| Age | Commit message (Collapse) | Author |
|---|
|
commit 9e05e5c7ee8758141d2db7e8fea2cab34500c6ed upstream.
Prior to commit d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of
ucounts") UCOUNT_RLIMIT_SIGPENDING rlimit was not enforced for a class of
signals. However now it's enforced unconditionally, even if
override_rlimit is set. This behavior change caused production issues.
For example, if the limit is reached and a process receives a SIGSEGV
signal, sigqueue_alloc fails to allocate the necessary resources for the
signal delivery, preventing the signal from being delivered with siginfo.
This prevents the process from correctly identifying the fault address and
handling the error. From the user-space perspective, applications are
unaware that the limit has been reached and that the siginfo is
effectively 'corrupted'. This can lead to unpredictable behavior and
crashes, as we observed with java applications.
Fix this by passing override_rlimit into inc_rlimit_get_ucounts() and skip
the comparison to max there if override_rlimit is set. This effectively
restores the old behavior.
Link: https://lkml.kernel.org/r/20241104195419.3962584-1-roman.gushchin@linux.dev
Fixes: d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of ucounts")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Co-developed-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Andrei Vagin <avagin@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Alexey Gladkov <legion@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b5413156bad91dc2995a5c4eab1b05e56914638a ]
When cloning a new thread, its posix_cputimers are not inherited, and
are cleared by posix_cputimers_init(). However, this does not clear the
tick dependency it creates in tsk->tick_dep_mask, and the handler does
not reach the code to clear the dependency if there were no timers to
begin with.
Thus if a thread has a cputimer running before clone/fork, all
descendants will prevent nohz_full unless they create a cputimer of
their own.
Fix this by entirely clearing the tick_dep_mask in copy_process().
(There is currently no inherited state that needs a tick dependency)
Process-wide timers do not have this problem because fork does not copy
signal_struct as a baseline, it creates one from scratch.
Fixes: b78783000d5c ("posix-cpu-timers: Migrate to use new tick dependency mask model")
Signed-off-by: Ben Segall <bsegall@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/xm26o737bq8o.fsf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3db63daabe210af32a09533fe7d8d47c711a103c ]
NFSv3 includes pre/post wcc attributes which allow the client to
determine if all changes to the file have been made by the client
itself, or if any might have been made by some other client.
If there are gaps in the pre/post ctime sequence it must be assumed that
some other client changed the file in that gap and the local cache must
be suspect. The next time the file is opened the cache should be
invalidated.
Since Commit 1c341b777501 ("NFS: Add deferred cache invalidation for
close-to-open consistency violations") in linux 5.3 the Linux client has
been triggering this invalidation. The chunk in nfs_update_inode() in
particularly triggers.
Unfortunately Linux NFS assumes that all replies will be processed in
the order sent, and will arrive in the order processed. This is not
true in general. Consequently Linux NFS might ignore the wcc info in a
WRITE reply because the reply is in response to a WRITE that was sent
before some other request for which a reply has already been seen. This
is detected by Linux using the gencount tests in nfs_inode_attr_cmp().
Also, when the gencount tests pass it is still possible that the request
were processed on the server in a different order, and a gap seen in
the ctime sequence might be filled in by a subsequent reply, so gaps
should not immediately trigger delayed invalidation.
The net result is that writing to a server and then reading the file
back can result in going to the server for the read rather than serving
it from cache - all because a couple of replies arrived out-of-order.
This is a performance regression over kernels before 5.3, though the
change in 5.3 is a correctness improvement.
This has been seen with Linux writing to a Netapp server which
occasionally re-orders requests. In testing the majority of requests
were in-order, but a few (maybe 2 or three at a time) could be
re-ordered.
This patch addresses the problem by recording any gaps seen in the
pre/post ctime sequence and not triggering invalidation until either
there are too many gaps to fit in the table, or until there are no more
active writes and the remaining gaps cannot be resolved.
We allocate a table of 16 gaps on demand. If the allocation fails we
revert to current behaviour which is of little cost as we are unlikely
to be able to cache the writes anyway.
In the table we store "start->end" pair when iversion is updated and
"end<-start" pairs pre/post pairs reported by the server. Usually these
exactly cancel out and so nothing is stored. When there are
out-of-order replies we do store gaps and these will eventually be
cancelled against later replies when this client is the only writer.
If the final write is out-of-order there may be one gap remaining when
the file is closed. This will be noticed and if there is precisely on
gap and if the iversion can be advanced to match it, then we do so.
This patch makes no attempt to handle directories correctly. The same
problem potentially exists in the out-of-order replies to create/unlink
requests can cause future lookup requires to be sent to the server
unnecessarily. A similar scheme using the same primitives could be used
to notice and handle out-of-order replies.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Stable-dep-of: 867da60d463b ("nfs: avoid i_lock contention in nfs_clear_invalid_mapping")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 64c8902ed4418317cd416c566f896bd4a92b2efc ]
This is a preparation patch to batch the folio unmapping and moving.
In this patch, unmap_and_move() is split to migrate_folio_unmap() and
migrate_folio_move(). So, we can batch _unmap() and _move() in different
loops later. To pass some information between unmap and move, the
original unused dst->mapping and dst->private are used.
Link: https://lkml.kernel.org/r/20230213123444.155149-5-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 35e41024c4c2 ("vmscan,migrate: fix page count imbalance on node stats when demoting pages")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ed0360bbab72b829437b67ebb2f9cfac19f59dfe ]
aio, io_uring, cachefiles and overlayfs, all open code an ugly variant
of file_{start,end}_write() to silence lockdep warnings.
