| Age | Commit message (Collapse) | Author |
|---|
|
commit cec6937dd1aae1b38d147bd190cb895d06cf96d0 upstream.
The TWA_NMI_CURRENT handling very much depends on IRQ_WORK, but that
isn't universally enabled everywhere.
Maybe the IRQ_WORK infrastructure should just be unconditional - x86
ends up indirectly enabling it through unconditionally enabling
PERF_EVENTS, for example. But it also gets enabled by having SMP
support, or even if you just have PRINTK enabled.
But in the meantime TWA_NMI_CURRENT causes tons of build failures on
various odd minimal configs. Which did show up in linux-next, but
despite that nobody bothered to fix it or even inform me until -rc1 was
out.
Fixes: 466e4d801cd4 ("task_work: Add TWA_NMI_CURRENT as an additional notify mode")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: kernelci.org bot <bot@kernelci.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0add699ad068d26e5b1da9ff28b15461fc4005df upstream.
Fix to initialize 'val' local variable with zero.
Dan reported that Smatch static code checker reports an error that a local
'val' variable needs to be initialized. Actually, the 'val' is expected to
be initialized by FETCH_OP_ARG in the same loop, but it is not obvious. So
initialize it with zero.
Link: https://lore.kernel.org/all/171092223833.237219.17304490075697026697.stgit@devnote2/
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/b010488e-68aa-407c-add0-3e059254aaa0@moroto.mountain/
Fixes: 25f00e40ce79 ("tracing/probes: Support $argN in return probe (kprobe and fprobe)")
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0ee288e69d033850bc87abe0f9cc3ada24763d7f ]
Peter reported that perf_event_detach_bpf_prog might skip to release
the bpf program for -ENOENT error from bpf_prog_array_copy.
This can't happen because bpf program is stored in perf event and is
detached and released only when perf event is freed.
Let's drop the -ENOENT check and make sure the bpf program is released
in any case.
Fixes: 170a7e3ea070 ("bpf: bpf_prog_array_copy() should return -ENOENT if exclude_prog not found")
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241023200352.3488610-1-jolsa@kernel.org
Closes: https://lore.kernel.org/lkml/20241022111638.GC16066@noisy.programming.kicks-ass.net/
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6e62807c7fbb3c758d233018caf94dfea9c65dbd ]
If get_clock_desc() succeeds, it calls fget() for the clockid's fd,
and get the clk->rwsem read lock, so the error path should release
the lock to make the lock balance and fput the clockid's fd to make
the refcount balance and release the fd related resource.
However the below commit left the error path locked behind resulting in
unbalanced locking. Check timespec64_valid_strict() before
get_clock_desc() to fix it, because the "ts" is not changed
after that.
Fixes: d8794ac20a29 ("posix-clock: Fix missing timespec64 check in pc_clock_settime()")
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
[pabeni@redhat.com: fixed commit message typo]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8ea607330a39184f51737c6ae706db7fdca7628e ]
Lonial reported an issue in the BPF verifier where check_mem_size_reg()
has the following code:
if (!tnum_is_const(reg->var_off))
/* For unprivileged variable accesses, disable raw
* mode so that the program is required to
* initialize all the memory that the helper could
* just partially fill up.
*/
meta = NULL;
This means that writes are not checked when the register containing the
size of the passed buffer has not a fixed size. Through this bug, a BPF
program can write to a map which is marked as read-only, for example,
.rodata global maps.
The problem is that MEM_UNINIT's initial meaning that "the passed buffer
to the BPF helper does not need to be initialized" which was added back
in commit 435faee1aae9 ("bpf, verifier: add ARG_PTR_TO_RAW_STACK type")
got overloaded over time with "the passed buffer is being written to".
The problem however is that checks such as the above which were added later
via 06c1c049721a ("bpf: allow helpers access to variable memory") set meta
to NULL in order force the user to always initialize the passed buffer to
the helper. Due to the current double meaning of MEM_UNINIT, this bypasses
verifier write checks to the memory (not boundary checks though) and only
assumes the latter memory is read instead.
Fix this by reverting MEM_UNINIT back to its original meaning, and having
MEM_WRITE as an annotation to BPF helpers in order to then trigger the
BPF verifier checks for writing to memory.
Some notes: check_arg_pair_ok() ensures that for ARG_CONST_SIZE{,_OR_ZERO}
we can access fn->arg_type[arg - 1] since it must contain a preceding
ARG_PTR_TO_MEM. For check_mem_reg() the meta argument can be removed
altogether since we do check both BPF_READ and BPF_WRITE. Same for the
equivalent check_kfunc_mem_size_reg().
Fixes: 7b3552d3f9f6 ("bpf: Reject writes for PTR_TO_MAP_KEY in check_helper_mem_access")
Fixes: 97e6d7dab1ca ("bpf: Check PTR_TO_MEM | MEM_RDONLY in check_helper_mem_access")
Fixes: 15baa55ff5b0 ("bpf/verifier: allow all functions to read user provided context")
Reported-by: Lonial Con <kongln9170@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241021152809.33343-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6fad274f06f038c29660aa53fbad14241c9fd976 ]
Add a MEM_WRITE attribute for BPF helper functions which can be used in
bpf_func_proto to annotate an argument type in order to let the verifier
know that the helper writes into the memory passed as an argument. In
the past MEM_UNINIT has been (ab)used for this function, but the latter
merely tells the verifier that the passed memory can be uninitialized.
There have been bugs with overloading the latter but aside from that
there are also cases where the passed memory is read + written which
currently cannot be expressed, see also 4b3786a6c539 ("bpf: Zero former
ARG_PTR_TO_{LONG,INT} args in case of error").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241021152809.33343-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 8ea607330a39 ("bpf: Fix overloading of MEM_UNINIT's meaning")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8a021e7fa10576eeb3938328f39bbf98fe7d4715 ]
This patch simplifies the verification of size arguments associated to
pointer arguments to helpers and kfuncs. Many helpers take a pointer
argument followed by the size of the memory access performed to be
performed through that pointer. Before this patch, the handling of the
size argument in check_mem_size_reg() was confusing and wasteful: if the
size register's lower bound was 0, then the verification was done twice:
once considering the size of the access to be the lower-bound of the
respective argument, and once considering the upper bound (even if the
two are the same). The upper bound checking is a super-set of the
lower-bound checking(*), except: the only point of the lower-bound check
is to handle the case where zero-sized-accesses are explicitly not
allowed and the lower-bound is zero. This static condition is now
checked explicitly, replacing a much more complex, expensive and
confusing verification call to check_helper_mem_access().
Error messages change in this patch. Before, messages about illegal
zero-size accesses depended on the type of the pointer and on other
conditions, and sometimes the message was plain wrong: in some tests
that changed you'll see that the old message was something like "R1 min
value is outside of the allowed memory range", where R1 is the pointer
register; the error was wrongly claiming that the pointer was bad
instead of the size being bad. Other times the information that the size
came for a register with a possible range of values was wrong, and the
error presented the size as a fixed zero. Now the errors refer to the
right register. However, the old error messages did contain useful
information about the pointer register which is now lost; recovering
this information was deemed not important enough.
(*) Besides standing to reason that the checks for a bigger size access
are a super-set of the checks for a smaller size access, I have also
mechanically verified this by reading the code for all types of
pointers. I could convince myself that it's true for all but
PTR_TO_BTF_ID (check_ptr_to_btf_access). There, simply looking
line-by-line does not immediately prove what we want. If anyone has any
qualms, let me know.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231221232225.568730-2-andreimatei1@gmail.com
Stable-dep-of: 8ea607330a39 ("bpf: Fix overloading of MEM_UNINIT's meaning")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0b6e2e22cb23105fcb171ab92f0f7516c69c8471 ]
strlen() returns a string length excluding the null byte. If the string
length equals to the maximum buffer length, the buffer will have no
space for the NULL terminating character.
This commit checks this condition and returns failure for it.
Link: https://lore.kernel.org/all/20241007144724.920954-1-leo.yan@arm.com/
Fixes: dec65d79fd26 ("tracing/probe: Check event name length correctly")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 73f35080477e893aa6f4c8d388352b871b288fbc ]
When creating a trace_probe we would set nr_args prior to truncating the
arguments to MAX_TRACE_ARGS. However, we would only initialize arguments
up to the limit.
This caused invalid memory access when attempting to set up probes with
more than 128 fetchargs.
