summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2025-03-22Bluetooth: L2CAP: Fix corrupted list in hci_chan_delLuiz Augusto von Dentz
commit ab4eedb790cae44313759b50fe47da285e2519d5 upstream. This fixes the following trace by reworking the locking of l2cap_conn so instead of only locking when changing the chan_l list this promotes chan_lock to a general lock of l2cap_conn so whenever it is being held it would prevents the likes of l2cap_conn_del to run: list_del corruption, ffff888021297e00->prev is LIST_POISON2 (dead000000000122) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:61! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 5896 Comm: syz-executor213 Not tainted 6.14.0-rc1-next-20250204-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024 RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59 Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246 RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0 R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122 R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00 FS: 00007f7ace6686c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7aceeeb1d0 CR3: 000000003527c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:124 [inline] __list_del_entry include/linux/list.h:215 [inline] list_del_rcu include/linux/rculist.h:168 [inline] hci_chan_del+0x70/0x1b0 net/bluetooth/hci_conn.c:2858 l2cap_conn_free net/bluetooth/l2cap_core.c:1816 [inline] kref_put include/linux/kref.h:65 [inline] l2cap_conn_put+0x70/0xe0 net/bluetooth/l2cap_core.c:1830 l2cap_sock_shutdown+0xa8a/0x1020 net/bluetooth/l2cap_sock.c:1377 l2cap_sock_release+0x79/0x1d0 net/bluetooth/l2cap_sock.c:1416 __sock_release net/socket.c:642 [inline] sock_close+0xbc/0x240 net/socket.c:1393 __fput+0x3e9/0x9f0 fs/file_table.c:448 task_work_run+0x24f/0x310 kernel/task_work.c:227 ptrace_notify+0x2d2/0x380 kernel/signal.c:2522 ptrace_report_syscall include/linux/ptrace.h:415 [inline] ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline] syscall_exit_work+0xc7/0x1d0 kernel/entry/common.c:173 syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline] syscall_exit_to_user_mode+0x24a/0x340 kernel/entry/common.c:218 do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7aceeaf449 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f7ace668218 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: fffffffffffffffc RBX: 00007f7acef39328 RCX: 00007f7aceeaf449 RDX: 000000000000000e RSI: 0000000020000100 RDI: 0000000000000004 RBP: 00007f7acef39320 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 0000000000000004 R14: 00007f7ace668670 R15: 000000000000000b </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59 Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246 RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0 R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122 R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00 FS: 00007f7ace6686c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7acef05b08 CR3: 000000003527c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Reported-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com Tested-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com Fixes: b4f82f9ed43a ("Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-22mm/hugetlb: wait for hugetlb folios to be freedGe Yang
[ Upstream commit 67bab13307c83fb742c2556b06cdc39dbad27f07 ] Since the introduction of commit c77c0a8ac4c52 ("mm/hugetlb: defer freeing of huge pages if in non-task context"), which supports deferring the freeing of hugetlb pages, the allocation of contiguous memory through cma_alloc() may fail probabilistically. In the CMA allocation process, if it is found that the CMA area is occupied by in-use hugetlb folios, these in-use hugetlb folios need to be migrated to another location. When there are no available hugetlb folios in the free hugetlb pool during the migration of in-use hugetlb folios, new folios are allocated from the buddy system. A temporary state is set on the newly allocated folio. Upon completion of the hugetlb folio migration, the temporary state is transferred from the new folios to the old folios. Normally, when the old folios with the temporary state are freed, it is directly released back to the buddy system. However, due to the deferred freeing of hugetlb pages, the PageBuddy() check fails, ultimately leading to the failure of cma_alloc(). Here is a simplified call trace illustrating the process: cma_alloc() ->__alloc_contig_migrate_range() // Migrate in-use hugetlb folios ->unmap_and_move_huge_page() ->folio_putback_hugetlb() // Free old folios ->test_pages_isolated() ->__test_page_isolated_in_pageblock() ->PageBuddy(page) // Check if the page is in buddy To resolve this issue, we have implemented a function named wait_for_freed_hugetlb_folios(). This function ensures that the hugetlb folios are properly released back to the buddy system after their migration is completed. By invoking wait_for_freed_hugetlb_folios() before calling PageBuddy(), we ensure that PageBuddy() will succeed. Link: https://lkml.kernel.org/r/1739936804-18199-1-git-send-email-yangge1116@126.com Fixes: c77c0a8ac4c5 ("mm/hugetlb: defer freeing of huge pages if in non-task context") Signed-off-by: Ge Yang <yangge1116@126.com> Reviewed-by: Muchun Song <muchun.song@linux.dev> Acked-by: David Hildenbrand <david@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22block: change blk_mq_add_to_batch() third argument type to boolShin'ichiro Kawasaki
[ Upstream commit 9bce6b5f8987678b9c6c1fe433af6b5fe41feadc ] Commit 1f47ed294a2b ("block: cleanup and fix batch completion adding conditions") modified the evaluation criteria for the third argument, 'ioerror', in the blk_mq_add_to_batch() function. Initially, the function had checked if 'ioerror' equals zero. Following the commit, it started checking for negative error values, with the presumption that such values, for instance -EIO, would be passed in. However, blk_mq_add_to_batch() callers do not pass negative error values. Instead, they pass status codes defined in various ways: - NVMe PCI and Apple drivers pass NVMe status code - virtio_blk driver passes the virtblk request header status byte - null_blk driver passes blk_status_t These codes are either zero or positive, therefore the revised check fails to function as intended. Specifically, with the NVMe PCI driver, this modification led to the failure of the blktests test case nvme/039. In this test scenario, errors are artificially injected to the NVMe driver, resulting in positive NVMe status codes passed to blk_mq_add_to_batch(), which unexpectedly processes the failed I/O in a batch. Hence the failure. To correct the ioerror check within blk_mq_add_to_batch(), make all callers to uniformly pass the argument as boolean. Modify the callers to check their specific status codes and pass the boolean value 'is_error'. Also describe the arguments of blK_mq_add_to_batch as kerneldoc. Fixes: 1f47ed294a2b ("block: cleanup and fix batch completion adding conditions") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20250311104359.1767728-3-shinichiro.kawasaki@wdc.com [axboe: fold in documentation update] Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22ASoC: ops: Consistently treat platform_max as control valueCharles Keepax
