| Age | Commit message (Collapse) | Author |
|---|
|
commit f04aad36a07cc17b7a5d5b9a2d386ce6fae63e93 upstream.
syzkaller discovered the following crash: (kernel BUG)
[ 44.607039] ------------[ cut here ]------------
[ 44.607422] kernel BUG at mm/userfaultfd.c:2067!
[ 44.608148] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 44.608814] CPU: 1 UID: 0 PID: 2475 Comm: reproducer Not tainted 6.16.0-rc6 #1 PREEMPT(none)
[ 44.609635] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 44.610695] RIP: 0010:userfaultfd_release_all+0x3a8/0x460
<snip other registers, drop unreliable trace>
[ 44.617726] Call Trace:
[ 44.617926] <TASK>
[ 44.619284] userfaultfd_release+0xef/0x1b0
[ 44.620976] __fput+0x3f9/0xb60
[ 44.621240] fput_close_sync+0x110/0x210
[ 44.622222] __x64_sys_close+0x8f/0x120
[ 44.622530] do_syscall_64+0x5b/0x2f0
[ 44.622840] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 44.623244] RIP: 0033:0x7f365bb3f227
Kernel panics because it detects UFFD inconsistency during
userfaultfd_release_all(). Specifically, a VMA which has a valid pointer
to vma->vm_userfaultfd_ctx, but no UFFD flags in vma->vm_flags.
The inconsistency is caused in ksm_madvise(): when user calls madvise()
with MADV_UNMEARGEABLE on a VMA that is registered for UFFD in MINOR mode,
it accidentally clears all flags stored in the upper 32 bits of
vma->vm_flags.
Assuming x86_64 kernel build, unsigned long is 64-bit and unsigned int and
int are 32-bit wide. This setup causes the following mishap during the &=
~VM_MERGEABLE assignment.
VM_MERGEABLE is a 32-bit constant of type unsigned int, 0x8000'0000.
After ~ is applied, it becomes 0x7fff'ffff unsigned int, which is then
promoted to unsigned long before the & operation. This promotion fills
upper 32 bits with leading 0s, as we're doing unsigned conversion (and
even for a signed conversion, this wouldn't help as the leading bit is 0).
& operation thus ends up AND-ing vm_flags with 0x0000'0000'7fff'ffff
instead of intended 0xffff'ffff'7fff'ffff and hence accidentally clears
the upper 32-bits of its value.
Fix it by changing `VM_MERGEABLE` constant to unsigned long, using the
BIT() macro.
Note: other VM_* flags are not affected: This only happens to the
VM_MERGEABLE flag, as the other VM_* flags are all constants of type int
and after ~ operation, they end up with leading 1 and are thus converted
to unsigned long with leading 1s.
Note 2:
After commit 31defc3b01d9 ("userfaultfd: remove (VM_)BUG_ON()s"), this is
no longer a kernel BUG, but a WARNING at the same place:
[ 45.595973] WARNING: CPU: 1 PID: 2474 at mm/userfaultfd.c:2067
but the root-cause (flag-drop) remains the same.
[akpm@linux-foundation.org: rust bindgen wasn't able to handle BIT(), from Miguel]
Link: https://lore.kernel.org/oe-kbuild-all/202510030449.VfSaAjvd-lkp@intel.com/
Link: https://lkml.kernel.org/r/20251001090353.57523-2-acsjakub@amazon.de
Fixes: 7677f7fd8be7 ("userfaultfd: add minor fault registration mode")
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: SeongJae Park <sj@kernel.org>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Xu Xin <xu.xin16@zte.com.cn>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 25ba2b84c38f624151a3ba36e56d41c39b9223ad ]
Add nfsd_file_dio_alignment and use it to avoid issuing misaligned IO
using O_DIRECT. Any misaligned DIO falls back to using buffered IO.
Because misaligned DIO is now handled safely, remove the nfs modparam
'localio_O_DIRECT_semantics' that was added to require users opt-in to
the requirement that all O_DIRECT be properly DIO-aligned.
Also, introduce nfs_iov_iter_aligned_bvec() which is a variant of
iov_iter_aligned_bvec() that also verifies the offset associated with
an iov_iter is DIO-aligned. NOTE: in a parallel effort,
iov_iter_aligned_bvec() is being removed along with
iov_iter_is_aligned().
Lastly, add pr_info_ratelimited if underlying filesystem returns
-EINVAL because it was made to try O_DIRECT for IO that is not
DIO-aligned (shouldn't happen, so its best to be louder if it does).
Fixes: 3feec68563d ("nfs/localio: add direct IO enablement with sync and async IO support")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d091c6312561821f216ced63a7ad17c946b6d335 ]
The programming clock is enabled by AMBA bus driver before a dynamic
probe. As a result, a CoreSight driver may redundantly enable the same
clock.
To avoid this, add a check for device type and skip enabling the
programming clock for AMBA devices. The returned NULL pointer will be
tolerated by the drivers.
Fixes: 73d779a03a76 ("coresight: etm4x: Change etm4_platform_driver driver for MMIO devices")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-6-1dfe10bb3f6f@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1abc1b212effe920f4729353880c8e03f1d76b4b ]
Some CoreSight components have programming clocks (pclk) and are enabled
using clk_get() and clk_prepare_enable(). However, in many cases, these
clocks are not disabled when modules exit and only released by clk_put().
To fix the issue, this commit refactors programming clock by replacing
clk_get() and clk_prepare_enable() with devm_clk_get_optional_enabled()
for enabling APB clock. If the "apb_pclk" clock is not found, a NULL
pointer is returned, and the function proceeds to attempt enabling the
"apb" clock.
Since ACPI platforms rely on firmware to manage clocks, returning a NULL
pointer in this case leaves clock management to the firmware rather than
the driver. This effectively avoids a clock imbalance issue during
module removal - where the clock could be disabled twice: once during
the ACPI runtime suspend and again during the devm resource release.
Callers are updated to reuse the returned error value.
With the change, programming clocks are managed as resources in driver
model layer, allowing clock cleanup to be handled automatically. As a
result, manual cleanup operations are no longer needed and are removed
from the Coresight drivers.
Fixes: 73d779a03a76 ("coresight: etm4x: Change etm4_platform_driver driver for MMIO devices")
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-4-1dfe10bb3f6f@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 74e2ef72bd4b25ce21c8f309d4f5b91b5df9ff5b ]
Cypress(Infineon) is not the vendor for this 43752 SDIO WLAN chip, and so
has not officially released any firmware binary for it. It is incorrect to
maintain this WLAN chip with firmware vendor ID as "CYW". So relabel the
chip's firmware Vendor ID as "WCC" as suggested by the maintainer.
Fixes: d2587c57ffd8 ("brcmfmac: add 43752 SDIO ids and initialization")
Fixes: f74f1ec22dc2 ("wifi: brcmfmac: add support for Cypress firmware api")
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250724101136.6691-1-gokulkumar.sivakumar@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7ea95d55e63176899eb96f7aaa34a5646f501b2c ]
Commit 790fb9956eea ("linux/dmaengine.h: fix a few kernel-doc
warnings") inserted new documentation for @desc_free in the middle of
@tx_submit's description.
Put @tx_submit's description back together, matching the indentation
style of the rest of the documentation for dma_async_tx_descriptor.
