| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Don't try to enable Extended Tags on VFs since that bit is Reserved
and causes misleading log messages (Håkon Bugge)
- Initialize Endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)
- Apply _HPX PCIe Setting Record only to AER configuration, and only
when OS owns PCIe hotplug but not AER, to avoid clobbering Extended
Tag and Relaxed Ordering settings (Håkon Bugge)
Resource management:
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Fix bridge window alignment with optional resources, where
additional alignment requirement was previously lost (Ilpo
Järvinen)
- Stop over-estimating bridge window size since they are now assigned
without any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening
for nested bridges and endpoints (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim
failures (Ilpo Järvinen)
Driver binding:
- Fix device reference leak in pcie_port_remove_service() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Convert portdrv to use pcie_port_bus_type.probe() and .remove()
callbacks so .probe() and .remove() can eventually be removed from
struct device_driver (Uwe Kleine-König)
Error handling:
- Clear stale errors on reporting agents upon probe so they don't
look like recent errors (Lukas Wunner)
- Add generic RAS tracepoint for hotplug events (Shuai Xue)
- Add RAS tracepoint for link speed changes (Shuai Xue)
Power management:
- Avoid redundant delay on transition from D3hot to D3cold if the
device was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to
avoid saving incompletely configured device state (Brian Norris)
Power control:
- Add power_on/off callbacks with generic signature to pwrseq,
tc9563, and slot drivers so they can be used by pwrctrl core
(Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver
(Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the
PCI core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan
Sadhasivam)
Virtualization:
- Remove an incorrect unlock in pci_slot_trylock() error handling
(Jinhui Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is
enabled an all devices; previously the first device enumerated
(typically a Root Port) didn't have ACS enabled (Manivannan
Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to
work around hardware erratum; previously ACS SV was only
temporarily disabled, which worked for enumeration but not after
reset (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang
when removing the PCI device (Hou Tao)
- Remove incorrect p2pmem_alloc_mmap() warning about page refcount
(Hou Tao)
Endpoint framework:
- Add configfs sub-groups synchronously to avoid NULL pointer
dereference when racing with removal (Liu Song)
- Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink()
functions (Manikanta Maddireddy)
ASPEED PCIe controller driver:
- Add ASPEED Root Complex DT binding and driver (Jacky Chou)
Freescale i.MX6 PCIe controller driver:
- Add DT binding and driver support for an optional external refclock
in addition to the refclock from the internal PLL (Richard Zhu)
- Fix CLKREQ# control so host asserts it during enumeration and
Endpoints can use it afterwards to exit the L1.2 link state
(Richard Zhu)
NVIDIA Tegra PCIe controller driver:
- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear
down MSI domains to be built as modules (Aaron Kling)
- Allow pci-tegra to be built as a module (Aaron Kling)
NVIDIA Tegra194 PCIe controller driver:
- Relax Kconfig so tegra194 can be built for platforms beyond
Tegra194 (Vidya Sagar)
Qualcomm PCIe controller driver:
- Merge SC8180x DT binding into SM8150 (Krzysztof Kozlowski)
- Move SDX55, SDM845, QCS404, IPQ5018, IPQ6018, IPQ8074 Gen3,
IPQ8074, IPQ4019, IPQ9574, APQ8064, MSM8996, APQ8084 to dedicated
schema (Krzysztof Kozlowski)
- Add DT binding and driver support for SA8255p Endpoint being
configured by firmware (Mrinmay Sarkar)
- Parse PERST# from all PCIe bridge nodes for future platforms that
will have PERST# in Switch Downstream Ports as well as in Root
Ports (Manivannan Sadhasivam)
Renesas RZ/G3S PCIe controller driver:
- Use pci_generic_config_write() since the writability provided by
the custom wrapper is unnecessary (Claudiu Beznea)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi
Amaoto)
Synopsys DesignWare PCIe controller driver:
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability, to allow removal of
Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities in platforms that can't support
them, so the PCI core automatically falls back to INTx (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status
for drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if
link is not up to avoid an unnecessary timeout (Manivannan
Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up
IRQs to trigger enumeration instead of waiting for link to be up
because the PCI core doesn't allocate bus number space for
hierarchies that might be attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming
it dynamically, which is slow and racy with respect to other
concurrent traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Allow DWC host controller driver probe to continue if device is not
found or found but inactive; only fail when there's an error with
the link (Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers
are not accessible after PME_Turn_Off, simply wait 10ms instead of
polling for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA
ranges when necessary instead of failing (Samuel Holland)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint
Controllers that can update BAR inbound address translation without
requiring EPF driver to clear/reset the BAR first, and advertise it
for DWC-based Endpoints (Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that
can map multiple independent inbound regions in a single BAR,
implement subrange mapping, advertise it for DWC-based Endpoints,
and add Endpoint selftests for it (Koichiro Den)
- Make resizable BARs work for Endpoint multi-PF configurations;
previously it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings,
and Address Match Mode (Aksh Garg)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound
windows weren't programmed, and ECAM-related iATU entries weren't
restored after suspend/resume, so config accesses failed (Krishna
Chaitanya Chundru)
Miscellaneous:
- Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU
work so WQ_UNBOUND can eventually be removed (Marco Crivellari)"
* tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits)
PCI/bwctrl: Disable BW controller on Intel P45 using a quirk
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
PCI: host-generic: Avoid reporting incorrect 'missing reg property' error
PCI/PME: Replace RMW of Root Status register with direct write
PCI/AER: Clear stale errors on reporting agents upon probe
PCI: Don't claim disabled bridge windows
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core changes:
- Rust bindings for IO-pgtable code
- IOMMU page allocation debugging support
- Disable ATS during PCI resets
Intel VT-d changes:
- Skip dev-iotlb flush for inaccessible PCIe device
- Flush cache for PASID table before using it
- Use right invalidation method for SVA and NESTED domains
- Ensure atomicity in context and PASID entry updates
AMD-Vi changes:
- Support for nested translations
- Other minor improvements
ARM-SMMU-v2 changes:
- Configure SoC-specific prefetcher settings for Qualcomm's "MDSS"
ARM-SMMU-v3 changes:
- Improve CMDQ locking fairness for pathetically small queue sizes
- Remove tracking of the IAS as this is only relevant for AArch32 and
was causing C_BAD_STE errors
- Add device-tree support for NVIDIA's CMDQV extension
- Allow some hitless transitions for the 'MEV' and 'EATS' STE fields
- Don't disable ATS for nested S1-bypass nested domains
- Additions to the kunit selftests"
* tag 'iommu-updates-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits)
iommupt: Always add IOVA range to iotlb_gather in gather_range_pages()
iommu/amd: serialize sequence allocation under concurrent TLB invalidations
iommu/amd: Fix type of type parameter to amd_iommufd_hw_info()
iommu/arm-smmu-v3: Do not set disable_ats unless vSTE is Translate
iommu/arm-smmu-v3-test: Add nested s1bypass/s1dssbypass coverage
iommu/arm-smmu-v3: Mark EATS_TRANS safe when computing the update sequence
iommu/arm-smmu-v3: Mark STE MEV safe when computing the update sequence
iommu/arm-smmu-v3: Add update_safe bits to fix STE update sequence
iommu/arm-smmu-v3: Add device-tree support for CMDQV driver
iommu/tegra241-cmdqv: Decouple driver from ACPI
iommu/arm-smmu-qcom: Restore ACTLR settings for MDSS on sa8775p
iommu/vt-d: Fix race condition during PASID entry replacement
iommu/vt-d: Clear Present bit before tearing down context entry
iommu/vt-d: Clear Present bit before tearing down PASID entry
iommu/vt-d: Flush piotlb for SVM and Nested domain
iommu/vt-d: Flush cache for PASID table before using it
iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode
iommu/vt-d: Skip dev-iotlb flush for inaccessible PCIe device without scalable mode
rust: iommu: fix `srctree` link warning
rust: iommu: fix Rust formatting
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
- extend Landlock to enforce restrictions on a whole process, similarly
to the seccomp's TSYNC flag
- refactor data structures to simplify code and improve performance
- add documentation to cover missing parts
* tag 'landlock-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
mailmap: Add entry for Mickaël Salaün
landlock: Transpose the layer masks data structure
landlock: Add access_mask_subset() helper
selftests/landlock: Add filesystem access benchmark
landlock: Document audit blocker field format
landlock: Add errata documentation section
landlock: Add backwards compatibility for restrict flags
landlock: Refactor TCP socket type check
landlock: Minor reword of docs for TCP access rights
landlock: Document LANDLOCK_RESTRICT_SELF_TSYNC
selftests/landlock: Add LANDLOCK_RESTRICT_SELF_TSYNC tests
landlock: Multithreading support for landlock_restrict_self()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild/Kconfig updates from Nathan Chancellor:
"Kbuild:
- Drop '*_probe' pattern from modpost section check allowlist, which
hid legitimate warnings (Johan Hovold)
