| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 156ec6f42b8d300dbbf382738ff35c8bad8f4c3a ]
Hung tasks and RCU stall cases were reported on systems which were not
100% busy. Investigation of such unexpected cases (no sign of potential
starvation caused by tasks hogging the system) pointed out that the
periodic sched tick timer wasn't serviced anymore after a certain point
and that caused all machinery that depends on it (timers, RCU, etc.) to
stop working as well. This issues was however only reproducible if
HRTICK was enabled.
Looking at core dumps it was found that the rbtree of the hrtimer base
used also for the hrtick was corrupted (i.e. next as seen from the base
root and actual leftmost obtained by traversing the tree are different).
Same base is also used for periodic tick hrtimer, which might get "lost"
if the rbtree gets corrupted.
Much alike what described in commit 1f71addd34f4c ("tick/sched: Do not
mess with an enqueued hrtimer") there is a race window between
hrtimer_set_expires() in hrtick_start and hrtimer_start_expires() in
__hrtick_restart() in which the former might be operating on an already
queued hrtick hrtimer, which might lead to corruption of the base.
Use hrtick_start() (which removes the timer before enqueuing it back) to
ensure hrtick hrtimer reprogramming is entirely guarded by the base
lock, so that no race conditions can occur.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210208073554.14629-2-juri.lelli@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 1b7af295541d75535374325fd617944534853919 upstream.
The try_invoke_on_locked_down_task() function currently requires
that interrupts be enabled, but it is called with interrupts
disabled from rcu_print_task_stall(), resulting in an "IRQs not
enabled as expected" diagnostic. This commit therefore updates
try_invoke_on_locked_down_task() to use raw_spin_lock_irqsave() instead
of raw_spin_lock_irq(), thus allowing use from either context.
Link: https://lore.kernel.org/lkml/000000000000903d5805ab908fc4@google.com/
Link: https://lore.kernel.org/lkml/20200928075729.GC2611@hirez.programming.kicks-ass.net/
Reported-by: syzbot+cb3b69ae80afd6535b0e@syzkaller.appspotmail.com
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d54ce6158e354f5358a547b96299ecd7f3725393 upstream.
Currently breakpoints in kernel .init.text section are not handled
correctly while allowing to remove them even after corresponding pages
have been freed.
Fix it via killing .init.text section breakpoints just prior to initmem
pages being freed.
Doug: "HW breakpoints aren't handled by this patch but it's probably
not such a big deal".
Link: https://lkml.kernel.org/r/20210224081652.587785-1-sumit.garg@linaro.org
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Suggested-by: Doug Anderson <dianders@chromium.org>
Acked-by: Doug Anderson <dianders@chromium.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bfe3911a91047557eb0e620f95a370aee6a248c7 upstream.
Userspace has discovered the functionality offered by SYS_kcmp and has
started to depend upon it. In particular, Mesa uses SYS_kcmp for
os_same_file_description() in order to identify when two fd (e.g. device
or dmabuf) point to the same struct file. Since they depend on it for
core functionality, lift SYS_kcmp out of the non-default
CONFIG_CHECKPOINT_RESTORE into the selectable syscall category.
Rasmus Villemoes also pointed out that systemd uses SYS_kcmp to
deduplicate the per-service file descriptor store.
Note that some distributions such as Ubuntu are already enabling
CHECKPOINT_RESTORE in their configs and so, by extension, SYS_kcmp.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3046
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> # DRM depends on kcmp
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> # systemd uses kcmp
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205220012.1983-1-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8a8109f303e25a27f92c1d8edd67d7cbbc60a4eb upstream.
printk_safe_flush_on_panic() caused the following deadlock on our
server:
CPU0: CPU1:
panic rcu_dump_cpu_stacks
kdump_nmi_shootdown_cpus nmi_trigger_cpumask_backtrace
register_nmi_handler(crash_nmi_callback) printk_safe_flush
__printk_safe_flush
raw_spin_lock_irqsave(&read_lock)
// send NMI to other processors
apic_send_IPI_allbutself(NMI_VECTOR)
// NMI interrupt, dead loop
crash_nmi_callback
printk_safe_flush_on_panic
printk_safe_flush
__printk_safe_flush
// deadlock
raw_spin_lock_irqsave(&read_lock)
DEADLOCK: read_lock is taken on CPU1 and will never get released.
It happens when panic() stops a CPU by NMI while it has been in
the middle of printk_safe_flush().
Handle the lock the same way as logbuf_lock. The printk_safe buffers
are flushed only when both locks can be safely taken. It can avoid
the deadlock _in this particular case_ at expense of losing contents
of printk_safe buffers.
Note: It would actually be safe to re-init the locks when all CPUs were
stopped by NMI. But it would require passing this information
from arch-specific code. It is not worth the complexity.
Especially because logbuf_lock and printk_safe buffers have been
obsoleted by the lockless ring buffer.
Fixes: cf9b1106c81c ("printk/nmi: flush NMI messages on the system panic")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: <stable@vger.kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210210034823.64867-1-songmuchun@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ebfac7b778fac8b0e8e92ec91d0b055f046b4604 upstream.
clang-12 -fno-pic (since
https://github.com/llvm/llvm-project/commit/a084c0388e2a59b9556f2de0083333232da3f1d6)
can emit `call __stack_chk_fail@PLT` instead of `call __stack_chk_fail`
on x86. The two forms should have identical behaviors on x86-64 but the
former causes GNU as<2.37 to produce an unreferenced undefined symbol
_GLOBAL_OFFSET_TABLE_.
(On x86-32, there is an R_386_PC32 vs R_386_PLT32 difference but the
linker behavior is identical as far as Linux kernel is concerned.)
Simply ignore _GLOBAL_OFFSET_TABLE_ for now, like what
scripts/mod/modpost.c:ignore_undef_symbol does. This also fixes the
problem for gcc/clang -fpie and -fpic, which may emit `call foo@PLT` for
external function calls on x86.
Note: ld -z defs and dynamic loaders do not error for unreferenced
undefined symbols so the module loader is reading too much. If we ever
need to ignore more symbols, the code should be refactored to ignore
unreferenced symbols.
Cc: <stable@vger.kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1250
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27178
Reported-by: Marco Elver <elver@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Marco Elver <elver@google.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c85c9a2c6e368dc94907e63babb18a9788e5c9b6 upstream.
Commit 36dadef23fcc ("kprobes: Init kprobes in early_initcall")
moved the kprobe setup in early_initcall(), which includes kprobe
jump optimization.