BUG: kernel NULL pointer dereference, address: 0000000000000020
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 UID: 0 PID: 1769 Comm: cat Not tainted 6.11.0-rc7+ #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014
RIP: 0010:__set_print_fmt+0x134/0x330
Resolve the issue by applying the MAX_TRACE_ARGS limit earlier. Return
an error when there are too many arguments instead of silently
truncating.
Link: https://lore.kernel.org/all/20240930202656.292869-1-mikel@mikelr.com/
Fixes: 035ba76014c0 ("tracing/probes: cleanup: Set trace_probe::nr_args at trace_probe_init")
Signed-off-by: Mikel Rychliski <mikel@mikelr.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 373b9338c9722a368925d83bc622c596896b328e ]
Uprobe needs to fetch args into a percpu buffer, and then copy to ring
buffer to avoid non-atomic context problem.
Sometimes user-space strings, arrays can be very large, but the size of
percpu buffer is only page size. And store_trace_args() won't check
whether these data exceeds a single page or not, caused out-of-bounds
memory access.
It could be reproduced by following steps:
1. build kernel with CONFIG_KASAN enabled
2. save follow program as test.c
```
\#include <stdio.h>
\#include <stdlib.h>
\#include <string.h>
// If string length large than MAX_STRING_SIZE, the fetch_store_strlen()
// will return 0, cause __get_data_size() return shorter size, and
// store_trace_args() will not trigger out-of-bounds access.
// So make string length less than 4096.
\#define STRLEN 4093
void generate_string(char *str, int n)
{
int i;
for (i = 0; i < n; ++i)
{
char c = i % 26 + 'a';
str[i] = c;
}
str[n-1] = '\0';
}
void print_string(char *str)
{
printf("%s\n", str);
}
int main()
{
char tmp[STRLEN];
generate_string(tmp, STRLEN);
print_string(tmp);
return 0;
}
```
3. compile program
`gcc -o test test.c`
4. get the offset of `print_string()`
```
objdump -t test | grep -w print_string
0000000000401199 g F .text 000000000000001b print_string
```
5. configure uprobe with offset 0x1199
```
off=0x1199
cd /sys/kernel/debug/tracing/
echo "p /root/test:${off} arg1=+0(%di):ustring arg2=\$comm arg3=+0(%di):ustring"
> uprobe_events
echo 1 > events/uprobes/enable
echo 1 > tracing_on
```
6. run `test`, and kasan will report error.
==================================================================
BUG: KASAN: use-after-free in strncpy_from_user+0x1d6/0x1f0
Write of size 8 at addr ffff88812311c004 by task test/499CPU: 0 UID: 0 PID: 499 Comm: test Not tainted 6.12.0-rc3+ #18
Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x70
print_address_description.constprop.0+0x27/0x310
kasan_report+0x10f/0x120
? strncpy_from_user+0x1d6/0x1f0
strncpy_from_user+0x1d6/0x1f0
? rmqueue.constprop.0+0x70d/0x2ad0
process_fetch_insn+0xb26/0x1470
? __pfx_process_fetch_insn+0x10/0x10
? _raw_spin_lock+0x85/0xe0
? __pfx__raw_spin_lock+0x10/0x10
? __pte_offset_map+0x1f/0x2d0
? unwind_next_frame+0xc5f/0x1f80
? arch_stack_walk+0x68/0xf0
? is_bpf_text_address+0x23/0x30
? kernel_text_address.part.0+0xbb/0xd0
? __kernel_text_address+0x66/0xb0
? unwind_get_return_address+0x5e/0xa0
? __pfx_stack_trace_consume_entry+0x10/0x10
? arch_stack_walk+0xa2/0xf0
? _raw_spin_lock_irqsave+0x8b/0xf0
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? depot_alloc_stack+0x4c/0x1f0
? _raw_spin_unlock_irqrestore+0xe/0x30
? stack_depot_save_flags+0x35d/0x4f0
? kasan_save_stack+0x34/0x50
? kasan_save_stack+0x24/0x50
? mutex_lock+0x91/0xe0
? __pfx_mutex_lock+0x10/0x10
prepare_uprobe_buffer.part.0+0x2cd/0x500
uprobe_dispatcher+0x2c3/0x6a0
? __pfx_uprobe_dispatcher+0x10/0x10
? __kasan_slab_alloc+0x4d/0x90
handler_chain+0xdd/0x3e0
handle_swbp+0x26e/0x3d0
? __pfx_handle_swbp+0x10/0x10
? uprobe_pre_sstep_notifier+0x151/0x1b0
irqentry_exit_to_user_mode+0xe2/0x1b0
asm_exc_int3+0x39/0x40
RIP: 0033:0x401199
Code: 01 c2 0f b6 45 fb 88 02 83 45 fc 01 8b 45 fc 3b 45 e4 7c b7 8b 45 e4 48 98 48 8d 50 ff 48 8b 45 e8 48 01 d0 ce
RSP: 002b:00007ffdf00576a8 EFLAGS: 00000206
RAX: 00007ffdf00576b0 RBX: 0000000000000000 RCX: 0000000000000ff2
RDX: 0000000000000ffc RSI: 0000000000000ffd RDI: 00007ffdf00576b0
RBP: 00007ffdf00586b0 R08: 00007feb2f9c0d20 R09: 00007feb2f9c0d20
R10: 0000000000000001 R11: 0000000000000202 R12: 0000000000401040
R13: 00007ffdf0058780 R14: 0000000000000000 R15: 0000000000000000
</TASK>
This commit enforces the buffer's maxlen less than a page-size to avoid
store_trace_args() out-of-memory access.
Link: https://lore.kernel.org/all/20241015060148.1108331-1-mqaio@linux.alibaba.com/
Fixes: dcad1a204f72 ("tracing/uprobes: Fetch args before reserving a ring buffer")
Signed-off-by: Qiao Ma <mqaio@linux.alibaba.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 699646734ab51bf5b1cd4a7a30c20074f6e74f6e ]
Recent changes made uprobe_cpu_buffer preparation lazy, and moved it
deeper into __uprobe_trace_func(). This is problematic because
__uprobe_trace_func() is called inside rcu_read_lock()/rcu_read_unlock()
block, which then calls prepare_uprobe_buffer() -> uprobe_buffer_get() ->
mutex_lock(&ucb->mutex), leading to a splat about using mutex under
non-sleepable RCU:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 98231, name: stress-ng-sigq
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
...
Call Trace:
<TASK>
dump_stack_lvl+0x3d/0xe0
__might_resched+0x24c/0x270
? prepare_uprobe_buffer+0xd5/0x1d0
__mutex_lock+0x41/0x820
? ___perf_sw_event+0x206/0x290
? __perf_event_task_sched_in+0x54/0x660
? __perf_event_task_sched_in+0x54/0x660
prepare_uprobe_buffer+0xd5/0x1d0
__uprobe_trace_func+0x4a/0x140
uprobe_dispatcher+0x135/0x280
? uprobe_dispatcher+0x94/0x280
uprobe_notify_resume+0x650/0xec0
? atomic_notifier_call_chain+0x21/0x110
? atomic_notifier_call_chain+0xf8/0x110
irqentry_exit_to_user_mode+0xe2/0x1e0
asm_exc_int3+0x35/0x40
RIP: 0033:0x7f7e1d4da390
Code: 33 04 00 0f 1f 80 00 00 00 00 f3 0f 1e fa b9 01 00 00 00 e9 b2 fc ff ff 66 90 f3 0f 1e fa 31 c9 e9 a5 fc ff ff 0f 1f 44 00 00 <cc> 0f 1e fa b8 27 00 00 00 0f 05 c3 0f 1f 40 00 f3 0f 1e fa b8 6e
RSP: 002b:00007ffd2abc3608 EFLAGS: 00000246
RAX: 0000000000000000 RBX: 0000000076d325f1 RCX: 0000000000000000
RDX: 0000000076d325f1 RSI: 000000000000000a RDI: 00007ffd2abc3690
RBP: 000000000000000a R08: 00017fb700000000 R09: 00017fb700000000
R10: 00017fb700000000 R11: 0000000000000246 R12: 0000000000017ff2
R13: 00007ffd2abc3610 R14: 0000000000000000 R15: 00007ffd2abc3780
</TASK>
Luckily, it's easy to fix by moving prepare_uprobe_buffer() to be called
slightly earlier: into uprobe_trace_func() and uretprobe_trace_func(), outside
of RCU locked section. This still keeps this buffer preparation lazy and helps
avoid the overhead when it's not needed. E.g., if there is only BPF uprobe
handler installed on a given uprobe, buffer won't be initialized.
