| Age | Commit message (Collapse) | Author |
|---|
|
Constify the passed struct fixed_phy_status *status where possible.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/d1764b62-8538-408b-a4e3-b63715481a38@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All callers pass PHY_POLL, therefore remove irq argument from
fixed_phy_register().
Note: I keep the irq argument in fixed_phy_add_gpiod() for now,
for the case that somebody may want to use a GPIO interrupt in
the future, by e.g. adding a call to fwnode_irq_get() to
fixed_phy_get_gpiod().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/31cdb232-a5e9-4997-a285-cb9a7d208124@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All callers pass PHY_POLL, therefore remove irq argument from
fixed_phy_add().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://patch.msgid.link/b3b9b3bc-c310-4a54-b376-c909c83575de@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After having factored out the provider part from mdio_bus.c, we can
make the mdio consumer / device layer a separate module. This also
allows to remove Kconfig symbol MDIO_DEVICE.
The module init / exit functions from mdio_bus.c no longer have to be
called from phy_device.c. The link order defined in
drivers/net/phy/Makefile ensures that init / exit functions are called
in the right order.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/dba6b156-5748-44ce-b5e2-e8dc2fcee5a7@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Seems like the extack cookie hasn't found any users outside
of wireless, which always uses nl_set_extack_cookie_u64().
Thus, allocating 20 bytes for it is pointless, reduce that
to 8 bytes, and add a BUILD_BUG_ON() to ensure it's enough
(obviously it is, for a u64, but in case it changes again.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250516115927.38209-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since its introduction 6 yrs ago this functions has never had a user.
So remove it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/ccbeef28-65ae-4e28-b1db-816c44338dee@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the application can not drain fast enough a TCP socket queue,
tcp_rcv_space_adjust() can overestimate tp->rcvq_space.space.
Then sk->sk_rcvbuf can grow and hit tcp_rmem[2] for no good reason.
Fix this by taking into acount the number of available bytes.
Keeping sk->sk_rcvbuf at the right size allows better cache efficiency.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Link: https://patch.msgid.link/20250513193919.1089692-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc7).
Conflicts:
tools/testing/selftests/drivers/net/hw/ncdevmem.c
97c4e094a4b2 ("tests/ncdevmem: Fix double-free of queue array")
2f1a805f32ba ("selftests: ncdevmem: Implement devmem TCP TX")
https://lore.kernel.org/20250514122900.1e77d62d@canb.auug.org.au
Adjacent changes:
net/core/devmem.c
net/core/devmem.h
0afc44d8cdf6 ("net: devmem: fix kernel panic when netlink socket close after module unload")
bd61848900bf ("net: devmem: Implement TX path")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth and wireless.
A few more fixes for the locking changes trickling in. Nothing too
alarming, I suspect those will continue for another release. Other
than that things are slowing down nicely.
Current release - fix to a fix:
- Bluetooth: hci_event: use key encryption size when its known
- tools: ynl-gen: allow multi-attr without nested-attributes again
Current release - regressions:
- locking fixes:
- lock lower level devices when updating features
- eth: bnxt_en: bring back rtnl_lock() in the bnxt_open() path
- devmem: fix panic when Netlink socket closes after module unload
Current release - new code bugs:
- eth: txgbe: fixes for FW communication on new AML devices
Previous releases - always broken:
- sched: flush gso_skb list too during ->change(), avoid potential
null-deref on reconfig
- wifi: mt76: disable NAPI on driver removal
- hv_netvsc: fix error 'nvsp_rndis_pkt_complete error status: 2'"
* tag 'net-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
net: devmem: fix kernel panic when netlink socket close after module unload
tsnep: fix timestamping with a stacked DSA driver
net/tls: fix kernel panic when alloc_page failed
bnxt_en: bring back rtnl_lock() in the bnxt_open() path
mlxsw: spectrum_router: Fix use-after-free when deleting GRE net devices
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
octeontx2-pf: Do not reallocate all ntuple filters
wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
wifi: mt76: disable napi on driver removal
Drivers: hv: vmbus: Remove vmbus_sendpacket_pagebuffer()
hv_netvsc: Remove rmsg_pgcnt
hv_netvsc: Preserve contiguous PFN grouping in the page buffer array
hv_netvsc: Use vmbus_sendpacket_mpb_desc() to send VMBus messages
Drivers: hv: Allow vmbus_sendpacket_mpb_desc() to create multiple ranges
octeontx2-af: Fix CGX Receive counters
net: ethernet: mtk_eth_soc: fix typo for declaration MT7988 ESW capability
net: libwx: Fix FW mailbox unknown command
net: libwx: Fix FW mailbox reply timeout
net: txgbe: Fix to calculate EEPROM checksum for AML devices
octeontx2-pf: macsec: Fix incorrect max transmit size in TX secy
...
|
|
mirred_nest_level is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Move mirred_nest_level to struct netdev_xmit as u8, provide wrappers.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://patch.msgid.link/20250512092736.229935-11-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
system_page_pool is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Make a struct with a page_pool member (original system_page_pool) and a
local_lock_t and use local_lock_nested_bh() for locking. This change
adds only lockdep coverage and does not alter the functional behaviour
for !PREEMPT_RT.
