| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 5afedf670caf30a2b5a52da96eb7eac7dee6a9c9 ]
There is an use-after-free problem triggered by following process:
P1(sda) P2(sdb)
echo 0 > /sys/block/sdb/trace/enable
blk_trace_remove_queue
synchronize_rcu
blk_trace_free
relay_close
rcu_read_lock
__blk_add_trace
trace_note_tsk
(Iterate running_trace_list)
relay_close_buf
relay_destroy_buf
kfree(buf)
trace_note(sdb's bt)
relay_reserve
buf->offset <- nullptr deference (use-after-free) !!!
rcu_read_unlock
[ 502.714379] BUG: kernel NULL pointer dereference, address:
0000000000000010
[ 502.715260] #PF: supervisor read access in kernel mode
[ 502.715903] #PF: error_code(0x0000) - not-present page
[ 502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0
[ 502.717252] Oops: 0000 [#1] SMP
[ 502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360
[ 502.732872] Call Trace:
[ 502.733193] __blk_add_trace.cold+0x137/0x1a3
[ 502.733734] blk_add_trace_rq+0x7b/0xd0
[ 502.734207] blk_add_trace_rq_issue+0x54/0xa0
[ 502.734755] blk_mq_start_request+0xde/0x1b0
[ 502.735287] scsi_queue_rq+0x528/0x1140
...
[ 502.742704] sg_new_write.isra.0+0x16e/0x3e0
[ 502.747501] sg_ioctl+0x466/0x1100
Reproduce method:
ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
ioctl(/dev/sda, BLKTRACESTART)
ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
ioctl(/dev/sdb, BLKTRACESTART)
echo 0 > /sys/block/sdb/trace/enable &
// Add delay(mdelay/msleep) before kernel enters blk_trace_free()
ioctl$SG_IO(/dev/sda, SG_IO, ...)
// Enters trace_note_tsk() after blk_trace_free() returned
// Use mdelay in rcu region rather than msleep(which may schedule out)
Remove blk_trace from running_list before calling blk_trace_free() by
sysfs if blk_trace is at Blktrace_running state.
Fixes: c71a896154119f ("blktrace: add ftrace plugin")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20210923134921.109194-1-chengzhihao1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8e242060c6a4947e8ae7d29794af6a581db08841 ]
Since kprobe_events and uprobe_events only check whether the
other same-type probe event has the same name or not, if the
user gives the same name of the existing tracepoint event (or
the other type of probe events), it silently fails to create
the tracefs entry (but registered.) as below.
/sys/kernel/tracing # ls events/task/task_rename
enable filter format hist id trigger
/sys/kernel/tracing # echo p:task/task_rename vfs_read >> kprobe_events
[ 113.048508] Could not create tracefs 'task_rename' directory
/sys/kernel/tracing # cat kprobe_events
p:task/task_rename vfs_read
To fix this issue, check whether the existing events have the
same name or not in trace_probe_register_event_call(). If exists,
it rejects to register the new event.
Link: https://lkml.kernel.org/r/162936876189.187130.17558311387542061930.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5acce0bff2a0420ce87d4591daeb867f47d552c2 ]
The following commands:
# echo 'read_max u64 size;' > synthetic_events
# echo 'hist:keys=common_pid:count=count:onmax($count).trace(read_max,count)' > events/syscalls/sys_enter_read/trigger
Causes:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 4 PID: 1763 Comm: bash Not tainted 5.14.0-rc2-test+ #155
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01
v03.03 07/14/2016
RIP: 0010:strcmp+0xc/0x20
Code: 75 f7 31 c0 0f b6 0c 06 88 0c 02 48 83 c0 01 84 c9 75 f1 4c 89 c0
c3 0f 1f 80 00 00 00 00 31 c0 eb 08 48 83 c0 01 84 d2 74 0f <0f> b6 14 07
3a 14 06 74 ef 19 c0 83 c8 01 c3 31 c0 c3 66 90 48 89
RSP: 0018:ffffb5fdc0963ca8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffffffb3a4e040 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9714c0d0b640 RDI: 0000000000000000
RBP: 0000000000000000 R08: 00000022986b7cde R09: ffffffffb3a4dff8
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9714c50603c8
R13: 0000000000000000 R14: ffff97143fdf9e48 R15: ffff9714c01a2210
FS: 00007f1fa6785740(0000) GS:ffff9714da400000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000002d863004 CR4: 00000000001706e0
Call Trace:
__find_event_file+0x4e/0x80
action_create+0x6b7/0xeb0
? kstrdup+0x44/0x60
event_hist_trigger_func+0x1a07/0x2130
trigger_process_regex+0xbd/0x110
event_trigger_write+0x71/0xd0
vfs_write+0xe9/0x310
ksys_write+0x68/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f1fa6879e87
The problem was the "trace(read_max,count)" where the "count" should be
"$count" as "onmax()" only handles variables (although it really should be
able to figure out that "count" is a field of sys_enter_read). But there's
a path that does not find the variable and ends up passing a NULL for the
event, which ends up getting passed to "strcmp()".
Add a check for NULL to return and error on the command with:
# cat error_log
hist:syscalls:sys_enter_read: error: Couldn't create or find variable
Command: hist:keys=common_pid:count=count:onmax($count).trace(read_max,count)
^
Link: https://lkml.kernel.org/r/20210808003011.4037f8d0@oasis.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 50450603ec9cb tracing: Add 'onmax' hist trigger action support
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a9d10ca4986571bffc19778742d508cc8dd13e02 upstream.
Since the string type can not be the target of the addition / subtraction
operation, it must be rejected. Without this fix, the string type silently
converted to digits.
Link: https://lkml.kernel.org/r/162742654278.290973.1523000673366456634.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 100719dcef447 ("tracing: Add simple expression support to hist triggers")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2c05caa7ba8803209769b9e4fe02c38d77ae88d0 upstream.
When working on my user space applications, I found a bug in the synthetic
event code where the automated synthetic event field was not matching the
event field calculation it was attached to. Looking deeper into it, it was
because the calculation hist_field was not given a size.
The synthetic event fields are matched to their hist_fields either by
having the field have an identical string type, or if that does not match,
then the size and signed values are used to match the fields.
The problem arose when I tried to match a calculation where the fields
were "unsigned int". My tool created a synthetic event of type "u32". But
it failed to match. The string was:
diff=field1-field2:onmatch(event).trace(synth,$diff)
Adding debugging into the kernel, I found that the size of "diff" was 0.
And since it was given "unsigned int" as a type, the histogram fallback
code used size and signed. The signed matched, but the size of u32 (4) did
not match zero, and the event failed to be created.
This can be worse if the field you want to match is not one of the
acceptable fields for a synthetic event. As event fields can have any type
that is supported in Linux, this can cause an issue. For example, if a
type is an enum. Then there's no way to use that with any calculations.
Have the calculation field simply take on the size of what it is
calculating.
Link: https://lkml.kernel.org/r/20210730171951.59c7743f@oasis.local.home
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: 100719dcef447 ("tracing: Add simple expression support to hist triggers")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 67f0d6d9883c13174669f88adac4f0ee656cc16a upstream.
The "rb_per_cpu_empty()" misinterpret the condition (as not-empty) when
"head_page" and "commit_page" of "struct ring_buffer_per_cpu" points to
the same buffer page, whose "buffer_data_page" is empty and "read" field
is non-zero.