Create helpers for this lockdep dance so we can use the helpers in all
the callers.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-4-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 1d60d74e8526 ("io_uring/rw: fix missing NOWAIT check for O_DIRECT start write")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 894b00a3350c560990638bdf89bdf1f3d5491950 ]
Per [1], -fsanitize=kernel-hwaddress with GCC currently does not disable
instrumentation in functions with __attribute__((no_sanitize_address)).
However, __attribute__((no_sanitize("hwaddress"))) does correctly
disable instrumentation. Use it instead.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117196 [1]
Link: https://lore.kernel.org/r/000000000000f362e80620e27859@google.com
Link: https://lore.kernel.org/r/ZvFGwKfoC4yVjN_X@J2N7QTR9R3
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218854
Reported-by: syzbot+908886656a02769af987@syzkaller.appspotmail.com
Tested-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrew Pinski <pinskia@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Fixes: 7b861a53e46b ("kasan: Bump required compiler version")
Link: https://lore.kernel.org/r/20241021120013.3209481-1-elver@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ae37a9a2c2d0960d643d782b426ea1aa9c05727a ]
The attribute was added in GCC 4.8, while the minimum GCC version
supported by the kernel is GCC 5.1.
Therefore, remove the check.
Link: https://godbolt.org/z/84v56vcn8
Link: https://lkml.kernel.org/r/20221021115956.9947-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Li <ashimida@linux.alibaba.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 894b00a3350c ("kasan: Fix Software Tag-Based KASAN with GCC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6e2be1f2ebcea42ed6044432f72f32434e60b34d ]
Patch series "compiler-gcc: be consistent with underscores use for
`no_sanitize`".
This patch (of 5):
Other macros that define shorthands for attributes in e.g.
`compiler_attributes.h` and elsewhere use underscores.
Link: https://lkml.kernel.org/r/20221021115956.9947-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Li <ashimida@linux.alibaba.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 894b00a3350c ("kasan: Fix Software Tag-Based KASAN with GCC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6db388585e486c0261aeef55f8bc63a9b45756c0 ]
iomap_want_unshare_iter currently sits in fs/iomap/buffered-io.c, which
depends on CONFIG_BLOCK. It is also in used in fs/dax.c whіch has no
such dependency. Given that it is a trivial check turn it into an inline
in include/linux/iomap.h to fix the DAX && !BLOCK build.
Fixes: 6ef6a0e821d3 ("iomap: share iomap_unshare_iter predicate code with fsdax")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241015041350.118403-1-hch@lst.de
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6ef6a0e821d3dad6bf8a5d5508762dba9042c84b ]
The predicate code that iomap_unshare_iter uses to decide if it's really
needs to unshare a file range mapping should be shared with the fsdax
version, because right now they're opencoded and inconsistent.
Note that we simplify the predicate logic a bit -- we no longer allow
unsharing of inline data mappings, but there aren't any filesystems that
allow shared inline data currently.
This is a fix in the sense that it should have been ported to fsdax.
Fixes: b53fdb215d13 ("iomap: improve shared block detection in iomap_unshare_iter")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/172796813294.1131942.15762084021076932620.stgit@frogsfrogsfrogs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 50793801fc7f ("fsdax: dax_unshare_iter needs to copy entire blocks")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c0f02536fffbbec71aced36d52a765f8c4493dc2 ]
In the parse_perf_domain function, if the call to
of_parse_phandle_with_args returns an error, then the reference to the
CPU device node that was acquired at the start of the function would not
be properly decremented.
Address this by declaring the variable with the __free(device_node)
cleanup attribute.
Signed-off-by: Miquel Sabaté Solà <mikisabate@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20240917134246.584026-1-mikisabate@gmail.com
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d182dc6de93225cd853de4db68a1a77501bedb6e ]
of_perf_domain_get_sharing_cpumask currently assumes a 1-argument
phandle format, and directly returns the argument. Generalize this to
return the full of_phandle_args, so it can be used by drivers which use
other phandle styles (e.g. separate nodes). This also requires changing
the CPU sharing match to compare the full args structure.
Also, make sure to of_node_put(args.np) (the original code was leaking a
reference).
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Stable-dep-of: c0f02536fffb ("cpufreq: Avoid a bad reference count on CPU node")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 95ecba62e2fd201bcdcca636f5d774f1cd4f1458 ]
Some workloads hit the infamous dev_watchdog() message:
"NETDEV WATCHDOG: eth0 (xxxx): transmit queue XX timed out"
It seems possible to hit this even for perfectly normal
BQL enabled drivers:
1) Assume a TX queue was idle for more than dev->watchdog_timeo
(5 seconds unless changed by the driver)
2) Assume a big packet is sent, exceeding current BQL limit.
3) Driver ndo_start_xmit() puts the packet in TX ring,
and netdev_tx_sent_queue() is called.
4) QUEUE_STATE_STACK_XOFF could be set from netdev_tx_sent_queue()
before txq->trans_start has been written.
5) txq->trans_start is written later, from netdev_start_xmit()
if (rc == NETDEV_TX_OK)
txq_trans_update(txq)
dev_watchdog() running on another cpu could read the old
txq->trans_start, and then see QUEUE_STATE_STACK_XOFF, because 5)
did not happen yet.
To solve the issue, write txq->trans_start right before one XOFF bit
is set :
- _QUEUE_STATE_DRV_XOFF from netif_tx_stop_queue()
- __QUEUE_STATE_STACK_XOFF from netdev_tx_sent_queue()
From dev_watchdog(), we have to read txq->state before txq->trans_start.
Add memory barriers to enforce correct ordering.
In the future, we could avoid writing over txq->trans_start for normal
operations, and rename this field to txq->xoff_start_time.
