| Age | Commit message (Collapse) | Author |
|---|
|
architectures
commit 6b15f678fb7d5ef54e089e6ace72f007fe6e9895 upstream.
For architectures using __WARN_TAINT, the WARN_ON macro did not print
out the "cut here" string. The other WARN_XXX macros would print "cut
here" inside __warn_printk, which is not called for WARN_ON since it
doesn't have a message to print.
Link: http://lkml.kernel.org/r/20190624154831.163888-1-ddavenport@chromium.org
Fixes: a7bed27af194 ("bug: fix "cut here" location for __WARN_TAINT architectures")
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9bd3bb6703d8c0a5fb8aec8e3287bd55b7341dcd upstream.
Architectures like powerpc use different address range to map ioremap
and vmalloc range. The memunmap() check used by the nvdimm layer was
wrongly using is_vmalloc_addr() to check for ioremap range which fails
for ppc64. This result in ppc64 not freeing the ioremap mapping. The
side effect of this is an unbind failure during module unload with
papr_scm nvdimm driver
Link: http://lkml.kernel.org/r/20190701134038.14165-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Fixes: b5beae5e224f ("powerpc/pseries: Add driver for PAPR SCM regions")
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 89705e92700170888236555fe91b45e4c1bb0985 upstream.
Userspace expects the IB_TM_CAP_RC bit to indicate that the device
supports RC transport tag matching with rendezvous offload. However the
firmware splits this into two capabilities for eager and rendezvous tag
matching.
Only if the FW supports both modes should userspace be told the tag
matching capability is available.
Cc: <stable@vger.kernel.org> # 4.13
Fixes: eb761894351d ("IB/mlx5: Fill XRQ capabilities")
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 113ab72ed4794c193509a97d7c6d32a6886e1682 upstream.
For large values of the number of zones reported and/or large zone
sizes, the sector increment calculated with
blk_queue_zone_sectors(q) * n
in blk_report_zones() loop can overflow the unsigned int type used for
the calculation as both "n" and blk_queue_zone_sectors() value are
unsigned int. E.g. for a device with 256 MB zones (524288 sectors),
overflow happens with 8192 or more zones reported.
Changing the return type of blk_queue_zone_sectors() to sector_t, fixes
this problem and avoids overflow problem for all other callers of this
helper too. The same change is also applied to the bdev_zone_sectors()
helper.
Fixes: e76239a3748c ("block: add a report_zones method")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e28ad544f462231d3fd081a7316339359efbb481 upstream.
DisplayID blocks allow embedding of CEA blocks. The payloads are
identical to traditional top level CEA extension blocks, but the header
is slightly different.
This change allows the CEA parser to find a CEA block inside a DisplayID
block. Additionally, it adds support for parsing the embedded CTA
header. No further changes are necessary due to payload parity.
This change fixes audio support for the Valve Index HMD.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.15
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619180901.17901-1-andresx7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bce5963bcb4f9934faa52be323994511d59fd13c upstream.
When binding an interdomain event channel to a vcpu via
IOCTL_EVTCHN_BIND_INTERDOMAIN not only the event channel needs to be
bound, but the affinity of the associated IRQi must be changed, too.
Otherwise the IRQ and the event channel won't be moved to another vcpu
in case the original vcpu they were bound to is going offline.
Cc: <stable@vger.kernel.org> # 4.13
Fixes: c48f64ab472389df ("xen-evtchn: Bind dyn evtchn:qemu-dm interrupt to next online VCPU")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 70f1b0d34bdf03065fe869e93cc17cad1ea20c4a upstream.
The usb support for asyncio encoded one of it's values in the wrong
field. It should have used si_value but instead used si_addr which is
not present in the _rt union member of struct siginfo.
The practical result of this is that on a 64bit big endian kernel
when delivering a signal to a 32bit process the si_addr field
is set to NULL, instead of the expected pointer value.
This issue can not be fixed in copy_siginfo_to_user32 as the usb
usage of the the _sigfault (aka si_addr) member of the siginfo
union when SI_ASYNCIO is set is incompatible with the POSIX and
glibc usage of the _rt member of the siginfo union.
Therefore replace kill_pid_info_as_cred with kill_pid_usb_asyncio a
dedicated function for this one specific case. There are no other
users of kill_pid_info_as_cred so this specialization should have no
impact on the amount of code in the kernel. Have kill_pid_usb_asyncio
take instead of a siginfo_t which is difficult and error prone, 3
arguments, a signal number, an errno value, and an address enconded as
a sigval_t. The encoding of the address as a sigval_t allows the
code that reads the userspace request for a signal to handle this
compat issue along with all of the other compat issues.
Add BUILD_BUG_ONs in kernel/signal.c to ensure that we can now place
the pointer value at the in si_pid (instead of si_addr). That is the
code now verifies that si_pid and si_addr always occur at the same
location. Further the code veries that for native structures a value
placed in si_pid and spilling into si_uid will appear in userspace in
si_addr (on a byte by byte copy of siginfo or a field by field copy of
siginfo). The code also verifies that for a 64bit kernel and a 32bit
userspace the 32bit pointer will fit in si_pid.
I have used the usbsig.c program below written by Alan Stern and
slightly tweaked by me to run on a big endian machine to verify the
issue exists (on sparc64) and to confirm the patch below fixes the issue.
/* usbsig.c -- test USB async signal delivery */
#define _GNU_SOURCE
#include <stdio.h>
#include <fcntl.h>
#include <signal.h>
#include <string.h>
#include <sys/ioctl.h>
#include <unistd.h>
#include <endian.h>
#include <linux/usb/ch9.h>
#include <linux/usbdevice_fs.h>
static struct usbdevfs_urb urb;
static struct usbdevfs_disconnectsignal ds;
static volatile sig_atomic_t done = 0;
void urb_handler(int sig, siginfo_t *info , void *ucontext)
{
printf("Got signal %d, signo %d errno %d code %d addr: %p urb: %p\n",
sig, info->si_signo, info->si_errno, info->si_code,
info->si_addr, &urb);
printf("%s\n", (info->si_addr == &urb) ? "Good" : "Bad");
}
void ds_handler(int sig, siginfo_t *info , void *ucontext)
{
printf("Got signal %d, signo %d errno %d code %d addr: %p ds: %p\n",
sig, info->si_signo, info->si_errno, info->si_code,
info->si_addr, &ds);
printf("%s\n", (info->si_addr == &ds) ? "Good" : "Bad");
done = 1;
}
int main(int argc, char **argv)
{
char *devfilename;
int fd;
int rc;
struct sigaction act;
struct usb_ctrlrequest *req;
void *ptr;
char buf[80];
if (argc != 2) {
fprintf(stderr, "Usage: usbsig device-file-name\n");
return 1;
}
devfilename = argv[1];
fd = open(devfilename, O_RDWR);
if (fd == -1) {
perror("Error opening device file");
return 1;
}
act.sa_sigaction = urb_handler;
sigemptyset(&act.sa_mask);
act.sa_flags = SA_SIGINFO;
rc = sigaction(SIGUSR1, &act, NULL);
if (rc == -1) {
perror("Error in sigaction");
return 1;
}
act.sa_sigaction = ds_handler;
sigemptyset(&act.sa_mask);
act.sa_flags = SA_SIGINFO;
rc = sigaction(SIGUSR2, &act, NULL);
if (rc == -1) {
perror("Error in sigaction");
return 1;
}
memset(&urb, 0, sizeof(urb));
urb.type = USBDEVFS_URB_TYPE_CONTROL;
urb.endpoint = USB_DIR_IN | 0;
urb.buffer = buf;
urb.buffer_length = sizeof(buf);
urb.signr = SIGUSR1;
req = (struct usb_ctrlrequest *) buf;
req->bRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE;
req->bRequest = USB_REQ_GET_DESCRIPTOR;
req->wValue = htole16(USB_DT_DEVICE << 8);
req->wIndex = htole16(0);
req->wLength = htole16(sizeof(buf) - sizeof(*req));
rc = ioctl(fd, USBDEVFS_SUBMITURB, &urb);
if (rc == -1) {
perror("Error in SUBMITURB ioctl");
return 1;
}
rc = ioctl(fd, USBDEVFS_REAPURB, &ptr);
if (rc == -1) {
perror("Error in REAPURB ioctl");
return 1;
}
memset(&ds, 0, sizeof(ds));
ds.signr = SIGUSR2;
ds.context = &ds;
rc = ioctl(fd, USBDEVFS_DISCSIGNAL, &ds);
if (rc == -1) {
perror("Error in DISCSIGNAL ioctl");
return 1;
}
printf("Waiting for usb disconnect\n");
while (!done) {
sleep(1);
}
close(fd);
return 0;
}
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oneukum@suse.com>
Fixes: v2.3.39
Cc: stable@vger.kernel.org
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4914da2fb0c89205790503f20dfdde854f3afdd8 upstream.
