| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two intel_pstate driver issues causing it to crash on sysfs
attribute accesses when some CPUs in the system are offline, finalize
changes related to turning pm_runtime_put() into a void function, and
update Daniel Lezcano's contact information:
- Fix two issues in the intel_pstate driver causing it to crash when
its sysfs interface is used on a system with some offline CPUs
(David Arcari, Srinivas Pandruvada)
- Update the last user of the pm_runtime_put() return value to
discard it and turn pm_runtime_put() into a void function (Rafael
Wysocki)
- Update Daniel Lezcano's contact information in MAINTAINERS and
.mailmap (Daniel Lezcano)"
* tag 'pm-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
MAINTAINERS: Update contact with the kernel.org address
cpufreq: intel_pstate: Fix crash during turbo disable
cpufreq: intel_pstate: Fix NULL pointer dereference in update_cpu_qos_request()
PM: runtime: Change pm_runtime_put() return type to void
pmdomain: imx: gpcv2: Discard pm_runtime_put() return value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kmalloc_obj fixes from Kees Cook:
- Fix pointer-to-array allocation types for ubd and kcsan
- Force size overflow helpers to __always_inline
- Bump __builtin_counted_by_ref to Clang 22.1 from 22.0 (Nathan Chancellor)
* tag 'kmalloc_obj-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kcsan: test: Adjust "expect" allocation type for kmalloc_obj
overflow: Make sure size helpers are always inlined
init/Kconfig: Adjust fixed clang version for __builtin_counted_by_ref
ubd: Use pointer-to-pointers for io_thread_req arrays
|
|
The implementation of ksize() was updated with kernel-doc by commit
fab0694646d7 ("mm/slab: move [__]ksize and slab_ksize() to mm/slub.c")
However, the public header still contains a kernel-doc comment
attached to the ksize() prototype.
Having documentation both in the header and next to the implementation
causes Sphinx to treat the function as being documented twice,
resulting in the warning:
WARNING: Duplicate C declaration, also defined at core-api/mm-api:521
Declaration is '.. c:function:: size_t ksize(const void *objp)'
Kernel-doc guidelines recommend keeping the documentation with the
function implementation. Therefore remove the redundant kernel-doc
block from include/linux/slab.h so that the implementation in slub.c
remains the canonical source for documentation.
No functional change.
Fixes: fab0694646d7 ("mm/slab: move [__]ksize and slab_ksize() to mm/slub.c")
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Link: https://patch.msgid.link/20260226054712.3610744-1-sanjayembedded@gmail.com
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
alloc_empty_sheaf() allocates sheaves from SLAB_KMALLOC caches using
__GFP_NO_OBJ_EXT to avoid recursion, however it does not mark their
allocation tags empty before freeing, which results in a warning when
CONFIG_MEM_ALLOC_PROFILING_DEBUG is set. Fix this by marking allocation
tags for such sheaves as empty.
The problem was technically introduced in commit 4c0a17e28340 but only
becomes possible to hit with commit 913ffd3a1bf5.
Fixes: 4c0a17e28340 ("slab: prevent recursive kmalloc() in alloc_empty_sheaf()")
Fixes: 913ffd3a1bf5 ("slab: handle kmalloc sheaves bootstrap")
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/all/20260223155128.3849-1-00107082@163.com/
Analyzed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Tested-by: Harry Yoo <harry.yoo@oracle.com>
Tested-by: David Wang <00107082@163.com>
Link: https://patch.msgid.link/20260225163407.2218712-1-surenb@google.com
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
Guillaume reported crashes via corrupted RCU callback function pointers
during KUnit testing. The crash was traced back to the pidfs rhashtable
conversion which replaced the 24-byte rb_node with an 8-byte rhash_head
in struct pid, shrinking it from 160 to 144 bytes.
struct kthread (without CONFIG_BLK_CGROUP) is also 144 bytes. With
CONFIG_SLAB_MERGE_DEFAULT and SLAB_HWCACHE_ALIGN both round up to
192 bytes and share the same slab cache. struct pid.rcu.func and
struct kthread.affinity_node both sit at offset 0x78.
When a kthread exits via make_task_dead() it bypasses kthread_exit() and
misses the affinity_node cleanup. free_kthread_struct() frees the memory
while the node is still linked into the global kthread_affinity_list. A
subsequent list_del() by another kthread writes through dangling list
pointers into the freed and reused memory, corrupting the pid's
rcu.func pointer.
Instead of patching free_kthread_struct() to handle the missed cleanup,
consolidate all kthread exit paths. Turn kthread_exit() into a macro
that calls do_exit() and add kthread_do_exit() which is called from
do_exit() for any task with PF_KTHREAD set. This guarantees that
kthread-specific cleanup always happens regardless of the exit path -
make_task_dead(), direct do_exit(), or kthread_exit().
Replace __to_kthread() with a new tsk_is_kthread() accessor in the
public header. Export do_exit() since module code using the
kthread_exit() macro now needs it directly.
Reported-by: Guillaume Tucker <gtucker@gtucker.io>
Tested-by: Guillaume Tucker <gtucker@gtucker.io>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: David Gow <davidgow@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20260224-mittlerweile-besessen-2738831ae7f6@brauner
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 4d13f4304fa4 ("kthread: Implement preferred affinity")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix an uninitialized variable in file_getattr().
The flags_valid field wasn't initialized before calling
vfs_fileattr_get(), triggering KMSAN uninit-value reports in fuse
- Fix writeback wakeup and logging timeouts when DETECT_HUNG_TASK is
not enabled.
sysctl_hung_task_timeout_secs is 0 in that case causing spurious
"waiting for writeback completion for more than 1 seconds" warnings
- Fix a null-ptr-deref in do_statmount() when the mount is internal
- Add missing kernel-doc description for the @private parameter in
iomap_readahead()
- Fix mount namespace creation to hold namespace_sem across the mount
copy in create_new_namespace().
