| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
More -next material, notably:
- split ieee80211.h file, it's way too big
- mac80211: initial chanctx work towards NAN
- mac80211: MU-MIMO sniffer improvements
- ath12k: statistics improvements
* tag 'wireless-next-2025-11-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (26 commits)
wifi: cw1200: Fix potential memory leak in cw1200_bh_rx_helper()
wifi: mac80211: make monitor link info check more specific
wifi: mac80211: track MU-MIMO configuration on disabled interfaces
wifi: cfg80211/mac80211: Add fallback mechanism for INDOOR_SP connection
wifi: cfg80211/mac80211: clean up duplicate ap_power handling
wifi: cfg80211: use a C99 initializer in wiphy_register
wifi: cfg80211: fix doc of struct key_params
wifi: mac80211: remove unnecessary vlan NULL check
wifi: mac80211: pass frame type to element parsing
wifi: mac80211: remove "disabling VHT" message
wifi: mac80211: add and use chanctx usage iteration
wifi: mac80211: simplify ieee80211_recalc_chanctx_min_def() API
wifi: mac80211: remove chanctx to link back-references
wifi: mac80211: make link iteration safe for 'break'
wifi: mac80211: fix EHT typo
wifi: cfg80211: fix EHT typo
wifi: ieee80211: split NAN definitions out
wifi: ieee80211: split P2P definitions out
wifi: ieee80211: split S1G definitions out
wifi: ieee80211: split EHT definitions out
...
====================
Link: https://patch.msgid.link/20251112115126.16223-4-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for eswitch switchdev inactive mode
Inactive mode: Drop all traffic going to FDB, Remove
mpfs l2 rules and disconnect adjacent vports.
Active mode: Traffic flows through FDB, mpfs table populated, and
adjacent vports are connected.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Adithya Jayachandran <ajayachandra@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20251108070404.1551708-4-saeed@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In the current implementation, usbnet uses a fixed tx_qlen of:
USB2: 60 * 1518 bytes = 91.08 KB
USB3: 60 * 5 * 1518 bytes = 454.80 KB
Such large transmit queues can be problematic, especially for cellular
modems. For example, with a typical celluar link speed of 10 Mbit/s, a
fully occupied USB3 transmit queue results in:
454.80 KB / (10 Mbit/s / 8 bit/byte) = 363.84 ms
of additional latency.
This patch adds support for Byte Queue Limits (BQL) [1] to dynamically
manage the transmit queue size and reduce latency without sacrificing
throughput.
Testing was performed on various devices using the usbnet driver for
packet transmission:
- DELOCK 66045: USB3 to 2.5 GbE adapter (ax88179_178a)
- DELOCK 61969: USB2 to 1 GbE adapter (asix)
- Quectel RM520: 5G modem (qmi_wwan)
- USB2 Android tethering (cdc_ncm)
No performance degradation was observed for iperf3 TCP or UDP traffic,
while latency for a prioritized ping application was significantly
reduced. For example, using the USB3 to 2.5 GbE adapter, which was fully
utilized by iperf3 UDP traffic, the prioritized ping was improved from
1.6 ms to 0.6 ms. With the same setup but with a 100 Mbit/s Ethernet
connection, the prioritized ping was improved from 35 ms to 5 ms.
[1] https://lwn.net/Articles/469652/
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251106175615.26948-1-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the metadata-aware helper to move packet bytes after skb_push(),
ensuring metadata remains valid after calling the BPF helper.
Also, take care to reserve sufficient headroom for metadata to fit.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-6-5ceb08a9b37b@cloudflare.com
|
|
Use the metadata-aware helper to move packet bytes after skb_pull(),
ensuring metadata remains valid after calling the BPF helper.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-5-5ceb08a9b37b@cloudflare.com
|
|
All callers ignore the return value.
Prepare to reorder memmove() after skb_pull() which is a common pattern.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-4-5ceb08a9b37b@cloudflare.com
|
|
Currently bpf_dynptr_from_skb_meta() marks the dynptr as read-only when
the skb is cloned, preventing writes to metadata.
Remove this restriction and unclone the skb head on bpf_dynptr_write() to
metadata, now that the metadata is preserved during uncloning. This makes
metadata dynptr consistent with skb dynptr, allowing writes regardless of
whether the skb is cloned.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-3-5ceb08a9b37b@cloudflare.com
|
|
Lay groundwork for fixing BPF helpers available to TC(X) programs.
