| Age | Commit message (Collapse) | Author |
|---|
|
commit b10545b6b86b7a0b3e26b4c2a5c99b72d49bc4de upstream.
The kernel test robot reported that the find_module() is not available
if CONFIG_MODULES=n.
Fix this error by hiding find_modules() in #ifdef CONFIG_MODULES with
related rcu locks as try_module_get_by_name().
Link: https://lore.kernel.org/all/172056819167.201571.250053007194508038.stgit@devnote2/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407070744.RcLkn8sq-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202407070917.VVUCBlaS-lkp@intel.com/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit af178143343028fdec9d5960a22d17f5587fd3f5 upstream.
To fix some critical section races, the interface_lock was added to a few
locations. One of those locations was above where the interface_lock was
declared, so the declaration was moved up before that usage.
Unfortunately, where it was placed was inside a CONFIG_TIMERLAT_TRACER
ifdef block. As the interface_lock is used outside that config, this broke
the build when CONFIG_OSNOISE_TRACER was enabled but
CONFIG_TIMERLAT_TRACER was not.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Helena Anna" <helena.anna.dubel@intel.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/20240909103231.23a289e2@gandalf.local.home
Fixes: e6a53481da29 ("tracing/timerlat: Only clear timer if a kthread exists")
Reported-by: "Bityutskiy, Artem" <artem.bityutskiy@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ff0ce721ec213499ec5a532041fb3a1db2dc5ecb ]
It was found that some hotplug operations may cause multiple
rebuild_sched_domains_locked() calls. Some of those intermediate calls
may use cpuset states not in the final correct form leading to incorrect
sched domain setting.
Fix this problem by using the existing force_rebuild flag to inhibit
immediate rebuild_sched_domains_locked() calls if set and only doing
one final call at the end. Also renaming the force_rebuild flag to
force_sd_rebuild to make its meaning for clear.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 98f887f820c993e05a12e8aa816c80b8661d4c87 ]
On a ~2000 CPU powerpc system, hard lockups have been observed in the
workqueue code when stop_machine runs (in this case due to CPU hotplug).
This is due to lots of CPUs spinning in multi_cpu_stop, calling
touch_nmi_watchdog() which ends up calling wq_watchdog_touch().
wq_watchdog_touch() writes to the global variable wq_watchdog_touched,
and that can find itself in the same cacheline as other important
workqueue data, which slows down operations to the point of lockups.
In the case of the following abridged trace, worker_pool_idr was in
the hot line, causing the lockups to always appear at idr_find.
watchdog: CPU 1125 self-detected hard LOCKUP @ idr_find
Call Trace:
get_work_pool
__queue_work
call_timer_fn
run_timer_softirq
__do_softirq
do_softirq_own_stack
irq_exit
timer_interrupt
decrementer_common_virt
* interrupt: 900 (timer) at multi_cpu_stop
multi_cpu_stop
cpu_stopper_thread
smpboot_thread_fn
kthread
Fix this by having wq_watchdog_touch() only write to the line if the
last time a touch was recorded exceeds 1/4 of the watchdog threshold.
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 18e24deb1cc92f2068ce7434a94233741fbd7771 ]
Warn in the case it is called with cpu == -1. This does not appear
to happen anywhere.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Stable-dep-of: 98f887f820c9 ("workqueue: Improve scalability of workqueue watchdog touch")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2ab9d830262c132ab5db2f571003d80850d56b2a upstream.
Ole reported that event->mmap_mutex is strictly insufficient to
serialize the AUX buffer, add a per RB mutex to fully serialize it.
Note that in the lock order comment the perf_event::mmap_mutex order
was already wrong, that is, it nesting under mmap_lock is not new with
this patch.
Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams")
Reported-by: Ole <ole@binarygecko.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e240b0fde52f33670d1336697c22d90a4fe33c84 upstream.
To prevent unitialized members, use kzalloc to allocate
the xol area.
Fixes: b059a453b1cf1 ("x86/vdso: Add mremap hook to vm_special_mapping")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240903102313.3402529-1-svens@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 77aeb1b685f9db73d276bad4bb30d48505a6fd23 ]
For CONFIG_DEBUG_OBJECTS_WORK=y kernels sscs.work defined by
INIT_WORK_ONSTACK() is initialized by debug_object_init_on_stack() for
the debug check in __init_work() to work correctly.
But this lacks the counterpart to remove the tracked object from debug
objects again, which will cause a debug object warning once the stack is
freed.
Add the missing destroy_work_on_stack() invocation to cure that.
[ tglx: Massaged changelog ]
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240704065213.13559-1-qiang.zhang1211@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 54624acf8843375a6de3717ac18df3b5104c39c5 ]
The test thread will start N benchmark kthreads and then schedule out
until the test time finished and notify the benchmark kthreads to stop.
The benchmark kthreads will keep running until notified to stop.
There's a problem with current implementation when the benchmark
kthreads number is equal to the CPUs on a non-preemptible kernel:
since the scheduler will balance the kthreads across the CPUs and
when the test time's out the test thread won't get a chance to be
scheduled on any CPU then cannot notify the benchmark kthreads to stop.
This can be easily reproduced on a VM (simulated with 16 CPUs) with
PREEMPT_VOLUNTARY:
estuary:/mnt$ ./dma_map_benchmark -t 16 -s 1
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 10-...!: (5221 ticks this GP) idle=ed24/1/0x4000000000000000 softirq=142/142 fqs=0
rcu: (t=5254 jiffies g=-559 q=45 ncpus=16)
rcu: rcu_sched kthread starved for 5255 jiffies! g-559 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=12
rcu: Unless rcu_sched kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_sched state:R running task stack:0 pid:16 tgid:16 ppid:2 flags:0x00000008
Call trace
__switch_to+0xec/0x138
__schedule+0x2f8/0x1080
schedule+0x30/0x130
schedule_timeout+0xa0/0x188
rcu_gp_fqs_loop+0x128/0x528
rcu_gp_kthread+0x1c8/0x208
kthread+0xec/0xf8
ret_from_fork+0x10/0x20
Sending NMI from CPU 10 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 332 Comm: dma-map-benchma Not tainted 6.10.0-rc1-vanilla-LSE #8
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : arm_smmu_cmdq_issue_cmdlist+0x218/0x730
lr : arm_smmu_cmdq_issue_cmdlist+0x488/0x730
sp : ffff80008748b630
x29: ffff80008748b630 x28: 0000000000000000 x27: ffff80008748b780
x26: 0000000000000000 x25: 000000000000bc70 x24: 000000000001bc70
x23: ffff0000c12af080 x22: 0000000000010000 x21: 000000000000ffff
x20: ffff80008748b700 x19: ffff0000c12af0c0 x18: 0000000000010000
x17: 0000000000000001 x16: 0000000000000040 x15: ffffffffffffffff
x14: 0001ffffffffffff x13: 000000000000ffff x12: 00000000000002f1
x11: 000000000001ffff x10: 0000000000000031 x9 : ffff800080b6b0b8
x8 : ffff0000c2a48000 x7 : 000000000001bc71 x6 : 0001800000000000
x5 : 00000000000002f1 x4 : 01ffffffffffffff x3 : 000000000009aaf1
x2 : 0000000000000018 x1 : 000000000000000f x0 : ffff0000c12af18c
Call trace:
arm_smmu_cmdq_issue_cmdlist+0x218/0x730
__arm_smmu_tlb_inv_range+0xe0/0x1a8
arm_smmu_iotlb_sync+0xc0/0x128
__iommu_dma_unmap+0x248/0x320
iommu_dma_unmap_page+0x5c/0xe8
dma_unmap_page_attrs+0x38/0x1d0
map_benchmark_thread+0x118/0x2c0
kthread+0xec/0xf8
ret_from_fork+0x10/0x20
Solve this by adding scheduling point in the kthread loop,
so if there're other threads in the system they may have
a chance to run, especially the thread to notify the test
end. However this may degrade the test concurrency so it's
recommended to run this on an idle system.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9d8616034f161222a4ac166c1b42b6d79961c005 ]
Currently, kprobe event checks whether the target symbol name is unique
or not, so that it does not put a probe on an unexpected place. But this
skips the check if the target is on a module because the module may not
be loaded.
