| Age | Commit message (Collapse) | Author |
|---|
|
commit 44585f7bc0cb01095bc2ad4258049c02bbad21ef upstream.
When CONFIG_PROC_FS is disabled psi code generates the following
warnings:
kernel/sched/psi.c:1364:30: warning: 'psi_cpu_proc_ops' defined but not used [-Wunused-const-variable=]
1364 | static const struct proc_ops psi_cpu_proc_ops = {
| ^~~~~~~~~~~~~~~~
kernel/sched/psi.c:1355:30: warning: 'psi_memory_proc_ops' defined but not used [-Wunused-const-variable=]
1355 | static const struct proc_ops psi_memory_proc_ops = {
| ^~~~~~~~~~~~~~~~~~~
kernel/sched/psi.c:1346:30: warning: 'psi_io_proc_ops' defined but not used [-Wunused-const-variable=]
1346 | static const struct proc_ops psi_io_proc_ops = {
| ^~~~~~~~~~~~~~~
Make definitions of these structures and related functions conditional
on CONFIG_PROC_FS config.
Link: https://lkml.kernel.org/r/20220119223940.787748-3-surenb@google.com
Fixes: 0e94682b73bf ("psi: introduce psi monitor")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c5de60cd622a2607c043ba65e25a6e9998a369f9 upstream.
The active cgroup events are managed in the per-cpu cgrp_cpuctx_list.
This list is only accessed from current cpu and not protected by any
locks. But from the commit ef54c1a476ae ("perf: Rework
perf_event_exit_event()"), it's possible to access (actually modify)
the list from another cpu.
In the perf_remove_from_context(), it can remove an event from the
context without an IPI when the context is not active. This is not
safe with cgroup events which can have some active events in the
context even if ctx->is_active is 0 at the moment. The target cpu
might be in the middle of list iteration at the same time.
If the event is enabled when it's about to be closed, it might call
perf_cgroup_event_disable() and list_del() with the cgrp_cpuctx_list
on a different cpu.
This resulted in a crash due to an invalid list pointer access during
the cgroup list traversal on the cpu which the event belongs to.
Let's fallback to IPI to access the cgrp_cpuctx_list from that cpu.
Similarly, perf_install_in_context() should use IPI for the cgroup
events too.
Fixes: ef54c1a476ae ("perf: Rework perf_event_exit_event()")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124195808.2252071-1-namhyung@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 98b0d890220d45418cfbc5157b3382e6da5a12ab ]
Rick reported performance regressions in bugzilla because of cpu frequency
being lower than before:
https://bugzilla.kernel.org/show_bug.cgi?id=215045
He bisected the problem to:
commit 1c35b07e6d39 ("sched/fair: Ensure _sum and _avg values stay consistent")
This commit forces util_sum to be synced with the new util_avg after
removing the contribution of a task and before the next periodic sync. By
doing so util_sum is rounded to its lower bound and might lost up to
LOAD_AVG_MAX-1 of accumulated contribution which has not yet been
reflected in util_avg.
Instead of always setting util_sum to the low bound of util_avg, which can
significantly lower the utilization of root cfs_rq after propagating the
change down into the hierarchy, we revert the change of util_sum and
propagate the difference.
In addition, we also check that cfs's util_sum always stays above the
lower bound for a given util_avg as it has been observed that
sched_entity's util_sum is sometimes above cfs one.
Fixes: 1c35b07e6d39 ("sched/fair: Ensure _sum and _avg values stay consistent")
Reported-by: Rick Yiu <rickyiu@google.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Link: https://lkml.kernel.org/r/20220111134659.24961-2-vincent.guittot@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 09f5e7dc7ad705289e1b1ec065439aa3c42951c4 ]
Time readers that cannot take locks (due to NMI etc..) currently make
use of perf_event::shadow_ctx_time, which, for that event gives:
time' = now + (time - timestamp)
or, alternatively arranged:
time' = time + (now - timestamp)
IOW, the progression of time since the last time the shadow_ctx_time
was updated.
There's problems with this:
A) the shadow_ctx_time is per-event, even though the ctx_time it
reflects is obviously per context. The direct concequence of this
is that the context needs to iterate all events all the time to
keep the shadow_ctx_time in sync.
B) even with the prior point, the context itself might not be active
meaning its time should not advance to begin with.
C) shadow_ctx_time isn't consistently updated when ctx_time is
There are 3 users of this stuff, that suffer differently from this:
- calc_timer_values()
- perf_output_read()
- perf_event_update_userpage() /* A */
- perf_event_read_local() /* A,B */
In particular, perf_output_read() doesn't suffer at all, because it's
sample driven and hence only relevant when the event is actually
running.
This same was supposed to be true for perf_event_update_userpage(),
after all self-monitoring implies the context is active *HOWEVER*, as
per commit f79256532682 ("perf/core: fix userpage->time_enabled of
inactive events") this goes wrong when combined with counter
overcommit, in that case those events that do not get scheduled when
the context becomes active (task events typically) miss out on the
EVENT_TIME update and ENABLED time is inflated (for a little while)
with the time the context was inactive. Once the event gets rotated
in, this gets corrected, leading to a non-monotonic timeflow.
perf_event_read_local() made things even worse, it can request time at
any point, suffering all the problems perf_event_update_userpage()
does and more. Because while perf_event_update_userpage() is limited
by the context being active, perf_event_read_local() users have no
such constraint.
Therefore, completely overhaul things and do away with
perf_event::shadow_ctx_time. Instead have regular context time updates
keep track of this offset directly and provide perf_event_time_now()
to complement perf_event_time().
perf_event_time_now() will, in adition to being context wide, also
take into account if the context is active. For inactive context, it
will not advance time.
This latter property means the cgroup perf_cgroup_info context needs
to grow addition state to track this.
Additionally, since all this is strictly per-cpu, we can use barrier()
to order context activity vs context time.
Fixes: 7d9285e82db5 ("perf/bpf: Extend the perf_event_read_local() interface, a.k.a. "bpf: perf event change needed for subsequent bpf helpers"")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Song Liu <song@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/YcB06DasOBtU0b00@hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 809232619f5b15e31fb3563985e705454f32621f upstream.
The membarrier command MEMBARRIER_CMD_QUERY allows querying the
available membarrier commands. When the membarrier-rseq fence commands
were added, a new MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ_BITMASK was
introduced with the intent to expose them with the MEMBARRIER_CMD_QUERY
command, the but it was never added to MEMBARRIER_CMD_BITMASK.
The membarrier-rseq fence commands are therefore not wired up with the
query command.
Rename MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ_BITMASK to
MEMBARRIER_PRIVATE_EXPEDITED_RSEQ_BITMASK (the bitmask is not a command
per-se), and change the erroneous
MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_RSEQ_BITMASK (which does not
actually exist) to MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_RSEQ.
Wire up MEMBARRIER_PRIVATE_EXPEDITED_RSEQ_BITMASK in
MEMBARRIER_CMD_BITMASK. Fixing this allows discovering availability of
the membarrier-rseq fence feature.
