| Age | Commit message (Collapse) | Author |
|---|
|
commit 0764db9b49c932b89ee4d9e3236dff4bb07b4a66 upstream.
Alexander reported a circular lock dependency revealed by the mmap1 ltp
test:
LOCKDEP_CIRCULAR (suite: ltp, case: mtest06 (mmap1))
WARNING: possible circular locking dependency detected
5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1 Not tainted
------------------------------------------------------
mmap1/202299 is trying to acquire lock:
00000001892c0188 (css_set_lock){..-.}-{2:2}, at: obj_cgroup_release+0x4a/0xe0
but task is already holding lock:
00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&sighand->siglock){-.-.}-{2:2}:
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
__lock_task_sighand+0x90/0x190
cgroup_freeze_task+0x2e/0x90
cgroup_migrate_execute+0x11c/0x608
cgroup_update_dfl_csses+0x246/0x270
cgroup_subtree_control_write+0x238/0x518
kernfs_fop_write_iter+0x13e/0x1e0
new_sync_write+0x100/0x190
vfs_write+0x22c/0x2d8
ksys_write+0x6c/0xf8
__do_syscall+0x1da/0x208
system_call+0x82/0xb0
-> #0 (css_set_lock){..-.}-{2:2}:
check_prev_add+0xe0/0xed8
validate_chain+0x736/0xb20
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
obj_cgroup_release+0x4a/0xe0
percpu_ref_put_many.constprop.0+0x150/0x168
drain_obj_stock+0x94/0xe8
refill_obj_stock+0x94/0x278
obj_cgroup_charge+0x164/0x1d8
kmem_cache_alloc+0xac/0x528
__sigqueue_alloc+0x150/0x308
__send_signal+0x260/0x550
send_signal+0x7e/0x348
force_sig_info_to_task+0x104/0x180
force_sig_fault+0x48/0x58
__do_pgm_check+0x120/0x1f0
pgm_check_handler+0x11e/0x180
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sighand->siglock);
lock(css_set_lock);
lock(&sighand->siglock);
lock(css_set_lock);
*** DEADLOCK ***
2 locks held by mmap1/202299:
#0: 00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
#1: 00000001892ad560 (rcu_read_lock){....}-{1:2}, at: percpu_ref_put_many.constprop.0+0x0/0x168
stack backtrace:
CPU: 15 PID: 202299 Comm: mmap1 Not tainted 5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
dump_stack_lvl+0x76/0x98
check_noncircular+0x136/0x158
check_prev_add+0xe0/0xed8
validate_chain+0x736/0xb20
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
obj_cgroup_release+0x4a/0xe0
percpu_ref_put_many.constprop.0+0x150/0x168
drain_obj_stock+0x94/0xe8
refill_obj_stock+0x94/0x278
obj_cgroup_charge+0x164/0x1d8
kmem_cache_alloc+0xac/0x528
__sigqueue_alloc+0x150/0x308
__send_signal+0x260/0x550
send_signal+0x7e/0x348
force_sig_info_to_task+0x104/0x180
force_sig_fault+0x48/0x58
__do_pgm_check+0x120/0x1f0
pgm_check_handler+0x11e/0x180
INFO: lockdep is turned off.
In this example a slab allocation from __send_signal() caused a
refilling and draining of a percpu objcg stock, resulted in a releasing
of another non-related objcg. Objcg release path requires taking the
css_set_lock, which is used to synchronize objcg lists.
This can create a circular dependency with the sighandler lock, which is
taken with the locked css_set_lock by the freezer code (to freeze a
task).
In general it seems that using css_set_lock to synchronize objcg lists
makes any slab allocations and deallocation with the locked css_set_lock
and any intervened locks risky.
To fix the problem and make the code more robust let's stop using
css_set_lock to synchronize objcg lists and use a new dedicated spinlock
instead.
Link: https://lkml.kernel.org/r/Yfm1IHmoGdyUR81T@carbon.dhcp.thefacebook.com
Fixes: bf4f059954dc ("mm: memcg/slab: obj_cgroup API")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9eeabdf17fa0ab75381045c867c370f4cc75a613 ]
When uncloning an skb dst and its associated metadata, a new
dst+metadata is allocated and later replaces the old one in the skb.
This is helpful to have a non-shared dst+metadata attached to a specific
skb.
The issue is the uncloned dst+metadata is initialized with a refcount of
1, which is increased to 2 before attaching it to the skb. When
tun_dst_unclone returns, the dst+metadata is only referenced from a
single place (the skb) while its refcount is 2. Its refcount will never
drop to 0 (when the skb is consumed), leading to a memory leak.
Fix this by removing the call to dst_hold in tun_dst_unclone, as the
dst+metadata refcount is already 1.
Fixes: fc4099f17240 ("openvswitch: Fix egress tunnel info.")
Cc: Pravin B Shelar <pshelar@ovn.org>
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cfc56f85e72f5b9c5c5be26dc2b16518d36a7868 ]
When uncloning an skb dst and its associated metadata a new dst+metadata
is allocated and the tunnel information from the old metadata is copied
over there.
The issue is the tunnel metadata has references to cached dst, which are
copied along the way. When a dst+metadata refcount drops to 0 the
metadata is freed including the cached dst entries. As they are also
referenced in the initial dst+metadata, this ends up in UaFs.
In practice the above did not happen because of another issue, the
dst+metadata was never freed because its refcount never dropped to 0
(this will be fixed in a subsequent patch).
Fix this by initializing the dst cache after copying the tunnel
information from the old metadata to also unshare the dst cache.
Fixes: d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel")
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d1ca60efc53d665cf89ed847a14a510a81770b81 ]
When userspace, e.g. conntrackd, inserts an entry with a specified helper,
its possible that the helper is lost immediately after its added:
ctnetlink_create_conntrack
-> nf_ct_helper_ext_add + assign helper
-> ctnetlink_setup_nat
-> ctnetlink_parse_nat_setup
-> parse_nat_setup -> nfnetlink_parse_nat_setup
-> nf_nat_setup_info
-> nf_conntrack_alter_reply
-> __nf_ct_try_assign_helper
... and __nf_ct_try_assign_helper will zero the helper again.
Set IPS_HELPER bit to bypass auto-assign logic, its unwanted, just like
when helper is assigned via ruleset.
Dropped old 'not strictly necessary' comment, it referred to use of
rcu_assign_pointer() before it got replaced by RCU_INIT_POINTER().
NB: Fixes tag intentionally incorrect, this extends the referenced commit,
but this change won't build without IPS_HELPER introduced there.
Fixes: 6714cf5465d280 ("netfilter: nf_conntrack: fix explicit helper attachment and NAT")
Reported-by: Pham Thanh Tuyen <phamtyn@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e1d2699b96793d19388e302fa095e0da2c145701 ]
If we've reached the end of the directory, then cache that information
in the context so that we don't need to do an uncached readdir in order
to rediscover that fact.
Fixes: 794092c57f89 ("NFS: Do uncached readdir when we're seeking a cookie in an empty page cache")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit cb1f65c1e1424a4b5e4a86da8aa3b8fd8459c8ec upstream.