[ Upstream commit 0eba2a7e858907a746ba69cd002eb9eb4dbd7bf3 ] This reverts commit 9bdd10d57a88 ("ASoC: ops: Shift tested values in snd_soc_put_volsw() by +min"), and makes some additional related updates. There are two ways the platform_max could be interpreted; the maximum register value, or the maximum value the control can be set to. The patch moved from treating the value as a control value to a register one. When the patch was applied it was technically correct as snd_soc_limit_volume() also used the register interpretation. However, even then most of the other usages treated platform_max as a control value, and snd_soc_limit_volume() has since been updated to also do so in commit fb9ad24485087 ("ASoC: ops: add correct range check for limiting volume"). That patch however, missed updating snd_soc_put_volsw() back to the control interpretation, and fixing snd_soc_info_volsw_range(). The control interpretation makes more sense as limiting is typically done from the machine driver, so it is appropriate to use the customer facing representation rather than the internal codec representation. Update all the code to consistently use this interpretation of platform_max. Finally, also add some comments to the soc_mixer_control struct to hopefully avoid further patches switching between the two approaches. Fixes: fb9ad24485087 ("ASoC: ops: add correct range check for limiting volume") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250228151456.3703342-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22fuse: don't truncate cached, mutated symlinkMiklos Szeredi
[ Upstream commit b4c173dfbb6c78568578ff18f9e8822d7bd0e31b ] Fuse allows the value of a symlink to change and this property is exploited by some filesystems (e.g. CVMFS). It has been observed, that sometimes after changing the symlink contents, the value is truncated to the old size. This is caused by fuse_getattr() racing with fuse_reverse_inval_inode(). fuse_reverse_inval_inode() updates the fuse_inode's attr_version, which results in fuse_change_attributes() exiting before updating the cached attributes This is okay, as the cached attributes remain invalid and the next call to fuse_change_attributes() will likely update the inode with the correct values. The reason this causes problems is that cached symlinks will be returned through page_get_link(), which truncates the symlink to inode->i_size. This is correct for filesystems that don't mutate symlinks, but in this case it causes bad behavior. The solution is to just remove this truncation. This can cause a regression in a filesystem that relies on supplying a symlink larger than the file size, but this is unlikely. If that happens we'd need to make this behavior conditional. Reported-by: Laura Promberger <laura.promberger@cern.ch> Tested-by: Sam Lewis <samclewis@google.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20250220100258.793363-1-mszeredi@redhat.com Reviewed-by: Bernd Schubert <bschubert@ddn.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22PCI: pci_ids: add INTEL_HDA_PTL_HPierre-Louis Bossart
[ Upstream commit a1f7b7ff0e10ae574d388131596390157222f986 ] Add Intel PTL-H audio Device ID. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250210081730.22916-2-peter.ujfalusi@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22kbuild: keep symbols for symbol_get() even with CONFIG_TRIM_UNUSED_KSYMSMasahiro Yamada
[ Upstream commit 4c56eb33e603c3b9eb4bd24efbfdd0283c1c37e4 ] Linus observed that the symbol_request(utf8_data_table) call fails when CONFIG_UNICODE=y and CONFIG_TRIM_UNUSED_KSYMS=y. symbol_get() relies on the symbol data being present in the ksymtab for symbol lookups. However, EXPORT_SYMBOL_GPL(utf8_data_table) is dropped due to CONFIG_TRIM_UNUSED_KSYMS, as no module references it in this case. Probably, this has been broken since commit dbacb0ef670d ("kconfig option for TRIM_UNUSED_KSYMS"). This commit addresses the issue by leveraging modpost. Symbol names passed to symbol_get() are recorded in the special .no_trim_symbol section, which is then parsed by modpost to forcibly keep such symbols. The .no_trim_symbol section is discarded by the linker scripts, so there is no impact on the size of the final vmlinux or modules. This commit cannot resolve the issue for direct calls to __symbol_get() because the symbol name is not known at compile-time. Although symbol_get() may eventually be deprecated, this workaround should be good enough meanwhile. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22Revert "Bluetooth: hci_core: Fix sleeping function called from invalid context"Luiz Augusto von Dentz
[ Upstream commit ab6ab707a4d060a51c45fc13e3b2228d5f7c0b87 ] This reverts commit 4d94f05558271654670d18c26c912da0c1c15549 which has problems (see [1]) and is no longer needed since 581dd2dc168f ("Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating") has reworked the code where the original bug has been found. [1] Link: https://lore.kernel.org/linux-bluetooth/877c55ci1r.wl-tiwai@suse.de/T/#t Fixes: 4d94f0555827 ("Bluetooth: hci_core: Fix sleeping function called from invalid context") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22netfilter: nf_tables: make destruction work queue pernetFlorian Westphal
[ Upstream commit fb8286562ecfb585e26b033c5e32e6fb85efb0b3 ] The call to flush_work before tearing down a table from the netlink notifier was supposed to make sure that all earlier updates (e.g. rule add) that might reference that table have been processed. Unfortunately, flush_work() waits for the last queued instance. This could be an instance that is different from the one that we must wait for. This is because transactions are protected with a pernet mutex, but the work item is global, so holding the transaction mutex doesn't prevent another netns from queueing more work. Make the work item pernet so that flush_work() will wait for all transactions queued from this netns. A welcome side effect is that we no longer need to wait for transaction objects from foreign netns. The gc work queue is still global. This seems to be ok because nft_set structures are reference counted and each container structure owns a reference on the net namespace. The destroy_list is still protected by a global spinlock rather than pernet one but the hold time is very short anyway. v2: call cancel_work_sync before reaping the remaining tables (Pablo). Fixes: 9f6958ba2e90 ("netfilter: nf_tables: unconditionally flush pending work before notifier") Reported-by: syzbot+5d8c5789c8cb076b2c25@syzkaller.appspotmail.com Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13mm: hugetlb: Add huge page size param to huge_ptep_get_and_clear()Ryan Roberts
commit 02410ac72ac3707936c07ede66e94360d0d65319 upstream. In order to fix a bug, arm64 needs to be told the size of the huge page for which the huge_pte is being cleared in huge_ptep_get_and_clear(). Provide for this by adding an `unsigned long sz` parameter to the function. This follows the same pattern as huge_pte_clear() and set_huge_pte_at(). This commit makes the required interface modifications to the core mm as well as all arches that implement this function (arm64, loongarch, mips, parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed in a separate commit. Cc: stable@vger.kernel.org Fixes: 66b3923a1a0f ("arm64: hugetlb: add support for PTE contiguous bit") Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> # riscv Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390 Link: https://lore.kernel.org/r/20250226120656.2400136-2-ryan.roberts@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13net: ethtool: plumb PHY stats to PHY driversJakub Kicinski