An error scenario could be constructed as followed (kernel perspective):
1. All pages in the buffer has been accessed by reader(s) so that all of
them will have non-zero "read" field.
2. Read and clear all buffer pages so that "rb_num_of_entries()" will
return 0 rendering there's no more data to read. It is also required
that the "read_page", "commit_page" and "tail_page" points to the same
page, while "head_page" is the next page of them.
3. Invoke "ring_buffer_lock_reserve()" with large enough "length"
so that it shot pass the end of current tail buffer page. Now the
"head_page", "commit_page" and "tail_page" points to the same page.
4. Discard current event with "ring_buffer_discard_commit()", so that
"head_page", "commit_page" and "tail_page" points to a page whose buffer
data page is now empty.
When the error scenario has been constructed, "tracing_read_pipe" will
be trapped inside a deadloop: "trace_empty()" returns 0 since
"rb_per_cpu_empty()" returns 0 when it hits the CPU containing such
constructed ring buffer. Then "trace_find_next_entry_inc()" always
return NULL since "rb_num_of_entries()" reports there's no more entry
to read. Finally "trace_seq_to_user()" returns "-EBUSY" spanking
"tracing_read_pipe" back to the start of the "waitagain" loop.
I've also written a proof-of-concept script to construct the scenario
and trigger the bug automatically, you can use it to trace and validate
my reasoning above:
https://github.com/aegistudio/RingBufferDetonator.git
Tests has been carried out on linux kernel 5.14-rc2
(2734d6c1b1a089fb593ef6a23d4b70903526fe0c), my fixed version
of kernel (for testing whether my update fixes the bug) and
some older kernels (for range of affected kernels). Test result is
also attached to the proof-of-concept repository.
Link: https://lore.kernel.org/linux-trace-devel/YPaNxsIlb2yjSi5Y@aegistudio/
Link: https://lore.kernel.org/linux-trace-devel/YPgrN85WL9VyrZ55@aegistudio
Cc: stable@vger.kernel.org
Fixes: bf41a158cacba ("ring-buffer: make reentrant")
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Haoran Luo <www@aegistudio.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1e3bac71c5053c99d438771fc9fa5082ae5d90aa upstream.
Currently the histogram logic allows the user to write "cpu" in as an
event field, and it will record the CPU that the event happened on.
The problem with this is that there's a lot of events that have "cpu"
as a real field, and using "cpu" as the CPU it ran on, makes it
impossible to run histograms on the "cpu" field of events.
For example, if I want to have a histogram on the count of the
workqueue_queue_work event on its cpu field, running:
># echo 'hist:keys=cpu' > events/workqueue/workqueue_queue_work/trigger
Gives a misleading and wrong result.
Change the command to "common_cpu" as no event should have "common_*"
fields as that's a reserved name for fields used by all events. And
this makes sense here as common_cpu would be a field used by all events.
Now we can even do:
># echo 'hist:keys=common_cpu,cpu if cpu < 100' > events/workqueue/workqueue_queue_work/trigger
># cat events/workqueue/workqueue_queue_work/hist
# event histogram
#
# trigger info: hist:keys=common_cpu,cpu:vals=hitcount:sort=hitcount:size=2048 if cpu < 100 [active]
#
{ common_cpu: 0, cpu: 2 } hitcount: 1
{ common_cpu: 0, cpu: 4 } hitcount: 1
{ common_cpu: 7, cpu: 7 } hitcount: 1
{ common_cpu: 0, cpu: 7 } hitcount: 1
{ common_cpu: 0, cpu: 1 } hitcount: 1
{ common_cpu: 0, cpu: 6 } hitcount: 2
{ common_cpu: 0, cpu: 5 } hitcount: 2
{ common_cpu: 1, cpu: 1 } hitcount: 4
{ common_cpu: 6, cpu: 6 } hitcount: 4
{ common_cpu: 5, cpu: 5 } hitcount: 14
{ common_cpu: 4, cpu: 4 } hitcount: 26
{ common_cpu: 0, cpu: 0 } hitcount: 39
{ common_cpu: 2, cpu: 2 } hitcount: 184
Now for backward compatibility, I added a trick. If "cpu" is used, and
the field is not found, it will fall back to "common_cpu" and work as
it did before. This way, it will still work for old programs that use
"cpu" to get the actual CPU, but if the event has a "cpu" as a field, it
will get that event's "cpu" field, which is probably what it wants
anyway.
I updated the tracefs/README to include documentation about both the
common_timestamp and the common_cpu. This way, if that text is present in
the README, then an application can know that common_cpu is supported over
just plain "cpu".
Link: https://lkml.kernel.org/r/20210721110053.26b4f641@oasis.local.home
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: 8b7622bf94a44 ("tracing: Add cpu field for hist triggers")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 704adfb5a9978462cd861f170201ae2b5e3d3a80 upstream.
The histogram logic was allowing events with char * pointers to be used as
normal strings. But it was easy to crash the kernel with:
# echo 'hist:keys=filename' > events/syscalls/sys_enter_openat/trigger
And open some files, and boom!
BUG: unable to handle page fault for address: 00007f2ced0c3280
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1173fa067 P4D 1173fa067 PUD 1171b6067 PMD 1171dd067 PTE 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 6 PID: 1810 Comm: cat Not tainted 5.13.0-rc5-test+ #61
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01
v03.03 07/14/2016
RIP: 0010:strlen+0x0/0x20
Code: f6 82 80 2a 0b a9 20 74 11 0f b6 50 01 48 83 c0 01 f6 82 80 2a 0b
a9 20 75 ef c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 <80> 3f 00 74
10 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3
RSP: 0018:ffffbdbf81567b50 EFLAGS: 00010246
RAX: 0000000000000003 RBX: ffff93815cdb3800 RCX: ffff9382401a22d0
RDX: 0000000000000100 RSI: 0000000000000000 RDI: 00007f2ced0c3280
RBP: 0000000000000100 R08: ffff9382409ff074 R09: ffffbdbf81567c98
R10: ffff9382409ff074 R11: 0000000000000000 R12: ffff9382409ff074
R13: 0000000000000001 R14: ffff93815a744f00 R15: 00007f2ced0c3280
FS: 00007f2ced0f8580(0000) GS:ffff93825a800000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2ced0c3280 CR3: 0000000107069005 CR4: 00000000001706e0
Call Trace:
event_hist_trigger+0x463/0x5f0
? find_held_lock+0x32/0x90
? sched_clock_cpu+0xe/0xd0
? lock_release+0x155/0x440
? kernel_init_free_pages+0x6d/0x90
? preempt_count_sub+0x9b/0xd0
? kernel_init_free_pages+0x6d/0x90
? get_page_from_freelist+0x12c4/0x1680
? __rb_reserve_next+0xe5/0x460
? ring_buffer_lock_reserve+0x12a/0x3f0
event_triggers_call+0x52/0xe0
ftrace_syscall_enter+0x264/0x2c0
syscall_trace_enter.constprop.0+0x1ee/0x210
do_syscall_64+0x1c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Where it triggered a fault on strlen(key) where key was the filename.
The reason is that filename is a char * to user space, and the histogram
code just blindly dereferenced it, with obvious bad results.
I originally tried to use strncpy_from_user/kernel_nofault() but found
that there's other places that its dereferenced and not worth the effort.
Just do not allow "char *" to act like strings.