After commit e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race
related to the EC GPE") wakeup interrupts occurring immediately after
the one discarded by acpi_s2idle_wake() may be missed. Moreover, if
the SCI triggers again immediately after the rearming in
acpi_s2idle_wake(), that wakeup may be missed too.
The problem is that pm_system_irq_wakeup() only calls pm_system_wakeup()
when pm_wakeup_irq is 0, but that's not the case any more after the
interrupt causing acpi_s2idle_wake() to run until pm_wakeup_irq is
cleared by the pm_wakeup_clear() call in s2idle_loop(). However,
there may be wakeup interrupts occurring in that time frame and if
that happens, they will be missed.
To address that issue first move the clearing of pm_wakeup_irq to
the point at which it is known that the interrupt causing
acpi_s2idle_wake() to tun will be discarded, before rearming the SCI
for wakeup. Moreover, because that only reduces the size of the
time window in which the issue may manifest itself, allow
pm_system_irq_wakeup() to register two second wakeup interrupts in
a row and, when discarding the first one, replace it with the second
one. [Of course, this assumes that only one wakeup interrupt can be
discarded in one go, but currently that is the case and I am not
aware of any plans to change that.]
Fixes: e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race related to the EC GPE")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 33569ef3c754a82010f266b7b938a66a3ccf90a4 ]
It is an unused wrapper forcing kmalloc allocation for registering
nosave regions. Also, rename __register_nosave_region() to
register_nosave_region() now that there is no need for disambiguation.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1976b2b31462151403c9fc110204fcc2a77bdfd1 ]
Query the server for other possible trunkable locations for a given
file system on a 4.1+ mount.
v2:
-- added missing static to nfs4_discover_trunking,
reported by the kernel test robot
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8a59bb93b7e3cca389af44781a429ac12ac49be6 ]
Define and store if server returns it supports fs_locations attribute
as a capability.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b5e7b59c3480f355910f9d2c6ece5857922a5e54 ]
Currently the nfs_access_get_cached family of functions report a
'struct nfs_access_entry' as the result, with both .mask and .cred set.
However the .cred is never used. This is probably good and there is no
guarantee that it won't be freed before use.
Change to only report the 'mask' - as this is all that is used or needed.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit fda17afc6166e975bec1197bd94cd2a3317bce3f upstream.
The concurrent positioning ranges log page 47h is a general purpose log
page and not a subpage of the indentify device log. Using
ata_identify_page_supported() to test for concurrent positioning ranges
support is thus wrong. ata_log_supported() must be used.
Furthermore, unlike other advanced ATA features (e.g. NCQ priority),
accesses to the concurrent positioning ranges log page are not gated by
a feature bit from the device IDENTIFY data. Since many older drives
react badly to the READ LOG EXT and/or READ LOG DMA EXT commands isued
to read device log pages, avoid problems with older drives by limiting
the concurrent positioning ranges support detection to drives
implementing at least the ACS-4 ATA standard (major version 11). This
additional condition effectively turns ata_dev_config_cpr() into a nop
for older drives, avoiding problems in the field.
Fixes: fe22e1c2f705 ("libata: support concurrent positioning ranges log")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215519
Cc: stable@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Abderraouf Adjal <adjal.arf@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ef9989afda73332df566852d6e9ca695c05f10ce upstream.
When transitioning to/from guest mode, it is necessary to inform
lockdep, tracing, and RCU in a specific order, similar to the
requirements for transitions to/from user mode. Additionally, it is
necessary to perform vtime accounting for a window around running the
guest, with RCU enabled, such that timer interrupts taken from the guest
can be accounted as guest time.
Most architectures don't handle all the necessary pieces, and a have a
number of common bugs, including unsafe usage of RCU during the window
between guest_enter() and guest_exit().
On x86, this was dealt with across commits:
87fa7f3e98a1310e ("x86/kvm: Move context tracking where it belongs")
0642391e2139a2c1 ("x86/kvm/vmx: Add hardirq tracing to guest enter/exit")
9fc975e9efd03e57 ("x86/kvm/svm: Add hardirq tracing on guest enter/exit")
3ebccdf373c21d86 ("x86/kvm/vmx: Move guest enter/exit into .noinstr.text")
135961e0a7d555fc ("x86/kvm/svm: Move guest enter/exit into .noinstr.text")
160457140187c5fb ("KVM: x86: Defer vtime accounting 'til after IRQ handling")
bc908e091b326467 ("KVM: x86: Consolidate guest enter/exit logic to common helpers")
... but those fixes are specific to x86, and as the resulting logic
(while correct) is split across generic helper functions and
x86-specific helper functions, it is difficult to see that the
entry/exit accounting is balanced.
This patch adds generic helpers which architectures can use to handle
guest entry/exit consistently and correctly. The guest_{enter,exit}()
helpers are split into guest_timing_{enter,exit}() to perform vtime
accounting, and guest_context_{enter,exit}() to perform the necessary
context tracking and RCU management. The existing guest_{enter,exit}()
heleprs are left as wrappers of these.
Atop this, new guest_state_enter_irqoff() and guest_state_exit_irqoff()
helpers are added to handle the ordering of lockdep, tracing, and RCU
manageent. These are inteneded to mirror exit_to_user_mode() and
enter_from_user_mode().
Subsequent patches will migrate architectures over to the new helpers,
following a sequence:
guest_timing_enter_irqoff();
guest_state_enter_irqoff();
< run the vcpu >
guest_state_exit_irqoff();
< take any pending IRQs >
guest_timing_exit_irqoff();
This sequences handles all of the above correctly, and more clearly
balances the entry and exit portions, making it easier to understand.
The existing helpers are marked as deprecated, and will be removed once
all architectures have been converted.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Message-Id: <20220201132926.3301912-2-mark.rutland@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
neigh_managed_work
commit 4a81f6da9cb2d1ef911131a6fd8bd15cb61fc772 upstream.
syzkaller was able to trigger a deadlock for NTF_MANAGED entries [0]:
kworker/0:16/14617 is trying to acquire lock:
ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652
[...]
but task is already holding lock:
ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: neigh_managed_work+0x35/0x250 net/core/neighbour.c:1572
The neighbor entry turned to NUD_FAILED state, where __neigh_event_send()
triggered an immediate probe as per commit cd28ca0a3dd1 ("neigh: reduce
arp latency") via neigh_probe() given table lock was held.
One option to fix this situation is to defer the neigh_probe() back to
the neigh_timer_handler() similarly as pre cd28ca0a3dd1. For the case
of NTF_MANAGED, this deferral is acceptable given this only happens on
actual failure state and regular / expected state is NUD_VALID with the
entry already present.
The fix adds a parameter to __neigh_event_send() in order to communicate
whether immediate probe is allowed or disallowed. Existing call-sites
of neigh_event_send() default as-is to immediate probe. However, the
neigh_managed_work() disables it via use of neigh_event_send_probe().
