summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2022-09-15debugfs: add debugfs_lookup_and_remove()Greg Kroah-Hartman
commit dec9b2f1e0455a151a7293c367da22ab973f713e upstream. There is a very common pattern of using debugfs_remove(debufs_lookup(..)) which results in a dentry leak of the dentry that was looked up. Instead of having to open-code the correct pattern of calling dput() on the dentry, create debugfs_lookup_and_remove() to handle this pattern automatically and properly without any memory leaks. Cc: stable <stable@kernel.org> Reported-by: Kuyo Chang <kuyo.chang@mediatek.com> Tested-by: Kuyo Chang <kuyo.chang@mediatek.com> Link: https://lore.kernel.org/r/YxIaQ8cSinDR881k@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15USB: core: Prevent nested device-reset callsAlan Stern
commit 9c6d778800b921bde3bff3cff5003d1650f942d1 upstream. Automatic kernel fuzzing revealed a recursive locking violation in usb-storage: ============================================ WARNING: possible recursive locking detected 5.18.0 #3 Not tainted -------------------------------------------- kworker/1:3/1205 is trying to acquire lock: ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at: usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 but task is already holding lock: ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at: usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 ... stack backtrace: CPU: 1 PID: 1205 Comm: kworker/1:3 Not tainted 5.18.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2988 [inline] check_deadlock kernel/locking/lockdep.c:3031 [inline] validate_chain kernel/locking/lockdep.c:3816 [inline] __lock_acquire.cold+0x152/0x3ca kernel/locking/lockdep.c:5053 lock_acquire kernel/locking/lockdep.c:5665 [inline] lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5630 __mutex_lock_common kernel/locking/mutex.c:603 [inline] __mutex_lock+0x14f/0x1610 kernel/locking/mutex.c:747 usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 usb_reset_device+0x37d/0x9a0 drivers/usb/core/hub.c:6109 r871xu_dev_remove+0x21a/0x270 drivers/staging/rtl8712/usb_intf.c:622 usb_unbind_interface+0x1bd/0x890 drivers/usb/core/driver.c:458 device_remove drivers/base/dd.c:545 [inline] device_remove+0x11f/0x170 drivers/base/dd.c:537 __device_release_driver drivers/base/dd.c:1222 [inline] device_release_driver_internal+0x1a7/0x2f0 drivers/base/dd.c:1248 usb_driver_release_interface+0x102/0x180 drivers/usb/core/driver.c:627 usb_forced_unbind_intf+0x4d/0xa0 drivers/usb/core/driver.c:1118 usb_reset_device+0x39b/0x9a0 drivers/usb/core/hub.c:6114 This turned out not to be an error in usb-storage but rather a nested device reset attempt. That is, as the rtl8712 driver was being unbound from a composite device in preparation for an unrelated USB reset (that driver does not have pre_reset or post_reset callbacks), its ->remove routine called usb_reset_device() -- thus nesting one reset call within another. Performing a reset as part of disconnect processing is a questionable practice at best. However, the bug report points out that the USB core does not have any protection against nested resets. Adding a reset_in_progress flag and testing it will prevent such errors in the future. Link: https://lore.kernel.org/all/CAB7eexKUpvX-JNiLzhXBDWgfg2T9e9_0Tw4HQ6keN==voRbP0g@mail.gmail.com/ Cc: stable@vger.kernel.org Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YwkflDxvg0KWqyZK@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15usb: typec: altmodes/displayport: correct pin assignment for UFP receptaclesPablo Sun
commit c1e5c2f0cb8a22ec2e14af92afc7006491bebabb upstream. Fix incorrect pin assignment values when connecting to a monitor with Type-C receptacle instead of a plug. According to specification, an UFP_D receptacle's pin assignment should came from the UFP_D pin assignments field (bit 23:16), while an UFP_D plug's assignments are described in the DFP_D pin assignments (bit 15:8) during Mode Discovery. For example the LG 27 UL850-W is a monitor with Type-C receptacle. The monitor responds to MODE DISCOVERY command with following DisplayPort Capability flag: dp->alt->vdo=0x140045 The existing logic only take cares of UPF_D plug case, and would take the bit 15:8 for this 0x140045 case. This results in an non-existing pin assignment 0x0 in dp_altmode_configure. To fix this problem a new set of macros are introduced to take plug/receptacle differences into consideration. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Co-developed-by: Pablo Sun <pablo.sun@mediatek.com> Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: Guillaume Ranquet <granquet@baylibre.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Pablo Sun <pablo.sun@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Link: https://lore.kernel.org/r/20220804034803.19486-1-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15platform/x86: pmc_atom: Fix SLP_TYPx bitfield maskAndy Shevchenko
[ Upstream commit 0a90ed8d0cfa29735a221eba14d9cb6c735d35b6 ] On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI specification (see Table 4.13 "PM1 Control Registers Fixed Hardware Feature Control Bits" for the details). Fix the mask and other related definitions accordingly. Fixes: 93e5eadd1f6e ("x86/platform: New Intel Atom SOC power management controller driver") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220801113734.36131-1-andriy.shevchenko@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15fs: only do a memory barrier for the first set_buffer_uptodate()Linus Torvalds
