summaryrefslogtreecommitdiff
path: root/include/uapi
AgeCommit message (Collapse)Author
2023-03-11usb: uvc: Enumerate valid values for color matchingDaniel Scally
[ Upstream commit e16cab9c1596e251761d2bfb5e1467950d616963 ] The color matching descriptors defined in the UVC Specification contain 3 fields with discrete numeric values representing particular settings. Enumerate those values so that later code setting them can be more readable. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Link: https://lore.kernel.org/r/20230202114142.300858-2-dan.scally@ideasonboard.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11media: uvcvideo: Silence memcpy() run-time false positive warningsKees Cook
[ Upstream commit b839212988575c701aab4d3d9ca15e44c87e383c ] The memcpy() in uvc_video_decode_meta() intentionally copies across the length and flags members and into the trailing buf flexible array. Split the copy so that the compiler can better reason about (the lack of) buffer overflows here. Avoid the run-time false positive warning: memcpy: detected field-spanning write (size 12) of single field "&meta->length" at drivers/media/usb/uvc/uvc_video.c:1355 (size 1) Additionally fix a typo in the documentation for struct uvc_meta_buf. Reported-by: ionut_n2001@yahoo.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=216810 Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-06netfilter: conntrack: unify established states for SCTP pathsSriram Yagnaraman
commit a44b7651489f26271ac784b70895e8a85d0cebf4 upstream. An SCTP endpoint can start an association through a path and tear it down over another one. That means the initial path will not see the shutdown sequence, and the conntrack entry will remain in ESTABLISHED state for 5 days. By merging the HEARTBEAT_ACKED and ESTABLISHED states into one ESTABLISHED state, there remains no difference between a primary or secondary path. The timeout for the merged ESTABLISHED state is set to 210 seconds (hb_interval * max_path_retrans + rto_max). So, even if a path doesn't see the shutdown sequence, it will expire in a reasonable amount of time. With this change in place, there is now more than one state from which we can transition to ESTABLISHED, COOKIE_ECHOED and HEARTBEAT_SENT, so handle the setting of ASSURED bit whenever a state change has happened and the new state is ESTABLISHED. Removed the check for dir==REPLY since the transition to ESTABLISHED can happen only in the reply direction. Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18include/uapi/linux/swab: Fix potentially missing __always_inlineMatt Redfearn
[ Upstream commit defbab270d45e32b068e7e73c3567232d745c60f ] Commit bc27fb68aaad ("include/uapi/linux/byteorder, swab: force inlining of some byteswap operations") added __always_inline to swab functions and commit 283d75737837 ("uapi/linux/stddef.h: Provide __always_inline to userspace headers") added a definition of __always_inline for use in exported headers when the kernel's compiler.h is not available. However, since swab.h does not include stddef.h, if the header soup does not indirectly include it, the definition of __always_inline is missing, resulting in a compilation failure, which was observed compiling the perf tool using exported headers containing this commit: In file included from /usr/include/linux/byteorder/little_endian.h:12:0, from /usr/include/asm/byteorder.h:14, from tools/include/uapi/linux/perf_event.h:20, from perf.h:8, from builtin-bench.c:18: /usr/include/linux/swab.h:160:8: error: unknown type name `__always_inline' static __always_inline __u16 __swab16p(const __u16 *p) Fix this by replacing the inclusion of linux/compiler.h with linux/stddef.h to ensure that we pick up that definition if required, without relying on it's indirect inclusion. compiler.h is then included indirectly, via stddef.h. Fixes: 283d75737837 ("uapi/linux/stddef.h: Provide __always_inline to userspace headers") Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Petr Vaněk <arkamar@atlas.cz> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18ALSA: seq: fix undefined behavior in bit shift for SNDRV_SEQ_FILTER_USE_EVENTBaisong Zhong
[ Upstream commit cf59e1e4c79bf741905484cdb13c130b53576a16 ] Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in sound/core/seq/seq_clientmgr.c:509:22 left shift of 1 by 31 places cannot be represented in type 'int' ... Call Trace: <TASK> dump_stack_lvl+0x8d/0xcf ubsan_epilogue+0xa/0x44 __ubsan_handle_shift_out_of_bounds+0x1e7/0x208 snd_seq_deliver_single_event.constprop.21+0x191/0x2f0 snd_seq_deliver_event+0x1a2/0x350 snd_seq_kernel_client_dispatch+0x8b/0xb0 snd_seq_client_notify_subscription+0x72/0xa0 snd_seq_ioctl_subscribe_port+0x128/0x160 snd_seq_kernel_client_ctl+0xce/0xf0 snd_seq_oss_create_client+0x109/0x15b alsa_seq_oss_init+0x11c/0x1aa do_one_initcall+0x80/0x440 kernel_init_freeable+0x370/0x3c3 kernel_init+0x1b/0x190 ret_from_fork+0x1f/0x30 </TASK> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com> Link: https://lore.kernel.org/r/20221121111630.3119259-1-zhongbaisong@huawei.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08audit: fix undefined behavior in bit shift for AUDIT_BITGaosheng Cui
