summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2023-08-23net: do not allow gso_size to be set to GSO_BY_FRAGSEric Dumazet
[ Upstream commit b616be6b97688f2f2bd7c4a47ab32f27f94fb2a9 ] One missing check in virtio_net_hdr_to_skb() allowed syzbot to crash kernels again [1] Do not allow gso_size to be set to GSO_BY_FRAGS (0xffff), because this magic value is used by the kernel. [1] general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 0 PID: 5039 Comm: syz-executor401 Not tainted 6.5.0-rc5-next-20230809-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 RIP: 0010:skb_segment+0x1a52/0x3ef0 net/core/skbuff.c:4500 Code: 00 00 00 e9 ab eb ff ff e8 6b 96 5d f9 48 8b 84 24 00 01 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e ea 21 00 00 48 8b 84 24 00 01 RSP: 0018:ffffc90003d3f1c8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 000000000001fffe RCX: 0000000000000000 RDX: 000000000000000e RSI: ffffffff882a3115 RDI: 0000000000000070 RBP: ffffc90003d3f378 R08: 0000000000000005 R09: 000000000000ffff R10: 000000000000ffff R11: 5ee4a93e456187d6 R12: 000000000001ffc6 R13: dffffc0000000000 R14: 0000000000000008 R15: 000000000000ffff FS: 00005555563f2380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020020000 CR3: 000000001626d000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> udp6_ufo_fragment+0x9d2/0xd50 net/ipv6/udp_offload.c:109 ipv6_gso_segment+0x5c4/0x17b0 net/ipv6/ip6_offload.c:120 skb_mac_gso_segment+0x292/0x610 net/core/gso.c:53 __skb_gso_segment+0x339/0x710 net/core/gso.c:124 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x3a5/0xf10 net/core/dev.c:3625 __dev_queue_xmit+0x8f0/0x3d60 net/core/dev.c:4329 dev_queue_xmit include/linux/netdevice.h:3082 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24c7/0x5570 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:727 [inline] sock_sendmsg+0xd9/0x180 net/socket.c:750 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2496 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2550 __sys_sendmsg+0x117/0x1e0 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7ff27cdb34d9 Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Xin Long <lucien.xin@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20230816142158.1779798-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23sock: Fix misuse of sk_under_memory_pressure()Abel Wu
[ Upstream commit 2d0c88e84e483982067a82073f6125490ddf3614 ] The status of global socket memory pressure is updated when: a) __sk_mem_raise_allocated(): enter: sk_memory_allocated(sk) > sysctl_mem[1] leave: sk_memory_allocated(sk) <= sysctl_mem[0] b) __sk_mem_reduce_allocated(): leave: sk_under_memory_pressure(sk) && sk_memory_allocated(sk) < sysctl_mem[0] So the conditions of leaving global pressure are inconstant, which may lead to the situation that one pressured net-memcg prevents the global pressure from being cleared when there is indeed no global pressure, thus the global constrains are still in effect unexpectedly on the other sockets. This patch fixes this by ignoring the net-memcg's pressure when deciding whether should leave global memory pressure. Fixes: e1aab161e013 ("socket: initial cgroup code.") Signed-off-by: Abel Wu <wuyun.abel@bytedance.com> Acked-by: Shakeel Butt <shakeelb@google.com> Link: https://lore.kernel.org/r/20230816091226.1542-1-wuyun.abel@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemptionMarc Zyngier
[ Upstream commit b321c31c9b7b309dcde5e8854b741c8e6a9a05f0 ] Xiang reports that VMs occasionally fail to boot on GICv4.1 systems when running a preemptible kernel, as it is possible that a vCPU is blocked without requesting a doorbell interrupt. The issue is that any preemption that occurs between vgic_v4_put() and schedule() on the block path will mark the vPE as nonresident and *not* request a doorbell irq. This occurs because when the vcpu thread is resumed on its way to block, vcpu_load() will make the vPE resident again. Once the vcpu actually blocks, we don't request a doorbell anymore, and the vcpu won't be woken up on interrupt delivery. Fix it by tracking that we're entering WFI, and key the doorbell request on that flag. This allows us not to make the vPE resident when going through a preempt/schedule cycle, meaning we don't lose any state. Cc: stable@vger.kernel.org Fixes: 8e01d9a396e6 ("KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/put") Reported-by: Xiang Chen <chenxiang66@hisilicon.com> Suggested-by: Zenghui Yu <yuzenghui@huawei.com> Tested-by: Xiang Chen <chenxiang66@hisilicon.com> Co-developed-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20230713070657.3873244-1-maz@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23media: v4l2-mem2mem: add lock to protect parameter num_rdyYunfei Dong
[ Upstream commit 56b5c3e67b0f9af3f45cf393be048ee8d8a92694 ] Getting below error when using KCSAN to check the driver. Adding lock to protect parameter num_rdy when getting the value with function: v4l2_m2m_num_src_bufs_ready/v4l2_m2m_num_dst_bufs_ready. kworker/u16:3: [name:report&]BUG: KCSAN: data-race in v4l2_m2m_buf_queue kworker/u16:3: [name:report&] kworker/u16:3: [name:report&]read-write to 0xffffff8105f35b94 of 1 bytes by task 20865 on cpu 7: kworker/u16:3:  v4l2_m2m_buf_queue+0xd8/0x10c Signed-off-by: Pina Chen <pina.chen@mediatek.com> Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23iopoll: Call cpu_relax() in busy loopsGeert Uytterhoeven
[ Upstream commit b407460ee99033503993ac7437d593451fcdfe44 ] It is considered good practice to call cpu_relax() in busy loops, see Documentation/process/volatile-considered-harmful.rst. This can not only lower CPU power consumption or yield to a hyperthreaded twin processor, but also allows an architecture to mitigate hardware issues (e.g. ARM Erratum 754327 for Cortex-A9 prior to r2p0) in the architecture-specific cpu_relax() implementation. In addition, cpu_relax() is also a compiler barrier. It is not immediately obvious that the @op argument "function" will result in an actual function call (e.g. in case of inlining). Where a function call is a C sequence point, this is lost on inlining. Therefore, with agressive enough optimization it might be possible for the compiler to hoist the: (val) = op(args); "load" out of the loop because it doesn't see the value changing. The addition of cpu_relax() would inhibit this. As the iopoll helpers lack calls to cpu_relax(), people are sometimes reluctant to use them, and may fall back to open-coded polling loops (including cpu_relax() calls) instead. Fix this by adding calls to cpu_relax() to the iopoll helpers: - For the non-atomic case, it is sufficient to call cpu_relax() in case of a zero sleep-between-reads value, as a call to usleep_range() is a safe barrier otherwise. However, it doesn't hurt to add the call regardless, for simplicity, and for similarity with the atomic case below. - For the atomic case, cpu_relax() must be called regardless of the sleep-between-reads value, as there is no guarantee all architecture-specific implementations of udelay() handle this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/45c87bec3397fdd704376807f0eec5cc71be440f.1685692810.git.geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-16netfilter: nf_tables: report use refcount overflowPablo Neira Ayuso
