summaryrefslogtreecommitdiff
path: root/include/net
AgeCommit message (Collapse)Author
2023-11-28net: sched: do not offload flows with a helper in act_ctXin Long
[ Upstream commit 7cd5af0e937a197295f3aa3721031f0fbae49cff ] There is no hardware supporting ct helper offload. However, prior to this patch, a flower filter with a helper in the ct action can be successfully set into the HW, for example (eth1 is a bnxt NIC): # tc qdisc add dev eth1 ingress_block 22 ingress # tc filter add block 22 proto ip flower skip_sw ip_proto tcp \ dst_port 21 ct_state -trk action ct helper ipv4-tcp-ftp # tc filter show dev eth1 ingress filter block 22 protocol ip pref 49152 flower chain 0 handle 0x1 eth_type ipv4 ip_proto tcp dst_port 21 ct_state -trk skip_sw in_hw in_hw_count 1 <---- action order 1: ct zone 0 helper ipv4-tcp-ftp pipe index 2 ref 1 bind 1 used_hw_stats delayed This might cause the flower filter not to work as expected in the HW. This patch avoids this problem by simply returning -EOPNOTSUPP in tcf_ct_offload_act_setup() to not allow to offload flows with a helper in act_ct. Fixes: a21b06e73191 ("net: sched: add helper support in act_ct") Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/f8685ec7702c4a448a1371a8b34b43217b583b9d.1699898008.git.lucien.xin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28netfilter: nf_tables: fix pointer math issue in nft_byteorder_eval()Dan Carpenter
[ Upstream commit c301f0981fdd3fd1ffac6836b423c4d7a8e0eb63 ] The problem is in nft_byteorder_eval() where we are iterating through a loop and writing to dst[0], dst[1], dst[2] and so on... On each iteration we are writing 8 bytes. But dst[] is an array of u32 so each element only has space for 4 bytes. That means that every iteration overwrites part of the previous element. I spotted this bug while reviewing commit caf3ef7468f7 ("netfilter: nf_tables: prevent OOB access in nft_byteorder_eval") which is a related issue. I think that the reason we have not detected this bug in testing is that most of time we only write one element. Fixes: ce1e7989d989 ("netfilter: nft_byteorder: provide 64bit le/be conversion") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28net: annotate data-races around sk->sk_dst_pending_confirmEric Dumazet
[ Upstream commit eb44ad4e635132754bfbcb18103f1dcb7058aedd ] This field can be read or written without socket lock being held. Add annotations to avoid load-store tearing. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28net: annotate data-races around sk->sk_tx_queue_mappingEric Dumazet
[ Upstream commit 0bb4d124d34044179b42a769a0c76f389ae973b6 ] This field can be read or written without socket lock being held. Add annotations to avoid load-store tearing. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20net/sched: act_ct: Always fill offloading tuple iifidxVlad Buslov
[ Upstream commit 9bc64bd0cd765f696fcd40fc98909b1f7c73b2ba ] Referenced commit doesn't always set iifidx when offloading the flow to hardware. Fix the following cases: - nf_conn_act_ct_ext_fill() is called before extension is created with nf_conn_act_ct_ext_add() in tcf_ct_act(). This can cause rule offload with unspecified iifidx when connection is offloaded after only single original-direction packet has been processed by tc data path. Always fill the new nf_conn_act_ct_ext instance after creating it in nf_conn_act_ct_ext_add(). - Offloading of unidirectional UDP NEW connections is now supported, but ct flow iifidx field is not updated when connection is promoted to bidirectional which can result reply-direction iifidx to be zero when refreshing the connection. Fill in the extension and update flow iifidx before calling flow_offload_refresh(). Fixes: 9795ded7f924 ("net/sched: act_ct: Fill offloading tuple iifidx") Reviewed-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 6a9bad0069cf ("net/sched: act_ct: offload UDP NEW connections") Link: https://lore.kernel.org/r/20231103151410.764271-1-vladbu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20inet: shrink struct flowi_commonEric Dumazet
[ Upstream commit 1726483b79a72e0150734d5367e4a0238bf8fcff ] I am looking at syzbot reports triggering kernel stack overflows involving a cascade of ipvlan devices. We can save 8 bytes in struct flowi_common. This patch alone will not fix the issue, but is a start. Fixes: 24ba14406c5c ("route: Add multipath_hash in flowi_common to make user-define hash") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: wenxu <wenxu@ucloud.cn> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20231025141037.3448203-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20Bluetooth: Make handle of hci_conn be uniqueZiyang Xuan
[ Upstream commit 181a42edddf51d5d9697ecdf365d72ebeab5afb0 ] The handle of new hci_conn is always HCI_CONN_HANDLE_MAX + 1 if the handle of the first hci_conn entry in hci_dev->conn_hash->list is not HCI_CONN_HANDLE_MAX + 1. Use ida to manage the allocation of hci_conn->handle to make it be unique. Fixes: 9f78191cc9f1 ("Bluetooth: hci_conn: Always allocate unique handles") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20Bluetooth: ISO: Pass BIG encryption info through QoSIulia Tanasescu