commit 2f79cdfe58c13949bbbb65ba5926abfe9561d0ec upstream. Commit d4252071b97d ("add barriers to buffer_uptodate and set_buffer_uptodate") added proper memory barriers to the buffer head BH_Uptodate bit, so that anybody who tests a buffer for being up-to-date will be guaranteed to actually see initialized state. However, that commit didn't _just_ add the memory barrier, it also ended up dropping the "was it already set" logic that the BUFFER_FNS() macro had. That's conceptually the right thing for a generic "this is a memory barrier" operation, but in the case of the buffer contents, we really only care about the memory barrier for the _first_ time we set the bit, in that the only memory ordering protection we need is to avoid anybody seeing uninitialized memory contents. Any other access ordering wouldn't be about the BH_Uptodate bit anyway, and would require some other proper lock (typically BH_Lock or the folio lock). A reader that races with somebody invalidating the buffer head isn't an issue wrt the memory ordering, it's a serialization issue. Now, you'd think that the buffer head operations don't matter in this day and age (and I certainly thought so), but apparently some loads still end up being heavy users of buffer heads. In particular, the kernel test robot reported that not having this bit access optimization in place caused a noticeable direct IO performance regression on ext4: fxmark.ssd_ext4_no_jnl_DWTL_54_directio.works/sec -26.5% regression although you presumably need a fast disk and a lot of cores to actually notice. Link: https://lore.kernel.org/all/Yw8L7HTZ%2FdE2%2Fo9C@xsang-OptiPlex-9020/ Reported-by: kernel test robot <oliver.sang@intel.com> Tested-by: Fengwei Yin <fengwei.yin@intel.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05mm/rmap: Fix anon_vma->degree ambiguity leading to double-reuseJann Horn
commit 2555283eb40df89945557273121e9393ef9b542b upstream. anon_vma->degree tracks the combined number of child anon_vmas and VMAs that use the anon_vma as their ->anon_vma. anon_vma_clone() then assumes that for any anon_vma attached to src->anon_vma_chain other than src->anon_vma, it is impossible for it to be a leaf node of the VMA tree, meaning that for such VMAs ->degree is elevated by 1 because of a child anon_vma, meaning that if ->degree equals 1 there are no VMAs that use the anon_vma as their ->anon_vma. This assumption is wrong because the ->degree optimization leads to leaf nodes being abandoned on anon_vma_clone() - an existing anon_vma is reused and no new parent-child relationship is created. So it is possible to reuse an anon_vma for one VMA while it is still tied to another VMA. This is an issue because is_mergeable_anon_vma() and its callers assume that if two VMAs have the same ->anon_vma, the list of anon_vmas attached to the VMAs is guaranteed to be the same. When this assumption is violated, vma_merge() can merge pages into a VMA that is not attached to the corresponding anon_vma, leading to dangling page->mapping pointers that will be dereferenced during rmap walks. Fix it by separately tracking the number of child anon_vmas and the number of VMAs using the anon_vma as their ->anon_vma. Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy") Cc: stable@kernel.org Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05asm-generic: sections: refactor memory_intersectsQuanyang Wang
commit 0c7d7cc2b4fe2e74ef8728f030f0f1674f9f6aee upstream. There are two problems with the current code of memory_intersects: First, it doesn't check whether the region (begin, end) falls inside the region (virt, vend), that is (virt < begin && vend > end). The second problem is if vend is equal to begin, it will return true but this is wrong since vend (virt + size) is not the last address of the memory region but (virt + size -1) is. The wrong determination will trigger the misreporting when the function check_for_illegal_area calls memory_intersects to check if the dma region intersects with stext region. The misreporting is as below (stext is at 0x80100000): WARNING: CPU: 0 PID: 77 at kernel/dma/debug.c:1073 check_for_illegal_area+0x130/0x168 DMA-API: chipidea-usb2 e0002000.usb: device driver maps memory from kernel text or rodata [addr=800f0000] [len=65536] Modules linked in: CPU: 1 PID: 77 Comm: usb-storage Not tainted 5.19.0-yocto-standard #5 Hardware name: Xilinx Zynq Platform unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0xb0/0x198 __warn from warn_slowpath_fmt+0x80/0xb4 warn_slowpath_fmt from check_for_illegal_area+0x130/0x168 check_for_illegal_area from debug_dma_map_sg+0x94/0x368 debug_dma_map_sg from __dma_map_sg_attrs+0x114/0x128 __dma_map_sg_attrs from dma_map_sg_attrs+0x18/0x24 dma_map_sg_attrs from usb_hcd_map_urb_for_dma+0x250/0x3b4 usb_hcd_map_urb_for_dma from usb_hcd_submit_urb+0x194/0x214 usb_hcd_submit_urb from usb_sg_wait+0xa4/0x118 usb_sg_wait from usb_stor_bulk_transfer_sglist+0xa0/0xec usb_stor_bulk_transfer_sglist from usb_stor_bulk_srb+0x38/0x70 usb_stor_bulk_srb from usb_stor_Bulk_transport+0x150/0x360 usb_stor_Bulk_transport from usb_stor_invoke_transport+0x38/0x440 usb_stor_invoke_transport from usb_stor_control_thread+0x1e0/0x238 usb_stor_control_thread from kthread+0xf8/0x104 kthread from ret_from_fork+0x14/0x2c Refactor memory_intersects to fix the two problems above. Before the 1d7db834a027e ("dma-debug: use memory_intersects() directly"), memory_intersects is called only by printk_late_init: printk_late_init -> init_section_intersects ->memory_intersects. There were few places where memory_intersects was called. When commit 1d7db834a027e ("dma-debug: use memory_intersects() directly") was merged and CONFIG_DMA_API_DEBUG is enabled, the DMA subsystem uses it to check for an illegal area and the calltrace above is triggered. [akpm@linux-foundation.org: fix nearby comment typo] Link: https://lkml.kernel.org/r/20220819081145.948016-1-quanyang.wang@windriver.com Fixes: 979559362516 ("asm/sections: add helpers to check for section data") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thierry Reding <treding@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05net: Fix a data-race around sysctl_net_busy_poll.Kuniyuki Iwashima
