| Age | Commit message (Collapse) | Author |
|---|
|
The current use-case for fixdep is: a source file is run through a single
processing step, which creates a single dependency file as a side-effect,
which fixdep transforms into the file used by the kernel build process.
In order to transparently run the C pre-processor on device-tree files,
we wish to run both gcc -E and dtc on a source file in a single rule.
This generates two dependency files, which must be transformed together
into the file used by the kernel build process. This change modifies
fixdep so it can process the concatenation of multiple separate input
dependency files, and produce a correct unified output.
The code changes have the slight benefit of transforming the loop in
parse_dep_file() into more of a lexer/tokenizer, with the loop body being
more of a parser. Previously, some of this logic was mixed together
before the loop. I also added some comments, which I hope are useful.
Benchmarking shows that on a cross-compiled ARM tegra_defconfig build,
there is less than 0.5 seconds speed decrease with this change, on top
of a build time of ~2m24s. This is probably within the noise.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
|
|
Correct spelling typo in printk within various drivers.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The introduction of include/linux/kconfig.h created 3 extraneous
dependencies:
include/config/.h
include/config/h.h
include/config/foo.h
Fix this by excluding kconfig.h from fixdep calculations.
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Move docproc from scripts/basic to scripts so it is only built for *doc
targets instead of every time the kernel is built.
|
|
Recent change to fixdep:
commit b7bd182176960fdd139486cadb9962b39f8a2b50
Author: Michal Marek <mmarek@suse.cz>
Date: Thu Feb 17 15:13:54 2011 +0100
fixdep: Do not record dependency on the source file itself
changed the format of the *.cmd files without realizing that it is also
used by modpost. Put the path to the source file to the file back, in a
special variable, so that modpost sees all source files when calculating
srcversion for modules.
Reported-and-tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The dependency is already expressed by the Makefiles, storing it in the
.cmd file breaks build if a .c file is replaced by .S or vice versa,
because the .cmd file contains
foo/bar.o: foo/bar.c ...
foo/bar.c ... :
so the foo/bar.c -> foo/bar.o rule triggers even if there is no
foo/bar.c anymore.
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Also add missing error handling to fstat call
Signed-off-by: Ben Gamari <bgamari.foss@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
|
|
I noticed fixdep uses ~2% of cpu time in kernel build, in function
use_config()
fixdep spends a lot of cpu cycles in linear searches in its internal
string array. With about 400 stored strings per dep file, this begins to
be noticeable.
Convert fixdep to use a hash table.
kbuild results on my x86_64 allmodconfig
Before patch :
real 10m30.414s
user 61m51.456s
sys 8m28.200s
real 10m12.334s
user 61m50.236s
sys 8m30.448s
real 10m42.947s
user 61m50.028s
sys 8m32.380s
After:
real 10m8.180s
user 61m22.506s
sys 8m32.384s
real 10m35.039s
user 61m21.654s
sys 8m32.212s
real 10m14.487s
user 61m23.498s
sys 8m32.312s
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (39 commits)
Revert "namespace: add source file location exceptions"
Coccinelle: Add contextual message
Coccinelle: Fix documentation
Coccinelle: Find doubled arguments to boolean or bit operators.
Coccinelle: Find nested lock+irqsave functions that use the same flags variables.
namespace: add source file location exceptions
scripts/extract-ikconfig: add support for bzip2, lzma and lzo
kbuild: check return value of asprintf()
scripts/namespace.pl: improve to get more correct results
scripts/namespace.pl: some bug fixes
scripts/namespace.pl: update file exclusion list
scripts/namespace.pl: fix wrong source path
Coccinelle: Use the -no_show_diff option for org and report mode
Coccinelle: Add a new mode named 'chain'
Coccinelle: Use new comment format to explain kfree.cocci
Coccinelle: Improve user information with a new kind of comment
Coccinelle: Update documentation
MAINTAINERS: Coccinelle: Update email address
Documentation/kbuild: modules.txt cleanup
Documentation/kbuild: major edit of modules.txt sections 5-8
...
|
|
Check return value of asprintf() in docsect() and exit if error
occurs. This removes following warning:
HOSTCC scripts/basic/docproc
scripts/basic/docproc.c: In function ‘docsect’:
scripts/basic/docproc.c:336: warning: ignoring return value of ‘asprintf’,
declared with attribute warn_unused_result
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Convert the 'dynamic debug' infrastructure to use jump labels.