The kprobes jump optimizer involves synchronize_rcu_tasks() which
depends on the ksoftirqd and rcu_spawn_tasks_*(). However, since
those are setup in core_initcall(), kprobes jump optimizer can not
run at the early_initcall().
To avoid this issue, make the kprobe optimization disabled in the
early_initcall() and enables it in subsys_initcall().
Note that non-optimized kprobes is still available after
early_initcall(). Only jump optimization is delayed.
Link: https://lkml.kernel.org/r/161365856280.719838.12423085451287256713.stgit@devnote2
Fixes: 36dadef23fcc ("kprobes: Init kprobes in early_initcall")
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: RCU <rcu@vger.kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Theodore Y . Ts'o" <tytso@mit.edu>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: stable@vger.kernel.org
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reported-by: Uladzislau Rezki <urezki@gmail.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 43789ef3f7d61aa7bed0cb2764e588fc990c30ef upstream.
Entering RCU idle mode may cause a deferred wake up of an RCU NOCB_GP
kthread (rcuog) to be serviced.
Usually a local wake up happening while running the idle task is handled
in one of the need_resched() checks carefully placed within the idle
loop that can break to the scheduler.
Unfortunately the call to rcu_idle_enter() is already beyond the last
generic need_resched() check and we may halt the CPU with a resched
request unhandled, leaving the task hanging.
Fix this with splitting the rcuog wakeup handling from rcu_idle_enter()
and place it before the last generic need_resched() check in the idle
loop. It is then assumed that no call to call_rcu() will be performed
after that in the idle loop until the CPU is put in low power mode.
Fixes: 96d3fd0d315a (rcu: Break call_rcu() deadlock involving scheduler and perf)
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210131230548.32970-3-frederic@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 54b7429efffc99e845ba9381bee3244f012a06c2 upstream.
Deferred wakeup of rcuog kthreads upon RCU idle mode entry is going to
be handled differently whether initiated by idle, user or guest. Prepare
with pulling that control up to rcu_eqs_enter() callers.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210131230548.32970-2-frederic@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 04b38d012556199ba4c31195940160e0c44c64f0 upstream.
We don't actually care about the value, since the kernel will panic
before that; but a value should nonetheless be returned, otherwise the
compiler will complain.
Fixes: 8112c4f140fa ("seccomp: remove 2-phase API")
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210111172839.640914-1-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 13791c80b0cdf54d92fc54221cdf490683b109de ]
If message sizes average larger than expected (more than 32
characters), the data_ring will wrap before the desc_ring. Once the
data_ring wraps, it will start invalidating descriptors. These
invalid descriptors hang around until they are eventually recycled
when the desc_ring wraps. Readers do not care about invalid
descriptors, but they still need to iterate past them. If the
average message size is much larger than 32 characters, then there
will be many invalid descriptors preceding the valid descriptors.
The function prb_first_valid_seq() always begins at the oldest
descriptor and searches for the first valid descriptor. This can
be rather expensive for the above scenario. And, in fact, because
of its heavy usage in /dev/kmsg, there have been reports of long
delays and even RCU stalls.
For code that does not need to search from the oldest record,
replace prb_first_valid_seq() usage with prb_read_valid_*()
functions, which provide a start sequence number to search from.
Fixes: 896fbe20b4e2333fb55 ("printk: use the lockless ringbuffer")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: J. Avila <elavila@google.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210211173152.1629-1-john.ogness@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit befe6d946551d65cddbd32b9cb0170b0249fd5ed ]
The list of tracepoint callbacks is managed by an array that is protected
by RCU. To update this array, a new array is allocated, the updates are
copied over to the new array, and then the list of functions for the
tracepoint is switched over to the new array. After a completion of an RCU
grace period, the old array is freed.
This process happens for both adding a callback as well as removing one.
But on removing a callback, if the new array fails to be allocated, the
callback is not removed, and may be used after it is freed by the clients
of the tracepoint.
There's really no reason to fail if the allocation for a new array fails
when removing a function. Instead, the function can simply be replaced by a
stub function that could be cleaned up on the next modification of the
array. That is, instead of calling the function registered to the
tracepoint, it would call a stub function in its place.
Link: https://lore.kernel.org/r/20201115055256.65625-1-mmullins@mmlx.us
Link: https://lore.kernel.org/r/20201116175107.02db396d@gandalf.local.home
Link: https://lore.kernel.org/r/20201117211836.54acaef2@oasis.local.home
Link: https://lkml.kernel.org/r/20201118093405.7a6d2290@gandalf.local.home
[ Note, this version does use undefined compiler behavior (assuming that
a stub function with no parameters or return, can be called by a location
that thinks it has parameters but still no return value. Static calls
do the same thing, so this trick is not without precedent.
There's another solution that uses RCU tricks and is more complex, but
can be an alternative if this solution becomes an issue.
Link: https://lore.kernel.org/lkml/20210127170721.58bce7cc@gandalf.local.home/
]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: netdev <netdev@vger.kernel.org>
Cc: bpf <bpf@vger.kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Florian Weimer <fw@deneb.enyo.de>
Fixes: 97e1c18e8d17b ("tracing: Kernel Tracepoints")
Reported-by: syzbot+83aa762ef23b6f0d1991@syzkaller.appspotmail.com
Reported-by: syzbot+d29e58bb557324e55e5e@syzkaller.appspotmail.com
Reported-by: Matt Mullins <mmullins@mmlx.us>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tested-by: Matt Mullins <mmullins@mmlx.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 66040b2d5d41f85cb1a752a75260595344c5ec3b ]
send_call_function_single_ipi() may wake an idle CPU without sending an
IPI. The woken up CPU will process the SMP-functions in
flush_smp_call_function_from_idle(). Any raised softirq from within the
SMP-function call will not be processed.
Should the CPU have no tasks assigned, then it will go back to idle with
pending softirqs and the NOHZ will rightfully complain.
Process pending softirqs on return from flush_smp_call_function_queue().
Fixes: b2a02fc43a1f4 ("smp: Optimize send_call_function_single_ipi()")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210123201027.3262800-2-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f31e3386a4e92ba6eda7328cb508462956c94c64 ]
IMA allocates kernel virtual memory to carry forward the measurement
list, from the current kernel to the next kernel on kexec system call,
in ima_add_kexec_buffer() function. This buffer is not freed before
completing the kexec system call resulting in memory leak.