The previous drop-and-reacquire pattern was fragile and failed to
clean up mount propagation links if the real rootfs was a shared or
dependent mount
- Fix /proc mount iteration where m->index wasn't updated when
m->show() overflows, causing a restart to repeatedly show the same
mount entry in a rapidly expanding mount table
- Return EFSCORRUPTED instead of ENOSPC in minix_new_inode() when the
inode number is out of range
- Fix unshare(2) when CLONE_NEWNS is set and current->fs isn't shared.
copy_mnt_ns() received the live fs_struct so if a subsequent
namespace creation failed the rollback would leave pwd and root
pointing to detached mounts. Always allocate a new fs_struct when
CLONE_NEWNS is requested
- fserror bug fixes:
- Remove the unused fsnotify_sb_error() helper now that all callers
have been converted to fserror_report_metadata
- Fix a lockdep splat in fserror_report() where igrab() takes
inode::i_lock which can be held in IRQ context.
Replace igrab() with a direct i_count bump since filesystems
should not report inodes that are about to be freed or not yet
exposed
- Handle error pointer in procfs for try_lookup_noperm()
- Fix an integer overflow in ep_loop_check_proc() where recursive calls
returning INT_MAX would overflow when +1 is added, breaking the
recursion depth check
- Fix a misleading break in pidfs
* tag 'vfs-7.0-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pidfs: avoid misleading break
eventpoll: Fix integer overflow in ep_loop_check_proc()
proc: Fix pointer error dereference
fserror: fix lockdep complaint when igrabbing inode
fsnotify: drop unused helper
unshare: fix unshare_fs() handling
minix: Correct errno in minix_new_inode
namespace: fix proc mount iteration
mount: hold namespace_sem across copy in create_new_namespace()
iomap: Describe @private in iomap_readahead()
statmount: Fix the null-ptr-deref in do_statmount()
writeback: Fix wakeup and logging timeouts for !DETECT_HUNG_TASK
fs: init flags_valid before calling vfs_fileattr_get
|
|
With kmalloc_obj() performing implicit size calculations, the embedded
size_mul() calls, while marked inline, were not always being inlined.
I noticed a couple places where allocations were making a call out for
things that would otherwise be compile-time calculated. Force the
compilers to always inline these calculations.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20260224232451.work.614-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
LUO keeps track of successful retrieve attempts on a LUO file. It does so
to avoid multiple retrievals of the same file. Multiple retrievals cause
problems because once the file is retrieved, the serialized data
structures are likely freed and the file is likely in a very different
state from what the code expects.
The retrieve boolean in struct luo_file keeps track of this, and is passed
to the finish callback so it knows what work was already done and what it
has left to do.
All this works well when retrieve succeeds. When it fails,
luo_retrieve_file() returns the error immediately, without ever storing
anywhere that a retrieve was attempted or what its error code was. This
results in an errored LIVEUPDATE_SESSION_RETRIEVE_FD ioctl to userspace,
but nothing prevents it from trying this again.
The retry is problematic for much of the same reasons listed above. The
file is likely in a very different state than what the retrieve logic
normally expects, and it might even have freed some serialization data
structures. Attempting to access them or free them again is going to
break things.
For example, if memfd managed to restore 8 of its 10 folios, but fails on
the 9th, a subsequent retrieve attempt will try to call
kho_restore_folio() on the first folio again, and that will fail with a
warning since it is an invalid operation.
Apart from the retry, finish() also breaks. Since on failure the
retrieved bool in luo_file is never touched, the finish() call on session
close will tell the file handler that retrieve was never attempted, and it
will try to access or free the data structures that might not exist, much
in the same way as the retry attempt.
There is no sane way of attempting the retrieve again. Remember the error
retrieve returned and directly return it on a retry. Also pass this
status code to finish() so it can make the right decision on the work it
needs to do.
This is done by changing the bool to an integer. A value of 0 means
retrieve was never attempted, a positive value means it succeeded, and a
negative value means it failed and the error code is the value.
Link: https://lkml.kernel.org/r/20260216132221.987987-1-pratyush@kernel.org
Fixes: 7c722a7f44e0 ("liveupdate: luo_file: implement file systems callbacks")
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In a few rare configurations with extra warnings eanbled, the new
drm_pagemap_migrate_populate_ram_pfn() calls vma_alloc_folio_noprof() but
that does not use all the arguments, leading to a harmless warning:
drivers/gpu/drm/drm_pagemap.c: In function 'drm_pagemap_migrate_populate_ram_pfn':
drivers/gpu/drm/drm_pagemap.c:701:63: error: parameter 'addr' set but not used [-Werror=unused-but-set-parameter=]
701 | unsigned long addr)
| ~~~~~~~~~~~~~~^~~~
Replace the macro with an inline function so the compiler can see how the
argument would be used, but is still able to optimize out the assignments.
Link: https://lkml.kernel.org/r/20260216121751.2378374-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 4e6e8c2b757f ("binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4") added
support for AT_HWCAP3 and AT_HWCAP4, but it missed updating the AUX
vector size calculation in create_elf_fdpic_tables() and
AT_VECTOR_SIZE_BASE in include/linux/auxvec.h.
Similar to the fix for AT_HWCAP2 in commit c6a09e342f8e ("binfmt_elf_fdpic:
fix AUXV size calculation when ELF_HWCAP2 is defined"), this omission
leads to a mismatch between the reserved space and the actual number of
AUX entries, eventually triggering a kernel BUG_ON(csp != sp).
Fix this by incrementing nitems when ELF_HWCAP3 or ELF_HWCAP4 are
defined and updating AT_VECTOR_SIZE_BASE.
Cc: Mark Brown <broonie@kernel.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@futurfusion.io>
Fixes: 4e6e8c2b757f ("binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4")
Signed-off-by: Andrei Vagin <avagin@google.com>
Link: https://patch.msgid.link/20260217180108.1420024-2-avagin@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The default_gfp() helper that I added is not wrong, but it turns out
that it causes unnecessary headaches for 'sparse' which doesn't support
the use of __VA_OPT__ (introduced in C++20 and C23, and supported by gcc
and clang for a long time).
We do already use __VA_OPT__ in some other cases in the kernel (drm/xe
and btrfs), but it has been fairly limited. Now it triggers for pretty
much everything, and sparse ends up not working at all.