Fixes: 2a36ab717e8f ("rseq/membarrier: Add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org> # 5.10+
Link: https://lkml.kernel.org/r/20220117203010.30129-1-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a06247c6804f1a7c86a2e5398a4c1f1db1471848 upstream.
With write operation on psi files replacing old trigger with a new one,
the lifetime of its waitqueue is totally arbitrary. Overwriting an
existing trigger causes its waitqueue to be freed and pending poll()
will stumble on trigger->event_wait which was destroyed.
Fix this by disallowing to redefine an existing psi trigger. If a write
operation is used on a file descriptor with an already existing psi
trigger, the operation will fail with EBUSY error.
Also bypass a check for psi_disabled in the psi_trigger_destroy as the
flag can be flipped after the trigger is created, leading to a memory
leak.
Fixes: 0e94682b73bf ("psi: introduce psi monitor")
Reported-by: syzbot+cdb5dd11c97cc532efad@syzkaller.appspotmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Analyzed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220111232309.1786347-1-surenb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 67ab5eb71b37b55f7c5522d080a1b42823351776 upstream.
tr->n_err_log_entries should only be increased if entry allocation
succeeds.
Doing it when it fails won't cause any problems other than wasting an
entry, but should be fixed anyway.
Link: https://lkml.kernel.org/r/cad1ab28f75968db0f466925e7cba5970cec6c29.1643319703.git.zanussi@kernel.org
Cc: stable@vger.kernel.org
Fixes: 2f754e771b1a6 ("tracing: Don't inc err_log entry count if entry allocation fails")
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 097f1eefedeab528cecbd35586dfe293853ffb17 upstream.
During expression parsing, a new expression field is created which
should inherit the properties of the operands, such as size and
is_signed.
is_signed propagation was missing, causing spurious errors with signed
operands. Add it in parse_expr() and parse_unary() to fix the problem.
Link: https://lkml.kernel.org/r/f4dac08742fd7a0920bf80a73c6c44042f5eaa40.1643319703.git.zanussi@kernel.org
Cc: stable@vger.kernel.org
Fixes: 100719dcef447 ("tracing: Add simple expression support to hist triggers")
Reported-by: Yordan Karadzhov <ykaradzhov@vmware.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215513
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e629e7b525a179e29d53463d992bdee759c950fb upstream.
kfree() is missing on an error path to free the memory allocated by
kstrdup():
p = param = kstrdup(data->params[i], GFP_KERNEL);
So it is better to free it via kfree(p).
Link: https://lkml.kernel.org/r/tencent_C52895FD37802832A3E5B272D05008866F0A@qq.com
Cc: stable@vger.kernel.org
Fixes: d380dcde9a07c ("tracing: Fix now invalid var_ref_vals assumption in trace action")
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c9d967b2ce40d71e968eb839f36c936b8a9cf1ea upstream.
The buffer handling in pm_show_wakelocks() is tricky, and hopefully
correct. Ensure it really is correct by using sysfs_emit_at() which
handles all of the tricky string handling logic in a PAGE_SIZE buffer
for us automatically as this is a sysfs file being read from.
Reviewed-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f9d87929d451d3e649699d0f1d74f71f77ad38f5 upstream.
When the ucount code was refactored to create get_ucount it was missed
that some of the contexts in which a rlimit is kept elevated can be
the only reference to the user/ucount in the system.
Ordinary ucount references exist in places that also have a reference
to the user namspace, but in POSIX message queues, the SysV shm code,
and the SIGPENDING code there is no independent user namespace
reference.
Inspection of the the user_namespace show no instance of circular
references between struct ucounts and the user_namespace. So
hold a reference from struct ucount to i's user_namespace to
resolve this problem.
Link: https://lore.kernel.org/lkml/YZV7Z+yXbsx9p3JN@fixkernel.com/
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Reported-by: Mathias Krause <minipli@grsecurity.net>
Tested-by: Mathias Krause <minipli@grsecurity.net>
Reviewed-by: Mathias Krause <minipli@grsecurity.net>
Reviewed-by: Alexey Gladkov <legion@kernel.org>
Fixes: d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of ucounts")
Fixes: 6e52a9f0532f ("Reimplement RLIMIT_MSGQUEUE on top of ucounts")
Fixes: d7c9e99aee48 ("Reimplement RLIMIT_MEMLOCK on top of ucounts")
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b992f01e66150fc5e90be4a96f5eb8e634c8249e upstream.
task_pt_regs() can return NULL on powerpc for kernel threads. This is
then used in __bpf_get_stack() to check for user mode, resulting in a
kernel oops. Guard against this by checking return value of
task_pt_regs() before trying to obtain the call chain.
Fixes: fa28dcb82a38f8 ("bpf: Introduce helper bpf_get_task_stack()")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d5ef83c361cc255494afd15ff1b4fb02a36e1dcf.1641468127.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 614ddad17f22a22e035e2ea37a04815f50362017 upstream.
Currently, rcu_advance_cbs_nowake() checks that a grace period is in
progress, however, that grace period could end just after the check.
This commit rechecks that a grace period is still in progress while
holding the rcu_node structure's lock. The grace period cannot end while
the current CPU's rcu_node structure's ->lock is held, thus avoiding
false positives from the WARN_ON_ONCE().
As Daniel Vacek noted, it is not necessary for the rcu_node structure
to have a CPU that has not yet passed through its quiescent state.
Tested-by: Guillaume Morin <guillaume@morinfr.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1b5a42d9c85f0e731f01c8d1129001fd8531a8a0 upstream.
In the function bacct_add_task the code reading task->exit_code was
introduced in commit f3cef7a99469 ("[PATCH] csa: basic accounting over
taskstats"), and it is not entirely clear what the taskstats interface
is trying to return as only returning the exit_code of the first task
in a process doesn't make a lot of sense.
As best as I can figure the intent is to return task->exit_code after
a task exits. The field is returned with per task fields, so the
exit_code of the entire process is not wanted. Only the value of the
first task is returned so this is not a useful way to get the per task
ptrace stop code. The ordinary case of returning this value is
returning after a task exits, which also precludes use for getting
a ptrace value.
It is common to for the first task of a process to also be the last
task of a process so this field may have done something reasonable by
accident in testing.
Make ac_exitcode a reliable per task value by always returning it for
every exited task.
Setting ac_exitcode in a sensible mannter makes it possible to continue
to provide this value going forward.
Cc: Balbir Singh <bsingharora@gmail.com>
Fixes: f3cef7a99469 ("[PATCH] csa: basic accounting over taskstats")
Link: https://lkml.kernel.org/r/20220103213312.9144-5-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d400a6cf1c8a57cdf10f35220ead3284320d85ff upstream.
Similar as with other pointer types where we use ldimm64, clear the register
content to zero first, and then populate the PTR_TO_FUNC type and subprogno
number. Currently this is not done, and leads to reuse of stale register
tracking data.
Given for special ldimm64 cases we always clear the register offset, make it
common for all cases, so it won't be forgotten in future.
Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1e9d74660d4df625b0889e77018f9e94727ceacd upstream.