Fixes: bec251bc8b6a ("net: no longer stop all TX queues in dev_watchdog()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241015194118.3951657-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c91c46de6bbc1147ae5dfe046b87f5f3d6593215 ]
A lot of drivers follow the same scheme to stop / start queues
without introducing locks between xmit and NAPI tx completions.
I'm guessing they all copy'n'paste each other's code.
The original code dates back all the way to e1000 and Linux 2.6.19.
Smaller drivers shy away from the scheme and introduce a lock
which may cause deadlocks in netpoll.
Provide macros which encapsulate the necessary logic.
The macros do not prevent false wake ups, the extra barrier
required to close that race is not worth it. See discussion in:
https://lore.kernel.org/all/c39312a2-4537-14b4-270c-9fe1fbb91e89@gmail.com/
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 95ecba62e2fd ("net: fix races in netdev_tx_sent_queue()/dev_watchdog()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 968d64578ec92968e8c79d766eb966efd1f68d7e ]
Convert uart_handle_cts_change() to bool which is more appropriate
than unsigned int.
Rename status to active to better describe what the parameter means.
While at it, make the comment about the active parameter easier to
parse.
Cleanup callsites from operations that are not necessary with bool.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230117090358.4796-10-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 40d7903386df ("serial: imx: Update mctrl old_status on RTSD interrupt")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0388a152fc5544be82e736343496f99c4eef8d62 ]
Convert status parameter for ->dcd_change() and
uart_handle_dcd_change() to bool which matches to how the parameter is
used.
Rename status to active to better describe what the parameter means.
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230117090358.4796-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 40d7903386df ("serial: imx: Update mctrl old_status on RTSD interrupt")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f0db885fb05d35befa81896db6b19eb3ee9ccdfe ]
USB3.2 spec section 9.2.5.4 quotes that a function may signal that
it wants to exit from Function Suspend by sending a Function
Wake Notification to the host if it is enabled for function
remote wakeup. Add an api in composite layer that can be used
by the function drivers to support this feature. Also expose
a gadget op so that composite layer can trigger a wakeup request
to the UDC driver.
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Link: https://lore.kernel.org/r/1679694482-16430-4-git-send-email-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 705e3ce37bcc ("usb: dwc3: core: Fix system suspend on TI AM62 platforms")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 1442ee0011983f0c5c4b92380e6853afb513841a upstream.
Kunkun Jiang reported that there is a small window of opportunity for
userspace to force a change of affinity for a VPE while the VPE has already
been unmapped, but the corresponding doorbell interrupt still visible in
/proc/irq/.
Plug the race by checking the value of vmapp_count, which tracks whether
the VPE is mapped ot not, and returning an error in this case.
This involves making vmapp_count common to both GICv4.1 and its v4.0
ancestor.
Fixes: 64edfaa9a234 ("irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP")
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/c182ece6-2ba0-ce4f-3404-dba7a3ab6c52@huawei.com
Link: https://lore.kernel.org/all/20241002204959.2051709-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1d7b2ce43d2c22a21dadaf689cb36a69570346a6 upstream.
Fix the build warnings when CONFIG_FSL_ENETC_MDIO is not enabled.
The detailed warnings are shown as follows.
include/linux/fsl/enetc_mdio.h:62:18: warning: no previous prototype for function 'enetc_hw_alloc' [-Wmissing-prototypes]
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
include/linux/fsl/enetc_mdio.h:62:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
| static
8 warnings generated.
Fixes: 6517798dd343 ("enetc: Make MDIO accessors more generic and export to include/linux/fsl")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410102136.jQHZOcS4-lkp@intel.com/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241011030103.392362-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a848c29e3486189aaabd5663bc11aea50c5bd144 ]
On the node of an NFS client, some files saved in the mountpoint of the
NFS server were copied to another location of the same NFS server.
Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference
crash with the following syslog:
[232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116
[232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116
[232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058
[232066.588586] Mem abort info:
[232066.588701] ESR = 0x0000000096000007
[232066.588862] EC = 0x25: DABT (current EL), IL = 32 bits
[232066.589084] SET = 0, FnV = 0
[232066.589216] EA = 0, S1PTW = 0
[232066.589340] FSC = 0x07: level 3 translation fault
[232066.589559] Data abort info:
[232066.589683] ISV = 0, ISS = 0x00000007
[232066.589842] CM = 0, WnR = 0
[232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400
[232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000
[232066.590757] Internal error: Oops: 96000007 [#1] SMP
[232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2
[232066.591052] vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs
[232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1
[232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06
[232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4]
[232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4]
[232066.598595] sp : ffff8000f568fc70
[232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000
[232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001
[232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050
[232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000
[232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000
[232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6
[232066.600498] x11: 0000000000000000 x10: 0000000000000008 x9 : ffff8000054e5828
[232066.600784] x8 : 00000000ffffffbf x7 : 0000000000000001 x6 : 000000000a9eb14a
[232066.601062] x5 : 0000000000000000 x4 : ffff70ff8a14a800 x3 : 0000000000000058
[232066.601348] x2 : 0000000000000001 x1 : 54dce46366daa6c6 x0 : 0000000000000000
[232066.601636] Call trace:
[232066.601749] nfs4_reclaim_open_state+0x220/0x800 [nfsv4]
[232066.601998] nfs4_do_reclaim+0x1b8/0x28c [nfsv4]
[232066.602218] nfs4_state_manager+0x928/0x10f0 [nfsv4]
[232066.602455] nfs4_run_state_manager+0x78/0x1b0 [nfsv4]
[232066.602690] kthread+0x110/0x114
[232066.602830] ret_from_fork+0x10/0x20
[232066.602985] Code: 1400000d f9403f20 f9402e61 91016003 (f9402c00)
[232066.603284] SMP: stopping secondary CPUs
[232066.606936] Starting crashdump kernel...