Link: https://lkml.kernel.org/r/20210715000206.025df9d2@rorschach.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Tom Zanussi <zanussi@kernel.org>
Fixes: 79e577cbce4c4 ("tracing: Support string type key properly")
Fixes: 5967bd5c4239 ("tracing: Let filter_assign_type() detect FILTER_PTR_STRING")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4030a6e6a6a4a42ff8c18414c9e0c93e24cc70b8 upstream.
Currently tgid_map is sized at PID_MAX_DEFAULT entries, which means that
on systems where pid_max is configured higher than PID_MAX_DEFAULT the
ftrace record-tgid option doesn't work so well. Any tasks with PIDs
higher than PID_MAX_DEFAULT are simply not recorded in tgid_map, and
don't show up in the saved_tgids file.
In particular since systemd v243 & above configure pid_max to its
highest possible 1<<22 value by default on 64 bit systems this renders
the record-tgids option of little use.
Increase the size of tgid_map to the configured pid_max instead,
allowing it to cover the full range of PIDs up to the maximum value of
PID_MAX_LIMIT if the system is configured that way.
On 64 bit systems with pid_max == PID_MAX_LIMIT this will increase the
size of tgid_map from 256KiB to 16MiB. Whilst this 64x increase in
memory overhead sounds significant 64 bit systems are presumably best
placed to accommodate it, and since tgid_map is only allocated when the
record-tgid option is actually used presumably the user would rather it
spends sufficient memory to actually record the tgids they expect.
The size of tgid_map could also increase for CONFIG_BASE_SMALL=y
configurations, but these seem unlikely to be systems upon which people
are both configuring a large pid_max and running ftrace with record-tgid
anyway.
Of note is that we only allocate tgid_map once, the first time that the
record-tgid option is enabled. Therefore its size is only set once, to
the value of pid_max at the time the record-tgid option is first
enabled. If a user increases pid_max after that point, the saved_tgids
file will not contain entries for any tasks with pids beyond the earlier
value of pid_max.
Link: https://lkml.kernel.org/r/20210701172407.889626-2-paulburton@google.com
Fixes: d914ba37d714 ("tracing: Add support for recording tgid of tasks")
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Burton <paulburton@google.com>
[ Fixed comment coding style ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b81b3e959adb107cd5b36c7dc5ba1364bbd31eb2 upstream.
The tgid_map array records a mapping from pid to tgid, where the index
of an entry within the array is the pid & the value stored at that index
is the tgid.
The saved_tgids_next() function iterates over pointers into the tgid_map
array & dereferences the pointers which results in the tgid, but then it
passes that dereferenced value to trace_find_tgid() which treats it as a
pid & does a further lookup within the tgid_map array. It seems likely
that the intent here was to skip over entries in tgid_map for which the
recorded tgid is zero, but instead we end up skipping over entries for
which the thread group leader hasn't yet had its own tgid recorded in
tgid_map.
A minimal fix would be to remove the call to trace_find_tgid, turning:
if (trace_find_tgid(*ptr))
into:
if (*ptr)
..but it seems like this logic can be much simpler if we simply let
seq_read() iterate over the whole tgid_map array & filter out empty
entries by returning SEQ_SKIP from saved_tgids_show(). Here we take that
approach, removing the incorrect logic here entirely.
Link: https://lkml.kernel.org/r/20210630003406.4013668-1-paulburton@google.com
Fixes: d914ba37d714 ("tracing: Add support for recording tgid of tasks")
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Burton <paulburton@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9913d5745bd720c4266805c8d29952a3702e4eca upstream.
All internal use cases for tracepoint_probe_register() is set to not ever
be called with the same function and data. If it is, it is considered a
bug, as that means the accounting of handling tracepoints is corrupted.
If the function and data for a tracepoint is already registered when
tracepoint_probe_register() is called, it will call WARN_ON_ONCE() and
return with EEXISTS.
The BPF system call can end up calling tracepoint_probe_register() with
the same data, which now means that this can trigger the warning because
of a user space process. As WARN_ON_ONCE() should not be called because
user space called a system call with bad data, there needs to be a way to
register a tracepoint without triggering a warning.
Enter tracepoint_probe_register_may_exist(), which can be called, but will
not cause a WARN_ON() if the probe already exists. It will still error out
with EEXIST, which will then be sent to the user space that performed the
BPF system call.
This keeps the previous testing for issues with other users of the
tracepoint code, while letting BPF call it with duplicated data and not
warn about it.
Link: https://lore.kernel.org/lkml/20210626135845.4080-1-penguin-kernel@I-love.SAKURA.ne.jp/
Link: https://syzkaller.appspot.com/bug?id=41f4318cf01762389f4d1c1c459da4f542fe5153
Cc: stable@vger.kernel.org
Fixes: c4f6699dfcb85 ("bpf: introduce BPF_RAW_TRACEPOINT")
Reported-by: syzbot <syzbot+721aa903751db87aa244@syzkaller.appspotmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot+721aa903751db87aa244@syzkaller.appspotmail.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 26c563731056c3ee66f91106c3078a8c36bb7a9e upstream.
With the addition of simple mathematical operations (plus and minus), the
parsing of the "sym-offset" modifier broke, as it took the '-' part of the
"sym-offset" as a minus, and tried to break it up into a mathematical
operation of "field.sym - offset", in which case it failed to parse
(unless the event had a field called "offset").
Both .sym and .sym-offset modifiers should not be entered into
mathematical calculations anyway. If ".sym-offset" is found in the
modifier, then simply make it not an operation that can be calculated on.
Link: https://lkml.kernel.org/r/20210707110821.188ae255@oasis.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 100719dcef447 ("tracing: Add simple expression support to hist triggers")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 89529d8b8f8daf92d9979382b8d2eb39966846ea upstream.
The trace_clock_global() tries to make sure the events between CPUs is
somewhat in order. A global value is used and updated by the latest read
of a clock. If one CPU is ahead by a little, and is read by another CPU, a
lock is taken, and if the timestamp of the other CPU is behind, it will
simply use the other CPUs timestamp.
The lock is also only taken with a "trylock" due to tracing, and strange
recursions can happen. The lock is not taken at all in NMI context.
In the case where the lock is not able to be taken, the non synced
timestamp is returned. But it will not be less than the saved global
timestamp.
The problem arises because when the time goes "backwards" the time
returned is the saved timestamp plus 1. If the lock is not taken, and the
plus one to the timestamp is returned, there's a small race that can cause
the time to go backwards!
CPU0 CPU1
---- ----
trace_clock_global() {
ts = clock() [ 1000 ]
trylock(clock_lock) [ success ]
global_ts = ts; [ 1000 ]
<interrupted by NMI>
trace_clock_global() {
ts = clock() [ 999 ]
if (ts < global_ts)
ts = global_ts + 1 [ 1001 ]
trylock(clock_lock) [ fail ]
return ts [ 1001]
}
unlock(clock_lock);
return ts; [ 1000 ]
}
trace_clock_global() {
ts = clock() [ 1000 ]
if (ts < global_ts) [ false 1000 == 1000 ]
trylock(clock_lock) [ success ]
global_ts = ts; [ 1000 ]
unlock(clock_lock)
return ts; [ 1000 ]
}
The above case shows to reads of trace_clock_global() on the same CPU, but
the second read returns one less than the first read. That is, time when
backwards, and this is not what is allowed by trace_clock_global().