Note, the other user of prepare_uprobe_buffer(), __uprobe_perf_func(), is not
affected, as it doesn't prepare buffer under RCU read lock.
Link: https://lore.kernel.org/all/20240521053017.3708530-1-andrii@kernel.org/
Fixes: 1b8f85defbc8 ("uprobes: prepare uprobe args buffer lazily")
Reported-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Stable-dep-of: 373b9338c972 ("uprobe: avoid out-of-bounds memory access of fetching args")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1b8f85defbc82e2eb8f27c5f6060ea507ad4d5a3 ]
uprobe_cpu_buffer and corresponding logic to store uprobe args into it
are used for uprobes/uretprobes that are created through tracefs or
perf events.
BPF is yet another user of uprobe/uretprobe infrastructure, but doesn't
need uprobe_cpu_buffer and associated data. For BPF-only use cases this
buffer handling and preparation is a pure overhead. At the same time,
BPF-only uprobe/uretprobe usage is very common in practice. Also, for
a lot of cases applications are very senstivie to performance overheads,
as they might be tracing a very high frequency functions like
malloc()/free(), so every bit of performance improvement matters.
All that is to say that this uprobe_cpu_buffer preparation is an
unnecessary overhead that each BPF user of uprobes/uretprobe has to pay.
This patch is changing this by making uprobe_cpu_buffer preparation
optional. It will happen only if either tracefs-based or perf event-based
uprobe/uretprobe consumer is registered for given uprobe/uretprobe. For
BPF-only use cases this step will be skipped.
We used uprobe/uretprobe benchmark which is part of BPF selftests (see [0])
to estimate the improvements. We have 3 uprobe and 3 uretprobe
scenarios, which vary an instruction that is replaced by uprobe: nop
(fastest uprobe case), `push rbp` (typical case), and non-simulated
`ret` instruction (slowest case). Benchmark thread is constantly calling
user space function in a tight loop. User space function has attached
BPF uprobe or uretprobe program doing nothing but atomic counter
increments to count number of triggering calls. Benchmark emits
throughput in millions of executions per second.
BEFORE these changes
====================
uprobe-nop : 2.657 ± 0.024M/s
uprobe-push : 2.499 ± 0.018M/s
uprobe-ret : 1.100 ± 0.006M/s
uretprobe-nop : 1.356 ± 0.004M/s
uretprobe-push : 1.317 ± 0.019M/s
uretprobe-ret : 0.785 ± 0.007M/s
AFTER these changes
===================
uprobe-nop : 2.732 ± 0.022M/s (+2.8%)
uprobe-push : 2.621 ± 0.016M/s (+4.9%)
uprobe-ret : 1.105 ± 0.007M/s (+0.5%)
uretprobe-nop : 1.396 ± 0.007M/s (+2.9%)
uretprobe-push : 1.347 ± 0.008M/s (+2.3%)
uretprobe-ret : 0.800 ± 0.006M/s (+1.9)
So the improvements on this particular machine seems to be between 2% and 5%.
[0] https://github.com/torvalds/linux/blob/master/tools/testing/selftests/bpf/benchs/bench_trigger.c
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/all/20240318181728.2795838-3-andrii@kernel.org/
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Stable-dep-of: 373b9338c972 ("uprobe: avoid out-of-bounds memory access of fetching args")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3eaea21b4d27cff0017c20549aeb53034c58fc23 ]
Move the logic of fetching temporary per-CPU uprobe buffer and storing
uprobes args into it to a new helper function. Store data size as part
of this buffer, simplifying interfaces a bit, as now we only pass single
uprobe_cpu_buffer reference around, instead of pointer + dsize.
This logic was duplicated across uprobe_dispatcher and uretprobe_dispatcher,
and now will be centralized. All this is also in preparation to make
this uprobe_cpu_buffer handling logic optional in the next patch.
Link: https://lore.kernel.org/all/20240318181728.2795838-2-andrii@kernel.org/
[Masami: update for v6.9-rc3 kernel]
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Stable-dep-of: 373b9338c972 ("uprobe: avoid out-of-bounds memory access of fetching args")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 25f00e40ce7953db197af3a59233711d154c9d80 ]
Support accessing $argN in the return probe events. This will help users to
record entry data in function return (exit) event for simplfing the function
entry/exit information in one event, and record the result values (e.g.
allocated object/initialized object) at function exit.
For example, if we have a function `int init_foo(struct foo *obj, int param)`
sometimes we want to check how `obj` is initialized. In such case, we can
define a new return event like below;
# echo 'r init_foo retval=$retval param=$arg2 field1=+0($arg1)' >> kprobe_events
Thus it records the function parameter `param` and its result `obj->field1`
(the dereference will be done in the function exit timing) value at once.
This also support fprobe, BTF args and'$arg*'. So if CONFIG_DEBUG_INFO_BTF
is enabled, we can trace both function parameters and the return value
by following command.
# echo 'f target_function%return $arg* $retval' >> dynamic_events
Link: https://lore.kernel.org/all/170952365552.229804.224112990211602895.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Stable-dep-of: 373b9338c972 ("uprobe: avoid out-of-bounds memory access of fetching args")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 035ba76014c096316fa809a46ce0a1b9af1cde0d ]
Instead of incrementing the trace_probe::nr_args, init it at
trace_probe_init(). Without this change, there is no way to get the number
of trace_probe arguments while parsing it.
This is a cleanup, so the behavior is not changed.
Link: https://lore.kernel.org/all/170952363585.229804.13060759900346411951.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Stable-dep-of: 373b9338c972 ("uprobe: avoid out-of-bounds memory access of fetching args")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7e37b6bc3cc096e24709908076807bb9c3cf0d38 ]
Despite the fprobe event, "Kretprobe" was commented. So fix it.
Link: https://lore.kernel.org/all/170952361630.229804.10832200172327797860.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: 373b9338c972 ("uprobe: avoid out-of-bounds memory access of fetching args")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9495a5b731fcaf580448a3438d63601c88367661 ]
In userspace, you can add a tid filter by setting
the "task.tid" field for "bpf_iter_link_info".
However, `get_pid_task` when called for the
`BPF_TASK_ITER_TID` type should have been using
`PIDTYPE_PID` (tid) instead of `PIDTYPE_TGID` (pid).
Fixes: f0d74c4da1f0 ("bpf: Parameterize task iterators.")
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241016210048.1213935-1-linux@jordanrome.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ae67b9fb8c4e981e929a665dcaa070f4b05ebdb4 ]
coerce_reg_to_size_sx() updates the register state after a sign-extension
operation. However, there's a bug in the assignment order of the unsigned
min/max values, leading to incorrect truncation:
0: (85) call bpf_get_prandom_u32#7 ; R0_w=scalar()
1: (57) r0 &= 1 ; R0_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1,var_off=(0x0; 0x1))
2: (07) r0 += 254 ; R0_w=scalar(smin=umin=smin32=umin32=254,smax=umax=smax32=umax32=255,var_off=(0xfe; 0x1))
3: (bf) r0 = (s8)r0 ; R0_w=scalar(smin=smin32=-2,smax=smax32=-1,umin=umin32=0xfffffffe,umax=0xffffffff,var_off=(0xfffffffffffffffe; 0x1))
In the current implementation, the unsigned 32-bit min/max values
(u32_min_value and u32_max_value) are assigned directly from the 64-bit
signed min/max values (s64_min and s64_max):
reg->umin_value = reg->u32_min_value = s64_min;
reg->umax_value = reg->u32_max_value = s64_max;
Due to the chain assigmnent, this is equivalent to:
reg->u32_min_value = s64_min; // Unintended truncation
reg->umin_value = reg->u32_min_value;
reg->u32_max_value = s64_max; // Unintended truncation
reg->umax_value = reg->u32_max_value;
Fixes: 1f9a1ea821ff ("bpf: Support new sign-extension load insns")
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Reported-by: Zac Ecob <zacecob@protonmail.com>
Signed-off-by: Dimitar Kanaliev <dimitar.kanaliev@siteground.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20241014121155.92887-2-dimitar.kanaliev@siteground.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 73ab05aa46b02d96509cb029a8d04fca7bbde8c7 ]
With KASAN and PREEMPT_RT enabled, calling task_work_add() in
task_tick_mm_cid() may cause the following splat.