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-6-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Update the for_each_netdev_in_bond_rcu macro to iterate through network
devices in the bond's network namespace instead of always using
init_net. This change is safe because:
1. **Bond-Slave Namespace Relationship**: A bond device and its slaves
must reside in the same network namespace. The bond device's
namespace is established at creation time and cannot change.
2. **Slave Movement Implications**: Any attempt to move a slave device
to a different namespace automatically removes it from the bond, as
per kernel networking stack rules.
This maintains the invariant that slaves must exist in the same
namespace as their bond.
This change is part of an effort to enable Link Aggregation (LAG) to
work properly inside custom network namespaces. Previously, the macro
would only find slave devices in the initial network namespace,
preventing proper bonding functionality in custom namespaces.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250513081922.525716-1-mbloch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With the netvsc driver changed to use vmbus_sendpacket_mpb_desc()
instead of vmbus_sendpacket_pagebuffer(), the latter has no remaining
callers. Remove it.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-6-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With some Infineon chips the timeouts in tpm_tis_send_data (both B and
C) can reach up to about 2250 ms.
Timeout C is retried since
commit de9e33df7762 ("tpm, tpm_tis: Workaround failed command reception on Infineon devices")
Timeout B still needs to be extended.
The problem is most commonly encountered with context related operation
such as load context/save context. These are issued directly by the
kernel, and there is no retry logic for them.
When a filesystem is set up to use the TPM for unlocking the boot fails,
and restarting the userspace service is ineffective. This is likely
because ignoring a load context/save context result puts the real TPM
state and the TPM state expected by the kernel out of sync.
Chips known to be affected:
tpm_tis IFX1522:00: 2.0 TPM (device-id 0x1D, rev-id 54)
Description: SLB9672
Firmware Revision: 15.22
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
Firmware Revision: 7.83
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
Firmware Revision: 5.63
Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm2_start_auth_session() does not mask TPM RC correctly from the callers:
[ 28.766528] tpm tpm0: A TPM error (2307) occurred start auth session
Process TPM RCs inside tpm2_start_auth_session(), and map them to POSIX
error codes.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 699e3efd6c64 ("tpm: Add HMAC session start and end functions")
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Closes: https://lore.kernel.org/linux-integrity/Z_NgdRHuTKP6JK--@gondor.apana.org.au/
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The functionality of mdiobus_register_board_info() typically isn't
optional for the caller. Therefore remove the stub.
Note: Currently we have only one caller of mdiobus_register_board_info(),
in a DSA/PHYLINK context. Therefore CONFIG_MDIO_DEVICE is selected anyway.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/410a2222-c4e8-45b0-9091-d49674caeb00@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drivers need to make sure not to pass netmem dma-addrs to the
dma-mapping API in order to support netmem TX.
Add helpers and netmem_dma_*() helpers that enables special handling of
netmem dma-addrs that drivers can use.
Document in netmem.rst what drivers need to do to support netmem TX.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-7-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Augment dmabuf binding to be able to handle TX. Additional to all the RX
binding, we also create tx_vec needed for the TX path.
Provide API for sendmsg to be able to send dmabufs bound to this device:
- Provide a new dmabuf_tx_cmsg which includes the dmabuf to send from.
- MSG_ZEROCOPY with SCM_DEVMEM_DMABUF cmsg indicates send from dma-buf.
Devmem is uncopyable, so piggyback off the existing MSG_ZEROCOPY
implementation, while disabling instances where MSG_ZEROCOPY falls back
to copying.
We additionally pipe the binding down to the new
zerocopy_fill_skb_from_devmem which fills a TX skb with net_iov netmems
instead of the traditional page netmems.
We also special case skb_frag_dma_map to return the dma-address of these
dmabuf net_iovs instead of attempting to map pages.
The TX path may release the dmabuf in a context where we cannot wait.
This happens when the user unbinds a TX dmabuf while there are still
references to its netmems in the TX path. In that case, the netmems will
be put_netmem'd from a context where we can't unmap the dmabuf, Resolve
this by making __net_devmem_dmabuf_binding_free schedule_work'd.
Based on work by Stanislav Fomichev <sdf@fomichev.me>. A lot of the meat
of the implementation came from devmem TCP RFC v1[1], which included the
TX path, but Stan did all the rebasing on top of netmem/net_iov.
Cc: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-5-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently net_iovs support only pp ref counts, and do not support a
page ref equivalent.
This is fine for the RX path as net_iovs are used exclusively with the
pp and only pp refcounting is needed there. The TX path however does not
use pp ref counts, thus, support for get_page/put_page equivalent is
needed for netmem.
Support get_netmem/put_netmem. Check the type of the netmem before
passing it to page or net_iov specific code to obtain a page ref
equivalent.
For dmabuf net_iovs, we obtain a ref on the underlying binding. This
ensures the entire binding doesn't disappear until all the net_iovs have
been put_netmem'ed. We do not need to track the refcount of individual
dmabuf net_iovs as we don't allocate/free them from a pool similar to
what the buddy allocator does for pages.