We apply the codec resume forcibly at system resume callback for
updating and syncing the jack detection state that may have changed
during sleeping. This is, however, superfluous for the codec like
Intel HDMI/DP, where the jack detection is managed via the audio
component notification; i.e. the jack state change shall be reported
sooner or later from the graphics side at mode change.
This patch changes the codec resume callback to avoid the forcible
resume conditionally with a new flag, codec->relaxed_resume, for
reducing the resume time. The flag is set in the codec probe.
Although this doesn't fix the entire bug mentioned in the bugzilla
entry below, it's still a good optimization and some improvements are
seen.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201901
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bf0bdd1343efbbf65b4d53aef1fce14acbd79d50 ]
Unlike driver mode, generic xdp receive could be triggered
by different threads on different CPU cores at the same time
leading to the fill and rx queue breakage. For example, this
could happen while sending packets from two processes to the
first interface of veth pair while the second part of it is
open with AF_XDP socket.
Need to take a lock for each generic receive to avoid race.
Fixes: c497176cb2e4 ("xsk: add Rx receive functions and poll support")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: William Tu <u9012063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 99f0eae653b2db64917d0b58099eb51e300b311d ]
If the rxrpc_eproto tracepoint is enabled, an oops will be cause by the
trace line that rxrpc_extract_header() tries to emit when a protocol error
occurs (typically because the packet is short) because the call argument is
NULL.
Fix this by using ?: to assume 0 as the debug_id if call is NULL.
This can then be induced by:
echo -e '\0\0\0\0\0\0\0\0' | ncat -4u --send-only <addr> 20001
where addr has the following program running on it:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/socket.h>
#include <arpa/inet.h>
#include <linux/rxrpc.h>
int main(void)
{
struct sockaddr_rxrpc srx;
int fd;
memset(&srx, 0, sizeof(srx));
srx.srx_family = AF_RXRPC;
srx.srx_service = 0;
srx.transport_type = AF_INET;
srx.transport_len = sizeof(srx.transport.sin);
srx.transport.sin.sin_family = AF_INET;
srx.transport.sin.sin_port = htons(0x4e21);
fd = socket(AF_RXRPC, SOCK_DGRAM, AF_INET6);
bind(fd, (struct sockaddr *)&srx, sizeof(srx));
sleep(20);
return 0;
}
It results in the following oops.
BUG: kernel NULL pointer dereference, address: 0000000000000340
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
...
RIP: 0010:trace_event_raw_event_rxrpc_rx_eproto+0x47/0xac
...
Call Trace:
<IRQ>
rxrpc_extract_header+0x86/0x171
? rcu_read_lock_sched_held+0x5d/0x63
? rxrpc_new_skb+0xd4/0x109
rxrpc_input_packet+0xef/0x14fc
? rxrpc_input_data+0x986/0x986
udp_queue_rcv_one_skb+0xbf/0x3d0
udp_unicast_rcv_skb.isra.8+0x64/0x71
ip_protocol_deliver_rcu+0xe4/0x1b4
ip_local_deliver+0xf0/0x154
__netif_receive_skb_one_core+0x50/0x6c
netif_receive_skb_internal+0x26b/0x2e9
napi_gro_receive+0xf8/0x1da
rtl8169_poll+0x303/0x4c4
net_rx_action+0x10e/0x333
__do_softirq+0x1a5/0x38f
irq_exit+0x54/0xc4
do_IRQ+0xda/0xf8
common_interrupt+0xf/0xf
</IRQ>
...
? cpuidle_enter_state+0x23c/0x34d
cpuidle_enter+0x2a/0x36
do_idle+0x163/0x1ea
cpu_startup_entry+0x1d/0x1f
start_secondary+0x157/0x172
secondary_startup_64+0xa4/0xb0
Fixes: a25e21f0bcd2 ("rxrpc, afs: Use debug_ids rather than pointers in traces")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0472301a28f6cf53a6bc5783e48a2d0bbff4682f ]
Merge commit 1c8c5a9d38f60 ("Merge
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next") undid the
fix from commit 36f9814a494 ("bpf: fix uapi hole for 32 bit compat
applications") by taking the gpl_compatible 1-bit field definition from
commit b85fab0e67b162 ("bpf: Add gpl_compatible flag to struct
bpf_prog_info") as is. That breaks architectures with 16-bit alignment
like m68k. Add 31-bit pad after gpl_compatible to restore alignment of
following fields.
Thanks to Dmitry V. Levin his analysis of this bug history.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6282edb72bed5324352522d732080d4c1b9dfed6 ]
Exynos SoCs based on CA7/CA15 have 2 timer interfaces: custom Exynos MCT
(Multi Core Timer) and standard ARM Architected Timers.
There are use cases, where both timer interfaces are used simultanously.
One of such examples is using Exynos MCT for the main system timer and
ARM Architected Timers for the KVM and virtualized guests (KVM requires
arch timers).
Exynos Multi-Core Timer driver (exynos_mct) must be however started
before ARM Architected Timers (arch_timer), because they both share some
common hardware blocks (global system counter) and turning on MCT is
needed to get ARM Architected Timer working properly.
To ensure selecting Exynos MCT as the main system timer, increase MCT
timer rating. To ensure proper starting order of both timers during
suspend/resume cycle, increase MCT hotplug priority over ARM Archictected
Timers.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5db7c8b9f9fc2aeec671ae3ca6375752c162e0e7 ]
syzkaller reports for memory leak in start_sync_thread [1]
As Eric points out, kthread may start and stop before the
threadfn function is called, so there is no chance the
data (tinfo in our case) to be released in thread.