To fix this issue, this patch checks the number of probe target symbols
in a target module when the module is loaded. If the probe is not on the
unique name symbols in the module, it will be rejected at that point.
Note that the symbol which has a unique name in the target module,
it will be accepted even if there are same-name symbols in the
kernel or other modules,
Link: https://lore.kernel.org/all/172016348553.99543.2834679315611882137.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 57b56d16800e8961278ecff0dc755d46c4575092 ]
The writing of css->cgroup associated with the cgroup root in
rebind_subsystems() is currently protected only by cgroup_mutex.
However, the reading of css->cgroup in both proc_cpuset_show() and
proc_cgroup_show() is protected just by css_set_lock. That makes the
readers susceptible to racing problems like data tearing or caching.
It is also a problem that can be reported by KCSAN.
This can be fixed by using READ_ONCE() and WRITE_ONCE() to access
css->cgroup. Alternatively, the writing of css->cgroup can be moved
under css_set_lock as well which is done by this patch.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bb6705c3f93bed2af03d43691743d4c43e3c8e6f ]
If the length of the name string is 1 and the value of name[0] is NULL
byte, an OOB vulnerability occurs in btf_name_valid_section() and the
return value is true, so the invalid name passes the check.
To solve this, you need to check if the first position is NULL byte and
if the first character is printable.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Fixes: bd70a8fb7ca4 ("bpf: Allow all printable characters in BTF DATASEC names")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://lore.kernel.org/r/20240831054702.364455-1-aha310510@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bfafe5efa9754ebc991750da0bcca2a6694f3ed3 ]
Previously, seccomp filters were released in release_task(), which
required the process to exit and its zombie to be collected. However,
exited threads/processes can't trigger any seccomp events, making it
more logical to release filters upon task exits.
This adjustment simplifies scenarios where a parent is tracing its child
process. The parent process can now handle all events from a seccomp
listening descriptor and then call wait to collect a child zombie.
seccomp_filter_release takes the siglock to avoid races with
seccomp_sync_threads. There was an idea to bypass taking the lock by
checking PF_EXITING, but it can be set without holding siglock if
threads have SIGNAL_GROUP_EXIT. This means it can happen concurently
with seccomp_filter_release.
This change also fixes another minor problem. Suppose that a group
leader installs the new filter without SECCOMP_FILTER_FLAG_TSYNC, exits,
and becomes a zombie. Without this change, SECCOMP_FILTER_FLAG_TSYNC
from any other thread can never succeed, seccomp_can_sync_threads() will
check a zombie leader and is_ancestor() will fail.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrei Vagin <avagin@google.com>
Link: https://lore.kernel.org/r/20240628021014.231976-3-avagin@google.com
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 01793ed86b5d7df1e956520b5474940743eb7ed8 ]
It's confusing to inspect 'prog->aux->tail_call_reachable' with drgn[0],
when bpf prog has tail call but 'tail_call_reachable' is false.
This patch corrects 'tail_call_reachable' when bpf prog has tail call.
Signed-off-by: Leon Hwang <hffilwlqm@gmail.com>
Link: https://lore.kernel.org/r/20240610124224.34673-2-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fe8cd2736e75c8ca3aed1ef181a834e41dc5310f ]
The CS_CPU_EXCLUSIVE flag is currently set whenever cpuset.cpus.exclusive
is set to make sure that the exclusivity test will be run to ensure its
exclusiveness. At the same time, this flag can be changed whenever the
partition root state is changed. For example, the CS_CPU_EXCLUSIVE flag
will be reset whenever a partition root becomes invalid. This makes
using CS_CPU_EXCLUSIVE to ensure exclusiveness a bit fragile.
The current scheme also makes setting up a cpuset.cpus.exclusive
hierarchy to enable remote partition harder as cpuset.cpus.exclusive
cannot overlap with any cpuset.cpus of sibling cpusets if their
cpuset.cpus.exclusive aren't set.
Solve these issues by deferring the setting of CS_CPU_EXCLUSIVE flag
until the cpuset become a valid partition root while adding new checks
in validate_change() to ensure that cpuset.cpus.exclusive of sibling
cpusets cannot overlap.
An additional check is also added to validate_change() to make sure that
cpuset.cpus of one cpuset cannot be a subset of cpuset.cpus.exclusive
of a sibling cpuset to avoid the problem that none of those CPUs will
be available when these exclusive CPUs are extracted out to a newly
enabled partition root. The Documentation/admin-guide/cgroup-v2.rst
file is updated to document the new constraints.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
stop_kthread()
commit 5bfbcd1ee57b607fd29e4645c7f350dd385dd9ad upstream.
The timerlat interface will get and put the task that is part of the
"kthread" field of the osn_var to keep it around until all references are
released. But here's a race in the "stop_kthread()" code that will call
put_task_struct() on the kthread if it is not a kernel thread. This can
race with the releasing of the references to that task struct and the
put_task_struct() can be called twice when it should have been called just
once.
Take the interface_lock() in stop_kthread() to synchronize this change.
But to do so, the function stop_per_cpu_kthreads() needs to change the
loop from for_each_online_cpu() to for_each_possible_cpu() and remove the
cpu_read_lock(), as the interface_lock can not be taken while the cpu
locks are held. The only side effect of this change is that it may do some
extra work, as the per_cpu variables of the offline CPUs would not be set
anyway, and would simply be skipped in the loop.
Remove unneeded "return;" in stop_kthread().
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20240905113359.2b934242@gandalf.local.home
Fixes: e88ed227f639e ("tracing/timerlat: Add user-space interface")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 49aa8a1f4d6800721c7971ed383078257f12e8f9 upstream.
In __tracing_open(), when max latency tracers took place on the cpu,
the time start of its buffer would be updated, then event entries with
timestamps being earlier than start of the buffer would be skipped
(see tracing_iter_reset()).
Softlockup will occur if the kernel is non-preemptible and too many
entries were skipped in the loop that reset every cpu buffer, so add
cond_resched() to avoid it.
Cc: stable@vger.kernel.org
Fixes: 2f26ebd549b9a ("tracing: use timestamp to determine start of latency traces")
Link: https://lore.kernel.org/20240827124654.3817443-1-zhengyejian@huaweicloud.com
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e6a53481da292d970d1edf0d8831121d1c5e2f0d upstream.
The timerlat tracer can use user space threads to check for osnoise and
timer latency. If the program using this is killed via a SIGTERM, the
threads are shutdown one at a time and another tracing instance can start
up resetting the threads before they are fully closed. That causes the
hrtimer assigned to the kthread to be shutdown and freed twice when the
dying thread finally closes the file descriptors, causing a use-after-free
bug.
Only cancel the hrtimer if the associated thread is still around. Also add
the interface_lock around the resetting of the tlat_var->kthread.