[ Upstream commit c42b7cddea47503411bfb5f2f93a4154aaffa2d9 ] While reading sysctl_net_busy_poll, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 060212928670 ("net: add low latency socket poll") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-05netfilter: ebtables: reject blobs that don't provide all entry pointsFlorian Westphal
[ Upstream commit 7997eff82828304b780dc0a39707e1946d6f1ebf ] Harshit Mogalapalli says: In ebt_do_table() function dereferencing 'private->hook_entry[hook]' can lead to NULL pointer dereference. [..] Kernel panic: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] [..] RIP: 0010:ebt_do_table+0x1dc/0x1ce0 Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 5c 16 00 00 48 b8 00 00 00 00 00 fc ff df 49 8b 6c df 08 48 8d 7d 2c 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 88 [..] Call Trace: nf_hook_slow+0xb1/0x170 __br_forward+0x289/0x730 maybe_deliver+0x24b/0x380 br_flood+0xc6/0x390 br_dev_xmit+0xa2e/0x12c0 For some reason ebtables rejects blobs that provide entry points that are not supported by the table, but what it should instead reject is the opposite: blobs that DO NOT provide an entry point supported by the table. t->valid_hooks is the bitmask of hooks (input, forward ...) that will see packets. Providing an entry point that is not support is harmless (never called/used), but the inverse isn't: it results in a crash because the ebtables traverser doesn't expect a NULL blob for a location its receiving packets for. Instead of fixing all the individual checks, do what iptables is doing and reject all blobs that differ from the expected hooks. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-05kernel/sched: Remove dl_boosted flag commentHui Su
commit 0e3872499de1a1230cef5221607d71aa09264bd5 upstream. since commit 2279f540ea7d ("sched/deadline: Fix priority inheritance with multiple scheduling classes"), we should not keep it here. Signed-off-by: Hui Su <suhui_kernel@163.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Link: https://lore.kernel.org/r/20220107095254.GA49258@localhost.localdomain [Ankit: Regenerated the patch for v4.19.y] Signed-off-by: Ankit Jain <ankitja@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05sched/deadline: Fix priority inheritance with multiple scheduling classesJuri Lelli
commit 2279f540ea7d05f22d2f0c4224319330228586bc upstream. Glenn reported that "an application [he developed produces] a BUG in deadline.c when a SCHED_DEADLINE task contends with CFS tasks on nested PTHREAD_PRIO_INHERIT mutexes. I believe the bug is triggered when a CFS task that was boosted by a SCHED_DEADLINE task boosts another CFS task (nested priority inheritance). ------------[ cut here ]------------ kernel BUG at kernel/sched/deadline.c:1462! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 12 PID: 19171 Comm: dl_boost_bug Tainted: ... Hardware name: ... RIP: 0010:enqueue_task_dl+0x335/0x910 Code: ... RSP: 0018:ffffc9000c2bbc68 EFLAGS: 00010002 RAX: 0000000000000009 RBX: ffff888c0af94c00 RCX: ffffffff81e12500 RDX: 000000000000002e RSI: ffff888c0af94c00 RDI: ffff888c10b22600 RBP: ffffc9000c2bbd08 R08: 0000000000000009 R09: 0000000000000078 R10: ffffffff81e12440 R11: ffffffff81e1236c R12: ffff888bc8932600 R13: ffff888c0af94eb8 R14: ffff888c10b22600 R15: ffff888bc8932600 FS: 00007fa58ac55700(0000) GS:ffff888c10b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa58b523230 CR3: 0000000bf44ab003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? intel_pstate_update_util_hwp+0x13/0x170 rt_mutex_setprio+0x1cc/0x4b0 task_blocks_on_rt_mutex+0x225/0x260 rt_spin_lock_slowlock_locked+0xab/0x2d0 rt_spin_lock_slowlock+0x50/0x80 hrtimer_grab_expiry_lock+0x20/0x30 hrtimer_cancel+0x13/0x30 do_nanosleep+0xa0/0x150 hrtimer_nanosleep+0xe1/0x230 ? __hrtimer_init_sleeper+0x60/0x60 __x64_sys_nanosleep+0x8d/0xa0 do_syscall_64+0x4a/0x100 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fa58b52330d ... ---[ end trace 0000000000000002 ]— He also provided a simple reproducer creating the situation below: So the execution order of locking steps are the following (N1 and N2 are non-deadline tasks. D1 is a deadline task. M1 and M2 are mutexes that are enabled * with priority inheritance.) Time moves forward as this timeline goes down: N1 N2 D1 | | | | | | Lock(M1) | | | | | | Lock(M2) | | | | | | Lock(M2) | | | | Lock(M1) | | (!!bug triggered!) | Daniel reported a similar situation as well, by just letting ksoftirqd run with DEADLINE (and eventually block on a mutex). Problem is that boosted entities (Priority Inheritance) use static DEADLINE parameters of the top priority waiter. However, there might be cases where top waiter could be a non-DEADLINE entity that is currently boosted by a DEADLINE entity from a different lock chain (i.e., nested priority chains involving entities of non-DEADLINE classes). In this case, top waiter static DEADLINE parameters could be null (initialized to 0 at fork()) and replenish_dl_entity() would hit a BUG(). Fix this by keeping track of the original donor and using its parameters when a task is boosted. Reported-by: Glenn Elliott <glenn@aurora.tech> Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Bristot de Oliveira <bristot@redhat.com> Link: https://lkml.kernel.org/r/20201117061432.517340-1-juri.lelli@redhat.com [Ankit: Regenerated the patch for v4.19.y] Signed-off-by: Ankit Jain <ankitja@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25ALSA: core: Add async signal helpersTakashi Iwai
[ Upstream commit ef34a0ae7a2654bc9e58675e36898217fb2799d8 ] Currently the call of kill_fasync() from an interrupt handler might lead to potential spin deadlocks, as spotted by syzkaller. Unfortunately, it's not so trivial to fix this lock chain as it's involved with the tasklist_lock that is touched in allover places. As a temporary workaround, this patch provides the way to defer the async signal notification in a work. The new helper functions, snd_fasync_helper() and snd_kill_faync() are replacements for fasync_helper() and kill_fasync(), respectively. In addition, snd_fasync_free() needs to be called at the destructor of the relevant file object. Link: https://lore.kernel.org/r/20220728125945.29533-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25watchdog: export lockup_detector_reconfigureLaurent Dufour