[ Upstream commit b7a2c1fe6b55364e61b4b54b991eb43a47bb1104 ] Introduce support for standardized PHY statistics reporting in ethtool by extending the PHYLIB framework. Add the functions phy_ethtool_get_phy_stats() and phy_ethtool_get_link_ext_stats() to provide a consistent interface for retrieving PHY-level and link-specific statistics. These functions are used within the ethtool implementation to avoid direct access to the phy_device structure outside of the PHYLIB framework. A new structure, ethtool_phy_stats, is introduced to standardize PHY statistics such as packet counts, byte counts, and error counters. Drivers are updated to include callbacks for retrieving PHY and link-specific statistics, ensuring values are explicitly set only for supported fields, initialized with ETHTOOL_STAT_NOT_SET to avoid ambiguity. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: 637399bf7e77 ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13cred: Fix RCU warnings in override/revert_credsHerbert Xu
[ Upstream commit e04918dc594669068f5d59d567d08db531167188 ] Fix RCU warnings in override_creds and revert_creds by turning the RCU pointer into a normal pointer using rcu_replace_pointer. These warnings were previously private to the cred code, but due to the move into the header file they are now polluting unrelated subsystems. Fixes: 49dffdfde462 ("cred: Add a light version of override/revert_creds()") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Link: https://lore.kernel.org/r/Z8QGQGW0IaSklKG7@gondor.apana.org.au Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13cred: return old creds from revert_creds_light()Christian Brauner
[ Upstream commit 95c54bc81791c210b131f2b1013942487e74896f ] So we can easily convert revert_creds() callers over to drop the reference count explicitly. Link: https://lore.kernel.org/r/20241125-work-cred-v2-2-68b9d38bb5b2@kernel.org Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org> Stable-dep-of: e04918dc5946 ("cred: Fix RCU warnings in override/revert_creds") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13nvme-tcp: add basic support for the C2HTermReq PDUMaurizio Lombardi
[ Upstream commit 84e009042d0f3dfe91bec60bcd208ee3f866cbcd ] Previously, the NVMe/TCP host driver did not handle the C2HTermReq PDU, instead printing "unsupported pdu type (3)" when received. This patch adds support for processing the C2HTermReq PDU, allowing the driver to print the Fatal Error Status field. Example of output: nvme nvme4: Received C2HTermReq (FES = Invalid PDU Header Field) Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Stable-dep-of: ad95bab0cd28 ("nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13NFS: fix nfs_release_folio() to not deadlock via kcompactd writebackMike Snitzer
commit ce6d9c1c2b5cc785016faa11b48b6cd317eb367e upstream. Add PF_KCOMPACTD flag and current_is_kcompactd() helper to check for it so nfs_release_folio() can skip calling nfs_wb_folio() from kcompactd. Otherwise NFS can deadlock waiting for kcompactd enduced writeback which recurses back to NFS (which triggers writeback to NFSD via NFS loopback mount on the same host, NFSD blocks waiting for XFS's call to __filemap_get_folio): 6070.550357] INFO: task kcompactd0:58 blocked for more than 4435 seconds. {--- [58] "kcompactd0" [<0>] folio_wait_bit+0xe8/0x200 [<0>] folio_wait_writeback+0x2b/0x80 [<0>] nfs_wb_folio+0x80/0x1b0 [nfs] [<0>] nfs_release_folio+0x68/0x130 [nfs] [<0>] split_huge_page_to_list_to_order+0x362/0x840 [<0>] migrate_pages_batch+0x43d/0xb90 [<0>] migrate_pages_sync+0x9a/0x240 [<0>] migrate_pages+0x93c/0x9f0 [<0>] compact_zone+0x8e2/0x1030 [<0>] compact_node+0xdb/0x120 [<0>] kcompactd+0x121/0x2e0 [<0>] kthread+0xcf/0x100 [<0>] ret_from_fork+0x31/0x40 [<0>] ret_from_fork_asm+0x1a/0x30 ---} [akpm@linux-foundation.org: fix build] Link: https://lkml.kernel.org/r/20250225022002.26141-1-snitzer@kernel.org Fixes: 96780ca55e3c ("NFS: fix up nfs_release_folio() to try to release the page") Signed-off-by: Mike Snitzer <snitzer@kernel.org> Cc: Anna Schumaker <anna.schumaker@oracle.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-07rcuref: Plug slowpath race in rcuref_put()Thomas Gleixner
commit b9a49520679e98700d3d89689cc91c08a1c88c1d upstream. Kernel test robot reported an "imbalanced put" in the rcuref_put() slow path, which turned out to be a false positive. Consider the following race: ref = 0 (via rcuref_init(ref, 1)) T1 T2 rcuref_put(ref) -> atomic_add_negative_release(-1, ref) # ref -> 0xffffffff -> rcuref_put_slowpath(ref) rcuref_get(ref) -> atomic_add_negative_relaxed(1, &ref->refcnt) -> return true; # ref -> 0 rcuref_put(ref) -> atomic_add_negative_release(-1, ref) # ref -> 0xffffffff -> rcuref_put_slowpath() -> cnt = atomic_read(&ref->refcnt); # cnt -> 0xffffffff / RCUREF_NOREF -> atomic_try_cmpxchg_release(&ref->refcnt, &cnt, RCUREF_DEAD)) # ref -> 0xe0000000 / RCUREF_DEAD -> return true -> cnt = atomic_read(&ref->refcnt); # cnt -> 0xe0000000 / RCUREF_DEAD -> if (cnt > RCUREF_RELEASED) # 0xe0000000 > 0xc0000000 -> WARN_ONCE(cnt >= RCUREF_RELEASED, "rcuref - imbalanced put()") The problem is the additional read in the slow path (after it decremented to RCUREF_NOREF) which can happen after the counter has been marked RCUREF_DEAD. Prevent this by reusing the return value of the decrement. Now every "final" put uses RCUREF_NOREF in the slow path and attempts the final cmpxchg() to RCUREF_DEAD. [ bigeasy: Add changelog ] Fixes: ee1ee6db07795 ("atomics: Provide rcuref - scalable reference counting") Reported-by: kernel test robot <oliver.sang@intel.com> Debugged-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/oe-lkp/202412311453.9d7636a2-lkp@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-07vmlinux.lds: Ensure that const vars with relocations are mapped R/OArd Biesheuvel
commit 68f3ea7ee199ef77551e090dfef5a49046ea8443 upstream. In the kernel, there are architectures (x86, arm64) that perform boot-time relocation (for KASLR) without relying on PIE codegen. In this case, all const global objects are emitted into .rodata, including const objects with fields that will be fixed up by the boot-time relocation code. This implies that .rodata (and .text in some cases) need to be writable at boot, but they will usually be mapped read-only as soon as the boot completes. When using PIE codegen, the compiler will emit const global objects into .data.rel.ro rather than .rodata if the object contains fields that need such fixups at boot-time. This permits the linker to annotate such regions as requiring read-write access only at load time, but not at execution time (in user space), while keeping .rodata truly const (in user space, this is important for reducing the CoW footprint of dynamic executables). This distinction does not matter for the kernel, but it does imply that const data will end up in writable memory if the .data.rel.ro sections are not treated in a special way, as they will end up in the writable .data segment by default. So emit .data.rel.ro into the .rodata segment. Cc: stable@vger.kernel.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250221135704.431269-5-ardb+git@google.com Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-07block: Remove zone write plugs when handling native zone append writesDamien Le Moal