We can use the traditional gcc ',##__VA_ARGS__' syntax instead: it may
not be the "C standard" way and is slightly less natural in this
context, but it is the traditional model for this and avoids the sparse
problem.
Reported-and-tested-by: Ricardo Ribalda <ribalda@chromium.org>
Reported-and-tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Ben Dooks <ben.dooks@codethink.co.uk>
Fixes: e19e1b480ac7 ("add default_gfp() helper macro and use it in the new *alloc_obj() helpers")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The Lenovo ThinkPad X1 Fold 16 Gen 1 has an OV5675 sensor (ACPI HID
OVTI5675) behind an INT3472 discrete PMIC controller. The INT3472
_DSM returns GPIO type 0x10 for one of the pins, which controls the
DOVDD (digital I/O power) regulator enable.
Type 0x10 is not currently handled by the driver, causing the GPIO to
be ignored with a warning. Add INT3472_GPIO_TYPE_DOVDD (0x10) and
handle it as a regulator with con_id "dovdd" to match the supply name
used by sensor drivers (e.g. ov5675).
Also increase GPIO_SUPPLY_NAME_LENGTH from 5 to 6 to accommodate
the "dovdd" name (5 chars + null terminator).
Signed-off-by: Leif Skunberg <diamondback@cohunt.app>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260210132129.17943-1-diamondback@cohunt.app
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The primary role of pm_runtime_put() is to decrement the runtime PM
usage counter of the given device. It always does that regardless of
the value returned by it later.
In addition, if the runtime PM usage counter after decrementation turns
out to be zero, a work item is queued up to check whether or not the
device can be suspended. This is not guaranteed to succeed though and
even if it is successful, the device may still not be suspended going
forward.
There are multiple valid reasons why pm_runtime_put() may not decide to
queue up the work item mentioned above, including, but not limited to,
the case when user space has written "on" to the device's runtime PM
"control" file in sysfs. In all of those cases, pm_runtime_put()
returns a negative error code (even though the device's runtime PM
usage counter has been successfully decremented by it) which is very
confusing. In fact, its return value should only be used for debug
purposes and care should be taken when doing it even in that case.
Accordingly, to avoid the confusion mentioned above, change the return
type of pm_runtime_put() to void.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://patch.msgid.link/14387202.RDIVbhacDa@rafael.j.wysocki
|
|
Move claimed and retune control flags out of the bitfield word to
avoid unrelated RMW side effects in asynchronous contexts.
The host->claimed bit shared a word with retune flags. Writes to claimed
in __mmc_claim_host() or retune_now in mmc_mq_queue_rq() can overwrite
other bits when concurrent updates happen in other contexts, triggering
spurious WARN_ON(!host->claimed). Convert claimed, can_retune,
retune_now and retune_paused to bool to remove shared-word coupling.
Fixes: 6c0cedd1ef952 ("mmc: core: Introduce host claiming by context")
Fixes: 1e8e55b67030c ("mmc: block: Add CQE support")
Cc: stable@vger.kernel.org
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Penghe Geng <pgeng@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Before rseq became extensible, its original size was 32 bytes even
though the active rseq area was only 20 bytes. This had the following
impact in terms of userspace ecosystem evolution:
* The GNU libc between 2.35 and 2.39 expose a __rseq_size symbol set
to 32, even though the size of the active rseq area is really 20.
* The GNU libc 2.40 changes this __rseq_size to 20, thus making it
express the active rseq area.
* Starting from glibc 2.41, __rseq_size corresponds to the
AT_RSEQ_FEATURE_SIZE from getauxval(3).
This means that users of __rseq_size can always expect it to
correspond to the active rseq area, except for the value 32, for
which the active rseq area is 20 bytes.
Exposing a 32 bytes feature size would make life needlessly painful
for userspace. Therefore, add a reserved field at the end of the
rseq area to bump the feature size to 33 bytes. This reserved field
is expected to be replaced with whatever field will come next,
expecting that this field will be larger than 1 byte.
The effect of this change is to increase the size from 32 to 64 bytes
before we actually have fields using that memory.
Clarify the allocation size and alignment requirements in the struct
rseq uapi comment.
Change the value returned by getauxval(AT_RSEQ_ALIGN) to return the
value of the active rseq area size rounded up to next power of 2, which
guarantees that the rseq structure will always be aligned on the nearest
power of two large enough to contain it, even as it grows. Change the
alignment check in the rseq registration accordingly.
This will minimize the amount of ABI corner-cases we need to document
and require userspace to play games with. The rule stays simple when
__rseq_size != 32:
#define rseq_field_available(field) (__rseq_size >= offsetofend(struct rseq_abi, field))
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260220200642.1317826-3-mathieu.desnoyers@efficios.com
|
|
objtool warns about this function being called inside of a uaccess
section:
kernel/entry/common.o: warning: objtool: irqentry_exit+0x1dc: call to rseq_arm_slice_extension_timer() with UACCESS enabled
Interestingly, this happens with CONFIG_RSEQ_SLICE_EXTENSION disabled,
so this is an empty function, as the normal implementation is
already marked __always_inline.
I could reproduce this multiple times with gcc-11 but not with gcc-15,
so the compiler probably got better at identifying the trivial function.
Mark all the empty helpers for !RSEQ_SLICE_EXTENSION as __always_inline
for consistency, avoiding this warning.
Fixes: 0ac3b5c3dc45 ("rseq: Implement time slice extension enforcement timer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260206074122.709580-1-arnd@kernel.org
|
|
Vincent reported that he was seeing undue lag clamping in a mixed
slice workload. Implement the max_slice tracking as per the todo
comment.
Fixes: 147f3efaa241 ("sched/fair: Implement an EEVDF-like scheduling policy")
Reported-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Link: https://patch.msgid.link/20250422101628.GA33555@noisy.programming.kicks-ass.net
|
|
Pull fsverity fixes from Eric Biggers:
- Fix a build error on parisc
- Remove the non-large-folio-aware function fsverity_verify_page()
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: fix build error by adding fsverity_readahead() stub
fsverity: remove fsverity_verify_page()
f2fs: make f2fs_verify_cluster() partially large-folio-aware
f2fs: remove unnecessary ClearPageUptodate in f2fs_verify_cluster()
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Most simple allocations use GFP_KERNEL, and with the new allocation
helpers being introduced, let's just take advantage of that to simplify
that default case.