This code is written to be extensible by other net_iov implementers.
get_netmem/put_netmem will check the type of the netmem and route it to
the correct helper:
pages -> [get|put]_page()
dmabuf net_iovs -> net_devmem_[get|put]_net_iov()
new net_iovs -> new helpers
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-3-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The KSZ9477 PHY driver contained workarounds for broken EEE capability
advertisements by manually masking supported EEE modes and forcibly
disabling EEE if MICREL_NO_EEE was set.
With proper MAC-side EEE handling implemented via phylink, these quirks
are no longer necessary. Remove MICREL_NO_EEE handling and the use of
ksz9477_get_features().
This simplifies the PHY driver and avoids duplicated EEE management logic.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org # v6.14+
Link: https://patch.msgid.link/20250504081434.424489-3-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux
Tony Nguyen says:
====================
Prepare for Intel IPU E2000 (GEN3)
This is the first part in introducing RDMA support for idpf.
----------------------------------------------------------------
Tatyana Nikolova says:
To align with review comments, the patch series introducing RDMA
RoCEv2 support for the Intel Infrastructure Processing Unit (IPU)
E2000 line of products is going to be submitted in three parts:
1. Modify ice to use specific and common IIDC definitions and
pass a core device info to irdma.
2. Add RDMA support to idpf and modify idpf to use specific and
common IIDC definitions and pass a core device info to irdma.
3. Add RDMA RoCEv2 support for the E2000 products, referred to as
GEN3 to irdma.
This first part is a 5 patch series based on the original
"iidc/ice/irdma: Update IDC to support multiple consumers" patch
to allow for multiple CORE PCI drivers, using the auxbus.
Patches:
1) Move header file to new name for clarity and replace ice
specific DSCP define with a kernel equivalent one in irdma
2) Unify naming convention
3) Separate header file into common and driver specific info
4) Replace ice specific DSCP define with a kernel equivalent
one in ice
5) Implement core device info struct and update drivers to use it
----------------------------------------------------------------
v1: https://lore.kernel.org/20250505212037.2092288-1-anthony.l.nguyen@intel.com
IWL reviews:
[v5] https://lore.kernel.org/20250416021549.606-1-tatyana.e.nikolova@intel.com
[v4] https://lore.kernel.org/20250225050428.2166-1-tatyana.e.nikolova@intel.com
[v3] https://lore.kernel.org/20250207194931.1569-1-tatyana.e.nikolova@intel.com
[v2] https://lore.kernel.org/20240824031924.421-1-tatyana.e.nikolova@intel.com
[v1] https://lore.kernel.org/20240724233917.704-1-tatyana.e.nikolova@intel.com
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux:
iidc/ice/irdma: Update IDC to support multiple consumers
ice: Replace ice specific DSCP mapping num with a kernel define
iidc/ice/irdma: Break iidc.h into two headers
iidc/ice/irdma: Rename to iidc_* convention
iidc/ice/irdma: Rename IDC header file
====================
Link: https://patch.msgid.link/20250509200712.2911060-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 ITS mitigation from Dave Hansen:
"Mitigate Indirect Target Selection (ITS) issue.
I'd describe this one as a good old CPU bug where the behavior is
_obviously_ wrong, but since it just results in bad predictions it
wasn't wrong enough to notice. Well, the researchers noticed and also
realized that thus bug undermined a bunch of existing indirect branch
mitigations.
Thus the unusually wide impact on this one. Details:
ITS is a bug in some Intel CPUs that affects indirect branches
including RETs in the first half of a cacheline. Due to ITS such
branches may get wrongly predicted to a target of (direct or indirect)
branch that is located in the second half of a cacheline. Researchers
at VUSec found this behavior and reported to Intel.
Affected processors:
- Cascade Lake, Cooper Lake, Whiskey Lake V, Coffee Lake R, Comet
Lake, Ice Lake, Tiger Lake and Rocket Lake.
Scope of impact:
- Guest/host isolation:
When eIBRS is used for guest/host isolation, the indirect branches
in the VMM may still be predicted with targets corresponding to
direct branches in the guest.
- Intra-mode using cBPF:
cBPF can be used to poison the branch history to exploit ITS.
Realigning the indirect branches and RETs mitigates this attack
vector.
- User/kernel:
With eIBRS enabled user/kernel isolation is *not* impacted by ITS.
- Indirect Branch Prediction Barrier (IBPB):
Due to this bug indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB.
This will be fixed in the microcode.
Mitigation:
As indirect branches in the first half of cacheline are affected, the
mitigation is to replace those indirect branches with a call to thunk that
is aligned to the second half of the cacheline.