[ Upstream commit 7c56a8733d0a2a4be2438a7512566e5ce552fccf ] In some circumstances it may be interesting to reconfigure the watchdog from inside the kernel. On PowerPC, this may helpful before and after a LPAR migration (LPM) is initiated, because it implies some latencies, watchdog, and especially NMI watchdog is expected to be triggered during this operation. Reconfiguring the watchdog with a factor, would prevent it to happen too frequently during LPM. Rename lockup_detector_reconfigure() as __lockup_detector_reconfigure() and create a new function lockup_detector_reconfigure() calling __lockup_detector_reconfigure() under the protection of watchdog_mutex. Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> [mpe: Squash in build fix from Laurent, reported by Sachin] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220713154729.80789-3-ldufour@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25locking/atomic: Make test_and_*_bit() ordered on failureHector Martin
commit 415d832497098030241605c52ea83d4e2cfa7879 upstream. These operations are documented as always ordered in include/asm-generic/bitops/instrumented-atomic.h, and producer-consumer type use cases where one side needs to ensure a flag is left pending after some shared data was updated rely on this ordering, even in the failure case. This is the case with the workqueue code, which currently suffers from a reproducible ordering violation on Apple M1 platforms (which are notoriously out-of-order) that ends up causing the TTY layer to fail to deliver data to userspace properly under the right conditions. This change fixes that bug. Change the documentation to restrict the "no order on failure" story to the _lock() variant (for which it makes sense), and remove the early-exit from the generic implementation, which is what causes the missing barrier semantics in that case. Without this, the remaining atomic op is fully ordered (including on ARM64 LSE, as of recent versions of the architecture spec). Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: e986a0d6cb36 ("locking/atomics, asm-generic/bitops/atomic.h: Rewrite using atomic_*() APIs") Fixes: 61e02392d3c7 ("locking/atomic/bitops: Document and clarify ordering semantics for failed test_and_{}_bit()") Signed-off-by: Hector Martin <marcan@marcan.st> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25KVM: Add infrastructure and macro to mark VM as buggedSean Christopherson
commit 0b8f11737cffc1a406d1134b58687abc29d76b52 upstream Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <3a0998645c328bf0895f1290e61821b70f048549.1625186503.git.isaku.yamahata@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [SG: Adjusted context for kernel version 4.19] Signed-off-by: Stefan Ghinea <stefan.ghinea@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25ACPI: CPPC: Do not prevent CPPC from working in the futureRafael J. Wysocki
commit 4f4179fcf420873002035cf1941d844c9e0e7cb3 upstream. There is a problem with the current revision checks in is_cppc_supported() that they essentially prevent the CPPC support from working if a new _CPC package format revision being a proper superset of the v3 and only causing _CPC to return a package with more entries (while retaining the types and meaning of the entries defined by the v3) is introduced in the future and used by the platform firmware. In that case, as long as the number of entries in the _CPC return package is at least CPPC_V3_NUM_ENT, it should be perfectly fine to use the v3 support code and disregard the additional package entries added by the new package format revision. For this reason, drop is_cppc_supported() altogether, put the revision checks directly into acpi_cppc_processor_probe() so they are easier to follow and rework them to take the case mentioned above into account. Fixes: 4773e77cdc9b ("ACPI / CPPC: Add support for CPPC v3") Cc: 4.18+ <stable@vger.kernel.org> # 4.18+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25spmi: trace: fix stack-out-of-bound access in SPMI tracing functionsDavid Collins
commit 2af28b241eea816e6f7668d1954f15894b45d7e3 upstream. trace_spmi_write_begin() and trace_spmi_read_end() both call memcpy() with a length of "len + 1". This leads to one extra byte being read beyond the end of the specified buffer. Fix this out-of-bound memory access by using a length of "len" instead. Here is a KASAN log showing the issue: BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_spmi_read_end+0x1d0/0x234 Read of size 2 at addr ffffffc0265b7540 by task thermal@2.0-ser/1314 ... Call trace: dump_backtrace+0x0/0x3e8 show_stack+0x2c/0x3c dump_stack_lvl+0xdc/0x11c print_address_description+0x74/0x384 kasan_report+0x188/0x268 kasan_check_range+0x270/0x2b0 memcpy+0x90/0xe8 trace_event_raw_event_spmi_read_end+0x1d0/0x234 spmi_read_cmd+0x294/0x3ac spmi_ext_register_readl+0x84/0x9c regmap_spmi_ext_read+0x144/0x1b0 [regmap_spmi] _regmap_raw_read+0x40c/0x754 regmap_raw_read+0x3a0/0x514 regmap_bulk_read+0x418/0x494 adc5_gen3_poll_wait_hs+0xe8/0x1e0 [qcom_spmi_adc5_gen3] ... __arm64_sys_read+0x4c/0x60 invoke_syscall+0x80/0x218 el0_svc_common+0xec/0x1c8 ... addr ffffffc0265b7540 is located in stack of task thermal@2.0-ser/1314 at offset 32 in frame: adc5_gen3_poll_wait_hs+0x0/0x1e0 [qcom_spmi_adc5_gen3] this frame has 1 object: [32, 33) 'status' Memory state around the buggy address: ffffffc0265b7400: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 ffffffc0265b7480: 04 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffc0265b7500: 00 00 00 00 f1 f1 f1 f1 01 f3 f3 f3 00 00 00 00 ^ ffffffc0265b7580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc0265b7600: f1 f1 f1 f1 01 f2 07 f2 f2 f2 01 f3 00 00 00 00 ================================================================== Fixes: a9fce374815d ("spmi: add command tracepoints for SPMI") Cc: stable@vger.kernel.org Reviewed-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: David Collins <quic_collinsd@quicinc.com> Link: https://lore.kernel.org/r/20220627235512.2272783-1-quic_collinsd@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25mfd: t7l66xb: Drop platform disable callbackUwe Kleine-König
