| Age | Commit message (Collapse) | Author |
|---|
|
commit 0ef8047b737d7480a5d4c46d956e97c190f13050 upstream.
Add static_call_update_early() for updating static-call targets in
very early boot.
This will be needed for support of Xen guest type specific hypercall
functions.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 838a10bd2ebfe11a60dd67687533a7cfc220cc86 upstream.
Arguments to a raw tracepoint are tagged as trusted, which carries the
semantics that the pointer will be non-NULL. However, in certain cases,
a raw tracepoint argument may end up being NULL. More context about this
issue is available in [0].
Thus, there is a discrepancy between the reality, that raw_tp arguments can
actually be NULL, and the verifier's knowledge, that they are never NULL,
causing explicit NULL check branch to be dead code eliminated.
A previous attempt [1], i.e. the second fixed commit, was made to
simulate symbolic execution as if in most accesses, the argument is a
non-NULL raw_tp, except for conditional jumps. This tried to suppress
branch prediction while preserving compatibility, but surfaced issues
with production programs that were difficult to solve without increasing
verifier complexity. A more complete discussion of issues and fixes is
available at [2].
Fix this by maintaining an explicit list of tracepoints where the
arguments are known to be NULL, and mark the positional arguments as
PTR_MAYBE_NULL. Additionally, capture the tracepoints where arguments
are known to be ERR_PTR, and mark these arguments as scalar values to
prevent potential dereference.
Each hex digit is used to encode NULL-ness (0x1) or ERR_PTR-ness (0x2),
shifted by the zero-indexed argument number x 4. This can be represented
as follows:
1st arg: 0x1
2nd arg: 0x10
3rd arg: 0x100
... and so on (likewise for ERR_PTR case).
In the future, an automated pass will be used to produce such a list, or
insert __nullable annotations automatically for tracepoints. Each
compilation unit will be analyzed and results will be collated to find
whether a tracepoint pointer is definitely not null, maybe null, or an
unknown state where verifier conservatively marks it PTR_MAYBE_NULL.
A proof of concept of this tool from Eduard is available at [3].
Note that in case we don't find a specification in the raw_tp_null_args
array and the tracepoint belongs to a kernel module, we will
conservatively mark the arguments as PTR_MAYBE_NULL. This is because
unlike for in-tree modules, out-of-tree module tracepoints may pass NULL
freely to the tracepoint. We don't protect against such tracepoints
passing ERR_PTR (which is uncommon anyway), lest we mark all such
arguments as SCALAR_VALUE.
While we are it, let's adjust the test raw_tp_null to not perform
dereference of the skb->mark, as that won't be allowed anymore, and make
it more robust by using inline assembly to test the dead code
elimination behavior, which should still stay the same.
[0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb
[1]: https://lore.kernel.org/all/20241104171959.2938862-1-memxor@gmail.com
[2]: https://lore.kernel.org/bpf/20241206161053.809580-1-memxor@gmail.com
[3]: https://github.com/eddyz87/llvm-project/tree/nullness-for-tracepoint-params
Reported-by: Juri Lelli <juri.lelli@redhat.com> # original bug
Reported-by: Manu Bretelle <chantra@meta.com> # bugs in masking fix
Fixes: 3f00c5239344 ("bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs")
Fixes: cb4158ce8ec8 ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL")
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241213221929.3495062-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 978c4486cca5c7b9253d3ab98a88c8e769cb9bbd upstream.
Syzbot reported [1] crash that happens for following tracing scenario:
- create tracepoint perf event with attr.inherit=1, attach it to the
process and set bpf program to it
- attached process forks -> chid creates inherited event
the new child event shares the parent's bpf program and tp_event
(hence prog_array) which is global for tracepoint
- exit both process and its child -> release both events
- first perf_event_detach_bpf_prog call will release tp_event->prog_array
and second perf_event_detach_bpf_prog will crash, because
tp_event->prog_array is NULL
The fix makes sure the perf_event_detach_bpf_prog checks prog_array
is valid before it tries to remove the bpf program from it.
[1] https://lore.kernel.org/bpf/Z1MR6dCIKajNS6nU@krava/T/#m91dbf0688221ec7a7fc95e896a7ef9ff93b0b8ad
Fixes: 0ee288e69d03 ("bpf,perf: Fix perf_event_detach_bpf_prog error handling")
Reported-by: syzbot+2e0d2840414ce817aaac@syzkaller.appspotmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241208142507.1207698-1-jolsa@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7d0d673627e20cfa3b21a829a896ce03b58a4f1c upstream.
Currently, the pointer stored in call->prog_array is loaded in
__uprobe_perf_func(), with no RCU annotation and no immediately visible
RCU protection, so it looks as if the loaded pointer can immediately be
dangling.
Later, bpf_prog_run_array_uprobe() starts a RCU-trace read-side critical
section, but this is too late. It then uses rcu_dereference_check(), but
this use of rcu_dereference_check() does not actually dereference anything.
Fix it by aligning the semantics to bpf_prog_run_array(): Let the caller
provide rcu_read_lock_trace() protection and then load call->prog_array
with rcu_dereference_check().
This issue seems to be theoretical: I don't know of any way to reach this
code without having handle_swbp() further up the stack, which is already
holding a rcu_read_lock_trace() lock, so where we take
rcu_read_lock_trace() in __uprobe_perf_func()/bpf_prog_run_array_uprobe()
doesn't actually have any effect.
Fixes: 8c7dcb84e3b7 ("bpf: implement sleepable uprobes by chaining gps")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241210-bpf-fix-uprobe-uaf-v4-1-5fc8959b2b74@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 659b9ba7cb2d7adb64618b87ddfaa528a143766e upstream.
Robert Morris reported the following program type which passes the
verifier in [0]:
SEC("struct_ops/bpf_cubic_init")
void BPF_PROG(bpf_cubic_init, struct sock *sk)
{
asm volatile("r2 = *(u16*)(r1 + 0)"); // verifier should demand u64
asm volatile("*(u32 *)(r2 +1504) = 0"); // 1280 in some configs
}
The second line may or may not work, but the first instruction shouldn't
pass, as it's a narrow load into the context structure of the struct ops
callback. The code falls back to btf_ctx_access to ensure correctness
and obtaining the types of pointers. Ensure that the size of the access
is correctly checked to be 8 bytes, otherwise the verifier thinks the
narrow load obtained a trusted BTF pointer and will permit loads/stores
as it sees fit.
Perform the check on size after we've verified that the load is for a
pointer field, as for scalar values narrow loads are fine. Access to
structs passed as arguments to a BPF program are also treated as
scalars, therefore no adjustment is needed in their case.
Existing verifier selftests are broken by this change, but because they
were incorrect. Verifier tests for d_path were performing narrow load
into context to obtain path pointer, had this program actually run it
would cause a crash. The same holds for verifier_btf_ctx_access tests.
[0]: https://lore.kernel.org/bpf/51338.1732985814@localhost
Fixes: 9e15db66136a ("bpf: Implement accurate raw_tp context access via BTF")
Reported-by: Robert Morris <rtm@mit.edu>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241212092050.3204165-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c00d738e1673ab801e1577e4e3c780ccf88b1a5b upstream.
This patch reverts commit
cb4158ce8ec8 ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL"). The
patch was well-intended and meant to be as a stop-gap fixing branch
prediction when the pointer may actually be NULL at runtime. Eventually,
it was supposed to be replaced by an automated script or compiler pass
detecting possibly NULL arguments and marking them accordingly.
However, it caused two main issues observed for production programs and
failed to preserve backwards compatibility. First, programs relied on
the verifier not exploring == NULL branch when pointer is not NULL, thus
they started failing with a 'dereference of scalar' error. Next,
allowing raw_tp arguments to be modified surfaced the warning in the
verifier that warns against reg->off when PTR_MAYBE_NULL is set.
More information, context, and discusson on both problems is available
in [0]. Overall, this approach had several shortcomings, and the fixes
would further complicate the verifier's logic, and the entire masking
scheme would have to be removed eventually anyway.
Hence, revert the patch in preparation of a better fix avoiding these
issues to replace this commit.
[0]: https://lore.kernel.org/bpf/20241206161053.809580-1-memxor@gmail.com
Reported-by: Manu Bretelle <chantra@meta.com>
Fixes: cb4158ce8ec8 ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241213221929.3495062-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 22368fe1f9bbf39db2b5b52859589883273e80ce upstream.
The condition in replenish_dl_new_period() that checks if a reservation
(dl_server) is deferred and is not handling a starvation case is
obviously wrong.
Fix it.
Fixes: a110a81c52a9 ("sched/deadline: Deferrable dl server")
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20241127063740.8278-1-juri.lelli@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ef1b808e3b7c98612feceedf985c2fbbeb28f956 upstream.