RETs that take prediction from RSB are not affected, but they may be
affected by RSB-underflow condition. So, RETs in the first half of
cacheline are also patched to a return thunk that executes the RET aligned
to second half of cacheline"
* tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftest/x86/bugs: Add selftests for ITS
x86/its: FineIBT-paranoid vs ITS
x86/its: Use dynamic thunks for indirect branches
x86/ibt: Keep IBT disabled during alternative patching
mm/execmem: Unify early execmem_cache behaviour
x86/its: Align RETs in BHB clear sequence to avoid thunking
x86/its: Add support for RSB stuffing mitigation
x86/its: Add "vmexit" option to skip mitigation on some CPUs
x86/its: Enable Indirect Target Selection mitigation
x86/its: Add support for ITS-safe return thunk
x86/its: Add support for ITS-safe indirect thunk
x86/its: Enumerate Indirect Target Selection (ITS) bug
Documentation: x86/bugs/its: Add ITS documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc timers fixes from Ingo Molnar:
- Fix time keeping bugs in CLOCK_MONOTONIC_COARSE clocks
- Work around absolute relocations into vDSO code that GCC erroneously
emits in certain arm64 build environments
- Fix a false positive lockdep warning in the i8253 clocksource driver
* tag 'timers-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/i8253: Use raw_spinlock_irqsave() in clockevent_i8253_disable()
arm64: vdso: Work around invalid absolute relocations from GCC
timekeeping: Prevent coarse clocks going backwards
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"22 hotfixes. 13 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
About half are for MM. Five OCFS2 fixes and a few MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: fix folio_pte_batch() on XEN PV
nilfs2: fix deadlock warnings caused by lock dependency in init_nilfs()
mm/hugetlb: copy the CMA flag when demoting
mm, swap: fix false warning for large allocation with !THP_SWAP
selftests/mm: fix a build failure on powerpc
selftests/mm: fix build break when compiling pkey_util.c
mm: vmalloc: support more granular vrealloc() sizing
tools/testing/selftests: fix guard region test tmpfs assumption
ocfs2: stop quota recovery before disabling quotas
ocfs2: implement handshaking with ocfs2 recovery thread
ocfs2: switch osb->disable_recovery to enum
mailmap: map Uwe's BayLibre addresses to a single one
MAINTAINERS: add mm THP section
mm/userfaultfd: fix uninitialized output field for -EAGAIN race
selftests/mm: compaction_test: support platform with huge mount of memory
MAINTAINERS: add core mm section
ocfs2: fix panic in failed foilio allocation
mm/huge_memory: fix dereferencing invalid pmd migration entry
MAINTAINERS: add reverse mapping section
x86: disable image size check for test builds
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a bunch of small driver fixes (mostly all IIO) for 6.15-rc6.
Included in here are:
- loads of tiny IIO driver fixes for reported issues
- hyperv driver fix for a much-reported and worked on sysfs ring
buffer creation bug
All of these have been in linux-next for over a week (the IIO ones for
many weeks now), with no reported issues"
* tag 'char-misc-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Drivers: hv: Make the sysfs node size for the ring buffer dynamic
uio_hv_generic: Fix sysfs creation path for ring buffer
iio: adis16201: Correct inclinometer channel resolution
iio: adc: ad7606: fix serial register access
iio: pressure: mprls0025pa: use aligned_s64 for timestamp
iio: imu: adis16550: align buffers for timestamp
staging: iio: adc: ad7816: Correct conditional logic for store mode
iio: adc: ad7266: Fix potential timestamp alignment issue.
iio: adc: ad7768-1: Fix insufficient alignment of timestamp.
iio: adc: dln2: Use aligned_s64 for timestamp
iio: accel: adxl355: Make timestamp 64-bit aligned using aligned_s64
iio: temp: maxim-thermocouple: Fix potential lack of DMA safe buffer.
iio: chemical: pms7003: use aligned_s64 for timestamp
iio: chemical: sps30: use aligned_s64 for timestamp
iio: imu: inv_mpu6050: align buffer for timestamp
iio: imu: st_lsm6dsx: Fix wakeup source leaks on device unbind
iio: adc: qcom-spmi-iadc: Fix wakeup source leaks on device unbind
iio: accel: fxls8962af: Fix wakeup source leaks on device unbind
iio: adc: ad7380: fix event threshold shift
iio: hid-sensor-prox: Fix incorrect OFFSET calculation
...
|
|
ITS mitigation moves the unsafe indirect branches to a safe thunk. This
could degrade the prediction accuracy as the source address of indirect
branches becomes same for different execution paths.
To improve the predictions, and hence the performance, assign a separate
thunk for each indirect callsite. This is also a defense-in-depth measure
to avoid indirect branches aliasing with each other.
As an example, 5000 dynamic thunks would utilize around 16 bits of the
address space, thereby gaining entropy. For a BTB that uses
32 bits for indexing, dynamic thunks could provide better prediction
accuracy over fixed thunks.
Have ITS thunks be variable sized and use EXECMEM_MODULE_TEXT such that
they are both more flexible (got to extend them later) and live in 2M TLBs,
just like kernel code, avoiding undue TLB pressure.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
Early kernel memory is RWX, only at the end of early boot (before SMP)
do we mark things ROX. Have execmem_cache mirror this behaviour for
early users.