commit a6aa36e957a1bfb5341986dec32d013d23228fe1 upstream. For devices that natively support zone append operations, REQ_OP_ZONE_APPEND BIOs are not processed through zone write plugging and are immediately issued to the zoned device. This means that there is no write pointer offset tracking done for these operations and that a zone write plug is not necessary. However, when receiving a zone append BIO, we may already have a zone write plug for the target zone if that zone was previously partially written using regular write operations. In such case, since the write pointer offset of the zone write plug is not incremented by the amount of sectors appended to the zone, 2 issues arise: 1) we risk leaving the plug in the disk hash table if the zone is fully written using zone append or regular write operations, because the write pointer offset will never reach the "zone full" state. 2) Regular write operations that are issued after zone append operations will always be failed by blk_zone_wplug_prepare_bio() as the write pointer alignment check will fail, even if the user correctly accounted for the zone append operations and issued the regular writes with a correct sector. Avoid these issues by immediately removing the zone write plug of zones that are the target of zone append operations when blk_zone_plug_bio() is called. The new function blk_zone_wplug_handle_native_zone_append() implements this for devices that natively support zone append. The removal of the zone write plug using disk_remove_zone_wplug() requires aborting all plugged regular write using disk_zone_wplug_abort() as otherwise the plugged write BIOs would never be executed (with the plug removed, the completion path will never see again the zone write plug as disk_get_zone_wplug() will return NULL). Rate-limited warnings are added to blk_zone_wplug_handle_native_zone_append() and to disk_zone_wplug_abort() to signal this. Since blk_zone_wplug_handle_native_zone_append() is called in the hot path for operations that will not be plugged, disk_get_zone_wplug() is optimized under the assumption that a user issuing zone append operations is not at the same time issuing regular writes and that there are no hashed zone write plugs. The struct gendisk atomic counter nr_zone_wplugs is added to check this, with this counter incremented in disk_insert_zone_wplug() and decremented in disk_remove_zone_wplug(). To be consistent with this fix, we do not need to fill the zone write plug hash table with zone write plugs for zones that are partially written for a device that supports native zone append operations. So modify blk_revalidate_seq_zone() to return early to avoid allocating and inserting a zone write plug for partially written sequential zones if the device natively supports zone append. Reported-by: Jorgen Hansen <Jorgen.Hansen@wdc.com> Fixes: 9b1ce7f0c6f8 ("block: Implement zone append emulation") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Jorgen Hansen <Jorgen.Hansen@wdc.com> Link: https://lore.kernel.org/r/20250214041434.82564-1-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-07objtool: Fix C jump table annotations for ClangArd Biesheuvel
[ Upstream commit 73cfc53cc3b6380eccf013049574485f64cb83ca ] A C jump table (such as the one used by the BPF interpreter) is a const global array of absolute code addresses, and this means that the actual values in the table may not be known until the kernel is booted (e.g., when using KASLR or when the kernel VA space is sized dynamically). When using PIE codegen, the compiler will default to placing such const global objects in .data.rel.ro (which is annotated as writable), rather than .rodata (which is annotated as read-only). As C jump tables are explicitly emitted into .rodata, this used to result in warnings for LoongArch builds (which uses PIE codegen for the entire kernel) like Warning: setting incorrect section attributes for .rodata..c_jump_table due to the fact that the explicitly specified .rodata section inherited the read-write annotation that the compiler uses for such objects when using PIE codegen. This warning was suppressed by explicitly adding the read-only annotation to the __attribute__((section(""))) string, by commit c5b1184decc8 ("compiler.h: specify correct attribute for .rodata..c_jump_table") Unfortunately, this hack does not work on Clang's integrated assembler, which happily interprets the appended section type and permission specifiers as part of the section name, which therefore no longer matches the hard-coded pattern '.rodata..c_jump_table' that objtool expects, causing it to emit a warning kernel/bpf/core.o: warning: objtool: ___bpf_prog_run+0x20: sibling call from callable instruction with modified stack frame Work around this, by emitting C jump tables into .data.rel.ro instead, which is treated as .rodata by the linker script for all builds, not just PIE based ones. Fixes: c5b1184decc8 ("compiler.h: specify correct attribute for .rodata..c_jump_table") Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> # on LoongArch Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250221135704.431269-6-ardb+git@google.com Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07objtool: Remove annotate_{,un}reachable()Peter Zijlstra
[ Upstream commit 06e24745985c8dd0da18337503afcf2f2fdbdff1 ] There are no users of annotate_reachable() left. And the annotate_unreachable() usage in unreachable() is plain wrong; it will hide dangerous fall-through code-gen. Remove both. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20241128094312.235637588@infradead.org Stable-dep-of: 73cfc53cc3b6 ("objtool: Fix C jump table annotations for Clang") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07unreachable: UnifyPeter Zijlstra
[ Upstream commit c837de3810982cd41cd70e5170da1931439f025c ] Since barrier_before_unreachable() is empty for !GCC it is trivial to unify the two definitions. Less is more. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20241128094311.924381359@infradead.org Stable-dep-of: 73cfc53cc3b6 ("objtool: Fix C jump table annotations for Clang") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07tcp: devmem: don't write truncated dmabuf CMSGs to userspaceStanislav Fomichev
[ Upstream commit 18912c520674ec4d920fe3826e7e4fefeecdf5ae ] Currently, we report -ETOOSMALL (err) only on the first iteration (!sent). When we get put_cmsg error after a bunch of successful put_cmsg calls, we don't signal the error at all. This might be confusing on the userspace side which will see truncated CMSGs but no MSG_CTRUNC signal. Consider the following case: - sizeof(struct cmsghdr) = 16 - sizeof(struct dmabuf_cmsg) = 24 - total cmsg size (CMSG_LEN) = 40 (16+24) When calling recvmsg with msg_controllen=60, the userspace will receive two(!) dmabuf_cmsg(s), the first one will be a valid one and the second one will be silently truncated. There is no easy way to discover the truncation besides doing something like "cm->cmsg_len != CMSG_LEN(sizeof(dmabuf_cmsg))". Introduce new put_devmem_cmsg wrapper that reports an error instead of doing the truncation. Mina suggests that it's the intended way this API should work. Note that we might now report MSG_CTRUNC when the users (incorrectly) call us with msg_control == NULL. Fixes: 8f0b3cc9a4c1 ("tcp: RX path for devmem TCP") Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250224174401.3582695-1-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07ASoC: cs35l56: Prevent races when soft-resetting using SPI controlRichard Fitzgerald