[ Upstream commit 128ac294e1b437cb8a7f2ff8ede1cde9082bddbe ] None of the in-tree instantiations of struct t7l66xb_platform_data provides a disable callback. So better don't dereference this function pointer unconditionally. As there is no user, drop it completely instead of calling it conditional. This is a preparation for making platform remove callbacks return void. Fixes: 1f192015ca5b ("mfd: driver for the T7L66XB TMIO SoC") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220530192430.2108217-3-u.kleine-koenig@pengutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25kfifo: fix kfifo_to_user() return typeDan Carpenter
[ Upstream commit 045ed31e23aea840648c290dbde04797064960db ] The kfifo_to_user() macro is supposed to return zero for success or negative error codes. Unfortunately, there is a signedness bug so it returns unsigned int. This only affects callers which try to save the result in ssize_t and as far as I can see the only place which does that is line6_hwdep_read(). TL;DR: s/_uint/_int/. Link: https://lkml.kernel.org/r/YrVL3OJVLlNhIMFs@kili Fixes: 144ecf310eb5 ("kfifo: fix kfifo_alloc() to return a signed int value") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Stefani Seibold <stefani@seibold.net> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25can: error: specify the values of data[5..7] of CAN error framesVincent Mailhol
[ Upstream commit e70a3263a7eed768d5f947b8f2aff8d2a79c9d97 ] Currently, data[5..7] of struct can_frame, when used as a CAN error frame, are defined as being "controller specific". Device specific behaviours are problematic because it prevents someone from writing code which is portable between devices. As a matter of fact, data[5] is never used, data[6] is always used to report TX error counter and data[7] is always used to report RX error counter. can-utils also relies on this. This patch updates the comment in the uapi header to specify that data[5] is reserved (and thus should not be used) and that data[6..7] are used for error counters. Fixes: 0d66548a10cb ("[CAN]: Add PF_CAN core module") Link: https://lore.kernel.org/all/20220719143550.3681-11-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25USB: HCD: Fix URB giveback issue in tasklet functionWeitao Wang
commit 26c6c2f8a907c9e3a2f24990552a4d77235791e6 upstream. Usb core introduce the mechanism of giveback of URB in tasklet context to reduce hardware interrupt handling time. On some test situation(such as FIO with 4KB block size), when tasklet callback function called to giveback URB, interrupt handler add URB node to the bh->head list also. If check bh->head list again after finish all URB giveback of local_list, then it may introduce a "dynamic balance" between giveback URB and add URB to bh->head list. This tasklet callback function may not exit for a long time, which will cause other tasklet function calls to be delayed. Some real-time applications(such as KB and Mouse) will see noticeable lag. In order to prevent the tasklet function from occupying the cpu for a long time at a time, new URBS will not be added to the local_list even though the bh->head list is not empty. But also need to ensure the left URB giveback to be processed in time, so add a member high_prio for structure giveback_urb_bh to prioritize tasklet and schelule this tasklet again if bh->head list is not empty. At the same time, we are able to prioritize tasklet through structure member high_prio. So, replace the local high_prio_bh variable with this structure member in usb_hcd_giveback_urb. Fixes: 94dfd7edfd5c ("USB: HCD: support giveback of URB in tasklet context") Cc: stable <stable@kernel.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com> Link: https://lore.kernel.org/r/20220726074918.5114-1-WeitaoWang-oc@zhaoxin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25PCI: Add defines for normal and subtractive PCI bridgesPali Rohár
commit 904b10fb189cc15376e9bfce1ef0282e68b0b004 upstream. Add these PCI class codes to pci_ids.h: PCI_CLASS_BRIDGE_PCI_NORMAL PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE Use these defines in all kernel code for describing PCI class codes for normal and subtractive PCI bridges. [bhelgaas: similar change in pci-mvebu.c] Link: https://lore.kernel.org/r/20220214114109.26809-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Guenter Roeck <linux@roeck-us.net>a Cc: Naresh Kamboju <naresh.kamboju@linaro.org> [ gregkh - take only the pci_ids.h portion for stable backports ] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25add barriers to buffer_uptodate and set_buffer_uptodateMikulas Patocka
commit d4252071b97d2027d246f6a82cbee4d52f618b47 upstream. Let's have a look at this piece of code in __bread_slow: get_bh(bh); bh->b_end_io = end_buffer_read_sync; submit_bh(REQ_OP_READ, 0, bh); wait_on_buffer(bh); if (buffer_uptodate(bh)) return bh; Neither wait_on_buffer nor buffer_uptodate contain any memory barrier. Consequently, if someone calls sb_bread and then reads the buffer data, the read of buffer data may be executed before wait_on_buffer(bh) on architectures with weak memory ordering and it may return invalid data. Fix this bug by adding a memory barrier to set_buffer_uptodate and an acquire barrier to buffer_uptodate (in a similar way as folio_test_uptodate and folio_mark_uptodate). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-11tcp: Fix a data-race around sysctl_tcp_adv_win_scale.Kuniyuki Iwashima