[ Upstream commit 986d93f55bdeab1cac858d1e47b41fac10b2d7f6 ] Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in kernel/auditfilter.c:179:23 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c audit_register_class+0x9d/0x137 audit_classes_init+0x4d/0xb8 do_one_initcall+0x76/0x430 kernel_init_freeable+0x3b3/0x422 kernel_init+0x24/0x1e0 ret_from_fork+0x1f/0x30 </TASK> Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> [PM: remove bad 'Fixes' tag as issue predates git, added in v2.6.6-rc1] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25capabilities: fix undefined behavior in bit shift for CAP_TO_MASKGaosheng Cui
[ Upstream commit 46653972e3ea64f79e7f8ae3aa41a4d3fdb70a13 ] Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in security/commoncap.c:1252:2 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c cap_task_prctl+0x561/0x6f0 security_task_prctl+0x5a/0xb0 __x64_sys_prctl+0x61/0x8f0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> Fixes: e338d263a76a ("Add 64-bit capability support to the kernel") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Acked-by: Andrew G. Morgan <morgan@kernel.org> Reviewed-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03media: videodev2.h: V4L2_DV_BT_BLANKING_HEIGHT should check 'interlaced'Hans Verkuil
[ Upstream commit 8da7f0976b9071b528c545008de9d10cc81883b1 ] If it is a progressive (non-interlaced) format, then ignore the interlaced timing values. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 7f68127fa11f ([media] videodev2.h: defines to calculate blanking and frame sizes) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25can: error: specify the values of data[5..7] of CAN error framesVincent Mailhol
[ Upstream commit e70a3263a7eed768d5f947b8f2aff8d2a79c9d97 ] Currently, data[5..7] of struct can_frame, when used as a CAN error frame, are defined as being "controller specific". Device specific behaviours are problematic because it prevents someone from writing code which is portable between devices. As a matter of fact, data[5] is never used, data[6] is always used to report TX error counter and data[7] is always used to report RX error counter. can-utils also relies on this. This patch updates the comment in the uapi header to specify that data[5] is reserved (and thus should not be used) and that data[6..7] are used for error counters. Fixes: 0d66548a10cb ("[CAN]: Add PF_CAN core module") Link: https://lore.kernel.org/all/20220719143550.3681-11-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22random: ignore GRND_RANDOM in getentropy(2)Andy Lutomirski
commit 48446f198f9adcb499b30332488dfd5bc3f176f6 upstream. The separate blocking pool is going away. Start by ignoring GRND_RANDOM in getentropy(2). This should not materially break any API. Any code that worked without this change should work at least as well with this change. Signed-off-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/705c5a091b63cc5da70c99304bb97e0109be0a26.1577088521.git.luto@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-22random: add GRND_INSECURE to return best-effort non-cryptographic bytesAndy Lutomirski
commit 75551dbf112c992bc6c99a972990b3f272247e23 upstream. Signed-off-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/d5473b56cf1fa900ca4bd2b3fc1e5b8874399919.1577088521.git.luto@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25dma-buf: fix use of DMA_BUF_SET_NAME_{A,B} in userspaceJérôme Pouiller
commit 7c3e9fcad9c7d8bb5d69a576044fb16b1d2e8a01 upstream. The typedefs u32 and u64 are not available in userspace. Thus user get an error he try to use DMA_BUF_SET_NAME_A or DMA_BUF_SET_NAME_B: $ gcc -Wall -c -MMD -c -o ioctls_list.o ioctls_list.c In file included from /usr/include/x86_64-linux-gnu/asm/ioctl.h:1, from /usr/include/linux/ioctl.h:5, from /usr/include/asm-generic/ioctls.h:5, from ioctls_list.c:11: ioctls_list.c:463:29: error: ‘u32’ undeclared here (not in a function) 463 | { "DMA_BUF_SET_NAME_A", DMA_BUF_SET_NAME_A, -1, -1 }, // linux/dma-buf.h | ^~~~~~~~~~~~~~~~~~ ioctls_list.c:464:29: error: ‘u64’ undeclared here (not in a function) 464 | { "DMA_BUF_SET_NAME_B", DMA_BUF_SET_NAME_B, -1, -1 }, // linux/dma-buf.h | ^~~~~~~~~~~~~~~~~~ The issue was initially reported here[1]. [1]: https://github.com/jerome-pouiller/ioctl/pull/14 Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Reviewed-by: Christian König <christian.koenig@amd.com> Fixes: a5bff92eaac4 ("dma-buf: Fix SET_NAME ioctl uapi") CC: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20220517072708.245265-1-Jerome.Pouiller@silabs.com Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15bpf: Make dst_port field in struct bpf_sock 16-bit wideJakub Sitnicki