It's a numbers game:
git grep 'alloc_obj(' |
sed 's/.*\(GFP_[_A-Z]*\).*/\1/' |
sort | uniq -c | sort -n | tail
shows that about 90% of all those new allocator instances just use that
standard GFP_KERNEL.
Those helpers are already macros, and we can easily just make it be the
default case when the gfp argument is missing.
And yes, we could do that for all the legacy interfaces too, but let's
keep it to just the new ones at least for now, since those all got
converted recently anyway, so this is not any "extra" noise outside of
that limited conversion.
And, in fact, I want to do this before doing the -rc1 release, exactly
so that we don't get extra merge conflicts.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 69050f8d6d07 ("treewide: Replace kmalloc with kmalloc_obj for
non-scalar types") started using the new allocation helpers, and in the
process showed that they were completely non-working.
The overflow logic in overflows_flex_counter_type() is completely the
wrong way around, and that broke __alloc_flex() completely. By chance,
the resulting code was then such a mess that clang generated
sufficiently garbage code that objtool warned about it all. Which made
it somewhat quicker to narrow things down.
While fixing overflows_flex_counter_type() would presumably fix this
all, I'm excising the whole broken overflow logic from __alloc_flex(),
because we don't want that kind of code in basic allocation functions
anyway.
That (no longer) broken overflows_flex_counter_type() thing needs to be
inserted into the actual __set_flex_counter() logic in the unlikely case
that we ever want this at all. And made conditional.
Fixes: 81cee9166a90 ("compiler_types: Introduce __flex_counter() and family")
Fixes: 69050f8d6d07 ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
Cc: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/all/CAHk-=whEd020BYzGTzYrENjD9Z5_82xx6h8HsQvH5xDSnv0=Hw@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kmalloc_obj conversion from Kees Cook:
"This does the tree-wide conversion to kmalloc_obj() and friends using
coccinelle, with a subsequent small manual cleanup of whitespace
alignment that coccinelle does not handle.
This uncovered a clang bug in __builtin_counted_by_ref(), so the
conversion is preceded by disabling that for current versions of
clang. The imminent clang 22.1 release has the fix.
I've done allmodconfig build tests for x86_64, arm64, i386, and arm. I
did defconfig builds for alpha, m68k, mips, parisc, powerpc, riscv,
s390, sparc, sh, arc, csky, xtensa, hexagon, and openrisc"
* tag 'kmalloc_obj-treewide-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kmalloc_obj: Clean up after treewide replacements
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
compiler_types: Disable __builtin_counted_by_ref for Clang
|
|
Pull NTB (PCIe non-transparent bridge) updates from Jon Mason:
"NTB updates include debugfs improvements, correctness fixes, cleanups,
and new hardware support:
ntb_transport QP stats are converted to seq_file, a tx_memcpy_offload
module parameter is introduced with associated ordering fixes, and a
debugfs queue name truncation bug is corrected.
Additional fixes address format specifier mismatches in ntb_tool and
boundary conditions in the Switchtec driver, while unused MSI helpers
are removed and the codebase migrates to dma_map_phys().
Intel Gen6 (Diamond Rapids) NTB support is also added"
* tag 'ntb-7.0' of https://github.com/jonmason/ntb:
NTB: ntb_transport: Use seq_file for QP stats debugfs
NTB: ntb_transport: Fix too small buffer for debugfs_name
ntb/ntb_tool: correct sscanf format for u64 and size_t in tool_peer_mw_trans_write
ntb: intel: Add Intel Gen6 NTB support for DiamondRapids
NTB/msi: Remove unused functions
ntb: ntb_hw_switchtec: Increase MAX_MWS limit to 256
ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access
ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut
NTB: epf: allow built-in build
ntb: migrate to dma_map_phys instead of map_page
NTB: ntb_transport: Add 'tx_memcpy_offload' module option
NTB: ntb_transport: Remove unused 'retries' field from ntb_queue_entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- A fix for a missing URING_CMD128 opcode check, fixing an issue with
the SQE mixed mode support introduced in 6.19. Merged late due to
having multiple dependencies
- Add sqe->cmd size checking for big SQEs, similar to what we have for
normal sized SQEs
- Fix a race condition in zcrx, that leads to a double free
* tag 'io_uring-20260221' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: Add size check for sqe->cmd
io_uring: add IORING_OP_URING_CMD128 to opcode checks
io_uring/zcrx: fix user_ref race between scrub and refill paths
|
|
Coccinelle doesn't handle re-indenting line escapes. Fix the 2 places
where these got misaligned.
Remove 2 now-redundant type casts, found with:
$ git grep -P 'struct (\S+).*\)\s*k\S+alloc_(objs?|flex)\(struct \1'
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Unfortunately, there is a corner case of __builtin_counted_by_ref()
usage that crashes[1] Clang since support was introduced in Clang 19.
Disable it prior to Clang 22. Found while tested kmalloc_obj treewide
refactoring (via kmalloc_flex() usage).
Link: https://github.com/llvm/llvm-project/issues/182575 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix possible dereference of uninitialized pointer
When validating the persistent ring buffer on boot up, if the first
validation fails, a reference to "head_page" is performed in the
error path, but it skips over the initialization of that variable.
Move the initialization before the first validation check.
- Fix use of event length in validation of persistent ring buffer
On boot up, the persistent ring buffer is checked to see if it is
valid by several methods. One being to walk all the events in the
memory location to make sure they are all valid. The length of the
event is used to move to the next event. This length is determined by
the data in the buffer. If that length is corrupted, it could
possibly make the next event to check located at a bad memory
location.
Validate the length field of the event when doing the event walk.
- Fix function graph on archs that do not support use of ftrace_ops
When an architecture defines HAVE_DYNAMIC_FTRACE_WITH_ARGS, it means
that its function graph tracer uses the ftrace_ops of the function
tracer to call its callbacks. This allows a single registered
callback to be called directly instead of checking the callback's
meta data's hash entries against the function being traced.