Add ima_buffer field in "struct kimage" to store the virtual address
of the buffer allocated for the IMA measurement list.
Free the memory allocated for the IMA measurement list in
kimage_file_post_load_cleanup() function.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Fixes: 7b8589cc29e7 ("ima: on soft reboot, save the measurement list")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7f82e631d236cafd28518b998c6d4d8dc2ef68f6 ]
Commit f6f48e180404 ("lockdep: Teach lockdep about "USED" <- "IN-NMI"
inversions") overlooked that print_usage_bug() releases the graph_lock
and called it without the graph lock held.
Fixes: f6f48e180404 ("lockdep: Teach lockdep about "USED" <- "IN-NMI" inversions")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/YBfkuyIfB1+VRxXP@hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ae78eec8aa64e645866e75005162603a77a0f49 ]
If the task is pinned to a cpu, setting the misfit status means that
we'll unnecessarily continuously attempt to migrate the task but fail.
This continuous failure will cause the balance_interval to increase to
a high value, and eventually cause unnecessary significant delays in
balancing the system when real imbalance happens.
Caught while testing uclamp where rt-app calibration loop was pinned to
cpu 0, shortly after which we spawn another task with high util_clamp
value. The task was failing to migrate after over 40ms of runtime due to
balance_interval unnecessary expanded to a very high value from the
calibration loop.
Not done here, but it could be useful to extend the check for pinning to
verify that the affinity of the task has a cpu that fits. We could end
up in a similar situation otherwise.
Fixes: 3b1baa6496e6 ("sched/fair: Add 'group_misfit_task' load-balance type")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Acked-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210119120755.2425264-1-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8c1f560c1ea3f19e22ba356f62680d9d449c9ec2 ]
CPU (root cfs_rq) estimated utilization (util_est) is currently used in
dequeue_task_fair() to drive frequency selection before it is updated.
with:
CPU_util : rq->cfs.avg.util_avg
CPU_util_est : rq->cfs.avg.util_est
CPU_utilization : max(CPU_util, CPU_util_est)
task_util : p->se.avg.util_avg
task_util_est : p->se.avg.util_est
dequeue_task_fair():
/* (1) CPU_util and task_util update + inform schedutil about
CPU_utilization changes */
for_each_sched_entity() /* 2 loops */
(dequeue_entity() ->) update_load_avg() -> cfs_rq_util_change()
-> cpufreq_update_util() ->...-> sugov_update_[shared\|single]
-> sugov_get_util() -> cpu_util_cfs()
/* (2) CPU_util_est and task_util_est update */
util_est_dequeue()
cpu_util_cfs() uses CPU_utilization which could lead to a false (too
high) utilization value for schedutil in task ramp-down or ramp-up
scenarios during task dequeue.
To mitigate the issue split the util_est update (2) into:
(A) CPU_util_est update in util_est_dequeue()
(B) task_util_est update in util_est_update()
Place (A) before (1) and keep (B) where (2) is. The latter is necessary
since (B) relies on task_util update in (1).
Fixes: 7f65ea42eb00 ("sched/fair: Add util_est on top of PELT")
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/1608283672-18240-1-git-send-email-xuewen.yan94@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 71a076f4a61a6c779794ad286f356b39725edc3b ]
Rewrite kcsan_prandom_u32_max() to not depend on code that might be
instrumented, removing any dependency on lib/random32.c. The rewrite
implements a simple linear congruential generator, that is sufficient
for our purposes (for udelay() and skip_watch counter randomness).
The initial motivation for this was to allow enabling KCSAN for
kernel/sched (remove KCSAN_SANITIZE := n from kernel/sched/Makefile),
with CONFIG_DEBUG_PREEMPT=y. Without this change, we could observe
recursion:
check_access() [via instrumentation]
kcsan_setup_watchpoint()
reset_kcsan_skip()
kcsan_prandom_u32_max()
get_cpu_var()
preempt_disable()
preempt_count_add() [in kernel/sched/core.c]
check_access() [via instrumentation]
Note, while this currently does not affect an unmodified kernel, it'd be
good to keep a KCSAN kernel working when KCSAN_SANITIZE := n is removed
from kernel/sched/Makefile to permit testing scheduler code with KCSAN
if desired.
Fixes: cd290ec24633 ("kcsan: Use tracing-safe version of prandom")
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45159b27637b0fef6d5ddb86fc7c46b13c77960f ]
test_global_func4 fails on s390 as reported by Yauheni in [1].
The immediate problem is that the zext code includes the instruction,
whose result needs to be zero-extended, into the zero-extension
patchlet, and if this instruction happens to be a branch, then its
delta is not adjusted. As a result, the verifier rejects the program
later.
However, according to [2], as far as the verifier's algorithm is
concerned and as specified by the insn_no_def() function, branching
insns do not define anything. This includes call insns, even though
one might argue that they define %r0.
This means that the real problem is that zero extension kicks in at
all. This happens because clear_caller_saved_regs() sets BPF_REG_0's
subreg_def after global function calls. This can be fixed in many
ways; this patch mimics what helper function call handling already
does.
[1] https://lore.kernel.org/bpf/20200903140542.156624-1-yauheni.kaliuta@redhat.com/
[2] https://lore.kernel.org/bpf/CAADnVQ+2RPKcftZw8d+B1UwB35cpBhpF5u3OocNh90D9pETPwg@mail.gmail.com/
Fixes: 51c39bb1d5d1 ("bpf: Introduce function-by-function verification")
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210212040408.90109-1-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d4553b69fb335496c597c31590e982485ebe071 ]
The devmap bulk queue is allocated with GFP_ATOMIC and the allocation
may fail if there is no available space in existing percpu pool.
Since commit 75ccae62cb8d42 ("xdp: Move devmap bulk queue into struct net_device")
moved the bulk queue allocation to NETDEV_REGISTER callback, whose context
is allowed to sleep, use GFP_KERNEL instead of GFP_ATOMIC to let percpu
allocator extend the pool when needed and avoid possible failure of netdev
registration.
As the required alignment is natural, we can simply use alloc_percpu().