[232066.607146] Bye!
Analysing the vmcore, we know that nfs4_copy_state listed by destination
nfs_server->ss_copies was added by the field copies in handle_async_copy(),
and we found a waiting copy process with the stack as:
PID: 3511963 TASK: ffff710028b47e00 CPU: 0 COMMAND: "cp"
#0 [ffff8001116ef740] __switch_to at ffff8000081b92f4
#1 [ffff8001116ef760] __schedule at ffff800008dd0650
#2 [ffff8001116ef7c0] schedule at ffff800008dd0a00
#3 [ffff8001116ef7e0] schedule_timeout at ffff800008dd6aa0
#4 [ffff8001116ef860] __wait_for_common at ffff800008dd166c
#5 [ffff8001116ef8e0] wait_for_completion_interruptible at ffff800008dd1898
#6 [ffff8001116ef8f0] handle_async_copy at ffff8000055142f4 [nfsv4]
#7 [ffff8001116ef970] _nfs42_proc_copy at ffff8000055147c8 [nfsv4]
#8 [ffff8001116efa80] nfs42_proc_copy at ffff800005514cf0 [nfsv4]
#9 [ffff8001116efc50] __nfs4_copy_file_range.constprop.0 at ffff8000054ed694 [nfsv4]
The NULL-pointer dereference was due to nfs42_complete_copies() listed
the nfs_server->ss_copies by the field ss_copies of nfs4_copy_state.
So the nfs4_copy_state address ffff0100f98fa3f0 was offset by 0x10 and
the data accessed through this pointer was also incorrect. Generally,
the ordered list nfs4_state_owner->so_states indicate open(O_RDWR) or
open(O_WRITE) states are reclaimed firstly by nfs4_reclaim_open_state().
When destination state reclaim is failed with NFS_STATE_RECOVERY_FAILED
and copies are not deleted in nfs_server->ss_copies, the source state
may be passed to the nfs42_complete_copies() process earlier, resulting
in this crash scene finally. To solve this issue, we add a list_head
nfs_server->ss_src_copies for a server-to-server copy specially.
Fixes: 0e65a32c8a56 ("NFS: handle source server reboot")
Signed-off-by: Yanjun Zhang <zhangyanjun@cestc.cn>
Reviewed-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9246b487ab3c3b5993aae7552b7a4c541cc14a49 ]
Add DMA support for audio function of Glenfly Arise chip, which uses
Requester ID of function 0.
Link: https://lore.kernel.org/r/CA2BBD087345B6D1+20240823095708.3237375-1-wangyuli@uniontech.com
Signed-off-by: SiyuLi <siyuli@glenfly.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
[bhelgaas: lower-case hex to match local code, drop unused Device IDs]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8d3cefaf659265aa82b0373a563fdb9d16a2b947 ]
Krzysztof reported an issue [0] which is caused by parallel attempts to
instantiate the same I2C client device. This can happen if driver
supports auto-detection, but certain devices are also instantiated
explicitly.
The original change isn't actually wrong, it just revealed that I2C core
isn't prepared yet to handle this scenario.
Calls to i2c_new_client_device() can be nested, therefore we can't use a
simple mutex here. Parallel instantiation of devices at different addresses
is ok, so we just have to prevent parallel instantiation at the same address.
We can use a bitmap with one bit per 7-bit I2C client address, and atomic
bit operations to set/check/clear bits.
Now a parallel attempt to instantiate a device at the same address will
result in -EBUSY being returned, avoiding the "sysfs: cannot create duplicate
filename" splash.
Note: This patch version includes small cosmetic changes to the Tested-by
version, only functional change is that address locking is supported
for slave addresses too.
[0] https://lore.kernel.org/linux-i2c/9479fe4e-eb0c-407e-84c0-bd60c15baf74@ans.pl/T/#m12706546e8e2414d8f1a0dc61c53393f731685cc
Fixes: caba40ec3531 ("eeprom: at24: Probe for DDR3 thermal sensor in the SPD case")
Cc: stable@vger.kernel.org
Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 73febd775bdbdb98c81255ff85773ac410ded5c4 ]
Two drivers already implement custom debugfs handling for their
i2c_adapter and more will come. So, let the core create a debugfs
directory per adapter and pass that to drivers for their debugfs files.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 8d3cefaf6592 ("i2c: core: Lock address during client device instantiation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 678379e1d4f7443b170939525d3312cfc37bf86b upstream.
Cloning a descriptor table picks the size that would cover all currently
opened files. That's fine for clone() and unshare(), but for close_range()
there's an additional twist - we clone before we close, and it would be
a shame to have
close_range(3, ~0U, CLOSE_RANGE_UNSHARE)
leave us with a huge descriptor table when we are not going to keep
anything past stderr, just because some large file descriptor used to
be open before our call has taken it out.
Unfortunately, it had been dealt with in an inherently racy way -
sane_fdtable_size() gets a "don't copy anything past that" argument
(passed via unshare_fd() and dup_fd()), close_range() decides how much
should be trimmed and passes that to unshare_fd().
The problem is, a range that used to extend to the end of descriptor
table back when close_range() had looked at it might very well have stuff
grown after it by the time dup_fd() has allocated a new files_struct
and started to figure out the capacity of fdtable to be attached to that.
That leads to interesting pathological cases; at the very least it's a
QoI issue, since unshare(CLONE_FILES) is atomic in a sense that it takes
a snapshot of descriptor table one might have observed at some point.