Note, this is just a quick fix that can be backported to stable. A real
fix is to have a better synchronization between the shutdown of old
threads and the starting of new ones.
Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20240905085330.45985730@gandalf.local.home
Fixes: e88ed227f639e ("tracing/timerlat: Add user-space interface")
Reported-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 177e1cc2f41235c145041eed03ef5bab18f32328 upstream.
The start_kthread() and stop_thread() code was not always called with the
interface_lock held. This means that the kthread variable could be
unexpectedly changed causing the kthread_stop() to be called on it when it
should not have been, leading to:
while true; do
rtla timerlat top -u -q & PID=$!;
sleep 5;
kill -INT $PID;
sleep 0.001;
kill -TERM $PID;
wait $PID;
done
Causing the following OOPS:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 5 UID: 0 PID: 885 Comm: timerlatu/5 Not tainted 6.11.0-rc4-test-00002-gbc754cc76d1b-dirty #125 a533010b71dab205ad2f507188ce8c82203b0254
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:hrtimer_active+0x58/0x300
Code: 48 c1 ee 03 41 54 48 01 d1 48 01 d6 55 53 48 83 ec 20 80 39 00 0f 85 30 02 00 00 49 8b 6f 30 4c 8d 75 10 4c 89 f0 48 c1 e8 03 <0f> b6 3c 10 4c 89 f0 83 e0 07 83 c0 03 40 38 f8 7c 09 40 84 ff 0f
RSP: 0018:ffff88811d97f940 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff88823c6b5b28 RCX: ffffed10478d6b6b
RDX: dffffc0000000000 RSI: ffffed10478d6b6c RDI: ffff88823c6b5b28
RBP: 0000000000000000 R08: ffff88823c6b5b58 R09: ffff88823c6b5b60
R10: ffff88811d97f957 R11: 0000000000000010 R12: 00000000000a801d
R13: ffff88810d8b35d8 R14: 0000000000000010 R15: ffff88823c6b5b28
FS: 0000000000000000(0000) GS:ffff88823c680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000561858ad7258 CR3: 000000007729e001 CR4: 0000000000170ef0
Call Trace:
<TASK>
? die_addr+0x40/0xa0
? exc_general_protection+0x154/0x230
? asm_exc_general_protection+0x26/0x30
? hrtimer_active+0x58/0x300
? __pfx_mutex_lock+0x10/0x10
? __pfx_locks_remove_file+0x10/0x10
hrtimer_cancel+0x15/0x40
timerlat_fd_release+0x8e/0x1f0
? security_file_release+0x43/0x80
__fput+0x372/0xb10
task_work_run+0x11e/0x1f0
? _raw_spin_lock+0x85/0xe0
? __pfx_task_work_run+0x10/0x10
? poison_slab_object+0x109/0x170
? do_exit+0x7a0/0x24b0
do_exit+0x7bd/0x24b0
? __pfx_migrate_enable+0x10/0x10
? __pfx_do_exit+0x10/0x10
? __pfx_read_tsc+0x10/0x10
? ktime_get+0x64/0x140
? _raw_spin_lock_irq+0x86/0xe0
do_group_exit+0xb0/0x220
get_signal+0x17ba/0x1b50
? vfs_read+0x179/0xa40
? timerlat_fd_read+0x30b/0x9d0
? __pfx_get_signal+0x10/0x10
? __pfx_timerlat_fd_read+0x10/0x10
arch_do_signal_or_restart+0x8c/0x570
? __pfx_arch_do_signal_or_restart+0x10/0x10
? vfs_read+0x179/0xa40
? ksys_read+0xfe/0x1d0
? __pfx_ksys_read+0x10/0x10
syscall_exit_to_user_mode+0xbc/0x130
do_syscall_64+0x74/0x110
? __pfx___rseq_handle_notify_resume+0x10/0x10
? __pfx_ksys_read+0x10/0x10
? fpregs_restore_userregs+0xdb/0x1e0
? fpregs_restore_userregs+0xdb/0x1e0
? syscall_exit_to_user_mode+0x116/0x130
? do_syscall_64+0x74/0x110
? do_syscall_64+0x74/0x110
? do_syscall_64+0x74/0x110
entry_SYSCALL_64_after_hwframe+0x71/0x79
RIP: 0033:0x7ff0070eca9c
Code: Unable to access opcode bytes at 0x7ff0070eca72.
RSP: 002b:00007ff006dff8c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: 0000000000000000 RBX: 0000000000000005 RCX: 00007ff0070eca9c
RDX: 0000000000000400 RSI: 00007ff006dff9a0 RDI: 0000000000000003
RBP: 00007ff006dffde0 R08: 0000000000000000 R09: 00007ff000000ba0
R10: 00007ff007004b08 R11: 0000000000000246 R12: 0000000000000003
R13: 00007ff006dff9a0 R14: 0000000000000007 R15: 0000000000000008
</TASK>
Modules linked in: snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hwdep snd_hda_core
---[ end trace 0000000000000000 ]---
This is because it would mistakenly call kthread_stop() on a user space
thread making it "exit" before it actually exits.
Since kthreads are created based on global behavior, use a cpumask to know
when kthreads are running and that they need to be shutdown before
proceeding to do new work.
Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/
This was debugged by using the persistent ring buffer:
Link: https://lore.kernel.org/all/20240823013902.135036960@goodmis.org/
Note, locking was originally used to fix this, but that proved to cause too
many deadlocks to work around:
https://lore.kernel.org/linux-trace-kernel/20240823102816.5e55753b@gandalf.local.home/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20240904103428.08efdf4c@gandalf.local.home
Fixes: e88ed227f639e ("tracing/timerlat: Add user-space interface")
Reported-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6dacd79d28842ff01f18b4900d897741aac5999e upstream.
Fix the condition to exclude the elfcorehdr segment from the SHA digest
calculation.
The j iterator is an index into the output sha_regions[] array, not into
the input image->segment[] array. Once it reaches
image->elfcorehdr_index, all subsequent segments are excluded. Besides,
if the purgatory segment precedes the elfcorehdr segment, the elfcorehdr
may be wrongly included in the calculation.
Link: https://lkml.kernel.org/r/20240805150750.170739-1-petr.tesarik@suse.com
Fixes: f7cc804a9fd4 ("kexec: exclude elfcorehdr from the segment digest")
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d33d26036a0274b472299d7dcdaa5fb34329f91b upstream.
rt_mutex_handle_deadlock() is called with rt_mutex::wait_lock held. In the
good case it returns with the lock held and in the deadlock case it emits a
warning and goes into an endless scheduling loop with the lock held, which
triggers the 'scheduling in atomic' warning.
Unlock rt_mutex::wait_lock in the dead lock case before issuing the warning
and dropping into the schedule for ever loop.
[ tglx: Moved unlock before the WARN(), removed the pointless comment,
massaged changelog, added Fixes tag ]
Fixes: 3d5c9340d194 ("rtmutex: Handle deadlock detection smarter")
Signed-off-by: Roland Xu <mu001999@outlook.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/ME0P300MB063599BEF0743B8FA339C2CECC802@ME0P300MB0635.AUSP300.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ea72ce5da22806d5713f3ffb39a6d5ae73841f93 upstream.
iounmap() on x86 occasionally fails to unmap because the provided valid
ioremap address is not below high_memory. It turned out that this
happens due to KASLR.
KASLR uses the full address space between PAGE_OFFSET and vaddr_end to
randomize the starting points of the direct map, vmalloc and vmemmap
regions. It thereby limits the size of the direct map by using the
installed memory size plus an extra configurable margin for hot-plug
memory. This limitation is done to gain more randomization space
because otherwise only the holes between the direct map, vmalloc,
vmemmap and vaddr_end would be usable for randomizing.