Fixes: 75ccae62cb8d42 ("xdp: Move devmap bulk queue into struct net_device")
Signed-off-by: Jun'ichi Nomura <junichi.nomura@nec.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210209082451.GA44021@jeru.linux.bs1.fc.nec.co.jp
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 17d8beda277a36203585943e70c7909b60775fd5 ]
Commit 15d83c4d7cef ("bpf: Allow loading of a bpf_iter program")
cached btf_id in struct bpf_iter_target_info so later on
if it can be checked cheaply compared to checking registered names.
syzbot found a bug that uninitialized value may occur to
bpf_iter_target_info->btf_id. This is because we allocated
bpf_iter_target_info structure with kmalloc and never initialized
field btf_id afterwards. This uninitialized btf_id is typically
compared to a u32 bpf program func proto btf_id, and the chance
of being equal is extremely slim.
This patch fixed the issue by using kzalloc which will also
prevent future likely instances due to adding new fields.
Fixes: 15d83c4d7cef ("bpf: Allow loading of a bpf_iter program")
Reported-by: syzbot+580f4f2a272e452d55cb@syzkaller.appspotmail.com
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210212005926.2875002-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6df8fb83301d68ea0a0c0e1cbcc790fcc333ed12 ]
For double-checked locking in bpf_common_lru_push_free(), node->type is
read outside the critical section and then re-checked under the lock.
However, concurrent writes to node->type result in data races.
For example, the following concurrent access was observed by KCSAN:
write to 0xffff88801521bc22 of 1 bytes by task 10038 on cpu 1:
__bpf_lru_node_move_in kernel/bpf/bpf_lru_list.c:91
__local_list_flush kernel/bpf/bpf_lru_list.c:298
...
read to 0xffff88801521bc22 of 1 bytes by task 10043 on cpu 0:
bpf_common_lru_push_free kernel/bpf/bpf_lru_list.c:507
bpf_lru_push_free kernel/bpf/bpf_lru_list.c:555
...
Fix the data races where node->type is read outside the critical section
(for double-checked locking) by marking the access with READ_ONCE() as
well as ensuring the variable is only accessed once.
Fixes: 3a08c2fd7634 ("bpf: LRU List")
Reported-by: syzbot+3536db46dfa58c573458@syzkaller.appspotmail.com
Reported-by: syzbot+516acdb03d3e27d91bcd@syzkaller.appspotmail.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210209112701.3341724-1-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 93f7a6d818deef69d0ba652d46bae6fbabbf365c upstream.
Currently kdb uses in_interrupt() to determine whether its library
code has been called from the kgdb trap handler or from a saner calling
context such as driver init. This approach is broken because
in_interrupt() alone isn't able to determine kgdb trap handler entry from
normal task context. This can happen during normal use of basic features
such as breakpoints and can also be trivially reproduced using:
echo g > /proc/sysrq-trigger
We can improve this by adding check for in_dbg_master() instead which
explicitly determines if we are running in debugger context.
Cc: stable@vger.kernel.org
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/1611313556-4004-1-git-send-email-sumit.garg@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9b00f1b78809309163dda2d044d9e94a3c0248a3 upstream.
Recently noticed that when mod32 with a known src reg of 0 is performed,
then the dst register is 32-bit truncated in verifier:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (b7) r0 = 0
1: R0_w=inv0 R1=ctx(id=0,off=0,imm=0) R10=fp0
1: (b7) r1 = -1
2: R0_w=inv0 R1_w=inv-1 R10=fp0
2: (b4) w2 = -1
3: R0_w=inv0 R1_w=inv-1 R2_w=inv4294967295 R10=fp0
3: (9c) w1 %= w0
4: R0_w=inv0 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
4: (b7) r0 = 1
5: R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
5: (1d) if r1 == r2 goto pc+1
R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
6: R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
6: (b7) r0 = 2
7: R0_w=inv2 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
7: (95) exit
7: R0=inv1 R1=inv(id=0,umin_value=4294967295,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2=inv4294967295 R10=fp0
7: (95) exit
However, as a runtime result, we get 2 instead of 1, meaning the dst
register does not contain (u32)-1 in this case. The reason is fairly
straight forward given the 0 test leaves the dst register as-is:
# ./bpftool p d x i 23
0: (b7) r0 = 0
1: (b7) r1 = -1
2: (b4) w2 = -1
3: (16) if w0 == 0x0 goto pc+1
4: (9c) w1 %= w0
5: (b7) r0 = 1
6: (1d) if r1 == r2 goto pc+1
7: (b7) r0 = 2
8: (95) exit
This was originally not an issue given the dst register was marked as
completely unknown (aka 64 bit unknown). However, after 468f6eafa6c4
("bpf: fix 32-bit ALU op verification") the verifier casts the register
output to 32 bit, and hence it becomes 32 bit unknown. Note that for
the case where the src register is unknown, the dst register is marked
64 bit unknown. After the fix, the register is truncated by the runtime
and the test passes:
# ./bpftool p d x i 23
0: (b7) r0 = 0
1: (b7) r1 = -1
2: (b4) w2 = -1
3: (16) if w0 == 0x0 goto pc+2
4: (9c) w1 %= w0
5: (05) goto pc+1
6: (bc) w1 = w1
7: (b7) r0 = 1
8: (1d) if r1 == r2 goto pc+1
9: (b7) r0 = 2
10: (95) exit
Semantics also match with {R,W}x mod{64,32} 0 -> {R,W}x. Invalid div
has always been {R,W}x div{64,32} 0 -> 0. Rewrites are as follows:
mod32: mod64:
(16) if w0 == 0x0 goto pc+2 (15) if r0 == 0x0 goto pc+1
(9c) w1 %= w0 (9f) r1 %= r0
(05) goto pc+1
(bc) w1 = w1
Fixes: 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6183f4d3a0a2ad230511987c6c362ca43ec0055f ]
On 32-bit architecture, roundup_pow_of_two() can return 0 when the argument
has upper most bit set due to resulting 1UL << 32. Add a check for this case.
Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210127063653.3576-1-minhquangbui99@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 548f1191d86ccb9bde2a5305988877b7584c01eb ]
The commit 0d00449c7a28 ("x86: Replace ist_enter() with nmi_enter()")
converted do_int3 handler to be "NMI-like".
That made old if (in_nmi()) check abort execution of bpf programs
attached to kprobe when kprobe is firing via int3
(For example when kprobe is placed in the middle of the function).
Remove the check to restore user visible behavior.
Fixes: 0d00449c7a28 ("x86: Replace ist_enter() with nmi_enter()")
Reported-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/20210203070636.70926-1-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 61e960b07b637f0295308ad91268501d744c21b5 ]
When mounting a cgroup hierarchy with disabled controller in cgroup v1,
all available controllers will be attached.