Since CLOSE_RANGE_UNSHARE close_range() is supposed to be a combination
of unshare(CLONE_FILES) with plain close_range(), ending up with a
weird state that would never occur with unshare(2) is confusing, to put
it mildly.
It's not hard to get rid of - all it takes is passing both ends of the
range down to sane_fdtable_size(). There we are under ->files_lock,
so the race is trivially avoided.
So we do the following:
* switch close_files() from calling unshare_fd() to calling
dup_fd().
* undo the calling convention change done to unshare_fd() in
60997c3d45d9 "close_range: add CLOSE_RANGE_UNSHARE"
* introduce struct fd_range, pass a pointer to that to dup_fd()
and sane_fdtable_size() instead of "trim everything past that point"
they are currently getting. NULL means "we are not going to be punching
any holes"; NR_OPEN_MAX is gone.
* make sane_fdtable_size() use find_last_bit() instead of
open-coding it; it's easier to follow that way.
* while we are at it, have dup_fd() report errors by returning
ERR_PTR(), no need to use a separate int *errorp argument.
Fixes: 60997c3d45d9 "close_range: add CLOSE_RANGE_UNSHARE"
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Upstream commit ff53cd52d9bdbf4074d2bbe9b591729997780bd3.
The "integrity" kobject only acted as a holder for static sysfs entries.
It also was embedded into struct gendisk without managing it, violating
assumptions of the driver core.
Instead register the sysfs entries directly onto the struct device.
Also drop the now unused member integrity_kobj from struct gendisk.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230309-kobj_release-gendisk_integrity-v3-3-ceccb4493c46@weissschuh.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[cascardo: conflict because of constification of integrity_ktype]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cfa7f3d2c526c224a6271cc78a4a27a0de06f4f0 ]
When tracing user functions with uprobe functionality, it's common to
install the probe (e.g., a BPF program) at the first instruction of the
function. This is often going to be `push %rbp` instruction in function
preamble, which means that within that function frame pointer hasn't
been established yet. This leads to consistently missing an actual
caller of the traced function, because perf_callchain_user() only
records current IP (capturing traced function) and then following frame
pointer chain (which would be caller's frame, containing the address of
caller's caller).
So when we have target_1 -> target_2 -> target_3 call chain and we are
tracing an entry to target_3, captured stack trace will report
target_1 -> target_3 call chain, which is wrong and confusing.
This patch proposes a x86-64-specific heuristic to detect `push %rbp`
(`push %ebp` on 32-bit architecture) instruction being traced. Given
entire kernel implementation of user space stack trace capturing works
under assumption that user space code was compiled with frame pointer
register (%rbp/%ebp) preservation, it seems pretty reasonable to use
this instruction as a strong indicator that this is the entry to the
function. In that case, return address is still pointed to by %rsp/%esp,
so we fetch it and add to stack trace before proceeding to unwind the
rest using frame pointer-based logic.
We also check for `endbr64` (for 64-bit modes) as another common pattern
for function entry, as suggested by Josh Poimboeuf. Even if we get this
wrong sometimes for uprobes attached not at the function entry, it's OK
because stack trace will still be overall meaningful, just with one
extra bogus entry. If we don't detect this, we end up with guaranteed to
be missing caller function entry in the stack trace, which is worse
overall.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240729175223.23914-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d984648e428bf88cbd94ebe346c73632cb92fffb ]
Implement unshare in fsdax mode: copy data from srcmap to iomap.
Link: https://lkml.kernel.org/r/1669908753-169-1-git-send-email-ruansy.fnst@fujitsu.com
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: a311a08a4237 ("iomap: constrain the file range passed to iomap_file_unshare")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a4864671ca0bf51c8e78242951741df52c06766f upstream.
It can be used after xas_load to check the order of loaded entries.
Compared to xa_get_order, it saves an XA_STATE and avoid a rewalk.
Added new test for xas_get_order, to make the test work, we have to export
xas_get_order with EXPORT_SYMBOL_GPL.
Also fix a sparse warning by checking the slot value with xa_entry instead
of accessing it directly, as suggested by Matthew Wilcox.
[kasong@tencent.com: simplify comment, sparse warning fix, per Matthew Wilcox]
Link: https://lkml.kernel.org/r/20240416071722.45997-4-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20240415171857.19244-4-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 6758c1128ceb ("mm/filemap: optimize filemap folio adding")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 04e906839a053f092ef53f4fb2d610983412b904 upstream.
The work can submit URBs and the URBs can schedule the work.
This cycle needs to be broken, when a device is to be stopped.
Use a flag to do so.
This is a design issue as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/20240919123525.688065-1-oneukum@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 42c3732fa8073717dd7d924472f1c0bc5b452fdc upstream.
De-duplicate the same functionality in several places by hoisting
the is_dot_dotdot() utility function into linux/fs.h.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5e68470f4e80a4120e9ecec408f6ab4ad386bd4a ]
Add eventfd for the vdpa callback so that user
can signal it directly instead of triggering the
callback. It will be used for vhost-vdpa case.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20230323053043.35-9-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Stable-dep-of: 02e9e9366fef ("vhost_vdpa: assign irq bypass producer token correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 65f666c6203600053478ce8e34a1db269a8701c9 ]
When called from sbitmap_queue_get(), sbitmap_deferred_clear() may be run
with preempt disabled. In RT kernel, spin_lock() can sleep, then warning
of "BUG: sleeping function called from invalid context" can be triggered.
Fix it by replacing it with raw_spin_lock.