Uprobes always use bpf_prog_run_array_uprobe() under tasks-trace-RCU
protection. But it is possible to attach a non-sleepable BPF program to a
uprobe, and non-sleepable BPF programs are freed via normal RCU (see
__bpf_prog_put_noref()). This leads to UAF of the bpf_prog because a normal
RCU grace period does not imply a tasks-trace-RCU grace period.
Fix it by explicitly waiting for a tasks-trace-RCU grace period after
removing the attachment of a bpf_prog to a perf_event.
Fixes: 8c7dcb84e3b7 ("bpf: implement sleepable uprobes by chaining gps")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20241210-bpf-fix-actual-uprobe-uaf-v1-1-19439849dd44@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6675ce20046d149e1e1ffe7e9577947dee17aad5 upstream.
do_softirq_post_smp_call_flush() on PREEMPT_RT kernels carries a
WARN_ON_ONCE() for any SOFTIRQ being raised from an SMP-call-function.
Since do_softirq_post_smp_call_flush() is called with preempt disabled,
raising a SOFTIRQ during flush_smp_call_function_queue() can lead to
longer preempt disabled sections.
Since commit b2a02fc43a1f ("smp: Optimize
send_call_function_single_ipi()") IPIs to an idle CPU in
TIF_POLLING_NRFLAG mode can be optimized out by instead setting
TIF_NEED_RESCHED bit in idle task's thread_info and relying on the
flush_smp_call_function_queue() in the idle-exit path to run the
SMP-call-function.
To trigger an idle load balancing, the scheduler queues
nohz_csd_function() responsible for triggering an idle load balancing on
a target nohz idle CPU and sends an IPI. Only now, this IPI is optimized
out and the SMP-call-function is executed from
flush_smp_call_function_queue() in do_idle() which can raise a
SCHED_SOFTIRQ to trigger the balancing.
So far, this went undetected since, the need_resched() check in
nohz_csd_function() would make it bail out of idle load balancing early
as the idle thread does not clear TIF_POLLING_NRFLAG before calling
flush_smp_call_function_queue(). The need_resched() check was added with
the intent to catch a new task wakeup, however, it has recently
discovered to be unnecessary and will be removed in the subsequent
commit after which nohz_csd_function() can raise a SCHED_SOFTIRQ from
flush_smp_call_function_queue() to trigger an idle load balance on an
idle target in TIF_POLLING_NRFLAG mode.
nohz_csd_function() bails out early if "idle_cpu()" check for the
target CPU, and does not lock the target CPU's rq until the very end,
once it has found tasks to run on the CPU and will not inhibit the
wakeup of, or running of a newly woken up higher priority task. Account
for this and prevent a WARN_ON_ONCE() when SCHED_SOFTIRQ is raised from
flush_smp_call_function_queue().
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119054432.6405-2-kprateek.nayak@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 76031d9536a076bf023bedbdb1b4317fc801dd67 upstream.
Guenter reported boot stalls on a emulated ARM 32-bit platform, which has a
24-bit wide clocksource.
It turns out that the calculated maximal idle time, which limits idle
sleeps to prevent clocksource wrap arounds, is close to the point where the
negative motion detection triggers.
max_idle_ns: 597268854 ns
negative motion tripping point: 671088640 ns
If the idle wakeup is delayed beyond that point, the clocksource
advances far enough to trigger the negative motion detection. This
prevents the clock to advance and in the worst case the system stalls
completely if the consecutive sleeps based on the stale clock are
delayed as well.
Cure this by calculating a more robust cut-off value for negative motion,
which covers 87.5% of the actual clocksource counter width. Compare the
delta against this value to catch negative motion. This is specifically for
clock sources with a small counter width as their wrap around time is close
to the half counter width. For clock sources with wide counters this is not
a problem because the maximum idle time is far from the half counter width
due to the math overflow protection constraints.
For the case at hand this results in a tripping point of 1174405120ns.
Note, that this cannot prevent issues when the delay exceeds the 87.5%
margin, but that's not different from the previous unchecked version which
allowed arbitrary time jumps.
Systems with small counter width are prone to invalid results, but this
problem is unlikely to be seen on real hardware. If such a system
completely stalls for more than half a second, then there are other more
urgent problems than the counter wrapping around.
Fixes: c163e40af9b2 ("timekeeping: Always check for negative motion")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/8734j5ul4x.ffs@tglx
Closes: https://lore.kernel.org/all/387b120b-d68a-45e8-b6ab-768cd95d11c2@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d44d26987bb3df6d76556827097fc9ce17565cb8 upstream.
Since 135225a363ae timekeeping_cycles_to_ns() handles large offsets which
would lead to 64bit multiplication overflows correctly. It's also protected
against negative motion of the clocksource unconditionally, which was
exclusive to x86 before.
timekeeping_advance() handles large offsets already correctly.
That means the value of CONFIG_DEBUG_TIMEKEEPING which analyzed these cases
is very close to zero. Remove all of it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241031120328.536010148@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 494b332064c0ce2f7392fa92632bc50191c1b517 ]
Fix eprobe event to unregister event call and release eprobe when it fails
to add dynamic event correctly.
Link: https://lore.kernel.org/all/173289886698.73724.1959899350183686006.stgit@devnote2/
Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0664e2c311b9fa43b33e3e81429cd0c2d7f9c638 ]
When running the following command:
while true; do
stress-ng --cyclic 30 --timeout 30s --minimize --quiet
done
a warning is eventually triggered:
WARNING: CPU: 43 PID: 2848 at kernel/sched/deadline.c:794
setup_new_dl_entity+0x13e/0x180
...
Call Trace:
<TASK>
? show_trace_log_lvl+0x1c4/0x2df
? enqueue_dl_entity+0x631/0x6e0
? setup_new_dl_entity+0x13e/0x180
? __warn+0x7e/0xd0
? report_bug+0x11a/0x1a0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
enqueue_dl_entity+0x631/0x6e0
enqueue_task_dl+0x7d/0x120
__do_set_cpus_allowed+0xe3/0x280
__set_cpus_allowed_ptr_locked+0x140/0x1d0
__set_cpus_allowed_ptr+0x54/0xa0
migrate_enable+0x7e/0x150
rt_spin_unlock+0x1c/0x90
group_send_sig_info+0xf7/0x1a0
? kill_pid_info+0x1f/0x1d0
kill_pid_info+0x78/0x1d0
kill_proc_info+0x5b/0x110
__x64_sys_kill+0x93/0xc0
do_syscall_64+0x5c/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x7f0dab31f92b
This warning occurs because set_cpus_allowed dequeues and enqueues tasks
with the ENQUEUE_RESTORE flag set. If the task is boosted, the warning
is triggered. A boosted task already had its parameters set by
rt_mutex_setprio, and a new call to setup_new_dl_entity is unnecessary,
hence the WARN_ON call.
Check if we are requeueing a boosted task and avoid calling
setup_new_dl_entity if that's the case.
Fixes: 295d6d5e3736 ("sched/deadline: Fix switching to -deadline")
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20240724142253.27145-2-wander@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e932c4ab38f072ce5894b2851fea8bc5754bb8e5 ]
Scheduler raises a SCHED_SOFTIRQ to trigger a load balancing event on
from the IPI handler on the idle CPU. If the SMP function is invoked
from an idle CPU via flush_smp_call_function_queue() then the HARD-IRQ
flag is not set and raise_softirq_irqoff() needlessly wakes ksoftirqd
because soft interrupts are handled before ksoftirqd get on the CPU.
Adding a trace_printk() in nohz_csd_func() at the spot of raising
SCHED_SOFTIRQ and enabling trace events for sched_switch, sched_wakeup,
and softirq_entry (for SCHED_SOFTIRQ vector alone) helps observing the
current behavior:
<idle>-0 [000] dN.1.: nohz_csd_func: Raising SCHED_SOFTIRQ from nohz_csd_func
<idle>-0 [000] dN.4.: sched_wakeup: comm=ksoftirqd/0 pid=16 prio=120 target_cpu=000
<idle>-0 [000] .Ns1.: softirq_entry: vec=7 [action=SCHED]
<idle>-0 [000] .Ns1.: softirq_exit: vec=7 [action=SCHED]
<idle>-0 [000] d..2.: sched_switch: prev_comm=swapper/0 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=ksoftirqd/0 next_pid=16 next_prio=120
ksoftirqd/0-16 [000] d..2.: sched_switch: prev_comm=ksoftirqd/0 prev_pid=16 prev_prio=120 prev_state=S ==> next_comm=swapper/0 next_pid=0 next_prio=120
...
Use __raise_softirq_irqoff() to raise the softirq. The SMP function call
is always invoked on the requested CPU in an interrupt handler. It is
guaranteed that soft interrupts are handled at the end.