Fix this by releasing tinfo in the controlling code instead.
[1]
BUG: memory leak
unreferenced object 0xffff8881206bf700 (size 32):
comm "syz-executor761", pid 7268, jiffies 4294943441 (age 20.470s)
hex dump (first 32 bytes):
00 40 7c 09 81 88 ff ff 80 45 b8 21 81 88 ff ff .@|......E.!....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000057619e23>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
[<0000000057619e23>] slab_post_alloc_hook mm/slab.h:439 [inline]
[<0000000057619e23>] slab_alloc mm/slab.c:3326 [inline]
[<0000000057619e23>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
[<0000000086ce5479>] kmalloc include/linux/slab.h:547 [inline]
[<0000000086ce5479>] start_sync_thread+0x5d2/0xe10 net/netfilter/ipvs/ip_vs_sync.c:1862
[<000000001a9229cc>] do_ip_vs_set_ctl+0x4c5/0x780 net/netfilter/ipvs/ip_vs_ctl.c:2402
[<00000000ece457c8>] nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
[<00000000ece457c8>] nf_setsockopt+0x4c/0x80 net/netfilter/nf_sockopt.c:115
[<00000000942f62d4>] ip_setsockopt net/ipv4/ip_sockglue.c:1258 [inline]
[<00000000942f62d4>] ip_setsockopt+0x9b/0xb0 net/ipv4/ip_sockglue.c:1238
[<00000000a56a8ffd>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616
[<00000000fa895401>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3130
[<0000000095eef4cf>] __sys_setsockopt+0x98/0x120 net/socket.c:2078
[<000000009747cf88>] __do_sys_setsockopt net/socket.c:2089 [inline]
[<000000009747cf88>] __se_sys_setsockopt net/socket.c:2086 [inline]
[<000000009747cf88>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086
[<00000000ded8ba80>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
[<00000000893b4ac8>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: syzbot+7e2e50c8adfccd2e5041@syzkaller.appspotmail.com
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 998e7a76804b ("ipvs: Use kthread_run() instead of doing a double-fork via kernel_thread()")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6da9f775175e516fc7229ceaa9b54f8f56aa7924 ]
When debugging options are turned on, the rcu_read_lock() function
might not be inlined. This results in lockdep's print_lock() function
printing "rcu_read_lock+0x0/0x70" instead of rcu_read_lock()'s caller.
For example:
[ 10.579995] =============================
[ 10.584033] WARNING: suspicious RCU usage
[ 10.588074] 4.18.0.memcg_v2+ #1 Not tainted
[ 10.593162] -----------------------------
[ 10.597203] include/linux/rcupdate.h:281 Illegal context switch in
RCU read-side critical section!
[ 10.606220]
[ 10.606220] other info that might help us debug this:
[ 10.606220]
[ 10.614280]
[ 10.614280] rcu_scheduler_active = 2, debug_locks = 1
[ 10.620853] 3 locks held by systemd/1:
[ 10.624632] #0: (____ptrval____) (&type->i_mutex_dir_key#5){.+.+}, at: lookup_slow+0x42/0x70
[ 10.633232] #1: (____ptrval____) (rcu_read_lock){....}, at: rcu_read_lock+0x0/0x70
[ 10.640954] #2: (____ptrval____) (rcu_read_lock){....}, at: rcu_read_lock+0x0/0x70
These "rcu_read_lock+0x0/0x70" strings are not providing any useful
information. This commit therefore forces inlining of the rcu_read_lock()
function so that rcu_read_lock()'s caller is instead shown.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 83b44fe343b5abfcb1b2261289bd0cfcfcfd60a8 upstream.
The cacheinfo structures are alloced/freed by cpu online/offline
callbacks. Originally these were only used by sysfs to expose the
cache topology to user space. Without any in-kernel dependencies
CPUHP_AP_ONLINE_DYN was an appropriate choice.
resctrl has started using these structures to identify CPUs that
share a cache. It updates its 'domain' structures from cpu
online/offline callbacks. These depend on the cacheinfo structures
(resctrl_online_cpu()->domain_add_cpu()->get_cache_id()->
get_cpu_cacheinfo()).
These also run as CPUHP_AP_ONLINE_DYN.
Now that there is an in-kernel dependency, move the cacheinfo
work earlier so we know its done before resctrl's CPUHP_AP_ONLINE_DYN
work runs.
Fixes: 2264d9c74dda1 ("x86/intel_rdt: Build structures for each resource based on cache topology")
Cc: <stable@vger.kernel.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20190624173656.202407-1-james.morse@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c32cc30c0544f13982ee0185d55f4910319b1a79 upstream.
cpu_to_le32/le32_to_cpu is defined in include/linux/byteorder/generic.h,
which is not exported to user-space.
UAPI headers must use the ones prefixed with double-underscore.
Detected by compile-testing exported headers:
include/linux/nilfs2_ondisk.h: In function `nilfs_checkpoint_set_snapshot':
include/linux/nilfs2_ondisk.h:536:17: error: implicit declaration of function `cpu_to_le32' [-Werror=implicit-function-declaration]
cp->cp_flags = cpu_to_le32(le32_to_cpu(cp->cp_flags) | \
^
include/linux/nilfs2_ondisk.h:552:1: note: in expansion of macro `NILFS_CHECKPOINT_FNS'
NILFS_CHECKPOINT_FNS(SNAPSHOT, snapshot)
^~~~~~~~~~~~~~~~~~~~
include/linux/nilfs2_ondisk.h:536:29: error: implicit declaration of function `le32_to_cpu' [-Werror=implicit-function-declaration]
cp->cp_flags = cpu_to_le32(le32_to_cpu(cp->cp_flags) | \
^
include/linux/nilfs2_ondisk.h:552:1: note: in expansion of macro `NILFS_CHECKPOINT_FNS'
NILFS_CHECKPOINT_FNS(SNAPSHOT, snapshot)
^~~~~~~~~~~~~~~~~~~~
include/linux/nilfs2_ondisk.h: In function `nilfs_segment_usage_set_clean':
include/linux/nilfs2_ondisk.h:622:19: error: implicit declaration of function `cpu_to_le64' [-Werror=implicit-function-declaration]
su->su_lastmod = cpu_to_le64(0);
^~~~~~~~~~~
Link: http://lkml.kernel.org/r/20190605053006.14332-1-yamada.masahiro@socionext.com
Fixes: e63e88bc53ba ("nilfs2: move ioctl interface and disk layout to uapi separately")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1c2eb5b2853c9f513690ba6b71072d8eb65da16a upstream.
The VMCI handle array has an integer overflow in
vmci_handle_arr_append_entry when it tries to expand the array. This can be
triggered from a guest, since the doorbell link hypercall doesn't impose a
limit on the number of doorbell handles that a VM can create in the
hypervisor, and these handles are stored in a handle array.
In this change, we introduce a mandatory max capacity for handle
arrays/lists to avoid excessive memory usage.
Signed-off-by: Vishnu Dasa <vdasa@vmware.com>
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 79d08f89bb1b5c2c1ff90d9bb95497ab9e8aa7e0 upstream.
'bio->bi_iter.bi_size' is 'unsigned int', which at most hold 4G - 1
bytes.