[ Upstream commit 769c1b79295c38d60fde4c0a8f5f31e01360c54f ] When SPI is used for control, the driver must hold the SPI bus lock while issuing the sequence of writes to perform a soft reset. >From the time the driver writes the SYSTEM_RESET command until the driver does a write to terminate the reset, there must not be any activity on the SPI bus lines. If there is any SPI activity during the soft-reset, another soft-reset will be triggered. The state of the SPI chip select is irrelevant. A repeated soft-reset does not in itself cause any problems, and it is not an infinite loop. The problem is a race between these resets and the driver polling for boot completion. There is a time window between soft resets where the driver could read HALO_STATE as 2 (fully booted) while the chip is actually soft-resetting. Although this window is small, it is long enough that it is possible to hit it in normal operation. To prevent this race and ensure the chip really is fully booted, the driver calls spi_bus_lock() to prevent other activity while resetting. It then issues the SYSTEM_RESET mailbox command. After allowing sufficient time for reset to take effect, the driver issues a PING mailbox command, which will force completion of the full soft-reset sequence. The SPI bus lock can then be released. The mailbox is checked for any boot or wakeup response from the firmware, before the value in HALO_STATE will be trusted. This does not affect SoundWire or I2C control. Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file") Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20250225131843.113752-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07net: better track kernel sockets lifetimeEric Dumazet
[ Upstream commit 5c70eb5c593d64d93b178905da215a9fd288a4b5 ] While kernel sockets are dismantled during pernet_operations->exit(), their freeing can be delayed by any tx packets still held in qdisc or device queues, due to skb_set_owner_w() prior calls. This then trigger the following warning from ref_tracker_dir_exit() [1] To fix this, make sure that kernel sockets own a reference on net->passive. Add sk_net_refcnt_upgrade() helper, used whenever a kernel socket is converted to a refcounted one. [1] [ 136.263918][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at [ 136.263918][ T35] sk_alloc+0x2b3/0x370 [ 136.263918][ T35] inet6_create+0x6ce/0x10f0 [ 136.263918][ T35] __sock_create+0x4c0/0xa30 [ 136.263918][ T35] inet_ctl_sock_create+0xc2/0x250 [ 136.263918][ T35] igmp6_net_init+0x39/0x390 [ 136.263918][ T35] ops_init+0x31e/0x590 [ 136.263918][ T35] setup_net+0x287/0x9e0 [ 136.263918][ T35] copy_net_ns+0x33f/0x570 [ 136.263918][ T35] create_new_namespaces+0x425/0x7b0 [ 136.263918][ T35] unshare_nsproxy_namespaces+0x124/0x180 [ 136.263918][ T35] ksys_unshare+0x57d/0xa70 [ 136.263918][ T35] __x64_sys_unshare+0x38/0x40 [ 136.263918][ T35] do_syscall_64+0xf3/0x230 [ 136.263918][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 136.263918][ T35] [ 136.343488][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at [ 136.343488][ T35] sk_alloc+0x2b3/0x370 [ 136.343488][ T35] inet6_create+0x6ce/0x10f0 [ 136.343488][ T35] __sock_create+0x4c0/0xa30 [ 136.343488][ T35] inet_ctl_sock_create+0xc2/0x250 [ 136.343488][ T35] ndisc_net_init+0xa7/0x2b0 [ 136.343488][ T35] ops_init+0x31e/0x590 [ 136.343488][ T35] setup_net+0x287/0x9e0 [ 136.343488][ T35] copy_net_ns+0x33f/0x570 [ 136.343488][ T35] create_new_namespaces+0x425/0x7b0 [ 136.343488][ T35] unshare_nsproxy_namespaces+0x124/0x180 [ 136.343488][ T35] ksys_unshare+0x57d/0xa70 [ 136.343488][ T35] __x64_sys_unshare+0x38/0x40 [ 136.343488][ T35] do_syscall_64+0xf3/0x230 [ 136.343488][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 0cafd77dcd03 ("net: add a refcount tracker for kernel sockets") Reported-by: syzbot+30a19e01a97420719891@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/67b72aeb.050a0220.14d86d.0283.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250220131854.4048077-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07net: Add net_passive_inc() and net_passive_dec().Kuniyuki Iwashima
[ Upstream commit e57a6320215c3967f51ab0edeff87db2095440e4 ] net_drop_ns() is NULL when CONFIG_NET_NS is disabled. The next patch introduces a function that increments and decrements net->passive. As a prep, let's rename and export net_free() to net_passive_dec() and add net_passive_inc(). Suggested-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/netdev/CANn89i+oUCt2VGvrbrweniTendZFEh+nwS=uonc004-aPkWy-Q@mail.gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250217191129.19967-2-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 5c70eb5c593d ("net: better track kernel sockets lifetime") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07afs: Give an afs_server object a ref on the afs_cell object it points toDavid Howells
[ Upstream commit 1f0fc3374f3345ff1d150c5c56ac5016e5d3826a ] Give an afs_server object a ref on the afs_cell object it points to so that the cell doesn't get deleted before the server record. Whilst this is circular (cell -> vol -> server_list -> server -> cell), the ref only pins the memory, not the lifetime as that's controlled by the activity counter. When the volume's activity counter reaches 0, it detaches from the cell and discards its server list; when a cell's activity counter reaches 0, it discards its root volume. At that point, the circularity is cut. Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20250218192250.296870-6-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07SUNRPC: Prevent looping due to rpc_signal_task() racesTrond Myklebust
[ Upstream commit 5bbd6e863b15a85221e49b9bdb2d5d8f0bb91f3d ] If rpc_signal_task() is called while a task is in an rpc_call_done() callback function, and the latter calls rpc_restart_call(), the task can end up looping due to the RPC_TASK_SIGNALLED flag being set without the tk_rpc_status being set. Removing the redundant mechanism for signalling the task fixes the looping behaviour. Reported-by: Li Lingfeng <lilingfeng3@huawei.com> Fixes: 39494194f93b ("SUNRPC: Fix races with rpc_killall_tasks()") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-27sched: Compact RSEQ concurrency IDs with reduced threads and affinityMathieu Desnoyers
[ Upstream commit 02d954c0fdf91845169cdacc7405b120f90afe01 ] When a process reduces its number of threads or clears bits in its CPU affinity mask, the mm_cid allocation should eventually converge towards smaller values. However, the change introduced by: commit 7e019dcc470f ("sched: Improve cache locality of RSEQ concurrency IDs for intermittent workloads") adds a per-mm/CPU recent_cid which is never unset unless a thread migrates. This is a tradeoff between: A) Preserving cache locality after a transition from many threads to few threads, or after reducing the hamming weight of the allowed CPU mask. B) Making the mm_cid upper bounds wrt nr threads and allowed CPU mask easy to document and understand. C) Allowing applications to eventually react to mm_cid compaction after reduction of the nr threads or allowed CPU mask, making the tracking of mm_cid compaction easier by shrinking it back towards 0 or not. D) Making sure applications that periodically reduce and then increase again the nr threads or allowed CPU mask still benefit from good cache locality with mm_cid. Introduce the following changes: * After shrinking the number of threads or reducing the number of allowed CPUs, reduce the value of max_nr_cid so expansion of CID allocation will preserve cache locality if the number of threads or allowed CPUs increase again. * Only re-use a recent_cid if it is within the max_nr_cid upper bound, else find the first available CID. Fixes: 7e019dcc470f ("sched: Improve cache locality of RSEQ concurrency IDs for intermittent workloads") Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Gabriele Monaco <gmonaco@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Gabriele Monaco <gmonaco@redhat.com> Link: https://lkml.kernel.org/r/20250210153253.460471-2-gmonaco@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-27net: allow small head cache usage with large MAX_SKB_FRAGS valuesPaolo Abeni