This avoids having to remember what code is execmem and what is not --
we can poke everything with impunity ;-) Also performance for not
having to do endless text_poke_mm switches.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
Indirect Target Selection (ITS) is a bug in some pre-ADL Intel CPUs with
eIBRS. It affects prediction of indirect branch and RETs in the
lower half of cacheline. Due to ITS such branches may get wrongly predicted
to a target of (direct or indirect) branch that is located in the upper
half of the cacheline.
Scope of impact
===============
Guest/host isolation
--------------------
When eIBRS is used for guest/host isolation, the indirect branches in the
VMM may still be predicted with targets corresponding to branches in the
guest.
Intra-mode
----------
cBPF or other native gadgets can be used for intra-mode training and
disclosure using ITS.
User/kernel isolation
---------------------
When eIBRS is enabled user/kernel isolation is not impacted.
Indirect Branch Prediction Barrier (IBPB)
-----------------------------------------
After an IBPB, indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB. This is
mitigated by a microcode update.
Add cmdline parameter indirect_target_selection=off|on|force to control the
mitigation to relocate the affected branches to an ITS-safe thunk i.e.
located in the upper half of cacheline. Also add the sysfs reporting.
When retpoline mitigation is deployed, ITS safe-thunks are not needed,
because retpoline sequence is already ITS-safe. Similarly, when call depth
tracking (CDT) mitigation is deployed (retbleed=stuff), ITS safe return
thunk is not used, as CDT prevents RSB-underflow.
To not overcomplicate things, ITS mitigation is not supported with
spectre-v2 lfence;jmp mitigation. Moreover, it is less practical to deploy
lfence;jmp mitigation on ITS affected parts anyways.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
In preparation of supporting more than a single core PCI driver
for RDMA, move ice specific structs like qset_params, qos_info
and qos_params from iidc_rdma.h to iidc_rdma_ice.h.
Previously, the ice driver was just exporting its entire PF struct
to the auxiliary driver, but since each core driver will have its own
different PF struct, implement a universal struct that all core drivers
can provide to the auxiliary driver through the probe call.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Co-developed-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Co-developed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Co-developed-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Some NETC functionality is controlled using control messages sent to the
hardware using BD ring interface with 32B descriptor similar to transmit
BD ring used on ENETC. This BD ring interface is referred to as command
BD ring. It is used to configure functionality where the underlying
resources may be shared between different entities or being too large to
configure using direct registers. Therefore, a messaging protocol called
NETC Table Management Protocol (NTMP) is provided for exchanging
configuration and management information between the software and the
hardware using the command BD ring interface.
For the management protocol of LS1028A has been retroactively named NTMP
1.0, and its implementation is in enetc_cbdr.c and enetc_qos.c. However,
NTMP of i.MX95 has been upgraded to version 2.0, which is incompatible
with LS1028A, because the message formats have been changed. Therefore,
add the netc-lib driver to support NTMP 2.0 to operate various tables.
Note that, only MAC address filter table and RSS table are supported at
the moment. More tables will be supported in subsequent patches.
It is worth mentioning that the purpose of the netc-lib driver is to
provide some NTMP-based generic interfaces for ENETC and NETC Switch
drivers. Currently, it only supports the configurations of some tables.
Interfaces such as tc flower and debugfs will be added in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc6).
No conflicts.
Adjacent changes:
net/core/dev.c:
08e9f2d584c4 ("net: Lock netdevices during dev_shutdown")
a82dc19db136 ("net: avoid potential race between netdev_get_by_index_lock() and netns switch")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN, WiFi and netfilter.
We have still a comple of regressions open due to the recent
drivers locking refactor. The patches are in-flight, but not
ready yet.
Current release - regressions:
- core: lock netdevices during dev_shutdown
- sch_htb: make htb_deactivate() idempotent
- eth: virtio-net: don't re-enable refill work too early
Current release - new code bugs:
- eth: icssg-prueth: fix kernel panic during concurrent Tx queue
access
Previous releases - regressions:
- gre: fix again IPv6 link-local address generation.
- eth: b53: fix learning on VLAN unaware bridges
Previous releases - always broken:
- wifi: fix out-of-bounds access during multi-link element
defragmentation
- can:
- initialize spin lock on device probe
- fix order of unregistration calls
- openvswitch: fix unsafe attribute parsing in output_userspace()
- eth:
- virtio-net: fix total qstat values
- mtk_eth_soc: reset all TX queues on DMA free
- fbnic: firmware IPC mailbox fixes"
* tag 'net-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
virtio-net: fix total qstat values
net: export a helper for adding up queue stats
fbnic: Do not allow mailbox to toggle to ready outside fbnic_mbx_poll_tx_ready
fbnic: Pull fbnic_fw_xmit_cap_msg use out of interrupt context
fbnic: Improve responsiveness of fbnic_mbx_poll_tx_ready
fbnic: Cleanup handling of completions
fbnic: Actually flush_tx instead of stalling out
fbnic: Add additional handling of IRQs
fbnic: Gate AXI read/write enabling on FW mailbox
fbnic: Fix initialization of mailbox descriptor rings
net: dsa: b53: do not set learning and unicast/multicast on up
net: dsa: b53: fix learning on VLAN unaware bridges
net: dsa: b53: fix toggling vlan_filtering
net: dsa: b53: do not program vlans when vlan filtering is off
net: dsa: b53: do not allow to configure VLAN 0
net: dsa: b53: always rejoin default untagged VLAN on bridge leave
net: dsa: b53: fix VLAN ID for untagged vlan on bridge leave
net: dsa: b53: fix flushing old pvid VLAN on pvid change
net: dsa: b53: fix clearing PVID of a port
net: dsa: b53: keep CPU port always tagged again
...
|
|
Introduce struct vm_struct::requested_size so that the requested
(re)allocation size is retained separately from the allocated area size.