When skb_push() or skb_pull() is called in a TC(X) ingress BPF program, the
skb metadata must be kept in front of the MAC header. Otherwise, BPF
programs using the __sk_buff->data_meta pseudo-pointer lose access to it.
Introduce a helper that moves both metadata and a specified number of
packet data bytes together, suitable as a drop-in replacement for
memmove().
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-1-5ceb08a9b37b@cloudflare.com
|
|
This will be needed for UHR operation parsing, and we
already pass whether or not the frame is an action
frame, replace that by the full type. Note this fixes
a few cases where 'false' was erroneously passed (mesh
and TDLS) and removes ieee802_11_parse_elems_crc() as
it's unused.
Link: https://patch.msgid.link/20251105160810.a476d20a6e01.Ie659535f9357f2f9a3c73f8c059ccfc96bf93b54@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The ieee80211.h file has gotten very long, continue splitting
it by putting NAN definitions into a separate file. Note that
NAN isn't really even IEEE 802.11 but WFA.
Link: https://patch.msgid.link/20251105153843.8da0e796dda2.I7b2ce11220b70e8794019501eabbf8afbaf431a6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The ieee80211.h file has gotten very long, continue splitting
it by putting P2P definitions into a separate file. Note that
P2P isn't really even IEEE 802.11 but WFA.
Link: https://patch.msgid.link/20251105153843.e47b2614e9d2.Id242f61da720e365f6b5d7a4a545fbbc2f1e92b4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The ieee80211.h file has gotten very long, continue splitting
it by putting S1G definitions into a separate file.
Link: https://patch.msgid.link/20251105153843.82c0bddee6e3.Ic6646615286dad240b42e31e9d428c7e4ea40ce0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The ieee80211.h file has gotten very long, continue splitting
it by putting EHT definitions into a separate file.
Link: https://patch.msgid.link/20251105153843.bf77fe169140.I691267e0edd914c604a5bfd447d33be00044c9b4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The ieee80211.h file has gotten very long, continue splitting
it by putting HE definitions into a separate file.
Link: https://patch.msgid.link/20251105153843.6998c0802104.I3dd7cfea6abbd118b999ecdedd48437d39cb0533@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The ieee80211.h file has gotten very long, continue splitting
it by putting VHT definitions into a separate file.
Link: https://patch.msgid.link/20251105153843.c31cb771a250.I787a13064db7d80440101de3445be17881daf1b6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The ieee80211.h file has gotten very long, continue splitting
it by putting HT definitions into a separate file.
Link: https://patch.msgid.link/20251105153843.7532471178d0.Id956a5433ad8658e4e5c0272dbcbb59587206142@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The ieee80211.h file has gotten very long, start splitting it
by putting mesh definitions into a separate file.
Link: https://patch.msgid.link/20251105153843.489713ca8b34.I3befb4bf6ace0315758a1794224ddd18c4652e32@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-11-06 (i40, ice, iavf)
Mohammad Heib introduces a new devlink parameter, max_mac_per_vf, for
controlling the maximum number of MAC address filters allowed by a VF. This
allows administrators to control the VF behavior in a more nuanced manner.
Aleksandr and Przemek add support for Receive Side Scaling of GTP to iAVF
for VFs running on E800 series ice hardware. This improves performance and
scalability for virtualized network functions in 5G and LTE deployments.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
iavf: add RSS support for GTP protocol via ethtool
ice: Extend PTYPE bitmap coverage for GTP encapsulated flows
ice: improve TCAM priority handling for RSS profiles
ice: implement GTP RSS context tracking and configuration
ice: add virtchnl definitions and static data for GTP RSS
ice: add flow parsing for GTP and new protocol field support
i40e: support generic devlink param "max_mac_per_vf"
devlink: Add new "max_mac_per_vf" generic device param
====================
Link: https://patch.msgid.link/20251106225321.1609605-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All three members are effectively of type bool, so make this explicit
and shrink size of struct fixed_phy_status.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/9eca3d7e-fa64-4724-8fdc-f2c1a8f2ae8f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for Open Alliance TC14 (OATC14) 10BASE-T1S PHYs cable
diagnostic feature.
This patch implements:
- genphy_c45_oatc14_cable_test_start() to initiate a cable test
- genphy_c45_oatc14_cable_test_get_status() to retrieve test results
- Helper function to map PHY cable test status to ethtool result codes
- Function declarations and exports for use by PHY drivers
This enables ethtool to report ok, open, short, and undetectable cable
conditions on OATC14 10Base-T1S PHYs.