We noticed our tc ebpf tools can't start after we upgrade our in-house kernel
version from 4.19 to 5.10. That is because of the behaviour change in bpffs
caused by commit d2935de7e4fd ("vfs: Convert bpf to use the new mount API").
In our tc ebpf tools, we do strict environment check. If the environment is
not matched, we won't allow to start the ebpf progs. One of the check is whether
bpffs is properly mounted. The mount information of bpffs in kernel-4.19 and
kernel-5.10 are as follows:
- kernel 4.19
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
bpffs on /sys/fs/bpf type bpf (rw,relatime)
- kernel 5.10
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
none on /sys/fs/bpf type bpf (rw,relatime)
The device name in kernel-5.10 is displayed as none instead of bpffs, then our
environment check fails. Currently we modify the tools to adopt to the kernel
behaviour change, but I think we'd better change the kernel code to keep the
behavior consistent.
After this change, the mount information will be displayed the same with the
behavior in kernel-4.19, for example:
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
bpffs on /sys/fs/bpf type bpf (rw,relatime)
Fixes: d2935de7e4fd ("vfs: Convert bpf to use the new mount API")
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/bpf/20220108134623.32467-1-laoar.shao@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3e2a56e6f639492311e0a8533f0a7aed60816308 upstream.
Currently, the syscall trace events call trace_buffer_lock_reserve()
directly, which means that it misses out on some of the filtering
optimizations provided by the helper function
trace_event_buffer_lock_reserve(). Have the syscall trace events call that
instead, as it was missed when adding the update to use the temp buffer
when filtering.
Link: https://lkml.kernel.org/r/20220107225839.823118570@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 0fc1b09ff1ff4 ("tracing: Use temp buffer when filtering events")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dfea08a2116fe327f79d8f4d4b2cf6e0c88be11f upstream.
The 'nmissed' column of the 'kprobe_profile' file for kretprobe is
not showed correctly, kretprobe can be skipped by two reasons,
shortage of kretprobe_instance which is counted by tk->rp.nmissed,
and kprobe itself is missed by some reason, so to show the sum.
Link: https://lkml.kernel.org/r/20220107150242.5019-1-xyz.sun.ok@gmail.com
Cc: stable@vger.kernel.org
Fixes: 4a846b443b4e ("tracing/kprobes: Cleanup kprobe tracer code")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Xiangyang Zhang <xyz.sun.ok@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0878355b51f5f26632e652c848a8e174bb02d22d upstream.
If start_per_cpu_kthreads() called from osnoise_workload_start() returns
error, event hooks are left in broken state: unhook_irq_events() called
but unhook_thread_events() and unhook_softirq_events() not called, and
trace_osnoise_callback_enabled flag not cleared.
On the next tracer enable, hooks get not installed due to
trace_osnoise_callback_enabled flag.
And on the further tracer disable an attempt to remove non-installed
hooks happened, hitting a WARN_ON_ONCE() in tracepoint_remove_func().
Fix the error path by adding the missing part of cleanup.
While at this, introduce osnoise_unhook_events() to avoid code
duplication between this error path and normal tracer disable.
Link: https://lkml.kernel.org/r/20220109153459.3701773-1-nikita.yushchenko@virtuozzo.com
Cc: stable@vger.kernel.org
Fixes: bce29ac9ce0b ("trace: Add osnoise tracer")
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Nikita Yushchenko <nikita.yushchenko@virtuozzo.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dd02d4234c9a2214a81c57a16484304a1a51872a upstream.
cpuacct has 2 different ways of accounting and showing user
and system times.
The first one uses cpuacct_account_field() to account times
and cpuacct.stat file to expose them. And this one seems to work ok.
The second one is uses cpuacct_charge() function for accounting and
set of cpuacct.usage* files to show times. Despite some attempts to
fix it in the past it still doesn't work. Sometimes while running KVM
guest the cpuacct_charge() accounts most of the guest time as
system time. This doesn't match with user&system times shown in
cpuacct.stat or proc/<pid>/stat.
Demonstration:
# git clone https://github.com/aryabinin/kvmsample
# make
# mkdir /sys/fs/cgroup/cpuacct/test
# echo $$ > /sys/fs/cgroup/cpuacct/test/tasks
# ./kvmsample &
# for i in {1..5}; do cat /sys/fs/cgroup/cpuacct/test/cpuacct.usage_sys; sleep 1; done
1976535645
2979839428
3979832704
4983603153
5983604157
Use cpustats accounted in cpuacct_account_field() as the source
of user/sys times for cpuacct.usage* files. Make cpuacct_charge()
to account only summary execution time.
Fixes: d740037fac70 ("sched/cpuacct: Split usage accounting into user_usage and sys_usage")
Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211115164607.23784-3-arbn@yandex-team.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9731698ecb9c851f353ce2496292ff9fcea39dff upstream.
cpuacct.stat in no-root cgroups shows user time without guest time
included int it. This doesn't match with user time shown in root
cpuacct.stat and /proc/<pid>/stat. This also affects cgroup2's cpu.stat
in the same way.
Make account_guest_time() to add user time to cgroup's cpustat to
fix this.
Fixes: ef12fefabf94 ("cpuacct: add per-cgroup utime/stime statistics")
Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211115164607.23784-1-arbn@yandex-team.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1c1857d400355e96f0fe8b32adc6fa7594d03b52 ]
kstrndup() is a memory allocation-related function, it returns NULL when
some internal memory errors happen. It is better to check the return
value of it so to catch the memory error in time.
Link: https://lkml.kernel.org/r/tencent_4D6E270731456EB88712ED7F13883C334906@qq.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: a42e3c4de964 ("tracing/probe: Add immediate string parameter support")
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8c7224245557707c613f130431cafbaaa4889615 ]
kstrdup() returns NULL when some internal memory errors happen, it is
better to check the return value of it so to catch the memory error in
time.
Link: https://lkml.kernel.org/r/tencent_3C2E330722056D7891D2C83F29C802734B06@qq.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 33ea4b24277b ("perf/core: Implement the 'perf_uprobe' PMU")
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4f67cca70c0f615e9cfe6ac42244f3416ec60877 ]
synth_events is returning -EINVAL if the dyn_event create command does
not contain ' \t'. This prevents other systems from getting called back.
synth_events needs to return -ECANCELED in these cases when the command
is not targeting the synth_event system.
Link: https://lore.kernel.org/linux-trace-devel/20210930223821.11025-1-beaub@linux.microsoft.com
Fixes: c9e759b1e8456 ("tracing: Rework synthetic event command parsing")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e7f7c99ba911f56bc338845c1cd72954ba591707 ]
Recently while investigating a problem with rr and signals I noticed
that siglock is dropped in ptrace_signal and get_signal does not jump
to relock.
Looking farther to see if the problem is anywhere else I see that
do_signal_stop also returns if signal_group_exit is true. I believe
that test can now never be true, but it is a bit hard to trace
through and be certain.
Testing signal_group_exit is not expensive, so move the test for
signal_group_exit into the for loop inside of get_signal to ensure
the test is never skipped improperly.