For example, boot with cgroup_no_v1=cpu or cgroup_disable=cpu, and then
mount with "mount -t cgroup -ocpu cpu /sys/fs/cgroup/cpu", then all
enabled controllers will be attached except cpu.
Fix this by adding disabled controller check in cgroup1_parse_param().
If the specified controller is disabled, just return error with information
"Disabled controller xx" rather than attaching all the other enabled
controllers.
Fixes: f5dfb5315d34 ("cgroup: take options parsing into ->parse_monolithic()")
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Reviewed-by: Zefan Li <lizefan.x@bytedance.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 385aac1519417b89cb91b77c22e4ca21db563cd0 upstream.
Fix NULL pointer dereference when adding new psi monitor to the root
cgroup. PSI files for root cgroup was introduced in df5ba5be742 by using
system wide psi struct when reading, but file write/monitor was not
properly fixed. Since the PSI config for the root cgroup isn't
initialized, the current implementation tries to lock a NULL ptr,
resulting in a crash.
Can be triggered by running this as root:
$ tee /sys/fs/cgroup/cpu.pressure <<< "some 10000 1000000"
Signed-off-by: Odin Ugedal <odin@uged.al>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Dan Schatzberg <dschatzberg@fb.com>
Fixes: df5ba5be7425 ("kernel/sched/psi.c: expose pressure metrics on root cgroup")
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: stable@vger.kernel.org # 5.2+
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b220c049d5196dd94d992dd2dc8cba1a5e6123bf upstream.
When filters are used by trace events, a page is allocated on each CPU and
used to copy the trace event fields to this page before writing to the ring
buffer. The reason to use the filter and not write directly into the ring
buffer is because a filter may discard the event and there's more overhead
on discarding from the ring buffer than the extra copy.
The problem here is that there is no check against the size being allocated
when using this page. If an event asks for more than a page size while being
filtered, it will get only a page, leading to the caller writing more that
what was allocated.
Check the length of the request, and if it is more than PAGE_SIZE minus the
header default back to allocating from the ring buffer directly. The ring
buffer may reject the event if its too big anyway, but it wont overflow.
Link: https://lore.kernel.org/ath10k/1612839593-2308-1-git-send-email-wgong@codeaurora.org/
Cc: stable@vger.kernel.org
Fixes: 0fc1b09ff1ff4 ("tracing: Use temp buffer when filtering events")
Reported-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 256cfdd6fdf70c6fcf0f7c8ddb0ebd73ce8f3bc9 upstream.
The file /sys/kernel/tracing/events/enable is used to enable all events by
echoing in "1", or disabling all events when echoing in "0". To know if all
events are enabled, disabled, or some are enabled but not all of them,
cating the file should show either "1" (all enabled), "0" (all disabled), or
"X" (some enabled but not all of them). This works the same as the "enable"
files in the individule system directories (like tracing/events/sched/enable).
But when all events are enabled, the top level "enable" file shows "X". The
reason is that its checking the "ftrace" events, which are special events
that only exist for their format files. These include the format for the
function tracer events, that are enabled when the function tracer is
enabled, but not by the "enable" file. The check includes these events,
which will always be disabled, and even though all true events are enabled,
the top level "enable" file will show "X" instead of "1".
To fix this, have the check test the event's flags to see if it has the
"IGNORE_ENABLE" flag set, and if so, not test it.
Cc: stable@vger.kernel.org
Fixes: 553552ce1796c ("tracing: Combine event filter_active and enable into single flags field")
Reported-by: "Yordan Karadzhov (VMware)" <y.karadz@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ee114dd64c0071500345439fc79dd5e0f9d106ed upstream.
Fix incorrect is_branch{32,64}_taken() analysis for the jsgt case. The return
code for both will tell the caller whether a given conditional jump is taken
or not, e.g. 1 means branch will be taken [for the involved registers] and the
goto target will be executed, 0 means branch will not be taken and instead we
fall-through to the next insn, and last but not least a -1 denotes that it is
not known at verification time whether a branch will be taken or not. Now while
the jsgt has the branch-taken case correct with reg->s32_min_value > sval, the
branch-not-taken case is off-by-one when testing for reg->s32_max_value < sval
since the branch will also be taken for reg->s32_max_value == sval. The jgt
branch analysis, for example, gets this right.
Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Fixes: 4f7b3e82589e ("bpf: improve verifier branch analysis")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e88b2c6e5a4d9ce30d75391e4d950da74bb2bd90 upstream.
While reviewing a different fix, John and I noticed an oddity in one of the
BPF program dumps that stood out, for example:
# bpftool p d x i 13
0: (b7) r0 = 808464450
1: (b4) w4 = 808464432
2: (bc) w0 = w0
3: (15) if r0 == 0x0 goto pc+1
4: (9c) w4 %= w0
[...]
In line 2 we noticed that the mov32 would 32 bit truncate the original src
register for the div/mod operation. While for the two operations the dst
register is typically marked unknown e.g. from adjust_scalar_min_max_vals()
the src register is not, and thus verifier keeps tracking original bounds,
simplified:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (b7) r0 = -1
1: R0_w=invP-1 R1=ctx(id=0,off=0,imm=0) R10=fp0
1: (b7) r1 = -1
2: R0_w=invP-1 R1_w=invP-1 R10=fp0
2: (3c) w0 /= w1
3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1_w=invP-1 R10=fp0
3: (77) r1 >>= 32
4: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1_w=invP4294967295 R10=fp0
4: (bf) r0 = r1
5: R0_w=invP4294967295 R1_w=invP4294967295 R10=fp0
5: (95) exit
processed 6 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
Runtime result of r0 at exit is 0 instead of expected -1. Remove the
verifier mov32 src rewrite in div/mod and replace it with a jmp32 test
instead. After the fix, we result in the following code generation when
having dividend r1 and divisor r6:
div, 64 bit: div, 32 bit:
0: (b7) r6 = 8 0: (b7) r6 = 8
1: (b7) r1 = 8 1: (b7) r1 = 8
2: (55) if r6 != 0x0 goto pc+2 2: (56) if w6 != 0x0 goto pc+2
3: (ac) w1 ^= w1 3: (ac) w1 ^= w1
4: (05) goto pc+1 4: (05) goto pc+1
5: (3f) r1 /= r6 5: (3c) w1 /= w6
6: (b7) r0 = 0 6: (b7) r0 = 0
7: (95) exit 7: (95) exit
mod, 64 bit: mod, 32 bit:
0: (b7) r6 = 8 0: (b7) r6 = 8
1: (b7) r1 = 8 1: (b7) r1 = 8
2: (15) if r6 == 0x0 goto pc+1 2: (16) if w6 == 0x0 goto pc+1
3: (9f) r1 %= r6 3: (9c) w1 %= w6
4: (b7) r0 = 0 4: (b7) r0 = 0
5: (95) exit 5: (95) exit
x86 in particular can throw a 'divide error' exception for div
instruction not only for divisor being zero, but also for the case
when the quotient is too large for the designated register. For the
edx:eax and rdx:rax dividend pair it is not an issue in x86 BPF JIT
since we always zero edx (rdx). Hence really the only protection
needed is against divisor being zero.