Signed-off-by: Jason Baron <jbaron@redhat.com>
LKML-Reference: <b77627358cea3e27d7be4386f45f66219afb8452.1284733808.git.jbaron@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When you don't use !E or !I but only !F, then it's very easy to miss
including some functions, structs etc. in documentation. To help
finding which ones were missed, allow printing out the unused ones as
warnings.
For example, using this on mac80211 yields a lot of warnings like this:
Warning: didn't use docs for DOC: mac80211 workqueue
Warning: didn't use docs for ieee80211_max_queues
Warning: didn't use docs for ieee80211_bss_change
Warning: didn't use docs for ieee80211_bss_conf
when generating the documentation for it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (30 commits)
Use macros for .data.page_aligned section.
Use macros for .bss.page_aligned section.
Use new __init_task_data macro in arch init_task.c files.
kbuild: Don't define ALIGN and ENTRY when preprocessing linker scripts.
arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0
kbuild: add static to prototypes
kbuild: fail build if recordmcount.pl fails
kbuild: set -fconserve-stack option for gcc 4.5
kbuild: echo the record_mcount command
gconfig: disable "typeahead find" search in treeviews
kbuild: fix cc1 options check to ensure we do not use -fPIC when compiling
checkincludes.pl: add option to remove duplicates in place
markup_oops: use modinfo to avoid confusion with underscored module names
checkincludes.pl: provide usage helper
checkincludes.pl: close file as soon as we're done with it
ctags: usability fix
kernel hacking: move STRIP_ASM_SYMS from General
gitignore usr/initramfs_data.cpio.bz2 and usr/initramfs_data.cpio.lzma
kbuild: Check if linker supports the -X option
kbuild: introduce ld-option
...
Fix trivial conflict in scripts/basic/fixdep.c
|
|
Signed-off-by: Trevor Keith <tsrk@tsrk.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Ignore drivers/staging/ since it is very likely that new drivers
introduce it again.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Warnings found via gcc -Wmissing-prototypes.
Signed-off-by: Trevor Keith <tsrk@tsrk.net>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Fix the following build error when do 'make htmldocs':
DOCPROC Documentation/DocBook/debugobjects.xml
exec /scripts/kernel-doc: No such file or directory
exec /scripts/kernel-doc: No such file or directory
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
gcc-4.4.1:
HOSTCC scripts/basic/fixdep
scripts/basic/fixdep.c: In function 'traps':
scripts/basic/fixdep.c:377: warning: dereferencing type-punned pointer will break strict-aliasing rules
scripts/basic/fixdep.c:379: warning: dereferencing type-punned pointer will break strict-aliasing rules
(Apparently -fno-strict-aliasing will fix this too)
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
- getcwd returns path without a slash at the end, add the slash
- add KBUILD_SRC env support, so that we can specify path for
kernel (to know where scripts/kernel-doc resides) and SRCTREE
(for searching files referenced in .tmpl) separately
[v2]
- use KBUILD_SRC instead of a newly introduced environment variable
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
The generated 'capflags.c' file wasn't properly ignored, and the list of
files in scripts/basic/ wasn't up-to-date.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Base infrastructure to enable per-module debug messages.
I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes
control of debugging statements on a per-module basis in one /proc file,
currently, <debugfs>/dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG,
is not set, debugging statements can still be enabled as before, often by
defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no
affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set.
The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That
is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls
can be dynamically enabled/disabled on a per-module basis.