[0] <TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_deadlock_bug kernel/locking/lockdep.c:2956 [inline]
check_deadlock kernel/locking/lockdep.c:2999 [inline]
validate_chain kernel/locking/lockdep.c:3788 [inline]
__lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5027
lock_acquire kernel/locking/lockdep.c:5639 [inline]
lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5604
__raw_write_lock_bh include/linux/rwlock_api_smp.h:202 [inline]
_raw_write_lock_bh+0x2f/0x40 kernel/locking/spinlock.c:334
___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652
ip6_finish_output2+0x1070/0x14f0 net/ipv6/ip6_output.c:123
__ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
__ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170
ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224
dst_output include/net/dst.h:451 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
ndisc_send_skb+0xa99/0x17f0 net/ipv6/ndisc.c:508
ndisc_send_ns+0x3a9/0x840 net/ipv6/ndisc.c:650
ndisc_solicit+0x2cd/0x4f0 net/ipv6/ndisc.c:742
neigh_probe+0xc2/0x110 net/core/neighbour.c:1040
__neigh_event_send+0x37d/0x1570 net/core/neighbour.c:1201
neigh_event_send include/net/neighbour.h:470 [inline]
neigh_managed_work+0x162/0x250 net/core/neighbour.c:1574
process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307
worker_thread+0x657/0x1110 kernel/workqueue.c:2454
kthread+0x2e9/0x3a0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
Fixes: 7482e3841d52 ("net, neigh: Add NTF_MANAGED flag for managed neighbor entries")
Reported-by: syzbot+5239d0e1778a500d477a@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Tested-by: syzbot+5239d0e1778a500d477a@syzkaller.appspotmail.com
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220201193942.5055-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
TODO list)"
commit 1148836fd3226c20de841084aba24184d4fbbe77 upstream.
This reverts commit b3ec8cdf457e5e63d396fe1346cc788cf7c1b578.
Revert the second (of 2) commits which disabled scrolling acceleration
in fbcon/fbdev. It introduced a regression for fbdev-supported graphic
cards because of the performance penalty by doing screen scrolling by
software instead of using the existing graphic card 2D hardware
acceleration.
Console scrolling acceleration was disabled by dropping code which
checked at runtime the driver hardware capabilities for the
BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it
enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move
screen contents. After dropping those checks scrollmode was hard-wired
to SCROLL_REDRAW instead, which forces all graphic cards to redraw every
character at the new screen position when scrolling.
This change effectively disabled all hardware-based scrolling acceleration for
ALL drivers, because now all kind of 2D hardware acceleration (bitblt,
fillrect) in the drivers isn't used any longer.
The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm
and gma500) used hardware acceleration in the past and thus code for checking
and using scrolling acceleration is obsolete.
This statement is NOT TRUE, because beside the DRM drivers there are around 35
other fbdev drivers which depend on fbdev/fbcon and still provide hardware
acceleration for fbdev/fbcon.
The original commit message also states that syzbot found lots of bugs in fbcon
and thus it's "often the solution to just delete code and remove features".
This is true, and the bugs - which actually affected all users of fbcon,
including DRM - were fixed, or code was dropped like e.g. the support for
software scrollback in vgacon (commit 973c096f6a85).
So to further analyze which bugs were found by syzbot, I've looked through all
patches in drivers/video which were tagged with syzbot or syzkaller back to
year 2005. The vast majority fixed the reported issues on a higher level, e.g.
when screen is to be resized, or when font size is to be changed. The few ones
which touched driver code fixed a real driver bug, e.g. by adding a check.
But NONE of those patches touched code of either the SCROLL_MOVE or the
SCROLL_REDRAW case.
That means, there was no real reason why SCROLL_MOVE had to be ripped-out and
just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far
was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it
could go away. That argument completely missed the fact that SCROLL_MOVE is
still heavily used by fbdev (non-DRM) drivers.
Some people mention that using memcpy() instead of the hardware acceleration is
pretty much the same speed. But that's not true, at least not for older graphic
cards and machines where we see speed decreases by factor 10 and more and thus
this change leads to console responsiveness way worse than before.
That's why the original commit is to be reverted. By reverting we
reintroduce hardware-based scrolling acceleration and fix the
performance regression for fbdev drivers.
There isn't any impact on DRM when reverting those patches.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-2-deller@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 314c459a6fe0957b5885fbc65c53d51444092880 upstream.
Since commit 974b9b2c68f3 ("mm: consolidate pte_index() and
pte_offset_*() definitions") pte_index is a static inline and there is
no define for it that can be recognized by the preprocessor. As a
result, vm_insert_pages() uses slower loop over vm_insert_page() instead
of insert_pages() that amortizes the cost of spinlock operations when
inserting multiple pages.
Link: https://lkml.kernel.org/r/20220111145457.20748-1-rppt@kernel.org
Fixes: 974b9b2c68f3 ("mm: consolidate pte_index() and pte_offset_*() definitions")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: Christian Dietrich <stettberger@dokucode.de>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ac9f0c810684a1b161c18eb4b91ce84cbc13c91d upstream.
06f6c4c6c3e8 ("ata: libata: add missing ata_identify_page_supported() calls")
introduced additional calls to ata_identify_page_supported(), thus also
adding indirectly accesses to the device log directory log page through
ata_log_supported(). Reading this log page causes SATADOM-ML 3ME devices
to lock up.
Introduce the horkage flag ATA_HORKAGE_NO_LOG_DIR to prevent accesses to
the log directory in ata_log_supported() and add a blacklist entry
with this flag for "SATADOM-ML 3ME" devices.
Fixes: 636f6e2af4fb ("libata: add horkage for missing Identify Device log")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 06feec6005c9d9500cd286ec440aabf8b2ddd94d upstream.
Correct size of iec_status array by changing it to the size of status
array of the struct snd_aes_iec958. This fixes out-of-bounds slab
read accesses made by memcpy() of the hdmi-codec driver. This problem
is reported by KASAN.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20220112195039.1329-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 51e50fbd3efc6064c30ed73a5e009018b36e290a upstream.
When CONFIG_CGROUPS is disabled psi code generates the following
warnings:
kernel/sched/psi.c:1112:21: warning: no previous prototype for 'psi_trigger_create' [-Wmissing-prototypes]
1112 | struct psi_trigger *psi_trigger_create(struct psi_group *group,
| ^~~~~~~~~~~~~~~~~~
kernel/sched/psi.c:1182:6: warning: no previous prototype for 'psi_trigger_destroy' [-Wmissing-prototypes]
1182 | void psi_trigger_destroy(struct psi_trigger *t)
| ^~~~~~~~~~~~~~~~~~~
kernel/sched/psi.c:1249:10: warning: no previous prototype for 'psi_trigger_poll' [-Wmissing-prototypes]
1249 | __poll_t psi_trigger_poll(void **trigger_ptr,
| ^~~~~~~~~~~~~~~~
Change the declarations of these functions in the header to provide the
prototypes even when they are unused.
Link: https://lkml.kernel.org/r/20220119223940.787748-2-surenb@google.com
Fixes: 0e94682b73bf ("psi: introduce psi monitor")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3c42b2019863b327caa233072c50739d4144dd16 ]
./include/net/route.h:373:48: warning: incorrect type in argument 2 (different base types)
./include/net/route.h:373:48: expected unsigned int [usertype] key
./include/net/route.h:373:48: got restricted __be32 [usertype] daddr
Fixes: 5c9f7c1dfc2e ("ipv4: Add helpers for neigh lookup for nexthop")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220127013404.1279313-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 36268983e90316b37000a005642af42234dabb36 ]
This reverts commit b75326c201242de9495ff98e5d5cff41d7fc0d9d.