Fixes: 68fda450a7df ("bpf: fix 32-bit divide by zero")
Co-developed-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fd675184fc7abfd1e1c52d23e8e900676b5a1c1a upstream.
Anatoly has been fuzzing with kBdysch harness and reported a hang in
one of the outcomes:
func#0 @0
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (b7) r0 = 808464450
1: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R10=fp0
1: (b4) w4 = 808464432
2: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP808464432 R10=fp0
2: (9c) w4 %= w0
3: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
3: (66) if w4 s> 0x30303030 goto pc+0
R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0
4: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0
4: (7f) r0 >>= r0
5: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0
5: (9c) w4 %= w0
6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
6: (66) if w0 s> 0x3030 goto pc+0
R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
7: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0
7: (d6) if w0 s<= 0x303030 goto pc+1
9: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0
9: (95) exit
propagating r0
from 6 to 7: safe
4: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umin_value=808464433,umax_value=2147483647,var_off=(0x0; 0x7fffffff)) R10=fp0
4: (7f) r0 >>= r0
5: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umin_value=808464433,umax_value=2147483647,var_off=(0x0; 0x7fffffff)) R10=fp0
5: (9c) w4 %= w0
6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
6: (66) if w0 s> 0x3030 goto pc+0
R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
propagating r0
7: safe
propagating r0
from 6 to 7: safe
processed 15 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1
The underlying program was xlated as follows:
# bpftool p d x i 10
0: (b7) r0 = 808464450
1: (b4) w4 = 808464432
2: (bc) w0 = w0
3: (15) if r0 == 0x0 goto pc+1
4: (9c) w4 %= w0
5: (66) if w4 s> 0x30303030 goto pc+0
6: (7f) r0 >>= r0
7: (bc) w0 = w0
8: (15) if r0 == 0x0 goto pc+1
9: (9c) w4 %= w0
10: (66) if w0 s> 0x3030 goto pc+0
11: (d6) if w0 s<= 0x303030 goto pc+1
12: (05) goto pc-1
13: (95) exit
The verifier rewrote original instructions it recognized as dead code with
'goto pc-1', but reality differs from verifier simulation in that we are
actually able to trigger a hang due to hitting the 'goto pc-1' instructions.
Taking a closer look at the verifier analysis, the reason is that it misjudges
its pruning decision at the first 'from 6 to 7: safe' occasion. What happens
is that while both old/cur registers are marked as precise, they get misjudged
for the jmp32 case as range_within() yields true, meaning that the prior
verification path with a wider register bound could be verified successfully
and therefore the current path with a narrower register bound is deemed safe
as well whereas in reality it's not. R0 old/cur path's bounds compare as
follows:
old: smin_value=0x8000000000000000,smax_value=0x7fffffffffffffff,umin_value=0x0,umax_value=0xffffffffffffffff,var_off=(0x0; 0xffffffffffffffff)
cur: smin_value=0x8000000000000000,smax_value=0x7fffffff7fffffff,umin_value=0x0,umax_value=0xffffffff7fffffff,var_off=(0x0; 0xffffffff7fffffff)
old: s32_min_value=0x80000000,s32_max_value=0x00003030,u32_min_value=0x00000000,u32_max_value=0xffffffff
cur: s32_min_value=0x00003031,s32_max_value=0x7fffffff,u32_min_value=0x00003031,u32_max_value=0x7fffffff
The 64 bit bounds generally look okay and while the information that got
propagated from 32 to 64 bit looks correct as well, it's not precise enough
for judging a conditional jmp32. Given the latter only operates on subregisters
we also need to take these into account as well for a range_within() probe
in order to be able to prune paths. Extending the range_within() constraint
to both bounds will be able to tell us that the old signed 32 bit bounds are
not wider than the cur signed 32 bit bounds.
With the fix in place, the program will now verify the 'goto' branch case as
it should have been:
[...]
6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
6: (66) if w0 s> 0x3030 goto pc+0
R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
7: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0
7: (d6) if w0 s<= 0x303030 goto pc+1
9: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0
9: (95) exit
7: R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=12337,u32_min_value=12337,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
7: (d6) if w0 s<= 0x303030 goto pc+1
R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=3158065,u32_min_value=3158065,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
8: R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=3158065,u32_min_value=3158065,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
8: (30) r0 = *(u8 *)skb[808464432]
BPF_LD_[ABS|IND] uses reserved fields
processed 11 insns (limit 1000000) max_states_per_insn 1 total_states 1 peak_states 1 mark_read 1
The bug is quite subtle in the sense that when verifier would determine that
a given branch is dead code, it would (here: wrongly) remove these instructions
from the program and hard-wire the taken branch for privileged programs instead
of the 'goto pc-1' rewrites which will cause hard to debug problems.
Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c457e8cb75eda91906a4f89fc39bde3f9a43922 upstream.
When MSI_FLAG_ACTIVATE_EARLY is set (which is the case for PCI),
__msi_domain_alloc_irqs() performs the activation of the interrupt (which
in the case of PCI results in the endpoint being programmed) as soon as the
interrupt is allocated.
But it appears that this is only done for the first vector, introducing an
inconsistent behaviour for PCI Multi-MSI.
Fix it by iterating over the number of vectors allocated to each MSI
descriptor. This is easily achieved by introducing a new
"for_each_msi_vector" iterator, together with a tiny bit of refactoring.
Fixes: f3b0946d629c ("genirq/msi: Make sure PCI MSIs are activated early")
Reported-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210123122759.1781359-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit da7f84cdf02fd5f66864041f45018b328911b722 upstream.
Eaerlier, tracing was disabled when reading the trace file. This behavior
was changed with:
commit 06e0a548bad0 ("tracing: Do not disable tracing when reading the
trace file").