This has been a potential problem since I added the test for
signal_group_exit was added.
Fixes: 35634ffa1751 ("signal: Always notice exiting tasks")
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/875yssekcd.fsf_-_@email.froward.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8f110f530635af44fff1f4ee100ecef0bac62510 ]
Due to the audit control mutex necessary for serializing audit
userspace messages we haven't been able to block/penalize userspace
processes that attempt to send audit records while the system is
under audit pressure. The result is that privileged userspace
applications have a priority boost with respect to audit as they are
not bound by the same audit queue throttling as the other tasks on
the system.
This patch attempts to restore some balance to the system when under
audit pressure by blocking these privileged userspace tasks after
they have finished their audit processing, and dropped the audit
control mutex, but before they return to userspace.
Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5ff7c9f9d7e3e0f6db5b81945fa11b69d62f433a ]
If we use the module stall_cpu option, we may get a soft lockup warning
in case we also don't pass the stall_cpu_block option.
Introduce the stall_no_softlockup option to avoid a soft lockup on
cpu stall even if we don't use the stall_cpu_block option.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cb0e52b7748737b2cf6481fdd9b920ce7e1ebbdf ]
We've noticed cases where tasks in a cgroup are stalled on memory but
there is little memory FULL pressure since tasks stay on the runqueue
in reclaim.
A simple example involves a single threaded program that keeps leaking
and touching large amounts of memory. It runs in a cgroup with swap
enabled, memory.high set at 10M and cpu.max ratio set at 5%. Though
there is significant CPU pressure and memory SOME, there is barely any
memory FULL since the task enters reclaim and stays on the runqueue.
However, this memory-bound task is effectively stalled on memory and
we expect memory FULL to match memory SOME in this scenario.
The code is confused about memstall && running, thinking there is a
stalled task and a productive task when there's only one task: a
reclaimer that's counted as both. To fix this, we redefine the
condition for PSI_MEM_FULL to check that all running tasks are in an
active memstall instead of checking that there are no running tasks.
case PSI_MEM_FULL:
- return unlikely(tasks[NR_MEMSTALL] && !tasks[NR_RUNNING]);
+ return unlikely(tasks[NR_MEMSTALL] &&
+ tasks[NR_RUNNING] == tasks[NR_MEMSTALL_RUNNING]);
This will capture reclaimers. It will also capture tasks that called
psi_memstall_enter() and are about to sleep, but this should be
negligible noise.
Signed-off-by: Brian Chen <brianchen118@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20211110213312.310243-1-brianchen118@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ebf7f6f0a6cdcc17a3da52b81e4b3a98c4005028 ]
In the current code, the actual max tail call count is 33 which is greater
than MAX_TAIL_CALL_CNT (defined as 32). The actual limit is not consistent
with the meaning of MAX_TAIL_CALL_CNT and thus confusing at first glance.
We can see the historical evolution from commit 04fd61ab36ec ("bpf: allow
bpf programs to tail-call other bpf programs") and commit f9dabe016b63
("bpf: Undo off-by-one in interpreter tail call count limit"). In order
to avoid changing existing behavior, the actual limit is 33 now, this is
reasonable.
After commit 874be05f525e ("bpf, tests: Add tail call test suite"), we can
see there exists failed testcase.
On all archs when CONFIG_BPF_JIT_ALWAYS_ON is not set:
# echo 0 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf
# dmesg | grep -w FAIL
Tail call error path, max count reached jited:0 ret 34 != 33 FAIL
On some archs:
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf
# dmesg | grep -w FAIL
Tail call error path, max count reached jited:1 ret 34 != 33 FAIL
Although the above failed testcase has been fixed in commit 18935a72eb25
("bpf/tests: Fix error in tail call limit tests"), it would still be good
to change the value of MAX_TAIL_CALL_CNT from 32 to 33 to make the code
more readable.
The 32-bit x86 JIT was using a limit of 32, just fix the wrong comments and
limit to 33 tail calls as the constant MAX_TAIL_CALL_CNT updated. For the
mips64 JIT, use "ori" instead of "addiu" as suggested by Johan Almbladh.
For the riscv JIT, use RV_REG_TCC directly to save one register move as
suggested by Björn Töpel. For the other implementations, no function changes,
it does not change the current limit 33, the new value of MAX_TAIL_CALL_CNT
can reflect the actual max tail call count, the related tail call testcases
in test_bpf module and selftests can work well for the interpreter and the
JIT.
Here are the test results on x86_64:
# uname -m
x86_64
# echo 0 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf test_suite=test_tail_calls
# dmesg | tail -1
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [0/8 JIT'ed]
# rmmod test_bpf
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf test_suite=test_tail_calls
# dmesg | tail -1
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [8/8 JIT'ed]
# rmmod test_bpf
# ./test_progs -t tailcalls
#142 tailcalls:OK
Summary: 1/11 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/1636075800-3264-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c86ff8c55b8ae68837b2fa59dc0c203907e9a15f ]
Since commit db3a34e17433 ("clocksource: Retry clock read if long delays
detected") and commit 2e27e793e280 ("clocksource: Reduce clocksource-skew
threshold"), it is found that tsc clocksource fallback to hpet can
sometimes happen on both Intel and AMD systems especially when they are
running stressful benchmarking workloads. Of the 23 systems tested with
a v5.14 kernel, 10 of them have switched to hpet clock source during
the test run.
The result of falling back to hpet is a drastic reduction of performance
when running benchmarks. For example, the fio performance tests can
drop up to 70% whereas the iperf3 performance can drop up to 80%.
4 hpet fallbacks happened during bootup. They were:
[ 8.749399] clocksource: timekeeping watchdog on CPU13: hpet read-back delay of 263750ns, attempt 4, marking unstable
[ 12.044610] clocksource: timekeeping watchdog on CPU19: hpet read-back delay of 186166ns, attempt 4, marking unstable
[ 17.336941] clocksource: timekeeping watchdog on CPU28: hpet read-back delay of 182291ns, attempt 4, marking unstable
[ 17.518565] clocksource: timekeeping watchdog on CPU34: hpet read-back delay of 252196ns, attempt 4, marking unstable
Other fallbacks happen when the systems were running stressful
benchmarks. For example:
[ 2685.867873] clocksource: timekeeping watchdog on CPU117: hpet read-back delay of 57269ns, attempt 4, marking unstable
[46215.471228] clocksource: timekeeping watchdog on CPU8: hpet read-back delay of 61460ns, attempt 4, marking unstable
Commit 2e27e793e280 ("clocksource: Reduce clocksource-skew threshold"),
changed the skew margin from 100us to 50us. I think this is too small
and can easily be exceeded when running some stressful workloads on a
thermally stressed system. So it is switched back to 100us.
Even a maximum skew margin of 100us may be too small in for some systems
when booting up especially if those systems are under thermal stress. To
eliminate the case that the large skew is due to the system being too
busy slowing down the reading of both the watchdog and the clocksource,
an extra consecutive read of watchdog clock is being done to check this.