Fixes: 790fb9956eea ("linux/dmaengine.h: fix a few kernel-doc warnings")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Nathan Lynch <nathan.lynch@amd.com>
Link: https://lore.kernel.org/r/20250826-dma_async_tx_desc-tx_submit-doc-fix-v1-1-18a4b51697db@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1abe21ef1adf0c5b6dbb5878c2fa4573df8d29fc ]
Introduce phy_id_compare_vendor() PHY ID helper to compare a PHY ID with
the PHY ID Vendor using the generic PHY ID Vendor mask.
While at it also rework the PHY_ID_MATCH macro and move the mask to
dedicated define so that PHY driver can make use of the mask if needed.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250823134431.4854-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: b4d5cd20507b ("net: phy: as21xxx: better handle PHY HW reset on soft-reboot")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cbdd16b818eef876dd2de9d503fe7397a0666cbe ]
Introduce a new HID quirk to indicate that this device has to be enabled
after the panel's backlight is enabled, and update the driver data for
the elan devices to enable this quirk. This cannot be a I2C HID quirk
because the kernel needs to acknowledge this before powering up the
device and read the VID/PID. When this quirk is enabled, register
.panel_enabled()/.panel_disabling() instead for the panel follower.
Also rename the *panel_prepare* functions into *panel_follower* because
they could be called in other situations now.
Fixes: bd3cba00dcc63 ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens")
Fixes: d06651bebf99e ("HID: i2c-hid: elan: Add elan-ekth6a12nay timing")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250818115015.2909525-2-treapking@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 68889dfd547bd8eabc5a98b58475d7b901cf5129 ]
When sk_alloc() allocates a socket, mem_cgroup_sk_alloc() sets
sk->sk_memcg based on the current task.
MPTCP subflow socket creation is triggered from userspace or
an in-kernel worker.
In the latter case, sk->sk_memcg is not what we want. So, we fix
it up from the parent socket's sk->sk_memcg in mptcp_attach_cgroup().
Although the code is placed under #ifdef CONFIG_MEMCG, it is buried
under #ifdef CONFIG_SOCK_CGROUP_DATA.
The two configs are orthogonal. If CONFIG_MEMCG is enabled without
CONFIG_SOCK_CGROUP_DATA, the subflow's memory usage is not charged
correctly.
Let's move the code out of the wrong ifdef guard.
Note that sk->sk_memcg is freed in sk_prot_free() and the parent
sk holds the refcnt of memcg->css here, so we don't need to use
css_tryget().
Fixes: 3764b0c5651e3 ("mptcp: attach subflow socket to parent cgroup")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://patch.msgid.link/20250815201712.1745332-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4540aed51b12bc13364149bf95f6ecef013197c0 ]
Yinhao et al. recently reported:
Our fuzzer tool discovered an uninitialized pointer issue in the
bpf_prog_test_run_xdp() function within the Linux kernel's BPF subsystem.
This leads to a NULL pointer dereference when a BPF program attempts to
deference the txq member of struct xdp_buff object.
The test initializes two programs of BPF_PROG_TYPE_XDP: progA acts as the
entry point for bpf_prog_test_run_xdp() and its expected_attach_type can
neither be of be BPF_XDP_DEVMAP nor BPF_XDP_CPUMAP. progA calls into a slot
of a tailcall map it owns. progB's expected_attach_type must be BPF_XDP_DEVMAP
to pass xdp_is_valid_access() validation. The program returns struct xdp_md's
egress_ifindex, and the latter is only allowed to be accessed under mentioned
expected_attach_type. progB is then inserted into the tailcall which progA
calls.
The underlying issue goes beyond XDP though. Another example are programs
of type BPF_PROG_TYPE_CGROUP_SOCK_ADDR. sock_addr_is_valid_access() as well
as sock_addr_func_proto() have different logic depending on the programs'
expected_attach_type. Similarly, a program attached to BPF_CGROUP_INET4_GETPEERNAME
should not be allowed doing a tailcall into a program which calls bpf_bind()
out of BPF which is only enabled for BPF_CGROUP_INET4_CONNECT.
In short, specifying expected_attach_type allows to open up additional
functionality or restrictions beyond what the basic bpf_prog_type enables.
The use of tailcalls must not violate these constraints. Fix it by enforcing
expected_attach_type in __bpf_prog_map_compatible().
Note that we only enforce this for tailcall maps, but not for BPF devmaps or
cpumaps: There, the programs are invoked through dev_map_bpf_prog_run*() and
cpu_map_bpf_prog_run*() which set up a new environment / context and therefore
these situations are not prone to this issue.
Fixes: 5e43f899b03a ("bpf: Check attach type at prog load time")
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250926171201.188490-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit edcc8a38b5ac1a3dbd05e113a38a25b937ebefe5 ]
The commit c2c60ea37e5b ("once: use __section(".data.once")") moved
DO_ONCE's ___done variable to .data.once section, which conflicts with
DO_ONCE_LITE() that also uses the same section.
This creates a race condition when clear_warn_once is used:
Thread 1 (DO_ONCE) Thread 2 (DO_ONCE)
__do_once_start
read ___done (false)
acquire once_lock
execute func
__do_once_done
write ___done (true) __do_once_start
release once_lock // Thread 3 clear_warn_once reset ___done
read ___done (false)
acquire once_lock
execute func
schedule once_work __do_once_done
once_deferred: OK write ___done (true)
static_branch_disable release once_lock
schedule once_work
once_deferred:
BUG_ON(!static_key_enabled)
DO_ONCE_LITE() in once_lite.h is used by WARN_ON_ONCE() and other warning
macros. Keep its ___done flag in the .data..once section and allow resetting
by clear_warn_once, as originally intended.
In contrast, DO_ONCE() is used for functions like get_random_once() and
relies on its ___done flag for internal synchronization. We should not reset
DO_ONCE() by clear_warn_once.
Fix it by isolating DO_ONCE's ___done into a separate .data..do_once section,
shielding it from clear_warn_once.
Fixes: c2c60ea37e5b ("once: use __section(".data.once")")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qi Xi <xiqi2@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d4680a11e14c7baf683cb8453d91d71d2e0b9d3e ]
Some distributions (e.g., CachyOS) support building the kernel with -O3,
but doing so may break kfuncs, resulting in their symbols not being
properly exported.
In fact, with gcc -O3, some kfuncs may be optimized away despite being
annotated as noinline. This happens because gcc can still clone the
function during IPA optimizations, e.g., by duplicating or inlining it
into callers, and then dropping the standalone symbol. This breaks BTF
ID resolution since resolve_btfids relies on the presence of a global
symbol for each kfunc.
Currently, this is not an issue for upstream, because we don't allow
building the kernel with -O3, but it may be safer to address it anyway,
to prevent potential issues in the future if compilers become more
aggressive with optimizations.
Therefore, add __noclone to __bpf_kfunc to ensure kfuncs are never
cloned and remain distinct, globally visible symbols, regardless of
the optimization level.