- Disable -Wtype-limits altogether, instead of enabling at W=2
(Vincent Mailhol)
- Improve UAPI testing to skip testing headers that require a libc
when CONFIG_CC_CAN_LINK is not set, opening up testing of headers
with no libc dependencies to more environments (Thomas Weißschuh)
- Update gendwarfksyms documentation with required dependencies
(Jihan LIN)
- Reject invalid LLVM= values to avoid unintentionally falling back
to system toolchain (Thomas Weißschuh)
- Add a script to help run the kernel build process in a container
for consistent environments and testing (Guillaume Tucker)
- Simplify kallsyms by getting rid of the relative base (Ard
Biesheuvel)
- Performance and usability improvements to scripts/make_fit.py
(Simon Glass)
- Minor various clean ups and fixes
Kconfig:
- Move XPM icons to individual files, clearing up GTK deprecation
warnings (Rostislav Krasny)
- Support
depends on FOO if BAR
as syntactic sugar for
depends on FOO || !BAR
(Nicolas Pitre, Graham Roff)
- Refactor merge_config.sh to use awk over shell/sed/grep,
dramatically speeding up processing large number of config
fragments (Anders Roxell, Mikko Rapeli)"
* tag 'kbuild-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (39 commits)
kbuild: remove dependency of run-command on config
scripts/make_fit: Compress dtbs in parallel
scripts/make_fit: Support a few more parallel compressors
kbuild: Support a FIT_EXTRA_ARGS environment variable
scripts/make_fit: Move dtb processing into a function
scripts/make_fit: Support an initial ramdisk
scripts/make_fit: Speed up operation
rust: kconfig: Don't require RUST_IS_AVAILABLE for rustc-option
MAINTAINERS: Add scripts/install.sh into Kbuild entry
modpost: Amend ppc64 save/restfpr symnames for -Os build
MIPS: tools: relocs: Ship a definition of R_MIPS_PC32
streamline_config.pl: remove superfluous exclamation mark
kbuild: dummy-tools: Add python3
scripts: kconfig: merge_config.sh: warn on duplicate input files
scripts: kconfig: merge_config.sh: use awk in checks too
scripts: kconfig: merge_config.sh: refactor from shell/sed/grep to awk
kallsyms: Get rid of kallsyms relative base
mips: Add support for PC32 relocations in vmlinux
Documentation: dev-tools: add container.rst page
scripts: add tool to run containerized builds
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Add support for GMSL1 and GMSL‑coax modules (PCI mgb4)
- Add driver for TI VIP
- AV1 – first kernel support (pixel‑format, decoder, transcoder)
- Three new camera‑sensor drivers (os05b10, s5k3m5, s5kjn1)
- Synopsys CSI‑2 receiver driver
- Verisilicon & rkvdec – major fixes and enhancements
- IPU6 (and 7) fixes and preparation for metadata
- omap3isp: v4l2-compliance updates
- Fix DVB streaming, drop wait_prepare/finish (dvb/vb2)
* tag 'media/v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (307 commits)
media: uvcvideo: Pass allocation size directly to uvc_alloc_urb_buffer
media: uvcvideo: Fix allocation for small frame sizes
media: uvcvideo: Return queued buffers on start_streaming() failure
media: uvcvideo: Create an ID namespace for streaming output terminals
media: rkvdec: Add HEVC support for the VDPU383 variant
media: rkvdec: Add HEVC support for the VDPU381 variant
media: rkvdec: Add H264 support for the VDPU383 variant
media: rkvdec: Add H264 support for the VDPU381 variant
media: rkvdec: Disable multicore support
media: rkvdec: Enable all clocks without naming them
media: rkvdec: Support per-variant interrupt handler
media: rkvdec: Add RCB and SRAM support
media: rkvdec: Add variant specific coded formats list
media: rkvdec: Move hevc functions to common file
media: rkvdec: Move h264 functions to common file
media: rkvdec: Use structs to represent the HW RPS
media: rkvdec: Move cabac tables to their own source file
media: rkvdec: Switch to using structs instead of writel
media: visl: Add HEVC short and long term RPS sets
media: v4l2-ctrls: Add hevc_ext_sps_[ls]t_rps controls
...
|
|
Merge in late fixes in preparation for the net-next PR.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler Kconfig space updates:
- Further consolidate configurable preemption modes (Peter Zijlstra)
Reduce the number of architectures that are allowed to offer
PREEMPT_NONE and PREEMPT_VOLUNTARY, reducing the number of
preemption models from four to just two: 'full' and 'lazy' on
up-to-date architectures (arm64, loongarch, powerpc, riscv, s390,
x86).
None and voluntary are only available as legacy features on
platforms that don't implement lazy preemption yet, or which don't
even support preemption.
The goal is to eventually remove cond_resched() and voluntary
preemption altogether.
RSEQ based 'scheduler time slice extension' support (Thomas Gleixner
and Peter Zijlstra):
This allows a thread to request a time slice extension when it enters
a critical section to avoid contention on a resource when the thread
is scheduled out inside of the critical section.
- Add fields and constants for time slice extension
- Provide static branch for time slice extensions
- Add statistics for time slice extensions
- Add prctl() to enable time slice extensions
- Implement sys_rseq_slice_yield()
- Implement syscall entry work for time slice extensions
- Implement time slice extension enforcement timer
- Reset slice extension when scheduled
- Implement rseq_grant_slice_extension()
- entry: Hook up rseq time slice extension
- selftests: Implement time slice extension test
- Allow registering RSEQ with slice extension
- Move slice_ext_nsec to debugfs
- Lower default slice extension
- selftests/rseq: Add rseq slice histogram script
Scheduler performance/scalability improvements:
- Update rq->avg_idle when a task is moved to an idle CPU, which
improves the scalability of various workloads (Shubhang Kaushik)
- Reorder fields in 'struct rq' for better caching (Blake Jones)
- Fair scheduler SMP NOHZ balancing code speedups (Shrikanth Hegde):
- Move checking for nohz cpus after time check
- Change likelyhood of nohz.nr_cpus
- Remove nohz.nr_cpus and use weight of cpumask instead
- Avoid false sharing for sched_clock_irqtime (Wangyang Guo)
- Cleanups (Yury Norov):
- Drop useless cpumask_empty() in find_energy_efficient_cpu()
- Simplify task_numa_find_cpu()
- Use cpumask_weight_and() in sched_balance_find_dst_group()
DL scheduler updates:
- Add a deadline server for sched_ext tasks (by Andrea Righi and Joel
Fernandes, with fixes by Peter Zijlstra)
RT scheduler updates:
- Skip currently executing CPU in rto_next_cpu() (Chen Jinghuang)
Entry code updates and performance improvements (Jinjie Ruan)
This is part of the scheduler tree in this cycle due to inter-
dependencies with the RSEQ based time slice extension work:
- Remove unused syscall argument from syscall_trace_enter()
- Rework syscall_exit_to_user_mode_work() for architecture reuse
- Add arch_ptrace_report_syscall_entry/exit()
- Inline syscall_exit_work() and syscall_trace_enter()
Scheduler core updates (Peter Zijlstra):
- Rework sched_class::wakeup_preempt() and rq_modified_*()
- Avoid rq->lock bouncing in sched_balance_newidle()
- Rename rcu_dereference_check_sched_domain() =>
rcu_dereference_sched_domain()
- <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper
Fair scheduler updates/refactoring (Peter Zijlstra and Ingo Molnar):
- Fold the sched_avg update
- Change rcu_dereference_check_sched_domain() to rcu-sched
- Switch to rcu_dereference_all()
- Remove superfluous rcu_read_lock()
- Limit hrtick work
- Join two #ifdef CONFIG_FAIR_GROUP_SCHED blocks
- Clean up comments in 'struct cfs_rq'
- Separate se->vlag from se->vprot
- Rename cfs_rq::avg_load to cfs_rq::sum_weight
- Rename cfs_rq::avg_vruntime to ::sum_w_vruntime & helper functions
- Introduce and use the vruntime_cmp() and vruntime_op() wrappers for
wrapped-signed aritmetics
- Sort out 'blocked_load*' namespace noise
Scheduler debugging code updates:
- Export hidden tracepoints to modules (Gabriele Monaco)
- Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
(Fushuai Wang)
- Add assertions to QUEUE_CLASS (Peter Zijlstra)
- hrtimer: Fix tracing oddity (Thomas Gleixner)
Misc fixes and cleanups:
- Re-evaluate scheduling when migrating queued tasks out of throttled
cgroups (Zicheng Qu)
- Remove task_struct->faults_disabled_mapping (Christoph Hellwig)
- Fix math notation errors in avg_vruntime comment (Zhan Xusheng)
- sched/cpufreq: Use %pe format for PTR_ERR() printing
(zenghongling)"
* tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
sched: Re-evaluate scheduling when migrating queued tasks out of throttled cgroups
sched/cpufreq: Use %pe format for PTR_ERR() printing
sched/rt: Skip currently executing CPU in rto_next_cpu()
sched/clock: Avoid false sharing for sched_clock_irqtime
selftests/sched_ext: Add test for DL server total_bw consistency
selftests/sched_ext: Add test for sched_ext dl_server
sched/debug: Fix dl_server (re)start conditions
sched/debug: Add support to change sched_ext server params
sched_ext: Add a DL server for sched_ext tasks
sched/debug: Stop and start server based on if it was active
sched/debug: Fix updating of ppos on server write ops
sched/deadline: Clear the defer params
entry: Inline syscall_exit_work() and syscall_trace_enter()
entry: Add arch_ptrace_report_syscall_entry/exit()
entry: Rework syscall_exit_to_user_mode_work() for architecture reuse
entry: Remove unused syscall argument from syscall_trace_enter()
sched: remove task_struct->faults_disabled_mapping
sched: Update rq->avg_idle when a task is moved to an idle CPU
selftests/rseq: Add rseq slice histogram script
hrtimer: Fix trace oddity
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance event updates from Ingo Molnar:
"x86 PMU driver updates:
- Add support for the core PMU for Intel Diamond Rapids (DMR) CPUs
(Dapeng Mi)
Compared to previous iterations of the Intel PMU code, there's been
a lot of changes, which center around three main areas:
- Introduce the OFF-MODULE RESPONSE (OMR) facility to replace the
Off-Core Response (OCR) facility
- New PEBS data source encoding layout
- Support the new "RDPMC user disable" feature
- Likewise, a large series adds uncore PMU support for Intel Diamond
Rapids (DMR) CPUs (Zide Chen)
This centers around these four main areas:
- DMR may have two Integrated I/O and Memory Hub (IMH) dies,
separate from the compute tile (CBB) dies. Each CBB and each IMH
die has its own discovery domain.