Future plans include extending this functionality to subsystems, that define
their own debug levels and flags.
Usage:
Dynamic debugging is controlled by the debugfs file,
<debugfs>/dynamic_printk/modules. This file contains a list of the modules that
can be enabled. The format of the file is as follows:
<module_name> <enabled=0/1>
.
.
.
<module_name> : Name of the module in which the debug call resides
<enabled=0/1> : whether the messages are enabled or not
For example:
snd_hda_intel enabled=0
fixup enabled=1
driver enabled=0
Enable a module:
$echo "set enabled=1 <module_name>" > dynamic_printk/modules
Disable a module:
$echo "set enabled=0 <module_name>" > dynamic_printk/modules
Enable all modules:
$echo "set enabled=1 all" > dynamic_printk/modules
Disable all modules:
$echo "set enabled=0 all" > dynamic_printk/modules
Finally, passing "dynamic_printk" at the command line enables
debugging for all modules. This mode can be turned off via the above
disable command.
[gkh: minor cleanups and tweaks to make the build work quietly]
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The !P directive includes the contents of a DOC: section
given by title, e.g.
!Pfilename Title of the section
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
When asked by a template to include all functions from a file,
it will also include DOC: sections wreaking havoc in the generated
docbook file. This patch makes it use the new -no-doc-sections
flag for kernel-doc to avoid this.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Prevent docproc from segfaulting when SRCTREE isn't set.
Signed-off-by: Rob Landley <rob@landley.net>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
- fix typos/spellos in docproc.c and Makefile
- add a little whitespace {while, switch} (coding style)
- use NULL instead of 0 for pointer testing
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Signed-off-by: Michael Opdenacker <michael@free-electrons.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
build scripts: fixdep blows segfault on string CONFIG_MODULE seen
The string "CONFIG_MODULE" appearing anywhere in a source file causes
fixdep to segfault. This string appeared in the wild in the current
mISDN sources (I think they meant CONFIG_MODULES). But it shouldn't
segfault (esp as CONFIG_MODULE appeared in a quoted string).
Signed-off-by: Andy Green <andy@warmcat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Commit 2e3646e51b2d6415549b310655df63e7e0d7a080 changed the way the
split config tree is built, but failed to also adjust fixdep accordingly
- if changing a config option from or to m, files referencing the
respective CONFIG_..._MODULE (but not the corresponding CONFIG_...)
didn't get rebuilt.
The problem is that trisate symbol are represent with three different
symbols:
SYMBOL=n => no symbol defined
SYMBOL=y => CONFIG_SYMBOL defined to '1'
SYMBOL=m => CONFIG_SYMBOL_MODULE defined to '1'
But conf_split_config do not distingush between the =y and =m case, so
only the =y case is honoured.
This is fixed in fixdep so when a CONFIG symbol with _MODULE is found we
skip that part and only look for the CONFIG_SYMBOL version.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Correct a few comments in kernel-doc Doc and source files.
(akpm: note: the patch removes a non-ascii character and might have to be
applied by hand..)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Adds a missing exit, if the file that should be parsed couldn't be opened.
Without it crashes with a segfault, cause the filedescriptor is accessed
even if the file could not be opened.
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Now that kconfig can load multiple configurations, it becomes simple to
integrate the split config step, by simply comparing the new .config file with
the old auto.conf (and then saving the new auto.conf). A nice side effect is
that this saves a bit of disk space and cache, as no data needs to be read
from or saved into the splitted config files anymore (e.g. include/config is
now 648KB instead of 5.2MB).
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
While the recent change to also escape # symbols when storing C-file
compilation command lines was helpful, it should be in effect for all
command lines, as much as the dollar escaping should be in effect for
C-source compilation commands. Additionally, for better readability and
maintenance, consolidating all the escaping (single quotes, dollars,
and now sharps) was also desirable.
Signed-Off-By: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Commandlines are contained in the .<target>.cmd files and in case they
contain a '#' char make see this as start of comment.