Cc: Yang Yang <yang.yang@vivo.com>
Fixes: 72d04bdcf3f7 ("sbitmap: fix io hung due to race on sbitmap_word::cleared")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yang Yang <yang.yang@vivo.com>
Link: https://lore.kernel.org/r/20240919021709.511329-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 884ee6dc85b959bc152f15bca80c30f06069e6c4 ]
syzbot reports a f2fs bug as below:
kernel BUG at fs/f2fs/inode.c:896!
RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896
Call Trace:
evict+0x532/0x950 fs/inode.c:704
dispose_list fs/inode.c:747 [inline]
evict_inodes+0x5f9/0x690 fs/inode.c:797
generic_shutdown_super+0x9d/0x2d0 fs/super.c:627
kill_block_super+0x44/0x90 fs/super.c:1696
kill_f2fs_super+0x344/0x690 fs/f2fs/super.c:4898
deactivate_locked_super+0xc4/0x130 fs/super.c:473
cleanup_mnt+0x41f/0x4b0 fs/namespace.c:1373
task_work_run+0x24f/0x310 kernel/task_work.c:228
ptrace_notify+0x2d2/0x380 kernel/signal.c:2402
ptrace_report_syscall include/linux/ptrace.h:415 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline]
syscall_exit_work+0xc6/0x190 kernel/entry/common.c:173
syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline]
syscall_exit_to_user_mode+0x279/0x370 kernel/entry/common.c:218
do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896
Online repaire on corrupted directory in f2fs_lookup() can generate
dirty data/meta while racing w/ readonly remount, it may leave dirty
inode after filesystem becomes readonly, however, checkpoint() will
skips flushing dirty inode in a state of readonly mode, result in
above panic.
Let's get rid of online repaire in f2fs_lookup(), and leave the work
to fsck.f2fs.
Fixes: 510022a85839 ("f2fs: add F2FS_INLINE_DOTS to recover missing dot dentries")
Reported-by: syzbot+ebea2790904673d7c618@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000a7b20f061ff2d56a@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 564d73c4d9201526bd976b9379d2aaf1a7133e84 ]
Add i2c_get_match_data() to get match data for I2C, ACPI and
DT-based matching, so that we can optimize the driver code.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
[wsa: simplified var initialization]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 119abf7d1815 ("hwmon: (max16065) Fix alarm attributes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e575d3a6dd22123888defb622b1742aa2d45b942 ]
TSAR is the correct spelling (Transmit Scheduling ARbiter).
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240613210036.1125203-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 861cd9b9cb62 ("net/mlx5: Verify support for scheduling element and TSAR type")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 452ef7f86036392005940de54228d42ca0044192 ]
Add the missing masks for supported element types and Transmit
Scheduling Arbiter (TSAR) types in scheduling elements.
Also, add the corresponding bit masks for these types in the QoS
capabilities of a NIC scheduler.
Fixes: 214baf22870c ("net/mlx5e: Support HTB offload")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6513eb3d3191574b58859ef2d6dc26c0277c6f81 upstream.
The referenced commit drops bad input, but has false positives.
Tighten the check to avoid these.
The check detects illegal checksum offload requests, which produce
csum_start/csum_off beyond end of packet after segmentation.
But it is based on two incorrect assumptions:
1. virtio_net_hdr_to_skb with VIRTIO_NET_HDR_GSO_TCP[46] implies GSO.
True in callers that inject into the tx path, such as tap.
But false in callers that inject into rx, like virtio-net.
Here, the flags indicate GRO, and CHECKSUM_UNNECESSARY or
CHECKSUM_NONE without VIRTIO_NET_HDR_F_NEEDS_CSUM is normal.
2. TSO requires checksum offload, i.e., ip_summed == CHECKSUM_PARTIAL.
False, as tcp[46]_gso_segment will fix up csum_start and offset for
all other ip_summed by calling __tcp_v4_send_check.
Because of 2, we can limit the scope of the fix to virtio_net_hdr
that do try to set these fields, with a bogus value.
Link: https://lore.kernel.org/netdev/20240909094527.GA3048202@port70.net/
Fixes: 89add40066f9 ("net: drop bad gso csum_start and offset in virtio_net_hdr")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240910213553.839926-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1a5caec7f80ca2e659c03f45378ee26915f4eda2 ]
When adding devm_regulator_bulk_get_const() I missed adding a stub for
when CONFIG_REGULATOR is not enabled. Under certain conditions (like
randconfig testing) this can cause the compiler to reports errors
like:
error: implicit declaration of function 'devm_regulator_bulk_get_const';
did you mean 'devm_regulator_bulk_get_enable'?
Add the stub.
Fixes: 1de452a0edda ("regulator: core: Allow drivers to define their init data as const")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408301813.TesFuSbh-lkp@intel.com/
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20240830073511.1.Ib733229a8a19fad8179213c05e1af01b51e42328@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 27b9ecc7a9ba1d0014779bfe5a6dbf630899c6e7 ]
It work exactly like regulator_bulk_get() but instead of working on a
provided list of names, it seek all consumers properties matching
xxx-supply.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Link: https://lore.kernel.org/r/20221115073603.3425396-2-clabbe@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 1a5caec7f80c ("regulator: core: Stub devm_regulator_bulk_get_const() if !CONFIG_REGULATOR")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ea72ce5da22806d5713f3ffb39a6d5ae73841f93 upstream.
iounmap() on x86 occasionally fails to unmap because the provided valid
ioremap address is not below high_memory. It turned out that this
happens due to KASLR.
KASLR uses the full address space between PAGE_OFFSET and vaddr_end to
randomize the starting points of the direct map, vmalloc and vmemmap
regions. It thereby limits the size of the direct map by using the
installed memory size plus an extra configurable margin for hot-plug
memory. This limitation is done to gain more randomization space
because otherwise only the holes between the direct map, vmalloc,
vmemmap and vaddr_end would be usable for randomizing.