- Unlike prior CPUs that retrieve the global discovery table
portal exclusively via PCI or MSR, DMR uses PCI for IMH PMON
discovery and MSR for CBB PMON discovery.
- DMR introduces several new PMON types: SCA, HAMVF, D2D_ULA, UBR,
PCIE4, CRS, CPC, ITC, OTC, CMS, and PCIE6.
- IIO free-running counters in DMR are MMIO-based, unlike SPR.
- Also add support for Add missing PMON units for Intel Panther Lake,
and support Nova Lake (NVL), which largely maps to Panther Lake.
(Zide Chen)
- KVM integration: Add support for mediated vPMUs (by Kan Liang and
Sean Christopherson, with fixes and cleanups by Peter Zijlstra,
Sandipan Das and Mingwei Zhang)
- Add Intel cstate driver to support for Wildcat Lake (WCL) CPUs,
which are a low-power variant of Panther Lake (Zide Chen)
- Add core, cstate and MSR PMU support for the Airmont NP Intel CPU
(aka MaxLinear Lightning Mountain), which maps to the existing
Airmont code (Martin Schiller)
Performance enhancements:
- Speed up kexec shutdown by avoiding unnecessary cross CPU calls
(Jan H. Schönherr)
- Fix slow perf_event_task_exit() with LBR callstacks (Namhyung Kim)
User-space stack unwinding support:
- Various cleanups and refactorings in preparation to generalize the
unwinding code for other architectures (Jens Remus)
Uprobes updates:
- Transition from kmap_atomic to kmap_local_page (Keke Ming)
- Fix incorrect lockdep condition in filter_chain() (Breno Leitao)
- Fix XOL allocation failure for 32-bit tasks (Oleg Nesterov)
Misc fixes and cleanups:
- s390: Remove kvm_types.h from Kbuild (Randy Dunlap)
- x86/intel/uncore: Convert comma to semicolon (Chen Ni)
- x86/uncore: Clean up const mismatch (Greg Kroah-Hartman)
- x86/ibs: Fix typo in dc_l2tlb_miss comment (Xiang-Bin Shi)"
* tag 'perf-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
s390: remove kvm_types.h from Kbuild
uprobes: Fix incorrect lockdep condition in filter_chain()
x86/ibs: Fix typo in dc_l2tlb_miss comment
x86/uprobes: Fix XOL allocation failure for 32-bit tasks
perf/x86/intel/uncore: Convert comma to semicolon
perf/x86/intel: Add support for rdpmc user disable feature
perf/x86: Use macros to replace magic numbers in attr_rdpmc
perf/x86/intel: Add core PMU support for Novalake
perf/x86/intel: Add support for PEBS memory auxiliary info field in NVL
perf/x86/intel: Add core PMU support for DMR
perf/x86/intel: Add support for PEBS memory auxiliary info field in DMR
perf/x86/intel: Support the 4 new OMR MSRs introduced in DMR and NVL
perf/core: Fix slow perf_event_task_exit() with LBR callstacks
perf/core: Speed up kexec shutdown by avoiding unnecessary cross CPU calls
uprobes: use kmap_local_page() for temporary page mappings
arm/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
mips/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
arm64/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
riscv/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
perf/x86/intel/uncore: Add Nova Lake support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Support associating BPF program with struct_ops (Amery Hung)
- Switch BPF local storage to rqspinlock and remove recursion detection
counters which were causing false positives (Amery Hung)
- Fix live registers marking for indirect jumps (Anton Protopopov)
- Introduce execution context detection BPF helpers (Changwoo Min)
- Improve verifier precision for 32bit sign extension pattern
(Cupertino Miranda)
- Optimize BTF type lookup by sorting vmlinux BTF and doing binary
search (Donglin Peng)
- Allow states pruning for misc/invalid slots in iterator loops (Eduard
Zingerman)
- In preparation for ASAN support in BPF arenas teach libbpf to move
global BPF variables to the end of the region and enable arena kfuncs
while holding locks (Emil Tsalapatis)
- Introduce support for implicit arguments in kfuncs and migrate a
number of them to new API. This is a prerequisite for cgroup
sub-schedulers in sched-ext (Ihor Solodrai)
- Fix incorrect copied_seq calculation in sockmap (Jiayuan Chen)
- Fix ORC stack unwind from kprobe_multi (Jiri Olsa)
- Speed up fentry attach by using single ftrace direct ops in BPF
trampolines (Jiri Olsa)
- Require frozen map for calculating map hash (KP Singh)
- Fix lock entry creation in TAS fallback in rqspinlock (Kumar
Kartikeya Dwivedi)
- Allow user space to select cpu in lookup/update operations on per-cpu
array and hash maps (Leon Hwang)
- Make kfuncs return trusted pointers by default (Matt Bobrowski)
- Introduce "fsession" support where single BPF program is executed
upon entry and exit from traced kernel function (Menglong Dong)
- Allow bpf_timer and bpf_wq use in all programs types (Mykyta
Yatsenko, Andrii Nakryiko, Kumar Kartikeya Dwivedi, Alexei
Starovoitov)
- Make KF_TRUSTED_ARGS the default for all kfuncs and clean up their
definition across the tree (Puranjay Mohan)
- Allow BPF arena calls from non-sleepable context (Puranjay Mohan)
- Improve register id comparison logic in the verifier and extend
linked registers with negative offsets (Puranjay Mohan)
- In preparation for BPF-OOM introduce kfuncs to access memcg events
(Roman Gushchin)
- Use CFI compatible destructor kfunc type (Sami Tolvanen)
- Add bitwise tracking for BPF_END in the verifier (Tianci Cao)
- Add range tracking for BPF_DIV and BPF_MOD in the verifier (Yazhou
Tang)
- Make BPF selftests work with 64k page size (Yonghong Song)
* tag 'bpf-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (268 commits)
selftests/bpf: Fix outdated test on storage->smap
selftests/bpf: Choose another percpu variable in bpf for btf_dump test
selftests/bpf: Remove test_task_storage_map_stress_lookup
selftests/bpf: Update task_local_storage/task_storage_nodeadlock test
selftests/bpf: Update task_local_storage/recursion test
selftests/bpf: Update sk_storage_omem_uncharge test
bpf: Switch to bpf_selem_unlink_nofail in bpf_local_storage_{map_free, destroy}
bpf: Support lockless unlink when freeing map or local storage
bpf: Prepare for bpf_selem_unlink_nofail()
bpf: Remove unused percpu counter from bpf_local_storage_map_free
bpf: Remove cgroup local storage percpu counter
bpf: Remove task local storage percpu counter
bpf: Change local_storage->lock and b->lock to rqspinlock
bpf: Convert bpf_selem_unlink to failable
bpf: Convert bpf_selem_link_map to failable
bpf: Convert bpf_selem_unlink_map to failable
bpf: Select bpf_local_storage_map_bucket based on bpf_local_storage
selftests/xsk: fix number of Tx frags in invalid packet
selftests/xsk: properly handle batch ending in the middle of a packet
bpf: Prevent reentrance into call_rcu_tasks_trace()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"Mostly small cleanups and various scattered annotations and flex array
warning fixes that we reviewed by unlanded in other trees. Introduces
new annotation for expanding counted_by to pointer members, now that
compiler behavior between GCC and Clang has been normalized.
- Various missed __counted_by annotations (Thorsten Blum)
- Various missed -Wflex-array-member-not-at-end fixes (Gustavo A. R.