This commit breaks Linux compatibility with USGv6 tests. The RFC this
commit was based on is actually an expired draft: no published RFC
currently allows the new behaviour it introduced.
Without full IETF endorsement, the flash renumbering scenario this
patch was supposed to enable is never going to work, as other IPv6
equipements on the same LAN will keep the 2 hours limit.
Fixes: b75326c20124 ("ipv6: Honor all IPv6 PIO Valid Lifetime values")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e2f08207c558bc0bc8abaa557cdb29bad776ac7b ]
The link extended sub-states are assigned as enum that is an integer
size but read from a union as u8, this is working for small values on
little endian systems but for big endian this always give 0. Fix the
variable in the union to match the enum size.
Fixes: ecc31c60240b ("ethtool: Add link extended state")
Signed-off-by: Moshe Tal <moshet@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 09f5e7dc7ad705289e1b1ec065439aa3c42951c4 ]
Time readers that cannot take locks (due to NMI etc..) currently make
use of perf_event::shadow_ctx_time, which, for that event gives:
time' = now + (time - timestamp)
or, alternatively arranged:
time' = time + (now - timestamp)
IOW, the progression of time since the last time the shadow_ctx_time
was updated.
There's problems with this:
A) the shadow_ctx_time is per-event, even though the ctx_time it
reflects is obviously per context. The direct concequence of this
is that the context needs to iterate all events all the time to
keep the shadow_ctx_time in sync.
B) even with the prior point, the context itself might not be active
meaning its time should not advance to begin with.
C) shadow_ctx_time isn't consistently updated when ctx_time is
There are 3 users of this stuff, that suffer differently from this:
- calc_timer_values()
- perf_output_read()
- perf_event_update_userpage() /* A */
- perf_event_read_local() /* A,B */
In particular, perf_output_read() doesn't suffer at all, because it's
sample driven and hence only relevant when the event is actually
running.
This same was supposed to be true for perf_event_update_userpage(),
after all self-monitoring implies the context is active *HOWEVER*, as
per commit f79256532682 ("perf/core: fix userpage->time_enabled of
inactive events") this goes wrong when combined with counter
overcommit, in that case those events that do not get scheduled when
the context becomes active (task events typically) miss out on the
EVENT_TIME update and ENABLED time is inflated (for a little while)
with the time the context was inactive. Once the event gets rotated
in, this gets corrected, leading to a non-monotonic timeflow.
perf_event_read_local() made things even worse, it can request time at
any point, suffering all the problems perf_event_update_userpage()
does and more. Because while perf_event_update_userpage() is limited
by the context being active, perf_event_read_local() users have no
such constraint.
Therefore, completely overhaul things and do away with
perf_event::shadow_ctx_time. Instead have regular context time updates
keep track of this offset directly and provide perf_event_time_now()
to complement perf_event_time().
perf_event_time_now() will, in adition to being context wide, also
take into account if the context is active. For inactive context, it
will not advance time.
This latter property means the cgroup perf_cgroup_info context needs
to grow addition state to track this.
Additionally, since all this is strictly per-cpu, we can use barrier()
to order context activity vs context time.
Fixes: 7d9285e82db5 ("perf/bpf: Extend the perf_event_read_local() interface, a.k.a. "bpf: perf event change needed for subsequent bpf helpers"")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Song Liu <song@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/YcB06DasOBtU0b00@hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aed28b7a2d620cb5cd0c554cb889075c02e25e8e ]
Fixes: e26d9972720e ("SUNRPC: Clean up scheduling of autoclose")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit aafc2e3285c2d7a79b7ee15221c19fbeca7b1509 upstream.
struct fib6_node's fn_sernum field can be
read while other threads change it.
Add READ_ONCE()/WRITE_ONCE() annotations.
Do not change existing smp barriers in fib6_get_cookie_safe()
and __fib6_update_sernum_upto_root()
syzbot reported:
BUG: KCSAN: data-race in fib6_clean_node / inet6_csk_route_socket
write to 0xffff88813df62e2c of 4 bytes by task 1920 on cpu 1:
fib6_clean_node+0xc2/0x260 net/ipv6/ip6_fib.c:2178
fib6_walk_continue+0x38e/0x430 net/ipv6/ip6_fib.c:2112
fib6_walk net/ipv6/ip6_fib.c:2160 [inline]
fib6_clean_tree net/ipv6/ip6_fib.c:2240 [inline]
__fib6_clean_all+0x1a9/0x2e0 net/ipv6/ip6_fib.c:2256
fib6_flush_trees+0x6c/0x80 net/ipv6/ip6_fib.c:2281
rt_genid_bump_ipv6 include/net/net_namespace.h:488 [inline]
addrconf_dad_completed+0x57f/0x870 net/ipv6/addrconf.c:4230
addrconf_dad_work+0x908/0x1170
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
worker_thread+0x616/0xa70 kernel/workqueue.c:2454
kthread+0x1bf/0x1e0 kernel/kthread.c:359
ret_from_fork+0x1f/0x30
read to 0xffff88813df62e2c of 4 bytes by task 15701 on cpu 0:
fib6_get_cookie_safe include/net/ip6_fib.h:285 [inline]
rt6_get_cookie include/net/ip6_fib.h:306 [inline]
ip6_dst_store include/net/ip6_route.h:234 [inline]
inet6_csk_route_socket+0x352/0x3c0 net/ipv6/inet6_connection_sock.c:109
inet6_csk_xmit+0x91/0x1e0 net/ipv6/inet6_connection_sock.c:121
__tcp_transmit_skb+0x1323/0x1840 net/ipv4/tcp_output.c:1402
tcp_transmit_skb net/ipv4/tcp_output.c:1420 [inline]
tcp_write_xmit+0x1450/0x4460 net/ipv4/tcp_output.c:2680
__tcp_push_pending_frames+0x68/0x1c0 net/ipv4/tcp_output.c:2864
tcp_push+0x2d9/0x2f0 net/ipv4/tcp.c:725
mptcp_push_release net/mptcp/protocol.c:1491 [inline]
__mptcp_push_pending+0x46c/0x490 net/mptcp/protocol.c:1578
mptcp_sendmsg+0x9ec/0xa50 net/mptcp/protocol.c:1764
inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:643
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
kernel_sendmsg+0x97/0xd0 net/socket.c:745
sock_no_sendpage+0x84/0xb0 net/core/sock.c:3086
inet_sendpage+0x9d/0xc0 net/ipv4/af_inet.c:834
kernel_sendpage+0x187/0x200 net/socket.c:3492
sock_sendpage+0x5a/0x70 net/socket.c:1007
pipe_to_sendpage+0x128/0x160 fs/splice.c:364
splice_from_pipe_feed fs/splice.c:418 [inline]
__splice_from_pipe+0x207/0x500 fs/splice.c:562
splice_from_pipe fs/splice.c:597 [inline]
generic_splice_sendpage+0x94/0xd0 fs/splice.c:746
do_splice_from fs/splice.c:767 [inline]
direct_splice_actor+0x80/0xa0 fs/splice.c:936
splice_direct_to_actor+0x345/0x650 fs/splice.c:891
do_splice_direct+0x106/0x190 fs/splice.c:979
do_sendfile+0x675/0xc40 fs/read_write.c:1245
__do_sys_sendfile64 fs/read_write.c:1310 [inline]
__se_sys_sendfile64 fs/read_write.c:1296 [inline]
__x64_sys_sendfile64+0x102/0x140 fs/read_write.c:1296
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x0000026f -> 0x00000271
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 15701 Comm: syz-executor.2 Not tainted 5.16.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
The Fixes tag I chose is probably arbitrary, I do not think
we need to backport this patch to older kernels.