Fixes: 57e7c169cd6af ("bpf: Add __bpf_kfunc tag for marking kernel functions as kfuncs")
Acked-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Link: https://lore.kernel.org/r/20250924081426.156934-1-arighi@nvidia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef1e734dbe257ce8bc42383b9977b5558f061288 ]
Using regfields allows to cleanup masks and register offset definition,
allowing to access register info by it's functional name.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Stable-dep-of: 12a1185a06e3 ("power: supply: max77705_charger: rework interrupts")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e37b5596a19be9a150cb194ec32e78f295a3574b ]
No functional changes are intended, some drivers like mdraid will split
bio by internal processing, prepare to unify bio split codes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: b2f5974079d8 ("block: fix ordering of recursive split IO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1733e88874838ddebf7774440c285700865e6b08 ]
Now that bio->bi_issue is only used by blk-iolatency to get bio issue
time, replace bio_issue with u64 time directly and remove bio_issue to
make code cleaner.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 1f963bdd6420 ("block: initialize bio issue time in blk_mq_submit_bio()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 54f45a30c0d0153d2be091ba2d683ab6db6d1d5b ]
As the RISC-V PLIC cannot apply affinity settings without invoking
irq_enable(), it will make the interrupt unavailble when used as an
underlying interrupt chip for the MSI controller.
Implement the irq_startup() and irq_shutdown() callbacks for the PCI MSI
and MSI-X templates.
For chips that specify MSI_FLAG_PCI_MSI_STARTUP_PARENT, the parent startup
and shutdown functions are invoked. That allows the interrupt on the parent
chip to be enabled if the interrupt has not been enabled during
allocation. This is necessary for MSI controllers which use PLIC as
underlying parent interrupt chip.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/all/20250813232835.43458-3-inochiama@gmail.com
Stable-dep-of: 9d8c41816bac ("irqchip/sg2042-msi: Fix broken affinity setting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7a721a2fee2bce01af26699a87739db8ca8ea3c8 ]
As the MSI controller on SG2044 uses PLIC as the underlying interrupt
controller, it needs to call irq_enable() and irq_disable() to
startup/shutdown interrupts. Otherwise, the MSI interrupt can not be
startup correctly and will not respond any incoming interrupt.
Introduce irq_chip_startup_parent() and irq_chip_shutdown_parent() to allow
the interrupt controller to call the irq_startup()/irq_shutdown() callbacks
of the parent interrupt chip.
In case the irq_startup()/irq_shutdown() callbacks are not implemented for
the parent interrupt chip, this will fallback to irq_chip_enable_parent()
or irq_chip_disable_parent().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/all/20250813232835.43458-2-inochiama@gmail.com
Link: https://lore.kernel.org/lkml/20250722224513.22125-1-inochiama@gmail.com/
Stable-dep-of: 9d8c41816bac ("irqchip/sg2042-msi: Fix broken affinity setting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c93c59baa5ab57e94b874000cec56e26611b7a23 ]
Yonghong noticed that error messages for potential verifier bugs often
have a '(1)' at the end. This is happening because verifier_bug_if(cond,
env, fmt, args...) prints "(" #cond ")\n" as part of the message and
verifier_bug() is defined as:
#define verifier_bug(env, fmt, args...) verifier_bug_if(1, env, fmt, ##args)
Hence, verifier_bug() always ends up displaying '(1)'. This small patch
fixes it by having verifier_bug_if conditionally call verifier_bug
instead of the other way around.
Fixes: 1cb0f56d9618 ("bpf: WARN_ONCE on verifier bugs")
Reported-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/aJo9THBrzo8jFXsh@mail.gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 661f951e371cc134ea31c84238dbdc9a898b8403 ]
Leon [1] and Vinicius [2] noted a topology_span_sane() warning during
their testing starting from v6.16-rc1. Debug that followed pointed to
the tl->mask() for the NODE domain being incorrectly resolved to that of
the highest NUMA domain.
tl->mask() for NODE is set to the sd_numa_mask() which depends on the
global "sched_domains_curr_level" hack. "sched_domains_curr_level" is
set to the "tl->numa_level" during tl traversal in build_sched_domains()
calling sd_init() but was not reset before topology_span_sane().
Since "tl->numa_level" still reflected the old value from
build_sched_domains(), topology_span_sane() for the NODE domain trips
when the span of the last NUMA domain overlaps.
Instead of replicating the "sched_domains_curr_level" hack, get rid of
it entirely and instead, pass the entire "sched_domain_topology_level"
object to tl->cpumask() function to prevent such mishap in the future.
sd_numa_mask() now directly references "tl->numa_level" instead of
relying on the global "sched_domains_curr_level" hack to index into
sched_domains_numa_masks[].
The original warning was reproducible on the following NUMA topology
reported by Leon:
$ sudo numactl -H
available: 5 nodes (0-4)
node 0 cpus: 0 1
node 0 size: 2927 MB
node 0 free: 1603 MB
node 1 cpus: 2 3
node 1 size: 3023 MB
node 1 free: 3008 MB
node 2 cpus: 4 5
node 2 size: 3023 MB
node 2 free: 3007 MB
node 3 cpus: 6 7
node 3 size: 3023 MB
node 3 free: 3002 MB
node 4 cpus: 8 9
node 4 size: 3022 MB
node 4 free: 2718 MB
node distances:
node 0 1 2 3 4
0: 10 39 38 37 36
1: 39 10 38 37 36
2: 38 38 10 37 36
3: 37 37 37 10 36
4: 36 36 36 36 10
The above topology can be mimicked using the following QEMU cmd that was
used to reproduce the warning and test the fix:
sudo qemu-system-x86_64 -enable-kvm -cpu host \
-m 20G -smp cpus=10,sockets=10 -machine q35 \
-object memory-backend-ram,size=4G,id=m0 \
-object memory-backend-ram,size=4G,id=m1 \
-object memory-backend-ram,size=4G,id=m2 \
-object memory-backend-ram,size=4G,id=m3 \
-object memory-backend-ram,size=4G,id=m4 \
-numa node,cpus=0-1,memdev=m0,nodeid=0 \
-numa node,cpus=2-3,memdev=m1,nodeid=1 \
-numa node,cpus=4-5,memdev=m2,nodeid=2 \
-numa node,cpus=6-7,memdev=m3,nodeid=3 \
-numa node,cpus=8-9,memdev=m4,nodeid=4 \
-numa dist,src=0,dst=1,val=39 \
-numa dist,src=0,dst=2,val=38 \
-numa dist,src=0,dst=3,val=37 \
-numa dist,src=0,dst=4,val=36 \
-numa dist,src=1,dst=0,val=39 \
-numa dist,src=1,dst=2,val=38 \
-numa dist,src=1,dst=3,val=37 \
-numa dist,src=1,dst=4,val=36 \
-numa dist,src=2,dst=0,val=38 \
-numa dist,src=2,dst=1,val=38 \
-numa dist,src=2,dst=3,val=37 \
-numa dist,src=2,dst=4,val=36 \
-numa dist,src=3,dst=0,val=37 \
-numa dist,src=3,dst=1,val=37 \
-numa dist,src=3,dst=2,val=37 \
-numa dist,src=3,dst=4,val=36 \
-numa dist,src=4,dst=0,val=36 \
-numa dist,src=4,dst=1,val=36 \
-numa dist,src=4,dst=2,val=36 \
-numa dist,src=4,dst=3,val=36 \
...