Open Alliance TC14 10BASE-T1S Advanced Diagnostic PHY Features
Specification ref:
https://opensig.org/wp-content/uploads/2025/06/OPEN_Alliance_10BASE-T1S_Advanced_PHY_features_for-automotive_Ethernet_V2.1b.pdf
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20251105051213.50443-2-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add virtchnl protocol header and field definitions for advanced RSS
configuration including GTPC, GTPU, L2TPv2, ECPRI, PPP, GRE, and IP
fragment headers.
- Define new virtchnl protocol header types
- Add RSS field selectors for tunnel protocols
- Extend static mapping arrays for protocol field matching
- Add L2TPv2 session ID and length+session ID field support
This provides the foundational definitions needed for VF RSS
configuration of tunnel protocols.
Co-developed-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Co-developed-by: Jie Wang <jie1x.wang@intel.com>
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Co-developed-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Co-developed-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Co-developed-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec524 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c433 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c0063 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9dc ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
Including fixes from bluetooth and wireless.
Current release - new code bugs:
- ptp: expose raw cycles only for clocks with free-running counter
- bonding: fix null-deref in actor_port_prio setting
- mdio: ERR_PTR-check regmap pointer returned by
device_node_to_regmap()
- eth: libie: depend on DEBUG_FS when building LIBIE_FWLOG
Previous releases - regressions:
- virtio_net: fix perf regression due to bad alignment of
virtio_net_hdr_v1_hash
- Revert "wifi: ath10k: avoid unnecessary wait for service ready
message" caused regressions for QCA988x and QCA9984
- Revert "wifi: ath12k: Fix missing station power save configuration"
caused regressions for WCN7850
- eth: bnxt_en: shutdown FW DMA in bnxt_shutdown(), fix memory
corruptions after kexec
Previous releases - always broken:
- virtio-net: fix received packet length check for big packets
- sctp: fix races in socket diag handling
- wifi: add an hrtimer-based delayed work item to avoid low
granularity of timers set relatively far in the future, and use it
where it matters (e.g. when performing AP-scheduled channel switch)
- eth: mlx5e:
- correctly propagate error in case of module EEPROM read failure
- fix HW-GRO on systems with PAGE_SIZE == 64kB
- dsa: b53: fixes for tagging, link configuration / RMII, FDB,
multicast
- phy: lan8842: implement latest errata"
* tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
selftests/vsock: avoid false-positives when checking dmesg
net: bridge: fix MST static key usage
net: bridge: fix use-after-free due to MST port state bypass
lan966x: Fix sleeping in atomic context
bonding: fix NULL pointer dereference in actor_port_prio setting
net: dsa: microchip: Fix reserved multicast address table programming
net: wan: framer: pef2256: Switch to devm_mfd_add_devices()
net: libwx: fix device bus LAN ID
net/mlx5e: SHAMPO, Fix header formulas for higher MTUs and 64K pages
net/mlx5e: SHAMPO, Fix skb size check for 64K pages
net/mlx5e: SHAMPO, Fix header mapping for 64K pages
net: ti: icssg-prueth: Fix fdb hash size configuration
net/mlx5e: Fix return value in case of module EEPROM read error
net: gro_cells: Reduce lock scope in gro_cell_poll
libie: depend on DEBUG_FS when building LIBIE_FWLOG
wifi: mac80211_hwsim: Limit destroy_on_close radio removal to netgroup
netpoll: Fix deadlock in memory allocation under spinlock
net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error
virtio-net: fix received length check in big packets
bnxt_en: Fix warning in bnxt_dl_reload_down()
...
|
|
LIBIE_FWLOG is unusable without DEBUG_FS. Mark it in Kconfig.
Fix build error on ixgbe when DEBUG_FS is not set. To not add another
layer of #if IS_ENABLED(LIBIE_FWLOG) in ixgbe fwlog code define debugfs
dentry even when DEBUG_FS isn't enabled. In this case the dummy
functions of LIBIE_FWLOG will be used, so not initialized dentry isn't a
problem.