Following are the observations with the changes when enabling the same
set of events:
<idle>-0 [000] dN.1.: nohz_csd_func: Raising SCHED_SOFTIRQ for nohz_idle_balance
<idle>-0 [000] dN.1.: softirq_raise: vec=7 [action=SCHED]
<idle>-0 [000] .Ns1.: softirq_entry: vec=7 [action=SCHED]
No unnecessary ksoftirqd wakeups are seen from idle task's context to
service the softirq.
Fixes: b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()")
Closes: https://lore.kernel.org/lkml/fcf823f-195e-6c9a-eac3-25f870cb35ac@inria.fr/ [1]
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20241119054432.6405-5-kprateek.nayak@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
busy
[ Upstream commit ff47a0acfcce309cf9e175149c75614491953c8f ]
Commit b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()")
optimizes IPIs to idle CPUs in TIF_POLLING_NRFLAG mode by setting the
TIF_NEED_RESCHED flag in idle task's thread info and relying on
flush_smp_call_function_queue() in idle exit path to run the
call-function. A softirq raised by the call-function is handled shortly
after in do_softirq_post_smp_call_flush() but the TIF_NEED_RESCHED flag
remains set and is only cleared later when schedule_idle() calls
__schedule().
need_resched() check in _nohz_idle_balance() exists to bail out of load
balancing if another task has woken up on the CPU currently in-charge of
idle load balancing which is being processed in SCHED_SOFTIRQ context.
Since the optimization mentioned above overloads the interpretation of
TIF_NEED_RESCHED, check for idle_cpu() before going with the existing
need_resched() check which can catch a genuine task wakeup on an idle
CPU processing SCHED_SOFTIRQ from do_softirq_post_smp_call_flush(), as
well as the case where ksoftirqd needs to be preempted as a result of
new task wakeup or slice expiry.
In case of PREEMPT_RT or threadirqs, although the idle load balancing
may be inhibited in some cases on the ilb CPU, the fact that ksoftirqd
is the only fair task going back to sleep will trigger a newidle balance
on the CPU which will alleviate some imbalance if it exists if idle
balance fails to do so.
Fixes: b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119054432.6405-4-kprateek.nayak@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ea9cffc0a154124821531991d5afdd7e8b20d7aa ]
The need_resched() check currently in nohz_csd_func() can be tracked
to have been added in scheduler_ipi() back in 2011 via commit
ca38062e57e9 ("sched: Use resched IPI to kick off the nohz idle balance")
Since then, it has travelled quite a bit but it seems like an idle_cpu()
check currently is sufficient to detect the need to bail out from an
idle load balancing. To justify this removal, consider all the following
case where an idle load balancing could race with a task wakeup:
o Since commit f3dd3f674555b ("sched: Remove the limitation of WF_ON_CPU
on wakelist if wakee cpu is idle") a target perceived to be idle
(target_rq->nr_running == 0) will return true for
ttwu_queue_cond(target) which will offload the task wakeup to the idle
target via an IPI.
In all such cases target_rq->ttwu_pending will be set to 1 before
queuing the wake function.
If an idle load balance races here, following scenarios are possible:
- The CPU is not in TIF_POLLING_NRFLAG mode in which case an actual
IPI is sent to the CPU to wake it out of idle. If the
nohz_csd_func() queues before sched_ttwu_pending(), the idle load
balance will bail out since idle_cpu(target) returns 0 since
target_rq->ttwu_pending is 1. If the nohz_csd_func() is queued after
sched_ttwu_pending() it should see rq->nr_running to be non-zero and
bail out of idle load balancing.
- The CPU is in TIF_POLLING_NRFLAG mode and instead of an actual IPI,
the sender will simply set TIF_NEED_RESCHED for the target to put it
out of idle and flush_smp_call_function_queue() in do_idle() will
execute the call function. Depending on the ordering of the queuing
of nohz_csd_func() and sched_ttwu_pending(), the idle_cpu() check in
nohz_csd_func() should either see target_rq->ttwu_pending = 1 or
target_rq->nr_running to be non-zero if there is a genuine task
wakeup racing with the idle load balance kick.
o The waker CPU perceives the target CPU to be busy
(targer_rq->nr_running != 0) but the CPU is in fact going idle and due
to a series of unfortunate events, the system reaches a case where the
waker CPU decides to perform the wakeup by itself in ttwu_queue() on
the target CPU but target is concurrently selected for idle load
balance (XXX: Can this happen? I'm not sure, but we'll consider the
mother of all coincidences to estimate the worst case scenario).
ttwu_do_activate() calls enqueue_task() which would increment
"rq->nr_running" post which it calls wakeup_preempt() which is
responsible for setting TIF_NEED_RESCHED (via a resched IPI or by
setting TIF_NEED_RESCHED on a TIF_POLLING_NRFLAG idle CPU) The key
thing to note in this case is that rq->nr_running is already non-zero
in case of a wakeup before TIF_NEED_RESCHED is set which would
lead to idle_cpu() check returning false.
In all cases, it seems that need_resched() check is unnecessary when
checking for idle_cpu() first since an impending wakeup racing with idle
load balancer will either set the "rq->ttwu_pending" or indicate a newly
woken task via "rq->nr_running".
Chasing the reason why this check might have existed in the first place,
I came across Peter's suggestion on the fist iteration of Suresh's
patch from 2011 [1] where the condition to raise the SCHED_SOFTIRQ was:
sched_ttwu_do_pending(list);
if (unlikely((rq->idle == current) &&
rq->nohz_balance_kick &&
!need_resched()))
raise_softirq_irqoff(SCHED_SOFTIRQ);
Since the condition to raise the SCHED_SOFIRQ was preceded by
sched_ttwu_do_pending() (which is equivalent of sched_ttwu_pending()) in
the current upstream kernel, the need_resched() check was necessary to
catch a newly queued task. Peter suggested modifying it to:
if (idle_cpu() && rq->nohz_balance_kick && !need_resched())
raise_softirq_irqoff(SCHED_SOFTIRQ);
where idle_cpu() seems to have replaced "rq->idle == current" check.
Even back then, the idle_cpu() check would have been sufficient to catch
a new task being enqueued. Since commit b2a02fc43a1f ("smp: Optimize
send_call_function_single_ipi()") overloads the interpretation of
TIF_NEED_RESCHED for TIF_POLLING_NRFLAG idling, remove the
need_resched() check in nohz_csd_func() to raise SCHED_SOFTIRQ based
on Peter's suggestion.
Fixes: b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119054432.6405-3-kprateek.nayak@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 70ee7947a29029736a1a06c73a48ff37674a851b ]
Commit 8f9ea86fdf99b added some logic to sched_setaffinity that included
a WARN when a per-task affinity assignment races with a cpuset update.
Specifically, we can have a race where a cpuset update results in the
task affinity no longer being a subset of the cpuset. That's fine; we
have a fallback to instead use the cpuset mask. However, we have a WARN
set up that will trigger if the cpuset mask has no overlap at all with
the requested task affinity. This shouldn't be a warning condition; its
trivial to create this condition.
Reproduced the warning by the following setup:
- $PID inside a cpuset cgroup
- another thread repeatedly switching the cpuset cpus from 1-2 to just 1
- another thread repeatedly setting the $PID affinity (via taskset) to 2
Fixes: 8f9ea86fdf99b ("sched: Always preserve the user requested cpumask")
Signed-off-by: Josh Don <joshdon@google.com>
Acked-and-tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Tested-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Link: https://lkml.kernel.org/r/20241111182738.1832953-1-joshdon@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6ce5a6f0a07d37cc377df08a8d8a9c283420f323 ]
The issue that unrelated function name is shown on stack trace like
following even though it should be trampoline code address is caused by
the creation of trampoline code in the area where .init.text section
of module was freed after module is loaded.
bash-1344 [002] ..... 43.644608: <stack trace>
=> (MODULE INIT FUNCTION)
=> vfs_write
=> ksys_write
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
To resolve this, when function address of stack trace entry is in
trampoline, output without looking up symbol name.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241021071454.34610-2-tatsuya.s2862@gmail.com
Signed-off-by: Tatsuya S <tatsuya.s2862@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f44ec8733a8469143fde1984b5e6931b2e2f6f3f ]
In general, BPF link's underlying BPF program should be considered to be
reachable through attach hook -> link -> prog chain, and, pessimistically,
we have to assume that as long as link's memory is not safe to free,
attach hook's code might hold a pointer to BPF program and use it.
As such, it's not (generally) correct to put link's program early before
waiting for RCU GPs to go through. More eager bpf_prog_put() that we
currently do is mostly correct due to BPF program's release code doing
similar RCU GP waiting, but as will be shown in the following patches,
BPF program can be non-sleepable (and, thus, reliant on only "classic"
RCU GP), while BPF link's attach hook can have sleepable semantics and
needs to be protected by RCU Tasks Trace, and for such cases BPF link
has to go through RCU Tasks Trace + "classic" RCU GPs before being
deallocated. And so, if we put BPF program early, we might free BPF
program before we free BPF link, leading to use-after-free situation.