commit 36eeee75ef0157e42fb6593dcc65daab289b559e upstream. While reading sysctl_tcp_adv_win_scale, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-11Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_putLuiz Augusto von Dentz
commit d0be8347c623e0ac4202a1d4e0373882821f56b0 upstream. This fixes the following trace which is caused by hci_rx_work starting up *after* the final channel reference has been put() during sock_close() but *before* the references to the channel have been destroyed, so instead the code now rely on kref_get_unless_zero/l2cap_chan_hold_unless_zero to prevent referencing a channel that is about to be destroyed. refcount_t: increment on 0; use-after-free. BUG: KASAN: use-after-free in refcount_dec_and_test+0x20/0xd0 Read of size 4 at addr ffffffc114f5bf18 by task kworker/u17:14/705 CPU: 4 PID: 705 Comm: kworker/u17:14 Tainted: G S W 4.14.234-00003-g1fb6d0bd49a4-dirty #28 Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150 Google Inc. MSM sm8150 Flame DVT (DT) Workqueue: hci0 hci_rx_work Call trace: dump_backtrace+0x0/0x378 show_stack+0x20/0x2c dump_stack+0x124/0x148 print_address_description+0x80/0x2e8 __kasan_report+0x168/0x188 kasan_report+0x10/0x18 __asan_load4+0x84/0x8c refcount_dec_and_test+0x20/0xd0 l2cap_chan_put+0x48/0x12c l2cap_recv_frame+0x4770/0x6550 l2cap_recv_acldata+0x44c/0x7a4 hci_acldata_packet+0x100/0x188 hci_rx_work+0x178/0x23c process_one_work+0x35c/0x95c worker_thread+0x4cc/0x960 kthread+0x1a8/0x1c4 ret_from_fork+0x10/0x18 Cc: stable@kernel.org Reported-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-29tty: use new tty_insert_flip_string_and_push_buffer() in pty_write()Jiri Slaby
commit a501ab75e7624d133a5a3c7ec010687c8b961d23 upstream. There is a race in pty_write(). pty_write() can be called in parallel with e.g. ioctl(TIOCSTI) or ioctl(TCXONC) which also inserts chars to the buffer. Provided, tty_flip_buffer_push() in pty_write() is called outside the lock, it can commit inconsistent tail. This can lead to out of bounds writes and other issues. See the Link below. To fix this, we have to introduce a new helper called tty_insert_flip_string_and_push_buffer(). It does both tty_insert_flip_string() and tty_flip_buffer_commit() under the port lock. It also calls queue_work(), but outside the lock. See 71a174b39f10 (pty: do tty_flip_buffer_push without port->lock in pty_write) for the reasons. Keep the helper internal-only (in drivers' tty.h). It is not intended to be used widely. Link: https://seclists.org/oss-sec/2022/q2/155 Fixes: 71a174b39f10 (pty: do tty_flip_buffer_push without port->lock in pty_write) Cc: 一只狗 <chennbnbnb@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220707082558.9250-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-29tty: drop tty_schedule_flip()Jiri Slaby
commit 5db96ef23bda6c2a61a51693c85b78b52d03f654 upstream. Since commit a9c3f68f3cd8d (tty: Fix low_latency BUG) in 2014, tty_flip_buffer_push() is only a wrapper to tty_schedule_flip(). All users were converted in the previous patches, so remove tty_schedule_flip() completely while inlining its body into tty_flip_buffer_push(). One less exported function. Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20211122111648.30379-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-29Bluetooth: Fix bt_skb_sendmmsg not allocating partial chunksLuiz Augusto von Dentz
commit 29fb608396d6a62c1b85acc421ad7a4399085b9f upstream. Since bt_skb_sendmmsg can be used with the likes of SOCK_STREAM it shall return the partial chunks it could allocate instead of freeing everything as otherwise it can cause problems like bellow. Fixes: 81be03e026dc ("Bluetooth: RFCOMM: Replace use of memcpy_from_msg with bt_skb_sendmmsg") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://lore.kernel.org/r/d7206e12-1b99-c3be-84f4-df22af427ef5@molgen.mpg.de BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215594 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> (Nokia N9 (MeeGo/Harmattan) Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-29Bluetooth: Fix passing NULL to PTR_ERRLuiz Augusto von Dentz
commit 266191aa8d14b84958aaeb5e96ee4e97839e3d87 upstream. Passing NULL to PTR_ERR will result in 0 (success), also since the likes of bt_skb_sendmsg does never return NULL it is safe to replace the instances of IS_ERR_OR_NULL with IS_ERR when checking its return. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-29Bluetooth: Add bt_skb_sendmmsg helperLuiz Augusto von Dentz
commit 97e4e80299844bb5f6ce5a7540742ffbffae3d97 upstream. This works similarly to bt_skb_sendmsg but can split the msg into multiple skb fragments which is useful for stream sockets. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-29Bluetooth: Add bt_skb_sendmsg helperLuiz Augusto von Dentz
commit 38f64f650dc0e44c146ff88d15a7339efa325918 upstream. bt_skb_sendmsg helps takes care of allocation the skb and copying the the contents of msg over to the skb while checking for possible errors so it should be safe to call it without holding lock_sock. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-29tcp: Fix data-races around sysctl_tcp_slow_start_after_idle.Kuniyuki Iwashima
[ Upstream commit 4845b5713ab18a1bb6e31d1fbb4d600240b8b691 ] While reading sysctl_tcp_slow_start_after_idle, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 35089bb203f4 ("[TCP]: Add tcp_slow_start_after_idle sysctl.") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29tcp: Fix a data-race around sysctl_tcp_notsent_lowat.Kuniyuki Iwashima
[ Upstream commit 55be873695ed8912eb77ff46d1d1cadf028bd0f3 ] While reading sysctl_tcp_notsent_lowat, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29tcp: Fix data-races around some timeout sysctl knobs.Kuniyuki Iwashima