The consecutive watchdog read delay is compared against
WATCHDOG_MAX_SKEW/2. If the delay exceeds the limit, we assume that
the system is just too busy. A warning will be printed to the console
and the clock skew check is skipped for this round.
Fixes: db3a34e17433 ("clocksource: Retry clock read if long delays detected")
Fixes: 2e27e793e280 ("clocksource: Reduce clocksource-skew threshold")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a5bebc4f00dee47113eed48098c68e88b5ba70e8 ]
Commit bfc6bb74e4f1 ("bpf: Implement verifier support for validation of async callbacks.")
added support for BPF_FUNC_timer_set_callback to
the __check_func_call() function. The test in __check_func_call() is
flaweed because it can mis-interpret a regular BPF-to-BPF pseudo-call
as a BPF_FUNC_timer_set_callback callback call.
Consider the conditional in the code:
if (insn->code == (BPF_JMP | BPF_CALL) &&
insn->imm == BPF_FUNC_timer_set_callback) {
The BPF_FUNC_timer_set_callback has value 170. This means that if you
have a BPF program that contains a pseudo-call with an instruction delta
of 170, this conditional will be found to be true by the verifier, and
it will interpret the pseudo-call as a callback. This leads to a mess
with the verification of the program because it makes the wrong
assumptions about the nature of this call.
Solution: include an explicit check to ensure that insn->src_reg == 0.
This ensures that calls cannot be mis-interpreted as an async callback
call.
Fixes: bfc6bb74e4f1 ("bpf: Implement verifier support for validation of async callbacks.")
Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220105210150.GH1559@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e60b0d12a95dcf16a63225cead4541567f5cb517 ]
If we ever get to a point again where we convert a bogus looking <ptr>_or_null
typed register containing a non-zero fixed or variable offset, then lets not
reset these bounds to zero since they are not and also don't promote the register
to a <ptr> type, but instead leave it as <ptr>_or_null. Converting to a unknown
register could be an avenue as well, but then if we run into this case it would
allow to leak a kernel pointer this way.
Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3ccdcee28415c4226de05438b4d89eb5514edf73 ]
Without it, kernel crashes in map_get_next_key().
Fixes: 9330986c0300 ("bpf: Add bloom filter map implementation")
Reported-by: TCS Robot <tcs_robot@tencent.com>
Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Joanne Koong <joannekoong@fb.com>
Link: https://lore.kernel.org/bpf/1640776802-22421-1-git-send-email-tcs.kernel@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 81f6d49cce2d2fe507e3fddcc4a6db021d9c2e7b ]
Expedited RCU grace periods invoke sync_rcu_exp_select_node_cpus(), which
takes two passes over the leaf rcu_node structure's CPUs. The first
pass gathers up the current CPU and CPUs that are in dynticks idle mode.
The workqueue will report a quiescent state on their behalf later.
The second pass sends IPIs to the rest of the CPUs, but excludes the
current CPU, incorrectly assuming it has been included in the first
pass's list of CPUs.
Unfortunately the current CPU may have changed between the first and
second pass, due to the fact that the various rcu_node structures'
->lock fields have been dropped, thus momentarily enabling preemption.
This means that if the second pass's CPU was not on the first pass's
list, it will be ignored completely. There will be no IPI sent to
it, and there will be no reporting of quiescent states on its behalf.
Unfortunately, the expedited grace period will nevertheless be waiting
for that CPU to report a quiescent state, but with that CPU having no
reason to believe that such a report is needed.
The result will be an expedited grace period stall.
Fix this by no longer excluding the current CPU from consideration during
the second pass.
Fixes: b9ad4d6ed18e ("rcu: Avoid self-IPI in sync_rcu_exp_select_node_cpus()")
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9b58e976b3b391c0cf02e038d53dd0478ed3013c ]
When rt_runtime is modified from -1 to a valid control value, it may
cause the task to be throttled all the time. Operations like the following
will trigger the bug. E.g:
1. echo -1 > /proc/sys/kernel/sched_rt_runtime_us
2. Run a FIFO task named A that executes while(1)
3. echo 950000 > /proc/sys/kernel/sched_rt_runtime_us
When rt_runtime is -1, The rt period timer will not be activated when task
A enqueued. And then the task will be throttled after setting rt_runtime to
950,000. The task will always be throttled because the rt period timer is
not activated.
Fixes: d0b27fa77854 ("sched: rt-group: synchonised bandwidth period")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Li Hua <hucool.lihua@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211203033618.11895-1-hucool.lihua@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit db52f57211b4e45f0ebb274e2c877b211dc18591 ]
Branch data available to BPF programs can be very useful to get stack traces
out of userspace application.
Commit fff7b64355ea ("bpf: Add bpf_read_branch_records() helper") added BPF
support to capture branch records in x86. Enable this feature also for other
architectures as well by removing checks specific to x86.
If an architecture doesn't support branch records, bpf_read_branch_records()
still has appropriate checks and it will return an -EINVAL in that scenario.
Based on UAPI helper doc in include/uapi/linux/bpf.h, unsupported architectures
should return -ENOENT in such case. Hence, update the appropriate check to
return -ENOENT instead.
Selftest 'perf_branches' result on power9 machine which has the branch stacks
support:
- Before this patch:
[command]# ./test_progs -t perf_branches
#88/1 perf_branches/perf_branches_hw:FAIL
#88/2 perf_branches/perf_branches_no_hw:OK
#88 perf_branches:FAIL
Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED
- After this patch:
[command]# ./test_progs -t perf_branches
#88/1 perf_branches/perf_branches_hw:OK
#88/2 perf_branches/perf_branches_no_hw:OK
#88 perf_branches:OK
Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED
Selftest 'perf_branches' result on power9 machine which doesn't have branch
stack report:
- After this patch:
[command]# ./test_progs -t perf_branches
#88/1 perf_branches/perf_branches_hw:SKIP
#88/2 perf_branches/perf_branches_no_hw:OK
#88 perf_branches:OK
Summary: 1/1 PASSED, 1 SKIPPED, 0 FAILED
Fixes: fff7b64355eac ("bpf: Add bpf_read_branch_records() helper")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211206073315.77432-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 866de407444398bc8140ea70de1dba5f91cc34ac ]
BPF_LOG_KERNEL is only used internally, so disallow bpf_btf_load()
to set log level as BPF_LOG_KERNEL. The same checking has already
been done in bpf_check(), so factor out a helper to check the
validity of log attributes and use it in both places.
Fixes: 8580ac9404f6 ("bpf: Process in-kernel BTF")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211203053001.740945-1-houtao1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c5a2d43e998a821701029f23e25b62f9188e93ff ]
Make BTF log size limit to be the same as the verifier log size limit.
Otherwise tools that progressively increase log size and use the same log
for BTF loading and program loading will be hitting hard to debug EINVAL.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211201181040.23337-7-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 014ba44e8184e1acf93e0cbb7089ee847802f8f0 ]
select_idle_sibling() has a special case for tasks woken up by a per-CPU
kthread where the selected CPU is the previous one. For asymmetric CPU
capacity systems, the assumption was that the wakee couldn't have a
bigger utilization during task placement than it used to have during the
last activation. That was not considering uclamp.min which can completely
change between two task activations and as a consequence mandates the
fitness criterion asym_fits_capacity(), even for the exit path described
above.