[ Upstream commit 1d11d70d1f6b23e7d3fc00396c17b90b876162a4 ] This enables a broadcast sink to be informed if the PA it has synced with is associated with an encrypted BIG, by retrieving the socket QoS and checking the encryption field. After PA sync has been successfully established and the first BIGInfo advertising report is received, a new hcon is added and notified to the ISO layer. The ISO layer sets the encryption field of the socket and hcon QoS according to the encryption parameter of the BIGInfo advertising report event. After that, the userspace is woken up, and the QoS of the new PA sync socket can be read, to inspect the encryption field and follow up accordingly. Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: 181a42edddf5 ("Bluetooth: Make handle of hci_conn be unique") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20Bluetooth: ISO: Use defer setup to separate PA sync and BIG syncIulia Tanasescu
[ Upstream commit fbdc4bc47268953c80853489f696e02d61f9a2c6 ] This commit implements defer setup support for the Broadcast Sink scenario: By setting defer setup on a broadcast socket before calling listen, the user is able to trigger the PA sync and BIG sync procedures separately. This is useful if the user first wants to synchronize to the periodic advertising transmitted by a Broadcast Source, and trigger the BIG sync procedure later on. If defer setup is set, once a PA sync established event arrives, a new hcon is created and notified to the ISO layer. A child socket associated with the PA sync connection will be added to the accept queue of the listening socket. Once the accept call returns the fd for the PA sync child socket, the user should call read on that fd. This will trigger the BIG create sync procedure, and the PA sync socket will become a listening socket itself. When the BIG sync established event is notified to the ISO layer, the bis connections will be added to the accept queue of the PA sync parent. The user should call accept on the PA sync socket to get the final bis connections. Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: 181a42edddf5 ("Bluetooth: Make handle of hci_conn be unique") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20tcp: fix cookie_init_timestamp() overflowsEric Dumazet
[ Upstream commit 73ed8e03388d16c12fc577e5c700b58a29045a15 ] cookie_init_timestamp() is supposed to return a 64bit timestamp suitable for both TSval determination and setting of skb->tstamp. Unfortunately it uses 32bit fields and overflows after 2^32 * 10^6 nsec (~49 days) of uptime. Generated TSval are still correct, but skb->tstamp might be set far away in the past, potentially confusing other layers. tcp_ns_to_ts() is changed to return a full 64bit value, ts and ts_now variables are changed to u64 type, and TSMASK is removed in favor of shifts operations. While we are at it, change this sequence: ts >>= TSBITS; ts--; ts <<= TSBITS; ts |= options; to: ts -= (1UL << TSBITS); Fixes: 9a568de4818d ("tcp: switch TCP TS option (RFC 7323) to 1ms clock") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20udplite: fix various data-racesEric Dumazet
[ Upstream commit 882af43a0fc37e26d85fb0df0c9edd3bed928de4 ] udp->pcflag, udp->pcslen and udp->pcrlen reads/writes are racy. Move udp->pcflag to udp->udp_flags for atomicity, and add READ_ONCE()/WRITE_ONCE() annotations for pcslen and pcrlen. Fixes: ba4e58eca8aa ("[NET]: Supporting UDP-Lite (RFC 3828) in Linux") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20udp: lockless UDP_ENCAP_L2TPINUDP / UDP_GROEric Dumazet
[ Upstream commit ac9a7f4ce5dda1472e8f44096f33066c6ec1a3b4 ] Move udp->encap_enabled to udp->udp_flags. Add udp_test_and_set_bit() helper to allow lockless udp_tunnel_encap_enable() implementation. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: 70a36f571362 ("udp: annotate data-races around udp->encap_type") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20wifi: cfg80211: fix kernel-doc for wiphy_delayed_work_flush()Johannes Berg
[ Upstream commit 8c73d5248dcf112611654bcd32352dc330b02397 ] Clearly, there's no space in the function name, not sure how that could've happened. Put the underscore that it should be. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 56cfb8ce1f7f ("wifi: cfg80211: add flush functions for wiphy work") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20wifi: cfg80211: add flush functions for wiphy workJohannes Berg
[ Upstream commit 56cfb8ce1f7f6c4e5ca571a2ec0880e131cd0311 ] There may be sometimes reasons to actually run the work if it's pending, add flush functions for both regular and delayed wiphy work that will do this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Stable-dep-of: eadfb54756ae ("wifi: mac80211: move sched-scan stop work to wiphy work") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-02netfilter: flowtable: GC pushes back packets to classic pathPablo Neira Ayuso
[ Upstream commit 735795f68b37e9bb49f642407a0d49b1631ea1c7 ] Since 41f2c7c342d3 ("net/sched: act_ct: Fix promotion of offloaded unreplied tuple"), flowtable GC pushes back flows with IPS_SEEN_REPLY back to classic path in every run, ie. every second. This is because of a new check for NF_FLOW_HW_ESTABLISHED which is specific of sched/act_ct. In Netfilter's flowtable case, NF_FLOW_HW_ESTABLISHED never gets set on and IPS_SEEN_REPLY is unreliable since users decide when to offload the flow before, such bit might be set on at a later stage. Fix it by adding a custom .gc handler that sched/act_ct can use to deal with its NF_FLOW_HW_ESTABLISHED bit. Fixes: 41f2c7c342d3 ("net/sched: act_ct: Fix promotion of offloaded unreplied tuple") Reported-by: Vladimir Smelhaus <vl.sm@email.cz> Reviewed-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25Bluetooth: hci_sock: Correctly bounds check and pad HCI_MON_NEW_INDEX nameKees Cook