For architectures that do not support this feature, it must always
call the loop function that tests each registered callback (even if
there's only one). The loop function tests each callback's meta data
against its hash of functions and will call its callback if the
function being traced is in its hash map.
The issue was that there was no check against this and the direct
function was being called even if the architecture didn't support it.
This meant that if function tracing was enabled at the same time as a
callback was registered with the function graph tracer, its callback
would be called for every function that the function tracer also
traced, even if the callback's meta data only wanted to be called
back for a small subset of functions.
Prevent the direct calling for those architectures that do not
support it.
- Fix references to trace_event_file for hist files
The hist files used event_file_data() to get a reference to the
associated trace_event_file the histogram was attached to. This would
return a pointer even if the trace_event_file is about to be freed
(via RCU). Instead it should use the event_file_file() helper that
returns NULL if the trace_event_file is marked to be freed so that no
new references are added to it.
- Wake up hist poll readers when an event is being freed
When polling on a hist file, the task is only awoken when a hist
trigger is triggered. This means that if an event is being freed
while there's a task waiting on its hist file, it will need to wait
until the hist trigger occurs to wake it up and allow the freeing to
happen. Note, the event will not be completely freed until all
references are removed, and a hist poller keeps a reference. But it
should still be woken when the event is being freed.
* tag 'trace-v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Wake up poll waiters for hist files when removing an event
tracing: Fix checking of freed trace_event_file for hist files
fgraph: Do not call handlers direct when not using ftrace_ops
tracing: ring-buffer: Fix to check event length before using
ring-buffer: Fix possible dereference of uninitialized pointer
|
|
ntbm_msi_free_irq() and ntb_msi_peer_addr() were both added in 2019's
commit 26b3a37b9284 ("NTB: Introduce MSI library")
but have remained unused.
Remove them, and the ntbm_msi_callback_match() helper that
was used by ntbm_msi_free_irq().
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
The event_hist_poll() function attempts to verify whether an event file is
being removed, but this check may not occur or could be unnecessarily
delayed. This happens because hist_poll_wakeup() is currently invoked only
from event_hist_trigger() when a hist command is triggered. If the event
file is being removed, no associated hist command will be triggered and a
waiter will be woken up only after an unrelated hist command is triggered.
Fix the issue by adding a call to hist_poll_wakeup() in
remove_event_file_dir() after setting the EVENT_FILE_FL_FREED flag. This
ensures that a task polling on a hist file is woken up and receives
EPOLLERR.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-3-petr.pavlu@suse.com
Fixes: 1bd13edbbed6 ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The function graph tracer was modified to us the ftrace_ops of the
function tracer. This simplified the code as well as allowed more features
of the function graph tracer.
Not all architectures were converted over as it required the
implementation of HAVE_DYNAMIC_FTRACE_WITH_ARGS to implement. For those
architectures, it still did it the old way where the function graph tracer
handle was called by the function tracer trampoline. The handler then had
to check the hash to see if the registered handlers wanted to be called by
that function or not.
In order to speed up the function graph tracer that used ftrace_ops, if
only one callback was registered with function graph, it would call its
function directly via a static call.
Now, if the architecture does not support the use of using ftrace_ops and
still has the ftrace function trampoline calling the function graph
handler, then by doing a direct call it removes the check against the
handler's hash (list of functions it wants callbacks to), and it may call
that handler for functions that the handler did not request calls for.
On 32bit x86, which does not support the ftrace_ops use with function
graph tracer, it shows the issue:
~# trace-cmd start -p function -l schedule
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
2) * 11898.94 us | schedule();
3) # 1783.041 us | schedule();
1) | schedule() {
------------------------------------------
1) bash-8369 => kworker-7669
------------------------------------------
1) | schedule() {
------------------------------------------
1) kworker-7669 => bash-8369
------------------------------------------
1) + 97.004 us | }
1) | schedule() {
[..]
Now by starting the function tracer is another instance:
~# trace-cmd start -B foo -p function
This causes the function graph tracer to trace all functions (because the
function trace calls the function graph tracer for each on, and the
function graph trace is doing a direct call):
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
1) 1.669 us | } /* preempt_count_sub */
1) + 10.443 us | } /* _raw_spin_unlock_irqrestore */
1) | tick_program_event() {
1) | clockevents_program_event() {
1) 1.044 us | ktime_get();
1) 6.481 us | lapic_next_event();
1) + 10.114 us | }
1) + 11.790 us | }
1) ! 181.223 us | } /* hrtimer_interrupt */
1) ! 184.624 us | } /* __sysvec_apic_timer_interrupt */
1) | irq_exit_rcu() {
1) 0.678 us | preempt_count_sub();
When it should still only be tracing the schedule() function.
To fix this, add a macro FGRAPH_NO_DIRECT to be set to 0 when the
architecture does not support function graph use of ftrace_ops, and set to
1 otherwise. Then use this macro to know to allow function graph tracer to
call the handlers directly or not.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://patch.msgid.link/20260218104244.5f14dade@gandalf.local.home
Fixes: cc60ee813b503 ("function_graph: Use static_call and branch to optimize entry function")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200"
* tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: nfc: nci: Fix parameter validation for packet data
net/mlx5e: Use unsigned for mlx5e_get_max_num_channels
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
net/mlx5e: MACsec, add ASO poll loop in macsec_aso_set_arm_event
net/mlx5: Fix misidentification of write combining CQE during poll loop
net/mlx5e: Fix misidentification of ASO CQE during poll loop
net/mlx5: Fix multiport device check over light SFs
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
bnge: fix reserving resources from FW
eth: fbnic: Advertise supported XDP features.
rds: tcp: fix uninit-value in __inet_bind
net/rds: Fix NULL pointer dereference in rds_tcp_accept_one
octeontx2-af: Fix default entries mcam entry action
net/mlx5e: XSK, Fix unintended ICOSQ change
ipv6: icmp: icmpv6_xrlim_allow() optimization if net.ipv6.icmp.ratelimit is zero
ipv4: icmp: icmpv4_xrlim_allow() optimization if net.ipv4.icmp_ratelimit is zero
ipv6: icmp: remove obsolete code in icmpv6_xrlim_allow()
inet: move icmp_global_{credit,stamp} to a separate cache line
icmp: prevent possible overflow in icmp_global_allow()
selftests/net: packetdrill: add ipv4-mapped-ipv6 tests
...
|
|
The memory pointer returned by the report_fixup() hook does not get
freed by the caller. Instead, report_fixup() must return (in return
value and *rsize) a memory buffer with at least the same lifetime as
the input buffer (defined by rdesc and original *rsize).