commit 1689f25924ada8fe14a4a82c38925d04994c7142 upstream. Overflow use refcount checks are not complete. Add helper function to deal with object reference counter tracking. Report -EMFILE in case UINT_MAX is reached. nft_use_dec() splats in case that reference counter underflows, which should not ever happen. Add nft_use_inc_restore() and nft_use_dec_restore() which are used to restore reference counter from error and abort paths. Use u32 in nft_flowtable and nft_object since helper functions cannot work on bitfields. Remove the few early incomplete checks now that the helper functions are in place and used to check for refcount overflow. Fixes: 96518518cc41 ("netfilter: add nftables") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16wifi: cfg80211: fix sband iftype data lookup for AP_VLANFelix Fietkau
commit 5fb9a9fb71a33be61d7d8e8ba4597bfb18d604d0 upstream. AP_VLAN interfaces are virtual, so doesn't really exist as a type for capabilities. When passed in as a type, AP is the one that's really intended. Fixes: c4cbaf7973a7 ("cfg80211: Add support for HE") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230622165919.46841-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16tcp: add missing family to tcp_set_ca_state() tracepointEric Dumazet
commit 8a70ed9520c5fafaac91053cacdd44625c39e188 upstream. Before this code is copied, add the missing family, as we did in commit 3dd344ea84e1 ("net: tracepoint: exposing sk_family in all tcp:tracepoints") Fixes: 15fcdf6ae116 ("tcp: Add tracepoint for tcp_set_ca_state") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ping Gan <jacky_gam_2001@163.com> Cc: Manjusaka <me@manjusaka.me> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230808084923.2239142-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16bpf, sockmap: Fix bug that strp_done cannot be calledXu Kuohai
commit 809e4dc71a0f2b8d2836035d98603694fff11d5d upstream. strp_done is only called when psock->progs.stream_parser is not NULL, but stream_parser was set to NULL by sk_psock_stop_strp(), called by sk_psock_drop() earlier. So, strp_done can never be called. Introduce SK_PSOCK_RX_ENABLED to mark whether there is strp on psock. Change the condition for calling strp_done from judging whether stream_parser is set to judging whether this flag is set. This flag is only set once when strp_init() succeeds, and will never be cleared later. Fixes: c0d95d3380ee ("bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap") Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20230804073740.194770-3-xukuohai@huaweicloud.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16x86/speculation: Add cpu_show_gds() prototypeArnd Bergmann
commit a57c27c7ad85c420b7de44c6ee56692d51709dda upstream. The newly added function has two definitions but no prototypes: drivers/base/cpu.c:605:16: error: no previous prototype for 'cpu_show_gds' [-Werror=missing-prototypes] Add a declaration next to the other ones for this file to avoid the warning. Fixes: 8974eb588283b ("x86/speculation: Add Gather Data Sampling mitigation") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Cc: stable@kernel.org Link: https://lore.kernel.org/all/20230809130530.1913368-1-arnd%40kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16tpm: Disable RNG for all AMD fTPMsMario Limonciello
commit 554b841d470338a3b1d6335b14ee1cd0c8f5d754 upstream. The TPM RNG functionality is not necessary for entropy when the CPU already supports the RDRAND instruction. The TPM RNG functionality was previously disabled on a subset of AMD fTPM series, but reports continue to show problems on some systems causing stutter root caused to TPM RNG functionality. Expand disabling TPM RNG use for all AMD fTPMs whether they have versions that claim to have fixed or not. To accomplish this, move the detection into part of the TPM CRB registration and add a flag indicating that the TPM should opt-out of registration to hwrng. Cc: stable@vger.kernel.org # 6.1.y+ Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources") Fixes: f1324bbc4011 ("tpm: disable hwrng for fTPM on some AMD designs") Reported-by: daniil.stas@posteo.net Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217719 Reported-by: bitlord0xff@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217212 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11f2fs: fix to do sanity check on direct node in truncate_dnode()Chao Yu
commit a6ec83786ab9f13f25fb18166dee908845713a95 upstream. syzbot reports below bug: BUG: KASAN: slab-use-after-free in f2fs_truncate_data_blocks_range+0x122a/0x14c0 fs/f2fs/file.c:574 Read of size 4 at addr ffff88802a25c000 by task syz-executor148/5000 CPU: 1 PID: 5000 Comm: syz-executor148 Not tainted 6.4.0-rc7-syzkaller-00041-ge660abd551f1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351 print_report mm/kasan/report.c:462 [inline] kasan_report+0x11c/0x130 mm/kasan/report.c:572 f2fs_truncate_data_blocks_range+0x122a/0x14c0 fs/f2fs/file.c:574 truncate_dnode+0x229/0x2e0 fs/f2fs/node.c:944 f2fs_truncate_inode_blocks+0x64b/0xde0 fs/f2fs/node.c:1154 f2fs_do_truncate_blocks+0x4ac/0xf30 fs/f2fs/file.c:721 f2fs_truncate_blocks+0x7b/0x300 fs/f2fs/file.c:749 f2fs_truncate.part.0+0x4a5/0x630 fs/f2fs/file.c:799 f2fs_truncate include/linux/fs.h:825 [inline] f2fs_setattr+0x1738/0x2090 fs/f2fs/file.c:1006 notify_change+0xb2c/0x1180 fs/attr.c:483 do_truncate+0x143/0x200 fs/open.c:66 handle_truncate fs/namei.c:3295 [inline] do_open fs/namei.c:3640 [inline] path_openat+0x2083/0x2750 fs/namei.c:3791 do_filp_open+0x1ba/0x410 fs/namei.c:3818 do_sys_openat2+0x16d/0x4c0 fs/open.c:1356 do_sys_open fs/open.c:1372 [inline] __do_sys_creat fs/open.c:1448 [inline] __se_sys_creat fs/open.c:1442 [inline] __x64_sys_creat+0xcd/0x120 fs/open.c:1442 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is, inodeA references inodeB via inodeB's ino, once inodeA is truncated, it calls truncate_dnode() to truncate data blocks in inodeB's node page, it traverse mapping data from node->i.i_addr[0] to node->i.i_addr[ADDRS_PER_BLOCK() - 1], result in out-of-boundary access. This patch fixes to add sanity check on dnode page in truncate_dnode(), so that, it can help to avoid triggering such issue, and once it encounters such issue, it will record newly introduced ERROR_INVALID_NODE_REFERENCE error into superblock, later fsck can detect such issue and try repairing. Also, it removes f2fs_truncate_data_blocks() for cleanup due to the function has only one caller, and uses f2fs_truncate_data_blocks_range() instead. Reported-and-tested-by: syzbot+12cb4425b22169b52036@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/000000000000f3038a05fef867f8@google.com Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11vxlan: Fix nexthop hash sizeBenjamin Poirier