commit cb3871b1cd135a6662b732fbc6b3db4afcdb4a64 upstream. The code pattern of memcpy(dst, src, strlen(src)) is almost always wrong. In this case it is wrong because it leaves memory uninitialized if it is less than sizeof(ni->name), and overflows ni->name when longer. Normally strtomem_pad() could be used here, but since ni->name is a trailing array in struct hci_mon_new_index, compilers that don't support -fstrict-flex-arrays=3 can't tell how large this array is via __builtin_object_size(). Instead, open-code the helper and use sizeof() since it will work correctly. Additionally mark ni->name as __nonstring since it appears to not be a %NUL terminated C string. Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Edward AD <twuufnxlz@gmail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-bluetooth@vger.kernel.org Cc: netdev@vger.kernel.org Fixes: 18f547f3fc07 ("Bluetooth: hci_sock: fix slab oob read in create_monitor_event") Link: https://lore.kernel.org/lkml/202310110908.F2639D3276@keescook/ Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25tcp: allow again tcp_disconnect() when threads are waitingPaolo Abeni
[ Upstream commit 419ce133ab928ab5efd7b50b2ef36ddfd4eadbd2 ] As reported by Tom, .NET and applications build on top of it rely on connect(AF_UNSPEC) to async cancel pending I/O operations on TCP socket. The blamed commit below caused a regression, as such cancellation can now fail. As suggested by Eric, this change addresses the problem explicitly causing blocking I/O operation to terminate immediately (with an error) when a concurrent disconnect() is executed. Instead of tracking the number of threads blocked on a given socket, track the number of disconnect() issued on such socket. If such counter changes after a blocking operation releasing and re-acquiring the socket lock, error out the current operation. Fixes: 4faeee0cf8a5 ("tcp: deny tcp_disconnect() when threads are waiting") Reported-by: Tom Deseyn <tdeseyn@redhat.com> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1886305 Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/f3b95e47e3dbed840960548aebaa8d954372db41.1697008693.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25Bluetooth: hci_sync: Introduce PTR_UINT/UINT_PTR macrosLuiz Augusto von Dentz
[ Upstream commit a1f6c3aef13c9e7f8d459bd464e9e34da1342c0c ] This introduces PTR_UINT/UINT_PTR macros and replace the use of PTR_ERR/ERR_PTR. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: acab8ff29a2a ("Bluetooth: ISO: Fix invalid context error") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25ipv4/fib: send notify when delete source address routesHangbin Liu
[ Upstream commit 4b2b606075e50cdae62ab2356b0a1e206947c354 ] After deleting an interface address in fib_del_ifaddr(), the function scans the fib_info list for stray entries and calls fib_flush() and fib_table_flush(). Then the stray entries will be deleted silently and no RTM_DELROUTE notification will be sent. This lack of notification can make routing daemons, or monitor like `ip monitor route` miss the routing changes. e.g. + ip link add dummy1 type dummy + ip link add dummy2 type dummy + ip link set dummy1 up + ip link set dummy2 up + ip addr add 192.168.5.5/24 dev dummy1 + ip route add 7.7.7.0/24 dev dummy2 src 192.168.5.5 + ip -4 route 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 + ip monitor route + ip addr del 192.168.5.5/24 dev dummy1 Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5 Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5 As Ido reminded, fib_table_flush() isn't only called when an address is deleted, but also when an interface is deleted or put down. The lack of notification in these cases is deliberate. And commit 7c6bb7d2faaf ("net/ipv6: Add knob to skip DELROUTE message on device down") introduced a sysctl to make IPv6 behave like IPv4 in this regard. So we can't send the route delete notify blindly in fib_table_flush(). To fix this issue, let's add a new flag in "struct fib_info" to track the deleted prefer source address routes, and only send notify for them. After update: + ip monitor route + ip addr del 192.168.5.5/24 dev dummy1 Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5 Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5 Deleted 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5 Suggested-by: Thomas Haller <thaller@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230922075508.848925-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25Bluetooth: hci_core: Fix build warningsLuiz Augusto von Dentz
[ Upstream commit dcda165706b9fbfd685898d46a6749d7d397e0c0 ] This fixes the following warnings: net/bluetooth/hci_core.c: In function ‘hci_register_dev’: net/bluetooth/hci_core.c:2620:54: warning: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 5 [-Wformat-truncation=] 2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id); | ^~ net/bluetooth/hci_core.c:2620:50: note: directive argument in the range [0, 2147483647] 2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id); | ^~~~~~~ net/bluetooth/hci_core.c:2620:9: note: ‘snprintf’ output between 5 and 14 bytes into a destination of size 8 2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25tcp: fix excessive TLP and RACK timeouts from HZ roundingNeal Cardwell