Fixes: c5cff8561d2d ("ipv6: add rcu grace period before freeing fib6_node")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220120174112.1126644-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 23f57406b82de51809d5812afd96f210f8b627f3 upstream.
ip_select_ident_segs() has been very conservative about using
the connected socket private generator only for packets with IP_DF
set, claiming it was needed for some VJ compression implementations.
As mentioned in this referenced document, this can be abused.
(Ref: Off-Path TCP Exploits of the Mixed IPID Assignment)
Before switching to pure random IPID generation and possibly hurt
some workloads, lets use the private inet socket generator.
Not only this will remove one vulnerability, this will also
improve performance of TCP flows using pmtudisc==IP_PMTUDISC_DONT
Fixes: 73f156a6e8c1 ("inetpeer: get rid of ip_id_count")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reported-by: Ray Che <xijiache@gmail.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 47934e06b65637c88a762d9c98329ae6e3238888 upstream.
In one net namespace, after creating a packet socket without binding
it to a device, users in other net namespaces can observe the new
`packet_type` added by this packet socket by reading `/proc/net/ptype`
file. This is minor information leakage as packet socket is
namespace aware.
Add a net pointer in `packet_type` to keep the net namespace of
of corresponding packet socket. In `ptype_seq_show`, this net pointer
must be checked when it is not NULL.
Fixes: 2feb27dbe00c ("[NETNS]: Minor information leak via /proc/net/ptype file.")
Signed-off-by: Congyu Liu <liu3101@purdue.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 945c37ed564770c78dfe6b9f08bed57a1b4e60ef upstream.
when CONFIG_USB_ROLE_SWITCH is not defined,
add usb_role_switch_find_by_fwnode() definition which return NULL.
Fixes: c6919d5e0cd1 ("usb: roles: Add usb_role_switch_find_by_fwnode()")
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/1641818608-25039-1-git-send-email-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 27fe73394a1c6d0b07fa4d95f1bca116d1cc66e9 upstream.
It has been reported that the tag setting operation on newly-allocated
pages can cause the page flags to be corrupted when performed
concurrently with other flag updates as a result of the use of
non-atomic operations.
Fix the problem by using a compare-exchange loop to update the tag.
Link: https://lkml.kernel.org/r/20220120020148.1632253-1-pcc@google.com
Link: https://linux-review.googlesource.com/id/I456b24a2b9067d93968d43b4bb3351c0cec63101
Fixes: 2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f23653fe64479d96910bfda2b700b1af17c991ac upstream.
Fix a user API regression introduced with commit f76edd8f7ce0 ("tty:
cyclades, remove this orphan"), which removed a part of the API and
caused compilation errors for user programs using said part, such as
GCC 9 in its libsanitizer component[1]:
.../libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.cc:160:10: fatal error: linux/cyclades.h: No such file or directory
160 | #include <linux/cyclades.h>
| ^~~~~~~~~~~~~~~~~~
compilation terminated.
make[4]: *** [Makefile:664: sanitizer_platform_limits_posix.lo] Error 1
As the absolute minimum required bring `struct cyclades_monitor' and
ioctl numbers back then so as to make the library build again. Add a
preprocessor warning as to the obsolescence of the features provided.
References:
[1] GCC PR sanitizer/100379, "cyclades.h is removed from linux kernel
header files", <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100379>
Fixes: f76edd8f7ce0 ("tty: cyclades, remove this orphan")
Cc: stable@vger.kernel.org # v5.13+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maciej W. Rozycki <macro@embecosm.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.20.2201260733430.11348@tpp.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e45c47d1f94e0cc7b6b079fdb4bcce2995e2adc4 upstream.
bio_start_io_acct_time() interface is like bio_start_io_acct() that
allows start_time to be passed in. This gives drivers the ability to
defer starting accounting until after IO is issued (but possibily not
entirely due to bio splitting).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220128155841.39644-2-snitzer@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7f5056b9e7b71149bf11073f00a57fa1ac2921a9 upstream.
A ceph user has reported that ceph is crashing with kernel NULL pointer
dereference. Following is the backtrace.
/proc/version: Linux version 5.16.2-arch1-1 (linux@archlinux) (gcc (GCC)
11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Thu, 20 Jan 2022
16:18:29 +0000
distro / arch: Arch Linux / x86_64
SELinux is not enabled
ceph cluster version: 16.2.7 (dd0603118f56ab514f133c8d2e3adfc983942503)
relevant dmesg output:
[ 30.947129] BUG: kernel NULL pointer dereference, address:
0000000000000000
[ 30.947206] #PF: supervisor read access in kernel mode
[ 30.947258] #PF: error_code(0x0000) - not-present page
[ 30.947310] PGD 0 P4D 0
[ 30.947342] Oops: 0000 [#1] PREEMPT SMP PTI
[ 30.947388] CPU: 5 PID: 778 Comm: touch Not tainted 5.16.2-arch1-1 #1
86fbf2c313cc37a553d65deb81d98e9dcc2a3659
[ 30.947486] Hardware name: Gigabyte Technology Co., Ltd. B365M
DS3H/B365M DS3H, BIOS F5 08/13/2019
[ 30.947569] RIP: 0010:strlen+0x0/0x20
[ 30.947616] Code: b6 07 38 d0 74 16 48 83 c7 01 84 c0 74 05 48 39 f7 75
ec 31 c0 31 d2 89 d6 89 d7 c3 48 89 f8 31 d2 89 d6 89 d7 c3 0
f 1f 40 00 <80> 3f 00 74 12 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 31
ff
[ 30.947782] RSP: 0018:ffffa4ed80ffbbb8 EFLAGS: 00010246
[ 30.947836] RAX: 0000000000000000 RBX: ffffa4ed80ffbc60 RCX:
0000000000000000
[ 30.947904] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
0000000000000000
[ 30.947971] RBP: ffff94b0d15c0ae0 R08: 0000000000000000 R09:
0000000000000000
[ 30.948040] R10: 0000000000000000 R11: 0000000000000000 R12:
0000000000000000
[ 30.948106] R13: 0000000000000001 R14: ffffa4ed80ffbc60 R15:
0000000000000000
[ 30.948174] FS: 00007fc7520f0740(0000) GS:ffff94b7ced40000(0000)
knlGS:0000000000000000
[ 30.948252] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 30.948308] CR2: 0000000000000000 CR3: 0000000104a40001 CR4:
00000000003706e0
[ 30.948376] Call Trace:
[ 30.948404] <TASK>
[ 30.948431] ceph_security_init_secctx+0x7b/0x240 [ceph
49f9c4b9bf5be8760f19f1747e26da33920bce4b]
[ 30.948582] ceph_atomic_open+0x51e/0x8a0 [ceph
49f9c4b9bf5be8760f19f1747e26da33920bce4b]
[ 30.948708] ? get_cached_acl+0x4d/0xa0
[ 30.948759] path_openat+0x60d/0x1030
[ 30.948809] do_filp_open+0xa5/0x150
[ 30.948859] do_sys_openat2+0xc4/0x190
[ 30.948904] __x64_sys_openat+0x53/0xa0
[ 30.948948] do_syscall_64+0x5c/0x90
[ 30.948989] ? exc_page_fault+0x72/0x180
[ 30.949034] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 30.949091] RIP: 0033:0x7fc7521e25bb
[ 30.950849] Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00
00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 0
0 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 54 24 28 64 48 2b 14
25
Core of the problem is that ceph checks for return code from
security_dentry_init_security() and if return code is 0, it assumes
everything is fine and continues to call strlen(name), which crashes.