[ 63.696416] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 63.696416] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 610, name: modprobe
[ 63.696416] preempt_count: 10001, expected: 0
[ 63.696416] RCU nest depth: 1, expected: 1
This problem is caused by the following call trace.
sched_tick() [ acquire rq->__lock ]
-> task_tick_mm_cid()
-> task_work_add()
-> __kasan_record_aux_stack()
-> kasan_save_stack()
-> stack_depot_save_flags()
-> alloc_pages_mpol_noprof()
-> __alloc_pages_noprof()
-> get_page_from_freelist()
-> rmqueue()
-> rmqueue_pcplist()
-> __rmqueue_pcplist()
-> rmqueue_bulk()
-> rt_spin_lock()
The rq lock is a raw_spinlock_t. We can't sleep while holding
it. IOW, we can't call alloc_pages() in stack_depot_save_flags().
The task_tick_mm_cid() function with its task_work_add() call was
introduced by commit 223baf9d17f2 ("sched: Fix performance regression
introduced by mm_cid") in v6.4 kernel.
Fortunately, there is a kasan_record_aux_stack_noalloc() variant that
calls stack_depot_save_flags() while not allowing it to allocate
new pages. To allow task_tick_mm_cid() to use task_work without
page allocation, a new TWAF_NO_ALLOC flag is added to enable calling
kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack()
if set. The task_tick_mm_cid() function is modified to add this new flag.
The possible downside is the missing stack trace in a KASAN report due
to new page allocation required when task_work_add_noallloc() is called
which should be rare.
Fixes: 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241010014432.194742-1-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 466e4d801cd438a1ab2c8a2cce1bef6b65c31bbb ]
Adding task_work from NMI context requires the following:
- The kasan_record_aux_stack() is not NMU safe and must be avoided.
- Using TWA_RESUME is NMI safe. If the NMI occurs while the CPU is in
userland then it will continue in userland and not invoke the `work'
callback.
Add TWA_NMI_CURRENT as an additional notify mode. In this mode skip
kasan and use irq_work in hardirq-mode to for needed interrupt. Set
TIF_NOTIFY_RESUME within the irq_work callback due to k[ac]san
instrumentation in test_and_set_bit() which does not look NMI safe in
case of a report.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240704170424.1466941-3-bigeasy@linutronix.de
Stable-dep-of: 73ab05aa46b0 ("sched/core: Disable page allocation in task_tick_mm_cid()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6cb86a0fdece87e126323ec1bb19deb16a52aedf ]
The verifier contains a cache for looking up module BTF objects when
calling kfuncs defined in modules. This cache uses a 'struct
bpf_kfunc_btf_tab', which contains a sorted list of BTF objects that
were already seen in the current verifier run, and the BTF objects are
looked up by the offset stored in the relocated call instruction using
bsearch().
The first time a given offset is seen, the module BTF is loaded from the
file descriptor passed in by libbpf, and stored into the cache. However,
there's a bug in the code storing the new entry: it stores a pointer to
the new cache entry, then calls sort() to keep the cache sorted for the
next lookup using bsearch(), and then returns the entry that was just
stored through the stored pointer. However, because sort() modifies the
list of entries in place *by value*, the stored pointer may no longer
point to the right entry, in which case the wrong BTF object will be
returned.
The end result of this is an intermittent bug where, if a BPF program
calls two functions with the same signature in two different modules,
the function from the wrong module may sometimes end up being called.
Whether this happens depends on the order of the calls in the BPF
program (as that affects whether sort() reorders the array of BTF
objects), making it especially hard to track down. Simon, credited as
reporter below, spent significant effort analysing and creating a
reproducer for this issue. The reproducer is added as a selftest in a
subsequent patch.
The fix is straight forward: simply don't use the stored pointer after
calling sort(). Since we already have an on-stack pointer to the BTF
object itself at the point where the function return, just use that, and
populate it from the cache entry in the branch where the lookup
succeeds.
Fixes: 2357672c54c3 ("bpf: Introduce BPF support for kernel module function calls")
Reported-by: Simon Sundberg <simon.sundberg@kau.se>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20241010-fix-kfunc-btf-caching-for-modules-v2-1-745af6c1af98@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4deecdd29cf29844c7bd164d72dc38d2e672f64e ]
Previously when retrieving `bpf_link_info.perf_event` for
kprobe/uprobe/tracepoint, the `name_len` field was not populated by the
kernel, leaving it to reflect the value initially set by the user. This
behavior was inconsistent with how other input/output string buffer
fields function (e.g. `raw_tracepoint.tp_name_len`).
This patch fills `name_len` with the actual size of the string name.
Fixes: 1b715e1b0ec5 ("bpf: Support ->fill_link_info for perf_event")
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20241008164312.46269-1-wudevelops@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d5c16492c66fbfca85f36e42363d32212df5927b ]
At the moment we don't store cookie for perf_event probes,
while we do that for the rest of the probes.
Adding cookie fields to struct bpf_link_info perf event
probe records:
perf_event.uprobe
perf_event.kprobe
perf_event.tracepoint
perf_event.perf_event
And the code to store that in bpf_link_info struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20240119110505.400573-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 4deecdd29cf2 ("bpf: fix unpopulated name_len field in perf_event link info")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3acf8ace68230e9558cf916847f1cc9f208abdf1 ]
Add missed value to kprobe attached through perf link info to
hold the stats of missed kprobe handler execution.
The kprobe's missed counter gets incremented when kprobe handler
is not executed due to another kprobe running on the same cpu.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-4-jolsa@kernel.org
Stable-dep-of: 4deecdd29cf2 ("bpf: fix unpopulated name_len field in perf_event link info")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45126b155e3b5201179cdc038504bf93a8ccd921 ]
We need to free specs properly.
Fixes: 3d2786d65aaa ("bpf: correctly handle malformed BPF_CORE_TYPE_ID_LOCAL relos")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20241007160958.607434-1-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ca9984c5f0ab3690d98b13937b2485a978c8dd73 ]
rxq contains a pointer to the device from where
the redirect happened. Currently, the BPF program
that was executed after a redirect via BPF_MAP_TYPE_DEVMAP*
does not have it set.
This is particularly bad since accessing ingress_ifindex, e.g.