This means that KASAN will correctly poison the correct spans of requested
bytes. This also means we can support growing the usable portion of an
allocation that can already be supported by the existing area's existing
allocation.
Link: https://lkml.kernel.org/r/20250426001105.it.679-kees@kernel.org
Fixes: 3ddc2fefe6f3 ("mm: vmalloc: implement vrealloc()")
Signed-off-by: Kees Cook <kees@kernel.org>
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/all/20250408192503.6149a816@outsider.home/
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of fixes:
* iwlwifi: add two missing device entries
* cfg80211: fix a potential out-of-bounds access
* mac80211: fix format of TID to link mapping action frames
* tag 'wireless-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: add support for Killer on MTL
wifi: mac80211: fix the type of status_code for negotiated TID to Link Mapping
wifi: cfg80211: fix out-of-bounds access during multi-link element defragmentation
====================
Link: https://patch.msgid.link/20250506203506.158818-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
wireless features, notably
* stack
- free SKBTX_WIFI_STATUS flag
- fixes for VLAN multicast in multi-link
- improve codel parameters (revert some old twiddling)
* ath12k
- Enable AHB support for IPQ5332.
- Add monitor interface support to QCN9274.
- Add MLO support to WCN7850.
- Add 802.11d scan offload support to WCN7850.
* ath11k
- Restore hibernation support
* iwlwifi
- EMLSR on two 5 GHz links
* mwifiex
- cleanups/refactoring
along with many other small features/cleanups
* tag 'wireless-next-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (177 commits)
Revert "wifi: iwlwifi: clean up config macro"
wifi: iwlwifi: move phy_filters to fw_runtime
wifi: iwlwifi: pcie: make sure to lock rxq->read
wifi: iwlwifi: add definitions for iwl_mac_power_cmd version 2
wifi: iwlwifi: clean up config macro
wifi: iwlwifi: mld: simplify iwl_mld_rx_fill_status()
wifi: iwlwifi: mld: rx: simplify channel handling
wifi: iwlwifi: clean up band in RX metadata
wifi: iwlwifi: mld: skip unknown FW channel load values
wifi: iwlwifi: define API for external FSEQ images
wifi: iwlwifi: mld: allow EMLSR on separated 5 GHz subbands
wifi: iwlwifi: mld: use cfg80211_chandef_get_width()
wifi: iwlwifi: mld: fix iwl_mld_emlsr_disallowed_with_link() return
wifi: iwlwifi: mld: clarify variable type
wifi: iwlwifi: pcie: add support for the reset handshake in MSI
wifi: mac80211_hwsim: Prevent tsf from setting if beacon is disabled
wifi: mac80211: restructure tx profile retrieval for MLO MBSSID
wifi: nl80211: add link id of transmitted profile for MLO MBSSID
wifi: ieee80211: Add helpers to fetch EMLSR delay and timeout values
wifi: mac80211: update ML STA with EML capabilities
...
====================
Link: https://patch.msgid.link/20250506174656.119970-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Accidentally spotted while trying to understand what else needs
to be renamed to netif_ prefix. Most of the calls to dev_set_promiscuity
are adjacent to dev_set_allmulti or dev_disable_lro so it should
be safe to add the lock. Note that new netif_set_promiscuity is
currently unused, the locked paths call __dev_set_promiscuity directly.
Fixes: ad7c7b2172c3 ("net: hold netdev instance lock during sysfs operations")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250506011919.2882313-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The status code should be type of __le16.
Fixes: 83e897a961b8 ("wifi: ieee80211: add definitions for negotiated TID to Link map")
Fixes: 8f500fbc6c65 ("wifi: mac80211: process and save negotiated TID to Link mapping request")
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20250505081946.3927214-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-05-02
We've added 14 non-merge commits during the last 10 day(s) which contain
a total of 13 files changed, 740 insertions(+), 121 deletions(-).
The main changes are:
1) Avoid skipping or repeating a sk when using a UDP bpf_iter,
from Jordan Rife.
2) Fixed a crash when a bpf qdisc is set in
the net.core.default_qdisc, from Amery Hung.
3) A few other fixes in the bpf qdisc, from Amery Hung.
- Always call qdisc_watchdog_init() in the .init prologue such that
the .reset/.destroy epilogue can always call qdisc_watchdog_cancel()
without issue.