[ Upstream commit 0756384fb1bd38adb2ebcfd1307422f433a1d772 ] The nexthop code expects a 31 bit hash, such as what is returned by fib_multipath_hash() and rt6_multipath_hash(). Passing the 32 bit hash returned by skb_get_hash() can lead to problems related to the fact that 'int hash' is a negative number when the MSB is set. In the case of hash threshold nexthop groups, nexthop_select_path_hthr() will disproportionately select the first nexthop group entry. In the case of resilient nexthop groups, nexthop_select_path_res() may do an out of bounds access in nh_buckets[], for example: hash = -912054133 num_nh_buckets = 2 bucket_index = 65535 which leads to the following panic: BUG: unable to handle page fault for address: ffffc900025910c8 PGD 100000067 P4D 100000067 PUD 10026b067 PMD 0 Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI CPU: 4 PID: 856 Comm: kworker/4:3 Not tainted 6.5.0-rc2+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:nexthop_select_path+0x197/0xbf0 Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85 RSP: 0018:ffff88810c36f260 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8 RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219 R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0 R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900 FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc900025910c8 CR3: 0000000129d00000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x1ee/0x5c0 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? __pfx_page_fault_oops+0x10/0x10 ? search_bpf_extables+0xfe/0x1c0 ? fixup_exception+0x3b/0x470 ? exc_page_fault+0xf6/0x110 ? asm_exc_page_fault+0x26/0x30 ? nexthop_select_path+0x197/0xbf0 ? nexthop_select_path+0x197/0xbf0 ? lock_is_held_type+0xe7/0x140 vxlan_xmit+0x5b2/0x2340 ? __lock_acquire+0x92b/0x3370 ? __pfx_vxlan_xmit+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_register_lock_class+0x10/0x10 ? skb_network_protocol+0xce/0x2d0 ? dev_hard_start_xmit+0xca/0x350 ? __pfx_vxlan_xmit+0x10/0x10 dev_hard_start_xmit+0xca/0x350 __dev_queue_xmit+0x513/0x1e20 ? __pfx___dev_queue_xmit+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? mark_held_locks+0x44/0x90 ? skb_push+0x4c/0x80 ? eth_header+0x81/0xe0 ? __pfx_eth_header+0x10/0x10 ? neigh_resolve_output+0x215/0x310 ? ip6_finish_output2+0x2ba/0xc90 ip6_finish_output2+0x2ba/0xc90 ? lock_release+0x236/0x3e0 ? ip6_mtu+0xbb/0x240 ? __pfx_ip6_finish_output2+0x10/0x10 ? find_held_lock+0x83/0xa0 ? lock_is_held_type+0xe7/0x140 ip6_finish_output+0x1ee/0x780 ip6_output+0x138/0x460 ? __pfx_ip6_output+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_ip6_finish_output+0x10/0x10 NF_HOOK.constprop.0+0xc0/0x420 ? __pfx_NF_HOOK.constprop.0+0x10/0x10 ? ndisc_send_skb+0x2c0/0x960 ? __pfx_lock_release+0x10/0x10 ? __local_bh_enable_ip+0x93/0x110 ? lock_is_held_type+0xe7/0x140 ndisc_send_skb+0x4be/0x960 ? __pfx_ndisc_send_skb+0x10/0x10 ? mark_held_locks+0x65/0x90 ? find_held_lock+0x83/0xa0 ndisc_send_ns+0xb0/0x110 ? __pfx_ndisc_send_ns+0x10/0x10 addrconf_dad_work+0x631/0x8e0 ? lock_acquire+0x180/0x3f0 ? __pfx_addrconf_dad_work+0x10/0x10 ? mark_held_locks+0x24/0x90 process_one_work+0x582/0x9c0 ? __pfx_process_one_work+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? mark_held_locks+0x24/0x90 worker_thread+0x93/0x630 ? __kthread_parkme+0xdc/0x100 ? __pfx_worker_thread+0x10/0x10 kthread+0x1a5/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 RIP: 0000:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0000:0000000000000000 EFLAGS: 00000000 ORIG_RAX: 0000000000000000 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: CR2: ffffc900025910c8 ---[ end trace 0000000000000000 ]--- RIP: 0010:nexthop_select_path+0x197/0xbf0 Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85 RSP: 0018:ffff88810c36f260 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8 RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219 R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0 R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900 FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000129d00000 CR4: 0000000000750ee0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x2ca00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fix this problem by ensuring the MSB of hash is 0 using a right shift - the same approach used in fib_multipath_hash() and rt6_multipath_hash(). Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-11net: annotate data-races around sk->sk_markEric Dumazet
[ Upstream commit 3c5b4d69c358a9275a8de98f87caf6eda644b086 ] sk->sk_mark is often read while another thread could change the value. Fixes: 4a19ec5800fc ("[NET]: Introducing socket mark socket option.") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-11word-at-a-time: use the same return type for has_zero regardless of endiannessndesaulniers@google.com
[ Upstream commit 79e8328e5acbe691bbde029a52c89d70dcbc22f3 ] Compiling big-endian targets with Clang produces the diagnostic: fs/namei.c:2173:13: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] } while (!(has_zero(a, &adata, &constants) | has_zero(b, &bdata, &constants))); ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ || fs/namei.c:2173:13: note: cast one or both operands to int to silence this warning It appears that when has_zero was introduced, two definitions were produced with different signatures (in particular different return types). Looking at the usage in hash_name() in fs/namei.c, I suspect that has_zero() is meant to be invoked twice per while loop iteration; using logical-or would not update `bdata` when `a` did not have zeros. So I think it's preferred to always return an unsigned long rather than a bool than update the while loop in hash_name() to use a logical-or rather than bitwise-or. [ Also changed powerpc version to do the same - Linus ] Link: https://github.com/ClangBuiltLinux/linux/issues/1832 Link: https://lore.kernel.org/lkml/20230801-bitwise-v1-1-799bec468dc4@google.com/ Fixes: 36126f8f2ed8 ("word-at-a-time: make the interfaces truly generic") Debugged-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-08x86/srso: Add a Speculative RAS Overflow mitigationBorislav Petkov (AMD)
Upstream commit: fb3bd914b3ec28f5fb697ac55c4846ac2d542855 Add a mitigation for the speculative return address stack overflow vulnerability found on AMD processors. The mitigation works by ensuring all RET instructions speculate to a controlled location, similar to how speculation is controlled in the retpoline sequence. To accomplish this, the __x86_return_thunk forces the CPU to mispredict every function return using a 'safe return' sequence. To ensure the safety of this mitigation, the kernel must ensure that the safe return sequence is itself free from attacker interference. In Zen3 and Zen4, this is accomplished by creating a BTB alias between the untraining function srso_untrain_ret_alias() and the safe return function srso_safe_ret_alias() which results in evicting a potentially poisoned BTB entry and using that safe one for all function returns. In older Zen1 and Zen2, this is accomplished using a reinterpretation technique similar to Retbleed one: srso_untrain_ret() and srso_safe_ret(). Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-08mm: Move mm_cachep initialization to mm_init()Peter Zijlstra
commit af80602799681c78f14fbe20b6185a56020dedee upstream. In order to allow using mm_alloc() much earlier, move initializing mm_cachep into mm_init(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221025201057.751153381@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-08x86/mm: Use mm_alloc() in poking_init()Peter Zijlstra