Teach fixdep to escape the '#' char so make will assing the full commandline.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This still leaves driver and architecture-specific subdirectories alone,
but gets rid of the bulk of the "generic" generated files that we should
ignore.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
scripts/ is full of mismatches between char* params an signed char* arguments,
and viceversa. gcc4 now complaints loud about this. Patch below deletes all
those 'signed'.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
A coworker of mine give them a look-over and spotted a few
places where I missed changing some casts.
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
The following set of patches is based loosely on the patches that
Jean-Christophe Dubois came up with for 2.6.7. Where as the original
patches added a number of casts to unsigned char, I went the route of
making the chars be explicitly signed. I honestly don't know which
route is better to go down. Doing this is the bulk of the patch. Out
of the rest of the odds 'n ends is that on Solaris, Elf32_Word is a
ulong, which means all of the printf's are unhappy (uint format, ulong
arg) for most of the typedefs.
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
The following patch fixes up 'htmldocs' and related to work when
trees are being built with O=. I fixed it all up by passing the srctree
as an env-var to docproc (and thus what it calls) and then pull that out
when needed.
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
You probably saw that if you change one config option, even if
linux/autoconf.h (which is included by everything) changes, the kernel is
smart enough not to recompile everything. But with UML this no more holds.
Why? Because, as you see in this patch, fixdep avoids making anything depend
onto linux/autoconf.h *explicitly*, but nobody taught him to do the same for
arch/um/include/uml-config.h. So apply this patch. Do not say "I don't want
to change the generic Kbuild for one arch": this cannot hurt. It's a bugfix
for us, a no-op for others.
Note: with this patch, fixdep will still add a dependency from a file
containing UML_CONFIG_BYE onto CONFIG_BYE. Since someone could think that
fixdep should grep for [^A-Z_]CONFIG_ rather than simply for CONFIG_, I've
added a comment that ask *not to fix* this "bug".
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
From: Benno <benjl@cse.unsw.edu.au>
When compiling Linux on Mac OSX I had trouble with scripts/sumversion.c.
It includes <netinet/in.h> to obtain to definitions of htonl and ntohl.
On Mac OSX these are found in <arpa/inet.h>. After checking the POSIX
specification it appears that this is the correct place to get
the definitons for these functions.
(http://www.opengroup.org/onlinepubs/009695399/functions/htonl.html)
Using this header also appears to work on Linux (at least with
Glibc-2.3.2).
It seems clearer to me to go with the POSIX standard than implementing
#if __APPLE__ style macros, but if such an approach is preferred I can
supply patches for that instead.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
From: Ingo Molnar <mingo@elte.hu>
|
|
From: Sam Ravnborg <sam@ravnborg.org>
Ingo said:
Starting at around 2.6.4-rc2-mm1, I keep seeing 'scripts/fixdep: Text
file busy' messages when doing a -j10 bzImage build - which seems to
suggest that by the time fixdep is used by the build system it's not
built yet.
Sam said:
I was pretty sure it was something I had caused, so I gave it a spin. What
actually happened was that we tried to build the target 'silentoldconfig'
in parrallel with 'scripts'. Since 'silentoldconfig' started a new make
and then the config target needed 'scripts' we saw two parallel runs.
The way I decided to fix it was to split scripts/ in two parts. The first
part is now the very basic stuff - moved to scripts/basic/. The second
part is dependent on kernel config etc. and kept in scripts/
In the 2.7 timeframe i will redo this initial stuff - it's becoming too
messy for anyone to understand today.
Description:
Fix dependencies in early phases of kernel build. This solves a few
problems nively: modpost is no longer rebuild twicewhen reaching the
'target' state 'make -j10' now works nicely again
The patch is rather large due to the following file moves:
mkdir scripts/basic
mv scripts/fixdep.c scripts/basic
mv scripts/split-include.c scripts/basic
mv scripts/docproc.c scripts/basic
|