Before 07173c3ec276 ("block: enable multipage bvecs"), one bio can
include very limited pages, and usually at most 256, so the fs bio
size won't be bigger than 1M bytes most of times.
Since we support multi-page bvec, in theory one fs bio really can
be added > 1M pages, especially in case of hugepage, or big writeback
with too many dirty pages. Then there is chance in which .bi_size
is overflowed.
Fixes this issue by using bio_full() to check if the added segment may
overflow .bi_size.
Cc: Liu Yiding <liuyd.fnst@cn.fujitsu.com>
Cc: kernel test robot <rong.a.chen@intel.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: linux-xfs@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 07173c3ec276 ("block: enable multipage bvecs")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ca95c7bf3d29716916baccdc77c3c2284b703069 upstream.
Extension Unit (XU) is used to have a compatible layout with
Processing Unit (PU) on UAC1, and the usb-audio driver code assumed it
for parsing the descriptors. Meanwhile, on UAC2, XU became slightly
incompatible with PU; namely, XU has a one-byte bmControls bitmap
while PU has two bytes bmControls bitmap. This incompatibility
results in the read of a wrong address for the last iExtension field,
which ended up with an incorrect string for the mixer element name, as
recently reported for Focusrite Scarlett 18i20 device.
This patch corrects this misalignment by introducing a couple of new
macros and calling them depending on the descriptor type.
Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0")
Reported-by: Stefan Sauer <ensonic@hora-obscura.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 5fd4ca2d84b249f0858ce28cf637cf25b61a398f.
Mikhail Gavrilov reports that it causes the VM_BUG_ON_PAGE() in
__delete_from_swap_cache() to trigger:
page:ffffd6d34dff0000 refcount:1 mapcount:1 mapping:ffff97812323a689 index:0xfecec363
anon
flags: 0x17fffe00080034(uptodate|lru|active|swapbacked)
raw: 0017fffe00080034 ffffd6d34c67c508 ffffd6d3504b8d48 ffff97812323a689
raw: 00000000fecec363 0000000000000000 0000000100000000 ffff978433ace000
page dumped because: VM_BUG_ON_PAGE(entry != page)
page->mem_cgroup:ffff978433ace000
------------[ cut here ]------------
kernel BUG at mm/swap_state.c:170!
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 PID: 221 Comm: kswapd0 Not tainted 5.2.0-0.rc2.git0.1.fc31.x86_64 #1
Hardware name: System manufacturer System Product Name/ROG STRIX X470-I GAMING, BIOS 2202 04/11/2019
RIP: 0010:__delete_from_swap_cache+0x20d/0x240
Code: 30 65 48 33 04 25 28 00 00 00 75 4a 48 83 c4 38 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 c7 c6 2f dc 0f 8a 48 89 c7 e8 93 1b fd ff <0f> 0b 48 c7 c6 a8 74 0f 8a e8 85 1b fd ff 0f 0b 48 c7 c6 a8 7d 0f
RSP: 0018:ffffa982036e7980 EFLAGS: 00010046
RAX: 0000000000000021 RBX: 0000000000000040 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000086 RDI: ffff97843d657900
RBP: 0000000000000001 R08: ffffa982036e7835 R09: 0000000000000535
R10: ffff97845e21a46c R11: ffffa982036e7835 R12: ffff978426387120
R13: 0000000000000000 R14: ffffd6d34dff0040 R15: ffffd6d34dff0000
FS: 0000000000000000(0000) GS:ffff97843d640000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00002cba88ef5000 CR3: 000000078a97c000 CR4: 00000000003406e0
Call Trace:
delete_from_swap_cache+0x46/0xa0
try_to_free_swap+0xbc/0x110
swap_writepage+0x13/0x70
pageout.isra.0+0x13c/0x350
shrink_page_list+0xc14/0xdf0
shrink_inactive_list+0x1e5/0x3c0
shrink_node_memcg+0x202/0x760
shrink_node+0xe0/0x470
balance_pgdat+0x2d1/0x510
kswapd+0x220/0x420
kthread+0xfb/0x130
ret_from_fork+0x22/0x40
and it's not immediately obvious why it happens. It's too late in the
rc cycle to do anything but revert for now.
Link: https://lore.kernel.org/lkml/CABXGCsN9mYmBD-4GaaeW_NrDu+FDXLzr_6x+XNxfmFV6QkYCDg@mail.gmail.com/
Reported-and-bisected-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Suggested-by: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
devm_ioremap_resource() does not currently take 'const' arguments, which
results in a warning from the first driver trying to do it anyway:
drivers/gpio/gpio-amd-fch.c: In function 'amd_fch_gpio_probe':
drivers/gpio/gpio-amd-fch.c:171:49: error: passing argument 2 of 'devm_ioremap_resource' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
priv->base = devm_ioremap_resource(&pdev->dev, &amd_fch_gpio_iores);
^~~~~~~~~~~~~~~~~~~
Change the prototype to allow it, as there is no real reason not to.
Link: http://lkml.kernel.org/r/20190628150049.1108048-1-arnd@arndb.de
Fixes: 9bb2e0452508 ("gpio: amd: Make resource struct const")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Various fixes, most of them related to bugs perf fuzzing found in the
x86 code"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/regs: Use PERF_REG_EXTENDED_MASK
perf/x86: Remove pmu->pebs_no_xmm_regs
perf/x86: Clean up PEBS_XMM_REGS
perf/x86/regs: Check reserved bits
perf/x86: Disable extended registers for non-supported PMUs
perf/ioctl: Add check for the sample_period value
perf/core: Fix perf_sample_regs_user() mm check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Avoid skipping bus-level PCI power management during system resume for
PCIe ports left in D0 during the preceding suspend transition on
platforms where the power states of those ports can change out of the
PCI layer's control"
* tag 'pm-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PCI: PM: Avoid skipping bus-level PM on platforms without ACPI
|
|
Pull XArray fixes from Matthew Wilcox:
- Account XArray nodes for the page cache to the appropriate cgroup
(Johannes Weiner)
- Fix idr_get_next() when called under the RCU lock (Matthew Wilcox)
- Add a test for xa_insert() (Matthew Wilcox)
* tag 'xarray-5.2-rc6' of git://git.infradead.org/users/willy/linux-dax:
XArray tests: Add check_insert
idr: Fix idr_get_next race with idr_remove
mm: fix page cache convergence regression
|
|
Merge misc fixes from Andrew Morton:
"15 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
linux/kernel.h: fix overflow for DIV_ROUND_UP_ULL
mm, swap: fix THP swap out
fork,memcg: alloc_thread_stack_node needs to set tsk->stack
MAINTAINERS: add CLANG/LLVM BUILD SUPPORT info
mm/vmalloc.c: avoid bogus -Wmaybe-uninitialized warning
mm/page_idle.c: fix oops because end_pfn is larger than max_pfn
initramfs: fix populate_initrd_image() section mismatch
mm/oom_kill.c: fix uninitialized oc->constraint
mm: hugetlb: soft-offline: dissolve_free_huge_page() return zero on !PageHuge
mm: soft-offline: return -EBUSY if set_hwpoison_free_buddy_page() fails
signal: remove the wrong signal_pending() check in restore_user_sigmask()
fs/binfmt_flat.c: make load_flat_shared_library() work
mm/mempolicy.c: fix an incorrect rebind node in mpol_rebind_nodemask
fs/proc/array.c: allow reporting eip/esp for all coredumping threads
mm/dev_pfn: exclude MEMORY_DEVICE_PRIVATE while computing virtual address
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Minor RISC-V fixes and one defconfig update.