So, this patch defers bpf_prog_put() until we are ready to perform
bpf_link's deallocation. At worst, this delays BPF program freeing by
one extra RCU GP, but that seems completely acceptable. Alternatively,
we'd need more elaborate ways to determine BPF hook, BPF link, and BPF
program lifetimes, and how they relate to each other, which seems like
an unnecessary complication.
Note, for most BPF links we still will perform eager bpf_prog_put() and
link dealloc, so for those BPF links there are no observable changes
whatsoever. Only BPF links that use deferred dealloc might notice
slightly delayed freeing of BPF programs.
Also, to reduce code and logic duplication, extract program put + link
dealloc logic into bpf_link_dealloc() helper.
Link: https://lore.kernel.org/20241101181754.782341-1-andrii@kernel.org
Tested-by: Jordan Rife <jrife@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b237e1f7d2273fdcffac20100b72c002bdd770dd ]
The function rb_check_pages() validates the integrity of a specified
per-CPU tracing ring buffer. It does so by traversing the underlying
linked list and checking its next and prev links.
To guarantee that the list isn't modified during the check, a caller
typically needs to take cpu_buffer->reader_lock. This prevents the check
from running concurrently, for example, with a potential reader which
can make the list temporarily inconsistent when swapping its old reader
page into the buffer.
A problem with this approach is that the time when interrupts are
disabled is non-deterministic, dependent on the ring buffer size. This
particularly affects PREEMPT_RT because the reader_lock is a raw
spinlock which doesn't become sleepable on PREEMPT_RT kernels.
Modify the check so it still attempts to traverse the entire list, but
gives up the reader_lock between checking individual pages. Introduce
for this purpose a new variable ring_buffer_per_cpu.cnt which is bumped
any time the list is modified. The value is used by rb_check_pages() to
detect such a change and restart the check.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241015112810.27203-1-petr.pavlu@suse.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eb887c4567d1b0e7684c026fe7df44afa96589e6 ]
Use atomic64_inc_return(&ref) instead of atomic64_add_return(1, &ref)
to use optimized implementation and ease register pressure around
the primitive for targets that implement optimized variant.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241007085651.48544-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 13d750c2c03e9861e15268574ed2c239cca9c9d5 ]
In preparation for allowing system call enter/exit instrumentation to
handle page faults, make sure that ftrace can handle this change by
explicitly disabling preemption within the ftrace system call tracepoint
probes to respect the current expectations within ftrace ring buffer
code.
This change does not yet allow ftrace to take page faults per se within
its probe, but allows its existing probes to adapt to the upcoming
change.
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: bpf@vger.kernel.org
Cc: Joel Fernandes <joel@joelfernandes.org>
Link: https://lore.kernel.org/20241009010718.2050182-3-mathieu.desnoyers@efficios.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b9e9ed90b10c82a4e9d4d70a2890f06bfcdd3b78 ]
For htab of maps, when the map is removed from the htab, it may hold the
last reference of the map. bpf_map_fd_put_ptr() will invoke
bpf_map_free_id() to free the id of the removed map element. However,
bpf_map_fd_put_ptr() is invoked while holding a bucket lock
(raw_spin_lock_t), and bpf_map_free_id() attempts to acquire map_idr_lock
(spinlock_t), triggering the following lockdep warning:
=============================
[ BUG: Invalid wait context ]
6.11.0-rc4+ #49 Not tainted
-----------------------------
test_maps/4881 is trying to lock:
ffffffff84884578 (map_idr_lock){+...}-{3:3}, at: bpf_map_free_id.part.0+0x21/0x70
other info that might help us debug this:
context-{5:5}
2 locks held by test_maps/4881:
#0: ffffffff846caf60 (rcu_read_lock){....}-{1:3}, at: bpf_fd_htab_map_update_elem+0xf9/0x270
#1: ffff888149ced148 (&htab->lockdep_key#2){....}-{2:2}, at: htab_map_update_elem+0x178/0xa80
stack backtrace:
CPU: 0 UID: 0 PID: 4881 Comm: test_maps Not tainted 6.11.0-rc4+ #49
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ...
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xb0
dump_stack+0x10/0x20
__lock_acquire+0x73e/0x36c0
lock_acquire+0x182/0x450
_raw_spin_lock_irqsave+0x43/0x70
bpf_map_free_id.part.0+0x21/0x70
bpf_map_put+0xcf/0x110
bpf_map_fd_put_ptr+0x9a/0xb0
free_htab_elem+0x69/0xe0
htab_map_update_elem+0x50f/0xa80
bpf_fd_htab_map_update_elem+0x131/0x270
htab_map_update_elem+0x50f/0xa80
bpf_fd_htab_map_update_elem+0x131/0x270
bpf_map_update_value+0x266/0x380
__sys_bpf+0x21bb/0x36b0
__x64_sys_bpf+0x45/0x60
x64_sys_call+0x1b2a/0x20d0
do_syscall_64+0x5d/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
One way to fix the lockdep warning is using raw_spinlock_t for
map_idr_lock as well. However, bpf_map_alloc_id() invokes
idr_alloc_cyclic() after acquiring map_idr_lock, it will trigger a
similar lockdep warning because the slab's lock (s->cpu_slab->lock) is
still a spinlock.
Instead of changing map_idr_lock's type, fix the issue by invoking
htab_put_fd_value() after htab_unlock_bucket(). However, only deferring
the invocation of htab_put_fd_value() is not enough, because the old map
pointers in htab of maps can not be saved during batched deletion.
Therefore, also defer the invocation of free_htab_elem(), so these
to-be-freed elements could be linked together similar to lru map.
There are four callers for ->map_fd_put_ptr:
(1) alloc_htab_elem() (through htab_put_fd_value())
It invokes ->map_fd_put_ptr() under a raw_spinlock_t. The invocation of
htab_put_fd_value() can not simply move after htab_unlock_bucket(),
because the old element has already been stashed in htab->extra_elems.
It may be reused immediately after htab_unlock_bucket() and the
invocation of htab_put_fd_value() after htab_unlock_bucket() may release
the newly-added element incorrectly. Therefore, saving the map pointer
of the old element for htab of maps before unlocking the bucket and
releasing the map_ptr after unlock. Beside the map pointer in the old
element, should do the same thing for the special fields in the old
element as well.
(2) free_htab_elem() (through htab_put_fd_value())
Its caller includes __htab_map_lookup_and_delete_elem(),
htab_map_delete_elem() and __htab_map_lookup_and_delete_batch().
For htab_map_delete_elem(), simply invoke free_htab_elem() after
htab_unlock_bucket(). For __htab_map_lookup_and_delete_batch(), just
like lru map, linking the to-be-freed element into node_to_free list
and invoking free_htab_elem() for these element after unlock. It is safe
to reuse batch_flink as the link for node_to_free, because these
elements have been removed from the hash llist.
Because htab of maps doesn't support lookup_and_delete operation,
__htab_map_lookup_and_delete_elem() doesn't have the problem, so kept
it as is.
(3) fd_htab_map_free()
It invokes ->map_fd_put_ptr without raw_spinlock_t.
(4) bpf_fd_htab_map_update_elem()
It invokes ->map_fd_put_ptr without raw_spinlock_t.
After moving free_htab_elem() outside htab bucket lock scope, using
pcpu_freelist_push() instead of __pcpu_freelist_push() to disable
the irq before freeing elements, and protecting the invocations of
bpf_mem_cache_free() with migrate_{disable|enable} pair.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241106063542.357743-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7543c3e3b9b88212fcd0aaf5cab5588797bdc7de ]
radix_lock() shouldn't be held while holding dma_hash_entry[idx].lock
otherwise, there's a possible deadlock scenario when
dma debug API is called holding rq_lock():
CPU0 CPU1 CPU2
dma_free_attrs()
check_unmap() add_dma_entry() __schedule() //out
(A) rq_lock()
get_hash_bucket()
(A) dma_entry_hash
check_sync()
(A) radix_lock() (W) dma_entry_hash
dma_entry_free()
(W) radix_lock()
// CPU2's one
(W) rq_lock()
CPU1 situation can happen when it extending radix tree and
it tries to wake up kswapd via wake_all_kswapd().
CPU2 situation can happen while perf_event_task_sched_out()
(i.e. dma sync operation is called while deleting perf_event using
etm and etr tmc which are Arm Coresight hwtracing driver backends).
To remove this possible situation, call dma_entry_free() after
put_hash_bucket() in check_unmap().