This is usually achieved using one of the following techniques:
* Returning a pointer and size to a sub-portion of the input buffer
* Returning a pointer to a static buffer
* Allocating a buffer with a devm_*() function,
which will automatically get freed when the device is removed.
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Driver is using num_vhca_ports capability to distinguish between
multiport master device and multiport slave device. num_vhca_ports is a
capability the driver sets according to the MAX num_vhca_ports
capability reported by FW. On the other hand, light SFs doesn't set the
above capbility.
This leads to wrong results whenever light SFs is checking whether he is
a multiport master or slave.
Therefore, use the MAX capability to distinguish between master and
slave devices.
Fixes: e71383fb9cd1 ("net/mlx5: Light probe local SFs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260218072904.1764634-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For SQE128, sqe->cmd provides 80 bytes for uring_cmd. Add macro to
check if size of user struct does not exceed 80 bytes at compile time.
User doesn't have to track this manually during development.
Replace io_uring_sqe_cmd() inline func with macro and add
io_uring_sqe128_cmd() which checks struct
size for 16 bytes cmd and 80 bytes cmd respectively.
Signed-off-by: Govindarajulu Varadarajan <govind.varadar@gmail.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove this helper now that all users have been converted to
fserror_report_metadata as of 7.0-rc1.
Cc: jack@suse.cz
Cc: amir73il@gmail.com
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/177148129543.716249.980530449513340111.stgit@frogsfrogsfrogs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "mm/vmscan: fix demotion targets checks in reclaim/demotion" fixes a
couple of issues in the demotion code - pages were failed demotion
and were finding themselves demoted into disallowed nodes (Bing Jiao)
- "Remove XA_ZERO from error recovery of dup_mmap()" fixes a rare
mapledtree race and performs a number of cleanups (Liam Howlett)
- "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use
them" implements a lot of cleanups following on from the conversion
of the VMA flags into a bitmap (Lorenzo Stoakes)
- "support batch checking of references and unmapping for large folios"
implements batching to greatly improve the performance of reclaiming
clean file-backed large folios (Baolin Wang)
- "selftests/mm: add memory failure selftests" does as claimed (Miaohe
Lin)
* tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (36 commits)
mm/page_alloc: clear page->private in free_pages_prepare()
selftests/mm: add memory failure dirty pagecache test
selftests/mm: add memory failure clean pagecache test
selftests/mm: add memory failure anonymous page test
mm: rmap: support batched unmapping for file large folios
arm64: mm: implement the architecture-specific clear_flush_young_ptes()
arm64: mm: support batch clearing of the young flag for large folios
arm64: mm: factor out the address and ptep alignment into a new helper
mm: rmap: support batched checks of the references for large folios
tools/testing/vma: add VMA userland tests for VMA flag functions
tools/testing/vma: separate out vma_internal.h into logical headers
tools/testing/vma: separate VMA userland tests into separate files
mm: make vm_area_desc utilise vma_flags_t only
mm: update all remaining mmap_prepare users to use vma_flags_t
mm: update shmem_[kernel]_file_*() functions to use vma_flags_t
mm: update secretmem to use VMA flags on mmap_prepare
mm: update hugetlbfs to use VMA flags on mmap_prepare
mm: add basic VMA flag operation helper functions
tools: bitmap: add missing bitmap_[subset(), andnot()]
mm: add mk_vma_flags() bitmap flag macro helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly fixes on top of the power management updates merged
recently in cpuidle governors, in the Intel RAPL power capping driver
and in the wake IRQ management code:
- Fix the handling of package-scope MSRs in the intel_rapl power
capping driver when called from the PMU subsystem and make it add
all package CPUs to the PMU cpumask to allow tools to read RAPL
events from any CPU in the package (Kuppuswamy Satharayananyan)
- Rework the invalid version check in the intel_rapl_tpmi power
capping driver to account for the fact that on partitioned systems,
multiple TPMI instances may exist per package, but RAPL registers
are only valid on one instance (Kuppuswamy Satharayananyan)
- Describe the new intel_idle.table command line option in the
admin-guide intel_idle documentation (Artem Bityutskiy)
- Fix a crash in the ladder cpuidle governor on systems with only one
(polling) idle state available by making the cpuidle core bypass
the governor in those cases and adjust the other existing governors
to that change (Aboorva Devarajan, Christian Loehle)
- Update kerneldoc comments for wake IRQ management functions that
have not been matching the code (Wang Jiayue)"
* tag 'pm-7.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: menu: Remove single state handling
cpuidle: teo: Remove single state handling
cpuidle: haltpoll: Remove single state handling
cpuidle: Skip governor when only one idle state is available
powercap: intel_rapl_tpmi: Remove FW_BUG from invalid version check
PM: sleep: wakeirq: Update outdated documentation comments
Documentation: PM: Document intel_idle.table command line option
powercap: intel_rapl: Expose all package CPUs in PMU cpumask
powercap: intel_rapl: Remove incorrect CPU check in PMU context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Remove macros from proc handler converters
Replace the proc converter macros with "regular" functions. Though it
is more verbose than the macro version, it helps when debugging and
better aligns with coding-style.rst.
- General cleanup
Remove superfluous ctl_table forward declarations. Const qualify the
memory_allocation_profiling_sysctl and loadpin_sysctl_table arrays.
Add missing kernel doc to proc_dointvec_conv.