[ Upstream commit 39e24435a776e9de5c6dd188836cf2523547804b ] While reading these sysctl knobs, they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. - tcp_retries1 - tcp_retries2 - tcp_orphan_retries - tcp_fin_timeout Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29tcp/dccp: Fix a data-race around sysctl_tcp_fwmark_accept.Kuniyuki Iwashima
[ Upstream commit 1a0008f9df59451d0a17806c1ee1a19857032fa8 ] While reading sysctl_tcp_fwmark_accept, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 84f39b08d786 ("net: support marking accepting TCP sockets") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29ip: Fix a data-race around sysctl_fwmark_reflect.Kuniyuki Iwashima
[ Upstream commit 85d0b4dbd74b95cc492b1f4e34497d3f894f5d9a ] While reading sysctl_fwmark_reflect, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: e110861f8609 ("net: add a sysctl to reflect the fwmark on replies") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29ip: Fix data-races around sysctl_ip_nonlocal_bind.Kuniyuki Iwashima
[ Upstream commit 289d3b21fb0bfc94c4e98f10635bba1824e5f83c ] While reading sysctl_ip_nonlocal_bind, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29ip: Fix data-races around sysctl_ip_fwd_use_pmtu.Kuniyuki Iwashima
[ Upstream commit 60c158dc7b1f0558f6cadd5b50d0386da0000d50 ] While reading sysctl_ip_fwd_use_pmtu, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: f87c10a8aa1e ("ipv4: introduce ip_dst_mtu_maybe_forward and protect forwarding path against pmtu spoofing") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21net: Fix data-races around sysctl_mem.Kuniyuki Iwashima
[ Upstream commit 310731e2f1611d1d13aae237abcf8e66d33345d5 ] While reading .sysctl_mem, it can be changed concurrently. So, we need to add READ_ONCE() to avoid data-races. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21cgroup: Use separate src/dst nodes when preloading css_sets for migrationTejun Heo
commit 07fd5b6cdf3cc30bfde8fe0f644771688be04447 upstream. Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time. Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1: #1> mkdir -p /sys/fs/cgroup/misc/a/b #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & #4> PID=$! #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one. After #3, let's say the whole process was in cset A, and that after #4, the leader moves to cset B. Then, during #6, the following happens: 1. cgroup_migrate_add_src() is called on B for the leader. 2. cgroup_migrate_add_src() is called on A for the other threads. 3. cgroup_migrate_prepare_dst() is called. It scans the src list. 4. It notices that B wants to migrate to A, so it tries to A to the dst list but realizes that its ->mg_preload_node is already busy. 5. and then it notices A wants to migrate to A as it's an identity migration, it culls it by list_del_init()'ing its ->mg_preload_node and putting references accordingly. 6. The rest of migration takes place with B on the src list but nothing on the dst list. This means that A isn't held while migration is in progress. If all tasks leave A before the migration finishes and the incoming task pins it, the cset will be destroyed leading to use-after-free. This is caused by overloading cset->mg_preload_node for both src and dst preload lists. We wanted to exclude the cset from the src list but ended up inadvertently excluding it from the dst list too. This patch fixes the issue by separating out cset->mg_preload_node into ->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst preloadings don't interfere with each other. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Mukesh Ojha <quic_mojha@quicinc.com> Reported-by: shisiyuan <shisiyuan19870131@gmail.com> Link: http://lkml.kernel.org/r/1654187688-27411-1-git-send-email-shisiyuan@xiaomi.com Link: https://www.spinics.net/lists/cgroups/msg33313.html Fixes: f817de98513d ("cgroup: prepare migration path for unified hierarchy") Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-21net: sock: tracing: Fix sock_exceed_buf_limit not to dereference stale pointerSteven Rostedt (Google)
commit 820b8963adaea34a87abbecb906d1f54c0aabfb7 upstream. The trace event sock_exceed_buf_limit saves the prot->sysctl_mem pointer and then dereferences it in the TP_printk() portion. This is unsafe as the TP_printk() portion is executed at the time the buffer is read. That is, it can be seconds, minutes, days, months, even years later. If the proto is freed, then this dereference will can also lead to a kernel crash. Instead, save the sysctl_mem array into the ring buffer and have the TP_printk() reference that instead. This is the proper and safe way to read pointers in trace events. Link: https://lore.kernel.org/all/20220706052130.16368-12-kuniyu@amazon.com/ Cc: stable@vger.kernel.org Fixes: 3847ce32aea9f ("core: add tracepoints for queueing skb to rcvbuf") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-12misc: rtsx_usb: use separate command and response buffersShuah Khan
commit 3776c78559853fd151be7c41e369fd076fb679d5 upstream. rtsx_usb uses same buffer for command and response. There could be a potential conflict using the same buffer for both especially if retries and timeouts are involved. Use separate command and response buffers to avoid conflicts. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/07e3721804ff07aaab9ef5b39a5691d0718b9ade.1656642167.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-12misc: rtsx_usb: fix use of dma mapped buffer for usb bulk transferShuah Khan
commit eb7f8e28420372787933eec079735c35034bda7d upstream. rtsx_usb driver allocates coherent dma buffer for urb transfers. This buffer is passed to usb_bulk_msg() and usb core tries to map already mapped buffer running into a dma mapping error. xhci_hcd 0000:01:00.0: rejecting DMA map of vmalloc memory WARNING: CPU: 1 PID: 279 at include/linux/dma-mapping.h:326 usb_ hcd_map_urb_for_dma+0x7d6/0x820 ... xhci_map_urb_for_dma+0x291/0x4e0 usb_hcd_submit_urb+0x199/0x12b0 ... usb_submit_urb+0x3b8/0x9e0 usb_start_wait_urb+0xe3/0x2d0 usb_bulk_msg+0x115/0x240 rtsx_usb_transfer_data+0x185/0x1a8 [rtsx_usb] rtsx_usb_send_cmd+0xbb/0x123 [rtsx_usb] rtsx_usb_write_register+0x12c/0x143 [rtsx_usb] rtsx_usb_probe+0x226/0x4b2 [rtsx_usb] Fix it to use kmalloc() to get DMA-able memory region instead. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/667d627d502e1ba9ff4f9b94966df3299d2d3c0d.1656642167.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-12video: of_display_timing.h: include errno.hHsin-Yi Wang