[ Upstream commit 14ad6ed30a10afbe91b0749d6378285f4225d482 ] Sabrina reported the following splat: WARNING: CPU: 0 PID: 1 at net/core/dev.c:6935 netif_napi_add_weight_locked+0x8f2/0xba0 Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc1-net-00092-g011b03359038 #996 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 RIP: 0010:netif_napi_add_weight_locked+0x8f2/0xba0 Code: e8 c3 e6 6a fe 48 83 c4 28 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc c7 44 24 10 ff ff ff ff e9 8f fb ff ff e8 9e e6 6a fe <0f> 0b e9 d3 fe ff ff e8 92 e6 6a fe 48 8b 04 24 be ff ff ff ff 48 RSP: 0000:ffffc9000001fc60 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88806ce48128 RCX: 1ffff11001664b9e RDX: ffff888008f00040 RSI: ffffffff8317ca42 RDI: ffff88800b325cb6 RBP: ffff88800b325c40 R08: 0000000000000001 R09: ffffed100167502c R10: ffff88800b3a8163 R11: 0000000000000000 R12: ffff88800ac1c168 R13: ffff88800ac1c168 R14: ffff88800ac1c168 R15: 0000000000000007 FS: 0000000000000000(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff888008201000 CR3: 0000000004c94001 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> gro_cells_init+0x1ba/0x270 xfrm_input_init+0x4b/0x2a0 xfrm_init+0x38/0x50 ip_rt_init+0x2d7/0x350 ip_init+0xf/0x20 inet_init+0x406/0x590 do_one_initcall+0x9d/0x2e0 do_initcalls+0x23b/0x280 kernel_init_freeable+0x445/0x490 kernel_init+0x20/0x1d0 ret_from_fork+0x46/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> irq event stamp: 584330 hardirqs last enabled at (584338): [<ffffffff8168bf87>] __up_console_sem+0x77/0xb0 hardirqs last disabled at (584345): [<ffffffff8168bf6c>] __up_console_sem+0x5c/0xb0 softirqs last enabled at (583242): [<ffffffff833ee96d>] netlink_insert+0x14d/0x470 softirqs last disabled at (583754): [<ffffffff8317c8cd>] netif_napi_add_weight_locked+0x77d/0xba0 on kernel built with MAX_SKB_FRAGS=45, where SKB_WITH_OVERHEAD(1024) is smaller than GRO_MAX_HEAD. Such built additionally contains the revert of the single page frag cache so that napi_get_frags() ends up using the page frag allocator, triggering the splat. Note that the underlying issue is independent from the mentioned revert; address it ensuring that the small head cache will fit either TCP and GRO allocation and updating napi_alloc_skb() and __netdev_alloc_skb() to select kmalloc() usage for any allocation fitting such cache. Reported-by: Sabrina Dubroca <sd@queasysnail.net> Suggested-by: Eric Dumazet <edumazet@google.com> Fixes: 3948b05950fd ("net: introduce a config option to tweak MAX_SKB_FRAGS") Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-27tcp: drop secpath at the same time as we currently drop dstSabrina Dubroca
[ Upstream commit 9b6412e6979f6f9e0632075f8f008937b5cd4efd ] Xiumei reported hitting the WARN in xfrm6_tunnel_net_exit while running tests that boil down to: - create a pair of netns - run a basic TCP test over ipcomp6 - delete the pair of netns The xfrm_state found on spi_byaddr was not deleted at the time we delete the netns, because we still have a reference on it. This lingering reference comes from a secpath (which holds a ref on the xfrm_state), which is still attached to an skb. This skb is not leaked, it ends up on sk_receive_queue and then gets defer-free'd by skb_attempt_defer_free. The problem happens when we defer freeing an skb (push it on one CPU's defer_list), and don't flush that list before the netns is deleted. In that case, we still have a reference on the xfrm_state that we don't expect at this point. We already drop the skb's dst in the TCP receive path when it's no longer needed, so let's also drop the secpath. At this point, tcp_filter has already called into the LSM hooks that may require the secpath, so it should not be needed anymore. However, in some of those places, the MPTCP extension has just been attached to the skb, so we cannot simply drop all extensions. Fixes: 68822bdf76f1 ("net: generalize skb freeing deferral to per-cpu lists") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/5055ba8f8f72bdcb602faa299faca73c280b7735.1739743613.git.sd@queasysnail.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-27net: Add non-RCU dev_getbyhwaddr() helperBreno Leitao
[ Upstream commit 4b5a28b38c4a0106c64416a1b2042405166b26ce ] Add dedicated helper for finding devices by hardware address when holding rtnl_lock, similar to existing dev_getbyhwaddr_rcu(). This prevents PROVE_LOCKING warnings when rtnl_lock is held but RCU read lock is not. Extract common address comparison logic into dev_addr_cmp(). The context about this change could be found in the following discussion: Link: https://lore.kernel.org/all/20250206-scarlet-ermine-of-improvement-1fcac5@leitao/ Cc: kuniyu@amazon.com Cc: ushankar@purestorage.com Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250218-arm_fix_selftest-v5-1-d3d6892db9e1@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 4eae0ee0f1e6 ("arp: switch to dev_getbyhwaddr() in arp_req_set_public()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-27net: pse-pd: Use power limit at driver side instead of current limitKory Maincent
[ Upstream commit e0a5e2bba38aa61a900934b45d6e846e0a6d7524 ] The regulator framework uses current limits, but the PSE standard and known PSE controllers rely on power limits. Instead of converting current to power within each driver, perform the conversion in the PSE core. This avoids redundancy in driver implementation and aligns better with the standard, simplifying driver development. Remove at the same time the _pse_ethtool_get_status() function which is not needed anymore. Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: f6093c5ec74d ("net: pse-pd: pd692x0: Fix power limit retrieval") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-27PCI: Remove devres from pci_intx()Philipp Stanner
[ Upstream commit dfa2f4d5f9e5d757700cefa8ee480099889f1c69 ] pci_intx() is a hybrid function which can sometimes be managed through devres. This hybrid nature is undesirable. Since all users of pci_intx() have by now been ported either to always-managed pcim_intx() or never-managed pci_intx_unmanaged(), the devres functionality can be removed from pci_intx(). Consequently, pci_intx_unmanaged() is now redundant, because pci_intx() itself is now unmanaged. Remove the devres functionality from pci_intx(). Have all users of pci_intx_unmanaged() call pci_intx(). Remove pci_intx_unmanaged(). Link: https://lore.kernel.org/r/20241209130632.132074-13-pstanner@redhat.com Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: d555ed45a5a1 ("PCI: Restore original INTX_DISABLE bit by pcim_intx()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-27PCI: Export pci_intx_unmanaged() and pcim_intx()Philipp Stanner