Silva)
- Avoid leftover tempfiles for interrupted compile-time FORTIFY tests
(Nicolas Schier)
- Remove non-existant CONFIG_UBSAN_REPORT_FULL from docs (Stefan
Wiehler)
- fortify: Use C arithmetic not FIELD_xxx() in FORTIFY_REASON defines
(David Laight)
- Add __counted_by_ptr attribute, tests, and first user (Bill
Wendling, Kees Cook)
- Update MAINTAINERS file to make hardening section not include
pstore"
* tag 'hardening-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
MAINTAINERS: pstore: Remove L: entry
nfp: tls: Avoid -Wflex-array-member-not-at-end warnings
carl9170: Avoid -Wflex-array-member-not-at-end warning
coredump: Use __counted_by_ptr for struct core_name::corename
lkdtm/bugs: Add __counted_by_ptr() test PTR_BOUNDS
compiler_types.h: Attributes: Add __counted_by_ptr macro
fortify: Cleanup temp file also on non-successful exit
fortify: Rename temporary file to match ignore pattern
fortify: Use C arithmetic not FIELD_xxx() in FORTIFY_REASON defines
ecryptfs: Annotate struct ecryptfs_message with __counted_by
fs/xattr: Annotate struct simple_xattr with __counted_by
crypto: af_alg - Annotate struct af_alg_iv with __counted_by
Kconfig.ubsan: Remove CONFIG_UBSAN_REPORT_FULL from documentation
drm/nouveau: fifo: Avoid -Wflex-array-member-not-at-end warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's a little less than normal, probably due to LPC & Christmas/New
Year meaning that a few series weren't quite ready or reviewed in
time. It's still useful across the board, despite the only real
feature being support for the LS64 feature enabling 64-byte atomic
accesses to endpoints that support it.
ACPI:
- Add interrupt signalling support to the AGDI handler
- Add Catalin and myself to the arm64 ACPI MAINTAINERS entry
CPU features:
- Drop Kconfig options for PAN and LSE (these are detected at runtime)
- Add support for 64-byte single-copy atomic instructions (LS64/LS64V)
- Reduce MTE overhead when executing in the kernel on Ampere CPUs
- Ensure POR_EL0 value exposed via ptrace is up-to-date
- Fix error handling on GCS allocation failure
CPU frequency:
- Add CPU hotplug support to the FIE setup in the AMU driver
Entry code:
- Minor optimisations and cleanups to the syscall entry path
- Preparatory rework for moving to the generic syscall entry code
Hardware errata:
- Work around Spectre-BHB on TSV110 processors
- Work around broken CMO propagation on some systems with the SI-L1
interconnect
Miscellaneous:
- Disable branch profiling for arch/arm64/ to avoid issues with
noinstr
- Minor fixes and cleanups (kexec + ubsan, WARN_ONCE() instead of
WARN_ON(), reduction of boolean expression)
- Fix custom __READ_ONCE() implementation for LTO builds when
operating on non-atomic types
Perf and PMUs:
- Support for CMN-600AE
- Be stricter about supported hardware in the CMN driver
- Support for DSU-110 and DSU-120
- Support for the cycles event in the DSU driver (alongside the
dedicated cycles counter)
- Use IRQF_NO_THREAD instead of IRQF_ONESHOT in the cxlpmu driver
- Use !bitmap_empty() as a faster alternative to bitmap_weight()
- Fix SPE error handling when failing to resume profiling
Selftests:
- Add support for the FORCE_TARGETS option to the arm64 kselftests
- Avoid nolibc-specific my_syscall() function
- Add basic test for the LS64 HWCAP
- Extend fp-pidbench to cover additional workload patterns"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (43 commits)
perf/arm-cmn: Reject unsupported hardware configurations
perf: arm_spe: Properly set hw.state on failures
arm64/gcs: Fix error handling in arch_set_shadow_stack_status()
arm64: Fix non-atomic __READ_ONCE() with CONFIG_LTO=y
arm64: poe: fix stale POR_EL0 values for ptrace
kselftest/arm64: Raise default number of loops in fp-pidbench
kselftest/arm64: Add a no-SVE loop after SVE in fp-pidbench
perf/cxlpmu: Replace IRQF_ONESHOT with IRQF_NO_THREAD
arm64: mte: Set TCMA1 whenever MTE is present in the kernel
arm64/ptrace: Return early for ptrace_report_syscall_entry() error
arm64/ptrace: Split report_syscall()
arm64: Remove unused _TIF_WORK_MASK
kselftest/arm64: Add missing file in .gitignore
arm64: errata: Workaround for SI L1 downstream coherency issue
kselftest/arm64: Add HWCAP test for FEAT_LS64
arm64: Add support for FEAT_{LS64, LS64_V}
KVM: arm64: Enable FEAT_{LS64, LS64_V} in the supported guest
arm64: Provide basic EL2 setup for FEAT_{LS64, LS64_V} usage at EL0/1
KVM: arm64: Handle DABT caused by LS64* instructions on unsupported memory
KVM: arm64: Add documentation for KVM_EXIT_ARM_LDST64B
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Support for batch request processing for ublk, improving the
efficiency of the kernel/ublk server communication. This can yield
nice 7-12% performance improvements
- Support for integrity data for ublk
- Various other ublk improvements and additions, including a ton of
selftests additions and updated
- Move the handling of blk-crypto software fallback from below the
block layer to above it. This reduces the complexity of dealing with
bio splitting
- Series fixing a number of potential deadlocks in blk-mq related to
the queue usage counter and writeback throttling and rq-qos debugfs
handling
- Add an async_depth queue attribute, to resolve a performance
regression that's been around for a qhilw related to the scheduler
depth handling
- Only use task_work for IOPOLL completions on NVMe, if it is necessary
to do so. An earlier fix for an issue resulted in all these
completions being punted to task_work, to guarantee that completions
were only run for a given io_uring ring when it was local to that
ring. With the new changes, we can detect if it's necessary to use
task_work or not, and avoid it if possible.
- rnbd fixes:
- Fix refcount underflow in device unmap path
- Handle PREFLUSH and NOUNMAP flags properly in protocol
- Fix server-side bi_size for special IOs
- Zero response buffer before use
- Fix trace format for flags
- Add .release to rnbd_dev_ktype
- MD pull requests via Yu Kuai
- Fix raid5_run() to return error when log_init() fails
- Fix IO hang with degraded array with llbitmap
- Fix percpu_ref not resurrected on suspend timeout in llbitmap
- Fix GPF in write_page caused by resize race
- Fix NULL pointer dereference in process_metadata_update
- Fix hang when stopping arrays with metadata through dm-raid
- Fix any_working flag handling in raid10_sync_request
- Refactor sync/recovery code path, improve error handling for
badblocks, and remove unused recovery_disabled field
- Consolidate mddev boolean fields into mddev_flags
- Use mempool to allocate stripe_request_ctx and make sure
max_sectors is not less than io_opt in raid5
- Fix return value of mddev_trylock
- Fix memory leak in raid1_run()
- Add Li Nan as mdraid reviewer
- Move phys_vec definitions to the kernel types, mostly in preparation
for some VFIO and RDMA changes
- Improve the speed for secure erase for some devices
- Various little rust updates
- Various other minor fixes, improvements, and cleanups
* tag 'for-7.0/block-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
blk-mq: ABI/sysfs-block: fix docs build warnings
selftests: ublk: organize test directories by test ID
block: decouple secure erase size limit from discard size limit
block: remove redundant kill_bdev() call in set_blocksize()
blk-mq: add documentation for new queue attribute async_dpeth
block, bfq: convert to use request_queue->async_depth
mq-deadline: covert to use request_queue->async_depth
kyber: covert to use request_queue->async_depth
blk-mq: add a new queue sysfs attribute async_depth
blk-mq: factor out a helper blk_mq_limit_depth()
blk-mq-sched: unify elevators checking for async requests
block: convert nr_requests to unsigned int
block: don't use strcpy to copy blockdev name
blk-mq-debugfs: warn about possible deadlock
blk-mq-debugfs: add missing debugfs_mutex in blk_mq_debugfs_register_hctxs()
blk-mq-debugfs: remove blk_mq_debugfs_unregister_rqos()
blk-mq-debugfs: make blk_mq_debugfs_register_rqos() static
blk-rq-qos: fix possible debugfs_mutex deadlock
blk-mq-debugfs: factor out a helper to register debugfs for all rq_qos
blk-wbt: fix possible deadlock to nest pcpu_alloc_mutex under q_usage_counter
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring bpf filters from Jens Axboe:
"This adds support for both cBPF filters for io_uring, as well as task
inherited restrictions and filters.
seccomp and io_uring don't play along nicely, as most of the
interesting data to filter on resides somewhat out-of-band, in the
submission queue ring.
As a result, things like containers and systemd that apply seccomp
filters, can't filter io_uring operations.
That leaves them with just one choice if filtering is critical -
filter the actual io_uring_setup(2) system call to simply disallow
io_uring. That's rather unfortunate, and has limited us because of it.
io_uring already has some filtering support. It requires the ring to
be setup in a disabled state, and then a filter set can be applied.
This filter set is completely bi-modal - an opcode is either enabled
or it's not. Once a filter set is registered, the ring can be enabled.
This is very restrictive, and it's not useful at all to systemd or
containers which really want both broader and more specific control.
This first adds support for cBPF filters for opcodes, which enables
tighter control over what exactly a specific opcode may do. As
examples, specific support is added for IORING_OP_OPENAT/OPENAT2,
allowing filtering on resolve flags. And another example is added for
IORING_OP_SOCKET, allowing filtering on domain/type/protocol. These
are both common use cases. cBPF was chosen rather than eBPF, because
the latter is often restricted in containers as well.
These filters are run post the init phase of the request, which allows
filters to even dip into data that is being passed in struct in user
memory, as the init side of requests make that data stable by bringing
it into the kernel. This allows filtering without needing to copy this
data twice, or have filters etc know about the exact layout of the
user data. The filters get the already copied and sanitized data
passed.