Fixes: b4c9c9f15649 ("sched/fair: Prefer prev cpu in asymmetric wakeup path")
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20211129173115.4006346-1-vincent.donnefort@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8b4e74ccb582797f6f0b0a50372ebd9fd2372a27 ]
select_idle_sibling() has a special case for tasks woken up by a per-CPU
kthread, where the selected CPU is the previous one. However, the current
condition for this exit path is incomplete. A task can wake up from an
interrupt context (e.g. hrtimer), while a per-CPU kthread is running. A
such scenario would spuriously trigger the special case described above.
Also, a recent change made the idle task like a regular per-CPU kthread,
hence making that situation more likely to happen
(is_per_cpu_kthread(swapper) being true now).
Checking for task context makes sure select_idle_sibling() will not
interpret a wake up from any other context as a wake up by a per-CPU
kthread.
Fixes: 52262ee567ad ("sched/fair: Allow a per-CPU kthread waking a task to stack on the same CPU, to fix XFS performance regression")
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lore.kernel.org/r/20211201143450.479472-1-vincent.donnefort@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 300c0c5e721834f484b03fa3062602dd8ff48413 ]
The default kasan_record_aux_stack() calls stack_depot_save() with GFP_NOWAIT,
which in turn can then call alloc_pages(GFP_NOWAIT, ...). In general, however,
it is not even possible to use either GFP_ATOMIC nor GFP_NOWAIT in certain
non-preemptive contexts/RT kernel including raw_spin_locks (see gfp.h and ab00db216c9c7).
Fix it by instructing stackdepot to not expand stack storage via alloc_pages()
in case it runs out by using kasan_record_aux_stack_noalloc().
Jianwei Hu reported:
BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:969
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 15319, name: python3
INFO: lockdep is turned off.
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffffffff856c8b13>] copy_process+0xaf3/0x2590
softirqs last enabled at (0): [<ffffffff856c8b13>] copy_process+0xaf3/0x2590
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 6 PID: 15319 Comm: python3 Tainted: G W O 5.15-rc7-preempt-rt #1
Hardware name: Supermicro SYS-E300-9A-8C/A2SDi-8C-HLN4F, BIOS 1.1b 12/17/2018
Call Trace:
show_stack+0x52/0x58
dump_stack+0xa1/0xd6
___might_sleep.cold+0x11c/0x12d
rt_spin_lock+0x3f/0xc0
rmqueue+0x100/0x1460
rmqueue+0x100/0x1460
mark_usage+0x1a0/0x1a0
ftrace_graph_ret_addr+0x2a/0xb0
rmqueue_pcplist.constprop.0+0x6a0/0x6a0
__kasan_check_read+0x11/0x20
__zone_watermark_ok+0x114/0x270
get_page_from_freelist+0x148/0x630
is_module_text_address+0x32/0xa0
__alloc_pages_nodemask+0x2f6/0x790
__alloc_pages_slowpath.constprop.0+0x12d0/0x12d0
create_prof_cpu_mask+0x30/0x30
alloc_pages_current+0xb1/0x150
stack_depot_save+0x39f/0x490
kasan_save_stack+0x42/0x50
kasan_save_stack+0x23/0x50
kasan_record_aux_stack+0xa9/0xc0
__call_rcu+0xff/0x9c0
call_rcu+0xe/0x10
put_object+0x53/0x70
__delete_object+0x7b/0x90
kmemleak_free+0x46/0x70
slab_free_freelist_hook+0xb4/0x160
kfree+0xe5/0x420
kfree_const+0x17/0x30
kobject_cleanup+0xaa/0x230
kobject_put+0x76/0x90
netdev_queue_update_kobjects+0x17d/0x1f0
... ...
ksys_write+0xd9/0x180
__x64_sys_write+0x42/0x50
do_syscall_64+0x38/0x50
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Links: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/include/linux/kasan.h?id=7cb3007ce2da27ec02a1a3211941e7fe6875b642
Fixes: 84109ab58590 ("rcu: Record kvfree_call_rcu() call stack for KASAN")
Fixes: 26e760c9a7c8 ("rcu: kasan: record and print call_rcu() call stack")
Reported-by: Jianwei Hu <jianwei.hu@windriver.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Marco Elver <elver@google.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Jun Miao <jun.miao@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2202e15b2b1a946ce760d96748cd7477589701ab ]
mutex_acquire_nest() expects a pointer, pass the pointer.
Fixes: 12235da8c80a1 ("kernel/locking: Add context to ww_mutex_trylock()")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211104122706.frk52zxbjorso2kv@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a674e48c5443d12a8a43c3ac42367aa39505d506 upstream.
Currently three dma atomic pools are initialized as long as the relevant
kernel codes are built in. While in kdump kernel of x86_64, this is not
right when trying to create atomic_pool_dma, because there's no managed
pages in DMA zone. In the case, DMA zone only has low 1M memory
presented and locked down by memblock allocator. So no pages are added
into buddy of DMA zone. Please check commit f1d4d47c5851 ("x86/setup:
Always reserve the first 1M of RAM").
Then in kdump kernel of x86_64, it always prints below failure message:
DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
swapper/0: page allocation failure: order:5, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-0.rc5.20210611git929d931f2b40.42.fc35.x86_64 #1
Hardware name: Dell Inc. PowerEdge R910/0P658H, BIOS 2.12.0 06/04/2018
Call Trace:
dump_stack+0x7f/0xa1
warn_alloc.cold+0x72/0xd6
__alloc_pages_slowpath.constprop.0+0xf29/0xf50
__alloc_pages+0x24d/0x2c0
alloc_page_interleave+0x13/0xb0
atomic_pool_expand+0x118/0x210
__dma_atomic_pool_init+0x45/0x93
dma_atomic_pool_init+0xdb/0x176
do_one_initcall+0x67/0x320
kernel_init_freeable+0x290/0x2dc
kernel_init+0xa/0x111
ret_from_fork+0x22/0x30
Mem-Info:
......
DMA: failed to allocate 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocation
DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Here, let's check if DMA zone has managed pages, then create
atomic_pool_dma if yes. Otherwise just skip it.
Link: https://lkml.kernel.org/r/20211223094435.248523-3-bhe@redhat.com
Fixes: 6f599d84231f ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ff083a2d972f56bebfd82409ca62e5dfce950961 upstream.
Protect perf_guest_cbs with RCU to fix multiple possible errors. Luckily,
all paths that read perf_guest_cbs already require RCU protection, e.g. to
protect the callback chains, so only the direct perf_guest_cbs touchpoints
need to be modified.
Bug #1 is a simple lack of WRITE_ONCE/READ_ONCE behavior to ensure
perf_guest_cbs isn't reloaded between a !NULL check and a dereference.