- bpf_qdisc_init_prologue() was incorrectly returning an error
when the bpf qdisc is set as the default_qdisc and the mq is creating
the default_qdisc. It is now fixed.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Cleanup bpf qdisc selftests
selftests/bpf: Test attaching a bpf qdisc with incomplete operators
bpf: net_sched: Make some Qdisc_ops ops mandatory
selftests/bpf: Test setting and creating bpf qdisc as default qdisc
bpf: net_sched: Fix bpf qdisc init prologue when set as default qdisc
selftests/bpf: Add tests for bucket resume logic in UDP socket iterators
selftests/bpf: Return socket cookies from sock_iter_batch progs
bpf: udp: Avoid socket skips and repeats during iteration
bpf: udp: Use bpf_udp_iter_batch_item for bpf_udp_iter_state batch items
bpf: udp: Get rid of st_bucket_done
bpf: udp: Make sure iter->batch always contains a full bucket snapshot
bpf: udp: Make mem flags configurable through bpf_iter_udp_realloc_batch
bpf: net_sched: Fix using bpf qdisc as default qdisc
selftests/bpf: Fix compilation errors
====================
Link: https://patch.msgid.link/20250503010755.4030524-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the speed_mode_2500() platform method which is no longer used
or necessary, being superseded by the more flexible get_interfaces()
method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uASM3-0021R3-2B@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a get_interfaces() platform method to allow platforms to indicate
to phylink which interface modes they support - which then allows
phylink to validate on initialisation that the configured PHY interface
mode is actually supported.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uASLn-0021Qd-Mi@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three recent regressions, two in cpufreq and one in the
Intel Soundwire driver, and an unchecked MSR access in the
intel_pstate driver:
- Fix a recent regression causing systems where frequency tables are
used by cpufreq to have issues with setting frequency limits
(Rafael Wysocki)
- Fix a recent regressions causing frequency boost settings to become
out-of-sync if platform firmware updates the registers associated
with frequency boost during system resume (Viresh Kumar)
- Fix a recent regression causing resume failures to occur in the
Intel Soundwire driver if the device handled by it is in runtime
suspend before a system-wide suspend (Rafael Wysocki)
- Fix an unchecked MSR aceess in the intel_pstate driver occurring
when CPUID indicates no turbo, but the driver attempts to enable
turbo frequencies due to a misleading value read from an MSR
(Srinivas Pandruvada)"
* tag 'pm-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode
soundwire: intel_auxdevice: Fix system suspend/resume handling
cpufreq: Fix setting policy limits when frequency tables are used
cpufreq: ACPI: Re-sync CPU boost state on system resume
|
|
Merge cpufreq fixes for 6.15-rc5:
- Fix a recent regression causing systems where frequency tables are
used by cpufreq to have issues with setting frequency limits (Rafael
Wysocki).
- Fix a recent regressions causing frequency boost settings to become
out-of-sync if platform firmware updates the registers associated
with them during system resume (Viresh Kumar).
- Fix an unchecked MSR aceess in the intel_pstate driver occurring when
CPUID indicates no turbo, but the driver attempts to enable turbo
frequencies due to a misleading value read from an MSR (Srinivas
Pandruvada).
* pm-cpufreq:
cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode
cpufreq: Fix setting policy limits when frequency tables are used
cpufreq: ACPI: Re-sync CPU boost state on system resume
|
|
Require that iter->batch always contains a full bucket snapshot. This
invariant is important to avoid skipping or repeating sockets during
iteration when combined with the next few patches. Before, there were
two cases where a call to bpf_iter_udp_batch may only capture part of a
bucket:
1. When bpf_iter_udp_realloc_batch() returns -ENOMEM [1].
2. When more sockets are added to the bucket while calling
bpf_iter_udp_realloc_batch(), making the updated batch size
insufficient [2].
In cases where the batch size only covers part of a bucket, it is
possible to forget which sockets were already visited, especially if we
have to process a bucket in more than two batches. This forces us to
choose between repeating or skipping sockets, so don't allow this:
1. Stop iteration and propagate -ENOMEM up to userspace if reallocation
fails instead of continuing with a partial batch.
2. Try bpf_iter_udp_realloc_batch() with GFP_USER just as before, but if
we still aren't able to capture the full bucket, call
bpf_iter_udp_realloc_batch() again while holding the bucket lock to
guarantee the bucket does not change. On the second attempt use
GFP_NOWAIT since we hold onto the spin lock.
Introduce the udp_portaddr_for_each_entry_from macro and use it instead
of udp_portaddr_for_each_entry to make it possible to continue iteration
from an arbitrary socket. This is required for this patch in the
GFP_NOWAIT case to allow us to fill the rest of a batch starting from
the middle of a bucket and the later patch which skips sockets that were
already seen.
Testing all scenarios directly is a bit difficult, but I did some manual
testing to exercise the code paths where GFP_NOWAIT is used and where
ERR_PTR(err) is returned. I used the realloc test case included later
in this series to trigger a scenario where a realloc happens inside
bpf_iter_udp_batch and made a small code tweak to force the first
realloc attempt to allocate a too-small batch, thus requiring
another attempt with GFP_NOWAIT. Some printks showed both reallocs with
the tests passing:
Apr 25 23:16:24 crow kernel: go again GFP_USER
Apr 25 23:16:24 crow kernel: go again GFP_NOWAIT
With this setup, I also forced each of the bpf_iter_udp_realloc_batch
calls to return -ENOMEM to ensure that iteration ends and that the
read() in userspace fails.