The limited direct map size is not exposed to the rest of the kernel, so
the memory hot-plug and resource management related code paths still
operate under the assumption that the available address space can be
determined with MAX_PHYSMEM_BITS.
request_free_mem_region() allocates from (1 << MAX_PHYSMEM_BITS) - 1
downwards. That means the first allocation happens past the end of the
direct map and if unlucky this address is in the vmalloc space, which
causes high_memory to become greater than VMALLOC_START and consequently
causes iounmap() to fail for valid ioremap addresses.
MAX_PHYSMEM_BITS cannot be changed for that because the randomization
does not align with address bit boundaries and there are other places
which actually require to know the maximum number of address bits. All
remaining usage sites of MAX_PHYSMEM_BITS have been analyzed and found
to be correct.
Cure this by exposing the end of the direct map via PHYSMEM_END and use
that for the memory hot-plug and resource management related places
instead of relying on MAX_PHYSMEM_BITS. In the KASLR case PHYSMEM_END
maps to a variable which is initialized by the KASLR initialization and
otherwise it is based on MAX_PHYSMEM_BITS as before.
To prevent future hickups add a check into add_pages() to catch callers
trying to add memory above PHYSMEM_END.
Fixes: 0483e1fa6e09 ("x86/mm: Implement ASLR for kernel memory regions")
Reported-by: Max Ramanouski <max8rr8@gmail.com>
Reported-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-By: Max Ramanouski <max8rr8@gmail.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/87ed6soy3z.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e4f78057291608f6968a6789c5ebb3bde7d95504 ]
The bypass lock contention mitigation assumes there can be at most
2 contenders on the bypass lock, following this scheme:
1) One kthread takes the bypass lock
2) Another one spins on it and increment the contended counter
3) A third one (a bypass enqueuer) sees the contended counter on and
busy loops waiting on it to decrement.
However this assumption is wrong. There can be only one CPU to find the
lock contended because call_rcu() (the bypass enqueuer) is the only
bypass lock acquire site that may not already hold the NOCB lock
beforehand, all the other sites must first contend on the NOCB lock.
Therefore step 2) is impossible.
The other problem is that the mitigation assumes that contenders all
belong to the same rdp CPU, which is also impossible for a raw spinlock.
In theory the warning could trigger if the enqueuer holds the bypass
lock and another CPU flushes the bypass queue concurrently but this is
prevented from all flush users:
1) NOCB kthreads only flush if they successfully _tried_ to lock the
bypass lock. So no contention management here.
2) Flush on callbacks migration happen remotely when the CPU is offline.
No concurrency against bypass enqueue.
3) Flush on deoffloading happen either locally with IRQs disabled or
remotely when the CPU is not yet online. No concurrency against
bypass enqueue.
4) Flush on barrier entrain happen either locally with IRQs disabled or
remotely when the CPU is offline. No concurrency against
bypass enqueue.
For those reasons, the bypass lock contention mitigation isn't needed
and is even wrong. Remove it but keep the warning reporting a contended
bypass lock on a remote CPU, to keep unexpected contention awareness.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bd44ca3de49cc1badcff7a96010fa2c64f04868c ]
Currently the dma debugging code can end up indirectly calling printk
under the radix_lock. This happens when a radix tree node allocation
fails.
This is a problem because the printk code, when used together with
netconsole, can end up inside the dma debugging code while trying to
transmit a message over netcons.
This creates the possibility of either a circular deadlock on the same
CPU, with that CPU trying to grab the radix_lock twice, or an ABBA
deadlock between different CPUs, where one CPU grabs the console lock
first and then waits for the radix_lock, while the other CPU is holding
the radix_lock and is waiting for the console lock.
The trace captured by lockdep is of the ABBA variant.
-> #2 (&dma_entry_hash[i].lock){-.-.}-{2:2}:
_raw_spin_lock_irqsave+0x5a/0x90
debug_dma_map_page+0x79/0x180
dma_map_page_attrs+0x1d2/0x2f0
bnxt_start_xmit+0x8c6/0x1540
netpoll_start_xmit+0x13f/0x180
netpoll_send_skb+0x20d/0x320
netpoll_send_udp+0x453/0x4a0
write_ext_msg+0x1b9/0x460
console_flush_all+0x2ff/0x5a0
console_unlock+0x55/0x180
vprintk_emit+0x2e3/0x3c0
devkmsg_emit+0x5a/0x80
devkmsg_write+0xfd/0x180
do_iter_readv_writev+0x164/0x1b0
vfs_writev+0xf9/0x2b0
do_writev+0x6d/0x110
do_syscall_64+0x80/0x150
entry_SYSCALL_64_after_hwframe+0x4b/0x53
-> #0 (console_owner){-.-.}-{0:0}:
__lock_acquire+0x15d1/0x31a0
lock_acquire+0xe8/0x290
console_flush_all+0x2ea/0x5a0
console_unlock+0x55/0x180
vprintk_emit+0x2e3/0x3c0
_printk+0x59/0x80
warn_alloc+0x122/0x1b0
__alloc_pages_slowpath+0x1101/0x1120
__alloc_pages+0x1eb/0x2c0
alloc_slab_page+0x5f/0x150
new_slab+0x2dc/0x4e0
___slab_alloc+0xdcb/0x1390
kmem_cache_alloc+0x23d/0x360
radix_tree_node_alloc+0x3c/0xf0
radix_tree_insert+0xf5/0x230
add_dma_entry+0xe9/0x360
dma_map_page_attrs+0x1d2/0x2f0
__bnxt_alloc_rx_frag+0x147/0x180
bnxt_alloc_rx_data+0x79/0x160
bnxt_rx_skb+0x29/0xc0
bnxt_rx_pkt+0xe22/0x1570
__bnxt_poll_work+0x101/0x390
bnxt_poll+0x7e/0x320
__napi_poll+0x29/0x160
net_rx_action+0x1e0/0x3e0
handle_softirqs+0x190/0x510
run_ksoftirqd+0x4e/0x90
smpboot_thread_fn+0x1a8/0x270
kthread+0x102/0x120
ret_from_fork+0x2f/0x40
ret_from_fork_asm+0x11/0x20
This bug is more likely than it seems, because when one CPU has run out
of memory, chances are the other has too.
The good news is, this bug is hidden behind the CONFIG_DMA_API_DEBUG, so
not many users are likely to trigger it.
Signed-off-by: Rik van Riel <riel@surriel.com>
Reported-by: Konstantin Ovsepian <ovs@meta.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 232590ea7fc125986a526e03081b98e5783f70d2 upstream.
This reverts commit 3b5bbe798b2451820e74243b738268f51901e7d0.
Eric reported that systemd-shutdown gets broken by blocking the creating
of pidfds for kthreads as older versions seems to rely on being able to
create a pidfd for any process in /proc.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/r/20240818035818.GA1929@sol.localdomain
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
cpus.exclusive not set
commit 311a1bdc44a8e06024df4fd3392be0dfc8298655 upstream.
Commit e2ffe502ba45 ("cgroup/cpuset: Add cpuset.cpus.exclusive for
v2") adds a user writable cpuset.cpus.exclusive file for setting
exclusive CPUs to be used for the creation of partitions. Since then
effective_xcpus depends on both the cpuset.cpus and cpuset.cpus.exclusive
setting. If cpuset.cpus.exclusive is set, effective_xcpus will depend
only on cpuset.cpus.exclusive. When it is not set, effective_xcpus
will be set according to the cpuset.cpus value when the cpuset becomes
a valid partition root.