The limited direct map size is not exposed to the rest of the kernel, so
the memory hot-plug and resource management related code paths still
operate under the assumption that the available address space can be
determined with MAX_PHYSMEM_BITS.
request_free_mem_region() allocates from (1 << MAX_PHYSMEM_BITS) - 1
downwards. That means the first allocation happens past the end of the
direct map and if unlucky this address is in the vmalloc space, which
causes high_memory to become greater than VMALLOC_START and consequently
causes iounmap() to fail for valid ioremap addresses.
MAX_PHYSMEM_BITS cannot be changed for that because the randomization
does not align with address bit boundaries and there are other places
which actually require to know the maximum number of address bits. All
remaining usage sites of MAX_PHYSMEM_BITS have been analyzed and found
to be correct.
Cure this by exposing the end of the direct map via PHYSMEM_END and use
that for the memory hot-plug and resource management related places
instead of relying on MAX_PHYSMEM_BITS. In the KASLR case PHYSMEM_END
maps to a variable which is initialized by the KASLR initialization and
otherwise it is based on MAX_PHYSMEM_BITS as before.
To prevent future hickups add a check into add_pages() to catch callers
trying to add memory above PHYSMEM_END.
Fixes: 0483e1fa6e09 ("x86/mm: Implement ASLR for kernel memory regions")
Reported-by: Max Ramanouski <max8rr8@gmail.com>
Reported-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-By: Max Ramanouski <max8rr8@gmail.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/87ed6soy3z.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 71833e79a42178d8a50b5081c98c78ace9325628 upstream.
Replace IS_ENABLED() with IS_REACHABLE() to substitute empty stubs for:
i2c_acpi_get_i2c_resource()
i2c_acpi_client_count()
i2c_acpi_find_bus_speed()
i2c_acpi_new_device_by_fwnode()
i2c_adapter *i2c_acpi_find_adapter_by_handle()
i2c_acpi_waive_d0_probe()
commit f17c06c6608a ("i2c: Fix conditional for substituting empty ACPI
functions") partially fixed this conditional to depend on CONFIG_I2C,
but used IS_ENABLED(), which is wrong since CONFIG_I2C is tristate.
CONFIG_ACPI is boolean but let's also change it to use IS_REACHABLE()
to future-proof it against becoming tristate.
Somehow despite testing various combinations of CONFIG_I2C and CONFIG_ACPI
we missed the combination CONFIG_I2C=m, CONFIG_ACPI=y.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f17c06c6608a ("i2c: Fix conditional for substituting empty ACPI functions")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408141333.gYnaitcV-lkp@intel.com/
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 172e422ffea20a89bfdc672741c1aad6fbb5044e ]
In some setups directories can have many (usually negative) dentries.
Hence __fsnotify_update_child_dentry_flags() function can take a
significant amount of time. Since the bulk of this function happens
under inode->i_lock this causes a significant contention on the lock
when we remove the watch from the directory as the
__fsnotify_update_child_dentry_flags() call from fsnotify_recalc_mask()
races with __fsnotify_update_child_dentry_flags() calls from
__fsnotify_parent() happening on children. This can lead upto softlockup
reports reported by users.
Fix the problem by calling fsnotify_update_children_dentry_flags() to
set PARENT_WATCHED flags only when parent starts watching children.
When parent stops watching children, clear false positive PARENT_WATCHED
flags lazily in __fsnotify_parent() for each accessed child.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7c327d56597d8de1680cf24e956b704270d3d84a ]
When a remoteproc crashes or goes down unexpectedly this can result in
a state where locks held by the remoteproc will remain locked possibly
resulting in deadlock. This new API hwspin_lock_bust() allows
hwspinlock implementers to define a bust operation for freeing previously
acquired hwspinlocks after verifying ownership of the acquired lock.
Signed-off-by: Richard Maina <quic_rmaina@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20240529-hwspinlock-bust-v3-1-c8b924ffa5a2@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f17c06c6608ad4ecd2ccf321753fb511812d821b ]
Add IS_ENABLED(CONFIG_I2C) to the conditional around a bunch of ACPI
functions.
The conditional around these functions depended only on CONFIG_ACPI.
But the functions are implemented in I2C core, so are only present if
CONFIG_I2C is enabled.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
handling
[ Upstream commit 34af4554fb0ce164e2c4876683619eb1e23848d4 ]
To avoid issues with out of order cleanup, or ambiguity about when the
auto freed data is first instantiated, do it within the for loop definition.
The disadvantage is that the struct device_node *child variable creation
is not immediately obvious where this is used.
However, in many cases, if there is another definition of
struct device_node *child; the compiler / static analysers will notify us
that it is unused, or uninitialized.
Note that, in the vast majority of cases, the _available_ form should be
used and as code is converted to these scoped handers, we should confirm
that any cases that do not check for available have a good reason not
to.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240225142714.286440-3-jic23@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Stable-dep-of: afc954fd223d ("thermal: of: Fix OF node leak in thermal_of_trips_init() error path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9448e55d032d99af8e23487f51a542d51b2f1a48 upstream.
The recent addition of scope based cleanup support to the kernel
provides a convenient tool to reduce the chances of leaking reference
counts where of_node_put() should have been called in an error path.
This enables
struct device_node *child __free(device_node) = NULL;
for_each_child_of_node(np, child) {
if (test)
return test;
}
with no need for a manual call of of_node_put().
A following patch will reduce the scope of the child variable to the
for loop, to avoid an issues with ordering of autocleanup, and make it
obvious when this assigned a non NULL value.