On top of that support is added for per-task filters, meaning that any
ring created with a task that has a per-task filter will get those
filters applied when it's created. These filters are inherited across
fork as well. Once a filter has been registered, any further added
filters may only further restrict what operations are permitted.
Filters cannot change the return value of an operation, they can only
permit or deny it based on the contents"
* tag 'io_uring-bpf-restrictions.4-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: allow registration of per-task restrictions
io_uring: add task fork hook
io_uring/bpf_filter: add ref counts to struct io_bpf_filter
io_uring/bpf_filter: cache lookup table in ctx->bpf_filters
io_uring/bpf_filter: allow filtering on contents of struct open_how
io_uring/net: allow filtering on IORING_OP_SOCKET data
io_uring: add support for BPF filtering for opcode restrictions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Clean up the IORING_SETUP_R_DISABLED and submitter task checking,
mostly just in preparation for relaxing the locking for SINGLE_ISSUER
in the future.
- Improve IOPOLL by using a doubly linked list to manage completions.
Previously it was singly listed, which meant that to complete request
N in the chain 0..N-1 had to have completed first. With a doubly
linked list we can complete whatever request completes in that order,
rather than need to wait for a consecutive range to be available.
This reduces latencies.
- Improve the restriction setup and checking. Mostly in preparation for
adding further features on top of that. Coming in a separate pull
request.
- Split out task_work and wait handling into separate files. These are
mostly nicely abstracted already, but still remained in the
io_uring.c file which is on the larger side.
- Use GFP_KERNEL_ACCOUNT in a few more spots, where appropriate.
- Ensure even the idle io-wq worker exits if a task no longer has any
rings open.
- Add support for a non-circular submission queue.
By default, the SQ ring keeps moving around, even if only a few
entries are used for each submission. This can be wasteful in terms
of cachelines.
If IORING_SETUP_SQ_REWIND is set for the ring when created, each
submission will start at offset 0 instead of where we last left off
doing submissions.
- Various little cleanups
* tag 'for-7.0/io_uring-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (30 commits)
io_uring/kbuf: fix memory leak if io_buffer_add_list fails
io_uring: Add SPDX id lines to remaining source files
io_uring: allow io-wq workers to exit when unused
io_uring/io-wq: add exit-on-idle state
io_uring/net: don't continue send bundle if poll was required for retry
io_uring/rsrc: use GFP_KERNEL_ACCOUNT consistently
io_uring/futex: use GFP_KERNEL_ACCOUNT for futex data allocation
io_uring/io-wq: handle !sysctl_hung_task_timeout_secs
io_uring: fix bad indentation for setup flags if statement
io_uring/rsrc: take unsigned index in io_rsrc_node_lookup()
io_uring: introduce non-circular SQ
io_uring: split out CQ waiting code into wait.c
io_uring: split out task work code into tw.c
io_uring/io-wq: don't trigger hung task for syzbot craziness
io_uring: add IO_URING_EXIT_WAIT_MAX definition
io_uring/sync: validate passed in offset
io_uring/eventfd: remove unused ctx->evfd_last_cq_tail member
io_uring/timeout: annotate data race in io_flush_timeouts()
io_uring/uring_cmd: explicitly disallow cancelations for IOPOLL
io_uring: fix IOPOLL with passthrough I/O
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/nilfs2
Pull nilfs2 updates from Viacheslav Dubeyko:
- Fix potential block overflow that cause system hang
When executing the FITRIM command, an underflow can occur in the
calculation of nblocks. This ultimately leads to the block layer
function __blkdev_issue_discard() taking an excessively long time
to process the bio chain, and the ns_segctor_sem lock remains held
for a long period.
This prevents other tasks from acquiring the ns_segctor_sem lock,
resulting in a hang reported by syzbot (Edward Adam Davis)
- Fix missing struct keywords in nilfs2_api.h kernel-doc (Ryusuke
Konishi)
- Convert nilfs_super_block to kernel-doc
Eliminate 40+ kernel-doc warnings in nilfs2_ondisk.h by converting
all of the struct member comments to kernel-doc comments (Randy
Dunlap)
* tag 'nilfs2-v7.0-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/nilfs2:
nilfs2: fix missing struct keywords in nilfs2_api.h kernel-doc
nilfs2: convert nilfs_super_block to kernel-doc
nilfs2: Fix potential block overflow that cause system hang
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"User visible changes, feature updates:
- when using block size > page size, enable direct IO
- fallback to buffered IO if the data profile has duplication,
workaround to avoid checksum mismatches on block group profiles
with redundancy, real direct IO is possible on single or RAID0
- redo export of zoned statistics, moved from sysfs to
/proc/pid/mountstats due to size limitations of the former
Experimental features:
- remove offload checksum tunable, intended to find best way to do it
but since we've switched to offload to thread for everything we
don't need it anymore
- initial support for remap-tree feature, a translation layer of
logical block addresses that allow changes without moving/rewriting
blocks to do eg. relocation, or other changes that require COW
Notable fixes:
- automatic removal of accidentally leftover chunks when
free-space-tree is enabled since mkfs.btrfs v6.16.1
- zoned mode:
- do not try to append to conventional zones when RAID is mixing
zoned and conventional drives
- fixup write pointers when mixing zoned and conventional on
DUP/RAID* profiles
- when using squota, relax deletion rules for qgroups with 0 members
to allow easier recovery from accounting bugs, also add more checks
to detect bad accounting
- fix periodic reclaim scanning, properly check boundary conditions
not to trigger it unexpectedly or miss the time to run it
- trim:
- continue after first error
- change reporting to the first detected error
- add more cancellation points
- reduce contention of big device lock that can block other
operations when there's lots of trimmed space
- when chunk allocation is forced (needs experimental build) fix
transaction abort when unexpected space layout is detected
Core:
- switch to crypto library API for checksumming, removed module
dependencies, pointer indirections, etc.
- error handling improvements
- adjust how and where transaction commit or abort are done and are
maybe not necessary
- minor compression optimization to skip single block ranges
- improve how compression folios are handled
- new and updated selftests
- cleanups, refactoring:
- auto-freeing and other automatic variable cleanup conversion
- structure size optimizations
- condition annotations"
* tag 'for-6.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (137 commits)
btrfs: get rid of compressed_bio::compressed_folios[]
btrfs: get rid of compressed_folios[] usage for encoded writes
btrfs: get rid of compressed_folios[] usage for compressed read
btrfs: remove the old btrfs_compress_folios() infrastructure
btrfs: switch to btrfs_compress_bio() interface for compressed writes
btrfs: introduce btrfs_compress_bio() helper
btrfs: zlib: introduce zlib_compress_bio() helper
btrfs: zstd: introduce zstd_compress_bio() helper
btrfs: lzo: introduce lzo_compress_bio() helper
btrfs: zoned: factor out the zone loading part into a testable function
btrfs: add cleanup function for btrfs_free_chunk_map
btrfs: tests: add cleanup functions for test specific functions
btrfs: raid56: fix memory leak of btrfs_raid_bio::stripe_uptodate_bitmap
btrfs: tests: add unit tests for pending extent walking functions
btrfs: fix EEXIST abort due to non-consecutive gaps in chunk allocation
btrfs: fix transaction commit blocking during trim of unallocated space
btrfs: handle user interrupt properly in btrfs_trim_fs()
btrfs: preserve first error in btrfs_trim_fs()
btrfs: continue trimming remaining devices on failure
btrfs: do not BUG_ON() in btrfs_remove_block_group()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
- statmount: accept fd as a parameter
Extend struct mnt_id_req with a file descriptor field and a new
STATMOUNT_BY_FD flag. When set, statmount() returns mount information
for the mount the fd resides on — including detached mounts
(unmounted via umount2(MNT_DETACH)).
For detached mounts the STATMOUNT_MNT_POINT and STATMOUNT_MNT_NS_ID
mask bits are cleared since neither is meaningful. The capability
check is skipped for STATMOUNT_BY_FD since holding an fd already
implies prior access to the mount and equivalent information is
available through fstatfs() and /proc/pid/mountinfo without
privilege. Includes comprehensive selftests covering both attached
and detached mount cases.
- fs: Remove internal old mount API code (1 patch)
Now that every in-tree filesystem has been converted to the new
mount API, remove all the legacy shim code in fs_context.c that
handled unconverted filesystems. This deletes ~280 lines including
legacy_init_fs_context(), the legacy_fs_context struct, and
associated wrappers. The mount(2) syscall path for userspace remains
untouched. Documentation references to the legacy callbacks are
cleaned up.
- mount: add OPEN_TREE_NAMESPACE to open_tree()
Container runtimes currently use CLONE_NEWNS to copy the caller's
entire mount namespace — only to then pivot_root() and recursively
unmount everything they just copied. With large mount tables and
thousands of parallel container launches this creates significant
contention on the namespace semaphore.
OPEN_TREE_NAMESPACE copies only the specified mount tree (like
OPEN_TREE_CLONE) but returns a mount namespace fd instead of a
detached mount fd. The new namespace contains the copied tree mounted
on top of a clone of the real rootfs.