[ prateek: Moved common functions to include/linux/sched/topology.h,
reuse the common bits for s390 and ppc, commit message ]
Closes: https://lore.kernel.org/lkml/20250610110701.GA256154@unreal/ [1]
Fixes: ccf74128d66c ("sched/topology: Assert non-NUMA topology masks don't (partially) overlap") # ce29a7da84cd, f55dac1dafb3
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Valentin Schneider <vschneid@redhat.com> # x86
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> # powerpc
Link: https://lore.kernel.org/lkml/a3de98387abad28592e6ab591f3ff6107fe01dc1.1755893468.git.tim.c.chen@linux.intel.com/ [2]
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c2ce2453413d429e302659abc5ace634e873f6f5 upstream.
Devices with power.no_pm set are not expected to need any power
management at all, so modify device_set_pm_not_required() to set
power.no_callbacks for them too in case runtime PM will be enabled
for any of them (which in principle may be done for convenience if
such a device participates in a dependency chain).
Since device_set_pm_not_required() must be called before device_add()
or it would not have any effect, it can update power.no_callbacks
without locking, unlike pm_runtime_no_callbacks() that can be called
after registering the target device.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/1950054.tdWV9SEqCh@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"7 hotfixes. 4 are cc:stable and the remainder address post-6.16 issues
or aren't considered necessary for -stable kernels. 6 of these fixes
are for MM.
All singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-09-27-22-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
include/linux/pgtable.h: convert arch_enter_lazy_mmu_mode() and friends to static inlines
mm/damon/sysfs: do not ignore callback's return value in damon_sysfs_damon_call()
mailmap: add entry for Bence Csókás
fs/proc/task_mmu: check p->vec_buf for NULL
kmsan: fix out-of-bounds access to shadow memory
mm/hugetlb: fix copy_hugetlb_page_range() to use ->pt_share_count
mm/hugetlb: fix folio is still mapped when deleted
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix two dl_server regressions: a race that can end up leaving the
dl_server stuck, and a dl_server throttling bug causing lag to fair
tasks"
* tag 'sched-urgent-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix dl_server behaviour
sched/deadline: Fix dl_server getting stuck
|
|
static inlines
commit c519c3c0a113 ("mm/kasan: avoid lazy MMU mode hazards") introduced
the use of arch_enter_lazy_mmu_mode(), which results in the compiler
complaining about "statement has no effect", when
__HAVE_ARCH_LAZY_MMU_MODE is not defined in include/linux/pgtable.h
The exact warning/error is:
In file included from ./include/linux/kasan.h:37,
from mm/kasan/shadow.c:14:
mm/kasan/shadow.c: In function kasan_populate_vmalloc_pte:
./include/linux/pgtable.h:247:41: error: statement with no effect [-Werror=unused-value]
247 | #define arch_enter_lazy_mmu_mode() (LAZY_MMU_DEFAULT)
| ^
mm/kasan/shadow.c:322:9: note: in expansion of macro arch_enter_lazy_mmu_mode> 322 | arch_enter_lazy_mmu_mode();
| ^~~~~~~~~~~~~~~~~~~~~~~~
switching these "functions" to static inlines fixes this up.
Fixes: c519c3c0a113 ("mm/kasan: avoid lazy MMU mode hazards")
Reported-by: Balbir Singh <balbirs@nvidia.com>
Closes: https://lkml.kernel.org/r/20250912235515.367061-1-balbirs@nvidia.com
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit 59d9094df3d79 ("mm: hugetlb: independent PMD page table shared
count") introduced ->pt_share_count dedicated to hugetlb PMD share count
tracking, but omitted fixing copy_hugetlb_page_range(), leaving the
function relying on page_count() for tracking that no longer works.
When lazy page table copy for hugetlb is disabled, that is, revert commit
bcd51a3c679d ("hugetlb: lazy page table copies in fork()") fork()'ing with
hugetlb PMD sharing quickly lockup -
[ 239.446559] watchdog: BUG: soft lockup - CPU#75 stuck for 27s!
[ 239.446611] RIP: 0010:native_queued_spin_lock_slowpath+0x7e/0x2e0
[ 239.446631] Call Trace:
[ 239.446633] <TASK>
[ 239.446636] _raw_spin_lock+0x3f/0x60
[ 239.446639] copy_hugetlb_page_range+0x258/0xb50
[ 239.446645] copy_page_range+0x22b/0x2c0
[ 239.446651] dup_mmap+0x3e2/0x770
[ 239.446654] dup_mm.constprop.0+0x5e/0x230
[ 239.446657] copy_process+0xd17/0x1760
[ 239.446660] kernel_clone+0xc0/0x3e0
[ 239.446661] __do_sys_clone+0x65/0xa0
[ 239.446664] do_syscall_64+0x82/0x930
[ 239.446668] ? count_memcg_events+0xd2/0x190
[ 239.446671] ? syscall_trace_enter+0x14e/0x1f0
[ 239.446676] ? syscall_exit_work+0x118/0x150
[ 239.446677] ? arch_exit_to_user_mode_prepare.constprop.0+0x9/0xb0
[ 239.446681] ? clear_bhb_loop+0x30/0x80
[ 239.446684] ? clear_bhb_loop+0x30/0x80
[ 239.446686] entry_SYSCALL_64_after_hwframe+0x76/0x7e
There are two options to resolve the potential latent issue:
1. warn against PMD sharing in copy_hugetlb_page_range(),
2. fix it.
This patch opts for the second option.
While at it, simplify the comment, the details are not actually relevant
anymore.
Link: https://lkml.kernel.org/r/20250916004520.1604530-1-jane.chu@oracle.com
Fixes: 59d9094df3d7 ("mm: hugetlb: independent PMD page table shared count")
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth, IPsec and CAN.
No known regressions at this point.
Current release - regressions:
- xfrm: xfrm_alloc_spi shouldn't use 0 as SPI
Previous releases - regressions:
- xfrm: fix offloading of cross-family tunnels
- bluetooth: fix several races leading to UaFs
- dsa: lantiq_gswip: fix FDB entries creation for the CPU port
- eth:
- tun: update napi->skb after XDP process
- mlx: fix UAF in flow counter release
Previous releases - always broken:
- core: forbid FDB status change while nexthop is in a group
- smc: fix warning in smc_rx_splice() when calling get_page()
- can: provide missing ndo_change_mtu(), to prevent buffer overflow.
- eth:
- i40e: fix VF config validation
- broadcom: fix support for PTP_EXTTS_REQUEST2 ioctl"
* tag 'net-6.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
octeontx2-pf: Fix potential use after free in otx2_tc_add_flow()
net: dsa: lantiq_gswip: suppress -EINVAL errors for bridge FDB entries added to the CPU port
net: dsa: lantiq_gswip: move gswip_add_single_port_br() call to port_setup()
libie: fix string names for AQ error codes
net/mlx5e: Fix missing FEC RS stats for RS_544_514_INTERLEAVED_QUAD
net/mlx5: HWS, ignore flow level for multi-dest table
net/mlx5: fs, fix UAF in flow counter release
selftests: fib_nexthops: Add test cases for FDB status change
selftests: fib_nexthops: Fix creation of non-FDB nexthops
nexthop: Forbid FDB status change while nexthop is in a group
net: allow alloc_skb_with_frags() to use MAX_SKB_FRAGS
bnxt_en: correct offset handling for IPv6 destination address
ptp: document behavior of PTP_STRICT_FLAGS
broadcom: fix support for PTP_EXTTS_REQUEST2 ioctl
broadcom: fix support for PTP_PEROUT_DUTY_CYCLE
Bluetooth: MGMT: Fix possible UAFs
Bluetooth: hci_event: Fix UAF in hci_acl_create_conn_sync
Bluetooth: hci_event: Fix UAF in hci_conn_tx_dequeue
Bluetooth: hci_sync: Fix hci_resume_advertising_sync
Bluetooth: Fix build after header cleanup
...
|
|
Pull virtio fixes from Michael Tsirkin:
"virtio,vhost: last minute fixes
More small fixes. Most notably this fixes crashes and hangs in
vhost-net"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
MAINTAINERS, mailmap: Update address for Peter Hilber
virtio_config: clarify output parameters
uapi: vduse: fix typo in comment
vhost: Take a reference on the task in struct vhost_task.
vhost-net: flush batched before enabling notifications
Revert "vhost/net: Defer TX queue re-enable until after sendmsg"
vhost-net: unbreak busy polling
vhost-scsi: fix argument order in tport allocation error message
|
|
John reported undesirable behaviour with the dl_server since commit:
cccb45d7c4295 ("sched/deadline: Less agressive dl_server handling").