The fixes have no functional impact:
- Fix some comment text in the memory management vmalloc_fault path.
- Fix some warnings from the DT compiler in our newly-added DT files.
- Change the newly-added DT bindings such that SoC IP blocks with
external I/O are marked as "disabled" by default, then enable them
explicitly in board DT files when the devices are used on the
board. This aligns the bindings with existing upstream practice.
- Add the MIT license as an option for a minor header file, at the
request of one of the U-Boot maintainers.
The RISC-V defconfig update builds the SiFive SPI driver and the
MMC-SPI driver by default. The intention here is to make v5.2 more
usable for testers and users with RISC-V hardware"
* tag 'riscv-for-v5.2/fixes-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: mm: Fix code comment
dt-bindings: clock: sifive: add MIT license as an option for the header file
dt-bindings: riscv: resolve 'make dt_binding_check' warnings
riscv: dts: Re-organize the DT nodes
RISC-V: defconfig: enable MMC & SPI for RISC-V
|
|
DIV_ROUND_UP_ULL adds the two arguments and then invokes
DIV_ROUND_DOWN_ULL. But on a 32bit system the addition of two 32 bit
values can overflow. DIV_ROUND_DOWN_ULL does it correctly and stashes
the addition into a unsigned long long so cast the result to unsigned
long long here to avoid the overflow condition.
[akpm@linux-foundation.org: DIV_ROUND_UP_ULL must be an rval]
Link: http://lkml.kernel.org/r/20190625100518.30753-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the minimal fix for stable, I'll send cleanups later.
Commit 854a6ed56839 ("signal: Add restore_user_sigmask()") introduced
the visible change which breaks user-space: a signal temporary unblocked
by set_user_sigmask() can be delivered even if the caller returns
success or timeout.
Change restore_user_sigmask() to accept the additional "interrupted"
argument which should be used instead of signal_pending() check, and
update the callers.
Eric said:
: For clarity. I don't think this is required by posix, or fundamentally to
: remove the races in select. It is what linux has always done and we have
: applications who care so I agree this fix is needed.
:
: Further in any case where the semantic change that this patch rolls back
: (aka where allowing a signal to be delivered and the select like call to
: complete) would be advantage we can do as well if not better by using
: signalfd.
:
: Michael is there any chance we can get this guarantee of the linux
: implementation of pselect and friends clearly documented. The guarantee
: that if the system call completes successfully we are guaranteed that no
: signal that is unblocked by using sigmask will be delivered?
Link: http://lkml.kernel.org/r/20190604134117.GA29963@redhat.com
Fixes: 854a6ed56839a40f6b5d02a2962f48841482eec4 ("signal: Add restore_user_sigmask()")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Eric Wong <e@80x24.org>
Tested-by: Eric Wong <e@80x24.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: <stable@vger.kernel.org> [5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The presence of struct page does not guarantee linear mapping for the pfn
physical range. Device private memory which is non-coherent is excluded
from linear mapping during devm_memremap_pages() though they will still
have struct page coverage.
Change pfn_t_to_virt() to just check for device private memory before
giving out virtual address for a given pfn.
pfn_t_to_virt() actually has no callers. Let's fix it for the 5.2 kernel
and remove it in 5.3.
Link: http://lkml.kernel.org/r/1558089514-25067-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of clk driver fixes and one core framework fix
- Do a DT/firmware lookup in clk_core_get() even when the DT index is
a nonsensical value
- Fix some clk data typos in the Amlogic DT headers/code
- Avoid returning junk in the TI clk driver when an invalid clk is
looked for
- Fix dividers for the emac clks on Stratix10 SoCs
- Fix default HDA rates on Tegra210 to correct distorted audio"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: socfpga: stratix10: fix divider entry for the emac clocks
clk: Do a DT parent lookup even when index < 0
clk: tegra210: Fix default rates for HDA clocks
clk: ti: clkctrl: Fix returning uninitialized data
clk: meson: meson8b: fix a typo in the VPU parent names array variable
clk: meson: fix MPLL 50M binding id typo
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for one corner case in HID++ protocol with respect to handling
very long reports, from Hans de Goede
- power management fix in Intel-ISH driver, from Hyungwoo Yang
- use-after-free fix in Intel-ISH driver, from Dan Carpenter
- a couple of new device IDs/quirks from Kai-Heng Feng, Kyle Godbey and
Oleksandr Natalenko
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: intel-ish-hid: fix wrong driver_data usage
HID: multitouch: Add pointstick support for ALPS Touchpad
HID: logitech-dj: Fix forwarding of very long HID++ reports
HID: uclogic: Add support for Huion HS64 tablet
HID: chicony: add another quirk for PixArt mouse
HID: intel-ish-hid: Fix a use after free in load_fw_from_host()
|
|
Pull networking fixes from David Miller:
1) Fix ppp_mppe crypto soft dependencies, from Takashi Iawi.
2) Fix TX completion to be finite, from Sergej Benilov.
3) Use register_pernet_device to avoid a dst leak in tipc, from Xin
Long.
4) Double free of TX cleanup in Dirk van der Merwe.
5) Memory leak in packet_set_ring(), from Eric Dumazet.
6) Out of bounds read in qmi_wwan, from Bjørn Mork.
7) Fix iif used in mcast/bcast looped back packets, from Stephen
Suryaputra.
8) Fix neighbour resolution on raw ipv6 sockets, from Nicolas Dichtel.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (25 commits)
af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET
sctp: change to hold sk after auth shkey is created successfully
ipv6: fix neighbour resolution with raw socket
ipv6: constify rt6_nexthop()
net: dsa: microchip: Use gpiod_set_value_cansleep()
net: aquantia: fix vlans not working over bridged network
ipv4: reset rt_iif for recirculated mcast/bcast out pkts
team: Always enable vlan tx offload
net/smc: Fix error path in smc_init
net/smc: hold conns_lock before calling smc_lgr_register_conn()
bonding: Always enable vlan tx offload
net/ipv6: Fix misuse of proc_dointvec "skip_notify_on_dev_down"
ipv4: Use return value of inet_iif() for __raw_v4_lookup in the while loop
qmi_wwan: Fix out-of-bounds read
tipc: check msg->req data len in tipc_nl_compat_bearer_disable
net: macb: do not copy the mac address if NULL
net/packet: fix memory leak in packet_set_ring()
net/tls: fix page double free on TX cleanup
net/sched: cbs: Fix error path of cbs_module_init
tipc: change to use register_pernet_device
...
|
|
At Bin Meng's request, add the MIT license as an option for the SiFive
FU540 PRCI header file.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
|
|
There are platforms that do not call pm_set_suspend_via_firmware(),
so pm_suspend_via_firmware() returns 'false' on them, but the power
states of PCI devices (PCIe ports in particular) are changed as a
result of powering down core platform components during system-wide
suspend. Thus the pm_suspend_via_firmware() checks in
pci_pm_suspend_noirq() and pci_pm_resume_noirq() introduced by
commit 3e26c5feed2a ("PCI: PM: Skip devices in D0 for suspend-to-
idle") are not sufficient to determine that devices left in D0
during suspend will remain in D0 during resume and so the bus-level
power management can be skipped for them.