commit 3f4c8211d982099be693be9aa7d6fc4607dff290 upstream. Instead of duplicating init_mm, allocate a fresh mm. The advantage is that mm_alloc() has much simpler dependencies. Additionally it makes more conceptual sense, init_mm has no (and must not have) user state to duplicate. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221025201057.816175235@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-08init: Remove check_bugs() leftoversThomas Gleixner
commit 61235b24b9cb37c13fcad5b9596d59a1afdcec30 upstream Everything is converted over to arch_cpu_finalize_init(). Remove the check_bugs() leftovers including the empty stubs in asm-generic, alpha, parisc, powerpc and xtensa. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Link: https://lore.kernel.org/r/20230613224545.553215951@linutronix.de Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-08init: Provide arch_cpu_finalize_init()Thomas Gleixner
commit 7725acaa4f0c04fbefb0e0d342635b967bb7d414 upstream check_bugs() has become a dumping ground for all sorts of activities to finalize the CPU initialization before running the rest of the init code. Most are empty, a few do actual bug checks, some do alternative patching and some cobble a CPU advertisement string together.... Aside of that the current implementation requires duplicated function declaration and mostly empty header files for them. Provide a new function arch_cpu_finalize_init(). Provide a generic declaration if CONFIG_ARCH_HAS_CPU_FINALIZE_INIT is selected and a stub inline otherwise. This requires a temporary #ifdef in start_kernel() which will be removed along with check_bugs() once the architectures are converted over. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230613224544.957805717@linutronix.de Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03dma-buf: keep the signaling time of merged fences v3Christian König
commit f781f661e8c99b0cb34129f2e374234d61864e77 upstream. Some Android CTS is testing if the signaling time keeps consistent during merges. v2: use the current time if the fence is still in the signaling path and the timestamp not yet available. v3: improve comment, fix one more case to use the correct timestamp Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230630120041.109216-1-christian.koenig@amd.com Cc: Jindong Yue <jindong.yue@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03block: Fix a source code comment in include/uapi/linux/blkzoned.hBart Van Assche
[ Upstream commit e0933b526fbfd937c4a8f4e35fcdd49f0e22d411 ] Fix the symbolic names for zone conditions in the blkzoned.h header file. Cc: Hannes Reinecke <hare@suse.de> Cc: Damien Le Moal <dlemoal@kernel.org> Fixes: 6a0cb1bc106f ("block: Implement support for zoned block devices") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230706201422.3987341-1-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03tcp: Reduce chance of collisions in inet6_hashfn().Stewart Smith
[ Upstream commit d11b0df7ddf1831f3e170972f43186dad520bfcc ] For both IPv4 and IPv6 incoming TCP connections are tracked in a hash table with a hash over the source & destination addresses and ports. However, the IPv6 hash is insufficient and can lead to a high rate of collisions. The IPv6 hash used an XOR to fit everything into the 96 bits for the fast jenkins hash, meaning it is possible for an external entity to ensure the hash collides, thus falling back to a linear search in the bucket, which is slow. We take the approach of hash the full length of IPv6 address in __ipv6_addr_jhash() so that all users can benefit from a more secure version. While this may look like it adds overhead, the reality of modern CPUs means that this is unmeasurable in real world scenarios. In simulating with llvm-mca, the increase in cycles for the hashing code was ~16 cycles on Skylake (from a base of ~155), and an extra ~9 on Nehalem (base of ~173). In commit dd6d2910c5e0 ("netfilter: conntrack: switch to siphash") netfilter switched from a jenkins hash to a siphash, but even the faster hsiphash is a more significant overhead (~20-30%) in some preliminary testing. So, in this patch, we keep to the more conservative approach to ensure we don't add much overhead per SYN. In testing, this results in a consistently even spread across the connection buckets. In both testing and real-world scenarios, we have not found any measurable performance impact. Fixes: 08dcdbf6a7b9 ("ipv6: use a stronger hash for tcp") Signed-off-by: Stewart Smith <trawets@amazon.com> Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com> Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230721222410.17914-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03vxlan: calculate correct header length for GPEJiri Benc
[ Upstream commit 94d166c5318c6edd1e079df8552233443e909c33 ] VXLAN-GPE does not add an extra inner Ethernet header. Take that into account when calculating header length. This causes problems in skb_tunnel_check_pmtu, where incorrect PMTU is cached. In the collect_md mode (which is the only mode that VXLAN-GPE supports), there's no magic auto-setting of the tunnel interface MTU. It can't be, since the destination and thus the underlying interface may be different for each packet. So, the administrator is responsible for setting the correct tunnel interface MTU. Apparently, the administrators are capable enough to calculate that the maximum MTU for VXLAN-GPE is (their_lower_MTU - 36). They set the tunnel interface MTU to 1464. If you run a TCP stream over such interface, it's then segmented according to the MTU 1464, i.e. producing 1514 bytes frames. Which is okay, this still fits the lower MTU. However, skb_tunnel_check_pmtu (called from vxlan_xmit_one) uses 50 as the header size and thus incorrectly calculates the frame size to be 1528. This leads to ICMP too big message being generated (locally), PMTU of 1450 to be cached and the TCP stream to be resegmented. The fix is to use the correct actual header size, especially for skb_tunnel_check_pmtu calculation. Fixes: e1e5314de08ba ("vxlan: implement GPE") Signed-off-by: Jiri Benc <jbenc@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03pwm: Add a stub for devm_pwmchip_add()Andy Shevchenko
commit 88da4e8113110d5f4ebdd2f8cd0899e300cd1954 upstream. The devm_pwmchip_add() can be called by a module that optionally instantiates PWM chip. In the case of CONFIG_PWM=n, the compilation can't be performed. Hence, add a necessary stub. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27drm/dp_mst: Clear MSG_RDY flag before sending new messageWayne Lin