This was triggered by heavy tracing and the ring buffer checker that tests
for the clock going backwards:
Ring buffer clock went backwards: 20613921464 -> 20613921463
------------[ cut here ]------------
WARNING: CPU: 2 PID: 0 at kernel/trace/ring_buffer.c:3412 check_buffer+0x1b9/0x1c0
Modules linked in:
[..]
[CPU: 2]TIME DOES NOT MATCH expected:20620711698 actual:20620711697 delta:6790234 before:20613921463 after:20613921463
[20613915818] PAGE TIME STAMP
[20613915818] delta:0
[20613915819] delta:1
[20613916035] delta:216
[20613916465] delta:430
[20613916575] delta:110
[20613916749] delta:174
[20613917248] delta:499
[20613917333] delta:85
[20613917775] delta:442
[20613917921] delta:146
[20613918321] delta:400
[20613918568] delta:247
[20613918768] delta:200
[20613919306] delta:538
[20613919353] delta:47
[20613919980] delta:627
[20613920296] delta:316
[20613920571] delta:275
[20613920862] delta:291
[20613921152] delta:290
[20613921464] delta:312
[20613921464] delta:0 TIME EXTEND
[20613921464] delta:0
This happened more than once, and always for an off by one result. It also
started happening after commit aafe104aa9096 was added.
Cc: stable@vger.kernel.org
Fixes: aafe104aa9096 ("tracing: Restructure trace_clock_global() to never block")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4fdd595e4f9a1ff6d93ec702eaecae451cfc6591 upstream.
A while ago, when the "trace" file was opened, tracing was stopped, and
code was added to stop recording the comms to saved_cmdlines, for mapping
of the pids to the task name.
Code has been added that only records the comm if a trace event occurred,
and there's no reason to not trace it if the trace file is opened.
Cc: stable@vger.kernel.org
Fixes: 7ffbd48d5cab2 ("tracing: Cache comms only after an event occurred")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 85550c83da421fb12dc1816c45012e1e638d2b38 upstream.
The saved_cmdlines is used to map pids to the task name, such that the
output of the tracing does not just show pids, but also gives a human
readable name for the task.
If the name is not mapped, the output looks like this:
<...>-1316 [005] ...2 132.044039: ...
Instead of this:
gnome-shell-1316 [005] ...2 132.044039: ...
The names are updated when tracing is running, but are skipped if tracing
is stopped. Unfortunately, this stops the recording of the names if the
top level tracer is stopped, and not if there's other tracers active.
The recording of a name only happens when a new event is written into a
ring buffer, so there is no need to test if tracing is on or not. If
tracing is off, then no event is written and no need to test if tracing is
off or not.
Remove the check, as it hides the names of tasks for events in the
instance buffers.
Cc: stable@vger.kernel.org
Fixes: 7ffbd48d5cab2 ("tracing: Cache comms only after an event occurred")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3e08a9f9760f4a70d633c328a76408e62d6f80a3 upstream.
We've suffered from severe kernel crashes due to memory corruption on
our production environment, like,
Call Trace:
[1640542.554277] general protection fault: 0000 [#1] SMP PTI
[1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G
[1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190
[1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 00010286
[1640542.559587] RAX: 0000000000000000 RBX: 0000000000400200 RCX:
0000000006e931bf
[1640542.560323] RDX: 0000000006e931be RSI: 0000000000400200 RDI:
ffff9a45ff004300
[1640542.560996] RBP: 0000000000400200 R08: 0000000000023420 R09:
0000000000000000
[1640542.561670] R10: 0000000000000000 R11: 0000000000000000 R12:
ffffffff9a20608d
[1640542.562366] R13: ffff9a45ff004300 R14: ffff9a45ff004300 R15:
696c662f65636976
[1640542.563128] FS: 00007f45d7c6f740(0000) GS:ffff9a45ff840000(0000)
knlGS:0000000000000000
[1640542.563937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1640542.564557] CR2: 00007f45d71311a0 CR3: 000000189d63e004 CR4:
00000000003606e0
[1640542.565279] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[1640542.566069] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[1640542.566742] Call Trace:
[1640542.567009] anon_vma_clone+0x5d/0x170
[1640542.567417] __split_vma+0x91/0x1a0
[1640542.567777] do_munmap+0x2c6/0x320
[1640542.568128] vm_munmap+0x54/0x70
[1640542.569990] __x64_sys_munmap+0x22/0x30
[1640542.572005] do_syscall_64+0x5b/0x1b0
[1640542.573724] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[1640542.575642] RIP: 0033:0x7f45d6e61e27
James Wang has reproduced it stably on the latest 4.19 LTS.
After some debugging, we finally proved that it's due to ftrace
buffer out-of-bound access using a debug tool as follows:
[ 86.775200] BUG: Out-of-bounds write at addr 0xffff88aefe8b7000
[ 86.780806] no_context+0xdf/0x3c0
[ 86.784327] __do_page_fault+0x252/0x470
[ 86.788367] do_page_fault+0x32/0x140
[ 86.792145] page_fault+0x1e/0x30
[ 86.795576] strncpy_from_unsafe+0x66/0xb0
[ 86.799789] fetch_memory_string+0x25/0x40
[ 86.804002] fetch_deref_string+0x51/0x60
[ 86.808134] kprobe_trace_func+0x32d/0x3a0
[ 86.812347] kprobe_dispatcher+0x45/0x50
[ 86.816385] kprobe_ftrace_handler+0x90/0xf0
[ 86.820779] ftrace_ops_assist_func+0xa1/0x140
[ 86.825340] 0xffffffffc00750bf
[ 86.828603] do_sys_open+0x5/0x1f0
[ 86.832124] do_syscall_64+0x5b/0x1b0
[ 86.835900] entry_SYSCALL_64_after_hwframe+0x44/0xa9
commit b220c049d519 ("tracing: Check length before giving out
the filter buffer") adds length check to protect trace data
overflow introduced in 0fc1b09ff1ff, seems that this fix can't prevent
overflow entirely, the length check should also take the sizeof
entry->array[0] into account, since this array[0] is filled the
length of trace data and occupy addtional space and risk overflow.
Link: https://lkml.kernel.org/r/20210607125734.1770447-1-liangyan.peng@linux.alibaba.com
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: b220c049d519 ("tracing: Check length before giving out the filter buffer")
Reviewed-by: Xunlei Pang <xlpang@linux.alibaba.com>
Reviewed-by: yinbinbin <yinbinbin@alibabacloud.com>
Reviewed-by: Wetp Zhang <wetp.zy@linux.alibaba.com>
Tested-by: James Wang <jnwang@linux.alibaba.com>
Signed-off-by: Liangyan <liangyan.peng@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6c14133d2d3f768e0a35128faac8aa6ed4815051 upstream.
It was reported that a bug on arm64 caused a bad ip address to be used for
updating into a nop in ftrace_init(), but the error path (rightfully)
returned -EINVAL and not -EFAULT, as the bug caused more than one error to
occur. But because -EINVAL was returned, the ftrace_bug() tried to report
what was at the location of the ip address, and read it directly. This
caused the machine to panic, as the ip was not pointing to a valid memory
address.
Instead, read the ip address with copy_from_kernel_nofault() to safely
access the memory, and if it faults, report that the address faulted,
otherwise report what was in that location.
Link: https://lore.kernel.org/lkml/20210607032329.28671-1-mark-pk.tsai@mediatek.com/
Cc: stable@vger.kernel.org
Fixes: 05736a427f7e1 ("ftrace: warn on failure to disable mcount callers")
Reported-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aafe104aa9096827a429bc1358f8260ee565b7cc upstream.