Typically SELinux LSM returns 0 and sets name to "security.selinux" and
it is not a problem. Or if selinux is not compiled in or disabled, it
returns -EOPNOTSUP and ceph deals with it.
But somehow in this configuration, 0 is being returned and "name" is
not being initialized and that's creating the problem.
Our suspicion is that BPF LSM is registering a hook for
dentry_init_security() and returns hook default of 0.
LSM_HOOK(int, 0, dentry_init_security, struct dentry *dentry,...)
I have not been able to reproduce it just by doing CONFIG_BPF_LSM=y.
Stephen has tested the patch though and confirms it solves the problem
for him.
dentry_init_security() is written in such a way that it expects only one
LSM to register the hook. Atleast that's the expectation with current code.
If another LSM returns a hook and returns default, it will simply return
0 as of now and that will break ceph.
Hence, suggestion is that change semantics of this hook a bit. If there
are no LSMs or no LSM is taking ownership and initializing security context,
then return -EOPNOTSUP. Also allow at max one LSM to initialize security
context. This hook can't deal with multiple LSMs trying to init security
context. This patch implements this new behavior.
Reported-by: Stephen Muth <smuth4@gmail.com>
Tested-by: Stephen Muth <smuth4@gmail.com>
Suggested-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: <stable@vger.kernel.org> # 5.16.0
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a06247c6804f1a7c86a2e5398a4c1f1db1471848 upstream.
With write operation on psi files replacing old trigger with a new one,
the lifetime of its waitqueue is totally arbitrary. Overwriting an
existing trigger causes its waitqueue to be freed and pending poll()
will stumble on trigger->event_wait which was destroyed.
Fix this by disallowing to redefine an existing psi trigger. If a write
operation is used on a file descriptor with an already existing psi
trigger, the operation will fail with EBUSY error.
Also bypass a check for psi_disabled in the psi_trigger_destroy as the
flag can be flipped after the trigger is created, leading to a memory
leak.
Fixes: 0e94682b73bf ("psi: introduce psi monitor")
Reported-by: syzbot+cdb5dd11c97cc532efad@syzkaller.appspotmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Analyzed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220111232309.1786347-1-surenb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a37d9a17f099072fe4d3a9048b0321978707a918 upstream.
Apparently, there are some applications that use IN_DELETE event as an
invalidation mechanism and expect that if they try to open a file with
the name reported with the delete event, that it should not contain the
content of the deleted file.
Commit 49246466a989 ("fsnotify: move fsnotify_nameremove() hook out of
d_delete()") moved the fsnotify delete hook before d_delete() so fsnotify
will have access to a positive dentry.
This allowed a race where opening the deleted file via cached dentry
is now possible after receiving the IN_DELETE event.
To fix the regression, create a new hook fsnotify_delete() that takes
the unlinked inode as an argument and use a helper d_delete_notify() to
pin the inode, so we can pass it to fsnotify_delete() after d_delete().
Backporting hint: this regression is from v5.3. Although patch will
apply with only trivial conflicts to v5.4 and v5.10, it won't build,
because fsnotify_delete() implementation is different in each of those
versions (see fsnotify_link()).
A follow up patch will fix the fsnotify_unlink/rmdir() calls in pseudo
filesystem that do not need to call d_delete().
Link: https://lore.kernel.org/r/20220120215305.282577-1-amir73il@gmail.com
Reported-by: Ivan Delalande <colona@arista.com>
Link: https://lore.kernel.org/linux-fsdevel/YeNyzoDM5hP5LtGW@visor/
Fixes: 49246466a989 ("fsnotify: move fsnotify_nameremove() hook out of d_delete()")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb80445c438c78b40b547d12b8d56596ce4ccfeb upstream.
commit 56b765b79e9a ("htb: improved accuracy at high rates") broke
"overhead X", "linklayer atm" and "mpu X" attributes.
"overhead X" and "linklayer atm" have already been fixed. This restores
the "mpu X" handling, as might be used by DOCSIS or Ethernet shaping:
tc class add ... htb rate X overhead 4 mpu 64
The code being fixed is used by htb, tbf and act_police. Cake has its
own mpu handling. qdisc_calculate_pkt_len still uses the size table
containing values adjusted for mpu by user space.
iproute2 tc has always passed mpu into the kernel via a tc_ratespec
structure, but the kernel never directly acted on it, merely stored it
so that it could be read back by `tc class show`.
Rather, tc would generate length-to-time tables that included the mpu
(and linklayer) in their construction, and the kernel used those tables.
Since v3.7, the tables were no longer used. Along with "mpu", this also
broke "overhead" and "linklayer" which were fixed in 01cb71d2d47b
("net_sched: restore "overhead xxx" handling", v3.10) and 8a8e3d84b171
("net_sched: restore "linklayer atm" handling", v3.11).
"overhead" was fixed by simply restoring use of tc_ratespec::overhead -
this had originally been used by the kernel but was initially omitted
from the new non-table-based calculations.
"linklayer" had been handled in the table like "mpu", but the mode was
not originally passed in tc_ratespec. The new implementation was made to
handle it by getting new versions of tc to pass the mode in an extended
tc_ratespec, and for older versions of tc the table contents were analysed
at load time to deduce linklayer.
As "mpu" has always been given to the kernel in tc_ratespec,
accompanying the mpu-based table, we can restore system functionality
with no userspace change by making the kernel act on the tc_ratespec
value.
Fixes: 56b765b79e9a ("htb: improved accuracy at high rates")
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Vimalkumar <j.vimal@gmail.com>
Link: https://lore.kernel.org/r/20220112170210.1014351-1-kevin@bracey.fi
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 91341fa0003befd097e190ec2a4bf63ad957c49a upstream.
Both fields can be read/written without synchronization,
add proper accessors and documentation.