commit 72f1de49ffb90b29748284f27f1d6b829ab1de95 upstream. [Why] The sequence for collecting down_reply from source perspective should be: Request_n->repeat (get partial reply of Request_n->clear message ready flag to ack DPRX that the message is received) till all partial replies for Request_n are received->new Request_n+1. Now there is chance that drm_dp_mst_hpd_irq() will fire new down request in the tx queue when the down reply is incomplete. Source is restricted to generate interveleaved message transactions so we should avoid it. Also, while assembling partial reply packets, reading out DPCD DOWN_REP Sideband MSG buffer + clearing DOWN_REP_MSG_RDY flag should be wrapped up as a complete operation for reading out a reply packet. Kicking off a new request before clearing DOWN_REP_MSG_RDY flag might be risky. e.g. If the reply of the new request has overwritten the DPRX DOWN_REP Sideband MSG buffer before source writing one to clear DOWN_REP_MSG_RDY flag, source then unintentionally flushes the reply for the new request. Should handle the up request in the same way. [How] Separete drm_dp_mst_hpd_irq() into 2 steps. After acking the MST IRQ event, driver calls drm_dp_mst_hpd_irq_send_new_request() and might trigger drm_dp_mst_kick_tx() only when there is no on going message transaction. Changes since v1: * Reworked on review comments received -> Adjust the fix to let driver explicitly kick off new down request when mst irq event is handled and acked -> Adjust the commit message Changes since v2: * Adjust the commit message * Adjust the naming of the divided 2 functions and add a new input parameter "ack". * Adjust code flow as per review comments. Changes since v3: * Update the function description of drm_dp_mst_hpd_irq_handle_event Changes since v4: * Change ack of drm_dp_mst_hpd_irq_handle_event() to be an array align the size of esi[] Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27tcp: annotate data-races around fastopenq.max_qlenEric Dumazet
[ Upstream commit 70f360dd7042cb843635ece9d28335a4addff9eb ] This field can be read locklessly. Fixes: 1536e2857bd3 ("tcp: Add a TCP_FASTOPEN socket option to get a max backlog on its listner") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230719212857.3943972-12-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27tcp: annotate data-races around tp->notsent_lowatEric Dumazet
[ Upstream commit 1aeb87bc1440c5447a7fa2d6e3c2cca52cbd206b ] tp->notsent_lowat can be read locklessly from do_tcp_getsockopt() and tcp_poll(). Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230719212857.3943972-10-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27tcp: annotate data-races around tp->keepalive_probesEric Dumazet
[ Upstream commit 6e5e1de616bf5f3df1769abc9292191dfad9110a ] do_tcp_getsockopt() reads tp->keepalive_probes while another cpu might change its value. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230719212857.3943972-6-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27tcp: annotate data-races around tp->keepalive_intvlEric Dumazet
[ Upstream commit 5ecf9d4f52ff2f1d4d44c9b68bc75688e82f13b4 ] do_tcp_getsockopt() reads tp->keepalive_intvl while another cpu might change its value. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230719212857.3943972-5-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27tcp: annotate data-races around tp->keepalive_timeEric Dumazet
[ Upstream commit 4164245c76ff906c9086758e1c3f87082a7f5ef5 ] do_tcp_getsockopt() reads tp->keepalive_time while another cpu might change its value. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230719212857.3943972-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27Bluetooth: use RCU for hci_conn_params and iterate safely in hci_syncPauli Virtanen
[ Upstream commit 195ef75e19287b4bc413da3e3e3722b030ac881e ] hci_update_accept_list_sync iterates over hdev->pend_le_conns and hdev->pend_le_reports, and waits for controller events in the loop body, without holding hdev lock. Meanwhile, these lists and the items may be modified e.g. by le_scan_cleanup. This can invalidate the list cursor or any other item in the list, resulting to invalid behavior (eg use-after-free). Use RCU for the hci_conn_params action lists. Since the loop bodies in hci_sync block and we cannot use RCU or hdev->lock for the whole loop, copy list items first and then iterate on the copy. Only the flags field is written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we read valid values. Free params everywhere with hci_conn_params_free so the cleanup is guaranteed to be done properly. This fixes the following, which can be triggered e.g. by BlueZ new mgmt-tester case "Add + Remove Device Nowait - Success", or by changing hci_le_set_cig_params to always return false, and running iso-tester: ================================================================== BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107) print_report (mm/kasan/report.c:320 mm/kasan/report.c:430) ? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) kasan_report (mm/kasan/report.c:538) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) ? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780) ? mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_unlock (kernel/locking/mutex.c:538) ? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861) hci_cmd_sync_work (net/bluetooth/hci_sync.c:306) process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538) ? __pfx_worker_thread (kernel/workqueue.c:2480) kthread (kernel/kthread.c:376) ? __pfx_kthread (kernel/kthread.c:331) ret_from_fork (arch/x86/entry/entry_64.S:314) </TASK> Allocated by task 31: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) __kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383) hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277) hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589) hci_connect_cis (net/bluetooth/hci_conn.c:2266) iso_connect_cis (net/bluetooth/iso.c:390) iso_sock_connect (net/bluetooth/iso.c:899) __sys_connect (net/socket.c:2003 net/socket.c:2020) __x64_sys_connect (net/socket.c:2027) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) Freed by task 15: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) kasan_save_free_info (mm/kasan/generic.c:523) __kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244) __kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800) hci_conn_params_del (net/bluetooth/hci_core.c:2323) le_scan_cleanup (net/bluetooth/hci_conn.c:202) process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538) kthread (kernel/kthread.c:376) ret_from_fork (arch/x86/entry/entry_64.S:314) ================================================================== Fixes: e8907f76544f ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27net: ipv4: use consistent txhash in TIME_WAIT and SYN_RECVAntoine Tenart
[ Upstream commit c0a8966e2bc7d31f77a7246947ebc09c1ff06066 ] When using IPv4/TCP, skb->hash comes from sk->sk_txhash except in TIME_WAIT and SYN_RECV where it's not set in the reply skb from ip_send_unicast_reply. Those packets will have a mismatched hash with others from the same flow as their hashes will be 0. IPv6 does not have the same issue as the hash is set from the socket txhash in those cases. This commits sets the hash in the reply skb from ip_send_unicast_reply, which makes the IPv4 code behaving like IPv6. Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: 5e5265522a9a ("tcp: annotate data-races around tcp_rsk(req)->txhash") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27sched/psi: use kernfs polling functions for PSI trigger pollingSuren Baghdasaryan