It was reported that a fix to the ring buffer recursion detection would
cause a hung machine when performing suspend / resume testing. The
following backtrace was extracted from debugging that case:
Call Trace:
trace_clock_global+0x91/0xa0
__rb_reserve_next+0x237/0x460
ring_buffer_lock_reserve+0x12a/0x3f0
trace_buffer_lock_reserve+0x10/0x50
__trace_graph_return+0x1f/0x80
trace_graph_return+0xb7/0xf0
? trace_clock_global+0x91/0xa0
ftrace_return_to_handler+0x8b/0xf0
? pv_hash+0xa0/0xa0
return_to_handler+0x15/0x30
? ftrace_graph_caller+0xa0/0xa0
? trace_clock_global+0x91/0xa0
? __rb_reserve_next+0x237/0x460
? ring_buffer_lock_reserve+0x12a/0x3f0
? trace_event_buffer_lock_reserve+0x3c/0x120
? trace_event_buffer_reserve+0x6b/0xc0
? trace_event_raw_event_device_pm_callback_start+0x125/0x2d0
? dpm_run_callback+0x3b/0xc0
? pm_ops_is_empty+0x50/0x50
? platform_get_irq_byname_optional+0x90/0x90
? trace_device_pm_callback_start+0x82/0xd0
? dpm_run_callback+0x49/0xc0
With the following RIP:
RIP: 0010:native_queued_spin_lock_slowpath+0x69/0x200
Since the fix to the recursion detection would allow a single recursion to
happen while tracing, this lead to the trace_clock_global() taking a spin
lock and then trying to take it again:
ring_buffer_lock_reserve() {
trace_clock_global() {
arch_spin_lock() {
queued_spin_lock_slowpath() {
/* lock taken */
(something else gets traced by function graph tracer)
ring_buffer_lock_reserve() {
trace_clock_global() {
arch_spin_lock() {
queued_spin_lock_slowpath() {
/* DEAD LOCK! */
Tracing should *never* block, as it can lead to strange lockups like the
above.
Restructure the trace_clock_global() code to instead of simply taking a
lock to update the recorded "prev_time" simply use it, as two events
happening on two different CPUs that calls this at the same time, really
doesn't matter which one goes first. Use a trylock to grab the lock for
updating the prev_time, and if it fails, simply try again the next time.
If it failed to be taken, that means something else is already updating
it.
Link: https://lkml.kernel.org/r/20210430121758.650b6e8a@gandalf.local.home
Cc: stable@vger.kernel.org
Tested-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Fixes: b02414c8f045 ("ring-buffer: Fix recursion protection transitions between interrupt context") # started showing the problem
Fixes: 14131f2f98ac3 ("tracing: implement trace_clock_*() APIs") # where the bug happened
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212761
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 785e3c0a3a870e72dc530856136ab4c8dd207128 upstream.
The default max PID is set by PID_MAX_DEFAULT, and the tracing
infrastructure uses this number to map PIDs to the comm names of the
tasks, such output of the trace can show names from the recorded PIDs in
the ring buffer. This mapping is also exported to user space via the
"saved_cmdlines" file in the tracefs directory.
But currently the mapping expects the PIDs to be less than
PID_MAX_DEFAULT, which is the default maximum and not the real maximum.
Recently, systemd will increases the maximum value of a PID on the system,
and when tasks are traced that have a PID higher than PID_MAX_DEFAULT, its
comm is not recorded. This leads to the entire trace to have "<...>" as
the comm name, which is pretty useless.
Instead, keep the array mapping the size of PID_MAX_DEFAULT, but instead
of just mapping the index to the comm, map a mask of the PID
(PID_MAX_DEFAULT - 1) to the comm, and find the full PID from the
map_cmdline_to_pid array (that already exists).
This bug goes back to the beginning of ftrace, but hasn't been an issue
until user space started increasing the maximum value of PIDs.
Link: https://lkml.kernel.org/r/20210427113207.3c601884@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: bc0c38d139ec7 ("ftrace: latency tracer infrastructure")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8c9af478c06bb1ab1422f90d8ecbc53defd44bc3 upstream.
# echo switch_mm:traceoff > /sys/kernel/tracing/set_ftrace_filter
will cause switch_mm to stop tracing by the traceoff command.
# echo -n switch_mm:traceoff > /sys/kernel/tracing/set_ftrace_filter
does nothing.
The reason is that the parsing in the write function only processes
commands if it finished parsing (there is white space written after the
command). That's to handle:
write(fd, "switch_mm:", 10);
write(fd, "traceoff", 8);
cases, where the command is broken over multiple writes.
The problem is if the file descriptor is closed, then the write call is
not processed, and the command needs to be processed in the release code.
The release code can handle matching of functions, but does not handle
commands.
Cc: stable@vger.kernel.org
Fixes: eda1e32855656 ("tracing: handle broken names in ftrace filter")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9deb193af69d3fd6dd8e47f292b67c805a787010 upstream.
Commit cbc3b92ce037 fixed an issue to modify the macros of the stack trace
event so that user space could parse it properly. Originally the stack
trace format to user space showed that the called stack was a dynamic
array. But it is not actually a dynamic array, in the way that other
dynamic event arrays worked, and this broke user space parsing for it. The
update was to make the array look to have 8 entries in it. Helper
functions were added to make it parse it correctly, as the stack was
dynamic, but was determined by the size of the event stored.
Although this fixed user space on how it read the event, it changed the
internal structure used for the stack trace event. It changed the array
size from [0] to [8] (added 8 entries). This increased the size of the
stack trace event by 8 words. The size reserved on the ring buffer was the
size of the stack trace event plus the number of stack entries found in
the stack trace. That commit caused the amount to be 8 more than what was
needed because it did not expect the caller field to have any size. This
produced 8 entries of garbage (and reading random data) from the stack
trace event:
<idle>-0 [002] d... 1976396.837549: <stack trace>
=> trace_event_raw_event_sched_switch
=> __traceiter_sched_switch
=> __schedule
=> schedule_idle
=> do_idle
=> cpu_startup_entry
=> secondary_startup_64_no_verify
=> 0xc8c5e150ffff93de
=> 0xffff93de
=> 0
=> 0
=> 0xc8c5e17800000000
=> 0x1f30affff93de
=> 0x00000004
=> 0x200000000
Instead, subtract the size of the caller field from the size of the event
to make sure that only the amount needed to store the stack trace is
reserved.
Link: https://lore.kernel.org/lkml/your-ad-here.call-01617191565-ext-9692@work.hours/
Cc: stable@vger.kernel.org
Fixes: cbc3b92ce037 ("tracing: Set kernel_stack's caller size properly")
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b220c049d5196dd94d992dd2dc8cba1a5e6123bf upstream.
When filters are used by trace events, a page is allocated on each CPU and
used to copy the trace event fields to this page before writing to the ring
buffer. The reason to use the filter and not write directly into the ring
buffer is because a filter may discard the event and there's more overhead
on discarding from the ring buffer than the extra copy.
The problem here is that there is no check against the size being allocated
when using this page. If an event asks for more than a page size while being
filtered, it will get only a page, leading to the caller writing more that
what was allocated.