Reported-by: Denis Nikitin <denik@chromium.org>
Closes: https://lists.linaro.org/archives/list/coresight@lists.linaro.org/thread/2WMS7BBSF5OZYB63VT44U5YWLFP5HL6U/#RWM6MLQX5ANBTEQ2PRM7OXCBGCE6NPWU
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d6083f040d5d8f8d748462c77e90547097df936e ]
There is a potential infinite loop issue that can occur when using a
combination of tail calls and freplace.
In an upcoming selftest, the attach target for entry_freplace of
tailcall_freplace.c is subprog_tc of tc_bpf2bpf.c, while the tail call in
entry_freplace leads to entry_tc. This results in an infinite loop:
entry_tc -> subprog_tc -> entry_freplace --tailcall-> entry_tc.
The problem arises because the tail_call_cnt in entry_freplace resets to
zero each time entry_freplace is executed, causing the tail call mechanism
to never terminate, eventually leading to a kernel panic.
To fix this issue, the solution is twofold:
1. Prevent updating a program extended by an freplace program to a
prog_array map.
2. Prevent extending a program that is already part of a prog_array map
with an freplace program.
This ensures that:
* If a program or its subprogram has been extended by an freplace program,
it can no longer be updated to a prog_array map.
* If a program has been added to a prog_array map, neither it nor its
subprograms can be extended by an freplace program.
Moreover, an extension program should not be tailcalled. As such, return
-EINVAL if the program has a type of BPF_PROG_TYPE_EXT when adding it to a
prog_array map.
Additionally, fix a minor code style issue by replacing eight spaces with a
tab for proper formatting.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20241015150207.70264-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f39489fea677ad78ca4ce1ab2d204a6639b868dc ]
When getting an LLC CPU mask in the default CPU selection policy,
scx_select_cpu_dfl(), a pointer to the sched_domain is dereferenced
using rcu_read_lock() without holding rcu_read_lock(). Such an unprotected
dereference often causes the following warning and can cause an invalid
memory access in the worst case.
Therefore, protect dereference of a sched_domain pointer using a pair
of rcu_read_lock() and unlock().
[ 20.996135] =============================
[ 20.996345] WARNING: suspicious RCU usage
[ 20.996563] 6.11.0-virtme #17 Tainted: G W
[ 20.996576] -----------------------------
[ 20.996576] kernel/sched/ext.c:3323 suspicious rcu_dereference_check() usage!
[ 20.996576]
[ 20.996576] other info that might help us debug this:
[ 20.996576]
[ 20.996576]
[ 20.996576] rcu_scheduler_active = 2, debug_locks = 1
[ 20.996576] 4 locks held by kworker/8:1/140:
[ 20.996576] #0: ffff8b18c00dd348 ((wq_completion)pm){+.+.}-{0:0}, at: process_one_work+0x4a0/0x590
[ 20.996576] #1: ffffb3da01f67e58 ((work_completion)(&dev->power.work)){+.+.}-{0:0}, at: process_one_work+0x1ba/0x590
[ 20.996576] #2: ffffffffa316f9f0 (&rcu_state.gp_wq){..-.}-{2:2}, at: swake_up_one+0x15/0x60
[ 20.996576] #3: ffff8b1880398a60 (&p->pi_lock){-.-.}-{2:2}, at: try_to_wake_up+0x59/0x7d0
[ 20.996576]
[ 20.996576] stack backtrace:
[ 20.996576] CPU: 8 UID: 0 PID: 140 Comm: kworker/8:1 Tainted: G W 6.11.0-virtme #17
[ 20.996576] Tainted: [W]=WARN
[ 20.996576] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 20.996576] Workqueue: pm pm_runtime_work
[ 20.996576] Sched_ext: simple (disabling+all), task: runnable_at=-6ms
[ 20.996576] Call Trace:
[ 20.996576] <IRQ>
[ 20.996576] dump_stack_lvl+0x6f/0xb0
[ 20.996576] lockdep_rcu_suspicious.cold+0x4e/0x96
[ 20.996576] scx_select_cpu_dfl+0x234/0x260
[ 20.996576] select_task_rq_scx+0xfb/0x190
[ 20.996576] select_task_rq+0x47/0x110
[ 20.996576] try_to_wake_up+0x110/0x7d0
[ 20.996576] swake_up_one+0x39/0x60
[ 20.996576] rcu_core+0xb08/0xe50
[ 20.996576] ? srso_alias_return_thunk+0x5/0xfbef5
[ 20.996576] ? mark_held_locks+0x40/0x70
[ 20.996576] handle_softirqs+0xd3/0x410
[ 20.996576] irq_exit_rcu+0x78/0xa0
[ 20.996576] sysvec_apic_timer_interrupt+0x73/0x80
[ 20.996576] </IRQ>
[ 20.996576] <TASK>
[ 20.996576] asm_sysvec_apic_timer_interrupt+0x1a/0x20
[ 20.996576] RIP: 0010:_raw_spin_unlock_irqrestore+0x36/0x70
[ 20.996576] Code: f5 53 48 8b 74 24 10 48 89 fb 48 83 c7 18 e8 11 b4 36 ff 48 89 df e8 99 0d 37 ff f7 c5 00 02 00 00 75 17 9c 58 f6 c4 02 75 2b <65> ff 0d 5b 55 3c 5e 74 16 5b 5d e9 95 8e 28 00 e8 a5 ee 44 ff 9c
[ 20.996576] RSP: 0018:ffffb3da01f67d20 EFLAGS: 00000246
[ 20.996576] RAX: 0000000000000002 RBX: ffffffffa4640220 RCX: 0000000000000040
[ 20.996576] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa1c7b27b
[ 20.996576] RBP: 0000000000000246 R08: 0000000000000001 R09: 0000000000000000
[ 20.996576] R10: 0000000000000001 R11: 000000000000021c R12: 0000000000000246
[ 20.996576] R13: ffff8b1881363958 R14: 0000000000000000 R15: ffff8b1881363800
[ 20.996576] ? _raw_spin_unlock_irqrestore+0x4b/0x70
[ 20.996576] serial_port_runtime_resume+0xd4/0x1a0
[ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10
[ 20.996576] __rpm_callback+0x44/0x170
[ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10
[ 20.996576] rpm_callback+0x55/0x60
[ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10
[ 20.996576] rpm_resume+0x582/0x7b0
[ 20.996576] pm_runtime_work+0x7c/0xb0
[ 20.996576] process_one_work+0x1fb/0x590
[ 20.996576] worker_thread+0x18e/0x350
[ 20.996576] ? __pfx_worker_thread+0x10/0x10
[ 20.996576] kthread+0xe2/0x110
[ 20.996576] ? __pfx_kthread+0x10/0x10
[ 20.996576] ret_from_fork+0x34/0x50
[ 20.996576] ? __pfx_kthread+0x10/0x10
[ 20.996576] ret_from_fork_asm+0x1a/0x30
[ 20.996576] </TASK>
[ 21.056592] sched_ext: BPF scheduler "simple" disabled (unregistered from user space)
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c163e40af9b2331b2c629fd4ec8b703ed4d4ae39 ]
clocksource_delta() has two variants. One with a check for negative motion,
which is only selected by x86. This is a historic leftover as this function
was previously used in the time getter hot paths.
Since 135225a363ae timekeeping_cycles_to_ns() has unconditional protection
against this as a by-product of the protection against 64bit math overflow.
clocksource_delta() is only used in the clocksource watchdog and in
timekeeping_advance(). The extra conditional there is not hurting anyone.
Remove the config option and unconditionally prevent negative motion of the
readout.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241031120328.599430157@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 59458fa4ddb47e7891c61b4a928d13d5f5b00aa0 ]
Ran Xiaokai reports that with a KCSAN-enabled PREEMPT_RT kernel, we can see
splats like:
| BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
| in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
| preempt_count: 10002, expected: 0
| RCU nest depth: 0, expected: 0
| no locks held by swapper/1/0.
| irq event stamp: 156674
| hardirqs last enabled at (156673): [<ffffffff81130bd9>] do_idle+0x1f9/0x240
| hardirqs last disabled at (156674): [<ffffffff82254f84>] sysvec_apic_timer_interrupt+0x14/0xc0
| softirqs last enabled at (0): [<ffffffff81099f47>] copy_process+0xfc7/0x4b60
| softirqs last disabled at (0): [<0000000000000000>] 0x0
| Preemption disabled at:
| [<ffffffff814a3e2a>] paint_ptr+0x2a/0x90
| CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.11.0+ #3
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
| Call Trace:
| <IRQ>
| dump_stack_lvl+0x7e/0xc0
| dump_stack+0x1d/0x30
| __might_resched+0x1a2/0x270
| rt_spin_lock+0x68/0x170
| kcsan_skip_report_debugfs+0x43/0xe0
| print_report+0xb5/0x590
| kcsan_report_known_origin+0x1b1/0x1d0
| kcsan_setup_watchpoint+0x348/0x650
| __tsan_unaligned_write1+0x16d/0x1d0
| hrtimer_interrupt+0x3d6/0x430
| __sysvec_apic_timer_interrupt+0xe8/0x3a0
| sysvec_apic_timer_interrupt+0x97/0xc0
| </IRQ>
On a detected data race, KCSAN's reporting logic checks if it should
filter the report. That list is protected by the report_filterlist_lock
*non-raw* spinlock which may sleep on RT kernels.