[ Upstream commit aff037078ecaecf34a7c2afab1341815f90fba5e ] Destroying psi trigger in cgroup_file_release causes UAF issues when a cgroup is removed from under a polling process. This is happening because cgroup removal causes a call to cgroup_file_release while the actual file is still alive. Destroying the trigger at this point would also destroy its waitqueue head and if there is still a polling process on that file accessing the waitqueue, it will step on the freed pointer: do_select vfs_poll do_rmdir cgroup_rmdir kernfs_drain_open_files cgroup_file_release cgroup_pressure_release psi_trigger_destroy wake_up_pollfree(&t->event_wait) // vfs_poll is unblocked synchronize_rcu kfree(t) poll_freewait -> UAF access to the trigger's waitqueue head Patch [1] fixed this issue for epoll() case using wake_up_pollfree(), however the same issue exists for synchronous poll() case. The root cause of this issue is that the lifecycles of the psi trigger's waitqueue and of the file associated with the trigger are different. Fix this by using kernfs_generic_poll function when polling on cgroup-specific psi triggers. It internally uses kernfs_open_node->poll waitqueue head with its lifecycle tied to the file's lifecycle. This also renders the fix in [1] obsolete, so revert it. [1] commit c2dbe32d5db5 ("sched/psi: Fix use-after-free in ep_remove_wait_queue()") Fixes: 0e94682b73bf ("psi: introduce psi monitor") Closes: https://lore.kernel.org/all/20230613062306.101831-1-lujialin4@huawei.com/ Reported-by: Lu Jialin <lujialin4@huawei.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20230630005612.1014540-1-surenb@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27sched/psi: Allow unprivileged polling of N*2s periodDomenico Cerasuolo
[ Upstream commit d82caa273565b45fcf103148950549af76c314b0 ] PSI offers 2 mechanisms to get information about a specific resource pressure. One is reading from /proc/pressure/<resource>, which gives average pressures aggregated every 2s. The other is creating a pollable fd for a specific resource and cgroup. The trigger creation requires CAP_SYS_RESOURCE, and gives the possibility to pick specific time window and threshold, spawing an RT thread to aggregate the data. Systemd would like to provide containers the option to monitor pressure on their own cgroup and sub-cgroups. For example, if systemd launches a container that itself then launches services, the container should have the ability to poll() for pressure in individual services. But neither the container nor the services are privileged. This patch implements a mechanism to allow unprivileged users to create pressure triggers. The difference with privileged triggers creation is that unprivileged ones must have a time window that's a multiple of 2s. This is so that we can avoid unrestricted spawning of rt threads, and use instead the same aggregation mechanism done for the averages, which runs independently of any triggers. Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Link: https://lore.kernel.org/r/20230330105418.77061-5-cerasuolodomenico@gmail.com Stable-dep-of: aff037078eca ("sched/psi: use kernfs polling functions for PSI trigger polling") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27sched/psi: Rename existing poll members in preparationDomenico Cerasuolo
[ Upstream commit 65457b74aa9437418e552e8d52d7112d4f9901a6 ] Renaming in PSI implementation to make a clear distinction between privileged and unprivileged triggers code to be implemented in the next patch. Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Link: https://lore.kernel.org/r/20230330105418.77061-3-cerasuolodomenico@gmail.com Stable-dep-of: aff037078eca ("sched/psi: use kernfs polling functions for PSI trigger polling") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27sched/psi: Fix avgs_work re-arm in psi_avgs_work()Chengming Zhou
[ Upstream commit 2fcd7bbae90a6d844da8660a9d27079281dfbba2 ] Pavan reported a problem that PSI avgs_work idle shutoff is not working at all. Because PSI_NONIDLE condition would be observed in psi_avgs_work()->collect_percpu_times()->get_recent_times() even if only the kworker running avgs_work on the CPU. Although commit 1b69ac6b40eb ("psi: fix aggregation idle shut-off") avoided the ping-pong wake problem when the worker sleep, psi_avgs_work() still will always re-arm the avgs_work, so shutoff is not working. This patch changes to use PSI_STATE_RESCHEDULE to flag whether to re-arm avgs_work in get_recent_times(). For the current CPU, we re-arm avgs_work only when (NR_RUNNING > 1 || NR_IOWAIT > 0 || NR_MEMSTALL > 0), for other CPUs we can just check PSI_NONIDLE delta. The new flag is only used in psi_avgs_work(), so we check in get_recent_times() that current_work() is avgs_work. One potential problem is that the brief period of non-idle time incurred between the aggregation run and the kworker's dequeue will be stranded in the per-cpu buckets until avgs_work run next time. The buckets can hold 4s worth of time, and future activity will wake the avgs_work with a 2s delay, giving us 2s worth of data we can leave behind when shut off the avgs_work. If the kworker run other works after avgs_work shut off and doesn't have any scheduler activities for 2s, this maybe a problem. Reported-by: Pavan Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Suren Baghdasaryan <surenb@google.com> Tested-by: Chengming Zhou <zhouchengming@bytedance.com> Link: https://lore.kernel.org/r/20221014110551.22695-1-zhouchengming@bytedance.com Stable-dep-of: aff037078eca ("sched/psi: use kernfs polling functions for PSI trigger polling") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-23fprobe: Ensure running fprobe_exit_handler() finished before calling ↵Masami Hiramatsu (Google)
rethook_free() commit 195b9cb5b288fec1c871ef89f78cc9a7461aad3a upstream. Ensure running fprobe_exit_handler() has finished before calling rethook_free() in the unregister_fprobe() so that caller can free the fprobe right after unregister_fprobe(). unregister_fprobe() ensured that all running fprobe_entry/exit_handler() have finished by calling unregister_ftrace_function() which synchronizes RCU. But commit 5f81018753df ("fprobe: Release rethook after the ftrace_ops is unregistered") changed to call rethook_free() after unregister_ftrace_function(). So call rethook_stop() to make rethook disabled before unregister_ftrace_function() and ensure it again. Here is the possible code flow that can call the exit handler after unregister_fprobe(). ------ CPU1 CPU2 call unregister_fprobe(fp) ... __fprobe_handler() rethook_hook() on probed function unregister_ftrace_function() return from probed function rethook hooks find rh->handler == fprobe_exit_handler call fprobe_exit_handler() rethook_free(): set rh->handler = NULL; return from unreigster_fprobe; call fp->exit_handler() <- (*) ------ (*) At this point, the exit handler is called after returning from unregister_fprobe(). This fixes it as following; ------ CPU1 CPU2 call unregister_fprobe() ... rethook_stop(): set rh->handler = NULL; __fprobe_handler() rethook_hook() on probed function unregister_ftrace_function() return from probed function rethook hooks find rh->handler == NULL return from rethook rethook_free() return from unreigster_fprobe; ------ Link: https://lore.kernel.org/all/168873859949.156157.13039240432299335849.stgit@devnote2/ Fixes: 5f81018753df ("fprobe: Release rethook after the ftrace_ops is unregistered") Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23Revert "8250: add support for ASIX devices with a FIFO bug"Jiaqing Zhao