When starving fair tasks on purpose (starting spinning FIFO tasks),
his fair workload, which often goes (briefly) idle, would delay fair
invocations for a second, running one invocation per second was both
unexpected and terribly slow.
The reason this happens is that when dl_se->server_pick_task() returns
NULL, indicating no runnable tasks, it would yield, pushing any later
jobs out a whole period (1 second).
Instead simply stop the server. This should restore behaviour in that
a later wakeup (which restarts the server) will be able to continue
running (subject to the CBS wakeup rules).
Notably, this does not re-introduce the behaviour cccb45d7c4295 set
out to solve, any start/stop cycle is naturally throttled by the timer
period (no active cancel).
Fixes: cccb45d7c4295 ("sched/deadline: Less agressive dl_server handling")
Reported-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: John Stultz <jstultz@google.com>
|
|
John found it was easy to hit lockup warnings when running locktorture
on a 2 CPU VM, which he bisected down to: commit cccb45d7c429
("sched/deadline: Less agressive dl_server handling").
While debugging it seems there is a chance where we end up with the
dl_server dequeued, with dl_se->dl_server_active. This causes
dl_server_start() to return without enqueueing the dl_server, thus it
fails to run when RT tasks starve the cpu.
When this happens, dl_server_timer() catches the
'!dl_se->server_has_tasks(dl_se)' case, which then calls
replenish_dl_entity() and dl_server_stopped() and finally return
HRTIMER_NO_RESTART.
This ends in no new timer and also no enqueue, leaving the dl_server
'dead', allowing starvation.
What should have happened is for the bandwidth timer to start the
zero-laxity timer, which in turn would enqueue the dl_server and cause
dl_se->server_pick_task() to be called -- which will stop the
dl_server if no fair tasks are observed for a whole period.
IOW, it is totally irrelevant if there are fair tasks at the moment of
bandwidth refresh.
This removes all dl_se->server_has_tasks() users, so remove the whole
thing.
Fixes: cccb45d7c4295 ("sched/deadline: Less agressive dl_server handling")
Reported-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: John Stultz <jstultz@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are a few minor code fixes for tegra firmware, i.MX firmware
and the eyeq reset controller, and a MAINTAINERS update as Alyssa
Rosenzweig moves on to non-kernel projects.
The other changes are all for devicetree files:
- Multiple Marvell Armada SoCs need changes to fix PCIe, audio and
SATA
- A socfpga board fails to probe the ethernet phy
- The two temperature sensors on i.MX8MP are swapped
- Allwinner devicetree files cause build-time warnings
- Two Rockchip based boards need corrections for headphone detection
and SPI flash"
* tag 'soc-fixes-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: remove Alyssa Rosenzweig
firmware: tegra: Do not warn on missing memory-region property
arm64: dts: marvell: cn9132-clearfog: fix multi-lane pci x2 and x4 ports
arm64: dts: marvell: cn9132-clearfog: disable eMMC high-speed modes
arm64: dts: marvell: cn913x-solidrun: fix sata ports status
ARM: dts: kirkwood: Fix sound DAI cells for OpenRD clients
arm64: dts: imx8mp: Correct thermal sensor index
ARM: imx: Kconfig: Adjust select after renamed config option
firmware: imx: Add stub functions for SCMI CPU API
firmware: imx: Add stub functions for SCMI LMM API
firmware: imx: Add stub functions for SCMI MISC API
riscv: dts: allwinner: rename devterm i2c-gpio node to comply with binding
arm64: dts: rockchip: Fix the headphone detection on the orangepi 5
arm64: dts: rockchip: Add vcc supply for SPI Flash on NanoPC-T6
ARM: dts: socfpga: sodia: Fix mdio bus probe and PHY address
reset: eyeq: fix OF node leak
ARM64: dts: mcbin: fix SATA ports on Macchiatobin
ARM: dts: armada-370-db: Fix stereo audio input routing on Armada 370
ARM: dts: allwinner: Minor whitespace cleanup
|
|
Fix a kernel trace [1] caused by releasing an HWS action of a local flow
counter in mlx5_cmd_hws_delete_fte(), where the HWS action refcount and
mutex were not initialized and the counter struct could already be freed
when deleting the rule.
Fix it by adding the missing initializations and adding refcount for the
local flow counter struct.
[1] Kernel log:
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x48
mlx5_fs_put_hws_action.part.0.cold+0x21/0x94 [mlx5_core]
mlx5_fc_put_hws_action+0x96/0xad [mlx5_core]
mlx5_fs_destroy_fs_actions+0x8b/0x152 [mlx5_core]
mlx5_cmd_hws_delete_fte+0x5a/0xa0 [mlx5_core]
del_hw_fte+0x1ce/0x260 [mlx5_core]
mlx5_del_flow_rules+0x12d/0x240 [mlx5_core]
? ttwu_queue_wakelist+0xf4/0x110
mlx5_ib_destroy_flow+0x103/0x1b0 [mlx5_ib]
uverbs_free_flow+0x20/0x50 [ib_uverbs]
destroy_hw_idr_uobject+0x1b/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x34/0x1a0 [ib_uverbs]
uobj_destroy+0x3c/0x80 [ib_uverbs]
ib_uverbs_run_method+0x23e/0x360 [ib_uverbs]
? uverbs_finalize_object+0x60/0x60 [ib_uverbs]
ib_uverbs_cmd_verbs+0x14f/0x2c0 [ib_uverbs]
? do_tty_write+0x1a9/0x270
? file_tty_write.constprop.0+0x98/0xc0
? new_sync_write+0xfc/0x190
ib_uverbs_ioctl+0xd7/0x160 [ib_uverbs]
__x64_sys_ioctl+0x87/0xc0
do_syscall_64+0x59/0x90
Fixes: b581f4266928 ("net/mlx5: fs, manage flow counters HWS action sharing by refcount")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1758525094-816583-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This was ambiguous enough for a broken patch (206cc44588f7 ("virtio:
reject shm region if length is zero")) to make it into the kernel, so
make it clearer.
Link: https://lore.kernel.org/r/20250816071600-mutt-send-email-mst@kernel.org/
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Message-Id: <20250829150944.233505-1-hi@alyssa.is>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Pull io_uring fixes from Jens Axboe:
- Fix for a regression introduced in the io-wq worker creation logic.