Since KCSAN may report data races in any context, convert it to a
raw_spinlock.
This requires being careful about when to allocate memory for the filter
list itself which can be done via KCSAN's debugfs interface. Concurrent
modification of the filter list via debugfs should be rare: the chosen
strategy is to optimistically pre-allocate memory before the critical
section and discard if unused.
Link: https://lore.kernel.org/all/20240925143154.2322926-1-ranxiaokai627@163.com/
Reported-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Tested-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 5f1b64e9a9b7ee9cfd32c6b2fab796e29bfed075 upstream.
[Problem Description]
When running the hackbench program of LTP, the following memory leak is
reported by kmemleak.
# /opt/ltp/testcases/bin/hackbench 20 thread 1000
Running with 20*40 (== 800) tasks.
# dmesg | grep kmemleak
...
kmemleak: 480 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
kmemleak: 665 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff888cd8ca2c40 (size 64):
comm "hackbench", pid 17142, jiffies 4299780315
hex dump (first 32 bytes):
ac 74 49 00 01 00 00 00 4c 84 49 00 01 00 00 00 .tI.....L.I.....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc bff18fd4):
[<ffffffff81419a89>] __kmalloc_cache_noprof+0x2f9/0x3f0
[<ffffffff8113f715>] task_numa_work+0x725/0xa00
[<ffffffff8110f878>] task_work_run+0x58/0x90
[<ffffffff81ddd9f8>] syscall_exit_to_user_mode+0x1c8/0x1e0
[<ffffffff81dd78d5>] do_syscall_64+0x85/0x150
[<ffffffff81e0012b>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
This issue can be consistently reproduced on three different servers:
* a 448-core server
* a 256-core server
* a 192-core server
[Root Cause]
Since multiple threads are created by the hackbench program (along with
the command argument 'thread'), a shared vma might be accessed by two or
more cores simultaneously. When two or more cores observe that
vma->numab_state is NULL at the same time, vma->numab_state will be
overwritten.
Although current code ensures that only one thread scans the VMAs in a
single 'numa_scan_period', there might be a chance for another thread
to enter in the next 'numa_scan_period' while we have not gotten till
numab_state allocation [1].
Note that the command `/opt/ltp/testcases/bin/hackbench 50 process 1000`
cannot the reproduce the issue. It is verified with 200+ test runs.
[Solution]
Use the cmpxchg atomic operation to ensure that only one thread executes
the vma->numab_state assignment.
[1] https://lore.kernel.org/lkml/1794be3c-358c-4cdc-a43d-a1f841d91ef7@amd.com/
Link: https://lkml.kernel.org/r/20241113102146.2384-1-ahuang12@lenovo.com
Fixes: ef6a22b70f6d ("sched/numa: apply the scan delay to every new vma")
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Reported-by: Jiwei Sun <sunjw10@lenovo.com>
Reviewed-by: Raghavendra K T <raghavendra.kt@amd.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Ben Segall <bsegall@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ab244dd7cf4c291f82faacdc50b45cc0f55b674d upstream.
Jordy reported issue against XSKMAP which also applies to DEVMAP - the
index used for accessing map entry, due to being a signed integer,
causes the OOB writes. Fix is simple as changing the type from int to
u32, however, when compared to XSKMAP case, one more thing needs to be
addressed.
When map is released from system via dev_map_free(), we iterate through
all of the entries and an iterator variable is also an int, which
implies OOB accesses. Again, change it to be u32.
Example splat below:
[ 160.724676] BUG: unable to handle page fault for address: ffffc8fc2c001000
[ 160.731662] #PF: supervisor read access in kernel mode
[ 160.736876] #PF: error_code(0x0000) - not-present page
[ 160.742095] PGD 0 P4D 0
[ 160.744678] Oops: Oops: 0000 [#1] PREEMPT SMP
[ 160.749106] CPU: 1 UID: 0 PID: 520 Comm: kworker/u145:12 Not tainted 6.12.0-rc1+ #487
[ 160.757050] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[ 160.767642] Workqueue: events_unbound bpf_map_free_deferred
[ 160.773308] RIP: 0010:dev_map_free+0x77/0x170
[ 160.777735] Code: 00 e8 fd 91 ed ff e8 b8 73 ed ff 41 83 7d 18 19 74 6e 41 8b 45 24 49 8b bd f8 00 00 00 31 db 85 c0 74 48 48 63 c3 48 8d 04 c7 <48> 8b 28 48 85 ed 74 30 48 8b 7d 18 48 85 ff 74 05 e8 b3 52 fa ff
[ 160.796777] RSP: 0018:ffffc9000ee1fe38 EFLAGS: 00010202
[ 160.802086] RAX: ffffc8fc2c001000 RBX: 0000000080000000 RCX: 0000000000000024
[ 160.809331] RDX: 0000000000000000 RSI: 0000000000000024 RDI: ffffc9002c001000
[ 160.816576] RBP: 0000000000000000 R08: 0000000000000023 R09: 0000000000000001
[ 160.823823] R10: 0000000000000001 R11: 00000000000ee6b2 R12: dead000000000122
[ 160.831066] R13: ffff88810c928e00 R14: ffff8881002df405 R15: 0000000000000000
[ 160.838310] FS: 0000000000000000(0000) GS:ffff8897e0c40000(0000) knlGS:0000000000000000
[ 160.846528] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 160.852357] CR2: ffffc8fc2c001000 CR3: 0000000005c32006 CR4: 00000000007726f0
[ 160.859604] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 160.866847] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 160.874092] PKRU: 55555554
[ 160.876847] Call Trace:
[ 160.879338] <TASK>
[ 160.881477] ? __die+0x20/0x60
[ 160.884586] ? page_fault_oops+0x15a/0x450
[ 160.888746] ? search_extable+0x22/0x30
[ 160.892647] ? search_bpf_extables+0x5f/0x80
[ 160.896988] ? exc_page_fault+0xa9/0x140
[ 160.900973] ? asm_exc_page_fault+0x22/0x30
[ 160.905232] ? dev_map_free+0x77/0x170
[ 160.909043] ? dev_map_free+0x58/0x170
[ 160.912857] bpf_map_free_deferred+0x51/0x90
[ 160.917196] process_one_work+0x142/0x370
[ 160.921272] worker_thread+0x29e/0x3b0
[ 160.925082] ? rescuer_thread+0x4b0/0x4b0
[ 160.929157] kthread+0xd4/0x110
[ 160.932355] ? kthread_park+0x80/0x80
[ 160.936079] ret_from_fork+0x2d/0x50
[ 160.943396] ? kthread_park+0x80/0x80
[ 160.950803] ret_from_fork_asm+0x11/0x20
[ 160.958482] </TASK>
Fixes: 546ac1ffb70d ("bpf: add devmap, a map for storing net device references")
CC: stable@vger.kernel.org
Reported-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Jordy Zomer <jordyzomer@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20241122121030.716788-3-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e63fbd5f6810ed756bbb8a1549c7d4132968baa9 upstream.
The cmp_entries_dup() function used as the comparator for sort()
violated the symmetry and transitivity properties required by the
sorting algorithm. Specifically, it returned 1 whenever memcmp() was
non-zero, which broke the following expectations:
* Symmetry: If x < y, then y > x.
* Transitivity: If x < y and y < z, then x < z.
These violations could lead to incorrect sorting and failure to
correctly identify duplicate elements.
Fix the issue by directly returning the result of memcmp(), which
adheres to the required comparison properties.
Cc: stable@vger.kernel.org
Fixes: 08d43a5fa063 ("tracing: Add lock-free tracing_map")
Link: https://lore.kernel.org/20241203202228.1274403-1-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 27abc7b3fa2e09bbe41e2924d328121546865eda ]
trie_get_next_key() uses node->prefixlen == key->prefixlen to identify
an exact match, However, it is incorrect because when the target key
doesn't fully match the found node (e.g., node->prefixlen != matchlen),
these two nodes may also have the same prefixlen. It will return
expected result when the passed key exist in the trie. However when a
recently-deleted key or nonexistent key is passed to
trie_get_next_key(), it may skip keys and return incorrect result.
Fix it by using node->prefixlen == matchlen to identify exact matches.
When the condition is true after the search, it also implies
node->prefixlen equals key->prefixlen, otherwise, the search would
return NULL instead.