[ Upstream commit f546e8033d8f3e45d49622f04ca2fde650b80f6d ] pci_intx() is a hybrid function which sometimes performs devres operations, depending on whether pcim_enable_device() has been used to enable the pci_dev. This sometimes-managed nature of the function is problematic. Notably, it causes the function to allocate under some circumstances which makes it unusable from interrupt context. Export pcim_intx() (which is always managed) and rename __pcim_intx() (which is never managed) to pci_intx_unmanaged() and export it as well. Then all callers of pci_intx() can be ported to the version they need, depending whether they use pci_enable_device() or pcim_enable_device(). Link: https://lore.kernel.org/r/20241209130632.132074-3-pstanner@redhat.com Signed-off-by: Philipp Stanner <pstanner@redhat.com> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Stable-dep-of: d555ed45a5a1 ("PCI: Restore original INTX_DISABLE bit by pcim_intx()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21compiler.h: Move C string helpers into C-only kernel sectionKees Cook
[ Upstream commit cb7380de9e4cbc9a24216b722ec50e092ae83036 ] The C kernel helpers for evaluating C Strings were positioned where they were visible to assembly inclusion, which was not intended. Move them into the kernel and C-only area of the header so future changes won't confuse the assembler. Fixes: d7a516c6eeae ("compiler.h: Fix undefined BUILD_BUG_ON_ZERO()") Fixes: 559048d156ff ("string: Check for "nonstring" attribute on strscpy() arguments") Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21net: add dev_net_rcu() helperEric Dumazet
[ Upstream commit 482ad2a4ace2740ca0ff1cbc8f3c7f862f3ab507 ] dev->nd_net can change, readers should either use rcu_read_lock() or RTNL. We currently use a generic helper, dev_net() with no debugging support. We probably have many hidden bugs. Add dev_net_rcu() helper for callers using rcu_read_lock() protection. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250205155120.1676781-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 71b8471c93fa ("ipv4: use RCU protection in ipv4_default_advmss()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21ipv4: use RCU protection in ip_dst_mtu_maybe_forward()Eric Dumazet
[ Upstream commit 071d8012869b6af352acca346ade13e7be90a49f ] ip_dst_mtu_maybe_forward() must use RCU protection to make sure the net structure it reads does not disappear. Fixes: f87c10a8aa1e8 ("ipv4: introduce ip_dst_mtu_maybe_forward and protect forwarding path against pmtu spoofing") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250205155120.1676781-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21ipv4: add RCU protection to ip4_dst_hoplimit()Eric Dumazet
[ Upstream commit 469308552ca4560176cfc100e7ca84add1bebd7c ] ip4_dst_hoplimit() must use RCU protection to make sure the net structure it reads does not disappear. Fixes: fa50d974d104 ("ipv4: Namespaceify ip_default_ttl sysctl knob") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250205155120.1676781-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21scsi: ufs: core: Introduce a new clock_gating lockAvri Altman
[ Upstream commit 209f4e43b8068c24cde227f464111030430153fa ] Introduce a new clock gating lock to serialize access to some of the clock gating members instead of the host_lock. While at it, simplify the code with the guard() macro and co for automatic cleanup of the new lock. There are some explicit spin_lock_irqsave()/spin_unlock_irqrestore() snaking instances I left behind because I couldn't make heads or tails of it. Additionally, move the trace_ufshcd_clk_gating() call from inside the region protected by the lock as it doesn't needs protection. Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20241124070808.194860-4-avri.altman@wdc.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Stable-dep-of: 839a74b5649c ("scsi: ufs: Fix toggling of clk_gating.state when clock gating is not allowed") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21drm/xe/oa/uapi: Expose an unblock after N reports OA propertyAshutosh Dixit
[ Upstream commit 5637797add2af632a5d037044ab1b0b35643902e ] Expose an "unblock after N reports" OA property, to allow userspace threads to be woken up less frequently. Co-developed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241212224903.1853862-1-ashutosh.dixit@intel.com Stable-dep-of: 990d35edc5d3 ("drm/xe/oa: Set stream->pollin in xe_oa_buffer_check_unlocked") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21drm/xe/oa/uapi: Make OA buffer size configurableSai Teja Pottumuttu
[ Upstream commit 720f63a838731d25ab34c306db59c12834ce09b4 ] Add a new property called DRM_XE_OA_PROPERTY_OA_BUFFER_SIZE to allow OA buffer size to be configurable from userspace. With this OA buffer size can be configured to any power of 2 size between 128KB and 128MB and it would default to 16MB in case the size is not supplied. v2: - Rebase v3: - Add oa buffer size to capabilities [Ashutosh] - Address several nitpicks [Ashutosh] - Fix commit message/subject [Ashutosh] BSpec: 61100, 61228 Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241205041913.883767-2-sai.teja.pottumuttu@intel.com Stable-dep-of: 990d35edc5d3 ("drm/xe/oa: Set stream->pollin in xe_oa_buffer_check_unlocked") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21include: net: add static inline dst_dev_overhead() to dst.hJustin Iurman
[ Upstream commit 0600cf40e9b36fe17f9c9f04d4f9cef249eaa5e7 ] Add static inline dst_dev_overhead() function to include/net/dst.h. This helper function is used by ioam6_iptunnel, rpl_iptunnel and seg6_iptunnel to get the dev's overhead based on a cache entry (dst_entry). If the cache is empty, the default and generic value skb->mac_len is returned. Otherwise, LL_RESERVED_SPACE() over dst's dev is returned. Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Cc: Alexander Lobakin <aleksander.lobakin@intel.com> Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: 92191dd10730 ("net: ipv6: fix dst ref loops in rpl, seg6 and ioam6 lwtunnels") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21cgroup: fix race between fork and cgroup.killShakeel Butt
commit b69bb476dee99d564d65d418e9a20acca6f32c3f upstream. Tejun reported the following race between fork() and cgroup.kill at [1]. Tejun: I was looking at cgroup.kill implementation and wondering whether there could be a race window. So, __cgroup_kill() does the following: k1. Set CGRP_KILL. k2. Iterate tasks and deliver SIGKILL. k3. Clear CGRP_KILL. The copy_process() does the following: c1. Copy a bunch of stuff. c2. Grab siglock. c3. Check fatal_signal_pending(). c4. Commit to forking. c5. Release siglock. c6. Call cgroup_post_fork() which puts the task on the css_set and tests CGRP_KILL. The intention seems to be that either a forking task gets SIGKILL and terminates on c3 or it sees CGRP_KILL on c6 and kills the child. However, I don't see what guarantees that k3 can't happen before c6. ie. After a forking task passes c5, k2 can take place and then before the forking task reaches c6, k3 can happen. Then, nobody would send SIGKILL to the child. What am I missing? This is indeed a race. One way to fix this race is by taking cgroup_threadgroup_rwsem in write mode in __cgroup_kill() as the fork() side takes cgroup_threadgroup_rwsem in read mode from cgroup_can_fork() to cgroup_post_fork(). However that would be heavy handed as this adds one more potential stall scenario for cgroup.kill which is usually called under extreme situation like memory pressure. To fix this race, let's maintain a sequence number per cgroup which gets incremented on __cgroup_kill() call. On the fork() side, the cgroup_can_fork() will cache the sequence number locally and recheck it against the cgroup's sequence number at cgroup_post_fork() site. If the sequence numbers mismatch, it means __cgroup_kill() can been called and we should send SIGKILL to the newly created task. Reported-by: Tejun Heo <tj@kernel.org> Closes: https://lore.kernel.org/all/Z5QHE2Qn-QZ6M-KW@slm.duckdns.org/ [1] Fixes: 661ee6280931 ("cgroup: introduce cgroup.kill") Cc: stable@vger.kernel.org # v5.14+ Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev> Reviewed-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21efi: Avoid cold plugged memory for placing the kernelArd Biesheuvel