This doesn't seem to work with the latency tracers.
The above mentioned commit dit not only change the behavior but also added
an option to emulate the old behavior. The idea with this patch is to
enable this pause-on-trace option when the latency tracers are used.
Link: https://lkml.kernel.org/r/20210119164344.37500-2-Viktor.Rosendahl@bmw.de
Cc: stable@vger.kernel.org
Fixes: 06e0a548bad0 ("tracing: Do not disable tracing when reading the trace file")
Signed-off-by: Viktor Rosendahl <Viktor.Rosendahl@bmw.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0188b87899ffc4a1d36a0badbe77d56c92fd91dc upstream.
Our system encountered a re-init error when re-registering same kretprobe,
where the kretprobe_instance in rp->free_instances is illegally accessed
after re-init.
Implementation to avoid re-registration has been introduced for kprobe
before, but lags for register_kretprobe(). We must check if kprobe has
been re-registered before re-initializing kretprobe, otherwise it will
destroy the data struct of kretprobe registered, which can lead to memory
leak, system crash, also some unexpected behaviors.
We use check_kprobe_rereg() to check if kprobe has been re-registered
before running register_kretprobe()'s body, for giving a warning message
and terminate registration process.
Link: https://lkml.kernel.org/r/20210128124427.2031088-1-bobo.shaobowang@huawei.com
Cc: stable@vger.kernel.org
Fixes: 1f0ab40976460 ("kprobes: Prevent re-registration of the same kprobe")
[ The above commit should have been done for kretprobes too ]
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@linux.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 97c753e62e6c31a404183898d950d8c08d752dbd upstream.
Fix kprobe_on_func_entry() returns error code instead of false so that
register_kretprobe() can return an appropriate error code.
append_trace_kprobe() expects the kprobe registration returns -ENOENT
when the target symbol is not found, and it checks whether the target
module is unloaded or not. If the target module doesn't exist, it
defers to probe the target symbol until the module is loaded.
However, since register_kretprobe() returns -EINVAL instead of -ENOENT
in that case, it always fail on putting the kretprobe event on unloaded
modules. e.g.
Kprobe event:
/sys/kernel/debug/tracing # echo p xfs:xfs_end_io >> kprobe_events
[ 16.515574] trace_kprobe: This probe might be able to register after target module is loaded. Continue.
Kretprobe event: (p -> r)
/sys/kernel/debug/tracing # echo r xfs:xfs_end_io >> kprobe_events
sh: write error: Invalid argument
/sys/kernel/debug/tracing # cat error_log
[ 41.122514] trace_kprobe: error: Failed to register probe event
Command: r xfs:xfs_end_io
^
To fix this bug, change kprobe_on_func_entry() to detect symbol lookup
failure and return -ENOENT in that case. Otherwise it returns -EINVAL
or 0 (succeeded, given address is on the entry).
Link: https://lkml.kernel.org/r/161176187132.1067016.8118042342894378981.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 59158ec4aef7 ("tracing/kprobes: Check the probe on unloaded module correctly")
Reported-by: Jianlin Lv <Jianlin.Lv@arm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7e0a9220467dbcfdc5bc62825724f3e52e50ab31 upstream.
On some archs, the idle task can call into cpu_suspend(). The cpu_suspend()
will disable or pause function graph tracing, as there's some paths in
bringing down the CPU that can have issues with its return address being
modified. The task_struct structure has a "tracing_graph_pause" atomic
counter, that when set to something other than zero, the function graph
tracer will not modify the return address.
The problem is that the tracing_graph_pause counter is initialized when the
function graph tracer is enabled. This can corrupt the counter for the idle
task if it is suspended in these architectures.
CPU 1 CPU 2
----- -----
do_idle()
cpu_suspend()
pause_graph_tracing()
task_struct->tracing_graph_pause++ (0 -> 1)
start_graph_tracing()
for_each_online_cpu(cpu) {
ftrace_graph_init_idle_task(cpu)
task-struct->tracing_graph_pause = 0 (1 -> 0)
unpause_graph_tracing()
task_struct->tracing_graph_pause-- (0 -> -1)
The above should have gone from 1 to zero, and enabled function graph
tracing again. But instead, it is set to -1, which keeps it disabled.
There's no reason that the field tracing_graph_pause on the task_struct can
not be initialized at boot up.
Cc: stable@vger.kernel.org
Fixes: 380c4b1411ccd ("tracing/function-graph-tracer: append the tracing_graph_flag")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211339
Reported-by: pierre.gondois@arm.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 150a27328b681425c8cab239894a48f2aeb870e9 ]
Building the kernel with CONFIG_BPF_PRELOAD, and by providing a relative
path for the output directory, may fail with the following error:
$ make O=build bindeb-pkg
...
/.../linux/tools/scripts/Makefile.include:5: *** O=build does not exist. Stop.
make[7]: *** [/.../linux/kernel/bpf/preload/Makefile:9: kernel/bpf/preload/libbpf.a] Error 2
make[6]: *** [/.../linux/scripts/Makefile.build:500: kernel/bpf/preload] Error 2
make[5]: *** [/.../linux/scripts/Makefile.build:500: kernel/bpf] Error 2
make[4]: *** [/.../linux/Makefile:1799: kernel] Error 2
make[4]: *** Waiting for unfinished jobs....
In the case above, for the "bindeb-pkg" target, the error is produced by
the "dummy" check in Makefile.include, called from libbpf's Makefile.
This check changes directory to $(PWD) before checking for the existence
of $(O). But at this step we have $(PWD) pointing to "/.../linux/build",
and $(O) pointing to "build". So the Makefile.include tries in fact to
assert the existence of a directory named "/.../linux/build/build",
which does not exist.
Note that the error does not occur for all make targets and
architectures combinations. This was observed on x86 for "bindeb-pkg",
or for a regular build for UML [0].
Here are some details. The root Makefile recursively calls itself once,
after changing directory to $(O). The content for the variable $(PWD) is
preserved across recursive calls to make, so it is unchanged at this
step. For "bindeb-pkg", $(PWD) is eventually updated because the target
writes a new Makefile (as debian/rules) and calls it indirectly through
dpkg-buildpackage. This script does not preserve $(PWD), which is reset
to the current working directory when the target in debian/rules is
called.
Although not investigated, it seems likely that something similar causes
UML to change its value for $(PWD).