This functions as a combined unshare(CLONE_NEWNS) + pivot_root() in a
single syscall. Works with user namespaces: an unshare(CLONE_NEWUSER)
followed by OPEN_TREE_NAMESPACE creates a mount namespace owned by
the new user namespace. Mount namespace file mounts are excluded from
the copy to prevent cycles. Includes ~1000 lines of selftests"
* tag 'vfs-7.0-rc1.namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/open_tree: add OPEN_TREE_NAMESPACE tests
mount: add OPEN_TREE_NAMESPACE
fs: Remove internal old mount API code
selftests: statmount: tests for STATMOUNT_BY_FD
statmount: accept fd as a parameter
statmount: permission check should return EPERM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs nullfs update from Christian Brauner:
"Add a completely catatonic minimal pseudo filesystem called "nullfs"
and make pivot_root() work in the initramfs.
Currently pivot_root() does not work on the real rootfs because it
cannot be unmounted. Userspace has to recursively delete initramfs
contents manually before continuing boot, using the fragile
switch_root sequence (overmount + chroot).
Add nullfs, a minimal immutable filesystem that serves as the true
root of the mount hierarchy. The mutable rootfs (tmpfs/ramfs) is
mounted on top of it. This allows userspace to simply:
chdir(new_root);
pivot_root(".", ".");
umount2(".", MNT_DETACH);
without the traditional switch_root workarounds. systemd already
handles this correctly. It tries pivot_root() first and falls back
to MS_MOVE only when that fails.
This also means rootfs mounts in unprivileged namespaces no longer
need MNT_LOCKED, since the immutable nullfs guarantees nothing can be
revealed by unmounting the covering mount.
nullfs is a single-instance filesystem (get_tree_single()) marked
SB_NOUSER | SB_I_NOEXEC | SB_I_NODEV with an immutable empty root
directory. This means sooner or later it can be used to overmount
other directories to hide their contents without any additional
protection needed.
We enable it unconditionally. If we see any real regression we'll
hide it behind a boot option.
nullfs has extensions beyond this in the future. It will serve as a
concept to support the creation of completely empty mount namespaces -
which is work coming up in the next cycle"
* tag 'vfs-7.0-rc1.nullfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: use nullfs unconditionally as the real rootfs
docs: mention nullfs
fs: add immutable rootfs
fs: add init_pivot_root()
fs: ensure that internal tmpfs mount gets mount id zero
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs initrd removal from Christian Brauner:
"Remove the deprecated linuxrc-based initrd code path and related dead
code. The linuxrc initrd path was deprecated in 2020 and this series
completes its removal. If we see real-life regressions we'll revert.
The core change removes handle_initrd() and init_linuxrc() — the
entire flow that ran /linuxrc from an initrd, pivoted roots, and
handed off to the real root filesystem. With that gone, initrd_load()
becomes void (no longer short-circuits prepare_namespace()),
rd_load_image() is simplified to always load /initrd.image instead of
taking a path, and rd_load_disk() is deleted.
The /proc/sys/kernel/real-root-dev sysctl and its backing variable are
removed since they only existed for linuxrc to communicate the real
root device back to the kernel.
The no-op load_ramdisk= and prompt_ramdisk= parameters are dropped,
and noinitrd and ramdisk_start= gain deprecation warnings.
Initramfs is entirely unaffected. The non-linuxrc initrd path
(root=/dev/ram0) is preserved but now carries a deprecation warning
targeting January 2027 removal"
* tag 'vfs-7.0-rc1.initrd' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
init: remove /proc/sys/kernel/real-root-dev
initrd: remove deprecated code path (linuxrc)
init: remove deprecated "load_ramdisk" and "prompt_ramdisk" command line parameters
|
|
The following warnings were visible:
$ ./scripts/kernel-doc -Wall -none \
net/mptcp/ include/net/mptcp.h include/uapi/linux/mptcp*.h \
include/trace/events/mptcp.h
Warning: net/mptcp/token.c:108 No description found for return value of 'mptcp_token_new_request'
Warning: net/mptcp/token.c:151 No description found for return value of 'mptcp_token_new_connect'
Warning: net/mptcp/token.c:246 No description found for return value of 'mptcp_token_get_sock'
Warning: net/mptcp/token.c:298 No description found for return value of 'mptcp_token_iter_next'
Warning: net/mptcp/protocol.c:4431 No description found for return value of 'mptcp_splice_read'
Warning: include/uapi/linux/mptcp_pm.h:13 missing initial short description on line:
* enum mptcp_event_type
Address all of them: either by using the 'Return:' keyword, or by adding
a missing initial short description.
The MPTCP CI will soon report issues with kdoc to avoid introducing new
issues and being flagged by the Netdev CI.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260205-net-mptcp-misc-fixes-6-19-rc8-v2-3-c2720ce75c34@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability (Qiang Yu)
- Add dw_pcie_remove_capability() and dw_pcie_remove_ext_capability() to
remove Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities for DWC controllers in platforms that
can't support them, so we automatically fall back to INTx (Qiang Yu)
- Remove MSI-X and DPC Capabilities for Qualcomm platforms that advertise
but don't support them (Qiang Yu)
- Remove duplicate dw_pcie_ep_hide_ext_capability() function and replace
with dw_pcie_remove_ext_capability() (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status for
drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if link
is not up to avoid an unnecessary timeout (Manivannan Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up IRQs to
trigger enumeration instead of waiting for link to be up because the PCI
core doesn't allocate bus number space for hierarchies that might be
attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming it
dynamically, which is slow and racy with respect to other concurrent
traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Make dw_pcie_ltssm_status_string() available and use it for logging
errors in dw_pcie_wait_for_link() (Manivannan Sadhasivam)
- Return -ENODEV when dw_pcie_wait_for_link() finds no devices, -EIO for
device present but inactive, -ETIMEDOUT for other failures, so callers
can handle these cases differently (Manivannan Sadhasivam)
- Allow DWC host controller driver probe to continue if device is not found
or found but inactive; only fail when there's an error with the link
(Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers are
not accessible after PME_Turn_Off, simply wait 10ms instead of polling
for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA ranges when
necessary instead of failing (Samuel Holland)
- Rename struct dw_pcie_rp.has_msi_ctrl to .use_imsi_rx for clarity (Qiang
Yu)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint Controllers that
can update BAR inbound address translation without requiring EPF driver
to clear/reset the BAR first, and advertise it for DWC-based Endpoints
(Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that can
map multiple independent inbound regions in a single BAR, implement
subrange mapping, advertise it for DWC-based Endpoints, and add Endpoint
selftests for it (Koichiro Den)
- Allow overriding default BAR sizes for pci-epf-test (Niklas Cassel)
- Make resizable BARs work for Endpoint multi-PF configurations; previously
it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings, and
Address Match Mode (Aksh Garg)
- Fix issues with outbound iATU index assignment that caused iATU index to
be out of bounds (Niklas Cassel)
- Clean up iATU index tracking to be consistent (Niklas Cassel)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound windows
weren't programmed, and ECAM-related iATU entries weren't restored after
suspend/resume, so config accesses failed (Krishna Chaitanya Chundru)
* pci/controller/dwc:
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
PCI: dwc: Fix msg_atu_index assignment
PCI: dwc: ep: Add comment explaining controller level PTM access in multi PF setup
PCI: dwc: ep: Add per-PF BAR and inbound ATU mapping support
PCI: dwc: ep: Fix resizable BAR support for multi-PF configurations
PCI: endpoint: pci-epf-test: Allow overriding default BAR sizes
selftests: pci_endpoint: Add BAR subrange mapping test case
misc: pci_endpoint_test: Add BAR subrange mapping test case
PCI: endpoint: pci-epf-test: Add BAR subrange mapping test support
Documentation: PCI: endpoint: Clarify pci_epc_set_bar() usage
PCI: dwc: ep: Support BAR subrange inbound mapping via Address Match Mode iATU
PCI: dwc: Advertise dynamic inbound mapping support
PCI: endpoint: Add BAR subrange mapping support
PCI: endpoint: Add dynamic_inbound_mapping EPC feature
PCI: dwc: Rename dw_pcie_rp::has_msi_ctrl to dw_pcie_rp::use_imsi_rx for clarity
PCI: dwc: Fix grammar and formatting for comment in dw_pcie_remove_ext_capability()
PCI: dwc: Use multiple iATU windows for mapping large bridge windows and DMA ranges
PCI: dwc: Remove duplicate dw_pcie_ep_hide_ext_capability() function
PCI: dwc: Skip waiting for L2/L3 Ready if dw_pcie_rp::skip_l23_wait is true
PCI: dwc: Fail dw_pcie_host_init() if dw_pcie_wait_for_link() returns -ETIMEDOUT
PCI: dwc: Rework the error print of dw_pcie_wait_for_link()
PCI: dwc: Rename and move ltssm_status_string() to pcie-designware.c
PCI: dwc: Return -EIO from dw_pcie_wait_for_link() if device is not active
PCI: dwc: Return -ENODEV from dw_pcie_wait_for_link() if device is not found
PCI: dwc: Use cfg0_base as iMSI-RX target address to support 32-bit MSI devices
PCI: dwc: ep: Cache MSI outbound iATU mapping
Revert "PCI: dwc: Don't wait for link up if driver can detect Link Up event"
Revert "PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt"
Revert "PCI: qcom: Enable MSI interrupts together with Link up if 'Global IRQ' is supported"
Revert "PCI: qcom: Don't wait for link if we can detect Link Up"
Revert "PCI: dw-rockchip: Enumerate endpoints based on dll_link_up IRQ"
Revert "PCI: dw-rockchip: Don't wait for link since we can detect Link Up"
PCI: dwc: Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if link is not up
PCI: dw-rockchip: Change get_ltssm() to provide L1 Substates info
PCI: dwc: Add L1 Substates context to ltssm_status of debugfs
PCI: qcom: Remove DPC Extended Capability
PCI: qcom: Remove MSI-X Capability for Root Ports
PCI: dwc: Remove MSI/MSIX capability for Root Port if iMSI-RX is used as MSI controller
PCI: dwc: Add new APIs to remove standard and extended Capability
PCI: Add preceding capability position support in PCI_FIND_NEXT_*_CAP macros
|
|
- Add generic RAS tracepoint for hotplug events (Shuai Xue)
- Add RAS tracepoint for link speed changes (Shuai Xue)
* pci/trace:
Documentation: tracing: Add PCI tracepoint documentation
PCI: trace: Add RAS tracepoint to monitor link speed changes
PCI: trace: Add generic RAS tracepoint for hotplug event
|
|
- Move ABI requirement next to each access right to prepare adding more
access rights;
- Mention the possibility to remove the random component of a socket's
ephemeral port choice within the netns-wide ephemeral port range,
since it allows choosing the "random" ephemeral port.