For this reason, introduce a new global suspend flag,
PM_SUSPEND_FLAG_NO_PLATFORM, set it for suspend-to-idle only
and replace the pm_suspend_via_firmware() checks mentioned above
with checks against this flag.
Fixes: 3e26c5feed2a ("PCI: PM: Skip devices in D0 for suspend-to-idle")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
There is no functional change in this patch, it only prepares the next one.
rt6_nexthop() will be used by ip6_dst_lookup_neigh(), which uses const
variables.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Multicast or broadcast egress packets have rt_iif set to the oif. These
packets might be recirculated back as input and lookup to the raw
sockets may fail because they are bound to the incoming interface
(skb_iif). If rt_iif is not zero, during the lookup, inet_iif() function
returns rt_iif instead of skb_iif. Hence, the lookup fails.
v2: Make it non vrf specific (David Ahern). Reword the changelog to
reflect it.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, in suspend() and resume(), ishtp client drivers are using
driver_data to get "struct ishtp_cl_device" object which is set by
bus driver. It's wrong since the driver_data should not be owned bus.
driver_data should be owned by the corresponding ishtp client driver.
Due to this, some ishtp client driver like cros_ec_ishtp which uses
its driver_data to transfer its data to its child doesn't work correctly.
So this patch removes setting driver_data in bus drier and instead of
using driver_data to get "struct ishtp_cl_device", since "struct device"
is embedded in "struct ishtp_cl_device", we introduce a helper function
that returns "struct ishtp_cl_device" from "struct device".
Signed-off-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The perf fuzzer caused Skylake machine to crash:
[ 9680.085831] Call Trace:
[ 9680.088301] <IRQ>
[ 9680.090363] perf_output_sample_regs+0x43/0xa0
[ 9680.094928] perf_output_sample+0x3aa/0x7a0
[ 9680.099181] perf_event_output_forward+0x53/0x80
[ 9680.103917] __perf_event_overflow+0x52/0xf0
[ 9680.108266] ? perf_trace_run_bpf_submit+0xc0/0xc0
[ 9680.113108] perf_swevent_hrtimer+0xe2/0x150
[ 9680.117475] ? check_preempt_wakeup+0x181/0x230
[ 9680.122091] ? check_preempt_curr+0x62/0x90
[ 9680.126361] ? ttwu_do_wakeup+0x19/0x140
[ 9680.130355] ? try_to_wake_up+0x54/0x460
[ 9680.134366] ? reweight_entity+0x15b/0x1a0
[ 9680.138559] ? __queue_work+0x103/0x3f0
[ 9680.142472] ? update_dl_rq_load_avg+0x1cd/0x270
[ 9680.147194] ? timerqueue_del+0x1e/0x40
[ 9680.151092] ? __remove_hrtimer+0x35/0x70
[ 9680.155191] __hrtimer_run_queues+0x100/0x280
[ 9680.159658] hrtimer_interrupt+0x100/0x220
[ 9680.163835] smp_apic_timer_interrupt+0x6a/0x140
[ 9680.168555] apic_timer_interrupt+0xf/0x20
[ 9680.172756] </IRQ>
The XMM registers can only be collected by PEBS hardware events on the
platforms with PEBS baseline support, e.g. Icelake, not software/probe
events.
Add capabilities flag PERF_PMU_CAP_EXTENDED_REGS to indicate the PMU
which support extended registers. For X86, the extended registers are
XMM registers.
Add has_extended_regs() to check if extended registers are applied.
The generic code define the mask of extended registers as 0 if arch
headers haven't overridden it.
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 878068ea270e ("perf/x86: Support outputting XMM registers")
Link: https://lkml.kernel.org/r/1559081314-9714-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
With commit 94850257cf0f ("tls: Fix tls_device handling of partial records")
a new path was introduced to cleanup partial records during sk_proto_close.
This path does not handle the SW KTLS tx_list cleanup.
This is unnecessary though since the free_resources calls for both
SW and offload paths will cleanup a partial record.
The visible effect is the following warning, but this bug also causes
a page double free.
WARNING: CPU: 7 PID: 4000 at net/core/stream.c:206 sk_stream_kill_queues+0x103/0x110
RIP: 0010:sk_stream_kill_queues+0x103/0x110
RSP: 0018:ffffb6df87e07bd0 EFLAGS: 00010206
RAX: 0000000000000000 RBX: ffff8c21db4971c0 RCX: 0000000000000007
RDX: ffffffffffffffa0 RSI: 000000000000001d RDI: ffff8c21db497270
RBP: ffff8c21db497270 R08: ffff8c29f4748600 R09: 000000010020001a
R10: ffffb6df87e07aa0 R11: ffffffff9a445600 R12: 0000000000000007
R13: 0000000000000000 R14: ffff8c21f03f2900 R15: ffff8c21f03b8df0
Call Trace:
inet_csk_destroy_sock+0x55/0x100
tcp_close+0x25d/0x400
? tcp_check_oom+0x120/0x120
tls_sk_proto_close+0x127/0x1c0
inet_release+0x3c/0x60
__sock_release+0x3d/0xb0
sock_close+0x11/0x20
__fput+0xd8/0x210
task_work_run+0x84/0xa0
do_exit+0x2dc/0xb90
? release_sock+0x43/0x90
do_group_exit+0x3a/0xa0
get_signal+0x295/0x720
do_signal+0x36/0x610
? SYSC_recvfrom+0x11d/0x130
exit_to_usermode_loop+0x69/0xb0
do_syscall_64+0x173/0x180
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7fe9b9abc10d
RSP: 002b:00007fe9b19a1d48 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 0000000000000006 RCX: 00007fe9b9abc10d
RDX: 0000000000000002 RSI: 0000000000000080 RDI: 00007fe948003430
RBP: 00007fe948003410 R08: 00007fe948003430 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00005603739d9080
R13: 00007fe9b9ab9f90 R14: 00007fe948003430 R15: 0000000000000000
Fixes: 94850257cf0f ("tls: Fix tls_device handling of partial records")
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
- Set the raw NAND number of targets to the right value
- Fix a bug uncovered by a recent patch on Spansion SPI-NOR flashes
* tag 'mtd/fixes-for-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spi-nor: use 16-bit WRR command when QE is set on spansion flashes
mtd: rawnand: initialize ntargets with maxchips
|
|
SPI memory devices from different manufacturers have widely
different configurations for Status, Control and Configuration
registers. JEDEC 216C defines a new map for these common register
bits and their functions, and describes how the individual bits may
be accessed for a specific device. For the JEDEC 216B compliant
flashes, we can partially deduce Status and Configuration registers
functions by inspecting the 16th DWORD of BFPT. Older flashes that
don't declare the SFDP tables (SPANSION FL512SAIFG1 311QQ063 A ©11
SPANSION) let the software decide how to interact with these registers.
The commit dcb4b22eeaf4 ("spi-nor: s25fl512s supports region locking")
uncovered a probe error for s25fl512s, when the Quad Enable bit CR[1]
was set to one in the bootloader. When this bit is one, only the Write
Status (01h) command with two data byts may be used, the 01h command with
one data byte is not recognized and hence the error when trying to clear
the block protection bits.