Non-trivial fixes could be to remove the use of $(PWD) from the "dummy"
check, or to make sure that $(PWD) and $(O) are preserved or updated to
always play well and form a valid $(PWD)/$(O) path across the different
targets and architectures. Instead, we take a simpler approach and just
update $(O) when calling libbpf's Makefile, so it points to an absolute
path which should always resolve for the "dummy" check run (through
includes) by that Makefile.
David Gow previously posted a slightly different version of this patch
as a RFC [0], two months ago or so.
[0] https://lore.kernel.org/bpf/20201119085022.3606135-1-davidgow@google.com/t/#u
Fixes: d71fa5c9763c ("bpf: Add kernel module with user mode driver that populates bpffs.")
Reported-by: David Gow <davidgow@google.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/bpf/20210126161320.24561-1-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b9557caaf872271671bdc1ef003d72f421eb72f6 ]
Put file f if inode_storage_ptr() returns NULL.
Fixes: 8ea636848aca ("bpf: Implement bpf_local_storage for inodes")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210121020856.25507-1-bianpan2016@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f4a2da755a7e1f5d845c52aee71336cee289935a ]
Since ctx.optlen is signed, a larger value than max_value could be
passed, as it is later on used as unsigned, which causes a WARN_ON_ONCE
in the copy_to_user.
Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks")
Signed-off-by: Loris Reiff <loris.reiff@liblor.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20210122164232.61770-2-loris.reiff@liblor.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bb8b81e396f7afbe7c50d789e2107512274d2a35 ]
A toctou issue in `__cgroup_bpf_run_filter_getsockopt` can trigger a
WARN_ON_ONCE in a check of `copy_from_user`.
`*optlen` is checked to be non-negative in the individual getsockopt
functions beforehand. Changing `*optlen` in a race to a negative value
will result in a `copy_from_user(ctx.optval, optval, ctx.optlen)` with
`ctx.optlen` being a negative integer.
Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks")
Signed-off-by: Loris Reiff <loris.reiff@liblor.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20210122164232.61770-1-loris.reiff@liblor.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 640f17c82460e9724fd256f0a1f5d99e7ff0bda4 ]
create_worker() will already set the right affinity using
kthread_bind_mask(), this means only the rescuer will need to change
it's affinity.
Howveer, while in cpu-hot-unplug a regular task is not allowed to run
on online&&!active as it would be pushed away quite agressively. We
need KTHREAD_IS_PER_CPU to survive in that environment.
Therefore set the affinity after getting that magic flag.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.826629830@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ac687e6e8c26181a33270efd1a2e2241377924b0 ]
There is a need to distinguish geniune per-cpu kthreads from kthreads
that happen to have a single CPU affinity.
Geniune per-cpu kthreads are kthreads that are CPU affine for
correctness, these will obviously have PF_KTHREAD set, but must also
have PF_NO_SETAFFINITY set, lest userspace modify their affinity and
ruins things.
However, these two things are not sufficient, PF_NO_SETAFFINITY is
also set on other tasks that have their affinities controlled through
other means, like for instance workqueues.
Therefore another bit is needed; it turns out kthread_create_per_cpu()
already has such a bit: KTHREAD_IS_PER_CPU, which is used to make
kthread_park()/kthread_unpark() work correctly.
Expose this flag and remove the implicit setting of it from
kthread_create_on_cpu(); the io_uring usage of it seems dubious at
best.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.557620262@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 77ca93a6b1223e210e58e1000c09d8d420403c94 ]
vmlinux.o: warning: objtool: lock_is_held_type()+0x60: call to check_flags.part.0() leaves .noinstr.text section
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210106144017.652218215@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit fef9c8d28e28a808274a18fbd8cc2685817fd62a upstream.
Flush the swap writer after, not before, marking the files, to ensure the
signature is properly written.
Fixes: 6f612af57821 ("PM / Hibernate: Group swap ops")
Signed-off-by: Laurent Badel <laurentbadel@eaton.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 56c91a18432b631ca18438841fd1831ef756cabf upstream.
Function kernel_kexec() is called with lock system_transition_mutex
held in reboot system call. While inside kernel_kexec(), it will
acquire system_transition_mutex agin. This will lead to dead lock.
The dead lock should be easily triggered, it hasn't caused any
failure report just because the feature 'kexec jump' is almost not
used by anyone as far as I know. An inquiry can be made about who
is using 'kexec jump' and where it's used. Before that, let's simply
remove the lock operation inside CONFIG_KEXEC_JUMP ifdeffery scope.
Fixes: 55f2503c3b69 ("PM / reboot: Eliminate race between reboot and suspend")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Pingfan Liu <kernelfans@gmail.com>
Cc: 4.19+ <stable@vger.kernel.org> # 4.19+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 08d60e5999540110576e7c1346d486220751b7f9 upstream.
Commit f0e386ee0c0b ("printk: fix buffer overflow potential for
print_text()") added string termination in record_print_text().
However it used the wrong base pointer for adding the terminator.
This led to a 0-byte being written somewhere beyond the buffer.
Use the correct base pointer when adding the terminator.
Fixes: f0e386ee0c0b ("printk: fix buffer overflow potential for print_text()")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210124202728.4718-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f0e386ee0c0b71ea6f7238506a4d0965a2dbef11 upstream.
Before the commit 896fbe20b4e2333fb55 ("printk: use the lockless
ringbuffer"), msg_print_text() would only write up to size-1 bytes
into the provided buffer. Some callers expect this behavior and
append a terminator to returned string. In particular:
arch/powerpc/xmon/xmon.c:dump_log_buf()
arch/um/kernel/kmsg_dump.c:kmsg_dumper_stdout()
msg_print_text() has been replaced by record_print_text(), which
currently fills the full size of the buffer. This causes a
buffer overflow for the above callers.
Change record_print_text() so that it will only use size-1 bytes
for text data. Also, for paranoia sakes, add a terminator after
the text data.
And finally, document this behavior so that it is clear that only
size-1 bytes are used and a terminator is added.
Fixes: 896fbe20b4e2333fb55 ("printk: use the lockless ringbuffer")
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210114170412.4819-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b1b6b5a30dce872f500dc43f067cba8e7f86fc7d ]
For cancelling io_uring requests it needs either to be able to run
currently enqueued task_works or having it shut down by that moment.
Otherwise io_uring_cancel_files() may be waiting for requests that won't
ever complete.
Go with the first way and do cancellations before setting PF_EXITING and
so before putting the task_work infrastructure into a transition state
where task_work_run() would better not be called.
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