- Remove the allocation cache for the msg_ring io_kiocb allocations. I
have a suspicion that there's a bug there, and since we just fixed
one in that area, let's just yank the use of that cache entirely.
It's not that important, and it kills some code.
- Treat a closed ring like task exiting in that any requests that
trigger post that condition should just get canceled. Doesn't fix any
real issues, outside of having tasks being able to rely on that
guarantee.
- Fix for a bug in the network zero-copy notification mechanism, where
a comparison for matching tctx/ctx for notifications was buggy in
that it didn't correctly compare with the previous notification.
* tag 'io_uring-6.17-20250919' of git://git.kernel.dk/linux:
io_uring: fix incorrect io_kiocb reference in io_link_skb
io_uring/msg_ring: kill alloc_cache for io_kiocb allocations
io_uring: include dying ring in task_work "should cancel" state
io_uring/io-wq: fix `max_workers` breakage and `nr_workers` underflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"pmdomain core:
- Restore behaviour for disabling unused PM domains and introduce the
GENPD_FLAG_NO_STAY_ON configuration bit
pmdomain providers:
- renesas: Don't keep unused PM domains powered-on
- rockchip: Fix regulator dependency with GENPD_FLAG_NO_STAY_ON"
* tag 'pmdomain-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: renesas: rmobile-sysc: Don't keep unused PM domains powered-on
pmdomain: renesas: rcar-gen4-sysc: Don't keep unused PM domains powered-on
pmdomain: renesas: rcar-sysc: Don't keep unused PM domains powered-on
pmdomain: rockchip: Fix regulator dependency with GENPD_FLAG_NO_STAY_ON
pmdomain: core: Restore behaviour for disabling unused PM domains
pmdomain: renesas: rcar-sysc: Make rcar_sysc_onecell_np __initdata
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier fixes from Steven Rostedt:
- Fix build in some RISC-V flavours
Some system calls only are available for the 64bit RISC-V machines.
#ifdef out the cases of clock_nanosleep and futex in the sleep
monitor if they are not supported by the architecture.
- Fix wrong cast, obsolete after refactoring
Use container_of() to get to the rv_monitor structure from the
enable_monitors_next() 'p' pointer. The assignment worked only
because the list field used happened to be the first field of the
structure.
- Remove redundant include files
Some include files were listed twice. Remove the extra ones and sort
the includes.
- Fix missing unlock on failure
There was an error path that exited the rv_register_monitor()
function without releasing a lock. Change that to goto the lock
release.
- Add Gabriele Monaco to be Runtime Verifier maintainer
Gabriele is doing most of the work on RV as well as collecting
patches. Add him to the maintainers file for Runtime Verification.
* tag 'trace-rv-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Add Gabriele Monaco as maintainer for Runtime Verification
rv: Fix missing mutex unlock in rv_register_monitor()
include/linux/rv.h: remove redundant include file
rv: Fix wrong type cast in enabled_monitors_next()
rv: Support systems with time64-only syscalls
|
|
A recent commit:
fc582cd26e88 ("io_uring/msg_ring: ensure io_kiocb freeing is deferred for RCU")
fixed an issue with not deferring freeing of io_kiocb structs that
msg_ring allocates to after the current RCU grace period. But this only
covers requests that don't end up in the allocation cache. If a request
goes into the alloc cache, it can get reused before it is sane to do so.
A recent syzbot report would seem to indicate that there's something
there, however it may very well just be because of the KASAN poisoning
that the alloc_cache handles manually.
Rather than attempt to make the alloc_cache sane for that use case, just
drop the usage of the alloc_cache for msg_ring request payload data.
Fixes: 50cf5f3842af ("io_uring/msg_ring: add an alloc cache for io_kiocb entries")
Link: https://lore.kernel.org/io-uring/68cc2687.050a0220.139b6.0005.GAE@google.com/
Reported-by: syzbot+baa2e0f4e02df602583e@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless. No known regressions at this point.
Current release - fix to a fix:
- eth: Revert "net/mlx5e: Update and set Xon/Xoff upon port speed set"
- wifi: iwlwifi: pcie: fix byte count table for 7000/8000 devices
- net: clear sk->sk_ino in sk_set_socket(sk, NULL), fix CRIU
Previous releases - regressions:
- bonding: set random address only when slaves already exist
- rxrpc: fix untrusted unsigned subtract
- eth:
- ice: fix Rx page leak on multi-buffer frames
- mlx5: don't return mlx5_link_info table when speed is unknown
Previous releases - always broken:
- tls: make sure to abort the stream if headers are bogus
- tcp: fix null-deref when using TCP-AO with TCP_REPAIR
- dpll: fix skipping last entry in clock quality level reporting
- eth: qed: don't collect too many protection override GRC elements,
fix memory corruption"
* tag 'net-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
octeontx2-pf: Fix use-after-free bugs in otx2_sync_tstamp()
cnic: Fix use-after-free bugs in cnic_delete_task
devlink rate: Remove unnecessary 'static' from a couple places
MAINTAINERS: update sundance entry
net: liquidio: fix overflow in octeon_init_instr_queue()
net: clear sk->sk_ino in sk_set_socket(sk, NULL)
Revert "net/mlx5e: Update and set Xon/Xoff upon port speed set"
selftests: tls: test skb copy under mem pressure and OOB
tls: make sure to abort the stream if headers are bogus
selftest: packetdrill: Add tcp_fastopen_server_reset-after-disconnect.pkt.
tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect().
octeon_ep: fix VF MAC address lifecycle handling
selftests: bonding: add vlan over bond testing
bonding: don't set oif to bond dev when getting NS target destination
net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer
net/mlx5e: Add a miss level for ipsec crypto offload
net/mlx5e: Harden uplink netdev access against device unbind
MAINTAINERS: make the DPLL entry cover drivers
doc/netlink: Fix typos in operation attributes
igc: don't fail igc_probe() on LED setup error
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"15 hotfixes. 11 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 13 of these
fixes are for MM.
The usual shower of singletons, plus
- fixes from Hugh to address various misbehaviors in get_user_pages()
- patches from SeongJae to address a quite severe issue in DAMON
- another series also from SeongJae which completes some fixes for a
DAMON startup issue"
* tag 'mm-hotfixes-stable-2025-09-17-21-10' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
zram: fix slot write race condition
nilfs2: fix CFI failure when accessing /sys/fs/nilfs2/features/*
samples/damon/mtier: avoid starting DAMON before initialization
samples/damon/prcl: avoid starting DAMON before initialization
samples/damon/wsse: avoid starting DAMON before initialization
MAINTAINERS: add Lance Yang as a THP reviewer
MAINTAINERS: add Jann Horn as rmap reviewer
mm/damon/sysfs: use dynamically allocated repeat mode damon_call_control
mm/damon/core: introduce damon_call_control->dealloc_on_cancel
mm: folio_may_be_lru_cached() unless folio_test_large()
mm: revert "mm: vmscan.c: fix OOM on swap stress test"
mm: revert "mm/gup: clear the LRU flag of a page before adding to LRU batch"
mm/gup: local lru_add_drain() to avoid lru_add_drain_all()
mm/gup: check ref_count instead of lru before migration
|
|
The function mlx5_uplink_netdev_get() gets the uplink netdevice
pointer from mdev->mlx5e_res.uplink_netdev. However, the netdevice can
be removed and its pointer cleared when unbound from the mlx5_core.eth
driver. This results in a NULL pointer, causing a kernel panic.