- Testing
This series was run through sysctl selftests/kunit test suite in
x86_64. And went into linux-next after rc4, giving it a good 3 weeks
of testing
* tag 'sysctl-7.00-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: replace SYSCTL_INT_CONV_CUSTOM macro with functions
sysctl: Replace unidirectional INT converter macros with functions
sysctl: Add kernel doc to proc_douintvec_conv
sysctl: Replace UINT converter macros with functions
sysctl: Add CONFIG_PROC_SYSCTL guards for converter macros
sysctl: clarify proc_douintvec_minmax doc
sysctl: Return -ENOSYS from proc_douintvec_conv when CONFIG_PROC_SYSCTL=n
sysctl: Remove unused ctl_table forward declarations
loadpin: Implement custom proc_handler for enforce
alloc_tag: move memory_allocation_profiling_sysctls into .rodata
sysctl: Add missing kernel-doc for proc_dointvec_conv
|
|
hppa-linux-gcc 9.5.0 generates a call to fsverity_readahead() in
f2fs_readahead() when CONFIG_FS_VERITY=n, because it fails to do the
expected dead code elimination based on vi always being NULL. Fix the
build error by adding an inline stub for fsverity_readahead(). Since
it's just for opportunistic readahead, just make it a no-op.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602180838.pwICdY2r-lkp@intel.com/
Fixes: 45dcb3ac9832 ("f2fs: consolidate fsverity_info lookup")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20260218012244.18536-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Now that fsverity_verify_page() has no callers, remove it.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20260218010630.7407-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Pull ceph updates from Ilya Dryomov:
"This adds support for the upcoming aes256k key type in CephX that is
based on Kerberos 5 and brings a bunch of assorted CephFS fixes from
Ethan and Sam. One of Sam's patches in particular undoes a change in
the fscrypt area that had an inadvertent side effect of making CephFS
behave as if mounted with wsize=4096 and leading to the corresponding
degradation in performance, especially for sequential writes"
* tag 'ceph-for-7.0-rc1' of https://github.com/ceph/ceph-client:
ceph: assert loop invariants in ceph_writepages_start()
ceph: remove error return from ceph_process_folio_batch()
ceph: fix write storm on fscrypted files
ceph: do not propagate page array emplacement errors as batch errors
ceph: supply snapshot context in ceph_uninline_data()
ceph: supply snapshot context in ceph_zero_partial_object()
libceph: adapt ceph_x_challenge_blob hashing and msgr1 message signing
libceph: add support for CEPH_CRYPTO_AES256KRB5
libceph: introduce ceph_crypto_key_prepare()
libceph: generalize ceph_x_encrypt_offset() and ceph_x_encrypt_buflen()
libceph: define and enforce CEPH_MAX_KEY_LEN
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- Add Frank Li as susbstem reviewer to help with reviews
New Support:
- Mediatek support for Dimensity 6300 and 9200 controller
- Qualcomm Kaanapali and Glymur GPI DMA engine
- Synopsis DW AXI Agilex5
- Renesas RZ/V2N SoC
- Atmel microchip lan9691-dma
- Tegra ADMA tegra264
Updates:
- sg_nents_for_dma() helper use in subsystem
- pm_runtime_mark_last_busy() redundant call update for subsystem
- Residue support for xilinx AXIDMA driver
- Intel Max SGL Size Support and capabilities for DSA3.0
- AXI dma larger than 32bits address support"
* tag 'dmaengine-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (64 commits)
dmaengine: add Frank Li as reviewer
dt-bindings: dma: qcom,gpi: Update max interrupts lines to 16
dmaengine: fsl-edma: don't explicitly disable clocks in .remove()
dmaengine: xilinx: xdma: use sg_nents_for_dma() helper
dmaengine: sh: use sg_nents_for_dma() helper
dmaengine: sa11x0: use sg_nents_for_dma() helper
dmaengine: qcom: bam_dma: use sg_nents_for_dma() helper
dmaengine: qcom: adm: use sg_nents_for_dma() helper
dmaengine: pxa-dma: use sg_nents_for_dma() helper
dmaengine: lgm: use sg_nents_for_dma() helper
dmaengine: k3dma: use sg_nents_for_dma() helper
dmaengine: dw-axi-dmac: use sg_nents_for_dma() helper
dmaengine: bcm2835-dma: use sg_nents_for_dma() helper
dmaengine: axi-dmac: use sg_nents_for_dma() helper
dmaengine: altera-msgdma: use sg_nents_for_dma() helper
scatterlist: introduce sg_nents_for_dma() helper
dmaengine: idxd: Add Max SGL Size Support for DSA3.0
dmaengine: idxd: Expose DSA3.0 capabilities through sysfs
dmaengine: sh: rz-dmac: Make channel irq local
dmaengine: pl08x: Fix comment stating the difference between PL080 and PL081
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"Core:
- Add suuport for "rx-polarity" and "tx-polarity" device tree
properties and phy common properties to manage this
New Support:
- Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy, USB UNI
PHY and SMB2370 eUSB2 repeater. SC8280xp QMP UFS PHY, Kaanapali
PCIe phy and QMP PHY, QCS615 QMP USB3+DP PHY and driver support for
that.
- SpacemiT PCIe/combo PHY and K1 USB2 PHY driver.
- HDMI 2.1 FRL configuration support and driver enabling for rockchip
samsung-hdptx driver
- TI TCAN1046 phy
- Renesas RZ/V2H(P) and RZ/V2N usb3
- Mediatek MT8188 hdmi-phy
- Google Tensor SoC USB PHY driver
- Apple Type-C PHY
Updates:
- Subsystem conversion for clock round_rate() to determine_rate()
- TI USB3 DT schema conversion
- Samsung ExynosAutov920 usb3, combo hsphy and ssphy support"
* tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (143 commits)
phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate()
dt-bindings: phy: ti,control-phy-otghs: convert to DT schema
dt-bindings: phy: ti,phy-usb3: convert to DT schema
phy: tegra: xusb: Remove unused powered_on variable
phy: renesas: rcar-gen3-usb2: add regulator dependency
phy: GOOGLE_USB: add TYPEC dependency
phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY
phy: renesas: rcar-gen3-usb2: Use mux-state for phyrst management
phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control
phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable()
phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic
dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC
dt-bindings: phy: renesas,usb2-phy: Document mux-states property
dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator
phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support
phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper
phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config
phy: rockchip: samsung-hdptx: Drop hw_rate driver data
phy: rockchip: samsung-hdptx: Compute clk rate from PLL config
phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- support for Qualcomm v2.2.0 controllers
- bus method updates for .probe(), .remove() and .shutdown()
and remove function return value updates
- Avell B.ON dmi-quirks mapping
- mark cs42l45 codec as wake capable
* tag 'soundwire-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: add SND_HDA_CORE dependency
dt-bindings: soundwire: qcom: Add SoundWire v2.2.0 compatible
soundwire: Use bus methods for .probe(), .remove() and .shutdown()
soundwire: Make remove function return no value
soundwire: dmi-quirks: add mapping for Avell B.ON (OEM rebranded of NUC15)
soundwire: qcom: Use guard to avoid mixing cleanup and goto
soundwire: intel_auxdevice: add cs42l45 codec to wake_capable_list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are two small changes that add some missing SPDX license lines to
some core kernel files. These are:
- adding SPDX license lines to kdb files
- adding SPDX license lines to the remaining kernel/ files
Both of these have been in linux-next for a while with no reported
issues"
* tag 'spdx-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
kernel: debug: Add SPDX license ids to kdb files
kernel: add SPDX-License-Identifier lines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver updates for
7.0-rc1. Overall more lines were removed than added, thanks to
dropping the obsolete isp1362 USB host controller driver, always a
nice change.