In this simple example the gains are small but there are some very
complex error handling cases buried in these loops that will be
greatly simplified by enabling early returns with out the need
for this manual of_node_put() call.
Note that there are coccinelle checks in
scripts/coccinelle/iterators/for_each_child.cocci to detect a failure
to call of_node_put(). This new approach does not cause false positives.
Longer term we may want to add scripting to check this new approach is
done correctly with no double of_node_put() calls being introduced due
to the auto cleanup. It may also be useful to script finding places
this new approach is useful.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240225142714.286440-2-jic23@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1382e3b6a3500c245e5278c66d210c02926f804f upstream.
The commit fc8b2a619469
("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation")
adds check of potential number of UDP segments vs
UDP_MAX_SEGMENTS in linux/virtio_net.h.
After this change certification test of USO guest-to-guest
transmit on Windows driver for virtio-net device fails,
for example with packet size of ~64K and mss of 536 bytes.
In general the USO should not be more restrictive than TSO.
Indeed, in case of unreasonably small mss a lot of segments
can cause queue overflow and packet loss on the destination.
Limit of 128 segments is good for any practical purpose,
with minimal meaningful mss of 536 the maximal UDP packet will
be divided to ~120 segments.
The number of segments for UDP packets is validated vs
UDP_MAX_SEGMENTS also in udp.c (v4,v6), this does not affect
quest-to-guest path but does affect packets sent to host, for
example.
It is important to mention that UDP_MAX_SEGMENTS is kernel-only
define and not available to user mode socket applications.
In order to request MSS smaller than MTU the applications
just uses setsockopt with SOL_UDP and UDP_SEGMENT and there is
no limitations on socket API level.
Fixes: fc8b2a619469 ("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation")
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 89add40066f9ed9abe5f7f886fe5789ff7e0c50e upstream.
Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb
for GSO packets.
The function already checks that a checksum requested with
VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets
this might not hold for segs after segmentation.
Syzkaller demonstrated to reach this warning in skb_checksum_help
offset = skb_checksum_start_offset(skb);
ret = -EINVAL;
if (WARN_ON_ONCE(offset >= skb_headlen(skb)))
By injecting a TSO packet:
WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0
ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774
ip_finish_output_gso net/ipv4/ip_output.c:279 [inline]
__ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301
iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4850 [inline]
netdev_start_xmit include/linux/netdevice.h:4864 [inline]
xmit_one net/core/dev.c:3595 [inline]
dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611
__dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261
packet_snd net/packet/af_packet.c:3073 [inline]
The geometry of the bad input packet at tcp_gso_segment:
[ 52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0
[ 52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244
[ 52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0))
[ 52.003050][ T8403] csum(0x60000c7 start=199 offset=1536
ip_summed=3 complete_sw=0 valid=0 level=0)
Mitigate with stricter input validation.
csum_offset: for GSO packets, deduce the correct value from gso_type.
This is already done for USO. Extend it to TSO. Let UFO be:
udp[46]_ufo_fragment ignores these fields and always computes the
checksum in software.
csum_start: finding the real offset requires parsing to the transport
header. Do not add a parser, use existing segmentation parsing. Thanks
to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded.
Again test both TSO and USO. Do not test UFO for the above reason, and
do not test UDP tunnel offload.
GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be
CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit
from devices with no checksum offload"), but then still these fields
are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no
need to test for ip_summed == CHECKSUM_PARTIAL first.
This revises an existing fix mentioned in the Fixes tag, which broke
small packets with GSO offload, as detected by kselftests.
Link: https://syzkaller.appspot.com/bug?extid=e1db31216c789f552871
Link: https://lore.kernel.org/netdev/20240723223109.2196886-1-kuba@kernel.org
Fixes: e269d79c7d35 ("net: missing check virtio")
Cc: stable@vger.kernel.org
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240729201108.1615114-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fc8b2a619469378717e7270d2a4e1ef93c585f7a upstream.
Syzbot reported two new paths to hit an internal WARNING using the
new virtio gso type VIRTIO_NET_HDR_GSO_UDP_L4.
RIP: 0010:skb_checksum_help+0x4a2/0x600 net/core/dev.c:3260
skb len=64521 gso_size=344
and
RIP: 0010:skb_warn_bad_offload+0x118/0x240 net/core/dev.c:3262
Older virtio types have historically had loose restrictions, leading
to many entirely impractical fuzzer generated packets causing
problems deep in the kernel stack. Ideally, we would have had strict
validation for all types from the start.
New virtio types can have tighter validation. Limit UDP GSO packets
inserted via virtio to the same limits imposed by the UDP_SEGMENT
socket interface:
1. must use checksum offload
2. checksum offload matches UDP header
3. no more segments than UDP_MAX_SEGMENTS
4. UDP GSO does not take modifier flags, notably SKB_GSO_TCP_ECN
Fixes: 860b7f27b8f7 ("linux/virtio_net.h: Support USO offload in vnet header.")
Reported-by: syzbot+01cdbc31e9c0ae9b33ac@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/0000000000005039270605eb0b7f@google.com/
Reported-by: syzbot+c99d835ff081ca30f986@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/0000000000005426680605eb0b9f@google.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 18e4cf915543257eae2925671934937163f5639b ]
Previously a thread could exit asynchronously (due to a signal) so some
care was needed to hold nfsd_mutex over the last svc_put() call. Now a
thread can only exit when svc_set_num_threads() is called, and this is
always called under nfsd_mutex. So no care is needed.
Not only is the mutex held when a thread exits now, but the svc refcount
is elevated, so the svc_put() in svc_exit_thread() will never be a final
put, so the mutex isn't even needed at this point in the code.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