[ Upstream commit 4421a582718ab81608d8486734c18083b822390d ] Menglong Dong reports that the documentation for the dst_port field in struct bpf_sock is inaccurate and confusing. From the BPF program PoV, the field is a zero-padded 16-bit integer in network byte order. The value appears to the BPF user as if laid out in memory as so: offsetof(struct bpf_sock, dst_port) + 0 <port MSB> + 8 <port LSB> +16 0x00 +24 0x00 32-, 16-, and 8-bit wide loads from the field are all allowed, but only if the offset into the field is 0. 32-bit wide loads from dst_port are especially confusing. The loaded value, after converting to host byte order with bpf_ntohl(dst_port), contains the port number in the upper 16-bits. Remove the confusion by splitting the field into two 16-bit fields. For backward compatibility, allow 32-bit wide loads from offsetof(struct bpf_sock, dst_port). While at it, allow loads 8-bit loads at offset [0] and [1] from dst_port. Reported-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/r/20220130115518.213259-2-jakub@cloudflare.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15bpf: Fix comment for helper bpf_current_task_under_cgroup()Hengqi Chen
commit 58617014405ad5c9f94f464444f4972dabb71ca7 upstream. Fix the descriptions of the return values of helper bpf_current_task_under_cgroup(). Fixes: c6b5fb8690fa ("bpf: add documentation for eBPF helpers (42-50)") Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220310155335.1278783-1-hengqi.chen@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08HID: add mapping for KEY_ALL_APPLICATIONSWilliam Mahon
commit 327b89f0acc4c20a06ed59e4d9af7f6d804dc2e2 upstream. This patch adds a new key definition for KEY_ALL_APPLICATIONS and aliases KEY_DASHBOARD to it. It also maps the 0x0c/0x2a2 usage code to KEY_ALL_APPLICATIONS. Signed-off-by: William Mahon <wmahon@chromium.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20220303035618.1.I3a7746ad05d270161a18334ae06e3b6db1a1d339@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08HID: add mapping for KEY_DICTATEWilliam Mahon
commit bfa26ba343c727e055223be04e08f2ebdd43c293 upstream. Numerous keyboards are adding dictate keys which allows for text messages to be dictated by a microphone. This patch adds a new key definition KEY_DICTATE and maps 0x0c/0x0d8 usage code to this new keycode. Additionally hid-debug is adjusted to recognize this new usage code as well. Signed-off-by: William Mahon <wmahon@chromium.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20220303021501.1.I5dbf50eb1a7a6734ee727bda4a8573358c6d3ec0@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08xfrm: enforce validity of offload input flagsLeon Romanovsky
commit 7c76ecd9c99b6e9a771d813ab1aa7fa428b3ade1 upstream. struct xfrm_user_offload has flags variable that received user input, but kernel didn't check if valid bits were provided. It caused a situation where not sanitized input was forwarded directly to the drivers. For example, XFRM_OFFLOAD_IPV6 define that was exposed, was used by strongswan, but not implemented in the kernel at all. As a solution, check and sanitize input flags to forward XFRM_OFFLOAD_INBOUND to the drivers. Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-05uapi: fix linux/nfc.h userspace compilation errorsDmitry V. Levin
commit 7175f02c4e5f5a9430113ab9ca0fd0ce98b28a51 upstream. Replace sa_family_t with __kernel_sa_family_t to fix the following linux/nfc.h userspace compilation errors: /usr/include/linux/nfc.h:266:2: error: unknown type name 'sa_family_t' sa_family_t sa_family; /usr/include/linux/nfc.h:274:2: error: unknown type name 'sa_family_t' sa_family_t sa_family; Fixes: 23b7869c0fd0 ("NFC: add the NFC socket raw protocol") Fixes: d646960f7986 ("NFC: Initial LLCP support") Cc: <stable@vger.kernel.org> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-05nfc: uapi: use kernel size_t to fix user-space buildsKrzysztof Kozlowski
commit 79b69a83705e621b258ac6d8ae6d3bfdb4b930aa upstream. Fix user-space builds if it includes /usr/include/linux/nfc.h before some of other headers: /usr/include/linux/nfc.h:281:9: error: unknown type name ‘size_t’ 281 | size_t service_name_len; | ^~~~~~ Fixes: d646960f7986 ("NFC: Initial LLCP support") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14aio: fix use-after-free due to missing POLLFREE handlingEric Biggers