Fixes: b471f2f1de8b ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE map")
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-6-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 532d6b36b2bfac5514426a97a4df8d103d700d43 ]
When a LPM trie is full, in-place updates of existing elements
incorrectly return -ENOSPC.
Fix this by deferring the check of trie->n_entries. For new insertions,
n_entries must not exceed max_entries. However, in-place updates are
allowed even when the trie is full.
Fixes: b95a5c4db09b ("bpf: add a longest prefix match trie map implementation")
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3d5611b4d7efbefb85a74fcdbc35c603847cc022 ]
There is no need to call kfree(im_node) when updating element fails,
because im_node must be NULL. Remove the unnecessary kfree() for
im_node.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 532d6b36b2bf ("bpf: Handle in-place update for full LPM trie correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eae6a075e9537dd69891cf77ca5a88fa8a28b4a1 ]
Add the currently missing handling for the BPF_EXIST and BPF_NOEXIST
flags. These flags can be specified by users and are relevant since LPM
trie supports exact matches during update.
Fixes: b95a5c4db09b ("bpf: add a longest prefix match trie map implementation")
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b0e66977dc072906bb76555fb1a64261d7f63d0f ]
When CAP_PERFMON and CAP_SYS_ADMIN (allow_ptr_leaks) are disabled, the
verifier aims to reject partial overwrite on an 8-byte stack slot that
contains a spilled pointer.
However, in such a scenario, it rejects all partial stack overwrites as
long as the targeted stack slot is a spilled register, because it does
not check if the stack slot is a spilled pointer.
Incomplete checks will result in the rejection of valid programs, which
spill narrower scalar values onto scalar slots, as shown below.
0: R1=ctx() R10=fp0
; asm volatile ( @ repro.bpf.c:679
0: (7a) *(u64 *)(r10 -8) = 1 ; R10=fp0 fp-8_w=1
1: (62) *(u32 *)(r10 -8) = 1
attempt to corrupt spilled pointer on stack
processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0.
Fix this by expanding the check to not consider spilled scalar registers
when rejecting the write into the stack.
Previous discussion on this patch is at link [0].
[0]: https://lore.kernel.org/bpf/20240403202409.2615469-1-tao.lyu@epfl.ch
Fixes: ab125ed3ec1c ("bpf: fix check for attempt to corrupt spilled pointer")
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Tao Lyu <tao.lyu@epfl.ch>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241204044757.1483141-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 69772f509e084ec6bca12dbcdeeeff41b0103774 ]
Inside mark_stack_slot_misc, we should not upgrade STACK_INVALID to
STACK_MISC when allow_ptr_leaks is false, since invalid contents
shouldn't be read unless the program has the relevant capabilities.
The relaxation only makes sense when env->allow_ptr_leaks is true.
However, such conversion in privileged mode becomes unnecessary, as
invalid slots can be read without being upgraded to STACK_MISC.
Currently, the condition is inverted (i.e. checking for true instead of
false), simply remove it to restore correct behavior.
Fixes: eaf18febd6eb ("bpf: preserve STACK_ZERO slots on partial reg spills")
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reported-by: Tao Lyu <tao.lyu@epfl.ch>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241204044757.1483141-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 12659d28615d606b36e382f4de2dd05550d202af ]
Currently, KF_ARG_PTR_TO_ITER handling missed checking the reg->type and
ensuring it is PTR_TO_STACK. Instead of enforcing this in the caller of
process_iter_arg, move the check into it instead so that all callers
will gain the check by default. This is similar to process_dynptr_func.
An existing selftest in verifier_bits_iter.c fails due to this change,
but it's because it was passing a NULL pointer into iter_next helper and
getting an error further down the checks, but probably meant to pass an
uninitialized iterator on the stack (as is done in the subsequent test
below it). We will gain coverage for non-PTR_TO_STACK arguments in later
patches hence just change the declaration to zero-ed stack object.
Fixes: 06accc8779c1 ("bpf: add support for open-coded iterator loops")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Tao Lyu <tao.lyu@epfl.ch>
[ Kartikeya: move check into process_iter_arg, rewrite commit log ]
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241203000238.3602922-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f5807b0606da7ac7c1b74a386b22134ec7702d05 upstream.
Due to an unsigned cast, adjtimex() returns the wrong offest when using
ADJ_MICRO and the offset is negative. In this case a small negative offset
returns approximately 4.29 seconds (~ 2^32/1000 milliseconds) due to the
unsigned cast of the negative offset.
This cast was added when the kernel internal struct timex was changed to
use type long long for the time offset value to address the problem of a
64bit/32bit division on 32bit systems.
The correct cast would have been (s32), which is correct as time_offset can
only be in the range of [INT_MIN..INT_MAX] because the shift constant used
for calculating it is 32. But that's non-obvious.
Remove the cast and use div_s64() to cure the issue.
[ tglx: Fix white space damage, use div_s64() and amend the change log ]
Fixes: ead25417f82e ("timex: use __kernel_timex internally")
Signed-off-by: Marcelo Dalmas <marcelo.dalmas@ge.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/SJ0P101MB03687BF7D5A10FD3C49C51E5F42E2@SJ0P101MB0368.NAMP101.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 63dffecfba3eddcf67a8f76d80e0c141f93d44a5 upstream.
A sigqueue belonging to a posix timer, which target is not a specific
thread but a whole thread group, is preferrably targeted to the current
task if it is part of that thread group.
However nothing prevents a posix timer event from queueing such a
sigqueue from a reaped yet running task. The interruptible code space
between exit_notify() and the final call to schedule() is enough for
posix_timer_fn() hrtimer to fire.
If that happens while the current task is part of the thread group
target, it is proposed to handle it but since its sighand pointer may
have been cleared already, the sigqueue is dropped even if there are
other tasks running within the group that could handle it.
As a result posix timers with thread group wide target may miss signals
when some of their threads are exiting.
Fix this with verifying that the current task hasn't been through
exit_notify() before proposing it as a preferred target so as to ensure
that its sighand is still here and stable.
complete_signal() might still reconsider the choice and find a better
target within the group if current has passed retarget_shared_pending()
already.
Fixes: bcb7ee79029d ("posix-timers: Prefer delivery of signals to the current thread")
Reported-by: Anthony Mallet <anthony.mallet@laas.fr>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241122234811.60455-1-frederic@kernel.org
Closes: https://lore.kernel.org/all/26411.57288.238690.681680@gargle.gargle.HOWL
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 45af52e7d3b8560f21d139b3759735eead8b1653 upstream.
When executing the following command:
# echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter
The current mod command causes a null pointer dereference. While commit
0f17976568b3f ("ftrace: Fix regression with module command in stack_trace_filter")
has addressed part of the issue, it left a corner case unhandled, which still
results in a kernel crash.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241120052750.275463-1-guoweikang.kernel@gmail.com
Fixes: 04ec7bb642b77 ("tracing: Have the trace_array hold the list of registered func probes");
Signed-off-by: guoweikang <guoweikang.kernel@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c54a1a06daa78613519b4d24495b0d175b8af63f upstream.
Since the new fgraph requires to initialize fgraph_ops.ops.func_hash before
calling register_ftrace_graph(), initialize it with default (tracing all
functions) parameter.
Cc: stable@vger.kernel.org
Fixes: 5fccc7552ccb ("ftrace: Add subops logic to allow one ops to manage many")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b23decf8ac9102fc52c4de5196f4dc0a5f3eb80b upstream.
Idle tasks are initialized via __sched_fork() twice:
fork_idle()
copy_process()
sched_fork()
__sched_fork()
init_idle()
__sched_fork()
Instead of cleaning this up, sched_ext hacked around it. Even when analyis
and solution were provided in a discussion, nobody cared to clean this up.
init_idle() is also invoked from sched_init() to initialize the boot CPU's
idle task, which requires the __sched_fork() invocation. But this can be
trivially solved by invoking __sched_fork() before init_idle() in
sched_init() and removing the __sched_fork() invocation from init_idle().
Do so and clean up the comments explaining this historical leftover.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241028103142.359584747@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3b832035387ff508fdcf0fba66701afc78f79e3d upstream.
This reverts commit 2a010c41285345da60cece35575b4e0af7e7bf44.
Rui Ueyama <rui314@gmail.com> writes:
> I'm the creator and the maintainer of the mold linker
> (https://github.com/rui314/mold). Recently, we discovered that mold
> started causing process crashes in certain situations due to a change
> in the Linux kernel. Here are the details:
>
> - In general, overwriting an existing file is much faster than
> creating an empty file and writing to it on Linux, so mold attempts to
> reuse an existing executable file if it exists.
>
> - If a program is running, opening the executable file for writing
> previously failed with ETXTBSY. If that happens, mold falls back to
> creating a new file.