When cpuset.cpus is being cleared by the user, effective_xcpus should
only be cleared when cpuset.cpus.exclusive is not set. However, that
is not currently the case.
# cd /sys/fs/cgroup/
# mkdir test
# echo +cpuset > cgroup.subtree_control
# cd test
# echo 3 > cpuset.cpus.exclusive
# cat cpuset.cpus.exclusive.effective
3
# echo > cpuset.cpus
# cat cpuset.cpus.exclusive.effective // was cleared
Fix it by clearing effective_xcpus only if cpuset.cpus.exclusive is
not set.
Fixes: e2ffe502ba45 ("cgroup/cpuset: Add cpuset.cpus.exclusive for v2")
Cc: stable@vger.kernel.org # v6.7+
Reported-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 959ab6350add903e352890af53e86663739fcb9a upstream.
We find a bug as below:
BUG: unable to handle page fault for address: 00000003
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 358 Comm: bash Tainted: G W I 6.6.0-10893-g60d6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/4
RIP: 0010:partition_sched_domains_locked+0x483/0x600
Code: 01 48 85 d2 74 0d 48 83 05 29 3f f8 03 01 f3 48 0f bc c2 89 c0 48 9
RSP: 0018:ffffc90000fdbc58 EFLAGS: 00000202
RAX: 0000000100000003 RBX: ffff888100b3dfa0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000002fe80
RBP: ffff888100b3dfb0 R08: 0000000000000001 R09: 0000000000000000
R10: ffffc90000fdbcb0 R11: 0000000000000004 R12: 0000000000000002
R13: ffff888100a92b48 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f44a5425740(0000) GS:ffff888237d80000(0000) knlGS:0000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000100030973 CR3: 000000010722c000 CR4: 00000000000006e0
Call Trace:
<TASK>
? show_regs+0x8c/0xa0
? __die_body+0x23/0xa0
? __die+0x3a/0x50
? page_fault_oops+0x1d2/0x5c0
? partition_sched_domains_locked+0x483/0x600
? search_module_extables+0x2a/0xb0
? search_exception_tables+0x67/0x90
? kernelmode_fixup_or_oops+0x144/0x1b0
? __bad_area_nosemaphore+0x211/0x360
? up_read+0x3b/0x50
? bad_area_nosemaphore+0x1a/0x30
? exc_page_fault+0x890/0xd90
? __lock_acquire.constprop.0+0x24f/0x8d0
? __lock_acquire.constprop.0+0x24f/0x8d0
? asm_exc_page_fault+0x26/0x30
? partition_sched_domains_locked+0x483/0x600
? partition_sched_domains_locked+0xf0/0x600
rebuild_sched_domains_locked+0x806/0xdc0
update_partition_sd_lb+0x118/0x130
cpuset_write_resmask+0xffc/0x1420
cgroup_file_write+0xb2/0x290
kernfs_fop_write_iter+0x194/0x290
new_sync_write+0xeb/0x160
vfs_write+0x16f/0x1d0
ksys_write+0x81/0x180
__x64_sys_write+0x21/0x30
x64_sys_call+0x2f25/0x4630
do_syscall_64+0x44/0xb0
entry_SYSCALL_64_after_hwframe+0x78/0xe2
RIP: 0033:0x7f44a553c887
It can be reproduced with cammands:
cd /sys/fs/cgroup/
mkdir test
cd test/
echo +cpuset > ../cgroup.subtree_control
echo root > cpuset.cpus.partition
cat /sys/fs/cgroup/cpuset.cpus.effective
0-3
echo 0-3 > cpuset.cpus // taking away all cpus from root
This issue is caused by the incorrect rebuilding of scheduling domains.
In this scenario, test/cpuset.cpus.partition should be an invalid root
and should not trigger the rebuilding of scheduling domains. When calling
update_parent_effective_cpumask with partcmd_update, if newmask is not
null, it should recheck newmask whether there are cpus is available
for parect/cs that has tasks.
Fixes: 0c7f293efc87 ("cgroup/cpuset: Add cpuset.cpus.exclusive.effective for v2")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8bc35475ef1a23b0e224f3242eb11c76cab0ea88 ]
When flushing a work item for cancellation, __flush_work() knows that it
exclusively owns the work item through its PENDING bit. 134874e2eee9
("workqueue: Allow cancel_work_sync() and disable_work() from atomic
contexts on BH work items") added a read of @work->data to determine whether
to use busy wait for BH work items that are being canceled. While the read
is safe when @from_cancel, @work->data was read before testing @from_cancel
to simplify code structure:
data = *work_data_bits(work);
if (from_cancel &&
!WARN_ON_ONCE(data & WORK_STRUCT_PWQ) && (data & WORK_OFFQ_BH)) {
While the read data was never used if !@from_cancel, this could trigger
KCSAN data race detection spuriously:
==================================================================
BUG: KCSAN: data-race in __flush_work / __flush_work
write to 0xffff8881223aa3e8 of 8 bytes by task 3998 on cpu 0:
instrument_write include/linux/instrumented.h:41 [inline]
___set_bit include/asm-generic/bitops/instrumented-non-atomic.h:28 [inline]
insert_wq_barrier kernel/workqueue.c:3790 [inline]
start_flush_work kernel/workqueue.c:4142 [inline]
__flush_work+0x30b/0x570 kernel/workqueue.c:4178
flush_work kernel/workqueue.c:4229 [inline]
...
read to 0xffff8881223aa3e8 of 8 bytes by task 50 on cpu 1:
__flush_work+0x42a/0x570 kernel/workqueue.c:4188
flush_work kernel/workqueue.c:4229 [inline]
flush_delayed_work+0x66/0x70 kernel/workqueue.c:4251
...
value changed: 0x0000000000400000 -> 0xffff88810006c00d
Reorganize the code so that @from_cancel is tested before @work->data is
accessed. The only problem is triggering KCSAN detection spuriously. This
shouldn't need READ_ONCE() or other access qualifiers.
No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: syzbot+b3e4f2f51ed645fd5df2@syzkaller.appspotmail.com
Fixes: 134874e2eee9 ("workqueue: Allow cancel_work_sync() and disable_work() from atomic contexts on BH work items")
Link: http://lkml.kernel.org/r/000000000000ae429e061eea2157@google.com
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 38f7e14519d39cf524ddc02d4caee9b337dad703 ]
UBSAN reports the following 'subtraction overflow' error when booting
in a virtual machine on Android:
| Internal error: UBSAN: integer subtraction overflow: 00000000f2005515 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-00006-g3cbe9e5abd46-dirty #4
| Hardware name: linux,dummy-virt (DT)
| pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : cancel_delayed_work+0x34/0x44
| lr : cancel_delayed_work+0x2c/0x44
| sp : ffff80008002ba60
| x29: ffff80008002ba60 x28: 0000000000000000 x27: 0000000000000000
| x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
| x23: 0000000000000000 x22: 0000000000000000 x21: ffff1f65014cd3c0
| x20: ffffc0e84c9d0da0 x19: ffffc0e84cab3558 x18: ffff800080009058
| x17: 00000000247ee1f8 x16: 00000000247ee1f8 x15: 00000000bdcb279d
| x14: 0000000000000001 x13: 0000000000000075 x12: 00000a0000000000
| x11: ffff1f6501499018 x10: 00984901651fffff x9 : ffff5e7cc35af000
| x8 : 0000000000000001 x7 : 3d4d455453595342 x6 : 000000004e514553
| x5 : ffff1f6501499265 x4 : ffff1f650ff60b10 x3 : 0000000000000620
| x2 : ffff80008002ba78 x1 : 0000000000000000 x0 : 0000000000000000
| Call trace:
| cancel_delayed_work+0x34/0x44
| deferred_probe_extend_timeout+0x20/0x70
| driver_register+0xa8/0x110
| __platform_driver_register+0x28/0x3c
| syscon_init+0x24/0x38
| do_one_initcall+0xe4/0x338
| do_initcall_level+0xac/0x178
| do_initcalls+0x5c/0xa0
| do_basic_setup+0x20/0x30
| kernel_init_freeable+0x8c/0xf8
| kernel_init+0x28/0x1b4
| ret_from_fork+0x10/0x20
| Code: f9000fbf 97fffa2f 39400268 37100048 (d42aa2a0)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: UBSAN: integer subtraction overflow: Fatal exception
This is due to shift_and_mask() using a signed immediate to construct
the mask and being called with a shift of 31 (WORK_OFFQ_POOL_SHIFT) so
that it ends up decrementing from INT_MIN.