commit 50252e4b5e989ce64555c7aef7516bdefc2fea72 upstream. signalfd_poll() and binder_poll() are special in that they use a waitqueue whose lifetime is the current task, rather than the struct file as is normally the case. This is okay for blocking polls, since a blocking poll occurs within one task; however, non-blocking polls require another solution. This solution is for the queue to be cleared before it is freed, by sending a POLLFREE notification to all waiters. Unfortunately, only eventpoll handles POLLFREE. A second type of non-blocking poll, aio poll, was added in kernel v4.18, and it doesn't handle POLLFREE. This allows a use-after-free to occur if a signalfd or binder fd is polled with aio poll, and the waitqueue gets freed. Fix this by making aio poll handle POLLFREE. A patch by Ramji Jiyani <ramjiyani@google.com> (https://lore.kernel.org/r/20211027011834.2497484-1-ramjiyani@google.com) tried to do this by making aio_poll_wake() always complete the request inline if POLLFREE is seen. However, that solution had two bugs. First, it introduced a deadlock, as it unconditionally locked the aio context while holding the waitqueue lock, which inverts the normal locking order. Second, it didn't consider that POLLFREE notifications are missed while the request has been temporarily de-queued. The second problem was solved by my previous patch. This patch then properly fixes the use-after-free by handling POLLFREE in a deadlock-free way. It does this by taking advantage of the fact that freeing of the waitqueue is RCU-delayed, similar to what eventpoll does. Fixes: 2c14fa838cbe ("aio: implement IOCB_CMD_POLL") Cc: <stable@vger.kernel.org> # v4.18+ Link: https://lore.kernel.org/r/20211209010455.42744-6-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17PCI: Add PCI_EXP_DEVCTL_PAYLOAD_* macrosPali Rohár
commit 460275f124fb072dca218a6b43b6370eebbab20d upstream. Define a macro PCI_EXP_DEVCTL_PAYLOAD_* for every possible Max Payload Size in linux/pci_regs.h, in the same style as PCI_EXP_DEVCTL_READRQ_*. Link: https://lore.kernel.org/r/20211005180952.6812-2-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22fq_codel: reject silly quantum parametersEric Dumazet
[ Upstream commit c7c5e6ff533fe1f9afef7d2fa46678987a1335a7 ] syzbot found that forcing a big quantum attribute would crash hosts fast, essentially using this: tc qd replace dev eth0 root fq_codel quantum 4294967295 This is because fq_codel_dequeue() would have to loop ~2^31 times in : if (flow->deficit <= 0) { flow->deficit += q->quantum; list_move_tail(&flow->flowchain, &q->old_flows); goto begin; } SFQ max quantum is 2^19 (half a megabyte) Lets adopt a max quantum of one megabyte for FQ_CODEL. Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22serial: 8250: Define RX trigger levels for OxSemi 950 devicesMaciej W. Rozycki
[ Upstream commit d7aff291d069c4418285f3c8ee27b0ff67ce5998 ] Oxford Semiconductor 950 serial port devices have a 128-byte FIFO and in the enhanced (650) mode, which we select in `autoconfig_has_efr' with the ECB bit set in the EFR register, they support the receive interrupt trigger level selectable with FCR bits 7:6 from the set of 16, 32, 112, 120. This applies to the original OX16C950 discrete UART[1] as well as 950 cores embedded into more complex devices. For these devices we set the default to 112, which sets an excessively high level of 112 or 7/8 of the FIFO capacity, unlike with other port types where we choose at most 1/2 of their respective FIFO capacities. Additionally we don't make the trigger level configurable. Consequently frequent input overruns happen with high bit rates where hardware flow control cannot be used (e.g. terminal applications) even with otherwise highly-performant systems. Lower the default receive interrupt trigger level to 32 then, and make it configurable. Document the trigger levels along with other port types, including the set of 16, 32, 64, 112 for the transmit interrupt as well[2]. References: [1] "OX16C950 rev B High Performance UART with 128 byte FIFOs", Oxford Semiconductor, Inc., DS-0031, Sep 05, Table 10: "Receiver Trigger Levels", p. 22 [2] same, Table 9: "Transmit Interrupt Trigger Levels", p. 22 Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260608480.37803@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-15bpf: Fix a typo of reuseport map in bpf.h.Kuniyuki Iwashima
[ Upstream commit f170acda7ffaf0473d06e1e17c12cd9fd63904f5 ] Fix s/BPF_MAP_TYPE_REUSEPORT_ARRAY/BPF_MAP_TYPE_REUSEPORT_SOCKARRAY/ typo in bpf.h. Fixes: 2dbb9b9e6df6 ("bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20210714124317.67526-1-kuniyu@amazon.co.jp Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19net: fix mistake path for netdev_features_stringsJian Shen
[ Upstream commit 2d8ea148e553e1dd4e80a87741abdfb229e2b323 ] Th_strings arrays netdev_features_strings, tunable_strings, and phy_tunable_strings has been moved to file net/ethtool/common.c. So fixes the comment. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23icmp: don't send out ICMP messages with a source address of 0.0.0.0Toke Høiland-Jørgensen