Signed-off-by: Matthieu Buffet <matthieu@buffet.re>
Link: https://lore.kernel.org/r/20251212163704.142301-2-matthieu@buffet.re
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Introduce the LANDLOCK_RESTRICT_SELF_TSYNC flag. With this flag, a
given Landlock ruleset is applied to all threads of the calling
process, instead of only the current one.
Without this flag, multithreaded userspace programs currently resort
to using the nptl(7)/libpsx hack for multithreaded policy enforcement,
which is also used by libcap and for setuid(2). Using this
userspace-based scheme, the threads of a process enforce the same
Landlock policy, but the resulting Landlock domains are still
separate. The domains being separate causes multiple problems:
* When using Landlock's "scoped" access rights, the domain identity is
used to determine whether an operation is permitted. As a result,
when using LANLDOCK_SCOPE_SIGNAL, signaling between sibling threads
stops working. This is a problem for programming languages and
frameworks which are inherently multithreaded (e.g. Go).
* In audit logging, the domains of separate threads in a process will
get logged with different domain IDs, even when they are based on
the same ruleset FD, which might confuse users.
Cc: Andrew G. Morgan <morgan@kernel.org>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Paul Moore <paul@paul-moore.com>
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20251127115136.3064948-2-gnoack@google.com
[mic: Fix restrict_self_flags test, clean up Makefile, allign comments,
reduce local variable scope, add missing includes]
Closes: https://github.com/landlock-lsm/linux/issues/2
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Currently io_uring supports restricting operations on a per-ring basis.
To use those, the ring must be setup in a disabled state by setting
IORING_SETUP_R_DISABLED. Then restrictions can be set for the ring, and
the ring can then be enabled.
This commit adds support for IORING_REGISTER_RESTRICTIONS with ring_fd
== -1, like the other "blind" register opcodes which work on the task
rather than a specific ring. This allows registration of the same kind
of restrictions as can been done on a specific ring, but with the task
itself. Once done, any ring created will inherit these restrictions.
If a restriction filter is registered with a task, then it's inherited
on fork for its children. Children may only further restrict operations,
not extend them.
Inheriting restrictions include both the classic
IORING_REGISTER_RESTRICTIONS based restrictions, as well as the BPF
filters that have been registered with the task via
IORING_REGISTER_BPF_FILTER.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
'core' into next
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Some more changes, including pulls from drivers:
- ath drivers: small features/cleanups
- rtw drivers: mostly refactoring for rtw89 RTL8922DE support
- mac80211: use hrtimers for CAC to avoid too long delays
- cfg80211/mac80211: some initial UHR (Wi-Fi 8) support
* tag 'wireless-next-2026-02-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (59 commits)
wifi: brcmsmac: phy: Remove unreachable error handling code
wifi: mac80211: Add eMLSR/eMLMR action frame parsing support
wifi: mac80211: add initial UHR support
wifi: cfg80211: add initial UHR support
wifi: ieee80211: add some initial UHR definitions
wifi: mac80211: use wiphy_hrtimer_work for CAC timeout
wifi: mac80211: correct ieee80211-{s1g/eht}.h include guard comments
wifi: ath12k: clear stale link mapping of ahvif->links_map
wifi: ath12k: Add support TX hardware queue stats
wifi: ath12k: Add support RX PDEV stats
wifi: ath12k: Fix index decrement when array_len is zero
wifi: ath12k: support OBSS PD configuration for AP mode
wifi: ath12k: add WMI support for spatial reuse parameter configuration
dt-bindings: net: wireless: ath11k-pci: deprecate 'firmware-name' property
wifi: ath11k: add usecase firmware handling based on device compatible
wifi: ath10k: sdio: add missing lock protection in ath10k_sdio_fw_crashed_dump()
wifi: ath10k: fix lock protection in ath10k_wmi_event_peer_sta_ps_state_chg()
wifi: ath10k: snoc: support powering on the device via pwrseq
wifi: rtw89: pci: warn if SPS OCP happens for RTL8922DE
wifi: rtw89: pci: restore LDO setting after device resume
...
====================
Link: https://patch.msgid.link/20260204121143.181112-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add 2-bit tcpi_ecn_mode feild within tcp_info to indicate which ECN
mode is negotiated: ECN_MODE_DISABLED, ECN_MODE_RFC3168, ECN_MODE_ACCECN,
or ECN_MODE_PENDING. This is done by utilizing available bits from
tcpi_accecn_opt_seen (reduced from 16 bits to 2 bits) and
tcpi_accecn_fail_mode (reduced from 16 bits to 4 bits).
Also, an extra 24-bit tcpi_options2 field is identified to represent
newer options and connection features, as all 8 bits of tcpi_options
field have been used.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-14-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Update to avoid conflicts with /urgent patches.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
If we encounter a filesystem with the remap-tree incompat flag set,
validate its compatibility with the other flags, and load the remap tree
using the values that have been added to the superblock.
The remap-tree feature depends on the free-space-tree, but no-holes and
block-group-tree have been made dependencies to reduce the testing
matrix. Similarly I'm not aware of any reason why mixed-bg and zoned would be
incompatible with remap-tree, but this is blocked for the time being
until it can be fully tested.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a struct btrfs_block_group_item_v2, which is used in the block group
tree if the remap-tree incompat flag is set.
This adds two new fields to the block group item: `remap_bytes` and
`identity_remap_count`.
`remap_bytes` records the amount of data that's physically within this
block group, but nominally in another, remapped block group. This is
necessary because this data will need to be moved first if this block
group is itself relocated. If `remap_bytes` > 0, this is an indicator to
the relocation thread that it will need to search the remap-tree for
backrefs. A block group must also have `remap_bytes` == 0 before it can
be dropped.
`identity_remap_count` records how many identity remap items are located
in the remap tree for this block group. When relocation is begun for
this block group, this is set to the number of holes in the free-space
tree for this range. As identity remaps are converted into actual remaps
by the relocation process, this number is decreased. Once it reaches 0,
either because of relocation or because extents have been deleted, the
block group has been fully remapped and its chunk's device extents are
removed.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a new METADATA_REMAP chunk type, which is a metadata chunk that holds the
remap tree.
This is needed for bootstrapping purposes: the remap tree can't itself
be remapped, and must be relocated the existing way, by COWing every
leaf. The remap tree can't go in the SYSTEM chunk as space there is
limited, because a copy of the chunk item gets placed in the superblock.
The changes in fs/btrfs/volumes.h are because we're adding a new block
group type bit after the profile bits, and so can no longer rely on the
const_ilog2 trick.
The sizing to 32MB per chunk, matching the SYSTEM chunk, is an estimate
here, we can adjust it later if it proves to be too big or too small.
This works out to be ~500,000 remap items, which for a 4KB block size
covers ~2GB of remapped data in the worst case and ~500TB in the best case.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add an incompat flag for the new remap-tree feature, and the constants
and definitions needed to support it.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add optional support for device notifications in VMClock. When
supported, the hypervisor will send a device notification every time it
updates the seq_count to a new even value.
Moreover, add support for poll() in VMClock as a means to propagate this
notification to user space. poll() will return a POLLIN event to
listeners every time seq_count changes to a value different than the one
last seen (since open() or last read()/pread()). This means that when
poll() returns a POLLIN event, listeners need to use read() to observe
what has changed and update the reader's view of seq_count. In other
words, after a poll() returned, all subsequent calls to poll() will
immediately return with a POLLIN event until the listener calls read().
The device advertises support for the notification mechanism by setting
flag VMCLOCK_FLAG_NOTIFICATION_PRESENT in vmclock_abi flags field. If
the flag is not present the driver won't setup the ACPI notification
handler and poll() will always immediately return POLLHUP.