Other than that, nothing major happening here, highlights are:
- lots of dwc3 driver updates and new hardware support added
- usb gadget function driver updates
- usb phy driver updates
- typec driver updates and additions
- USB rust binding updates for syntax and formatting changes
- more usb serial device ids added
- other smaller USB core and driver updates and additions
All of these have been in linux-next for a long time, with no reported
problems"
* tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits)
usb: typec: ucsi: Add Thunderbolt alternate mode support
usb: typec: hd3ss3220: Check if regulator needs to be switched
usb: phy: tegra: parametrize PORTSC1 register offset
usb: phy: tegra: parametrize HSIC PTS value
usb: phy: tegra: return error value from utmi_wait_register
usb: phy: tegra: cosmetic fixes
dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support
usb: dwc2: fix resume failure if dr_mode is host
usb: cdns3: fix role switching during resume
usb: dwc3: gadget: Move vbus draw to workqueue context
USB: serial: option: add Telit FN920C04 RNDIS compositions
usb: dwc3: Log dwc3 address in traces
usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN
usb: phy: tegra: add HSIC support
usb: phy: tegra: use phy type directly
usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi
usb: typec: ucsi: Support mode selection to activate altmodes
usb: typec: Introduce mode_selection bit
usb: typec: Implement mode selection
usb: typec: Expose alternate mode priority via sysfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the small amount of tty and serial driver updates for 7.0-rc1.
Nothing major in here at all, just some driver updates and minor
tweaks and cleanups including:
- sh-sci serial driver updates
- 8250 driver updates
- attempt to make the tty ports have their own workqueue, but was
reverted after testing found it to have problems on some platforms.
This will probably come back for 7.1 after it has been reworked and
resubmitted
- other tiny tty driver changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits)
Revert "tty: tty_port: add workqueue to flip TTY buffer"
tty: tty_port: add workqueue to flip TTY buffer
serial: 8250_pci: Remove custom deprecated baud setting routine
serial: 8250_omap: Remove custom deprecated baud setting routine
dt-bindings: serial: renesas,scif: Document RZ/G3L SoC
serial: 8250: omap: set out-of-band wakeup if wakeup pinctrl exists
tty: hvc-iucv: Remove KMSG_COMPONENT macro
dt-bindings: serial: google,goldfish-tty: Convert to DT schema
dt-bindings: serial: sh-sci: Fold single-entry compatibles into enum
serial: 8250: 8250_omap.c: Clear DMA RX running status only after DMA termination is done
serial: 8250: 8250_omap.c: Add support for handling UART error conditions
serial: SH_SCI: improve "DMA support" prompt
serial: Kconfig: fix ordering of entries for menu display
serial: 8250: fix ordering of entries for menu display
serial: imx: change SERIAL_IMX_CONSOLE to bool
8250_men_mcb: drop unneeded MODULE_ALIAS
serial: men_z135_uart: drop unneeded MODULE_ALIAS
dt-bindings: serial: renesas,rsci: Document RZ/V2H(P) and RZ/V2N SoCs
serial: rsci: Convert to FIELD_MODIFY()
dt-bindings: serial: 8250: add SpacemiT K3 UART compatible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystem changes for 7.0-rc1. Lots of little things in here,
including:
- Loads of iio driver changes and updates and additions
- gpib driver updates
- interconnect driver updates
- i3c driver updates
- hwtracing (coresight and intel) driver updates
- deletion of the obsolete mwave driver
- binder driver updates (rust and c versions)
- mhi driver updates (causing a merge conflict, see below)
- mei driver updates
- fsi driver updates
- eeprom driver updates
- lots of other small char and misc driver updates and cleanups
All of these have been in linux-next for a while, with no reported
issues"
* tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits)
mux: mmio: fix regmap leak on probe failure
rust_binder: return p from rust_binder_transaction_target_node()
drivers: android: binder: Update ARef imports from sync::aref
rust_binder: fix needless borrow in context.rs
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull more block updates from Jens Axboe:
- Fix partial IOVA mapping cleanup in error handling
- Minor prep series ignoring discard return value, as
the inline value is always known
- Ensure BLK_FEAT_STABLE_WRITES is set for drbd
- Fix leak of folio in bio_iov_iter_bounce_read()
- Allow IOC_PR_READ_* for read-only open
- Another debugfs deadlock fix
- A few doc updates
* tag 'block-7.0-20260216' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
blk-mq: use NOIO context to prevent deadlock during debugfs creation
blk-stat: convert struct blk_stat_callback to kernel-doc
block: fix enum descriptions kernel-doc
block: update docs for bio and bvec_iter
block: change return type to void
nvmet: ignore discard return value
md: ignore discard return value
block: fix partial IOVA mapping cleanup in blk_rq_dma_map_iova
block: fix folio leak in bio_iov_iter_bounce_read()
block: allow IOC_PR_READ_* ioctls with BLK_OPEN_READ
drbd: always set BLK_FEAT_STABLE_WRITES
|