[ Upstream commit 321827477360934dc040e9d3c626bf1de6c3ab3c ] When constructing ICMP response messages, the kernel will try to pick a suitable source address for the outgoing packet. However, if no IPv4 addresses are configured on the system at all, this will fail and we end up producing an ICMP message with a source address of 0.0.0.0. This can happen on a box routing IPv4 traffic via v6 nexthops, for instance. Since 0.0.0.0 is not generally routable on the internet, there's a good chance that such ICMP messages will never make it back to the sender of the original packet that the ICMP message was sent in response to. This, in turn, can create connectivity and PMTUd problems for senders. Fortunately, RFC7600 reserves a dummy address to be used as a source for ICMP messages (192.0.0.8/32), so let's teach the kernel to substitute that address as a last resort if the regular source address selection procedure fails. Below is a quick example reproducing this issue with network namespaces: ip netns add ns0 ip l add type veth peer netns ns0 ip l set dev veth0 up ip a add 10.0.0.1/24 dev veth0 ip a add fc00:dead:cafe:42::1/64 dev veth0 ip r add 10.1.0.0/24 via inet6 fc00:dead:cafe:42::2 ip -n ns0 l set dev veth0 up ip -n ns0 a add fc00:dead:cafe:42::2/64 dev veth0 ip -n ns0 r add 10.0.0.0/24 via inet6 fc00:dead:cafe:42::1 ip netns exec ns0 sysctl -w net.ipv4.icmp_ratelimit=0 ip netns exec ns0 sysctl -w net.ipv4.ip_forward=1 tcpdump -tpni veth0 -c 2 icmp & ping -w 1 10.1.0.1 > /dev/null tcpdump: verbose output suppressed, use -v[v]... for full protocol decode listening on veth0, link-type EN10MB (Ethernet), snapshot length 262144 bytes IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 29, seq 1, length 64 IP 0.0.0.0 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92 2 packets captured 2 packets received by filter 0 packets dropped by kernel With this patch the above capture changes to: IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 31127, seq 1, length 64 IP 192.0.0.8 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Juliusz Chroboczek <jch@irif.fr> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-18HID: hid-input: add mapping for emoji picker keyDmitry Torokhov
[ Upstream commit 7b229b13d78d112e2c5d4a60a3c6f602289959fa ] HUTRR101 added a new usage code for a key that is supposed to invoke and dismiss an emoji picker widget to assist users to locate and enter emojis. This patch adds a new key definition KEY_EMOJI_PICKER and maps 0x0c/0x0d9 usage code to this new keycode. Additionally hid-debug is adjusted to recognize this new usage code as well. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-19netfilter: xt_SECMARK: add new revision to fix structure layoutPablo Neira Ayuso
[ Upstream commit c7d13358b6a2f49f81a34aa323a2d0878a0532a2 ] This extension breaks when trying to delete rules, add a new revision to fix this. Fixes: 5e6874cdb8de ("[SECMARK]: Add xtables SECMARK target") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14tty: actually undefine superseded ASYNC flagsJohan Hovold
[ Upstream commit d09845e98a05850a8094ea8fd6dd09a8e6824fff ] Some kernel-internal ASYNC flags have been superseded by tty-port flags and should no longer be used by kernel drivers. Fix the misspelled "__KERNEL__" compile guards which failed their sole purpose to break out-of-tree drivers that have not yet been updated. Fixes: 5c0517fefc92 ("tty: core: Undefine ASYNC_* flags superceded by TTY_PORT* flags") Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210407095208.31838-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-11usb: webcam: Invalid size of Processing Unit DescriptorPawel Laszczak
[ Upstream commit 6a154ec9ef6762c774cd2b50215c7a8f0f08a862 ] According with USB Device Class Definition for Video Device the Processing Unit Descriptor bLength should be 12 (10 + bmControlSize), but it has 11. Invalid length caused that Processing Unit Descriptor Test Video form CV tool failed. To fix this issue patch adds bmVideoStandards into uvc_processing_unit_descriptor structure. The bmVideoStandards field was added in UVC 1.1 and it wasn't part of UVC 1.0a. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20210315071748.29706-1-pawell@gli-login.cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-24USB: replace hardcode maximum usb string length by definitionMacpaul Lin
commit 81c7462883b0cc0a4eeef0687f80ad5b5baee5f6 upstream. Replace hardcoded maximum USB string length (126 bytes) by definition "USB_MAX_STRING_LEN". Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/1592471618-29428-1-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17uapi: nfnetlink_cthelper.h: fix userspace compilation errorDmitry V. Levin
commit c33cb0020ee6dd96cc9976d6085a7d8422f6dbed upstream. Apparently, <linux/netfilter/nfnetlink_cthelper.h> and <linux/netfilter/nfnetlink_acct.h> could not be included into the same compilation unit because of a cut-and-paste typo in the former header. Fixes: 12f7a505331e6 ("netfilter: add user-space connection tracking helper infrastructure") Cc: <stable@vger.kernel.org> # v3.6 Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03ICMPv6: Add ICMPv6 Parameter Problem, code 3 definitionHangbin Liu