Fixed via the READ_ONCE() in rcu_dereference().
Bug #2 is that on weakly-ordered architectures, updates to the callbacks
themselves are not guaranteed to be visible before the pointer is made
visible to readers. Fixed by the smp_store_release() in
rcu_assign_pointer() when the new pointer is non-NULL.
Bug #3 is that, because the callbacks are global, it's possible for
readers to run in parallel with an unregisters, and thus a module
implementing the callbacks can be unloaded while readers are in flight,
resulting in a use-after-free. Fixed by a synchronize_rcu() call when
unregistering callbacks.
Bug #1 escaped notice because it's extremely unlikely a compiler will
reload perf_guest_cbs in this sequence. perf_guest_cbs does get reloaded
for future derefs, e.g. for ->is_user_mode(), but the ->is_in_guest()
guard all but guarantees the consumer will win the race, e.g. to nullify
perf_guest_cbs, KVM has to completely exit the guest and teardown down
all VMs before KVM start its module unload / unregister sequence. This
also makes it all but impossible to encounter bug #3.
Bug #2 has not been a problem because all architectures that register
callbacks are strongly ordered and/or have a static set of callbacks.
But with help, unloading kvm_intel can trigger bug #1 e.g. wrapping
perf_guest_cbs with READ_ONCE in perf_misc_flags() while spamming
kvm_intel module load/unload leads to:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 6 PID: 1825 Comm: stress Not tainted 5.14.0-rc2+ #459
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:perf_misc_flags+0x1c/0x70
Call Trace:
perf_prepare_sample+0x53/0x6b0
perf_event_output_forward+0x67/0x160
__perf_event_overflow+0x52/0xf0
handle_pmi_common+0x207/0x300
intel_pmu_handle_irq+0xcf/0x410
perf_event_nmi_handler+0x28/0x50
nmi_handle+0xc7/0x260
default_do_nmi+0x6b/0x170
exc_nmi+0x103/0x130
asm_exc_nmi+0x76/0xbf
Fixes: 39447b386c84 ("perf: Enhance perf to allow for guest statistic collection from host")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211111020738.2512932-2-seanjc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ no upstream commit given implicitly fixed through the larger refactoring
in c25b2ae136039ffa820c26138ed4a5e5f3ab3841 ]
While auditing some other code, I noticed missing checks inside the pointer
arithmetic simulation, more specifically, adjust_ptr_min_max_vals(). Several
*_OR_NULL types are not rejected whereas they are _required_ to be rejected
given the expectation is that they get promoted into a 'real' pointer type
for the success case, that is, after an explicit != NULL check.
One case which stands out and is accessible from unprivileged (iff enabled
given disabled by default) is BPF ring buffer. From crafting a PoC, the NULL
check can be bypassed through an offset, and its id marking will then lead
to promotion of mem_or_null to a mem type.
bpf_ringbuf_reserve() helper can trigger this case through passing of reserved
flags, for example.
func#0 @0
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (7a) *(u64 *)(r10 -8) = 0
1: R1=ctx(id=0,off=0,imm=0) R10=fp0 fp-8_w=mmmmmmmm
1: (18) r1 = 0x0
3: R1_w=map_ptr(id=0,off=0,ks=0,vs=0,imm=0) R10=fp0 fp-8_w=mmmmmmmm
3: (b7) r2 = 8
4: R1_w=map_ptr(id=0,off=0,ks=0,vs=0,imm=0) R2_w=invP8 R10=fp0 fp-8_w=mmmmmmmm
4: (b7) r3 = 0
5: R1_w=map_ptr(id=0,off=0,ks=0,vs=0,imm=0) R2_w=invP8 R3_w=invP0 R10=fp0 fp-8_w=mmmmmmmm
5: (85) call bpf_ringbuf_reserve#131
6: R0_w=mem_or_null(id=2,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8_w=mmmmmmmm refs=2
6: (bf) r6 = r0
7: R0_w=mem_or_null(id=2,ref_obj_id=2,off=0,imm=0) R6_w=mem_or_null(id=2,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8_w=mmmmmmmm refs=2
7: (07) r0 += 1
8: R0_w=mem_or_null(id=2,ref_obj_id=2,off=1,imm=0) R6_w=mem_or_null(id=2,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8_w=mmmmmmmm refs=2
8: (15) if r0 == 0x0 goto pc+4
R0_w=mem(id=0,ref_obj_id=0,off=0,imm=0) R6_w=mem(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8_w=mmmmmmmm refs=2
9: R0_w=mem(id=0,ref_obj_id=0,off=0,imm=0) R6_w=mem(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8_w=mmmmmmmm refs=2
9: (62) *(u32 *)(r6 +0) = 0
R0_w=mem(id=0,ref_obj_id=0,off=0,imm=0) R6_w=mem(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8_w=mmmmmmmm refs=2
10: R0_w=mem(id=0,ref_obj_id=0,off=0,imm=0) R6_w=mem(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8_w=mmmmmmmm refs=2
10: (bf) r1 = r6
11: R0_w=mem(id=0,ref_obj_id=0,off=0,imm=0) R1_w=mem(id=0,ref_obj_id=2,off=0,imm=0) R6_w=mem(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8_w=mmmmmmmm refs=2
11: (b7) r2 = 0
12: R0_w=mem(id=0,ref_obj_id=0,off=0,imm=0) R1_w=mem(id=0,ref_obj_id=2,off=0,imm=0) R2_w=invP0 R6_w=mem(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8_w=mmmmmmmm refs=2
12: (85) call bpf_ringbuf_submit#132
13: R6=invP(id=0) R10=fp0 fp-8=mmmmmmmm
13: (b7) r0 = 0
14: R0_w=invP0 R6=invP(id=0) R10=fp0 fp-8=mmmmmmmm
14: (95) exit
from 8 to 13: safe
processed 15 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 0
OK
All three commits, that is b121b341e598 ("bpf: Add PTR_TO_BTF_ID_OR_NULL support"),
457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it"), and the
afbf21dce668 ("bpf: Support readonly/readwrite buffers in verifier") suffer the same
cause and their *_OR_NULL type pendants must be rejected in adjust_ptr_min_max_vals().
Make the test more robust by reusing reg_type_may_be_null() helper such that we catch
all *_OR_NULL types we have today and in future.
Note that pointer arithmetic on PTR_TO_BTF_ID, PTR_TO_RDONLY_BUF, and PTR_TO_RDWR_BUF
is generally allowed.
Fixes: b121b341e598 ("bpf: Add PTR_TO_BTF_ID_OR_NULL support")
Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Fixes: afbf21dce668 ("bpf: Support readonly/readwrite buffers in verifier")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 45c753f5f24d2d4717acb38ce35e604ff9abcb50 upstream.