Check the length of the request, and if it is more than PAGE_SIZE minus the
header default back to allocating from the ring buffer directly. The ring
buffer may reject the event if its too big anyway, but it wont overflow.
Link: https://lore.kernel.org/ath10k/1612839593-2308-1-git-send-email-wgong@codeaurora.org/
Cc: stable@vger.kernel.org
Fixes: 0fc1b09ff1ff4 ("tracing: Use temp buffer when filtering events")
Reported-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 256cfdd6fdf70c6fcf0f7c8ddb0ebd73ce8f3bc9 upstream.
The file /sys/kernel/tracing/events/enable is used to enable all events by
echoing in "1", or disabling all events when echoing in "0". To know if all
events are enabled, disabled, or some are enabled but not all of them,
cating the file should show either "1" (all enabled), "0" (all disabled), or
"X" (some enabled but not all of them). This works the same as the "enable"
files in the individule system directories (like tracing/events/sched/enable).
But when all events are enabled, the top level "enable" file shows "X". The
reason is that its checking the "ftrace" events, which are special events
that only exist for their format files. These include the format for the
function tracer events, that are enabled when the function tracer is
enabled, but not by the "enable" file. The check includes these events,
which will always be disabled, and even though all true events are enabled,
the top level "enable" file will show "X" instead of "1".
To fix this, have the check test the event's flags to see if it has the
"IGNORE_ENABLE" flag set, and if so, not test it.
Cc: stable@vger.kernel.org
Fixes: 553552ce1796c ("tracing: Combine event filter_active and enable into single flags field")
Reported-by: "Yordan Karadzhov (VMware)" <y.karadz@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 97c753e62e6c31a404183898d950d8c08d752dbd upstream.
Fix kprobe_on_func_entry() returns error code instead of false so that
register_kretprobe() can return an appropriate error code.
append_trace_kprobe() expects the kprobe registration returns -ENOENT
when the target symbol is not found, and it checks whether the target
module is unloaded or not. If the target module doesn't exist, it
defers to probe the target symbol until the module is loaded.
However, since register_kretprobe() returns -EINVAL instead of -ENOENT
in that case, it always fail on putting the kretprobe event on unloaded
modules. e.g.
Kprobe event:
/sys/kernel/debug/tracing # echo p xfs:xfs_end_io >> kprobe_events
[ 16.515574] trace_kprobe: This probe might be able to register after target module is loaded. Continue.
Kretprobe event: (p -> r)
/sys/kernel/debug/tracing # echo r xfs:xfs_end_io >> kprobe_events
sh: write error: Invalid argument
/sys/kernel/debug/tracing # cat error_log
[ 41.122514] trace_kprobe: error: Failed to register probe event
Command: r xfs:xfs_end_io
^
To fix this bug, change kprobe_on_func_entry() to detect symbol lookup
failure and return -ENOENT in that case. Otherwise it returns -EINVAL
or 0 (succeeded, given address is on the entry).
Link: https://lkml.kernel.org/r/161176187132.1067016.8118042342894378981.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 59158ec4aef7 ("tracing/kprobes: Check the probe on unloaded module correctly")
Reported-by: Jianlin Lv <Jianlin.Lv@arm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7e0a9220467dbcfdc5bc62825724f3e52e50ab31 upstream.
On some archs, the idle task can call into cpu_suspend(). The cpu_suspend()
will disable or pause function graph tracing, as there's some paths in
bringing down the CPU that can have issues with its return address being
modified. The task_struct structure has a "tracing_graph_pause" atomic
counter, that when set to something other than zero, the function graph
tracer will not modify the return address.
The problem is that the tracing_graph_pause counter is initialized when the
function graph tracer is enabled. This can corrupt the counter for the idle
task if it is suspended in these architectures.
CPU 1 CPU 2
----- -----
do_idle()
cpu_suspend()
pause_graph_tracing()
task_struct->tracing_graph_pause++ (0 -> 1)
start_graph_tracing()
for_each_online_cpu(cpu) {
ftrace_graph_init_idle_task(cpu)
task-struct->tracing_graph_pause = 0 (1 -> 0)
unpause_graph_tracing()
task_struct->tracing_graph_pause-- (0 -> -1)
The above should have gone from 1 to zero, and enabled function graph
tracing again. But instead, it is set to -1, which keeps it disabled.
There's no reason that the field tracing_graph_pause on the task_struct can
not be initialized at boot up.
Cc: stable@vger.kernel.org
Fixes: 380c4b1411ccd ("tracing/function-graph-tracer: append the tracing_graph_flag")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211339
Reported-by: pierre.gondois@arm.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bbeb97464eefc65f506084fd9f18f21653e01137 upstream.
Below race can come, if trace_open and resize of
cpu buffer is running parallely on different cpus
CPUX CPUY
ring_buffer_resize
atomic_read(&buffer->resize_disabled)
tracing_open
tracing_reset_online_cpus
ring_buffer_reset_cpu
rb_reset_cpu
rb_update_pages
remove/insert pages
resetting pointer
This race can cause data abort or some times infinte loop in
rb_remove_pages and rb_insert_pages while checking pages
for sanity.
Take buffer lock to fix this.
Link: https://lkml.kernel.org/r/1601976833-24377-1-git-send-email-gkohli@codeaurora.org
Cc: stable@vger.kernel.org
Fixes: 83f40318dab00 ("ring-buffer: Make removal of ring buffer pages atomic")
Reported-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7bb83f6fc4ee84e95d0ac0d14452c2619fb3fe70 upstream.
Enable the notrace function check on the architecture which doesn't
support kprobes on ftrace but support dynamic ftrace. This notrace
function check is not only for the kprobes on ftrace but also
sw-breakpoint based kprobes.
Thus there is no reason to limit this check for the arch which
supports kprobes on ftrace.
This also changes the dependency of Kconfig. Because kprobe event
uses the function tracer's address list for identifying notrace
function, if the CONFIG_DYNAMIC_FTRACE=n, it can not check whether
the target function is notrace or not.
Link: https://lkml.kernel.org/r/20210105065730.2634785-1-naveen.n.rao@linux.vnet.ibm.com
Link: https://lkml.kernel.org/r/161007957862.114704.4512260007555399463.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 45408c4f92506 ("tracing: kprobes: Prohibit probing on notrace function")
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit adab66b71abfe206a020f11e561f4df41f0b2aba upstream.
It was believed that metag was the only architecture that required the ring
buffer to keep 8 byte words aligned on 8 byte architectures, and with its
removal, it was assumed that the ring buffer code did not need to handle
this case. It appears that sparc64 also requires this.
The following was reported on a sparc64 boot up:
kernel: futex hash table entries: 65536 (order: 9, 4194304 bytes, linear)
kernel: Running postponed tracer tests:
kernel: Testing tracer function:
kernel: Kernel unaligned access at TPC[552a20] trace_function+0x40/0x140
kernel: Kernel unaligned access at TPC[552a24] trace_function+0x44/0x140
kernel: Kernel unaligned access at TPC[552a20] trace_function+0x40/0x140
kernel: Kernel unaligned access at TPC[552a24] trace_function+0x44/0x140
kernel: Kernel unaligned access at TPC[552a20] trace_function+0x40/0x140
kernel: PASSED
Need to put back the 64BIT aligned code for the ring buffer.