commit b59e286be280fa3c2e94a0716ddcee6ba02bc8ba upstream. Based on RFC7112, Section 6: IANA has added the following "Type 4 - Parameter Problem" message to the "Internet Control Message Protocol version 6 (ICMPv6) Parameters" registry: CODE NAME/DESCRIPTION 3 IPv6 First Fragment has incomplete IPv6 Header Chain Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Aviraj CJ <acj@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17vfio iommu: Add dma available capabilityMatthew Rosato
[ Upstream commit 7d6e1329652ed971d1b6e0e7bea66fba5044e271 ] The following functional changes were needed for backport: - vfio_iommu_type1_get_info doesn't exist, call vfio_iommu_dma_avail_build_caps from vfio_iommu_type1_ioctl. - As further fallout from this, vfio_iommu_dma_avail_build_caps must acquire and release the iommu mutex lock. To do so, the return value is stored in a local variable as in vfio_iommu_iova_build_caps. Upstream commit description: Commit 492855939bdb ("vfio/type1: Limit DMA mappings per container") added the ability to limit the number of memory backed DMA mappings. However on s390x, when lazy mapping is in use, we use a very large number of concurrent mappings. Let's provide the current allowable number of DMA mappings to userspace via the IOMMU info chain so that userspace can take appropriate mitigation. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-06uapi: move constants from <linux/kernel.h> to <linux/const.h>Petr Vorel
commit a85cbe6159ffc973e5702f70a3bd5185f8f3c38d upstream. and include <linux/const.h> in UAPI headers instead of <linux/kernel.h>. The reason is to avoid indirect <linux/sysinfo.h> include when using some network headers: <linux/netlink.h> or others -> <linux/kernel.h> -> <linux/sysinfo.h>. This indirect include causes on MUSL redefinition of struct sysinfo when included both <sys/sysinfo.h> and some of UAPI headers: In file included from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/kernel.h:5, from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/netlink.h:5, from ../include/tst_netlink.h:14, from tst_crypto.c:13: x86_64-buildroot-linux-musl/sysroot/usr/include/linux/sysinfo.h:8:8: error: redefinition of `struct sysinfo' struct sysinfo { ^~~~~~~ In file included from ../include/tst_safe_macros.h:15, from ../include/tst_test.h:93, from tst_crypto.c:11: x86_64-buildroot-linux-musl/sysroot/usr/include/sys/sysinfo.h:10:8: note: originally defined here Link: https://lkml.kernel.org/r/20201015190013.8901-1-petr.vorel@gmail.com Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Suggested-by: Rich Felker <dalias@aerifal.cx> Acked-by: Rich Felker <dalias@libc.org> Cc: Peter Korsgaard <peter@korsgaard.com> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Florian Weimer <fweimer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-06fscrypt: remove kernel-internal constants from UAPI headerEric Biggers
commit 3ceb6543e9cf6ed87cc1fbc6f23ca2db903564cd upstream. There isn't really any valid reason to use __FSCRYPT_MODE_MAX or FSCRYPT_POLICY_FLAGS_VALID in a userspace program. These constants are only meant to be used by the kernel internally, and they are defined in the UAPI header next to the mode numbers and flags only so that kernel developers don't forget to update them when adding new modes or flags. In https://lkml.kernel.org/r/20201005074133.1958633-2-satyat@google.com there was an example of someone wanting to use __FSCRYPT_MODE_MAX in a user program, and it was wrong because the program would have broken if __FSCRYPT_MODE_MAX were ever increased. So having this definition available is harmful. FSCRYPT_POLICY_FLAGS_VALID has the same problem. So, remove these definitions from the UAPI header. Replace FSCRYPT_POLICY_FLAGS_VALID with just listing the valid flags explicitly in the one kernel function that needs it. Move __FSCRYPT_MODE_MAX to fscrypt_private.h, remove the double underscores (which were only present to discourage use by userspace), and add a BUILD_BUG_ON() and comments to (hopefully) ensure it is kept in sync. Keep the old name FS_POLICY_FLAGS_VALID, since it's been around for longer and there's a greater chance that removing it would break source compatibility with some program. Indeed, mtd-utils is using it in an #ifdef, and removing it would introduce compiler warnings (about FS_POLICY_FLAGS_PAD_* being redefined) into the mtd-utils build. However, reduce its value to 0x07 so that it only includes the flags with old names (the ones present before Linux 5.4), and try to make it clear that it's now "frozen" and no new flags should be added to it. Fixes: 2336d0deb2d4 ("fscrypt: use FSCRYPT_ prefix for uapi constants") Cc: <stable@vger.kernel.org> # v5.4+ Link: https://lore.kernel.org/r/20201024005132.495952-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30binder: add flag to clear buffer on txn completeTodd Kjos
commit 0f966cba95c78029f491b433ea95ff38f414a761 upstream. Add a per-transaction flag to indicate that the buffer must be cleared when the transaction is complete to prevent copies of sensitive data from being preserved in memory. Signed-off-by: Todd Kjos <tkjos@google.com> Link: https://lore.kernel.org/r/20201120233743.3617529-1-tkjos@google.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30crypto: af_alg - avoid undefined behavior accessing salg_nameEric Biggers