Use an unsigned constant '1U' to generate the mask in shift_and_mask().
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Fixes: 1211f3b21c2a ("workqueue: Preserve OFFQ bits in cancel[_sync] paths")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bcc954c6caba01fca143162d5fbb90e46aa1ad80 ]
commit 779dbc2e78d7 ("printk: Avoid non-panic CPUs writing
to ringbuffer") disabled non-panic CPUs to further write messages to
ringbuffer after panicked.
Since the commit, non-panicked CPU's are not allowed to write to
ring buffer after panicked and CPU backtrace which is triggered
after panicked to sample non-panicked CPUs' backtrace no longer
serves its function as it has nothing to print.
Fix the issue by allowing non-panicked CPUs to write into ringbuffer
while CPU backtrace is in flight.
Fixes: 779dbc2e78d7 ("printk: Avoid non-panic CPUs writing to ringbuffer")
Signed-off-by: Ryo Takakura <takakura@valinux.co.jp>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240812072703.339690-1-takakura@valinux.co.jp
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c17ea1f3eaa330d445ac14a9428402ce4e3055e ]
If a core is offline then enabling SMT should not online CPUs of
this core. By enabling SMT, what is intended is either changing the SMT
value from "off" to "on" or setting the SMT level (threads per core) from a
lower to higher value.
On PowerPC the ppc64_cpu utility can be used, among other things, to
perform the following functions:
ppc64_cpu --cores-on # Get the number of online cores
ppc64_cpu --cores-on=X # Put exactly X cores online
ppc64_cpu --offline-cores=X[,Y,...] # Put specified cores offline
ppc64_cpu --smt={on|off|value} # Enable, disable or change SMT level
If the user has decided to offline certain cores, enabling SMT should
not online CPUs in those cores. This patch fixes the issue and changes
the behaviour as described, by introducing an arch specific function
topology_is_core_online(). It is currently implemented only for PowerPC.
Fixes: 73c58e7e1412 ("powerpc: Add HOTPLUG_SMT support")
Reported-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Closes: https://groups.google.com/g/powerpc-utils-devel/c/wrwVzAAnRlI/m/5KJSoqP4BAAJ
Signed-off-by: Nysal Jan K.A <nysal@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240731030126.956210-2-nysal@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fb6a421fb6153d97cf3058f9bd550b377b76a490 ]
With CONFIG_LTO_CLANG=y, the compiler may add .llvm.<hash> suffix to
function names to avoid duplication. APIs like kallsyms_lookup_name()
and kallsyms_on_each_match_symbol() tries to match these symbol names
without the .llvm.<hash> suffix, e.g., match "c_stop" with symbol
c_stop.llvm.17132674095431275852. This turned out to be problematic
for use cases that require exact match, for example, livepatch.
Fix this by making the APIs to match symbols exactly.
Also cleanup kallsyms_selftests accordingly.
Signed-off-by: Song Liu <song@kernel.org>
Fixes: 8cc32a9bbf29 ("kallsyms: strip LTO-only suffixes from promoted global functions")
Tested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240807220513.3100483-3-song@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 64e166099b69bfc09f667253358a15160b86ea43 ]
Commit cf8e8658100d ("arch: Remove Itanium (IA-64) architecture")
removed the last use of the absolute kallsyms.
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/20240221202655.2423854-1-jannh@google.com/
[masahiroy@kernel.org: rebase the code and reword the commit description]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Stable-dep-of: 020925ce9299 ("kallsyms: Do not cleanup .llvm.<hash> suffix before sorting symbols")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c442db3f49f27e5a60a641b2ac9a3c6320796ed6 ]
This reimplements commit 951bcae6c5a0 ("kallsyms: Avoid weak references
for kallsyms symbols") because I am not a big fan of PROVIDE().
As an alternative solution, this commit prepends one more kallsyms step.
KSYMS .tmp_vmlinux.kallsyms0.S # added
AS .tmp_vmlinux.kallsyms0.o # added
LD .tmp_vmlinux.btf
BTF .btf.vmlinux.bin.o
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.o
LD vmlinux
Step 0 takes /dev/null as input, and generates .tmp_vmlinux.kallsyms0.o,
which has a valid kallsyms format with the empty symbol list, and can be
linked to vmlinux. Since it is really small, the added compile-time cost
is negligible.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Stable-dep-of: 020925ce9299 ("kallsyms: Do not cleanup .llvm.<hash> suffix before sorting symbols")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bed2eb964c70b780fb55925892a74f26cb590b25 ]
Daniel Hodges reported a kernel verifier crash when playing with sched-ext.
Further investigation shows that the crash is due to invalid memory access
in stacksafe(). More specifically, it is the following code:
if (exact != NOT_EXACT &&
old->stack[spi].slot_type[i % BPF_REG_SIZE] !=
cur->stack[spi].slot_type[i % BPF_REG_SIZE])
return false;
The 'i' iterates old->allocated_stack.
If cur->allocated_stack < old->allocated_stack the out-of-bound
access will happen.
To fix the issue add 'i >= cur->allocated_stack' check such that if
the condition is true, stacksafe() should fail. Otherwise,
cur->stack[spi].slot_type[i % BPF_REG_SIZE] memory access is legal.
Fixes: 2793a8b015f7 ("bpf: exact states comparison for iterator convergence checks")
Cc: Eduard Zingerman <eddyz87@gmail.com>
Reported-by: Daniel Hodges <hodgesd@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240812214847.213612-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 3b5bbe798b2451820e74243b738268f51901e7d0 upstream.
It's currently possible to create pidfds for kthreads but it is unclear
what that is supposed to mean. Until we have use-cases for it and we
figured out what behavior we want block the creation of pidfds for
kthreads.
Link: https://lore.kernel.org/r/20240731-gleis-mehreinnahmen-6bbadd128383@brauner
Fixes: 32fcb426ec00 ("pid: add pidfd_open()")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 100bff23818eb61751ed05d64a7df36ce9728a4d upstream.
The regressing commit is new in 6.10. It assumed that anytime event->prog
is set bpf_overflow_handler() should be invoked to execute the attached bpf
program. This assumption is false for tracing events, and as a result the
regressing commit broke bpftrace by invoking the bpf handler with garbage
inputs on overflow.