SEC("xdp")
int prog(struct xdp_md *pkt)
{
return bpf_redirect_map(&dev_redirect_map, 0, 0);
}
SEC("xdp/devmap")
int prog_after_redirect(struct xdp_md *pkt)
{
bpf_printk("ifindex %i", pkt->ingress_ifindex);
return XDP_PASS;
}
depends on access to rxq, so a NULL pointer gets dereferenced:
<1>[ 574.475170] BUG: kernel NULL pointer dereference, address: 0000000000000000
<1>[ 574.475188] #PF: supervisor read access in kernel mode
<1>[ 574.475194] #PF: error_code(0x0000) - not-present page
<6>[ 574.475199] PGD 0 P4D 0
<4>[ 574.475207] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
<4>[ 574.475217] CPU: 4 UID: 0 PID: 217 Comm: kworker/4:1 Not tainted 6.11.0-rc5-reduced-00859-g780801200300 #23
<4>[ 574.475226] Hardware name: Intel(R) Client Systems NUC13ANHi7/NUC13ANBi7, BIOS ANRPL357.0026.2023.0314.1458 03/14/2023
<4>[ 574.475231] Workqueue: mld mld_ifc_work
<4>[ 574.475247] RIP: 0010:bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c
<4>[ 574.475257] Code: cc cc cc cc cc cc cc 80 00 00 00 cc cc cc cc cc cc cc cc f3 0f 1e fa 0f 1f 44 00 00 66 90 55 48 89 e5 f3 0f 1e fa 48 8b 57 20 <48> 8b 52 00 8b 92 e0 00 00 00 48 bf f8 a6 d5 c4 5d a0 ff ff be 0b
<4>[ 574.475263] RSP: 0018:ffffa62440280c98 EFLAGS: 00010206
<4>[ 574.475269] RAX: ffffa62440280cd8 RBX: 0000000000000001 RCX: 0000000000000000
<4>[ 574.475274] RDX: 0000000000000000 RSI: ffffa62440549048 RDI: ffffa62440280ce0
<4>[ 574.475278] RBP: ffffa62440280c98 R08: 0000000000000002 R09: 0000000000000001
<4>[ 574.475281] R10: ffffa05dc8b98000 R11: ffffa05f577fca40 R12: ffffa05dcab24000
<4>[ 574.475285] R13: ffffa62440280ce0 R14: ffffa62440549048 R15: ffffa62440549000
<4>[ 574.475289] FS: 0000000000000000(0000) GS:ffffa05f4f700000(0000) knlGS:0000000000000000
<4>[ 574.475294] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 574.475298] CR2: 0000000000000000 CR3: 000000025522e000 CR4: 0000000000f50ef0
<4>[ 574.475303] PKRU: 55555554
<4>[ 574.475306] Call Trace:
<4>[ 574.475313] <IRQ>
<4>[ 574.475318] ? __die+0x23/0x70
<4>[ 574.475329] ? page_fault_oops+0x180/0x4c0
<4>[ 574.475339] ? skb_pp_cow_data+0x34c/0x490
<4>[ 574.475346] ? kmem_cache_free+0x257/0x280
<4>[ 574.475357] ? exc_page_fault+0x67/0x150
<4>[ 574.475368] ? asm_exc_page_fault+0x26/0x30
<4>[ 574.475381] ? bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c
<4>[ 574.475386] bq_xmit_all+0x158/0x420
<4>[ 574.475397] __dev_flush+0x30/0x90
<4>[ 574.475407] veth_poll+0x216/0x250 [veth]
<4>[ 574.475421] __napi_poll+0x28/0x1c0
<4>[ 574.475430] net_rx_action+0x32d/0x3a0
<4>[ 574.475441] handle_softirqs+0xcb/0x2c0
<4>[ 574.475451] do_softirq+0x40/0x60
<4>[ 574.475458] </IRQ>
<4>[ 574.475461] <TASK>
<4>[ 574.475464] __local_bh_enable_ip+0x66/0x70
<4>[ 574.475471] __dev_queue_xmit+0x268/0xe40
<4>[ 574.475480] ? selinux_ip_postroute+0x213/0x420
<4>[ 574.475491] ? alloc_skb_with_frags+0x4a/0x1d0
<4>[ 574.475502] ip6_finish_output2+0x2be/0x640
<4>[ 574.475512] ? nf_hook_slow+0x42/0xf0
<4>[ 574.475521] ip6_finish_output+0x194/0x300
<4>[ 574.475529] ? __pfx_ip6_finish_output+0x10/0x10
<4>[ 574.475538] mld_sendpack+0x17c/0x240
<4>[ 574.475548] mld_ifc_work+0x192/0x410
<4>[ 574.475557] process_one_work+0x15d/0x380
<4>[ 574.475566] worker_thread+0x29d/0x3a0
<4>[ 574.475573] ? __pfx_worker_thread+0x10/0x10
<4>[ 574.475580] ? __pfx_worker_thread+0x10/0x10
<4>[ 574.475587] kthread+0xcd/0x100
<4>[ 574.475597] ? __pfx_kthread+0x10/0x10
<4>[ 574.475606] ret_from_fork+0x31/0x50
<4>[ 574.475615] ? __pfx_kthread+0x10/0x10
<4>[ 574.475623] ret_from_fork_asm+0x1a/0x30
<4>[ 574.475635] </TASK>
<4>[ 574.475637] Modules linked in: veth br_netfilter bridge stp llc iwlmvm x86_pkg_temp_thermal iwlwifi efivarfs nvme nvme_core
<4>[ 574.475662] CR2: 0000000000000000
<4>[ 574.475668] ---[ end trace 0000000000000000 ]---
Therefore, provide it to the program by setting rxq properly.
Fixes: cb261b594b41 ("bpf: Run devmap xdp_prog on flush instead of bulk enqueue")
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240911-devel-koalo-fix-ingress-ifindex-v4-1-5c643ae10258@linutronix.de
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d8794ac20a299b647ba9958f6d657051fc51a540 upstream.
As Andrew pointed out, it will make sense that the PTP core
checked timespec64 struct's tv_sec and tv_nsec range before calling
ptp->info->settime64().
As the man manual of clock_settime() said, if tp.tv_sec is negative or
tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL,
which include dynamic clocks which handles PTP clock, and the condition is
consistent with timespec64_valid(). As Thomas suggested, timespec64_valid()
only check the timespec is valid, but not ensure that the time is
in a valid range, so check it ahead using timespec64_valid_strict()
in pc_clock_settime() and return -EINVAL if not valid.
There are some drivers that use tp->tv_sec and tp->tv_nsec directly to
write registers without validity checks and assume that the higher layer
has checked it, which is dangerous and will benefit from this, such as
hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(),
and some drivers can remove the checks of itself.
Cc: stable@vger.kernel.org
Fixes: 0606f422b453 ("posix clocks: Introduce dynamic clocks")
Acked-by: Richard Cochran <richardcochran@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20241009072302.1754567-2-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 214e01ad4ed7158cab66498810094fac5d09b218 upstream.
Calling into kthread unparking unconditionally is mostly harmless when
the kthread is already unparked. The wake up is then simply ignored
because the target is not in TASK_PARKED state.
However if the kthread is per CPU, the wake up is preceded by a call
to kthread_bind() which expects the task to be inactive and in
TASK_PARKED state, which obviously isn't the case if it is unparked.
As a result, calling kthread_stop() on an unparked per-cpu kthread
triggers such a warning:
WARNING: CPU: 0 PID: 11 at kernel/kthread.c:525 __kthread_bind_mask kernel/kthread.c:525
<TASK>
kthread_stop+0x17a/0x630 kernel/kthread.c:707
destroy_workqueue+0x136/0xc40 kernel/workqueue.c:5810
wg_destruct+0x1e2/0x2e0 drivers/net/wireguard/device.c:257
netdev_run_todo+0xe1a/0x1000 net/core/dev.c:10693
default_device_exit_batch+0xa14/0xa90 net/core/dev.c:11769
ops_exit_list net/core/net_namespace.c:178 [inline]
cleanup_net+0x89d/0xcc0 net/core/net_namespace.c:640
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
worker_thread+0x86d/0xd70 kernel/workqueue.c:3393
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Fix this with skipping unecessary unparking while stopping a kthread.
Link: https://lkml.kernel.org/r/20240913214634.12557-1-frederic@kernel.org
Fixes: 5c25b5ff89f0 ("workqueue: Tag bound workers with KTHREAD_IS_PER_CPU")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reported-by: syzbot+943d34fa3cf2191e3068@syzkaller.appspotmail.com
Tested-by: syzbot+943d34fa3cf2191e3068@syzkaller.appspotmail.com
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f7345ccc62a4b880cf76458db5f320725f28e400 ]
After a CPU has set itself offline and before it eventually calls
rcutree_report_cpu_dead(), there are still opportunities for callbacks
to be enqueued, for example from a softirq. When that happens on NOCB,
the rcuog wake-up is deferred through an IPI to an online CPU in order
not to call into the scheduler and risk arming the RT-bandwidth after
hrtimers have been migrated out and disabled.
But performing a synchronized IPI from a softirq is buggy as reported in
the following scenario:
WARNING: CPU: 1 PID: 26 at kernel/smp.c:633 smp_call_function_single
Modules linked in: rcutorture torture
CPU: 1 UID: 0 PID: 26 Comm: migration/1 Not tainted 6.11.0-rc1-00012-g9139f93209d1 #1
Stopper: multi_cpu_stop+0x0/0x320 <- __stop_cpus+0xd0/0x120
RIP: 0010:smp_call_function_single
<IRQ>
swake_up_one_online
__call_rcu_nocb_wake
__call_rcu_common
? rcu_torture_one_read
call_timer_fn
__run_timers
run_timer_softirq
handle_softirqs
irq_exit_rcu
? tick_handle_periodic
sysvec_apic_timer_interrupt
</IRQ>
Fix this with forcing deferred rcuog wake up through the NOCB timer when
the CPU is offline. The actual wake up will happen from
rcutree_report_cpu_dead().