commit 92eb6c3060ebe3adf381fd9899451c5b047bb14d upstream. Commit 3f69cc60768b ("crypto: af_alg - Allow arbitrarily long algorithm names") made the kernel start accepting arbitrarily long algorithm names in sockaddr_alg. However, the actual length of the salg_name field stayed at the original 64 bytes. This is broken because the kernel can access indices >= 64 in salg_name, which is undefined behavior -- even though the memory that is accessed is still located within the sockaddr structure. It would only be defined behavior if the array were properly marked as arbitrary-length (either by making it a flexible array, which is the recommended way these days, or by making it an array of length 0 or 1). We can't simply change salg_name into a flexible array, since that would break source compatibility with userspace programs that embed sockaddr_alg into another struct, or (more commonly) declare a sockaddr_alg like 'struct sockaddr_alg sa = { .salg_name = "foo" };'. One solution would be to change salg_name into a flexible array only when '#ifdef __KERNEL__'. However, that would keep userspace without an easy way to actually use the longer algorithm names. Instead, add a new structure 'sockaddr_alg_new' that has the flexible array field, and expose it to both userspace and the kernel. Make the kernel use it correctly in alg_bind(). This addresses the syzbot report "UBSAN: array-index-out-of-bounds in alg_bind" (https://syzkaller.appspot.com/bug?extid=92ead4eb8e26a26d465e). Reported-by: syzbot+92ead4eb8e26a26d465e@syzkaller.appspotmail.com Fixes: 3f69cc60768b ("crypto: af_alg - Allow arbitrarily long algorithm names") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-21ptrace: Prevent kernel-infoleak in ptrace_get_syscall_info()Peilin Ye
commit 0032ce0f85a269a006e91277be5fdbc05fad8426 upstream. ptrace_get_syscall_info() is potentially copying uninitialized stack memory to userspace, since the compiler may leave a 3-byte hole near the beginning of `info`. Fix it by adding a padding field to `struct ptrace_syscall_info`. Fixes: 201766a20e30 ("ptrace: add PTRACE_GET_SYSCALL_INFO request") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Reviewed-by: Dmitry V. Levin <ldv@altlinux.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200801152044.230416-1-yepeilin.cs@gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-02ASoC: Intel: Skylake: Automatic DMIC format configuration according to ↵Mateusz Gorski
information from NHLT commit 2d744ecf2b98405723a2138a547e5c75009bc4e5 upstream. Automatically choose DMIC pipeline format configuration depending on information included in NHLT. Change the access rights of appropriate kcontrols to read-only in order to prevent user interference. Signed-off-by: Mateusz Gorski <mateusz.gorski@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200427132727.24942-4-mateusz.gorski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> # 5.4.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-02ASoC: Intel: Multiple I/O PCM format support for pipeMateusz Gorski
commit 1b450791d517d4d6666ab9ab6d9a20c8819e3572 upstream. For pipes supporting multiple input/output formats, kcontrol is created and selection of pipe input and output configuration is done based on control set. If more than one configuration is supported, then this patch allows user to select configuration of choice using amixer settings. Signed-off-by: Mateusz Gorski <mateusz.gorski@linux.intel.com> Signed-off-by: Pavan K S <pavan.k.s@intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200427132727.24942-3-mateusz.gorski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> # 5.4.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-02wireless: Use linux/stddef.h instead of stddef.hHauke Mehrtens
commit 1b9ae0c92925ac40489be526d67d0010d0724ce0 upstream. When compiling inside the kernel include linux/stddef.h instead of stddef.h. When I compile this header file in backports for power PC I run into a conflict with ptrdiff_t. I was unable to reproduce this in mainline kernel. I still would like to fix this problem in the kernel. Fixes: 6989310f5d43 ("wireless: Use offsetof instead of custom macro.") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Link: https://lore.kernel.org/r/20200521201422.16493-1-hauke@hauke-m.de Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05NFSv4.2: support EXCHGID4_FLAG_SUPP_FENCE_OPS 4.2 EXCHANGE_ID flagOlga Kornievskaia
commit 8c39076c276be0b31982e44654e2c2357473258a upstream. RFC 7862 introduced a new flag that either client or server is allowed to set: EXCHGID4_FLAG_SUPP_FENCE_OPS. Client needs to update its bitmask to allow for this flag value. v2: changed minor version argument to unsigned int Signed-off-by: Olga Kornievskaia <kolga@netapp.com> CC: <stable@vger.kernel.org> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05btrfs: tree-checker: fix false alert caused by legacy btrfs root itemQu Wenruo