commit ba69e0750b0362870294adab09339a0c39c3beaf upstream. UEFI 2.11 introduced EFI_MEMORY_HOT_PLUGGABLE to annotate system memory regions that are 'cold plugged' at boot, i.e., hot pluggable memory that is available from early boot, and described as system RAM by the firmware. Existing loaders and EFI applications running in the boot context will happily use this memory for allocating data structures that cannot be freed or moved at runtime, and this prevents the memory from being unplugged. Going forward, the new EFI_MEMORY_HOT_PLUGGABLE attribute should be tested, and memory annotated as such should be avoided for such allocations. In the EFI stub, there are a couple of occurrences where, instead of the high-level AllocatePages() UEFI boot service, a low-level code sequence is used that traverses the EFI memory map and carves out the requested number of pages from a free region. This is needed, e.g., for allocating as low as possible, or for allocating pages at random. While AllocatePages() should presumably avoid special purpose memory and cold plugged regions, this manual approach needs to incorporate this logic itself, in order to prevent the kernel itself from ending up in a hot unpluggable region, preventing it from being unplugged. So add the EFI_MEMORY_HOTPLUGGABLE macro definition, and check for it where appropriate. Cc: stable@vger.kernel.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21kunit: platform: Resolve 'struct completion' warningBrian Norris
[ Upstream commit 7687c66c18c66d4ccd9949c6f641c0e7b5773483 ] If the <kunit/platform_device.h> header is included in a test without certain other headers, it produces compiler warnings like: In file included from [...] ../include/kunit/platform_device.h:15:57: warning: ‘struct completion’ declared inside parameter list will not be visible outside of this definition or declaration 15 | struct completion *x); | ^~~~~~~~~~ Add a 'struct completion' forward declaration to resolve this. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202412241958.dbAImJsA-lkp@intel.com/ Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: David Gow <davidgow@google.com> Link: https://lore.kernel.org/r/20241213180841.3023843-1-briannorris@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21serial: 8250_pci: Share WCH IDs with parport_serial driverAndy Shevchenko
[ Upstream commit 535a07698b8b3e6f305673102d297262cae2360a ] parport_serial driver uses subset of WCH IDs that are present in 8250_pci. Share them via pci_ids.h and switch parport_serial to use defined constants. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20241204031114.1029882-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21block: cleanup and fix batch completion adding conditionsJens Axboe
[ Upstream commit 1f47ed294a2bd577d5ae43e6e28e1c9a3be4a833 ] The conditions for whether or not a request is allowed adding to a completion batch are a bit hard to read, and they also have a few issues. One is that ioerror may indeed be a random value on passthrough, and it's being checked unconditionally of whether or not the given request is a passthrough request or not. Rewrite the conditions to be separate for easier reading, and only check ioerror for non-passthrough requests. This fixes an issue with bio unmapping on passthrough, where it fails getting added to a batch. This both leads to suboptimal performance, and may trigger a potential schedule-under-atomic condition for polled passthrough IO. Fixes: f794f3351f26 ("block: add support for blk_mq_end_request_batch()") Link: https://lore.kernel.org/r/20575f0a-656e-4bb3-9d82-dec6c7e3a35c@kernel.dk Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21drm: Fix DSC BPP increment decodingImre Deak
[ Upstream commit e00a2e5d485faf53c7a24b9d1b575a642227947f ] Starting with DPCD version 2.0 bits 6:3 of the DP_DSC_BITS_PER_PIXEL_INC DPCD register contains the NativeYCbCr422_MAX_bpp_DELTA field, which can be non-zero as opposed to earlier DPCD versions, hence decoding the bit_per_pixel increment value at bits 2:0 in the same register requires applying a mask, do so. Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Fixes: 0c2287c96521 ("drm/display/dp: Add helper function to get DSC bpp precision") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250212161851.4007005-1-imre.deak@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21thermal/netlink: Prevent userspace segmentation fault by adjusting UAPI headerZhang Rui
[ Upstream commit c195b9c6ab9c383d7aa3f4a65879b3ca90cb378b ] The intel-lpmd tool [1], which uses the THERMAL_GENL_ATTR_CPU_CAPABILITY attribute to receive HFI events from kernel space, encounters a segmentation fault after commit 1773572863c4 ("thermal: netlink: Add the commands and the events for the thresholds"). The issue arises because the THERMAL_GENL_ATTR_CPU_CAPABILITY raw value was changed while intel_lpmd still uses the old value. Although intel_lpmd can be updated to check the THERMAL_GENL_VERSION and use the appropriate THERMAL_GENL_ATTR_CPU_CAPABILITY value, the commit itself is questionable. The commit introduced a new element in the middle of enum thermal_genl_attr, which affects many existing attributes and introduces potential risks and unnecessary maintenance burdens for userspace thermal netlink event users. Solve the issue by moving the newly introduced THERMAL_GENL_ATTR_TZ_PREV_TEMP attribute to the end of the enum thermal_genl_attr. This ensures that all existing thermal generic netlink attributes remain unaffected. Link: https://github.com/intel/intel-lpmd [1] Fixes: 1773572863c4 ("thermal: netlink: Add the commands and the events for the thresholds") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://patch.msgid.link/20250208074907.5679-1-rui.zhang@intel.com [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21vrf: use RCU protection in l3mdev_l3_out()Eric Dumazet
[ Upstream commit 6d0ce46a93135d96b7fa075a94a88fe0da8e8773 ] l3mdev_l3_out() can be called without RCU being held: raw_sendmsg() ip_push_pending_frames() ip_send_skb() ip_local_out() __ip_local_out() l3mdev_ip_out() Add rcu_read_lock() / rcu_read_unlock() pair to avoid a potential UAF. Fixes: a8e3e1a9f020 ("net: l3mdev: Add hook to output path") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250207135841.1948589-7-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-20 08:55:20 +0000