commit 1c2709cfff1dedbb9591e989e2f001484208d914 upstream. We discovered from packet traces of slow loss recovery on kernels with the default HZ=250 setting (and min_rtt < 1ms) that after reordering, when receiving a SACKed sequence range, the RACK reordering timer was firing after about 16ms rather than the desired value of roughly min_rtt/4 + 2ms. The problem is largely due to the RACK reorder timer calculation adding in TCP_TIMEOUT_MIN, which is 2 jiffies. On kernels with HZ=250, this is 2*4ms = 8ms. The TLP timer calculation has the exact same issue. This commit fixes the TLP transmit timer and RACK reordering timer floor calculation to more closely match the intended 2ms floor even on kernels with HZ=250. It does this by adding in a new TCP_TIMEOUT_MIN_US floor of 2000 us and then converting to jiffies, instead of the current approach of converting to jiffies and then adding th TCP_TIMEOUT_MIN value of 2 jiffies. Our testing has verified that on kernels with HZ=1000, as expected, this does not produce significant changes in behavior, but on kernels with the default HZ=250 the latency improvement can be large. For example, our tests show that for HZ=250 kernels at low RTTs this fix roughly halves the latency for the RACK reorder timer: instead of mostly firing at 16ms it mostly fires at 8ms. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Fixes: bb4d991a28cc ("tcp: adjust tail loss probe timeout") Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20231015174700.2206872-1-ncardwell.sw@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25xfrm: fix a data-race in xfrm_gen_index()Eric Dumazet
commit 3e4bc23926b83c3c67e5f61ae8571602754131a6 upstream. xfrm_gen_index() mutual exclusion uses net->xfrm.xfrm_policy_lock. This means we must use a per-netns idx_generator variable, instead of a static one. Alternative would be to use an atomic variable. syzbot reported: BUG: KCSAN: data-race in xfrm_sk_policy_insert / xfrm_sk_policy_insert write to 0xffffffff87005938 of 4 bytes by task 29466 on cpu 0: xfrm_gen_index net/xfrm/xfrm_policy.c:1385 [inline] xfrm_sk_policy_insert+0x262/0x640 net/xfrm/xfrm_policy.c:2347 xfrm_user_policy+0x413/0x540 net/xfrm/xfrm_state.c:2639 do_ipv6_setsockopt+0x1317/0x2ce0 net/ipv6/ipv6_sockglue.c:943 ipv6_setsockopt+0x57/0x130 net/ipv6/ipv6_sockglue.c:1012 rawv6_setsockopt+0x21e/0x410 net/ipv6/raw.c:1054 sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697 __sys_setsockopt+0x1c9/0x230 net/socket.c:2263 __do_sys_setsockopt net/socket.c:2274 [inline] __se_sys_setsockopt net/socket.c:2271 [inline] __x64_sys_setsockopt+0x66/0x80 net/socket.c:2271 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffffffff87005938 of 4 bytes by task 29460 on cpu 1: xfrm_sk_policy_insert+0x13e/0x640 xfrm_user_policy+0x413/0x540 net/xfrm/xfrm_state.c:2639 do_ipv6_setsockopt+0x1317/0x2ce0 net/ipv6/ipv6_sockglue.c:943 ipv6_setsockopt+0x57/0x130 net/ipv6/ipv6_sockglue.c:1012 rawv6_setsockopt+0x21e/0x410 net/ipv6/raw.c:1054 sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697 __sys_setsockopt+0x1c9/0x230 net/socket.c:2263 __do_sys_setsockopt net/socket.c:2274 [inline] __se_sys_setsockopt net/socket.c:2271 [inline] __x64_sys_setsockopt+0x66/0x80 net/socket.c:2271 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00006ad8 -> 0x00006b18 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 29460 Comm: syz-executor.1 Not tainted 6.5.0-rc5-syzkaller-00243-g9106536c1aa3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 Fixes: 1121994c803f ("netns xfrm: policy insertion in netns") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25Bluetooth: hci_conn: Fix modifying handle while abortingLuiz Augusto von Dentz
commit 16e3b6429159795a87add7584eb100b19aa1d70b upstream. This introduces hci_conn_set_handle which takes care of verifying the conditions where the hci_conn handle can be modified, including when hci_conn_abort has been called and also checks that the handles is valid as well. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-19net: macsec: indicate next pn update when offloadingRadu Pirea (NXP OSS)
[ Upstream commit 0412cc846a1ef38697c3f321f9b174da91ecd3b5 ] Indicate next PN update using update_pn flag in macsec_context. Offloaded MACsec implementations does not know whether or not the MACSEC_SA_ATTR_PN attribute was passed for an SA update and assume that next PN should always updated, but this is not always true. The PN can be reset to its initial value using the following command: $ ip macsec set macsec0 tx sa 0 off #octeontx2-pf case Or, the update PN command will succeed even if the driver does not support PN updates. $ ip macsec set macsec0 tx sa 0 pn 1 on #mscc phy driver case Comparing the initial PN with the new PN value is not a solution. When the user updates the PN using its initial value the command will succeed, even if the driver does not support it. Like this: $ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \ ead3664f508eb06c40ac7104cdae4ce5 $ ip macsec set macsec0 tx sa 0 pn 1 on #mlx5 case Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: e0a8c918daa5 ("net: phy: mscc: macsec: reject PN update requests") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10net: mana: Fix oversized sge0 for GSO packetsHaiyang Zhang
[ Upstream commit a43e8e9ffa0d1de058964edf1a0622cbb7e27cfe ] Handle the case when GSO SKB linear length is too large. MANA NIC requires GSO packets to put only the header part to SGE0, otherwise the TX queue may stop at the HW level. So, use 2 SGEs for the skb linear part which contains more than the packet header. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10tcp: fix quick-ack counting to count actual ACKs of new dataNeal Cardwell