Fixes: 641585bc978e ("ixgbe: fwlog support for e610")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/lkml/f594c621-f9e1-49f2-af31-23fbcb176058@roeck-us.net/
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251104172333.752445-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and New Hotkey Support:
- input + dell-wmi-base: Electronic privacy screen on/off hotkey
support
- int3472: Fix unregister double free
- wireless-hotkey: Fix Kconfig typo"
* tag 'platform-drivers-x86-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform: x86: Kconfig: fix minor typo in help for WIRELESS_HOTKEY
platform/x86: dell-wmi-base: Handle electronic privacy screen on/off events
Input: Add keycodes for electronic privacy screen on/off hotkeys
MAINTAINERS: Update int3472 maintainers
platform/x86: int3472: Fix double free of GPIO device during unregister
|
|
Revert struct sockaddr from flexible array to fixed 14-byte "sa_data",
to solve over 36,000 -Wflex-array-member-not-at-end warnings, since
struct sockaddr is embedded within many network structs.
With socket/proto sockaddr-based internal APIs switched to use struct
sockaddr_unsized, there should be no more uses of struct sockaddr that
depend on reading beyond the end of struct sockaddr::sa_data that might
trigger bounds checking.
Comparing an x86_64 "allyesconfig" vmlinux build before and after this
patch showed no new "ud1" instructions from CONFIG_UBSAN_BOUNDS nor any
new "field-spanning" memcpy CONFIG_FORTIFY_SOURCE instrumentations.
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-8-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change struct bpf_sock_addr_kern to use sockaddr_unsized for the "uaddr"
field instead of sockaddr. This improves type safety in the BPF cgroup
socket address filtering code.
The casting in __cgroup_bpf_run_filter_sock_addr() is updated to match the
new type, removing an unnecessary cast in the initialization and updating
the conditional assignment to use the appropriate sockaddr_unsized cast.
Additionally rename the "unspec" variable to "storage" to better align
with its usage.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-7-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update BPF cgroup sockaddr filtering infrastructure to use sockaddr_unsized
consistently throughout the call chain, removing redundant explicit casts
from callers.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-6-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that struct sockaddr is no longer used by net.h, remove it.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-4-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update all struct proto_ops connect() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-3-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update all struct proto_ops bind() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-2-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add flexible sockaddr structure to support addresses longer than the
traditional 14-byte struct sockaddr::sa_data limitation without
requiring the full 128-byte sa_data of struct sockaddr_storage. This
allows the network APIs to pass around a pointer to an object that
isn't lying to the compiler about how big it is, but must be accompanied
by its actual size as an additional parameter.
It's possible we may way to migrate to including the size with the
struct in the future, e.g.:
struct sockaddr_unsized {
u16 sa_data_len;
u16 sa_family;
u8 sa_data[] __counted_by(sa_data_len);
};
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-1-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
fixed_phy_add() has a number of problems/disadvantages:
- It uses phy address 0 w/o checking whether a fixed phy with this
address exists already.
- A subsequent call to fixed_phy_register() would also use phy address 0,
because fixed_phy_add() doesn't mark it as used.
- fixed_phy_add() is used from platform code, therefore requires that
fixed_phy code is built-in.
Now that for the only two users (coldfire/5272 and bcm47xx) fixed_phy
creation has been moved to the respective ethernet driver (fec, b44),
we can remove fixed_phy_add().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/bee046a1-1e77-4057-8b04-fdb2a1bbbd08@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In few places a 100FD fixed PHY is used. Create a helper so that users
don't have to define the struct fixed_phy_status.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/bf564b19-e9bc-4896-aeae-9f721cc4fecd@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We can reduce the size of struct phy_device a little by switching
the type of members pause and asym_pause from int to a single bit.
As C99 is supported now, we can use type bool for the bitfield members,
what provides us with the benefit of the usual implicit bool conversions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/764e9a31-b40b-4dc9-b808-118192a16d87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Changing alignment of header would mean it's no longer safe to cast a
2 byte aligned pointer between formats. Use two 16 bit fields to make
it 2 byte aligned as previously.
This fixes the performance regression since
commit ("virtio_net: enable gso over UDP tunnel support.") as it uses
virtio_net_hdr_v1_hash_tunnel which embeds
virtio_net_hdr_v1_hash. Pktgen in guest + XDP_DROP on TAP + vhost_net
shows the TX PPS is recovered from 2.4Mpps to 4.45Mpps.
Fixes: 56a06bd40fab ("virtio_net: enable gso over UDP tunnel support.")