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202409231644.4c55582d-lkp@intel.com
Fixes: 9139f93209d1 ("rcu/nocb: Fix RT throttling hrtimer armed from offline CPU")
Reviewed-by: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b913c3fe685e0aec80130975b0f330fd709ff324 ]
Currently IRQs are disabled on call_rcu() and then depending on the
context:
* If the CPU is in nocb mode:
- If the callback is enqueued in the bypass list, IRQs are re-enabled
implictly by rcu_nocb_try_bypass()
- If the callback is enqueued in the normal list, IRQs are re-enabled
implicitly by __call_rcu_nocb_wake()
* If the CPU is NOT in nocb mode, IRQs are reenabled explicitly from call_rcu()
This makes the code a bit hard to follow, especially as it interleaves
with nocb locking.
To make the IRQ flags coverage clearer and also in order to prepare for
moving all the nocb enqueue code to its own function, always re-enable
the IRQ flags explicitly from call_rcu().
Reviewed-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Stable-dep-of: f7345ccc62a4 ("rcu/nocb: Fix rcuog wake-up from offline softirq")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 28ead3eaabc16ecc907cfb71876da028080f6356 ]
bpf progs can be attached to kernel functions, and the attached functions
can take different parameters or return different return values. If
prog attached to one kernel function tail calls prog attached to another
kernel function, the ctx access or return value verification could be
bypassed.
For example, if prog1 is attached to func1 which takes only 1 parameter
and prog2 is attached to func2 which takes two parameters. Since verifier
assumes the bpf ctx passed to prog2 is constructed based on func2's
prototype, verifier allows prog2 to access the second parameter from
the bpf ctx passed to it. The problem is that verifier does not prevent
prog1 from passing its bpf ctx to prog2 via tail call. In this case,
the bpf ctx passed to prog2 is constructed from func1 instead of func2,
that is, the assumption for ctx access verification is bypassed.
Another example, if BPF LSM prog1 is attached to hook file_alloc_security,
and BPF LSM prog2 is attached to hook bpf_lsm_audit_rule_known. Verifier
knows the return value rules for these two hooks, e.g. it is legal for
bpf_lsm_audit_rule_known to return positive number 1, and it is illegal
for file_alloc_security to return positive number. So verifier allows
prog2 to return positive number 1, but does not allow prog1 to return
positive number. The problem is that verifier does not prevent prog1
from calling prog2 via tail call. In this case, prog2's return value 1
will be used as the return value for prog1's hook file_alloc_security.
That is, the return value rule is bypassed.
This patch adds restriction for tail call to prevent such bypasses.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20240719110059.797546-4-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1d244784be6b01162b732a5a7d637dfc024c3203 ]
Percpu map is often used, but the map value size limit often ignored,
like issue: https://github.com/iovisor/bcc/issues/2519. Actually,
percpu map value size is bound by PCPU_MIN_UNIT_SIZE, so we
can check the value size whether it exceeds PCPU_MIN_UNIT_SIZE first,
like percpu map of local_storage. Maybe the error message seems clearer
compared with "cannot allocate memory".
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240910144111.1464912-2-chen.dylane@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0b18c852cc6fb8284ac0ab97e3e840974a6a8a64 ]
The saved_cmdlines have three arrays for mapping PIDs to COMMs:
- map_pid_to_cmdline[]
- map_cmdline_to_pid[]
- saved_cmdlines
The map_pid_to_cmdline[] is PID_MAX_DEFAULT in size and holds the index
into the other arrays. The map_cmdline_to_pid[] is a mapping back to the
full pid as it can be larger than PID_MAX_DEFAULT. And the
saved_cmdlines[] just holds the COMMs associated to the pids.
Currently the map_pid_to_cmdline[] and saved_cmdlines[] are allocated
together (in reality the saved_cmdlines is just in the memory of the
rounding of the allocation of the structure as it is always allocated in
powers of two). The map_cmdline_to_pid[] array is allocated separately.
Since the rounding to a power of two is rather large (it allows for 8000
elements in saved_cmdlines), also include the map_cmdline_to_pid[] array.
(This drops it to 6000 by default, which is still plenty for most use
cases). This saves even more memory as the map_cmdline_to_pid[] array
doesn't need to be allocated.
Link: https://lore.kernel.org/linux-trace-kernel/20240212174011.068211d9@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240220140703.182330529@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Mete Durlu <meted@linux.ibm.com>
Fixes: 44dc5c41b5b1 ("tracing: Fix wasted memory in saved_cmdlines logic")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5efd3e2aef91d2d812290dcb25b2058e6f3f532c ]
This reverts 60be76eeabb3d ("tracing: Add size check when printing
trace_marker output"). The only reason the precision check was added
was because of a bug that miscalculated the write size of the string into
the ring buffer and it truncated it removing the terminating nul byte. On
reading the trace it crashed the kernel. But this was due to the bug in
the code that happened during development and should never happen in
practice. If anything, the precision can hide bugs where the string in the
ring buffer isn't nul terminated and it will not be checked.
Link: https://lore.kernel.org/all/C7E7AF1A-D30F-4D18-B8E5-AF1EF58004F5@linux.ibm.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240227125706.04279ac2@gandalf.local.home
Link: https://lore.kernel.org/all/20240302111244.3a1674be@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240304174341.2a561d9f@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 60be76eeabb3d ("tracing: Add size check when printing trace_marker output")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3840cbe24cf060ea05a585ca497814609f5d47d1 ]
Brandon reports sporadic, non-sensical spikes in cumulative pressure
time (total=) when reading cpu.pressure at a high rate. This is due to
a race condition between reader aggregation and tasks changing states.
While it affects all states and all resources captured by PSI, in
practice it most likely triggers with CPU pressure, since scheduling
events are so frequent compared to other resource events.
The race context is the live snooping of ongoing stalls during a
pressure read. The read aggregates per-cpu records for stalls that
have concluded, but will also incorporate ad-hoc the duration of any
active state that hasn't been recorded yet. This is important to get
timely measurements of ongoing stalls. Those ad-hoc samples are
calculated on-the-fly up to the current time on that CPU; since the
stall hasn't concluded, it's expected that this is the minimum amount
of stall time that will enter the per-cpu records once it does.
The problem is that the path that concludes the state uses a CPU clock
read that is not synchronized against aggregators; the clock is read
outside of the seqlock protection. This allows aggregators to race and
snoop a stall with a longer duration than will actually be recorded.
With the recorded stall time being less than the last snapshot
remembered by the aggregator, a subsequent sample will underflow and
observe a bogus delta value, resulting in an erratic jump in pressure.
Fix this by moving the clock read of the state change into the seqlock
protection. This ensures no aggregation can snoop live stalls past the
time that's recorded when the state concludes.
Reported-by: Brandon Duffany <brandon@buildbuddy.io>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219194
Link: https://lore.kernel.org/lkml/20240827121851.GB438928@cmpxchg.org/
Fixes: df77430639c9 ("psi: Reduce calls to sched_clock() in psi")
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 34820304cc2cd1804ee1f8f3504ec77813d29c8e upstream.
xol_add_vma() maps the uninitialized page allocated by __create_xol_area()
into userspace. On some architectures (x86) this memory is readable even
without VM_READ, VM_EXEC results in the same pgprot_t as VM_EXEC|VM_READ,
although this doesn't really matter, debugger can read this memory anyway.
Link: https://lore.kernel.org/all/20240929162047.GA12611@redhat.com/
Reported-by: Will Deacon <will@kernel.org>
Fixes: d4b3b6384f98 ("uprobes/core: Allocate XOL slots for uprobes use")
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 678379e1d4f7443b170939525d3312cfc37bf86b upstream.
Cloning a descriptor table picks the size that would cover all currently
opened files. That's fine for clone() and unshare(), but for close_range()
there's an additional twist - we clone before we close, and it would be
a shame to have
close_range(3, ~0U, CLOSE_RANGE_UNSHARE)
leave us with a huge descriptor table when we are not going to keep
anything past stderr, just because some large file descriptor used to
be open before our call has taken it out.
Unfortunately, it had been dealt with in an inherently racy way -
sane_fdtable_size() gets a "don't copy anything past that" argument
(passed via unshare_fd() and dup_fd()), close_range() decides how much
should be trimmed and passes that to unshare_fd().
The problem is, a range that used to extend to the end of descriptor
table back when close_range() had looked at it might very well have stuff
grown after it by the time dup_fd() has allocated a new files_struct
and started to figure out the capacity of fdtable to be attached to that.
That leads to interesting pathological cases; at the very least it's a
QoI issue, since unshare(CLONE_FILES) is atomic in a sense that it takes
a snapshot of descriptor table one might have observed at some point.