[ Upstream commit 059217c18be6757b95bfd77ba53fb50b48b8a816 ] This commit fixes quick-ack counting so that it only considers that a quick-ack has been provided if we are sending an ACK that newly acknowledges data. The code was erroneously using the number of data segments in outgoing skbs when deciding how many quick-ack credits to remove. This logic does not make sense, and could cause poor performance in request-response workloads, like RPC traffic, where requests or responses can be multi-segment skbs. When a TCP connection decides to send N quick-acks, that is to accelerate the cwnd growth of the congestion control module controlling the remote endpoint of the TCP connection. That quick-ack decision is purely about the incoming data and outgoing ACKs. It has nothing to do with the outgoing data or the size of outgoing data. And in particular, an ACK only serves the intended purpose of allowing the remote congestion control to grow the congestion window quickly if the ACK is ACKing or SACKing new data. The fix is simple: only count packets as serving the goal of the quickack mechanism if they are ACKing/SACKing new data. We can tell whether this is the case by checking inet_csk_ack_scheduled(), since we schedule an ACK exactly when we are ACKing/SACKing new data. Fixes: fc6415bcb0f5 ("[TCP]: Fix quick-ack decrementing with TSO.") Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20231001151239.1866845-1-ncardwell.sw@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10neighbour: fix data-races around n->outputEric Dumazet
[ Upstream commit 5baa0433a15eadd729625004c37463acb982eca7 ] n->output field can be read locklessly, while a writer might change the pointer concurrently. Add missing annotations to prevent load-store tearing. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10wifi: cfg80211: add missing kernel-doc for cqm_rssi_workJohannes Berg
[ Upstream commit d1383077c225ceb87ac7a3b56b2c505193f77ed7 ] As reported by Stephen, I neglected to add the kernel-doc for the new struct member. Fix that. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 37c20b2effe9 ("wifi: cfg80211: fix cqm_config access race") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10wifi: cfg80211: fix cqm_config access raceJohannes Berg
[ Upstream commit 37c20b2effe987b806c8de6d12978e4ffeff026f ] Max Schulze reports crashes with brcmfmac. The reason seems to be a race between userspace removing the CQM config and the driver calling cfg80211_cqm_rssi_notify(), where if the data is freed while cfg80211_cqm_rssi_notify() runs it will crash since it assumes wdev->cqm_config is set. This can't be fixed with a simple non-NULL check since there's nothing we can do for locking easily, so use RCU instead to protect the pointer, but that requires pulling the updates out into an asynchronous worker so they can sleep and call back into the driver. Since we need to change the free anyway, also change it to go back to the old settings if changing the settings fails. Reported-and-tested-by: Max Schulze <max.schulze@online.de> Closes: https://lore.kernel.org/r/ac96309a-8d8d-4435-36e6-6d152eb31876@online.de Fixes: 4a4b8169501b ("cfg80211: Accept multiple RSSI thresholds for CQM") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10wifi: cfg80211/mac80211: hold link BSSes when assoc fails for MLO connectionWen Gong
[ Upstream commit 234249d88b091d006b82f8d570343aae5f383736 ] When connect to MLO AP with more than one link, and the assoc response of AP is not success, then cfg80211_unhold_bss() is not called for all the links' cfg80211_bss except the primary link which means the link used by the latest successful association request. Thus the hold value of the cfg80211_bss is not reset to 0 after the assoc fail, and then the __cfg80211_unlink_bss() will not be called for the cfg80211_bss by __cfg80211_bss_expire(). Then the AP always looks exist even the AP is shutdown or reconfigured to another type, then it will lead error while connecting it again. The detail info are as below. When connect with muti-links AP, cfg80211_hold_bss() is called by cfg80211_mlme_assoc() for each cfg80211_bss of all the links. When assoc response from AP is not success(such as status_code==1), the ieee80211_link_data of non-primary link(sdata->link[link_id]) is NULL because ieee80211_assoc_success()->ieee80211_vif_update_links() is not called for the links. Then struct cfg80211_rx_assoc_resp resp in cfg80211_rx_assoc_resp() and struct cfg80211_connect_resp_params cr in __cfg80211_connect_result() will only have the data of the primary link, and finally function cfg80211_connect_result_release_bsses() only call cfg80211_unhold_bss() for the primary link. Then cfg80211_bss of the other links will never free because its hold is always > 0 now. Hence assign value for the bss and status from assoc_data since it is valid for this case. Also assign value of addr from assoc_data when the link is NULL because the addrs of assoc_data and link both represent the local link addr and they are same value for success connection. Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Link: https://lore.kernel.org/r/20230825070055.28164-1-quic_wgong@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06netfilter: nf_tables: fix memleak when more than 255 elements expiredFlorian Westphal