commit a82d62f708545d22859584e0e0620da8e3759bbc upstream. This reverts commit eb26dfe8aa7eeb5a5aa0b7574550125f8aa4c3b3. Commit eb26dfe8aa7e ("8250: add support for ASIX devices with a FIFO bug") merged on Jul 13, 2012 adds a quirk for PCI_VENDOR_ID_ASIX (0x9710). But that ID is the same as PCI_VENDOR_ID_NETMOS defined in 1f8b061050c7 ("[PATCH] Netmos parallel/serial/combo support") merged on Mar 28, 2005. In pci_serial_quirks array, the NetMos entry always takes precedence over the ASIX entry even since it was initially merged, code in that commit is always unreachable. In my tests, adding the FIFO workaround to pci_netmos_init() makes no difference, and the vendor driver also does not have such workaround. Given that the code was never used for over a decade, it's safe to revert it. Also, the real PCI_VENDOR_ID_ASIX should be 0x125b, which is used on their newer AX99100 PCIe serial controllers released on 2016. The FIFO workaround should not be intended for these newer controllers, and it was never implemented in vendor driver. Fixes: eb26dfe8aa7e ("8250: add support for ASIX devices with a FIFO bug") Cc: stable <stable@kernel.org> Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230619155743.827859-1-jiaqing.zhao@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23net/sched: make psched_mtu() RTNL-less safePedro Tammela
[ Upstream commit 150e33e62c1fa4af5aaab02776b6c3812711d478 ] Eric Dumazet says[1]: ------- Speaking of psched_mtu(), I see that net/sched/sch_pie.c is using it without holding RTNL, so dev->mtu can be changed underneath. KCSAN could issue a warning. ------- Annotate dev->mtu with READ_ONCE() so KCSAN don't issue a warning. [1] https://lore.kernel.org/all/CANn89iJoJO5VtaJ-2=_d2aOQhb0Xw8iBT_Cxqp2HyuS-zj6azw@mail.gmail.com/ v1 -> v2: Fix commit message Fixes: d4b36210c2e6 ("net: pkt_sched: PIE AQM scheme") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230711021634.561598-1-pctammela@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-23nvme: fix the NVME_ID_NS_NVM_STS_MASK definitionAnkit Kumar
[ Upstream commit b938e6603660652dc3db66d3c915fbfed3bce21d ] As per NVMe command set specification 1.0c Storage tag size is 7 bits. Fixes: 4020aad85c67 ("nvme: add support for enhanced metadata") Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-23blk-crypto: use dynamic lock class for blk_crypto_profile::lockEric Biggers
[ Upstream commit 2fb48d88e77f29bf9d278f25bcfe82cf59a0e09b ] When a device-mapper device is passing through the inline encryption support of an underlying device, calls to blk_crypto_evict_key() take the blk_crypto_profile::lock of the device-mapper device, then take the blk_crypto_profile::lock of the underlying device (nested). This isn't a real deadlock, but it causes a lockdep report because there is only one lock class for all instances of this lock. Lockdep subclasses don't really work here because the hierarchy of block devices is dynamic and could have more than 2 levels. Instead, register a dynamic lock class for each blk_crypto_profile, and associate that with the lock. This avoids false-positive lockdep reports like the following: ============================================ WARNING: possible recursive locking detected 6.4.0-rc5 #2 Not tainted -------------------------------------------- fscryptctl/1421 is trying to acquire lock: ffffff80829ca418 (&profile->lock){++++}-{3:3}, at: __blk_crypto_evict_key+0x44/0x1c0 but task is already holding lock: ffffff8086b68ca8 (&profile->lock){++++}-{3:3}, at: __blk_crypto_evict_key+0xc8/0x1c0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&profile->lock); lock(&profile->lock); *** DEADLOCK *** May be due to missing lock nesting notation Fixes: 1b2628397058 ("block: Keyslot Manager for Inline Encryption") Reported-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230610061139.212085-1-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-23workqueue: clean up WORK_* constant types, clarify maskingLinus Torvalds
commit afa4bb778e48d79e4a642ed41e3b4e0de7489a6c upstream. Dave Airlie reports that gcc-13.1.1 has started complaining about some of the workqueue code in 32-bit arm builds: kernel/workqueue.c: In function ‘get_work_pwq’: kernel/workqueue.c:713:24: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 713 | return (void *)(data & WORK_STRUCT_WQ_DATA_MASK); | ^ [ ... a couple of other cases ... ] and while it's not immediately clear exactly why gcc started complaining about it now, I suspect it's some C23-induced enum type handlign fixup in gcc-13 is the cause. Whatever the reason for starting to complain, the code and data types are indeed disgusting enough that the complaint is warranted. The wq code ends up creating various "helper constants" (like that WORK_STRUCT_WQ_DATA_MASK) using an enum type, which is all kinds of confused. The mask needs to be 'unsigned long', not some unspecified enum type. To make matters worse, the actual "mask and cast to a pointer" is repeated a couple of times, and the cast isn't even always done to the right pointer, but - as the error case above - to a 'void *' with then the compiler finishing the job. That's now how we roll in the kernel. So create the masks using the proper types rather than some ambiguous enumeration, and use a nice helper that actually does the type conversion in one well-defined place. Incidentally, this magically makes clang generate better code. That, admittedly, is really just a sign of clang having been seriously confused before, and cleaning up the typing unconfuses the compiler too. Reported-by: Dave Airlie <airlied@gmail.com> Link: https://lore.kernel.org/lkml/CAPM=9twNnV4zMCvrPkw3H-ajZOH-01JVh_kDrxdPYQErz8ZTdA@mail.gmail.com/ Cc: Arnd Bergmann <arnd@arndb.de> Cc: Tejun Heo <tj@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-19blktrace: use inline function for blk_trace_remove() while blktrace is disabledYu Kuai
commit cbe7cff4a76bc749dd70264ca5cf924e2adf9296 upstream. If config is disabled, call blk_trace_remove() directly will trigger build warning, hence use inline function instead, prepare to fix blktrace debugfs entries leakage. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230610022003.2557284-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-19shmem: use ramfs_kill_sb() for kill_sb method of ramfs-based tmpfsRoberto Sassu
commit 36ce9d76b0a93bae799e27e4f5ac35478c676592 upstream. As the ramfs-based tmpfs uses ramfs_init_fs_context() for the init_fs_context method, which allocates fc->s_fs_info, use ramfs_kill_sb() to free it and avoid a memory leak. Link: https://lkml.kernel.org/r/20230607161523.2876433-1-roberto.sassu@huaweicloud.com Fixes: c3b1b1cbf002 ("ramfs: add support for "mode=" mount option") Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Cc: Hugh Dickins <hughd@google.com> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-19autofs: use flexible array in ioctl structureArnd Bergmann