Since CLOSE_RANGE_UNSHARE close_range() is supposed to be a combination
of unshare(CLONE_FILES) with plain close_range(), ending up with a
weird state that would never occur with unshare(2) is confusing, to put
it mildly.
It's not hard to get rid of - all it takes is passing both ends of the
range down to sane_fdtable_size(). There we are under ->files_lock,
so the race is trivially avoided.
So we do the following:
* switch close_files() from calling unshare_fd() to calling
dup_fd().
* undo the calling convention change done to unshare_fd() in
60997c3d45d9 "close_range: add CLOSE_RANGE_UNSHARE"
* introduce struct fd_range, pass a pointer to that to dup_fd()
and sane_fdtable_size() instead of "trim everything past that point"
they are currently getting. NULL means "we are not going to be punching
any holes"; NR_OPEN_MAX is gone.
* make sane_fdtable_size() use find_last_bit() instead of
open-coding it; it's easier to follow that way.
* while we are at it, have dup_fd() report errors by returning
ERR_PTR(), no need to use a separate int *errorp argument.
Fixes: 60997c3d45d9 "close_range: add CLOSE_RANGE_UNSHARE"
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0bb0a5c12ecf36ad561542bbb95f96355e036a02 upstream.
osnoise_hotplug_workfn() is the asynchronous online callback for
"trace/osnoise:online". It may be congested when a CPU goes online and
offline repeatedly and is invoked for multiple times after a certain
online.
This will lead to kthread leak and timer corruption. Add a check
in start_kthread() to prevent this situation.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240924094515.3561410-2-liwei391@huawei.com
Fixes: c8895e271f79 ("trace/osnoise: Support hotplug operations")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 829e0c9f0855f26b3ae830d17b24aec103f7e915 upstream.
There is another found exception that the "timerlat/1" thread was
scheduled on CPU0, and lead to timer corruption finally:
```
ODEBUG: init active (active state 0) object: ffff888237c2e108 object type: hrtimer hint: timerlat_irq+0x0/0x220
WARNING: CPU: 0 PID: 426 at lib/debugobjects.c:518 debug_print_object+0x7d/0xb0
Modules linked in:
CPU: 0 UID: 0 PID: 426 Comm: timerlat/1 Not tainted 6.11.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:debug_print_object+0x7d/0xb0
...
Call Trace:
<TASK>
? __warn+0x7c/0x110
? debug_print_object+0x7d/0xb0
? report_bug+0xf1/0x1d0
? prb_read_valid+0x17/0x20
? handle_bug+0x3f/0x70
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? debug_print_object+0x7d/0xb0
? debug_print_object+0x7d/0xb0
? __pfx_timerlat_irq+0x10/0x10
__debug_object_init+0x110/0x150
hrtimer_init+0x1d/0x60
timerlat_main+0xab/0x2d0
? __pfx_timerlat_main+0x10/0x10
kthread+0xb7/0xe0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2d/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
```
After tracing the scheduling event, it was discovered that the migration
of the "timerlat/1" thread was performed during thread creation. Further
analysis confirmed that it is because the CPU online processing for
osnoise is implemented through workers, which is asynchronous with the
offline processing. When the worker was scheduled to create a thread, the
CPU may has already been removed from the cpu_online_mask during the offline
process, resulting in the inability to select the right CPU:
T1 | T2
[CPUHP_ONLINE] | cpu_device_down()
osnoise_hotplug_workfn() |
| cpus_write_lock()
| takedown_cpu(1)
| cpus_write_unlock()
[CPUHP_OFFLINE] |
cpus_read_lock() |
start_kthread(1) |
cpus_read_unlock() |
To fix this, skip online processing if the CPU is already offline.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240924094515.3561410-4-liwei391@huawei.com
Fixes: c8895e271f79 ("trace/osnoise: Support hotplug operations")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b484a02c9cedf8703eff8f0756f94618004bd165 upstream.
stop_kthread() is the offline callback for "trace/osnoise:online", since
commit 5bfbcd1ee57b ("tracing/timerlat: Add interface_lock around clearing
of kthread in stop_kthread()"), the following ABBA deadlock scenario is
introduced:
T1 | T2 [BP] | T3 [AP]
osnoise_hotplug_workfn() | work_for_cpu_fn() | cpuhp_thread_fun()
| _cpu_down() | osnoise_cpu_die()
mutex_lock(&interface_lock) | | stop_kthread()
| cpus_write_lock() | mutex_lock(&interface_lock)
cpus_read_lock() | cpuhp_kick_ap() |
As the interface_lock here in just for protecting the "kthread" field of
the osn_var, use xchg() instead to fix this issue. Also use
for_each_online_cpu() back in stop_per_cpu_kthreads() as it can take
cpu_read_lock() again.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240924094515.3561410-3-liwei391@huawei.com
Fixes: 5bfbcd1ee57b ("tracing/timerlat: Add interface_lock around clearing of kthread in stop_kthread()")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2a13ca2e8abb12ee43ada8a107dadca83f140937 upstream.
The cpuhp online/offline processing race also exists in percpu-mode hwlat
tracer in theory, apply the fix too. That is:
T1 | T2
[CPUHP_ONLINE] | cpu_device_down()
hwlat_hotplug_workfn() |
| cpus_write_lock()
| takedown_cpu(1)
| cpus_write_unlock()
[CPUHP_OFFLINE] |
cpus_read_lock() |
start_kthread(1) |
cpus_read_unlock() |
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240924094515.3561410-5-liwei391@huawei.com
Fixes: ba998f7d9531 ("trace/hwlat: Support hotplug operations")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b4afe4183ec77f230851ea139d91e5cf2644c68b upstream.
On a system with CXL memory, the resource tree (/proc/iomem) related to
CXL memory may look like something as follows.
490000000-50fffffff : CXL Window 0
490000000-50fffffff : region0
490000000-50fffffff : dax0.0
490000000-50fffffff : System RAM (kmem)
Because drivers/dax/kmem.c calls add_memory_driver_managed() during
onlining CXL memory, which makes "System RAM (kmem)" a descendant of "CXL
Window X". This confuses region_intersects(), which expects all "System
RAM" resources to be at the top level of iomem_resource. This can lead to
bugs.
For example, when the following command line is executed to write some
memory in CXL memory range via /dev/mem,
$ dd if=data of=/dev/mem bs=$((1 << 10)) seek=$((0x490000000 >> 10)) count=1
dd: error writing '/dev/mem': Bad address
1+0 records in
0+0 records out
0 bytes copied, 0.0283507 s, 0.0 kB/s
the command fails as expected. However, the error code is wrong. It
should be "Operation not permitted" instead of "Bad address". More
seriously, the /dev/mem permission checking in devmem_is_allowed() passes
incorrectly. Although the accessing is prevented later because ioremap()
isn't allowed to map system RAM, it is a potential security issue. During
command executing, the following warning is reported in the kernel log for
calling ioremap() on system RAM.
ioremap on RAM at 0x0000000490000000 - 0x0000000490000fff
WARNING: CPU: 2 PID: 416 at arch/x86/mm/ioremap.c:216 __ioremap_caller.constprop.0+0x131/0x35d
Call Trace:
memremap+0xcb/0x184
xlate_dev_mem_ptr+0x25/0x2f
write_mem+0x94/0xfb
vfs_write+0x128/0x26d
ksys_write+0xac/0xfe
do_syscall_64+0x9a/0xfd
entry_SYSCALL_64_after_hwframe+0x4b/0x53
The details of command execution process are as follows. In the above
resource tree, "System RAM" is a descendant of "CXL Window 0" instead of a
top level resource. So, region_intersects() will report no System RAM
resources in the CXL memory region incorrectly, because it only checks the
top level resources. Consequently, devmem_is_allowed() will return 1
(allow access via /dev/mem) for CXL memory region incorrectly.
Fortunately, ioremap() doesn't allow to map System RAM and reject the
access.
So, region_intersects() needs to be fixed to work correctly with the
resource tree with "System RAM" not at top level as above. To fix it, if
we found a unmatched resource in the top level, we will continue to search
matched resources in its descendant resources. So, we will not miss any
matched resources in resource tree anymore.
In the new implementation, an example resource tree
|------------- "CXL Window 0" ------------|
|-- "System RAM" --|
will behave similar as the following fake resource tree for
region_intersects(, IORESOURCE_SYSTEM_RAM, ),
|-- "System RAM" --||-- "CXL Window 0a" --|
Where "CXL Window 0a" is part of the original "CXL Window 0" that
isn't covered by "System RAM".