[1]: https://lore.kernel.org/bpf/CABi4-ogUtMrH8-NVB6W8Xg_F_KDLq=yy-yu-tKr2udXE2Mu1Lg@mail.gmail.com/
[2]: https://lore.kernel.org/bpf/7ed28273-a716-4638-912d-f86f965e54bb@linux.dev/
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"ARM-SMMU fixes:
- Fix broken detection of the S2FWB feature
- Ensure page-size bitmap is initialised for SVA domains
- Fix handling of SMMU client devices with duplicate Stream IDs
- Don't fail SMMU probe if Stream IDs are aliased across clients
Intel VT-d fixes:
- Add quirk for IGFX device
- Revert an ATS change to fix a boot failure
AMD IOMMU:
- Fix potential buffer overflow
Core:
- Fix for iommu_copy_struct_from_user()"
* tag 'iommu-fixes-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Apply quirk_iommu_igfx for 8086:0044 (QM57/QS57)
iommu/vt-d: Revert ATS timing change to fix boot failure
iommu: Fix two issues in iommu_copy_struct_from_user()
iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid
iommu/arm-smmu-v3: Fail aliasing StreamIDs more gracefully
iommu/arm-smmu-v3: Fix iommu_device_probe bug due to duplicated stream ids
iommu/arm-smmu-v3: Fix pgsize_bit for sva domains
iommu/arm-smmu-v3: Add missing S2FWB feature detection
|
|
On regular bootup, devices get registered to VMBus first, so when
uio_hv_generic driver for a particular device type is probed,
the device is already initialized and added, so sysfs creation in
hv_uio_probe() works fine. However, when the device is removed
and brought back, the channel gets rescinded and the device again gets
registered to VMBus. However this time, the uio_hv_generic driver is
already registered to probe for that device and in this case sysfs
creation is tried before the device's kobject gets initialized
completely.
Fix this by moving the core logic of sysfs creation of ring buffer,
from uio_hv_generic to HyperV's VMBus driver, where the rest of the
sysfs attributes for the channels are defined. While doing that, make
use of attribute groups and macros, instead of creating sysfs
directly, to ensure better error handling and code flow.
Problematic path:
vmbus_process_offer (A new offer comes for the VMBus device)
vmbus_add_channel_work
vmbus_device_register
|-> device_register
| |...
| |-> hv_uio_probe
| |...
| |-> sysfs_create_bin_file (leads to a warning as
| the primary channel's kobject, which is used to
| create the sysfs file, is not yet initialized)
|-> kset_create_and_add
|-> vmbus_add_channel_kobj (initialization of the primary
channel's kobject happens later)
Above code flow is sequential and the warning is always reproducible in
this path.
Fixes: 9ab877a6ccf8 ("uio_hv_generic: make ring buffer attribute for primary channel")
Cc: stable@kernel.org
Suggested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250502074811.2022-2-namjain@linux.microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After 52358dd63e34 ("net: phy: remove function stubs") there's a
problem if CONFIG_MDIO_BUS is set, but CONFIG_PHYLIB is not.
mdiobus_scan() uses phylib functions like get_phy_device().
Bringing back the stub wouldn't make much sense, because it would
allow to compile mdiobus_scan(), but the function would be unusable.
The stub returned NULL, and we have the following in mdiobus_scan():
phydev = get_phy_device(bus, addr, c45);
if (IS_ERR(phydev))
return phydev;
So calling mdiobus_scan() w/o CONFIG_PHYLIB would cause a crash later in
mdiobus_scan(). In general the PHYLIB functionality isn't optional here.
Consequently, MDIO bus providers depend on PHYLIB.
Therefore factor it out and build it together with the libphy core
modules. In addition make all MDIO bus providers under /drivers/net/mdio
depend on PHYLIB. Same applies to enetc MDIO bus provider. Note that
PHYLIB selects MDIO_DEVRES, therefore we can omit this here.
Fixes: 52358dd63e34 ("net: phy: remove function stubs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504270639.mT0lh2o1-lkp@intel.com/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/c74772a9-dab6-44bf-a657-389df89d85c2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc5).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace ice driver specific DSCP mapping number defines
ICE_DSCP_NUM_VAL and IIDC_MAX_DSCP_MAPPING with
an equivalent kernel define DSCP_MAX.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In preparation of supporting more than a single core PCI driver
for RDMA, break the iidc_rdma.h header file into two more focused
headers.
Only the elements universal to all Intel drivers will remain in
the generic iidc_rdma.h header. Move the ice specific information
to an ice specific header file named iidc_rdma_ice.h.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In preparation of supporting more than a single core PCI driver
for RDMA, homogenize naming to iidc_rdma_* and IIDC_RDMA_*
form.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