commit 1465af12e254a68706e110846f59cf0f09683184 upstream. Commit 259ee7754b67 ("btrfs: tree-checker: Add ROOT_ITEM check") introduced btrfs root item size check, however btrfs root item has two versions, the legacy one which just ends before generation_v2 member, is smaller than current btrfs root item size. This caused btrfs kernel to reject valid but old tree root leaves. Fix this problem by also allowing legacy root item, since kernel can already handle them pretty well and upgrade to newer root item format when needed. Reported-by: Martin Steigerwald <martin@lichtvoll.de> Fixes: 259ee7754b67 ("btrfs: tree-checker: Add ROOT_ITEM check") CC: stable@vger.kernel.org # 5.4+ Tested-By: Martin Steigerwald <martin@lichtvoll.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05media: videodev2.h: RGB BT2020 and HSV are always full rangeHans Verkuil
[ Upstream commit b305dfe2e93434b12d438434461b709641f62af4 ] The default RGB quantization range for BT.2020 is full range (just as for all the other RGB pixel encodings), not limited range. Update the V4L2_MAP_QUANTIZATION_DEFAULT macro and documentation accordingly. Also mention that HSV is always full range and cannot be limited range. When RGB BT2020 was introduced in V4L2 it was not clear whether it should be limited or full range, but full range is the right (and consistent) choice. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-01bpf: Fix comment for helper bpf_current_task_under_cgroup()Song Liu
commit 1aef5b4391f0c75c0a1523706a7b0311846ee12f upstream. This should be "current" not "skb". Fixes: c6b5fb8690fa ("bpf: add documentation for eBPF helpers (42-50)") Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/bpf/20200910203314.70018-1-songliubraving@fb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29perf: correct SNOOPX field offsetAl Grant
[ Upstream commit f3d301c1f2f5676465cdf3259737ea19cc82731f ] perf_event.h has macros that define the field offsets in the data_src bitmask in perf records. The SNOOPX and REMOTE offsets were both 37. These are distinct fields, and the bitfield layout in perf_mem_data_src confirms that SNOOPX should be at offset 38. Fixes: 52839e653b5629bd ("perf tools: Add support for printing new mem_info encodings") Signed-off-by: Al Grant <al.grant@foss.arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: https://lkml.kernel.org/r/4ac9f5cc-4388-b34a-9999-418a4099415d@foss.arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23KVM: MIPS: Change the definition of kvm typeHuacai Chen
[ Upstream commit 15e9e35cd1dec2bc138464de6bf8ef828df19235 ] MIPS defines two kvm types: #define KVM_VM_MIPS_TE 0 #define KVM_VM_MIPS_VZ 1 In Documentation/virt/kvm/api.rst it is said that "You probably want to use 0 as machine type", which implies that type 0 be the "automatic" or "default" type. And, in user-space libvirt use the null-machine (with type 0) to detect the kvm capability, which returns "KVM not supported" on a VZ platform. I try to fix it in QEMU but it is ugly: https://lists.nongnu.org/archive/html/qemu-devel/2020-08/msg05629.html And Thomas Huth suggests me to change the definition of kvm type: https://lists.nongnu.org/archive/html/qemu-devel/2020-09/msg03281.html So I define like this: #define KVM_VM_MIPS_AUTO 0 #define KVM_VM_MIPS_VZ 1 #define KVM_VM_MIPS_TE 2 Since VZ and TE cannot co-exists, using type 0 on a TE platform will still return success (so old user-space tools have no problems on new kernels); the advantage is that using type 0 on a VZ platform will not return failure. So, the only problem is "new user-space tools use type 2 on old kernels", but if we treat this as a kernel bug, we can backport this patch to old stable kernels. Signed-off-by: Huacai Chen <chenhc@lemote.com> Message-Id: <1599734031-28746-1-git-send-email-chenhc@lemote.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-09netfilter: nf_tables: incorrect enum nft_list_attributes definitionPablo Neira Ayuso
[ Upstream commit da9125df854ea48a6240c66e8a67be06e2c12c03 ] This should be NFTA_LIST_UNSPEC instead of NFTA_LIST_UNPEC, all other similar attribute definitions are postfixed with _UNSPEC. Fixes: 96518518cc41 ("netfilter: add nftables") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19seccomp: Fix ioctl number for SECCOMP_IOCTL_NOTIF_ID_VALIDKees Cook
[ Upstream commit 47e33c05f9f07cac3de833e531bcac9ae052c7ca ] When SECCOMP_IOCTL_NOTIF_ID_VALID was first introduced it had the wrong direction flag set. While this isn't a big deal as nothing currently enforces these bits in the kernel, it should be defined correctly. Fix the define and provide support for the old command until it is no longer needed for backward compatibility. Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-16 00:30:12 +0000