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://patch.msgid.link/20251031060551.126-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When dwmac is synthesised with support for multiple PHY interfaces, the
core provides phy_intf_sel inputs, sampled on reset, to configure the
PHY facing interface. Use stmmac_get_phy_intf_sel() in core code to
determine the dwmac phy_intf_sel input value, and provide a new
platform method called with this value just before we issue a soft
reset to the dwmac core.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vFt4h-0000000Chos-3wxX@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the base infrastructure for Mean Square Error (MSE) diagnostics,
as proposed by the OPEN Alliance "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" [1] specification.
The OPEN Alliance spec defines only average MSE and average peak MSE
over a fixed number of symbols. However, other PHYs, such as the
KSZ9131, additionally expose a worst-peak MSE value latched since the
last channel capture. This API accounts for such vendor extensions by
adding a distinct capability bit and snapshot field.
Channel-to-pair mapping is normally straightforward, but in some cases
(e.g. 100BASE-TX with MDI-X resolution unknown) the mapping is ambiguous.
If hardware does not expose MDI-X status, the exact pair cannot be
determined. To avoid returning misleading per-channel data in this case,
a LINK selector is defined for aggregate MSE measurements.
All investigated devices differ in MSE capabilities, such
as sample rate, number of analyzed symbols, and scaling factors.
For example, the KSZ9131 uses different scaling for MSE and pMSE.
To make this visible to callers, scale limits and timing information
are returned via get_mse_capability().
Some PHYs sample very few symbols at high frequency (e.g. 2 us update
rate). To cover such cases and allow for future high-speed PHYs with
even shorter intervals, the refresh rate is reported as u64 in
picoseconds.
This patch introduces the internal PHY API for Mean Square Error
diagnostics. It defines new kernel-side data types and driver hooks:
- struct phy_mse_capability: describes supported metrics, scale
limits, update interval, and sampling length.
- struct phy_mse_snapshot: holds one correlated measurement set.
- New phy_driver ops: `get_mse_capability()` and `get_mse_snapshot()`.
These definitions form the core kernel API. No user-visible interfaces
are added in this commit.
Standardization notes:
OPEN Alliance defines presence and interpretation of some metrics but does
not fix numeric scales or sampling internals:
- SQI (3-bit, 0..7) is mandatory; correlation to SNR/BER is informative
(OA 100BASE-T1 TC1 v1.0 6.1.2; OA 1000BASE-T1 TC12 v2.2 6.1.2).
- MSE is optional; OA recommends 2^16 symbols and scaling to 0..511,
with a worst-case latch since last read (OA 100BASE-T1 TC1 v1.0 6.1.1; OA
1000BASE-T1 TC12 v2.2 6.1.1). Refresh is recommended (~0.8-2.0 ms for
100BASE-T1; ~80-200 us for 1000BASE-T1). Exact scaling/time windows
are vendor-specific.
- Peak MSE (pMSE) is defined only for 100BASE-T1 as optional, e.g.
128-symbol sliding window with 8-bit range and worst-case latch (OA
100BASE-T1 TC1 v1.0 6.1.3).
Therefore this API exposes which measures and selectors a PHY supports,
and documents where behavior is standard-referenced vs vendor-specific.
[1] <https://opensig.org/wp-content/uploads/2024/01/
Advanced_PHY_features_for_automotive_Ethernet_V1.0.pdf>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20251027122801.982364-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new state NAPI_STATE_THREADED_BUSY_POLL to the NAPI state enum to
enable and disable threaded busy polling.
When threaded busy polling is enabled for a NAPI, enable
NAPI_STATE_THREADED also.
When the threaded NAPI is scheduled, set NAPI_STATE_IN_BUSY_POLL to
signal napi_complete_done not to rearm interrupts.