Link: https://lore.kernel.org/r/CADxRZqzXQRYgKc=y-KV=S_yHL+Y8Ay2mh5ezeZUnpRvg+syWKw@mail.gmail.com
Cc: stable@vger.kernel.org
Fixes: 86b3de60a0b6 ("ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS")
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 12cc126df82c96c89706aa207ad27c56f219047c ]
__module_address() needs to be called with preemption disabled or with
module_mutex taken. preempt_disable() is enough for read-only uses, which is
what this fix does. Also, module_put() does internal check for NULL, so drop
it as well.
Fixes: a38d1107f937 ("bpf: support raw tracepoints in modules")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit bcee5278958802b40ee8b26679155a6d9231783e upstream.
When the instances were able to use their own options, the userstacktrace
option was left hardcoded for the top level. This made the instance
userstacktrace option bascially into a nop, and will confuse users that set
it, but nothing happens (I was confused when it happened to me!)
Cc: stable@vger.kernel.org
Fixes: 16270145ce6b ("tracing: Add trace options for core options to instances")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c75b0ff4e4bf7a45b5aef9639799719c28d0073 upstream.
On powerpc, kprobe-direct.tc triggered FTRACE_WARN_ON() in
ftrace_get_addr_new() followed by the below message:
Bad trampoline accounting at: 000000004222522f (wake_up_process+0xc/0x20) (f0000001)
The set of steps leading to this involved:
- modprobe ftrace-direct-too
- enable_probe
- modprobe ftrace-direct
- rmmod ftrace-direct <-- trigger
The problem turned out to be that we were not updating flags in the
ftrace record properly. From the above message about the trampoline
accounting being bad, it can be seen that the ftrace record still has
FTRACE_FL_TRAMP set though ftrace-direct module is going away. This
happens because we are checking if any ftrace_ops has the
FTRACE_FL_TRAMP flag set _before_ updating the filter hash.
The fix for this is to look for any _other_ ftrace_ops that also needs
FTRACE_FL_TRAMP.
Link: https://lkml.kernel.org/r/56c113aa9c3e10c19144a36d9684c7882bf09af5.1606412433.git.naveen.n.rao@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Fixes: a124692b698b0 ("ftrace: Enable trampoline when rec count returns back to one")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 310e3a4b5a4fc718a72201c1e4cf5c64ac6f5442 upstream.
This patch reverts commit 978defee11a5 ("tracing: Do a WARN_ON()
if start_thread() in hwlat is called when thread exists")
.start hook can be legally called several times if according
tracer is stopped
screen window 1
[root@localhost ~]# echo 1 > /sys/kernel/tracing/events/kmem/kfree/enable
[root@localhost ~]# echo 1 > /sys/kernel/tracing/options/pause-on-trace
[root@localhost ~]# less -F /sys/kernel/tracing/trace
screen window 2
[root@localhost ~]# cat /sys/kernel/debug/tracing/tracing_on
0
[root@localhost ~]# echo hwlat > /sys/kernel/debug/tracing/current_tracer
[root@localhost ~]# echo 1 > /sys/kernel/debug/tracing/tracing_on
[root@localhost ~]# cat /sys/kernel/debug/tracing/tracing_on
0
[root@localhost ~]# echo 2 > /sys/kernel/debug/tracing/tracing_on
triggers warning in dmesg:
WARNING: CPU: 3 PID: 1403 at kernel/trace/trace_hwlat.c:371 hwlat_tracer_start+0xc9/0xd0
Link: https://lkml.kernel.org/r/bd4d3e70-400d-9c82-7b73-a2d695e86b58@virtuozzo.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 978defee11a5 ("tracing: Do a WARN_ON() if start_thread() in hwlat is called when thread exists")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 906695e59324635c62b5ae59df111151a546ca66 ]
The array size is FTRACE_KSTACK_NESTING, so the index FTRACE_KSTACK_NESTING
is illegal too. And fix two typos by the way.
Link: https://lkml.kernel.org/r/20201031085714.2147-1-hqjagain@gmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c1acb4ac1a892cf08d27efcb964ad281728b0545 upstream.
The nesting count of trace_printk allows for 4 levels of nesting. The
nesting counter starts at zero and is incremented before being used to
retrieve the current context's buffer. But the index to the buffer uses the
nesting counter after it was incremented, and not its original number,
which in needs to do.
Link: https://lkml.kernel.org/r/20201029161905.4269-1-hqjagain@gmail.com
Cc: stable@vger.kernel.org
Fixes: 3d9622c12c887 ("tracing: Add barrier to trace_printk() buffer nesting modification")
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 726b3d3f141fba6f841d715fc4d8a4a84f02c02a upstream.
When an interrupt or NMI comes in and switches the context, there's a delay
from when the preempt_count() shows the update. As the preempt_count() is
used to detect recursion having each context have its own bit get set when
tracing starts, and if that bit is already set, it is considered a recursion
and the function exits. But if this happens in that section where context
has changed but preempt_count() has not been updated, this will be
incorrectly flagged as a recursion.
To handle this case, create another bit call TRANSITION and test it if the
current context bit is already set. Flag the call as a recursion if the
TRANSITION bit is already set, and if not, set it and continue. The
TRANSITION bit will be cleared normally on the return of the function that
set it, or if the current context bit is clear, set it and clear the
TRANSITION bit to allow for another transition between the current context
and an even higher one.
Cc: stable@vger.kernel.org
Fixes: edc15cafcbfa3 ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ee11b93f95eabdf8198edd4668bf9102e7248270 upstream.
The code that checks recursion will work to only do the recursion check once
if there's nested checks. The top one will do the check, the other nested
checks will see recursion was already checked and return zero for its "bit".
On the return side, nothing will be done if the "bit" is zero.
The problem is that zero is returned for the "good" bit when in NMI context.
This will set the bit for NMIs making it look like *all* NMI tracing is
recursing, and prevent tracing of anything in NMI context!
The simple fix is to return "bit + 1" and subtract that bit on the end to
get the real bit.
Cc: stable@vger.kernel.org
Fixes: edc15cafcbfa3 ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b02414c8f045ab3b9afc816c3735bc98c5c3d262 upstream.
The recursion protection of the ring buffer depends on preempt_count() to be
correct. But it is possible that the ring buffer gets called after an
interrupt comes in but before it updates the preempt_count(). This will
trigger a false positive in the recursion code.
Use the same trick from the ftrace function callback recursion code which
uses a "transition" bit that gets set, to allow for a single recursion for
to handle transitions between contexts.
Cc: stable@vger.kernel.org
Fixes: 567cd4da54ff4 ("ring-buffer: User context bit recursion checking")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a1754b2a97efa644aa6e84d1db5b17c42251483 upstream.
We don't need to check the new buffer size, and the return value
had confused resize_buffer_duplicate_size().
...
ret = ring_buffer_resize(trace_buf->buffer,
per_cpu_ptr(size_buf->data,cpu_id)->entries, cpu_id);
if (ret == 0)
per_cpu_ptr(trace_buf->data, cpu_id)->entries =
per_cpu_ptr(size_buf->data, cpu_id)->entries;
...
Link: https://lkml.kernel.org/r/20201019142242.11560-1-hqjagain@gmail.com
Cc: stable@vger.kernel.org
Fixes: d60da506cbeb3 ("tracing: Add a resize function to make one buffer equivalent to another buffer")
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 795d6379a47bcbb88bd95a69920e4acc52849f88 ]
For 64bit CONFIG_BASE_SMALL=0 systems PID_MAX_LIMIT is set by default to
4194304. During boot the kernel sets a new value based on number of CPUs
but no lower than 32768. It is 1024 per CPU so with 128 CPUs the default
becomes 131072 which needs six digits.