Fixes: d5dd88794a13 ("inet: fix various use-after-free in defrags units")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b7ec62d7ee0f0b8af6ba190501dff7f9ee6545ca upstream.
find_first_bit() and find_first_zero_bit() are not protected with
ifdefs as other functions in find.h. It causes build errors on some
platforms if CONFIG_GENERIC_FIND_FIRST_BIT is enabled.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Fixes: 2cc7b6a44ac2 ("lib: add fast path for find_first_*_bit() and find_last_bit()")
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ec3bb890817e4398f2d46e12e2e205495b116be9 upstream.
When there is no policy configured on the system, the default policy is
checked in xfrm_route_forward. However, it was done with the wrong
direction (XFRM_POLICY_FWD instead of XFRM_POLICY_OUT).
The default policy for XFRM_POLICY_FWD was checked just before, with a call
to xfrm[46]_policy_check().
CC: stable@vger.kernel.org
Fixes: 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 60115fa54ad7b913b7cb5844e6b7ffeb842d55f2 ]
Yongqiang reports a kmemleak panic when module insmod/rmmod with KASAN
enabled(without KASAN_VMALLOC) on x86[1].
When the module area allocates memory, it's kmemleak_object is created
successfully, but the KASAN shadow memory of module allocation is not
ready, so when kmemleak scan the module's pointer, it will panic due to
no shadow memory with KASAN check.
module_alloc
__vmalloc_node_range
kmemleak_vmalloc
kmemleak_scan
update_checksum
kasan_module_alloc
kmemleak_ignore
Note, there is no problem if KASAN_VMALLOC enabled, the modules area
entire shadow memory is preallocated. Thus, the bug only exits on ARCH
which supports dynamic allocation of module area per module load, for
now, only x86/arm64/s390 are involved.
Add a VM_DEFER_KMEMLEAK flags, defer vmalloc'ed object register of
kmemleak in module_alloc() to fix this issue.
[1] https://lore.kernel.org/all/6d41e2b9-4692-5ec4-b1cd-cbe29ae89739@huawei.com/
[wangkefeng.wang@huawei.com: fix build]
Link: https://lkml.kernel.org/r/20211125080307.27225-1-wangkefeng.wang@huawei.com
[akpm@linux-foundation.org: simplify ifdefs, per Andrey]
Link: https://lkml.kernel.org/r/CA+fCnZcnwJHUQq34VuRxpdoY6_XbJCDJ-jopksS5Eia4PijPzw@mail.gmail.com
Link: https://lkml.kernel.org/r/20211124142034.192078-1-wangkefeng.wang@huawei.com
Fixes: 793213a82de4 ("s390/kasan: dynamic shadow mem allocation for modules")
Fixes: 39d114ddc682 ("arm64: add KASAN support")
Fixes: bebf56a1b176 ("kasan: enable instrumentation of global variables")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reported-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 16720861675393a35974532b3c837d9fd7bfe08c ]
Avoid potentially hazardous memory copying and the needless use of
"%pIS" -- in the kernel, an RPC service listener is always bound to
ANYADDR. Having the network namespace is helpful when recording
errors, though.
Fixes: a0469f46faab ("SUNRPC: Replace dprintk call sites in TCP state change callouts")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dc6c6fb3d639756a532bcc47d4a9bf9f3965881b ]
While testing, I got an unexpected KASAN splat:
Jan 08 13:50:27 oracle-102.nfsv4.dev kernel: BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_svc_xprt_create_err+0x190/0x210 [sunrpc]
Jan 08 13:50:27 oracle-102.nfsv4.dev kernel: Read of size 28 at addr ffffc9000008f728 by task mount.nfs/4628
The memcpy() in the TP_fast_assign section of this trace point
copies the size of the destination buffer in order that the buffer
won't be overrun.
In other similar trace points, the source buffer for this memcpy is
a "struct sockaddr_storage" so the actual length of the source
buffer is always long enough to prevent the memcpy from reading
uninitialized or unallocated memory.
However, for this trace point, the source buffer can be as small as
a "struct sockaddr_in". For AF_INET sockaddrs, the memcpy() reads
memory that follows the source buffer, which is not always valid
memory.
To avoid copying past the end of the passed-in sockaddr, make the
source address's length available to the memcpy(). It would be a
little nicer if the tracing infrastructure was more friendly about
storing socket addresses that are not AF_INET, but I could not find
a way to make printk("%pIS") work with a dynamic array.
Reported-by: KASAN
Fixes: 4b8f380e46e4 ("SUNRPC: Tracepoint to record errors in svc_xpo_create()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 48f31169830f589e4c7ac475ccc7414951ded3f0 ]
In order to increase maximum wait-for-interrupt timeout, change it
to 64 bit variable. This wait is used only by newer ASICs, so no
problem in changing this interface at this time.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f81bdeaf816142e0729eea0cc84c395ec9673151 ]
ACPICA commit bc02c76d518135531483dfc276ed28b7ee632ce1
The current ACPI_ACCESS_*_WIDTH defines do not provide a way to
test that size is small enough to not cause an overflow when
applied to a 32-bit integer.
Rather than adding more magic numbers, add ACPI_ACCESS_*_SHIFT,
ACPI_ACCESS_*_MAX, and ACPI_ACCESS_*_DEFAULT #defines and
redefine ACPI_ACCESS_*_WIDTH in terms of the new #defines.
This was inititally reported on Linux where a size of 102 in
ACPI_ACCESS_BIT_WIDTH caused an overflow error in the SPCR
initialization code.
Link: https://github.com/acpica/acpica/commit/bc02c76d
Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4e484b3e969b52effd95c17f7a86f39208b2ccf4 ]
Kernel generates mapping change message, XFRM_MSG_MAPPING,
when a source port chage is detected on a input state with UDP
encapsulation set. Kernel generates a message for each IPsec packet
with new source port. For a high speed flow per packet mapping change
message can be excessive, and can overload the user space listener.
Introduce rate limiting for XFRM_MSG_MAPPING message to the user space.
The rate limiting is configurable via netlink, when adding a new SA or
updating it. Use the new attribute XFRMA_MTIMER_THRESH in seconds.
v1->v2 change:
update xfrm_sa_len()
v2->v3 changes:
use u32 insted unsigned long to reduce size of struct xfrm_state
fix xfrm_ompat size Reported-by: kernel test robot <lkp@intel.com>
accept XFRM_MSG_MAPPING only when XFRMA_ENCAP is present
Co-developed-by: Thomas Egerer <thomas.egerer@secunet.com>
Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d1579e61192e0e686faa4208500ef4c3b529b16c ]
Because refcount_dec_not_one() returns true if the target refcount
becomes saturated, it is generally unsafe to use its return value as
a loop termination condition, but that is what happens when a device
link's supplier device is released during runtime PM suspend
operations and on device link removal.
To address this, introduce pm_runtime_release_supplier() to be used
in the above cases which will check the supplier device's runtime
PM usage counter in addition to the refcount_dec_not_one() return
value, so the loop can be terminated in case the rpm_active refcount
value becomes invalid, and update the code in question to use it as
appropriate.
This change is not expected to have any visible functional impact.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fd8d135b2c5e88662f2729e034913f183455a667 ]
Add a HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirk that can be used
to invert the X/Y values.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[bentiss: silence checkpatch warning]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211208124045.61815-2-alistair@alistair23.me
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4ff22f487f8c26b99cbe1678344595734c001a39 ]
GEM helper libraries use struct drm_driver.gem_create_object to let
drivers override GEM object allocation. On failure, the call returns
NULL.