commit cf5000a7787cbc10341091d37245a42c119d26c5 upstream. When more than 255 elements expired we're supposed to switch to a new gc container structure. This never happens: u8 type will wrap before reaching the boundary and nft_trans_gc_space() always returns true. This means we recycle the initial gc container structure and lose track of the elements that came before. While at it, don't deref 'gc' after we've passed it to call_rcu. Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Reported-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06netfilter: nft_set_pipapo: call nft_trans_gc_queue_sync() in catchall GCPablo Neira Ayuso
commit 4a9e12ea7e70223555ec010bec9f711089ce96f6 upstream. pipapo needs to enqueue GC transactions for catchall elements through nft_trans_gc_queue_sync(). Add nft_trans_gc_catchall_sync() and nft_trans_gc_catchall_async() to handle GC transaction queueing accordingly. Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19tcp: Fix bind() regression for v4-mapped-v6 wildcard address.Kuniyuki Iwashima
[ Upstream commit aa99e5f87bd54db55dd37cb130bd5eb55933027f ] Andrei Vagin reported bind() regression with strace logs. If we bind() a TCPv6 socket to ::FFFF:0.0.0.0 and then bind() a TCPv4 socket to 127.0.0.1, the 2nd bind() should fail but now succeeds. from socket import * s1 = socket(AF_INET6, SOCK_STREAM) s1.bind(('::ffff:0.0.0.0', 0)) s2 = socket(AF_INET, SOCK_STREAM) s2.bind(('127.0.0.1', s1.getsockname()[1])) During the 2nd bind(), if tb->family is AF_INET6 and sk->sk_family is AF_INET in inet_bind2_bucket_match_addr_any(), we still need to check if tb has the v4-mapped-v6 wildcard address. The example above does not work after commit 5456262d2baa ("net: Fix incorrect address comparison when searching for a bind2 bucket"), but the blamed change is not the commit. Before the commit, the leading zeros of ::FFFF:0.0.0.0 were treated as 0.0.0.0, and the sequence above worked by chance. Technically, this case has been broken since bhash2 was introduced. Note that if we bind() two sockets to 127.0.0.1 and then ::FFFF:0.0.0.0, the 2nd bind() fails properly because we fall back to using bhash to detect conflicts for the v4-mapped-v6 address. Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address") Reported-by: Andrei Vagin <avagin@google.com> Closes: https://lore.kernel.org/netdev/ZPuYBOFC8zsK6r9T@google.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19ipv6: fix ip6_sock_set_addr_preferences() typoEric Dumazet
[ Upstream commit 8cdd9f1aaedf823006449faa4e540026c692ac43 ] ip6_sock_set_addr_preferences() second argument should be an integer. SUNRPC attempts to set IPV6_PREFER_SRC_PUBLIC were translated to IPV6_PREFER_SRC_TMP Fixes: 18d5ad623275 ("ipv6: add ip6_sock_set_addr_preferences") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230911154213.713941-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19ip_tunnels: use DEV_STATS_INC()Eric Dumazet
[ Upstream commit 9b271ebaf9a2c5c566a54bc6cd915962e8241130 ] syzbot/KCSAN reported data-races in iptunnel_xmit_stats() [1] This can run from multiple cpus without mutual exclusion. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. [1] BUG: KCSAN: data-race in iptunnel_xmit / iptunnel_xmit read-write to 0xffff8881353df170 of 8 bytes by task 30263 on cpu 1: iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline] iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87 ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662 __netdev_start_xmit include/linux/netdevice.h:4889 [inline] netdev_start_xmit include/linux/netdevice.h:4903 [inline] xmit_one net/core/dev.c:3544 [inline] dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560 __dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340 dev_queue_xmit include/linux/netdevice.h:3082 [inline] __bpf_tx_skb net/core/filter.c:2129 [inline] __bpf_redirect_no_mac net/core/filter.c:2159 [inline] __bpf_redirect+0x723/0x9c0 net/core/filter.c:2182 ____bpf_clone_redirect net/core/filter.c:2453 [inline] bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425 ___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954 __bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195 bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline] __bpf_prog_run include/linux/filter.h:609 [inline] bpf_prog_run include/linux/filter.h:616 [inline] bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423 bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045 bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996 __sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353 __do_sys_bpf kernel/bpf/syscall.c:5439 [inline] __se_sys_bpf kernel/bpf/syscall.c:5437 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read-write to 0xffff8881353df170 of 8 bytes by task 30249 on cpu 0: iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline] iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87 ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662 __netdev_start_xmit include/linux/netdevice.h:4889 [inline] netdev_start_xmit include/linux/netdevice.h:4903 [inline] xmit_one net/core/dev.c:3544 [inline] dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560 __dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340 dev_queue_xmit include/linux/netdevice.h:3082 [inline] __bpf_tx_skb net/core/filter.c:2129 [inline] __bpf_redirect_no_mac net/core/filter.c:2159 [inline] __bpf_redirect+0x723/0x9c0 net/core/filter.c:2182 ____bpf_clone_redirect net/core/filter.c:2453 [inline] bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425 ___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954 __bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195 bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline] __bpf_prog_run include/linux/filter.h:609 [inline] bpf_prog_run include/linux/filter.h:616 [inline] bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423 bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045 bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996 __sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353 __do_sys_bpf kernel/bpf/syscall.c:5439 [inline] __se_sys_bpf kernel/bpf/syscall.c:5437 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x0000000000018830 -> 0x0000000000018831 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 30249 Comm: syz-executor.4 Not tainted 6.5.0-syzkaller-11704-g3f86ed6ec0b3 #0 Fixes: 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19af_unix: Fix msg_controllen test in scm_pidfd_recv() for MSG_CMSG_COMPAT.Kuniyuki Iwashima