Fix the above by using the Write Status (01h) command with two data bytes
when the Quad Enable bit is one.
Backward compatibility should be fine. The newly introduced
spi_nor_spansion_clear_sr_bp() is tightly coupled with the
spansion_quad_enable() function. Both assume that the Write Register
with 16 bits, together with the Read Configuration Register (35h)
instructions are supported.
Fixes: dcb4b22eeaf44f91 ("spi-nor: s25fl512s supports region locking")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: Jonas Bonn <jonas@norrbonn.se>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Tested-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Pull networking fixes from David Miller:
1) Fix leak of unqueued fragments in ipv6 nf_defrag, from Guillaume
Nault.
2) Don't access the DDM interface unless the transceiver implements it
in bnx2x, from Mauro S. M. Rodrigues.
3) Don't double fetch 'len' from userspace in sock_getsockopt(), from
JingYi Hou.
4) Sign extension overflow in lio_core, from Colin Ian King.
5) Various netem bug fixes wrt. corrupted packets from Jakub Kicinski.
6) Fix epollout hang in hvsock, from Sunil Muthuswamy.
7) Fix regression in default fib6_type, from David Ahern.
8) Handle memory limits in tcp_fragment more appropriately, from Eric
Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits)
tcp: refine memory limit test in tcp_fragment()
inet: clear num_timeout reqsk_alloc()
net: mvpp2: debugfs: Add pmap to fs dump
ipv6: Default fib6_type to RTN_UNICAST when not set
net: hns3: Fix inconsistent indenting
net/af_iucv: always register net_device notifier
net/af_iucv: build proper skbs for HiperTransport
net/af_iucv: remove GFP_DMA restriction for HiperTransport
net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge()
hvsock: fix epollout hang from race condition
net/udp_gso: Allow TX timestamp with UDP GSO
net: netem: fix use after free and double free with packet corruption
net: netem: fix backlog accounting for corrupted GSO frames
net: lio_core: fix potential sign-extension overflow on large shift
tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb
ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL
ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL
tun: wake up waitqueues after IFF_UP is set
net: remove duplicate fetch in sock_getsockopt
tipc: fix issues with early FAILOVER_MSG from peer
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull still more SPDX updates from Greg KH:
"Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update
for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
that were "easy" to determine by pattern matching. The ones after this
are going to be a bit more difficult and the people on the spdx list
will be discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud,
always nice to see in a diffstat"
* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull two misc vfs fixes from Jan Kara:
"One small quota fix fixing spurious EDQUOT errors and one fanotify fix
fixing a bug in the new fanotify FID reporting code"
* tag 'for_v5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: update connector fsid cache on add mark
quota: fix a problem about transfer quota
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"Here's quite a few MMC fixes intended for v5.2-rc6. This time it also
contains fixes for a WiFi driver, which device is attached to the SDIO
interface. Patches for the WiFi driver have been acked by the
corresponding maintainers.
Summary:
MMC core:
- Make switch to eMMC HS400 more robust for some controllers
- Add two SDIO func API to manage re-tuning constraints
- Prevent processing SDIO IRQs when the card is suspended
MMC host:
- sdhi: Disallow broken HS400 for M3-W ES1.2, RZ/G2M and V3H
- mtk-sd: Fixup support for SDIO IRQs
- sdhci-pci-o2micro: Fixup support for tuning
Wireless BRCMFMAC (SDIO):
- Deal with expected transmission errors related to the idle states
(handled by the Always-On-Subsystem or AOS) on the SDIO-based WiFi
on rk3288-veyron-minnie, rk3288-veyron-speedy and
rk3288-veyron-mickey"
* tag 'mmc-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Prevent processing SDIO IRQs when the card is suspended
mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuning
brcmfmac: sdio: Don't tune while the card is off
mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()
brcmfmac: sdio: Disable auto-tuning around commands expected to fail
mmc: core: API to temporarily disable retuning for SDIO CRC errors
Revert "brcmfmac: disable command decode in sdio_aos"
mmc: mediatek: fix SDIO IRQ detection issue
mmc: mediatek: fix SDIO IRQ interrupt handle flow
mmc: core: complete HS400 before checking status
mmc: sdhi: disallow HS400 for M3-W ES1.2, RZ/G2M, and V3H
|
|
Pull block fixes from Jens Axboe:
"Three fixes that should go into this series.
One is a set of two patches from Christoph, fixing a page leak on same
page merges. Boiled down version of a bigger fix, but this one is more
appropriate for this late in the cycle (and easier to backport to
stable).
The last patch is for a divide error in MD, from Mariusz (via Song)"
* tag 'for-linus-20190620' of git://git.kernel.dk/linux-block:
md: fix for divide error in status_resync
block: fix page leak when merging to same page
block: return from __bio_try_merge_page if merging occured in the same page
|
|
KMSAN caught uninit-value in tcp_create_openreq_child() [1]
This is caused by a recent change, combined by the fact
that TCP cleared num_timeout, num_retrans and sk fields only
when a request socket was about to be queued.
Under syncookie mode, a temporary request socket is used,
and req->num_timeout could contain garbage.
Lets clear these three fields sooner, there is really no
point trying to defer this and risk other bugs.