commit 3663a2fb325b8782524f3edb0ae32d6faa615109 upstream. If CONFIG_OF is not enabled, default of_get_display_timing() returns an errno, so include the header. Fixes: 422b67e0b31a ("videomode: provide dummy inline functions for !CONFIG_OF") Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-12esp: limit skb_page_frag_refill use to a single pageSabrina Dubroca
commit 5bd8baab087dff657e05387aee802e70304cc813 upstream. Commit ebe48d368e97 ("esp: Fix possible buffer overflow in ESP transformation") tried to fix skb_page_frag_refill usage in ESP by capping allocsize to 32k, but that doesn't completely solve the issue, as skb_page_frag_refill may return a single page. If that happens, we will write out of bounds, despite the check introduced in the previous patch. This patch forces COW in cases where we would end up calling skb_page_frag_refill with a size larger than a page (first in esp_output_head with tailen, then in esp_output_tail with skb->data_len). Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-02kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]Naveen N. Rao
commit 3e35142ef99fe6b4fe5d834ad43ee13cca10a2dc upstream. Since commit d1bcae833b32f1 ("ELF: Don't generate unused section symbols") [1], binutils (v2.36+) started dropping section symbols that it thought were unused. This isn't an issue in general, but with kexec_file.c, gcc is placing kexec_arch_apply_relocations[_add] into a separate .text.unlikely section and the section symbol ".text.unlikely" is being dropped. Due to this, recordmcount is unable to find a non-weak symbol in .text.unlikely to generate a relocation record against. Address this by dropping the weak attribute from these functions. Instead, follow the existing pattern of having architectures #define the name of the function they want to override in their headers. [1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1 [akpm@linux-foundation.org: arch/s390/include/asm/kexec.h needs linux/module.h] Link: https://lkml.kernel.org/r/20220519091237.676736-1-naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-02random: quiet urandom warning ratelimit suppression messageJason A. Donenfeld
commit c01d4d0a82b71857be7449380338bc53dde2da92 upstream. random.c ratelimits how much it warns about uninitialized urandom reads using __ratelimit(). When the RNG is finally initialized, it prints the number of missed messages due to ratelimiting. It has been this way since that functionality was introduced back in 2018. Recently, cc1e127bfa95 ("random: remove ratelimiting for in-kernel unseeded randomness") put a bit more stress on the urandom ratelimiting, which teased out a bug in the implementation. Specifically, when under pressure, __ratelimit() will print its own message and reset the count back to 0, making the final message at the end less useful. Secondly, it does so as a pr_warn(), which apparently is undesirable for people's CI. Fortunately, __ratelimit() has the RATELIMIT_MSG_ON_RELEASE flag exactly for this purpose, so we set the flag. Fixes: 4e00b339e264 ("random: rate limit unseeded randomness warnings") Cc: stable@vger.kernel.org Reported-by: Jon Hunter <jonathanh@nvidia.com> Reported-by: Ron Economos <re@w6rz.net> Tested-by: Ron Economos <re@w6rz.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-02ata: libata: add qc->flags in ata_qc_complete_template tracepointEdward Wu
commit 540a92bfe6dab7310b9df2e488ba247d784d0163 upstream. Add flags value to check the result of ata completion Fixes: 255c03d15a29 ("libata: Add tracepoints") Cc: stable@vger.kernel.org Signed-off-by: Edward Wu <edwardwu@realtek.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-02vt: drop old FONT ioctlsJiri Slaby
commit ff2047fb755d4415ec3c70ac799889371151796d upstream. Drop support for these ioctls: * PIO_FONT, PIO_FONTX * GIO_FONT, GIO_FONTX * PIO_FONTRESET As was demonstrated by commit 90bfdeef83f1 (tty: make FONTX ioctl use the tty pointer they were actually passed), these ioctls are not used from userspace, as: 1) they used to be broken (set up font on current console, not the open one) and racy (before the commit above) 2) KDFONTOP ioctl is used for years instead Note that PIO_FONTRESET is defunct on most systems as VGA_CONSOLE is set on them for ages. That turns on BROKEN_GRAPHICS_PROGRAMS which makes PIO_FONTRESET just return an error. We are removing KD_FONT_FLAG_OLD here as it was used only by these removed ioctls. kd.h header exists both in kernel and uapi headers, so we can remove the kernel one completely. Everyone includeing kd.h will now automatically get the uapi one. There are now unused definitions of the ioctl numbers and "struct consolefontdesc" in kd.h, but as it is a uapi header, I am not touching these. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210105120239.28031-8-jslaby@suse.cz Cc: guodaxing <guodaxing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-25random: mark bootloader randomness code as __initJason A. Donenfeld
commit 39e0f991a62ed5efabd20711a7b6e7da92603170 upstream. add_bootloader_randomness() and the variables it touches are only used during __init and not after, so mark these as __init. At the same time, unexport this, since it's only called by other __init code that's built-in. Cc: stable@vger.kernel.org Fixes: 428826f5358c ("fdt: add support for rng-seed") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.3 (git 2.53.0) at 2026-04-18 13:07:45 +0000