BUG: unable to handle page fault for address: 0000000000001300
at RIP: 0010:mlx5e_vport_rep_load+0x22a/0x270 [mlx5_core]
Call Trace:
<TASK>
mlx5_esw_offloads_rep_load+0x68/0xe0 [mlx5_core]
esw_offloads_enable+0x593/0x910 [mlx5_core]
mlx5_eswitch_enable_locked+0x341/0x420 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0x17e/0x3a0 [mlx5_core]
devlink_nl_eswitch_set_doit+0x60/0xd0
genl_family_rcv_msg_doit+0xe0/0x130
genl_rcv_msg+0x183/0x290
netlink_rcv_skb+0x4b/0xf0
genl_rcv+0x24/0x40
netlink_unicast+0x255/0x380
netlink_sendmsg+0x1f3/0x420
__sock_sendmsg+0x38/0x60
__sys_sendto+0x119/0x180
do_syscall_64+0x53/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Ensure the pointer is valid before use by checking it for NULL. If it
is valid, immediately call netdev_hold() to take a reference, and
preventing the netdevice from being freed while it is in use.
Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1757939074-617281-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove redundant include <linux/types.h> to clean up the code.
Move all unique include files inside CONFIG_RV as they are only needed
when CONFIG_RV is enabled. Arrange include files alphabetically.
Fixes: 24cbfe18d55a ("rv: Merge struct rv_monitor_def into struct rv_monitor") [1]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202507312017.oyD08TL5-lkp@intel.com/
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/aJneRbHGlNFg7lr9@bhairav-test.ee.iitb.ac.in
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Patch series "mm/damon/sysfs: fix refresh_ms control overwriting on
multi-kdamonds usages".
Automatic esssential DAMON/DAMOS status update feature of DAMON sysfs
interface (refresh_ms) is broken [1] for multiple DAMON contexts
(kdamonds) use case, since it uses a global single damon_call_control
object for all created DAMON contexts. The fields of the object,
particularly the list field is over-written for the contexts and it makes
unexpected results including user-space hangup and kernel crashes [2].
Fix it by extending damon_call_control for the use case and updating the
usage on DAMON sysfs interface to use per-context dynamically allocated
damon_call_control object.
This patch (of 2):
When damon_call_control->repeat is set, damon_call() is executed
asynchronously, and is eventually canceled when kdamond finishes. If the
damon_call_control object is dynamically allocated, finding the place to
deallocate the object is difficult. Introduce a new damon_call_control
field, namely dealloc_on_cancel, to ask the kdamond deallocates those
dynamically allocated objects when those are canceled.
Link: https://lkml.kernel.org/r/20250908201513.60802-3-sj@kernel.org
Link: https://lkml.kernel.org/r/20250908201513.60802-2-sj@kernel.org
Fixes: d809a7c64ba8 ("mm/damon/sysfs: implement refresh_ms file internal work")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Yunjeong Mun <yunjeong.mun@sk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mm/swap.c and mm/mlock.c agree to drain any per-CPU batch as soon as a
large folio is added: so collect_longterm_unpinnable_folios() just wastes
effort when calling lru_add_drain[_all]() on a large folio.
But although there is good reason not to batch up PMD-sized folios, we
might well benefit from batching a small number of low-order mTHPs (though
unclear how that "small number" limitation will be implemented).
So ask if folio_may_be_lru_cached() rather than !folio_test_large(), to
insulate those particular checks from future change. Name preferred to
"folio_is_batchable" because large folios can well be put on a batch: it's
just the per-CPU LRU caches, drained much later, which need care.
Marked for stable, to counter the increase in lru_add_drain_all()s from
"mm/gup: check ref_count instead of lru before migration".
Link: https://lkml.kernel.org/r/57d2eaf8-3607-f318-e0c5-be02dce61ad0@google.com
Fixes: 9a4e9f3b2d73 ("mm: update get_user_pages_longterm to migrate pages allocated from CMA region")
Signed-off-by: Hugh Dickins <hughd@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Keir Fraser <keirf@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Li Zhe <lizhe.67@bytedance.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shivank Garg <shivankg@amd.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Xu <weixugc@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: yangge <yangge1116@126.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.17, round 2:
- Fix mach-imx Kconfig to select the correct PIT timer option
(Lukas Bulwahn)
- Correct thermal sensor index for i.MX8MP device tree (Peng Fan)
- Fix i.MX SCMI build error by adding stub API functions (Peng Fan)
* tag 'imx-fixes-6.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp: Correct thermal sensor index
ARM: imx: Kconfig: Adjust select after renamed config option
firmware: imx: Add stub functions for SCMI CPU API
firmware: imx: Add stub functions for SCMI LMM API
firmware: imx: Add stub functions for SCMI MISC API
Link: https://lore.kernel.org/r/aMQs2zr4fYl2DYVr@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN, netfilter and wireless.
We have an IPv6 routing regression with the relevant fix still a WiP.
This includes a last-minute revert to avoid more problems.
Current release - new code bugs:
- wifi: nl80211: completely disable per-link stats for now
Previous releases - regressions:
- dev_ioctl: take ops lock in hwtstamp lower paths
- netfilter:
- fix spurious set lookup failures
- fix lockdep splat due to missing annotation
- genetlink: fix genl_bind() invoking bind() after -EPERM
- phy: transfer phy_config_inband() locking responsibility to phylink
- can: xilinx_can: fix use-after-free of transmitted SKB
- hsr: fix lock warnings
- eth:
- igb: fix NULL pointer dereference in ethtool loopback test
- i40e: fix Jumbo Frame support after iPXE boot
- macsec: sync features on RTM_NEWLINK
Previous releases - always broken:
- tunnels: reset the GSO metadata before reusing the skb
- mptcp: make sync_socket_options propagate SOCK_KEEPOPEN
- can: j1939: implement NETDEV_UNREGISTER notification hanidler
- wifi: ath12k: fix WMI TLV header misalignment"
* tag 'net-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
Revert "net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups"
hsr: hold rcu and dev lock for hsr_get_port_ndev
hsr: use hsr_for_each_port_rtnl in hsr_port_get_hsr
hsr: use rtnl lock when iterating over ports
wifi: nl80211: completely disable per-link stats for now
net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups
net: ethtool: fix wrong type used in struct kernel_ethtool_ts_info
MAINTAINERS: add Phil as netfilter reviewer
netfilter: nf_tables: restart set lookup on base_seq change
netfilter: nf_tables: make nft_set_do_lookup available unconditionally
netfilter: nf_tables: place base_seq in struct net
netfilter: nft_set_rbtree: continue traversal if element is inactive
netfilter: nft_set_pipapo: don't check genbit from packetpath lookups
netfilter: nft_set_bitmap: fix lockdep splat due to missing annotation
can: rcar_can: rcar_can_resume(): fix s2ram with PSCI
can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB
can: j1939: j1939_local_ecu_get(): undo increment when j1939_local_ecu_get() fails
can: j1939: j1939_sk_bind(): call j1939_priv_put() immediately when j1939_local_ecu_get() failed
can: j1939: implement NETDEV_UNREGISTER notification handler
selftests: can: enable CONFIG_CAN_VCAN as a module
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a nasty hibernation regression introduced during the 6.16
cycle, an issue related to energy model management occurring on Intel
hybrid systems where some CPUs are offline to start with, and two
regressions in the amd-pstate driver:
- Restore a pm_restrict_gfp_mask() call in hibernation_snapshot()
that was removed incorrectly during the 6.16 development cycle
(Rafael Wysocki)
- Introduce a function for registering a perf domain without
triggering a system-wide CPU capacity update and make the
intel_pstate driver use it to avoid reocurring unsuccessful
attempts to update capacities of all CPUs in the system (Rafael
Wysocki)
- Fix setting of CPPC.min_perf in the active mode with performance
governor in the amd-pstate driver to restore its expected behavior
changed recently (Gautham Shenoy)
- Avoid mistakenly setting EPP to 0 in the amd-pstate driver after
system resume as a result of recent code changes (Mario
Limonciello)"
* tag 'pm-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Restrict GFP mask in hibernation_snapshot()
PM: EM: Add function for registering a PD without capacity update
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after resume
cpufreq/amd-pstate: Fix setting of CPPC.min_perf in active mode for performance governor
|
|
Recent changes to genpd prevents those PM domains being powered-on during
initialization from being powered-off during the boot sequence. Based upon
whether CONFIG_PM_CONFIG_PM_GENERIC_DOMAINS_OF is set of not, genpd relies
on the sync_state mechanism or the genpd_power_off_unused() (which is a
late_initcall_sync), to understand when it's okay to allow these PM domains
to be powered-off.