Prior to the regression the overflow handlers formed a chain (of length 0,
1, or 2) and perf_event_set_bpf_handler() (the !tracing case) added
bpf_overflow_handler() to that chain, while perf_event_attach_bpf_prog()
(the tracing case) did not. Both set event->prog. The chain of overflow
handlers was replaced by a single overflow handler slot and a fixed call to
bpf_overflow_handler() when appropriate. This modifies the condition there
to check event->prog->type == BPF_PROG_TYPE_PERF_EVENT, restoring the
previous behavior and fixing bpftrace.
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Reported-by: Joe Damato <jdamato@fastly.com>
Closes: https://lore.kernel.org/lkml/ZpFfocvyF3KHaSzF@LQ3V64L9R2/
Fixes: f11f10bfa1ca ("perf/bpf: Call BPF handler directly, not through overflow machinery")
Cc: stable@vger.kernel.org
Tested-by: Joe Damato <jdamato@fastly.com> # bpftrace
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240813151727.28797-1-jdamato@fastly.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d0949cd44a62c4c41b30ea7ae94d8c887f586882 upstream.
When running the following:
# cd /sys/kernel/tracing/
# echo 1 > events/sched/sched_waking/enable
# echo 1 > events/sched/sched_switch/enable
# echo 0 > tracing_on
# dd if=per_cpu/cpu0/trace_pipe_raw of=/tmp/raw0.dat
The dd task would get stuck in an infinite loop in the kernel. What would
happen is the following:
When ring_buffer_read_page() returns -1 (no data) then a check is made to
see if the buffer is empty (as happens when the page is not full), it will
call wait_on_pipe() to wait until the ring buffer has data. When it is it
will try again to read data (unless O_NONBLOCK is set).
The issue happens when there's a reader and the file descriptor is closed.
The wait_on_pipe() will return when that is the case. But this loop will
continue to try again and wait_on_pipe() will again return immediately and
the loop will continue and never stop.
Simply check if the file was closed before looping and exit out if it is.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240808235730.78bf63e5@rorschach.local.home
Fixes: 2aa043a55b9a7 ("tracing/ring-buffer: Fix wait_on_pipe() race")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fe7a11c78d2a9bdb8b50afc278a31ac177000948 upstream.
If cpuset_cpu_inactive() fails, set_rq_online() need be called to rollback.
Fixes: 120455c514f7 ("sched: Fix hotplug vs CPU bandwidth control")
Cc: stable@kernel.org
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240703031610.587047-5-yangyingliang@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2f027354122f58ee846468a6f6b48672fff92e9b upstream.
Introduce sched_set_rq_on/offline() helper, so it can be called
in normal or error path simply. No functional changed.
Cc: stable@kernel.org
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240703031610.587047-4-yangyingliang@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e22f910a26cc2a3ac9c66b8e935ef2a7dd881117 upstream.
I got the following warn report while doing stress test:
jump label: negative count!
WARNING: CPU: 3 PID: 38 at kernel/jump_label.c:263 static_key_slow_try_dec+0x9d/0xb0
Call Trace:
<TASK>
__static_key_slow_dec_cpuslocked+0x16/0x70
sched_cpu_deactivate+0x26e/0x2a0
cpuhp_invoke_callback+0x3ad/0x10d0
cpuhp_thread_fun+0x3f5/0x680
smpboot_thread_fn+0x56d/0x8d0
kthread+0x309/0x400
ret_from_fork+0x41/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
Because when cpuset_cpu_inactive() fails in sched_cpu_deactivate(),
the cpu offline failed, but sched_smt_present is decremented before
calling sched_cpu_deactivate(), it leads to unbalanced dec/inc, so
fix it by incrementing sched_smt_present in the error path.
Fixes: c5511d03ec09 ("sched/smt: Make sched_smt_present track topology")
Cc: stable@kernel.org
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20240703031610.587047-3-yangyingliang@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 31b164e2e4af84d08d2498083676e7eeaa102493 upstream.
Introduce sched_smt_present_inc/dec() helper, so it can be called
in normal or error path simply. No functional changed.
Cc: stable@kernel.org
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240703031610.587047-2-yangyingliang@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6d45e1c948a8b7ed6ceddb14319af69424db730c upstream.
We are hit with a not easily reproducible divide-by-0 panic in padata.c at
bootup time.
[ 10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI
[ 10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1
[ 10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021
[ 10.017908] Workqueue: events_unbound padata_mt_helper
[ 10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0
:
[ 10.017963] Call Trace:
[ 10.017968] <TASK>
[ 10.018004] ? padata_mt_helper+0x39/0xb0
[ 10.018084] process_one_work+0x174/0x330
[ 10.018093] worker_thread+0x266/0x3a0
[ 10.018111] kthread+0xcf/0x100
[ 10.018124] ret_from_fork+0x31/0x50
[ 10.018138] ret_from_fork_asm+0x1a/0x30
[ 10.018147] </TASK>
Looking at the padata_mt_helper() function, the only way a divide-by-0
panic can happen is when ps->chunk_size is 0. The way that chunk_size is
initialized in padata_do_multithreaded(), chunk_size can be 0 when the
min_chunk in the passed-in padata_mt_job structure is 0.
Fix this divide-by-0 panic by making sure that chunk_size will be at least
1 no matter what the input parameters are.
Link: https://lkml.kernel.org/r/20240806174647.1050398-1-longman@redhat.com
Fixes: 004ed42638f4 ("padata: add basic support for multithreaded jobs")
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Waiman Long <longman@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bcf86c01ca4676316557dd482c8416ece8c2e143 upstream.
"tracing_map->next_elt" in get_free_elt() is at risk of overflowing.
Once it overflows, new elements can still be inserted into the tracing_map
even though the maximum number of elements (`max_elts`) has been reached.
Continuing to insert elements after the overflow could result in the
tracing_map containing "tracing_map->max_size" elements, leaving no empty
entries.
If any attempt is made to insert an element into a full tracing_map using
`__tracing_map_insert()`, it will cause an infinite loop with preemption
disabled, leading to a CPU hang problem.
Fix this by preventing any further increments to "tracing_map->next_elt"
once it reaches "tracing_map->max_elt".
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 08d43a5fa063e ("tracing: Add lock-free tracing_map")
Co-developed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Link: https://lore.kernel.org/20240805055922.6277-1-Tze-nan.Wu@mediatek.com
Signed-off-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b1560408692cd0ab0370cfbe9deb03ce97ab3f6d upstream.
When eventfs was introduced, special care had to be done to coordinate the
freeing of the file meta data with the files that are exposed to user
space. The file meta data would have a ref count that is set when the file
is created and would be decremented and freed after the last user that
opened the file closed it. When the file meta data was to be freed, it
would set a flag (EVENT_FILE_FL_FREED) to denote that the file is freed,
and any new references made (like new opens or reads) would fail as it is
marked freed. This allowed other meta data to be freed after this flag was
set (under the event_mutex).
All the files that were dynamically created in the events directory had a
pointer to the file meta data and would call event_release() when the last
reference to the user space file was closed. This would be the time that it
is safe to free the file meta data.
A shortcut was made for the "format" file. It's i_private would point to
the "call" entry directly and not point to the file's meta data. This is
because all format files are the same for the same "call", so it was
thought there was no reason to differentiate them. The other files
maintain state (like the "enable", "trigger", etc). But this meant if the
file were to disappear, the "format" file would be unaware of it.