Whenever NAPI_STATE_THREADED_BUSY_POLL is unset, the
NAPI_STATE_IN_BUSY_POLL will be unset, napi_complete_done unsets the
NAPI_STATE_SCHED_THREADED bit also, which in turn will make the kthread
go to sleep.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Martin Karsten <mkarsten@uwaterloo.ca>
Tested-by: Martin Karsten <mkarsten@uwaterloo.ca>
Link: https://patch.msgid.link/20251028203007.575686-2-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"One documentation fix and a fix for a problem with the slimbus regmap
which was uncovered by some changes in one of the drivers"
* tag 'regmap-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Correct documentation of wake_invert flag
regmap: slimbus: fix bus_context pointer in regmap init calls
|
|
Pull bpf fixes from Alexei Starovoitov:
- Mark migrate_disable/enable() as always_inline to avoid issues with
partial inlining (Yonghong Song)
- Fix powerpc stack register definition in libbpf bpf_tracing.h (Andrii
Nakryiko)
- Reject negative head_room in __bpf_skb_change_head (Daniel Borkmann)
- Conditionally include dynptr copy kfuncs (Malin Jonsson)
- Sync pending IRQ work before freeing BPF ring buffer (Noorain Eqbal)
- Do not audit capability check in x86 do_jit() (Ondrej Mosnacek)
- Fix arm64 JIT of BPF_ST insn when it writes into arena memory
(Puranjay Mohan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf/arm64: Fix BPF_ST into arena memory
bpf: Make migrate_disable always inline to avoid partial inlining
bpf: Reject negative head_room in __bpf_skb_change_head
bpf: Conditionally include dynptr copy kfuncs
libbpf: Fix powerpc's stack register definition in bpf_tracing.h
bpf: Do not audit capability check in do_jit()
bpf: Sync pending IRQ work before freeing ring buffer
|
|
Phase-adjust values are currently limited by a min-max range. Some
hardware requires, for certain pin types, that values be multiples of
a specific granularity, as in the zl3073x driver.
Add a `phase-adjust-gran` pin attribute and an appropriate field in
dpll_pin_properties. If set by the driver, use its value to validate
user-provided phase-adjust values.
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20251029153207.178448-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix blk-crypto reporting EIO when EINVAL is the correct error code
- Two bug fixes for the block zone support
- NVME pull request via Keith:
- Target side authentication fixup
- Peer-to-peer metadata fixup
- null_blk DMA alignment fix
* tag 'block-6.18-20251031' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
null_blk: set dma alignment to logical block size
blk-crypto: use BLK_STS_INVAL for alignment errors
block: make REQ_OP_ZONE_OPEN a write operation
block: fix op_is_zone_mgmt() to handle REQ_OP_ZONE_RESET_ALL
nvme-pci: use blk_map_iter for p2p metadata
nvmet-auth: update sc_c in host response
|
|
The build fails with llvm 21/22:
$ make LLVM=1 -j
...
LD vmlinux.o
GEN .vmlinux.objs
...
BTF .tmp_vmlinux1.btf.o
...
AS .tmp_vmlinux2.kallsyms.o
LD vmlinux.unstripped
BTFIDS vmlinux.unstripped
WARN: resolve_btfids: unresolved symbol migrate_enable
WARN: resolve_btfids: unresolved symbol migrate_disable
make[2]: *** [vmlinux.unstripped] Error 255
make[2]: *** Deleting file 'vmlinux.unstripped'
make[1]: *** [Makefile:1242: vmlinux] Error 2
make: *** [Makefile:248: __sub-make] Error 2
Two functions with identical names but different addresses are
considered ambiguous and removed by "pahole" from vmlinux BTF.
Later resolve_btfids warns since it cannot find them.
Commit 378b7708194f ("sched: Make migrate_{en,dis}able() inline") made
them inlineable in most places, but in vmlinux built with llvm 21 and 22
there are four symbols for migrate_{enable,disable}:
three static functions and one global function.
Fix the issue by marking migrate_{enable,disable} as always inline.
The alternative is to mark them as notrace/nokprobe which is more
drastic. Only bpf programs are prevented from attaching to these
functions. The rest of the tracing shouldn't be affected.
[note: Peter ok-ed the patch, Alexei rewrote commit log]
Fixes: 378b7708194f ("sched: Make migrate_{en,dis}able() inline")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Menglong Dong <menglong.dong@linux.dev>
Link: https://lore.kernel.org/r/20251029183646.3811774-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc4).
No conflicts, adjacent changes:
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
ded9813d17d3 ("net: stmmac: Consider Tx VLAN offload tag length for maxSDU")
26ab9830beab ("net: stmmac: replace has_xxxx with core_type")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an iterator for all PHY's on a MII bus, and phy_find_next()
as a prerequisite.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/cd112f15-401a-43d9-8525-9ff0965a68cd@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the ability to append the incoming IP interface information to
ICMPv4 error messages in accordance with RFC 5837 and RFC 4884. This is
required for more meaningful traceroute results in unnumbered networks.