commit e910c8e3aa02dc456e2f4c32cb479523c326b534 upstream. Commit df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") introduced a warning for the autofs_dev_ioctl structure: In function 'check_name', inlined from 'validate_dev_ioctl' at fs/autofs/dev-ioctl.c:131:9, inlined from '_autofs_dev_ioctl' at fs/autofs/dev-ioctl.c:624:8: fs/autofs/dev-ioctl.c:33:14: error: 'strchr' reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread] 33 | if (!strchr(name, '/')) | ^~~~~~~~~~~~~~~~~ In file included from include/linux/auto_dev-ioctl.h:10, from fs/autofs/autofs_i.h:10, from fs/autofs/dev-ioctl.c:14: include/uapi/linux/auto_dev-ioctl.h: In function '_autofs_dev_ioctl': include/uapi/linux/auto_dev-ioctl.h:112:14: note: source object 'path' of size 0 112 | char path[0]; | ^~~~ This is easily fixed by changing the gnu 0-length array into a c99 flexible array. Since this is a uapi structure, we have to be careful about possible regressions but this one should be fine as they are equivalent here. While it would break building with ancient gcc versions that predate c99, it helps building with --std=c99 and -Wpedantic builds in user space, as well as non-gnu compilers. This means we probably also want it fixed in stable kernels. Cc: stable@vger.kernel.org Cc: Kees Cook <keescook@chromium.org> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230523081944.581710-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-19watch_queue: prevent dangling pipe pointerSiddh Raman Pant
commit 943211c87427f25bd22e0e63849fb486bb5f87fa upstream. NULL the dangling pipe reference while clearing watch_queue. If not done, a reference to a freed pipe remains in the watch_queue, as this function is called before freeing a pipe in free_pipe_info() (see line 834 of fs/pipe.c). The sole use of wqueue->defunct is for checking if the watch queue has been cleared, but wqueue->pipe is also NULLed while clearing. Thus, wqueue->defunct is superfluous, as wqueue->pipe can be checked for NULL. Hence, the former can be removed. Tested with keyutils testsuite. Cc: stable@vger.kernel.org # 6.1 Signed-off-by: Siddh Raman Pant <code@siddh.me> Acked-by: David Howells <dhowells@redhat.com> Message-Id: <20230605143616.640517-1-code@siddh.me> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-19net: dsa: sja1105: always enable the send_meta optionsVladimir Oltean
[ Upstream commit a372d66af48506d9f7aaae2a474cd18f14d98cb8 ] incl_srcpt has the limitation, mentioned in commit b4638af8885a ("net: dsa: sja1105: always enable the INCL_SRCPT option"), that frames with a MAC DA of 01:80:c2:xx:yy:zz will be received as 01:80:c2:00:00:zz unless PTP RX timestamping is enabled. The incl_srcpt option was initially unconditionally enabled, then that changed with commit 42824463d38d ("net: dsa: sja1105: Limit use of incl_srcpt to bridge+vlan mode"), then again with b4638af8885a ("net: dsa: sja1105: always enable the INCL_SRCPT option"). Bottom line is that it now needs to be always enabled, otherwise the driver does not have a reliable source of information regarding source_port and switch_id for link-local traffic (tag_8021q VLANs may be imprecise since now they identify an entire bridging domain when ports are not standalone). If we accept that PTP RX timestamping (and therefore, meta frame generation) is always enabled in hardware, then that limitation could be avoided and packets with any MAC DA can be properly received, because meta frames do contain the original bytes from the MAC DA of their associated link-local packet. This change enables meta frame generation unconditionally, which also has the nice side effects of simplifying the switch control path (a switch reset is no longer required on hwtstamping settings change) and the tagger data path (it no longer needs to be informed whether to expect meta frames or not - it always does). Fixes: 227d07a07ef1 ("net: dsa: sja1105: Add support for traffic through standalone ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19net: fix net_dev_start_xmit trace event vs skb_transport_offset()Eric Dumazet
[ Upstream commit f88fcb1d7d961b4b402d675109726f94db87571c ] After blamed commit, we must be more careful about using skb_transport_offset(), as reminded us by syzbot: WARNING: CPU: 0 PID: 10 at include/linux/skbuff.h:2868 skb_transport_offset include/linux/skbuff.h:2977 [inline] WARNING: CPU: 0 PID: 10 at include/linux/skbuff.h:2868 perf_trace_net_dev_start_xmit+0x89a/0xce0 include/trace/events/net.h:14 Modules linked in: CPU: 0 PID: 10 Comm: kworker/u4:1 Not tainted 6.1.30-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet RIP: 0010:skb_transport_header include/linux/skbuff.h:2868 [inline] RIP: 0010:skb_transport_offset include/linux/skbuff.h:2977 [inline] RIP: 0010:perf_trace_net_dev_start_xmit+0x89a/0xce0 include/trace/events/net.h:14 Code: 8b 04 25 28 00 00 00 48 3b 84 24 c0 00 00 00 0f 85 4e 04 00 00 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc e8 56 22 01 fd <0f> 0b e9 f6 fc ff ff 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c 86 f9 ff RSP: 0018:ffffc900002bf700 EFLAGS: 00010293 RAX: ffffffff8485d8ca RBX: 000000000000ffff RCX: ffff888100914280 RDX: 0000000000000000 RSI: 000000000000ffff RDI: 000000000000ffff RBP: ffffc900002bf818 R08: ffffffff8485d5b6 R09: fffffbfff0f8fb5e R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff110217d8f67 R13: ffff88810bec7b3a R14: dffffc0000000000 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8881f6a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f96cf6d52f0 CR3: 000000012224c000 CR4: 0000000000350ef0 Call Trace: <TASK> [<ffffffff84715e35>] trace_net_dev_start_xmit include/trace/events/net.h:14 [inline] [<ffffffff84715e35>] xmit_one net/core/dev.c:3643 [inline] [<ffffffff84715e35>] dev_hard_start_xmit+0x705/0x980 net/core/dev.c:3660 [<ffffffff8471a232>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff85416493>] dev_queue_xmit include/linux/netdevice.h:3030 [inline] [<ffffffff85416493>] batadv_send_skb_packet+0x3f3/0x680 net/batman-adv/send.c:108 [<ffffffff85416744>] batadv_send_broadcast_skb+0x24/0x30 net/batman-adv/send.c:127 [<ffffffff853bc52a>] batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] [<ffffffff853bc52a>] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] [<ffffffff853bc52a>] batadv_iv_send_outstanding_bat_ogm_packet+0x69a/0x840 net/batman-adv/bat_iv_ogm.c:1701 [<ffffffff8151023c>] process_one_work+0x8ac/0x1170 kernel/workqueue.c:2289 [<ffffffff81511938>] worker_thread+0xaa8/0x12d0 kernel/workqueue.c:2436 Fixes: 66e4c8d95008 ("net: warn if transport header was not set") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19Bluetooth: MGMT: Fix marking SCAN_RSP as not connectableLuiz Augusto von Dentz
[ Upstream commit 73f55453ea5236a586a7f1b3d5e2ee051d655351 ] When receiving a scan response there is no way to know if the remote device is connectable or not, so when it cannot be merged don't make any assumption and instead just mark it with a new flag defined as MGMT_DEV_FOUND_SCAN_RSP so userspace can tell it is a standalone SCAN_RSP. Link: https://lore.kernel.org/linux-bluetooth/CABBYNZ+CYMsDSPTxBn09Js3BcdC-x7vZFfyLJ3ppZGGwJKmUTw@mail.gmail.com/ Fixes: c70a7e4cc8d2 ("Bluetooth: Add support for Not Connectable flag for Device Found events") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-01-08 04:51:45 +0000