Link: https://lkml.kernel.org/r/20240906030713.204292-2-ying.huang@intel.com
Fixes: c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 62c0b1061593d7012292f781f11145b2d46f43ab upstream.
In perf_adjust_period, we will first calculate period, and then use
this period to calculate delta. However, when delta is less than 0,
there will be a deviation compared to when delta is greater than or
equal to 0. For example, when delta is in the range of [-14,-1], the
range of delta = delta + 7 is between [-7,6], so the final value of
delta/8 is 0. Therefore, the impact of -1 and -2 will be ignored.
This is unacceptable when the target period is very short, because
we will lose a lot of samples.
Here are some tests and analyzes:
before:
# perf record -e cs -F 1000 ./a.out
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.022 MB perf.data (518 samples) ]
# perf script
...
a.out 396 257.956048: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.957891: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.959730: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.961545: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.963355: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.965163: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.966973: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.968785: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.970593: 23 cs: ffffffff81f4eeec schedul>
...
after:
# perf record -e cs -F 1000 ./a.out
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.058 MB perf.data (1466 samples) ]
# perf script
...
a.out 395 59.338813: 11 cs: ffffffff81f4eeec schedul>
a.out 395 59.339707: 12 cs: ffffffff81f4eeec schedul>
a.out 395 59.340682: 13 cs: ffffffff81f4eeec schedul>
a.out 395 59.341751: 13 cs: ffffffff81f4eeec schedul>
a.out 395 59.342799: 12 cs: ffffffff81f4eeec schedul>
a.out 395 59.343765: 11 cs: ffffffff81f4eeec schedul>
a.out 395 59.344651: 11 cs: ffffffff81f4eeec schedul>
a.out 395 59.345539: 12 cs: ffffffff81f4eeec schedul>
a.out 395 59.346502: 13 cs: ffffffff81f4eeec schedul>
...
test.c
int main() {
for (int i = 0; i < 20000; i++)
usleep(10);
return 0;
}
# time ./a.out
real 0m1.583s
user 0m0.040s
sys 0m0.298s
The above results were tested on x86-64 qemu with KVM enabled using
test.c as test program. Ideally, we should have around 1500 samples,
but the previous algorithm had only about 500, whereas the modified
algorithm now has about 1400. Further more, the new version shows 1
sample per 0.001s, while the previous one is 1 sample per 0.002s.This
indicates that the new algorithm is more sensitive to small negative
values compared to old algorithm.
Fixes: bd2b5b12849a ("perf_counter: More aggressive frequency adjustment")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240831074316.2106159-2-luogengkun@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fe826cc2654e8561b64246325e6a51b62bf2488c ]
Commit 558abc7e3f89 ("perf: Fix event_function_call() locking") lost
IRQ disabling by mistake.
Fixes: 558abc7e3f89 ("perf: Fix event_function_call() locking")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4cc8c50c9abcb2646a7a4fcef3cea5dcb30c06cf ]
Currently we cannot pass the pointer returned by iter next method as
argument to KF_TRUSTED_ARGS or KF_RCU kfuncs, because the pointer
returned by iter next method is not "valid".
This patch sets the pointer returned by iter next method to be valid.
This is based on the fact that if the iterator is implemented correctly,
then the pointer returned from the iter next method should be valid.
This does not make NULL pointer valid. If the iter next method has
KF_RET_NULL flag, then the verifier will ask the ebpf program to
check NULL pointer.
KF_RCU_PROTECTED iterator is a special case, the pointer returned by
iter next method should only be valid within RCU critical section,
so it should be with MEM_RCU, not PTR_TRUSTED.
Another special case is bpf_iter_num_next, which returns a pointer with
base type PTR_TO_MEM. PTR_TO_MEM should not be combined with type flag
PTR_TRUSTED (PTR_TO_MEM already means the pointer is valid).
The pointer returned by iter next method of other types of iterators
is with PTR_TRUSTED.
In addition, this patch adds get_iter_from_state to help us get the
current iterator from the current state.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Link: https://lore.kernel.org/r/AM6PR03MB584869F8B448EA1C87B7CDA399962@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 558abc7e3f895049faa46b08656be4c60dc6e9fd ]
All the event_function/@func call context already uses perf_ctx_lock()
except for the !ctx->is_active case. Make it all consistent.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240807115550.138301094@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cfa7f3d2c526c224a6271cc78a4a27a0de06f4f0 ]
When tracing user functions with uprobe functionality, it's common to
install the probe (e.g., a BPF program) at the first instruction of the
function. This is often going to be `push %rbp` instruction in function
preamble, which means that within that function frame pointer hasn't
been established yet. This leads to consistently missing an actual
caller of the traced function, because perf_callchain_user() only
records current IP (capturing traced function) and then following frame
pointer chain (which would be caller's frame, containing the address of
caller's caller).
So when we have target_1 -> target_2 -> target_3 call chain and we are
tracing an entry to target_3, captured stack trace will report
target_1 -> target_3 call chain, which is wrong and confusing.
This patch proposes a x86-64-specific heuristic to detect `push %rbp`
(`push %ebp` on 32-bit architecture) instruction being traced. Given
entire kernel implementation of user space stack trace capturing works
under assumption that user space code was compiled with frame pointer
register (%rbp/%ebp) preservation, it seems pretty reasonable to use
this instruction as a strong indicator that this is the entry to the
function. In that case, return address is still pointed to by %rsp/%esp,
so we fetch it and add to stack trace before proceeding to unwind the
rest using frame pointer-based logic.
We also check for `endbr64` (for 64-bit modes) as another common pattern
for function entry, as suggested by Josh Poimboeuf. Even if we get this
wrong sometimes for uprobes attached not at the function entry, it's OK
because stack trace will still be overall meaningful, just with one
extra bogus entry. If we don't detect this, we end up with guaranteed to
be missing caller function entry in the stack trace, which is worse
overall.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240729175223.23914-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 11377947b5861fa59bf77c827e1dd7c081842cc9 ]
Currently, if the rcuscale module's async module parameter is specified
for RCU implementations that do not have async primitives such as RCU
Tasks Rude (which now lacks a call_rcu_tasks_rude() function), there
will be a series of splats due to calls to a NULL pointer. This commit
therefore warns of this situation, but switches to non-async testing.
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5e9629d0ae977d6f6916d7e519724804e95f0b07 ]
Use perf_allow_kernel() for 'pa_enable' (physical addresses),
'pct_enable' (physical timestamps) and context IDs. This means that
perf_event_paranoid is now taken into account and LSM hooks can be used,
which is more consistent with other perf_event_open calls. For example
PERF_SAMPLE_PHYS_ADDR uses perf_allow_kernel() rather than just
perfmon_capable().
This also indirectly fixes the following error message which is
misleading because perf_event_paranoid is not taken into account by
perfmon_capable():
$ perf record -e arm_spe/pa_enable/
Error:
Access to performance monitoring and observability operations is
limited. Consider adjusting /proc/sys/kernel/perf_event_paranoid
setting ...
Suggested-by: Al Grant <al.grant@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240827145113.1224604-1-james.clark@linaro.org
Link: https://lore.kernel.org/all/20240807120039.GD37996@noisy.programming.kicks-ass.net/
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1d7f856c2ca449f04a22d876e36b464b7a9d28b6 ]
While commit 83ab38ef0a0b ("jump_label: Fix concurrency issues in
static_key_slow_dec()") fixed one problem, it created yet another,
notably the following is now possible:
slow_dec
if (try_dec) // dec_not_one-ish, false
// enabled == 1
slow_inc
if (inc_not_disabled) // inc_not_zero-ish
// enabled == 2
return
guard((mutex)(&jump_label_mutex);
if (atomic_cmpxchg(1,0)==1) // false, we're 2
slow_dec
if (try-dec) // dec_not_one, true
// enabled == 1
return
else
try_dec() // dec_not_one, false
WARN
Use dec_and_test instead of cmpxchg(), like it was prior to
83ab38ef0a0b. Add a few WARNs for the paranoid.
Fixes: 83ab38ef0a0b ("jump_label: Fix concurrency issues in static_key_slow_dec()")
Reported-by: "Darrick J. Wong" <djwong@kernel.org>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
