metadata structs. This separation emphasize the different interfaces for HW clock and SW clock. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Stable-dep-of: d00620762565 ("net/mlx5: Skip clock update work when device is in error state") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-16x86/speculation: Add cpu_show_gds() prototypeArnd Bergmann
commit a57c27c7ad85c420b7de44c6ee56692d51709dda upstream. The newly added function has two definitions but no prototypes: drivers/base/cpu.c:605:16: error: no previous prototype for 'cpu_show_gds' [-Werror=missing-prototypes] Add a declaration next to the other ones for this file to avoid the warning. Fixes: 8974eb588283b ("x86/speculation: Add Gather Data Sampling mitigation") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Cc: stable@kernel.org Link: https://lore.kernel.org/all/20230809130530.1913368-1-arnd%40kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11PM / wakeirq: support enabling wake-up irq after runtime_suspend calledChunfeng Yun
[ Upstream commit 259714100d98b50bf04d36a21bf50ca8b829fc11 ] When the dedicated wake IRQ is level trigger, and it uses the device's low-power status as the wakeup source, that means if the device is not in low-power state, the wake IRQ will be triggered if enabled; For this case, need enable the wake IRQ after running the device's ->runtime_suspend() which make it enter low-power state. e.g. Assume the wake IRQ is a low level trigger type, and the wakeup signal comes from the low-power status of the device. The wakeup signal is low level at running time (0), and becomes high level when the device enters low-power state (runtime_suspend (1) is called), a wakeup event at (2) make the device exit low-power state, then the wakeup signal also becomes low level. ------------------ | ^ ^| ---------------- | | -------------- |<---(0)--->|<--(1)--| (3) (2) (4) if enable the wake IRQ before running runtime_suspend during (0), a wake IRQ will arise, it causes resume immediately; it works if enable wake IRQ ( e.g. at (3) or (4)) after running ->runtime_suspend(). This patch introduces a new status WAKE_IRQ_DEDICATED_REVERSE to optionally support enabling wake IRQ after running ->runtime_suspend(). Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Stable-dep-of: 8527beb12087 ("PM: sleep: wakeirq: fix wake irq arming") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-11tracing: Show real address for trace event argumentsMasami Hiramatsu
[ Upstream commit efbbdaa22bb78761bff8dfdde027ad04bedd47ce ] To help debugging kernel, show real address for trace event arguments in tracefs/trace{,pipe} instead of hashed pointer value. Since ftrace human-readable format uses vsprintf(), all %p are translated to hash values instead of pointer address. However, when debugging the kernel, raw address value gives a hint when comparing with the memory mapping in the kernel. (Those are sometimes used with crash log, which is not hashed too) So converting %p with %px when calling trace_seq_printf(). Moreover, this is not improving the security because the tracefs can be used only by root user and the raw address values are readable from tracefs/percpu/cpu*/trace_pipe_raw file. Link: https://lkml.kernel.org/r/160277370703.29307.5134475491761971203.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Stable-dep-of: d5a821896360 ("tracing: Fix memory leak of iter->temp when reading trace_pipe") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-08x86/srso: Add a Speculative RAS Overflow mitigationBorislav Petkov (AMD)
Upstream commit: fb3bd914b3ec28f5fb697ac55c4846ac2d542855 Add a mitigation for the speculative return address stack overflow vulnerability found on AMD processors. The mitigation works by ensuring all RET instructions speculate to a controlled location, similar to how speculation is controlled in the retpoline sequence. To accomplish this, the __x86_return_thunk forces the CPU to mispredict every function return using a 'safe return' sequence. To ensure the safety of this mitigation, the kernel must ensure that the safe return sequence is itself free from attacker interference. In Zen3 and Zen4, this is accomplished by creating a BTB alias between the untraining function srso_untrain_ret_alias() and the safe return function srso_safe_ret_alias() which results in evicting a potentially poisoned BTB entry and using that safe one for all function returns. In older Zen1 and Zen2, this is accomplished using a reinterpretation technique similar to Retbleed one: srso_untrain_ret() and srso_safe_ret(). Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-08mm: Move mm_cachep initialization to mm_init()Peter Zijlstra
commit af80602799681c78f14fbe20b6185a56020dedee upstream. In order to allow using mm_alloc() much earlier, move initializing mm_cachep into mm_init(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221025201057.751153381@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-08x86/mm: Use mm_alloc() in poking_init()Peter Zijlstra
commit 3f4c8211d982099be693be9aa7d6fc4607dff290 upstream. Instead of duplicating init_mm, allocate a fresh mm. The advantage is that mm_alloc() has much simpler dependencies. Additionally it makes more conceptual sense, init_mm has no (and must not have) user state to duplicate. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221025201057.816175235@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-08init: Provide arch_cpu_finalize_init()Thomas Gleixner
commit 7725acaa4f0c04fbefb0e0d342635b967bb7d414 upstream check_bugs() has become a dumping ground for all sorts of activities to finalize the CPU initialization before running the rest of the init code. Most are empty, a few do actual bug checks, some do alternative patching and some cobble a CPU advertisement string together.... Aside of that the current implementation requires duplicated function declaration and mostly empty header files for them. Provide a new function arch_cpu_finalize_init(). Provide a generic declaration if CONFIG_ARCH_HAS_CPU_FINALIZE_INIT is selected and a stub inline otherwise. This requires a temporary #ifdef in start_kernel() which will be removed along with check_bugs() once the architectures are converted over. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230613224544.957805717@linutronix.de Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27tcp: annotate data-races around fastopenq.max_qlenEric Dumazet
[ Upstream commit 70f360dd7042cb843635ece9d28335a4addff9eb ] This field can be read locklessly. Fixes: 1536e2857bd3 ("tcp: Add a TCP_FASTOPEN socket option to get a max backlog on its listner") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230719212857.3943972-12-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27posix-timers: Ensure timer ID search-loop limit is validThomas Gleixner
[ Upstream commit 8ce8849dd1e78dadcee0ec9acbd259d239b7069f ] posix_timer_add() tries to allocate a posix timer ID by starting from the cached ID which was stored by the last successful allocation. This is done in a loop searching the ID space for a free slot one by one. The loop has to terminate when the search wrapped around to the starting point. But that's racy vs. establishing the starting point. That is read out lockless, which leads to the following problem: CPU0 CPU1 posix_timer_add() start = sig->posix_timer_id; lock(hash_lock); ... posix_timer_add() if (++sig->posix_timer_id < 0) start = sig->posix_timer_id; sig->posix_timer_id = 0; So CPU1 can observe a negative start value, i.e. -1, and the loop break never happens because the condition can never be true: if (sig->posix_timer_id == start) break; While this is unlikely to ever turn into an endless loop as the ID space is huge (INT_MAX), the racy read of the start value caught the attention of KCSAN and Dmitry unearthed that incorrectness. Rewrite it so that all id operations are under the hash lock. Reported-by: syzbot+5c54bd3eb218bb595aa9@syzkaller.appspotmail.com Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/87bkhzdn6g.ffs@tglx Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-15 08:25:57 +0000