[1]
BUG: KMSAN: uninit-value in tcp_create_openreq_child+0x157f/0x1cc0 net/ipv4/tcp_minisocks.c:526
CPU: 1 PID: 13357 Comm: syz-executor591 Not tainted 5.2.0-rc4+ #3
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x191/0x1f0 lib/dump_stack.c:113
kmsan_report+0x162/0x2d0 mm/kmsan/kmsan.c:611
__msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:304
tcp_create_openreq_child+0x157f/0x1cc0 net/ipv4/tcp_minisocks.c:526
tcp_v6_syn_recv_sock+0x761/0x2d80 net/ipv6/tcp_ipv6.c:1152
tcp_get_cookie_sock+0x16e/0x6b0 net/ipv4/syncookies.c:209
cookie_v6_check+0x27e0/0x29a0 net/ipv6/syncookies.c:252
tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1039 [inline]
tcp_v6_do_rcv+0xf1c/0x1ce0 net/ipv6/tcp_ipv6.c:1344
tcp_v6_rcv+0x60b7/0x6a30 net/ipv6/tcp_ipv6.c:1554
ip6_protocol_deliver_rcu+0x1433/0x22f0 net/ipv6/ip6_input.c:397
ip6_input_finish net/ipv6/ip6_input.c:438 [inline]
NF_HOOK include/linux/netfilter.h:305 [inline]
ip6_input+0x2af/0x340 net/ipv6/ip6_input.c:447
dst_input include/net/dst.h:439 [inline]
ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline]
NF_HOOK include/linux/netfilter.h:305 [inline]
ipv6_rcv+0x683/0x710 net/ipv6/ip6_input.c:272
__netif_receive_skb_one_core net/core/dev.c:4981 [inline]
__netif_receive_skb net/core/dev.c:5095 [inline]
process_backlog+0x721/0x1410 net/core/dev.c:5906
napi_poll net/core/dev.c:6329 [inline]
net_rx_action+0x738/0x1940 net/core/dev.c:6395
__do_softirq+0x4ad/0x858 kernel/softirq.c:293
do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1052
</IRQ>
do_softirq kernel/softirq.c:338 [inline]
__local_bh_enable_ip+0x199/0x1e0 kernel/softirq.c:190
local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32
rcu_read_unlock_bh include/linux/rcupdate.h:682 [inline]
ip6_finish_output2+0x213f/0x2670 net/ipv6/ip6_output.c:117
ip6_finish_output+0xae4/0xbc0 net/ipv6/ip6_output.c:150
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip6_output+0x5d3/0x720 net/ipv6/ip6_output.c:167
dst_output include/net/dst.h:433 [inline]
NF_HOOK include/linux/netfilter.h:305 [inline]
ip6_xmit+0x1f53/0x2650 net/ipv6/ip6_output.c:271
inet6_csk_xmit+0x3df/0x4f0 net/ipv6/inet6_connection_sock.c:135
__tcp_transmit_skb+0x4076/0x5b40 net/ipv4/tcp_output.c:1156
tcp_transmit_skb net/ipv4/tcp_output.c:1172 [inline]
tcp_write_xmit+0x39a9/0xa730 net/ipv4/tcp_output.c:2397
__tcp_push_pending_frames+0x124/0x4e0 net/ipv4/tcp_output.c:2573
tcp_send_fin+0xd43/0x1540 net/ipv4/tcp_output.c:3118
tcp_close+0x16ba/0x1860 net/ipv4/tcp.c:2403
inet_release+0x1f7/0x270 net/ipv4/af_inet.c:427
inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:470
__sock_release net/socket.c:601 [inline]
sock_close+0x156/0x490 net/socket.c:1273
__fput+0x4c9/0xba0 fs/file_table.c:280
____fput+0x37/0x40 fs/file_table.c:313
task_work_run+0x22e/0x2a0 kernel/task_work.c:113
tracehook_notify_resume include/linux/tracehook.h:185 [inline]
exit_to_usermode_loop arch/x86/entry/common.c:168 [inline]
prepare_exit_to_usermode+0x39d/0x4d0 arch/x86/entry/common.c:199
syscall_return_slowpath+0x90/0x5c0 arch/x86/entry/common.c:279
do_syscall_64+0xe2/0xf0 arch/x86/entry/common.c:305
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x401d50
Code: 01 f0 ff ff 0f 83 40 0d 00 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d dd 8d 2d 00 00 75 14 b8 03 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 14 0d 00 00 c3 48 83 ec 08 e8 7a 02 00 00
RSP: 002b:00007fff1cf58cf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000401d50
RDX: 000000000000001c RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00000000004a9050 R08: 0000000020000040 R09: 000000000000001c
R10: 0000000020004004 R11: 0000000000000246 R12: 0000000000402ef0
R13: 0000000000402f80 R14: 0000000000000000 R15: 0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:201 [inline]
kmsan_internal_poison_shadow+0x53/0xa0 mm/kmsan/kmsan.c:160
kmsan_kmalloc+0xa4/0x130 mm/kmsan/kmsan_hooks.c:177
kmem_cache_alloc+0x534/0xb00 mm/slub.c:2781
reqsk_alloc include/net/request_sock.h:84 [inline]
inet_reqsk_alloc+0xa8/0x600 net/ipv4/tcp_input.c:6384
cookie_v6_check+0xadb/0x29a0 net/ipv6/syncookies.c:173
tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1039 [inline]
tcp_v6_do_rcv+0xf1c/0x1ce0 net/ipv6/tcp_ipv6.c:1344
tcp_v6_rcv+0x60b7/0x6a30 net/ipv6/tcp_ipv6.c:1554
ip6_protocol_deliver_rcu+0x1433/0x22f0 net/ipv6/ip6_input.c:397
ip6_input_finish net/ipv6/ip6_input.c:438 [inline]
NF_HOOK include/linux/netfilter.h:305 [inline]
ip6_input+0x2af/0x340 net/ipv6/ip6_input.c:447
dst_input include/net/dst.h:439 [inline]
ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline]
NF_HOOK include/linux/netfilter.h:305 [inline]
ipv6_rcv+0x683/0x710 net/ipv6/ip6_input.c:272
__netif_receive_skb_one_core net/core/dev.c:4981 [inline]
__netif_receive_skb net/core/dev.c:5095 [inline]
process_backlog+0x721/0x1410 net/core/dev.c:5906
napi_poll net/core/dev.c:6329 [inline]
net_rx_action+0x738/0x1940 net/core/dev.c:6395
__do_softirq+0x4ad/0x858 kernel/softirq.c:293
do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1052
do_softirq kernel/softirq.c:338 [inline]
__local_bh_enable_ip+0x199/0x1e0 kernel/softirq.c:190
local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32
rcu_read_unlock_bh include/linux/rcupdate.h:682 [inline]
ip6_finish_output2+0x213f/0x2670 net/ipv6/ip6_output.c:117
ip6_finish_output+0xae4/0xbc0 net/ipv6/ip6_output.c:150
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip6_output+0x5d3/0x720 net/ipv6/ip6_output.c:167
dst_output include/net/dst.h:433 [inline]
NF_HOOK include/linux/netfilter.h:305 [inline]
ip6_xmit+0x1f53/0x2650 net/ipv6/ip6_output.c:271
inet6_csk_xmit+0x3df/0x4f0 net/ipv6/inet6_connection_sock.c:135
__tcp_transmit_skb+0x4076/0x5b40 net/ipv4/tcp_output.c:1156
tcp_transmit_skb net/ipv4/tcp_output.c:1172 [inline]
tcp_write_xmit+0x39a9/0xa730 net/ipv4/tcp_output.c:2397
__tcp_push_pending_frames+0x124/0x4e0 net/ipv4/tcp_output.c:2573
tcp_send_fin+0xd43/0x1540 net/ipv4/tcp_output.c:3118
tcp_close+0x16ba/0x1860 net/ipv4/tcp.c:2403
inet_release+0x1f7/0x270 net/ipv4/af_inet.c:427
inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:470
__sock_release net/socket.c:601 [inline]
sock_close+0x156/0x490 net/socket.c:1273
__fput+0x4c9/0xba0 fs/file_table.c:280
____fput+0x37/0x40 fs/file_table.c:313
task_work_run+0x22e/0x2a0 kernel/task_work.c:113
tracehook_notify_resume include/linux/tracehook.h:185 [inline]
exit_to_usermode_loop arch/x86/entry/common.c:168 [inline]
prepare_exit_to_usermode+0x39d/0x4d0 arch/x86/entry/common.c:199
syscall_return_slowpath+0x90/0x5c0 arch/x86/entry/common.c:279
do_syscall_64+0xe2/0xf0 arch/x86/entry/common.c:305
entry_SYSCALL_64_after_hwframe+0x63/0xe7
Fixes: 336c39a03151 ("tcp: undo init congestion window on false SYNACK timeout")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Based on 1 normalized pattern(s):
this file is free software you can redistribute it and or modify it
under the terms of version 2 of the gnu general public license as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin st fifth floor boston ma 02110
1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 8 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081207.443595178@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details you should have received a
copy of the gnu general public license along with this program if
not write to the free software foundation 51 franklin street fifth
floor boston ma 02110 1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081207.308909165@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