[ Upstream commit 718e6b51298e0f254baca0d40ab52a00e004e014 ] Heiko Carstens reported that SCM_PIDFD does not work with MSG_CMSG_COMPAT because scm_pidfd_recv() always checks msg_controllen against sizeof(struct cmsghdr). We need to use sizeof(struct compat_cmsghdr) for the compat case. Fixes: 5e2ff6704a27 ("scm: add SO_PASSPIDFD and SCM_PIDFD") Reported-by: Heiko Carstens <hca@linux.ibm.com> Closes: https://lore.kernel.org/netdev/20230901200517.8742-A-hca@linux.ibm.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Tested-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19ipv4: ignore dst hint for multipath routesSriram Yagnaraman
[ Upstream commit 6ac66cb03ae306c2e288a9be18226310529f5b25 ] Route hints when the nexthop is part of a multipath group causes packets in the same receive batch to be sent to the same nexthop irrespective of the multipath hash of the packet. So, do not extract route hint for packets whose destination is part of a multipath group. A new SKB flag IPSKB_MULTIPATH is introduced for this purpose, set the flag when route is looked up in ip_mkroute_input() and use it in ip_extract_route_hint() to check for the existence of the flag. Fixes: 02b24941619f ("ipv4: use dst hint for ipv4 list receive") Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19net: annotate data-races around sk->sk_tsflagsEric Dumazet
[ Upstream commit e3390b30a5dfb112e8e802a59c0f68f947b638b2 ] sk->sk_tsflags can be read locklessly, add corresponding annotations. Fixes: b9f40e21ef42 ("net-timestamp: move timestamp flags out of sk_flags") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19net: annotate data-races around sk->sk_forward_allocEric Dumazet
[ Upstream commit 5e6300e7b3a4ab5b72a82079753868e91fbf9efc ] Every time sk->sk_forward_alloc is read locklessly, add a READ_ONCE(). Add sk_forward_alloc_add() helper to centralize updates, to reduce number of WRITE_ONCE(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19net: fib: avoid warn splat in flow dissectorFlorian Westphal
[ Upstream commit 8aae7625ff3f0bd5484d01f1b8d5af82e44bec2d ] New skbs allocated via nf_send_reset() have skb->dev == NULL. fib*_rules_early_flow_dissect helpers already have a 'struct net' argument but its not passed down to the flow dissector core, which will then WARN as it can't derive a net namespace to use: WARNING: CPU: 0 PID: 0 at net/core/flow_dissector.c:1016 __skb_flow_dissect+0xa91/0x1cd0 [..] ip_route_me_harder+0x143/0x330 nf_send_reset+0x17c/0x2d0 [nf_reject_ipv4] nft_reject_inet_eval+0xa9/0xf2 [nft_reject_inet] nft_do_chain+0x198/0x5d0 [nf_tables] nft_do_chain_inet+0xa4/0x110 [nf_tables] nf_hook_slow+0x41/0xc0 ip_local_deliver+0xce/0x110 .. Cc: Stanislav Fomichev <sdf@google.com> Cc: David Ahern <dsahern@kernel.org> Cc: Ido Schimmel <idosch@nvidia.com> Fixes: 812fa71f0d96 ("netfilter: Dissect flow after packet mangling") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217826 Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230830110043.30497-1-fw@strlen.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13Bluetooth: HCI: Introduce HCI_QUIRK_BROKEN_LE_CODEDLuiz Augusto von Dentz
[ Upstream commit 253f3399f4c09ce6f4e67350f839be0361b4d5ff ] This introduces HCI_QUIRK_BROKEN_LE_CODED which is used to indicate that LE Coded PHY shall not be used, it is then set for some Intel models that claim to support it but when used causes many problems. Cc: stable@vger.kernel.org # 6.4.y+ Link: https://github.com/bluez/bluez/issues/577 Link: https://github.com/bluez/bluez/issues/582 Link: https://lore.kernel.org/linux-bluetooth/CABBYNZKco-v7wkjHHexxQbgwwSz-S=GZ=dZKbRE1qxT1h4fFbQ@mail.gmail.com/T/# Fixes: 288c90224eec ("Bluetooth: Enable all supported LE PHY by default") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13Bluetooth: msft: Extended monitor tracking by address filterHilda Wu
[ Upstream commit 9e14606d8f38ea52a38c27692a9c1513c987a5da ] Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: 253f3399f4c0 ("Bluetooth: HCI: Introduce HCI_QUIRK_BROKEN_LE_CODED") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13Bluetooth: ISO: Notify user space about failed bis connectionsIulia Tanasescu