>
> - However, the Linux kernel recently changed the behavior so that
> writing to an executable file is now always permitted
> (https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2a010c412853).
>
> That caused mold to write to an executable file even if there's a
> process running that file. Since changes to mmap'ed files are
> immediately visible to other processes, any processes running that
> file would almost certainly crash in a very mysterious way.
> Identifying the cause of these random crashes took us a few days.
>
> Rejecting writes to an executable file that is currently running is a
> well-known behavior, and Linux had operated that way for a very long
> time. So, I don’t believe relying on this behavior was our mistake;
> rather, I see this as a regression in the Linux kernel.
Quoting myself from commit 2a010c412853 ("fs: don't block i_writecount during exec")
> Yes, someone in userspace could potentially be relying on this. It's not
> completely out of the realm of possibility but let's find out if that's
> actually the case and not guess.
It seems we found out that someone is relying on this obscure behavior.
So revert the change.
Link: https://github.com/rui314/mold/issues/1361
Link: https://lore.kernel.org/r/4a2bc207-76be-4715-8e12-7fc45a76a125@leemhuis.info
Cc: <stable@vger.kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit afe5960dc208fe069ddaaeb0994d857b24ac19d1 ]
When a tracepoint event is created with attr.freq = 1,
'hwc->period_left' is not initialized correctly. As a result,
in the perf_swevent_overflow() function, when the first time the event occurs,
it calculates the event overflow and the perf_swevent_set_period() returns 3,
this leads to the event are recorded for three duplicate times.
Step to reproduce:
1. Enable the tracepoint event & starting tracing
$ echo 1 > /sys/kernel/tracing/events/module/module_free
$ echo 1 > /sys/kernel/tracing/tracing_on
2. Record with perf
$ perf record -a --strict-freq -F 1 -e "module:module_free"
3. Trigger module_free event.
$ modprobe -i sunrpc
$ modprobe -r sunrpc
Result:
- Trace pipe result:
$ cat trace_pipe
modprobe-174509 [003] ..... 6504.868896: module_free: sunrpc
- perf sample:
modprobe 174509 [003] 6504.868980: module:module_free: sunrpc
modprobe 174509 [003] 6504.868980: module:module_free: sunrpc
modprobe 174509 [003] 6504.868980: module:module_free: sunrpc
By setting period_left via perf_swevent_set_period() as other sw_event did,
This problem could be solved.
After patch:
- Trace pipe result:
$ cat trace_pipe
modprobe 1153096 [068] 613468.867774: module:module_free: xfs
- perf sample
modprobe 1153096 [068] 613468.867794: module:module_free: xfs
Link: https://lore.kernel.org/20240913021347.595330-1-yeoreum.yun@arm.com
Fixes: bd2b5b12849a ("perf_counter: More aggressive frequency adjustment")
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7c8ce4ffb684676039b1ff9ff81c126794e8d88e ]
Without kernel symbols for struct_ops trampoline, the unwinder may
produce unexpected stacktraces.
For example, the x86 ORC and FP unwinders check if an IP is in kernel
text by verifying the presence of the IP's kernel symbol. When a
struct_ops trampoline address is encountered, the unwinder stops due
to the absence of symbol, resulting in an incomplete stacktrace that
consists only of direct and indirect child functions called from the
trampoline.
The arm64 unwinder is another example. While the arm64 unwinder can
proceed across a struct_ops trampoline address, the corresponding
symbol name is displayed as "unknown", which is confusing.
Thus, add kernel symbol for struct_ops trampoline. The name is
bpf__<struct_ops_name>_<member_name>, where <struct_ops_name> is the
type name of the struct_ops, and <member_name> is the name of
the member that the trampoline is linked to.
Below is a comparison of stacktraces captured on x86 by perf record,
before and after this patch.
Before:
ffffffff8116545d __lock_acquire+0xad ([kernel.kallsyms])
ffffffff81167fcc lock_acquire+0xcc ([kernel.kallsyms])
ffffffff813088f4 __bpf_prog_enter+0x34 ([kernel.kallsyms])
After:
ffffffff811656bd __lock_acquire+0x30d ([kernel.kallsyms])
ffffffff81167fcc lock_acquire+0xcc ([kernel.kallsyms])
ffffffff81309024 __bpf_prog_enter+0x34 ([kernel.kallsyms])
ffffffffc000d7e9 bpf__tcp_congestion_ops_cong_avoid+0x3e ([kernel.kallsyms])
ffffffff81f250a5 tcp_ack+0x10d5 ([kernel.kallsyms])
ffffffff81f27c66 tcp_rcv_established+0x3b6 ([kernel.kallsyms])
ffffffff81f3ad03 tcp_v4_do_rcv+0x193 ([kernel.kallsyms])
ffffffff81d65a18 __release_sock+0xd8 ([kernel.kallsyms])
ffffffff81d65af4 release_sock+0x34 ([kernel.kallsyms])
ffffffff81f15c4b tcp_sendmsg+0x3b ([kernel.kallsyms])
ffffffff81f663d7 inet_sendmsg+0x47 ([kernel.kallsyms])
ffffffff81d5ab40 sock_write_iter+0x160 ([kernel.kallsyms])
ffffffff8149c67b vfs_write+0x3fb ([kernel.kallsyms])
ffffffff8149caf6 ksys_write+0xc6 ([kernel.kallsyms])
ffffffff8149cb5d __x64_sys_write+0x1d ([kernel.kallsyms])
ffffffff81009200 x64_sys_call+0x1d30 ([kernel.kallsyms])
ffffffff82232d28 do_syscall_64+0x68 ([kernel.kallsyms])
ffffffff8240012f entry_SYSCALL_64_after_hwframe+0x76 ([kernel.kallsyms])
Fixes: 85d33df357b6 ("bpf: Introduce BPF_MAP_TYPE_STRUCT_OPS")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241112145849.3436772-4-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 821a3fa32bbe3bc0fa23b3189325d3720a49a24c ]
Only function pointers in a struct_ops structure can be linked to bpf
progs, so set the links count to the function pointers count, instead
of the total members count in the structure.
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20241112145849.3436772-3-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 7c8ce4ffb684 ("bpf: Add kernel symbol for struct_ops trampoline")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f505005bc7426f4309880da94cfbfc37efa225bd ]
As suggested by Andrii make uprobe multi bpf programs to always return 0,
so they can't force uprobe removal.
Keeping the int return type for uprobe_prog_run, because it will be used
in following session changes.
Fixes: 89ae89f53d20 ("bpf: Add multi uprobe link")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-3-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 17c4b65a24938c6dd79496cce5df15f70d9c253c ]
The kprobe session program can return only 0 or 1,
instruct verifier to check for that.
Fixes: 535a3692ba72 ("bpf: Add support for kprobe session attach")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-2-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cb4158ce8ec8a5bb528cc1693356a5eb8058094d ]
Arguments to a raw tracepoint are tagged as trusted, which carries the
semantics that the pointer will be non-NULL. However, in certain cases,
a raw tracepoint argument may end up being NULL. More context about this
issue is available in [0].
Thus, there is a discrepancy between the reality, that raw_tp arguments
can actually be NULL, and the verifier's knowledge, that they are never
NULL, causing explicit NULL checks to be deleted, and accesses to such
pointers potentially crashing the kernel.
To fix this, mark raw_tp arguments as PTR_MAYBE_NULL, and then special
case the dereference and pointer arithmetic to permit it, and allow
passing them into helpers/kfuncs; these exceptions are made for raw_tp
programs only. Ensure that we don't do this when ref_obj_id > 0, as in
that case this is an acquired object and doesn't need such adjustment.
The reason we do mask_raw_tp_trusted_reg logic is because other will
recheck in places whether the register is a trusted_reg, and then
consider our register as untrusted when detecting the presence of the
PTR_MAYBE_NULL flag.
To allow safe dereference, we enable PROBE_MEM marking when we see loads
into trusted pointers with PTR_MAYBE_NULL.
While trusted raw_tp arguments can also be passed into helpers or kfuncs
where such broken assumption may cause issues, a future patch set will
tackle their case separately, as PTR_TO_BTF_ID (without PTR_TRUSTED) can
already be passed into helpers and causes similar problems. Thus, they
are left alone for now.
It is possible that these checks also permit passing non-raw_tp args
that are trusted PTR_TO_BTF_ID with null marking. In such a case,
allowing dereference when pointer is NULL expands allowed behavior, so
won't regress existing programs, and the case of passing these into
helpers is the same as above and will be dealt with later.
Also update the failure case in tp_btf_nullable selftest to capture the
new behavior, as the verifier will no longer cause an error when
directly dereference a raw tracepoint argument marked as __nullable.
[0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Fixes: 3f00c5239344 ("bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241104171959.2938862-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