This new behaviour in genpd has lead to problems on different platforms.
Let's therefore restore the behavior of genpd_power_off_unused().
Moreover, let's introduce GENPD_FLAG_NO_STAY_ON, to allow genpd OF
providers to opt-out from the new behaviour.
Link: https://lore.kernel.org/all/20250701114733.636510-1-ulf.hansson@linaro.org/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/all/20250902-rk3576-lockup-regression-v1-1-c4a0c9daeb00@collabora.com/
Reported-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Fixes: 0e789b491ba0 ("pmdomain: core: Leave powered-on genpds on until sync_state")
Fixes: 13a4b7fb6260 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 15 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 14 of these
fixes are for MM.
This includes
- kexec fixes from Breno for a recently introduced
use-uninitialized bug
- DAMON fixes from Quanmin Yan to avoid div-by-zero crashes
which can occur if the operator uses poorly-chosen insmod
parameters
and misc singleton fixes"
* tag 'mm-hotfixes-stable-2025-09-10-20-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add tree entry to numa memblocks and emulation block
mm/damon/sysfs: fix use-after-free in state_show()
proc: fix type confusion in pde_set_flags()
compiler-clang.h: define __SANITIZE_*__ macros only when undefined
mm/vmalloc, mm/kasan: respect gfp mask in kasan_populate_vmalloc()
ocfs2: fix recursive semaphore deadlock in fiemap call
mm/memory-failure: fix VM_BUG_ON_PAGE(PagePoisoned(page)) when unpoison memory
mm/mremap: fix regression in vrm->new_addr check
percpu: fix race on alloc failed warning limit
mm/memory-failure: fix redundant updates for already poisoned pages
s390: kexec: initialize kexec_buf struct
riscv: kexec: initialize kexec_buf struct
arm64: kexec: initialize kexec_buf struct in load_other_segments()
mm/damon/reclaim: avoid divide-by-zero in damon_reclaim_apply_parameters()
mm/damon/lru_sort: avoid divide-by-zero in damon_lru_sort_apply_parameters()
mm/damon/core: set quota->charged_from to jiffies at first charge window
mm/hugetlb: add missing hugetlb_lock in __unmap_hugepage_range()
init/main.c: fix boot time tracing crash
mm/memory_hotplug: fix hwpoisoned large folio handling in do_migrate_range()
mm/khugepaged: fix the address passed to notifier on testing young
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vmescape mitigation fixes from Dave Hansen:
"Mitigate vmscape issue with indirect branch predictor flushes.
vmscape is a vulnerability that essentially takes Spectre-v2 and
attacks host userspace from a guest. It particularly affects
hypervisors like QEMU.
Even if a hypervisor may not have any sensitive data like disk
encryption keys, guest-userspace may be able to attack the
guest-kernel using the hypervisor as a confused deputy.
There are many ways to mitigate vmscape using the existing Spectre-v2
defenses like IBRS variants or the IBPB flushes. This series focuses
solely on IBPB because it works universally across vendors and all
vulnerable processors. Further work doing vendor and model-specific
optimizations can build on top of this if needed / wanted.
Do the normal issue mitigation dance:
- Add the CPU bug boilerplate
- Add a list of vulnerable CPUs
- Use IBPB to flush the branch predictors after running guests"
* tag 'vmscape-for-linus-20250904' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmscape: Add old Intel CPUs to affected list
x86/vmscape: Warn when STIBP is disabled with SMT
x86/bugs: Move cpu_bugs_smt_update() down
x86/vmscape: Enable the mitigation
x86/vmscape: Add conditional IBPB mitigation
x86/vmscape: Enumerate VMSCAPE bug
Documentation/hw-vuln: Add VMSCAPE documentation
|
|
To ensure successful builds when CONFIG_IMX_SCMI_CPU_DRV is not enabled,
this patch adds static inline stub implementations for the following
functions:
- scmi_imx_cpu_start()
- scmi_imx_cpu_started()
- scmi_imx_cpu_reset_vector_set()
These stubs return -EOPNOTSUPP to indicate that the functionality is not
supported in the current configuration. This avoids potential build or
link errors in code that conditionally calls these functions based on
feature availability.
Fixes: 1055faa5d660 ("firmware: imx: Add i.MX95 SCMI CPU driver")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
To ensure successful builds when CONFIG_IMX_SCMI_LMM_DRV is not enabled,
this patch adds static inline stub implementations for the following
functions:
- scmi_imx_lmm_operation()
- scmi_imx_lmm_info()
- scmi_imx_lmm_reset_vector_set()
These stubs return -EOPNOTSUPP to indicate that the functionality is not
supported in the current configuration. This avoids potential build or
link errors in code that conditionally calls these functions based on
feature availability.
Fixes: 7242bbf418f0 ("firmware: imx: Add i.MX95 SCMI LMM driver")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
To ensure successful builds when CONFIG_IMX_SCMI_MISC_DRV is not enabled,
this patch adds static inline stub implementations for the following
functions:
- scmi_imx_misc_ctrl_get()
- scmi_imx_misc_ctrl_set()
These stubs return -EOPNOTSUPP to indicate that the functionality is not
supported in the current configuration. This avoids potential build or
link errors in code that conditionally calls these functions based on
feature availability.
This patch also drops the changes in commit 540c830212ed ("firmware: imx:
remove duplicate scmi_imx_misc_ctrl_get()").
The original change aimed to simplify the handling of optional features by
removing conditional stubs. However, the use of conditional stubs is
necessary when CONFIG_IMX_SCMI_MISC_DRV is n, while consumer driver is
set to y.
This is not a matter of preserving legacy patterns, but rather to ensure
that there is no link error whether for module or built-in.
Fixes: 0b4f8a68b292 ("firmware: imx: Add i.MX95 MISC driver")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