Change the semantics to make the calls return a pointer-encoded error.
This aligns the callback with its callers. Fixes the ingenic driver,
which already returns an error pointer.
Also update the callers to handle the involved types more strictly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211130095255.26710-1-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1a68b346a2c9969c05e80a3b99a9ab160b5655c0 ]
Currently, acpi_bus_get_status() calls acpi_device_always_present() to
allow platform quirks to override the _STA return to report that a
device is present (status = ACPI_STA_DEFAULT) independent of the _STA
return.
In some cases it might also be useful to have the opposite functionality
and have a platform quirk which marks a device as not present (status = 0)
to work around ACPI table bugs.
Change acpi_device_always_present() into a more generic
acpi_device_override_status() function to allow this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cb0e52b7748737b2cf6481fdd9b920ce7e1ebbdf ]
We've noticed cases where tasks in a cgroup are stalled on memory but
there is little memory FULL pressure since tasks stay on the runqueue
in reclaim.
A simple example involves a single threaded program that keeps leaking
and touching large amounts of memory. It runs in a cgroup with swap
enabled, memory.high set at 10M and cpu.max ratio set at 5%. Though
there is significant CPU pressure and memory SOME, there is barely any
memory FULL since the task enters reclaim and stays on the runqueue.
However, this memory-bound task is effectively stalled on memory and
we expect memory FULL to match memory SOME in this scenario.
The code is confused about memstall && running, thinking there is a
stalled task and a productive task when there's only one task: a
reclaimer that's counted as both. To fix this, we redefine the
condition for PSI_MEM_FULL to check that all running tasks are in an
active memstall instead of checking that there are no running tasks.
case PSI_MEM_FULL:
- return unlikely(tasks[NR_MEMSTALL] && !tasks[NR_RUNNING]);
+ return unlikely(tasks[NR_MEMSTALL] &&
+ tasks[NR_RUNNING] == tasks[NR_MEMSTALL_RUNNING]);
This will capture reclaimers. It will also capture tasks that called
psi_memstall_enter() and are about to sleep, but this should be
negligible noise.
Signed-off-by: Brian Chen <brianchen118@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20211110213312.310243-1-brianchen118@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ebf7f6f0a6cdcc17a3da52b81e4b3a98c4005028 ]
In the current code, the actual max tail call count is 33 which is greater
than MAX_TAIL_CALL_CNT (defined as 32). The actual limit is not consistent
with the meaning of MAX_TAIL_CALL_CNT and thus confusing at first glance.
We can see the historical evolution from commit 04fd61ab36ec ("bpf: allow
bpf programs to tail-call other bpf programs") and commit f9dabe016b63
("bpf: Undo off-by-one in interpreter tail call count limit"). In order
to avoid changing existing behavior, the actual limit is 33 now, this is
reasonable.
After commit 874be05f525e ("bpf, tests: Add tail call test suite"), we can
see there exists failed testcase.
On all archs when CONFIG_BPF_JIT_ALWAYS_ON is not set:
# echo 0 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf
# dmesg | grep -w FAIL
Tail call error path, max count reached jited:0 ret 34 != 33 FAIL
On some archs:
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf
# dmesg | grep -w FAIL
Tail call error path, max count reached jited:1 ret 34 != 33 FAIL
Although the above failed testcase has been fixed in commit 18935a72eb25
("bpf/tests: Fix error in tail call limit tests"), it would still be good
to change the value of MAX_TAIL_CALL_CNT from 32 to 33 to make the code
more readable.
The 32-bit x86 JIT was using a limit of 32, just fix the wrong comments and
limit to 33 tail calls as the constant MAX_TAIL_CALL_CNT updated. For the
mips64 JIT, use "ori" instead of "addiu" as suggested by Johan Almbladh.
For the riscv JIT, use RV_REG_TCC directly to save one register move as
suggested by Björn Töpel. For the other implementations, no function changes,
it does not change the current limit 33, the new value of MAX_TAIL_CALL_CNT
can reflect the actual max tail call count, the related tail call testcases
in test_bpf module and selftests can work well for the interpreter and the
JIT.
Here are the test results on x86_64:
# uname -m
x86_64
# echo 0 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf test_suite=test_tail_calls
# dmesg | tail -1
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [0/8 JIT'ed]
# rmmod test_bpf
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf test_suite=test_tail_calls
# dmesg | tail -1
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [8/8 JIT'ed]
# rmmod test_bpf
# ./test_progs -t tailcalls
#142 tailcalls:OK
Summary: 1/11 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/1636075800-3264-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 542cff7893a37445f98ece26aeb3c9c1055e9ea4 ]
Probelm:
Singlaning one sched fence from within another's sched
fence singal callback generates lockdep splat because
the both have same lockdep class of their fence->lock
Fix:
Fix bellow stack by rescheduling to irq work of
signaling and killing of jobs that left when entity is killed.
[11176.741181] dump_stack+0x10/0x12
[11176.741186] __lock_acquire.cold+0x208/0x2df
[11176.741197] lock_acquire+0xc6/0x2d0
[11176.741204] ? dma_fence_signal+0x28/0x80
[11176.741212] _raw_spin_lock_irqsave+0x4d/0x70
[11176.741219] ? dma_fence_signal+0x28/0x80
[11176.741225] dma_fence_signal+0x28/0x80
[11176.741230] drm_sched_fence_finished+0x12/0x20 [gpu_sched]
[11176.741240] drm_sched_entity_kill_jobs_cb+0x1c/0x50 [gpu_sched]
[11176.741248] dma_fence_signal_timestamp_locked+0xac/0x1a0
[11176.741254] dma_fence_signal+0x3b/0x80
[11176.741260] drm_sched_fence_finished+0x12/0x20 [gpu_sched]
[11176.741268] drm_sched_job_done.isra.0+0x7f/0x1a0 [gpu_sched]
[11176.741277] drm_sched_job_done_cb+0x12/0x20 [gpu_sched]
[11176.741284] dma_fence_signal_timestamp_locked+0xac/0x1a0
[11176.741290] dma_fence_signal+0x3b/0x80
[11176.741296] amdgpu_fence_process+0xd1/0x140 [amdgpu]
[11176.741504] sdma_v4_0_process_trap_irq+0x8c/0xb0 [amdgpu]
[11176.741731] amdgpu_irq_dispatch+0xce/0x250 [amdgpu]
[11176.741954] amdgpu_ih_process+0x81/0x100 [amdgpu]
[11176.742174] amdgpu_irq_handler+0x26/0xa0 [amdgpu]
[11176.742393] __handle_irq_event_percpu+0x4f/0x2c0
[11176.742402] handle_irq_event_percpu+0x33/0x80
[11176.742408] handle_irq_event+0x39/0x60
[11176.742414] handle_edge_irq+0x93/0x1d0
[11176.742419] __common_interrupt+0x50/0xe0
[11176.742426] common_interrupt+0x80/0x90
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: Christian König <christian.koenig@amd.com>
Tested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/dri-devel/msg321250.html
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