The feature is disabled by default and controlled via a new sysctl
("net.ipv4.icmp_errors_extension_mask") which accepts a bitmask of ICMP
extensions to append to ICMP error messages. Currently, only a single
value is supported, but the interface and the implementation should be
able to support more extensions, if needed.
Clone the skb and copy the relevant data portions before modifying the
skb as the caller of __icmp_send() still owns the skb after the function
returns. This should be fine since by default ICMP error messages are
rate limited to 1000 per second and no more than 1 per second per
specific host.
Trim or pad the packet to 128 bytes before appending the ICMP extension
structure in order to be compatible with legacy applications that assume
that the ICMP extension structure always starts at this offset (the
minimum length specified by RFC 4884).
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251027082232.232571-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
enqueue_to_backlog() is showing up in kernel profiles on hosts
with many cores, when RFS/RPS is used.
The following softnet_data fields need to be updated:
- input_queue_tail
- input_pkt_queue (next, prev, qlen, lock)
- backlog.state (if input_pkt_queue was empty)
Unfortunately they are currenly using two cache lines:
/* --- cacheline 3 boundary (192 bytes) --- */
call_single_data_t csd __attribute__((__aligned__(64))); /* 0xc0 0x20 */
struct softnet_data * rps_ipi_next; /* 0xe0 0x8 */
unsigned int cpu; /* 0xe8 0x4 */
unsigned int input_queue_tail; /* 0xec 0x4 */
struct sk_buff_head input_pkt_queue; /* 0xf0 0x18 */
/* --- cacheline 4 boundary (256 bytes) was 8 bytes ago --- */
struct napi_struct backlog __attribute__((__aligned__(8))); /* 0x108 0x1f0 */
Add one ____cacheline_aligned_in_smp to make sure they now are using
a single cache line.
Also, because napi_struct has written fields, make @state its first field.
We want to make sure that cpus adding packets to sd->input_pkt_queue
are not slowing down cpus processing their backlog because of
false sharing.
After this patch new layout is:
/* --- cacheline 5 boundary (320 bytes) --- */
long int pad[3] __attribute__((__aligned__(64))); /* 0x140 0x18 */
unsigned int input_queue_tail; /* 0x158 0x4 */
/* XXX 4 bytes hole, try to pack */
struct sk_buff_head input_pkt_queue; /* 0x160 0x18 */
struct napi_struct backlog __attribute__((__aligned__(8))); /* 0x178 0x1f0 */
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251024091240.3292546-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recently, we discovered the following issue through syzkaller:
BUG: KASAN: slab-use-after-free in fb_mode_is_equal+0x285/0x2f0
Read of size 4 at addr ff11000001b3c69c by task syz.xxx
...
Call Trace:
<TASK>
dump_stack_lvl+0xab/0xe0
print_address_description.constprop.0+0x2c/0x390
print_report+0xb9/0x280
kasan_report+0xb8/0xf0
fb_mode_is_equal+0x285/0x2f0
fbcon_mode_deleted+0x129/0x180
fb_set_var+0xe7f/0x11d0
do_fb_ioctl+0x6a0/0x750
fb_ioctl+0xe0/0x140
__x64_sys_ioctl+0x193/0x210
do_syscall_64+0x5f/0x9c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Based on experimentation and analysis, during framebuffer unregistration,
only the memory of fb_info->modelist is freed, without setting the
corresponding fb_display[i]->mode to NULL for the freed modes. This leads
to UAF issues during subsequent accesses. Here's an example of reproduction
steps:
1. With /dev/fb0 already registered in the system, load a kernel module
to register a new device /dev/fb1;
2. Set fb1's mode to the global fb_display[] array (via FBIOPUT_CON2FBMAP);
3. Switch console from fb to VGA (to allow normal rmmod of the ko);
4. Unload the kernel module, at this point fb1's modelist is freed, leaving
a wild pointer in fb_display[];
5. Trigger the bug via system calls through fb0 attempting to delete a mode
from fb0.
Add a check in do_unregister_framebuffer(): if the mode to be freed exists
in fb_display[], set the corresponding mode pointer to NULL.
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
|
|
Per commit 9442490a0286 ("regmap: irq: Support wake IRQ mask inversion")
the wake_invert flag is to support enable register, so cleared bits are
wake disabled.
Fixes: 68622bdfefb9 ("regmap: irq: document mask/wake_invert flags")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Link: https://patch.msgid.link/20251024082344.2188895-1-shawnguo2@yeah.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