At CPU-hotplug time, unbind_workers() may preempt a worker while it is
going to sleep. In that case the following scenario can happen:
unbind_workers() wq_worker_sleeping()
-------------- -------------------
if (worker->flags & WORKER_NOT_RUNNING)
return;
//PREEMPTED by unbind_workers
worker->flags |= WORKER_UNBOUND;
[...]
atomic_set(&pool->nr_running, 0);
//resume to worker
atomic_dec_and_test(&pool->nr_running);
After unbind_worker() resets pool->nr_running, the value is expected to
remain 0 until the pool ever gets rebound in case cpu_up() is called on
the target CPU in the future. But here the race leaves pool->nr_running
with a value of -1, triggering the following warning when the worker goes
idle:
WARNING: CPU: 3 PID: 34 at kernel/workqueue.c:1823 worker_enter_idle+0x95/0xc0
Modules linked in:
CPU: 3 PID: 34 Comm: kworker/3:0 Not tainted 5.16.0-rc1+ #34
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
Workqueue: 0x0 (rcu_par_gp)
RIP: 0010:worker_enter_idle+0x95/0xc0
Code: 04 85 f8 ff ff ff 39 c1 7f 09 48 8b 43 50 48 85 c0 74 1b 83 e2 04 75 99 8b 43 34 39 43 30 75 91 8b 83 00 03 00 00 85 c0 74 87 <0f> 0b 5b c3 48 8b 35 70 f1 37 01 48 8d 7b 48 48 81 c6 e0 93 0
RSP: 0000:ffff9b7680277ed0 EFLAGS: 00010086
RAX: 00000000ffffffff RBX: ffff93465eae9c00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9346418a0000 RDI: ffff934641057140
RBP: ffff934641057170 R08: 0000000000000001 R09: ffff9346418a0080
R10: ffff9b768027fdf0 R11: 0000000000002400 R12: ffff93465eae9c20
R13: ffff93465eae9c20 R14: ffff93465eae9c70 R15: ffff934641057140
FS: 0000000000000000(0000) GS:ffff93465eac0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000001cc0c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
worker_thread+0x89/0x3d0
? process_one_work+0x400/0x400
kthread+0x162/0x190
? set_kthread_struct+0x40/0x40
ret_from_fork+0x22/0x30
</TASK>
Also due to this incorrect "nr_running == -1", all sorts of hazards can
happen, starting with queued works being ignored because no workers are
awaken at insert_work() time.
Fix this with checking again the worker flags while pool->lock is locked.
Fixes: b945efcdd07d ("sched: Remove pointless preemption disable in sched_submit_work()")
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 07edfece8bcb0580a1828d939e6f8d91a8603eb2 upstream.
At CPU-hotplug time, unbind_worker() may preempt a worker while it is
waking up. In that case the following scenario can happen:
unbind_workers() wq_worker_running()
-------------- -------------------
if (!(worker->flags & WORKER_NOT_RUNNING))
//PREEMPTED by unbind_workers
worker->flags |= WORKER_UNBOUND;
[...]
atomic_set(&pool->nr_running, 0);
//resume to worker
atomic_inc(&worker->pool->nr_running);
After unbind_worker() resets pool->nr_running, the value is expected to
remain 0 until the pool ever gets rebound in case cpu_up() is called on
the target CPU in the future. But here the race leaves pool->nr_running
with a value of 1, triggering the following warning when the worker goes
idle:
WARNING: CPU: 3 PID: 34 at kernel/workqueue.c:1823 worker_enter_idle+0x95/0xc0
Modules linked in:
CPU: 3 PID: 34 Comm: kworker/3:0 Not tainted 5.16.0-rc1+ #34
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
Workqueue: 0x0 (rcu_par_gp)
RIP: 0010:worker_enter_idle+0x95/0xc0
Code: 04 85 f8 ff ff ff 39 c1 7f 09 48 8b 43 50 48 85 c0 74 1b 83 e2 04 75 99 8b 43 34 39 43 30 75 91 8b 83 00 03 00 00 85 c0 74 87 <0f> 0b 5b c3 48 8b 35 70 f1 37 01 48 8d 7b 48 48 81 c6 e0 93 0
RSP: 0000:ffff9b7680277ed0 EFLAGS: 00010086
RAX: 00000000ffffffff RBX: ffff93465eae9c00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9346418a0000 RDI: ffff934641057140
RBP: ffff934641057170 R08: 0000000000000001 R09: ffff9346418a0080
R10: ffff9b768027fdf0 R11: 0000000000002400 R12: ffff93465eae9c20
R13: ffff93465eae9c20 R14: ffff93465eae9c70 R15: ffff934641057140
FS: 0000000000000000(0000) GS:ffff93465eac0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000001cc0c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
worker_thread+0x89/0x3d0
? process_one_work+0x400/0x400
kthread+0x162/0x190
? set_kthread_struct+0x40/0x40
ret_from_fork+0x22/0x30
</TASK>
Also due to this incorrect "nr_running == 1", further queued work may
end up not being served, because no worker is awaken at work insert time.
This raises rcutorture writer stalls for example.
Fix this with disabling preemption in the right place in
wq_worker_running().
It's worth noting that if the worker migrates and runs concurrently with
unbind_workers(), it is guaranteed to see the WORKER_UNBOUND flag update
due to set_cpus_allowed_ptr() acquiring/releasing rq->lock.
Fixes: 6d25be5782e4 ("sched/core, workqueues: Distangle worker accounting from rq lock")
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"This contains the cgroup.procs permission check fixes so that they use
the credentials at the time of open rather than write, which also
fixes the cgroup namespace lifetime bug"
* 'for-5.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
selftests: cgroup: Test open-time cgroup namespace usage for migration checks
selftests: cgroup: Test open-time credential usage for migration checks
selftests: cgroup: Make cg_create() use 0755 for permission instead of 0644
cgroup: Use open-time cgroup namespace for process migration perm checks
cgroup: Allocate cgroup_file_ctx for kernfs_open_file->priv
cgroup: Use open-time credentials for process migraton perm checks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Three minor tracing fixes:
- Fix missing prototypes in sample module for direct functions
- Fix check of valid buffer in get_trace_buf()
- Fix annotations of percpu pointers"
* tag 'trace-v5.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Tag trace_percpu_buffer as a percpu pointer
tracing: Fix check for trace_percpu_buffer validity in get_trace_buf()
ftrace/samples: Add missing prototypes direct functions
|
|
cgroup process migration permission checks are performed at write time as
whether a given operation is allowed or not is dependent on the content of
the write - the PID. This currently uses current's cgroup namespace which is
a potential security weakness as it may allow scenarios where a less
privileged process tricks a more privileged one into writing into a fd that
it created.
This patch makes cgroup remember the cgroup namespace at the time of open
and uses it for migration permission checks instad of current's. Note that
this only applies to cgroup2 as cgroup1 doesn't have namespace support.
This also fixes a use-after-free bug on cgroupns reported in
https://lore.kernel.org/r/00000000000048c15c05d0083397@google.com
Note that backporting this fix also requires the preceding patch.
Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reported-by: syzbot+50f5cf33a284ce738b62@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/00000000000048c15c05d0083397@google.com
Fixes: 5136f6365ce3 ("cgroup: implement "nsdelegate" mount option")
Signed-off-by: Tejun Heo <tj@kernel.org>
|