This value can be increased during run time but must not exceed the
initial upper limit.
Systemd sometime after v241 sets it to the upper limit during boot. The
result is that when the pid exceeds five digits, the trace output is a
little hard to read because it is no longer properly padded (same like
on big iron with 98+ CPUs).
Increase the pid padding to seven digits.
Link: https://lkml.kernel.org/r/20200904082331.dcdkrr3bkn3e4qlg@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b40341fad6cc2daa195f8090fd3348f18fff640a upstream.
The first thing that the ftrace function callback helper functions should do
is to check for recursion. Peter Zijlstra found that when
"rcu_is_watching()" had its notrace removed, it caused perf function tracing
to crash. This is because the call of rcu_is_watching() is tested before
function recursion is checked and and if it is traced, it will cause an
infinite recursion loop.
rcu_is_watching() should still stay notrace, but to prevent this should
never had crashed in the first place. The recursion prevention must be the
first thing done in callback functions.
Link: https://lore.kernel.org/r/20200929112541.GM2628@hirez.programming.kicks-ass.net
Cc: stable@vger.kernel.org
Cc: Paul McKenney <paulmck@kernel.org>
Fixes: c68c0fa293417 ("ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 46bbe5c671e06f070428b9be142cc4ee5cedebac upstream.
clang static analyzer reports this problem
trace_events_hist.c:3824:3: warning: Attempt to free
released memory
kfree(hist_data->attrs->var_defs.name[i]);
In parse_var_defs() if there is a problem allocating
var_defs.expr, the earlier var_defs.name is freed.
This free is duplicated by free_var_defs() which frees
the rest of the list.
Because free_var_defs() has to run anyway, remove the
second free fom parse_var_defs().
Link: https://lkml.kernel.org/r/20200907135845.15804-1-trix@redhat.com
Cc: stable@vger.kernel.org
Fixes: 30350d65ac56 ("tracing: Add variable support to hist triggers")
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 73ac74c7d489756d2313219a108809921dbfaea1 ]
Switch order so that locking state is consistent even
if the IRQ tracer calls into lockdep again.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf2cbe044da275021b2de5917240411a19e5c50d ]
Clang warns:
../kernel/trace/trace.c:9335:33: warning: array comparison always
evaluates to true [-Wtautological-compare]
if (__stop___trace_bprintk_fmt != __start___trace_bprintk_fmt)
^
1 warning generated.
These are not true arrays, they are linker defined symbols, which are
just addresses. Using the address of operator silences the warning and
does not change the runtime result of the check (tested with some print
statements compiled in with clang + ld.lld and gcc + ld.bfd in QEMU).
Link: http://lkml.kernel.org/r/20200220051011.26113-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/893
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cbc3b92ce037f5e7536f6db157d185cd8b8f615c ]
I noticed when trying to use the trace-cmd python interface that reading the raw
buffer wasn't working for kernel_stack events. This is because it uses a
stubbed version of __dynamic_array that doesn't do the __data_loc trick and
encode the length of the array into the field. Instead it just shows up as a
size of 0. So change this to __array and set the len to FTRACE_STACK_ENTRIES
since this is what we actually do in practice and matches how user_stack_trace
works.
Link: http://lkml.kernel.org/r/1411589652-1318-1-git-send-email-jbacik@fb.com
Signed-off-by: Josef Bacik <jbacik@fb.com>
[ Pulled from the archeological digging of my INBOX ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 953ae45a0c25e09428d4a03d7654f97ab8a36647 ]
As part of commit f45d1225adb0 ("tracing: Kernel access to Ftrace
instances") we exported certain functions. Here, we are adding some additional
NULL checks to ensure safe usage by users of these APIs.
Link: http://lkml.kernel.org/r/1565805327-579-4-git-send-email-divya.indi@oracle.com
Signed-off-by: Divya Indi <divya.indi@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e585e6469d6f476b82aa148dc44aaf7ae269a4e2 ]
A trace array can be destroyed from userspace or kernel. Verify if the
trace array exists before proceeding to destroy/remove it.
Link: http://lkml.kernel.org/r/1565805327-579-3-git-send-email-divya.indi@oracle.com
Reviewed-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Divya Indi <divya.indi@oracle.com>
[ Removed unneeded braces ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b431ef837e3374da0db8ff6683170359aaa0859c ]
We make an assumption that a debugfs directory exists, but since
this can fail ensure it exists before allowing blktrace setup to
complete. Otherwise we end up stuffing blktrace files on the debugfs
root directory. In the worst case scenario this *in theory* can create
an eventual panic *iff* in the future a similarly named file is created
prior on the debugfs root directory. This theoretical crash can happen
due to a recursive removal followed by a specific dentry removal.
This doesn't fix any known crash, however I have seen the files
go into the main debugfs root directory in cases where the debugfs
directory was not created due to other internal bugs with blktrace
now fixed.
blktrace is also completely useless without this directory, so
this ensures to userspace we only setup blktrace if the kernel
can stuff files where they are supposed to go into.
debugfs directory creations typically aren't checked for, and we have
maintainers doing sweep removals of these checks, but since we need this
check to ensure proper userspace blktrace functionality we make sure
to annotate the justification for the check.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 7ef282e05132d56b6f6b71e3873f317664bea78b upstream.
If a process has the trace_pipe open on a trace_array, the current tracer
for that trace array should not be changed. This was original enforced by a
global lock, but when instances were introduced, it was moved to the
current_trace. But this structure is shared by all instances, and a
trace_pipe is for a single instance. There's no reason that a process that
has trace_pipe open on one instance should prevent another instance from
changing its current tracer. Move the reference counter to the trace_array
instead.
This is marked as "Fixes" but is more of a clean up than a true fix.
Backport if you want, but its not critical.
Fixes: cf6ab6d9143b1 ("tracing: Add ref count to tracer for when they are being read by pipe")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[Resolved conflict in __remove_instance()]
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit afcab636657421f7ebfa0783a91f90256bba0091 upstream.
On exit, if a process is preempted after the trace_sched_process_exit()
tracepoint but before the process is done exiting, then when it gets
scheduled in, the function tracers will not filter it properly against the
function tracing pid filters.
That is because the function tracing pid filters hooks to the
sched_process_exit() tracepoint to remove the exiting task's pid from the
filter list. Because the filtering happens at the sched_switch tracepoint,
when the exiting task schedules back in to finish up the exit, it will no
longer be in the function pid filtering tables.
This was noticeable in the notrace self tests on a preemptable kernel, as
the tests would fail as it exits and preempted after being taken off the
notrace filter table and on scheduling back in it would not be in the
notrace list, and then the ending of the exit function would trace. The test
detected this and would fail.
Cc: stable@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 1e10486ffee0a ("ftrace: Add 'function-fork' trace option")
Fixes: c37775d57830a ("tracing: Add infrastructure to allow set_event_pid to follow children"
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 96b4833b6827a62c295b149213c68b559514c929 upstream.
In calculation of the cpu mask for the hwlat kernel thread, the wrong
cpu mask is used instead of the tracing_cpumask, this causes the
tracing/tracing_cpumask useless for hwlat tracer. Fixes it.
Link: https://lkml.kernel.org/r/20200730082318.42584-2-haokexin@gmail.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 0330f7aa8ee6 ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