This caused a race that could be trigger via the user_events test (that
would create dynamic events and free them), and running a loop that would
read the user_events format files:
In one console run:
# cd tools/testing/selftests/user_events
# while true; do ./ftrace_test; done
And in another console run:
# cd /sys/kernel/tracing/
# while true; do cat events/user_events/__test_event/format; done 2>/dev/null
With KASAN memory checking, it would trigger a use-after-free bug report
(which was a real bug). This was because the format file was not checking
the file's meta data flag "EVENT_FILE_FL_FREED", so it would access the
event that the file meta data pointed to after the event was freed.
After inspection, there are other locations that were found to not check
the EVENT_FILE_FL_FREED flag when accessing the trace_event_file. Add a
new helper function: event_file_file() that will make sure that the
event_mutex is held, and will return NULL if the trace_event_file has the
EVENT_FILE_FL_FREED flag set. Have the first reference of the struct file
pointer use event_file_file() and check for NULL. Later uses can still use
the event_file_data() helper function if the event_mutex is still held and
was not released since the event_file_file() call.
Link: https://lore.kernel.org/all/20240719204701.1605950-1-minipli@grsecurity.net/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Cc: Ilkka Naulapää <digirigawa@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Alexey Makhalov <alexey.makhalov@broadcom.com>
Cc: Vasavi Sirnapalli <vasavi.sirnapalli@broadcom.com>
Link: https://lore.kernel.org/20240730110657.3b69d3c1@gandalf.local.home
Fixes: b63db58e2fa5d ("eventfs/tracing: Add callback for release of an eventfs_inode")
Reported-by: Mathias Krause <minipli@grsecurity.net>
Tested-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit edbbaae42a56f9a2b39c52ef2504dfb3fb0a7858 upstream.
Currently, whenever a caller is providing an affinity hint for an
interrupt, the allocation code uses it to calculate the node and copies the
cpumask into irq_desc::affinity.
If the affinity for the interrupt is not marked 'managed' then the startup
of the interrupt ignores irq_desc::affinity and uses the system default
affinity mask.
Prevent this by setting the IRQD_AFFINITY_SET flag for the interrupt in the
allocator, which causes irq_setup_affinity() to use irq_desc::affinity on
interrupt startup if the mask contains an online CPU.
[ tglx: Massaged changelog ]
Fixes: 45ddcecbfa94 ("genirq: Use affinity hint in irqdesc allocation")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20240806072044.837827-1-shayd@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7d4df2dad312f270d62fecb0e5c8b086c6d7dcfc upstream.
When collecting coverage from softirqs, KCOV uses in_serving_softirq() to
check whether the code is running in the softirq context. Unfortunately,
in_serving_softirq() is > 0 even when the code is running in the hardirq
or NMI context for hardirqs and NMIs that happened during a softirq.
As a result, if a softirq handler contains a remote coverage collection
section and a hardirq with another remote coverage collection section
happens during handling the softirq, KCOV incorrectly detects a nested
softirq coverate collection section and prints a WARNING, as reported by
syzbot.
This issue was exposed by commit a7f3813e589f ("usb: gadget: dummy_hcd:
Switch to hrtimer transfer scheduler"), which switched dummy_hcd to using
hrtimer and made the timer's callback be executed in the hardirq context.
Change the related checks in KCOV to account for this behavior of
in_serving_softirq() and make KCOV ignore remote coverage collection
sections in the hardirq and NMI contexts.
This prevents the WARNING printed by syzbot but does not fix the inability
of KCOV to collect coverage from the __usb_hcd_giveback_urb when dummy_hcd
is in use (caused by a7f3813e589f); a separate patch is required for that.
Link: https://lkml.kernel.org/r/20240729022158.92059-1-andrey.konovalov@linux.dev
Fixes: 5ff3b30ab57d ("kcov: collect coverage from interrupts")
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Reported-by: syzbot+2388cdaeb6b10f0c13ac@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2388cdaeb6b10f0c13ac
Acked-by: Marco Elver <elver@google.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Aleksandr Nogikh <nogikh@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marcello Sylvester Bauer <sylv@sylv.io>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5916be8a53de6401871bdd953f6c60237b47d6d3 upstream.
The addition of the bases argument to clock_was_set() fixed up all call
sites correctly except for do_adjtimex(). This uses CLOCK_REALTIME
instead of CLOCK_SET_WALL as argument. CLOCK_REALTIME is 0.
As a result the effect of that clock_was_set() notification is incomplete
and might result in timers expiring late because the hrtimer code does
not re-evaluate the affected clock bases.
Use CLOCK_SET_WALL instead of CLOCK_REALTIME to tell the hrtimers code
which clock bases need to be re-evaluated.
Fixes: 17a1b8826b45 ("hrtimer: Add bases argument to clock_was_set()")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/877ccx7igo.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 06c03c8edce333b9ad9c6b207d93d3a5ae7c10c0 upstream.
Using syzkaller with the recently reintroduced signed integer overflow
sanitizer produces this UBSAN report:
UBSAN: signed-integer-overflow in ../kernel/time/ntp.c:738:18
9223372036854775806 + 4 cannot be represented in type 'long'
Call Trace:
handle_overflow+0x171/0x1b0
__do_adjtimex+0x1236/0x1440
do_adjtimex+0x2be/0x740
The user supplied time_constant value is incremented by four and then
clamped to the operating range.
Before commit eea83d896e31 ("ntp: NTP4 user space bits update") the user
supplied value was sanity checked to be in the operating range. That change
removed the sanity check and relied on clamping after incrementing which
does not work correctly when the user supplied value is in the overflow
zone of the '+ 4' operation.
The operation requires CAP_SYS_TIME and the side effect of the overflow is
NTP getting out of sync.
Similar to the fixups for time_maxerror and time_esterror, clamp the user
space supplied value to the operating range.
[ tglx: Switch to clamping ]
Fixes: eea83d896e31 ("ntp: NTP4 user space bits update")
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240517-b4-sio-ntp-c-v2-1-f3a80096f36f@google.com
Closes: https://github.com/KSPP/linux/issues/352
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 87d571d6fb77ec342a985afa8744bb9bb75b3622 ]
Using syzkaller alongside the newly reintroduced signed integer overflow
sanitizer spits out this report:
UBSAN: signed-integer-overflow in ../kernel/time/ntp.c:461:16
9223372036854775807 + 500 cannot be represented in type 'long'
Call Trace:
handle_overflow+0x171/0x1b0
second_overflow+0x2d6/0x500
accumulate_nsecs_to_secs+0x60/0x160
timekeeping_advance+0x1fe/0x890
update_wall_time+0x10/0x30
time_maxerror is unconditionally incremented and the result is checked
against NTP_PHASE_LIMIT, but the increment itself can overflow, resulting
in wrap-around to negative space.
Before commit eea83d896e31 ("ntp: NTP4 user space bits update") the user
supplied value was sanity checked to be in the operating range. That change
removed the sanity check and relied on clamping in handle_overflow() which
does not work correctly when the user supplied value is in the overflow
zone of the '+ 500' operation.
The operation requires CAP_SYS_TIME and the side effect of the overflow is
NTP getting out of sync.
Miroslav confirmed that the input value should be clamped to the operating
range and the same applies to time_esterror. The latter is not used by the
kernel, but the value still should be in the operating range as it was
before the sanity check got removed.
Clamp them to the operating range.
[ tglx: Changed it to clamping and included time_esterror ]
Fixes: eea83d896e31 ("ntp: NTP4 user space bits update")
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Link: https://lore.kernel.org/all/20240517-b4-sio-ntp-usec-v2-1-d539180f2b79@google.com
Closes: https://github.com/KSPP/linux/issues/354
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