[ Upstream commit f777d88278170410b06a1f6633f3b9375a4ddd6b ] Some use cases require the user to be informed if BIG synchronization fails. This commit makes it so that even if the BIG sync established event arrives with error status, a new hconn is added for each BIS, and the iso layer is notified about the failed connections. Unsuccesful bis connections will be marked using the HCI_CONN_BIG_SYNC_FAILED flag. From the iso layer, the POLLERR event is triggered on the newly allocated bis sockets, before adding them to the accept list of the parent socket. From user space, a new fd for each failed bis connection will be obtained by calling accept. The user should check for the POLLERR event on the new socket, to determine if the connection was successful or not. The HCI_CONN_BIG_SYNC flag has been added to mark whether the BIG sync has been successfully established. This flag is checked at bis cleanup, so the HCI LE BIG Terminate Sync command is only issued if needed. The BT_SK_BIG_SYNC flag indicates if BIG create sync has been called for a listening socket, to avoid issuing the command everytime a BIGInfo advertising report is received. Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: 94d9ba9f9888 ("Bluetooth: hci_sync: Fix UAF in hci_disconnect_all_sync") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13Bluetooth: hci_conn: Consolidate code for aborting connectionsLuiz Augusto von Dentz
[ Upstream commit a13f316e90fdb1fb6df6582e845aa9b3270f3581 ] This consolidates code for aborting connections using hci_cmd_sync_queue so it is synchronized with other threads, but because of the fact that some commands may block the cmd_sync_queue while waiting specific events this attempt to cancel those requests by using hci_cmd_sync_cancel. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: 94d9ba9f9888 ("Bluetooth: hci_sync: Fix UAF in hci_disconnect_all_sync") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13mac80211: make ieee80211_tx_info padding explicitArnd Bergmann
[ Upstream commit a7a2ef0c4b3efbd7d6f3fabd87dbbc0b3f2de5af ] While looking at a bug, I got rather confused by the layout of the 'status' field in ieee80211_tx_info. Apparently, the intention is that status_driver_data[] is used for driver specific data, and fills up the size of the union to 40 bytes, just like the other ones. This is indeed what actually happens, but only because of the combination of two mistakes: - "void *status_driver_data[18 / sizeof(void *)];" is intended to be 18 bytes long but is actually two bytes shorter because of rounding-down in the division, to a multiple of the pointer size (4 bytes or 8 bytes). - The other fields combined are intended to be 22 bytes long, but are actually 24 bytes because of padding in front of the unaligned tx_time member, and in front of the pointer array. The two mistakes cancel out. so the size ends up fine, but it seems more helpful to make this explicit, by having a multiple of 8 bytes in the size calculation and explicitly describing the padding. Fixes: ea5907db2a9cc ("mac80211: fix struct ieee80211_tx_info size") Fixes: 02219b3abca59 ("mac80211: add WMM admission control support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230623152443.2296825-2-arnd@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13lwt: Check LWTUNNEL_XMIT_CONTINUE strictlyYan Zhai
[ Upstream commit a171fbec88a2c730b108c7147ac5e7b2f5a02b47 ] LWTUNNEL_XMIT_CONTINUE is implicitly assumed in ip(6)_finish_output2, such that any positive return value from a xmit hook could cause unexpected continue behavior, despite that related skb may have been freed. This could be error-prone for future xmit hook ops. One of the possible errors is to return statuses of dst_output directly. To make the code safer, redefine LWTUNNEL_XMIT_CONTINUE value to distinguish from dst_output statuses and check the continue condition explicitly. Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure") Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Yan Zhai <yan@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/96b939b85eda00e8df4f7c080f770970a4c5f698.1692326837.git.yan@cloudflare.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13Bluetooth: hci_conn: Always allocate unique handlesLuiz Augusto von Dentz
[ Upstream commit 9f78191cc9f1b34c2e2afd7b554a83bf034092dd ] This attempts to always allocate a unique handle for connections so they can be properly aborted by the likes of hci_abort_conn, so this uses the invalid range as a pool of unset handles that way if userspace is trying to create multiple connections at once each will be given a unique handle which will be considered unset. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: 66dee21524d9 ("Bluetooth: hci_event: drop only unbound CIS if Set CIG Parameters fails") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13Bluetooth: ISO: do not emit new LE Create CIS if previous is pendingPauli Virtanen
[ Upstream commit 7f74563e6140e42b4ffae62adbef7a65967a3f98 ] LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 #133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80be6ffc ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13Bluetooth: ISO: Add support for connecting multiple BISesIulia Tanasescu
[ Upstream commit a0bfde167b506423111ddb8cd71930497a40fc54 ] It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: 7f74563e6140 ("Bluetooth: ISO: do not emit new LE Create CIS if previous is pending") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13tcp: tcp_enter_quickack_mode() should be staticEric Dumazet
[ Upstream commit 03b123debcbc8db987bda17ed8412cc011064c22 ] After commit d2ccd7bc8acd ("tcp: avoid resetting ACK timer in DCTCP"), tcp_enter_quickack_mode() is only used from net/ipv4/tcp_input.c. Fixes: d2ccd7bc8acd ("tcp: avoid resetting ACK timer in DCTCP") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Link: https://lore.kernel.org/r/20230718162049.1444938-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.3 (git 2.53.0) at 2026-04-18 09:51:31 +0000