Signed-off-by: Babis Chalios <bchalios@amazon.es>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Takahiro Itazuri <itazur@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Takahiro Itazuri <itazur@amazon.com>
Link: https://patch.msgid.link/20260130173704.12575-3-itazur@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to live migration, loading a VM from some saved state (aka
snapshot) is also an event that calls for clock adjustments in the
guest. However, guests might want to take more actions as a response to
such events, e.g. as discarding UUIDs, resetting network connections,
reseeding entropy pools, etc. These are actions that guests don't
typically take during live migration, so add a new field in the
vmclock_abi called vm_generation_counter which informs the guest about
such events.
Hypervisor advertises support for vm_generation_counter through the
VMCLOCK_FLAG_VM_GEN_COUNTER_PRESENT flag. Users need to check the
presence of this bit in vmclock_abi flags field before using this flag.
Signed-off-by: Babis Chalios <bchalios@amazon.es>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Takahiro Itazur <itazur@amazon.com>
Link: https://patch.msgid.link/20260130173704.12575-2-itazur@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add initial support for making UHR connections (or suppressing
that), adding UHR capable stations on the AP side, encoding
and decoding UHR MCSes (except rate calculation for the new
MCSes 17, 19, 20 and 23) as well as regulatory support.
Link: https://patch.msgid.link/20260130164259.54cc12fbb307.I26126bebd83c7ab17e99827489f946ceabb3521f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.20-2026-01-30:
amdgpu:
- Misc cleanups
- SMU 13 fixes
- SMU 14 fixes
- GPUVM fault filter fix
- USB4 fixes
- DC FP guard fixes
- Powergating fix
- JPEG ring reset fix
- RAS fixes
- Xclk fix for soc21 APUs
- Fix COND_EXEC handling for GC 11
- UserQ fixes
- MQD size alignment fixes
- SMU feature interface cleanup
- GC 10-12 KGQ init fixes
- GC 11-12 KGQ reset fixes
amdkfd:
- Fix device snapshot reporting
- GC 12.1 trap handler fixes
- MQD size alignment fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260130183257.28879-1-alexander.deucher@amd.com
|
|
Add a new feature flag UBLK_F_NO_AUTO_PART_SCAN to allow users to suppress
automatic partition scanning when starting a ublk device.
This is useful for some cases in which user don't want to scan
partitions.
Users still can manually trigger partition scanning later when appropriate
using standard tools (e.g., partprobe, blockdev --rereadpt).
Reported-by: Yoav Cohen <yoav@nvidia.com>
Link: https://lore.kernel.org/linux-block/DM4PR12MB63280C5637917C071C2F0D65A9A8A@DM4PR12MB6328.namprd12.prod.outlook.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Another fairly large set of changes, notably:
- cfg80211/mac80211
- most of EPPKE/802.1X over auth frames support
- additional FTM capabilities
- split up drop reasons better, removing generic RX_DROP
- NAN cleanups/fixes
- ath11k:
- support for Channel Frequency Response measurement
- ath12k:
- support for the QCC2072 chipset
- iwlwifi:
- partial NAN support
- UNII-9 support
- some UHR/802.11bn FW APIs
- remove most of MLO/EHT from iwlmvm
(such devices use iwlmld)
- rtw89:
- preparations for RTL8922DE support
* tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (184 commits)
wifi: iwlegacy: add missing mutex protection in il4965_store_tx_power()
wifi: iwlegacy: add missing mutex protection in il3945_store_measurement()
wifi: mac80211: use u64_stats_t with u64_stats_sync properly
wifi: p54: Fix memory leak in p54_beacon_update()
wifi: cfg80211: treat deprecated INDOOR_SP_AP_OLD control value as LPI mode
wifi: rtw88: sdio: Migrate to use sdio specific shutdown function
wifi: rsi: sdio: Migrate to use sdio specific shutdown function
sdio: Provide a bustype shutdown function
wifi: nl80211/cfg80211: support operating as RSTA in PMSR FTM request
wifi: nl80211/cfg80211: add negotiated burst period to FTM result
wifi: nl80211/cfg80211: clarify periodic FTM parameters for non-EDCA based ranging
wifi: nl80211/cfg80211: add new FTM capabilities
wifi: iwlwifi: rename struct iwl_mcc_allowed_ap_type_cmd::offset_map
wifi: iwlwifi: mvm: Remove link_id from time_events
wifi: iwlwifi: mld: change cluster_id type to u8 array
wifi: iwlwifi: support V13 of iwl_lari_config_change_cmd
wifi: iwlwifi: split bios_value_u32 to separate the header
wifi: iwlwifi: uefi: cache the DSM functions
wifi: iwlwifi: acpi: cache the DSM functions
wifi: iwlwifi: mvm: Cleanup MLO code
...
====================
Link: https://patch.msgid.link/20260129110136.176980-39-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the dpll subsystem exports the fractional frequency offset
(FFO) in parts per million (ppm). This granularity is insufficient for
high-precision synchronization scenarios which often require parts per
trillion (ppt) resolution.
Add a new netlink attribute DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET_PPT
to expose the FFO in ppt.
Update the dpll netlink core to expect the driver-provided FFO value
to be in ppt. To maintain backward compatibility with existing userspace
tools, populate the legacy DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET
attribute by dividing the new ppt value by 1,000,000.
Update the zl3073x and mlx5 drivers to provide the FFO value in ppt:
- zl3073x: adjust the fixed-point calculation to produce ppt (10^12)
instead of ppm (10^6).
- mlx5: scale the existing ppm value by 1,000,000.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260126162253.27890-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc8).
No adjacent changes, conflicts:
drivers/net/ethernet/spacemit/k1_emac.c
2c84959167d64 ("net: spacemit: Check for netif_carrier_ok() in emac_stats_update()")
f66086798f91f ("net: spacemit: Remove broken flow control support")
https://lore.kernel.org/aXjAqZA3iEWD_DGM@sirena.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new PCITEST_BAR_SUBRANGE ioctl to exercise EPC BAR subrange
mapping end-to-end.
The test programs a simple 2-subrange layout on the endpoint (via
pci-epf-test) and verifies that:
- the endpoint-provided per-subrange signature bytes are observed at
the expected PCIe BAR offsets, and
- writes to each subrange are routed to the correct backing region
(i.e. the submap order is applied rather than accidentally working
due to an identity mapping).
Return -EOPNOTSUPP when the endpoint does not advertise subrange
mapping, -ENODATA when the BAR is disabled, and -EBUSY when the BAR is
reserved for the test register space.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260124145012.2794108-8-den@valinux.co.jp
|
|
Linux 6.19-rc7
This is needed for msm and rust trees.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Add additional capabilities reporting.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
uapi/linux/pci_regs.h defines Primary/Secondary/Subordinate Bus Numbers
and Secondary Latency Timer (PCIe r7.0, sec. 7.5.1.3) as byte register
offsets, but in practice the code may read/write the entire dword. In the
lack of #defines to handle the dword fields, the code ends up using
literals which are not as easy to read.
Add dword field masks for the Bus Number and Secondary Latency Timer
fields and use them in probe.c.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash new #defines and uses together]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251219174036.16738-21-ilpo.jarvinen@linux.intel.com
Link: https://patch.msgid.link/20251219174036.16738-22-ilpo.jarvinen@linux.intel.com
|
|
This adds custom filtering for IORING_OP_OPENAT and IORING_OP_OPENAT2,
where the open_how flags, mode, and resolve can be checked by filters.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Example population method for the BPF based opcode filtering. This
exposes the socket family, type, and protocol to a registered BPF
filter. This in turn enables the filter to make decisions based on
what was passed in to the IORING_OP_SOCKET request type.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for loading classic BPF programs with io_uring to provide
fine-grained filtering of SQE operations. Unlike
IORING_REGISTER_RESTRICTIONS which only allows bitmap-based allow/deny
of opcodes, BPF filters can inspect request attributes and make dynamic
decisions.
The filter is registered via IORING_REGISTER_BPF_FILTER with a struct
io_uring_bpf:
struct io_uring_bpf_filter {
__u32 opcode; /* io_uring opcode to filter */
__u32 flags;
__u32 filter_len; /* number of BPF instructions */
__u32 resv;
__u64 filter_ptr; /* pointer to BPF filter */
__u64 resv2[5];
};
enum {
IO_URING_BPF_CMD_FILTER = 1,
};
struct io_uring_bpf {
__u16 cmd_type; /* IO_URING_BPF_* values */
__u16 cmd_flags; /* none so far */
__u32 resv;
union {
struct io_uring_bpf_filter filter;
};
};
and the filters get supplied a struct io_uring_bpf_ctx:
struct io_uring_bpf_ctx {
__u64 user_data;
__u8 opcode;
__u8 sqe_flags;
__u8 pdu_size;
__u8 pad[5];
};
where it's possible to filter on opcode and sqe_flags, with pdu_size
indicating how much extra data is being passed in beyond the pad field.
This will used for specific finer grained filtering inside an opcode.
An example of that for sockets is in one of the following patches.
Anything the opcode supports can end up in this struct, populated by
the opcode itself, and hence can be filtered for.
Filters have the following semantics:
- Return 1 to allow the request
- Return 0 to deny the request with -EACCES
- Multiple filters can be stacked per opcode. All filters must
return 1 for the opcode to be allowed.
- Filters are evaluated in registration order (most recent first)
The implementation uses classic BPF (cBPF) rather than eBPF for as
that's required for containers, and since they can be used by any
user in the system.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
