summaryrefslogtreecommitdiff
path: root/tools/testing/selftests
AgeCommit message (Collapse)Author
2023-06-09selftests: mptcp: userspace pm: skip if MPTCP is not supportedMatthieu Baerts
commit 63212608a92a1ff10ae56dbb14e9fb685f7e4ffa upstream. Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 259a834fadda ("selftests: mptcp: functional tests for the userspace PM type") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-09selftests: mptcp: sockopt: skip if MPTCP is not supportedMatthieu Baerts
commit cf6f0fda7af7e8e016070bfee6b189e671a0c776 upstream. Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: dc65fe82fb07 ("selftests: mptcp: add packet mark test case") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-09selftests: mptcp: simult flows: skip if MPTCP is not supportedMatthieu Baerts
commit 9161f21c74a1a0e7bb39eb84ea0c86b23c92fc87 upstream. Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-09selftests: mptcp: diag: skip if MPTCP is not supportedMatthieu Baerts
commit 46565acdd29facbf418a11e4a3791b3c8967308d upstream. Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-09selftests: mptcp: join: avoid using 'cmp --bytes'Matthieu Baerts
commit d328fe87067480cf2bd0b58dab428a98d31dbb7e upstream. BusyBox's 'cmp' command doesn't support the '--bytes' parameter. Some CIs -- i.e. LKFT -- use BusyBox and have the mptcp_join.sh test failing [1] because their 'cmp' command doesn't support this '--bytes' option: cmp: unrecognized option '--bytes=1024' BusyBox v1.35.0 () multi-call binary. Usage: cmp [-ls] [-n NUM] FILE1 [FILE2] Instead, 'head --bytes' can be used as this option is supported by BusyBox. A temporary file is needed for this operation. Because it is apparently quite common to use BusyBox, it is certainly better to backport this fix to impacted kernels. Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Link: https://qa-reports.linaro.org/lkft/linux-mainline-master/build/v6.3-rc5-5-g148341f0a2f5/testrun/16088933/suite/kselftest-net-mptcp/test/net_mptcp_userspace_pm_sh/log [1] Suggested-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-09selftests: mptcp: join: skip if MPTCP is not supportedMatthieu Baerts
commit 715c78a82e00f848f99ef76e6f6b89216ccba268 upstream. Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-09selftests: mptcp: pm nl: skip if MPTCP is not supportedMatthieu Baerts
commit 0f4955a40dafe18a1122e3714d8173e4b018e869 upstream. Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: eedbc685321b ("selftests: add PM netlink functional tests") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-09selftests: mptcp: connect: skip if MPTCP is not supportedMatthieu Baerts
commit d83013bdf90a7994a474b0e650a7fc94b0d4ded6 upstream. Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Note that this check can also mark the test as failed if 'SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES' env var is set to 1: by doing that, we can make sure a test is not being skipped by mistake. A new shared file is added here to be able to re-used the same check in the different selftests we have. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-09selftests/ftrace: Choose target function for filter test from samplesMasami Hiramatsu (Google)
[ Upstream commit eb50d0f250e96ede9192d936d220cd97adc93b89 ] Since the event-filter-function.tc expects the 'exit_mmap()' directly calls 'kmem_cache_free()', this is vulnerable to code modifications. Choose the target function for the filter test from the sample event data so that it can keep test running correctly even if the caller function name will be changed. Link: https://lore.kernel.org/linux-trace-kernel/167919441260.1922645.18355804179347364057.stgit@mhiramat.roam.corp.google.com/ Link: https://lore.kernel.org/all/CA+G9fYtF-XEKi9YNGgR=Kf==7iRb2FrmEC7qtwAeQbfyah-UhA@mail.gmail.com/ Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Fixes: 7f09d639b8c4 ("tracing/selftests: Add test for event filtering on function name") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-05selftests/bpf: Fix pkg-config call building sign-fileJeremy Sowden
[ Upstream commit 5f5486b620cd43b16a1787ef92b9bc21bd72ef2e ] When building sign-file, the call to get the CFLAGS for libcrypto is missing white-space between `pkg-config` and `--cflags`: $(shell $(HOSTPKG_CONFIG)--cflags libcrypto 2> /dev/null) Removing the redirection of stderr, we see: $ make -C tools/testing/selftests/bpf sign-file make: Entering directory '[...]/tools/testing/selftests/bpf' make: pkg-config--cflags: No such file or directory SIGN-FILE sign-file make: Leaving directory '[...]/tools/testing/selftests/bpf' Add the missing space. Fixes: fc97590668ae ("selftests/bpf: Add test for bpf_verify_pkcs7_signature() kfunc") Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com> Link: https://lore.kernel.org/bpf/20230426215032.415792-1-jeremy@azazel.net Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-30selftests: fib_tests: mute cleanup error messagePo-Hsu Lin
commit d226b1df361988f885c298737d6019c863a25f26 upstream. In the end of the test, there will be an error message induced by the `ip netns del ns1` command in cleanup() Tests passed: 201 Tests failed: 0 Cannot remove namespace file "/run/netns/ns1": No such file or directory This can even be reproduced with just `./fib_tests.sh -h` as we're calling cleanup() on exit. Redirect the error message to /dev/null to mute it. V2: Update commit message and fixes tag. V3: resubmit due to missing netdev ML in V2 Fixes: b60417a9f2b8 ("selftest: fib_tests: Always cleanup before exit") Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24net: selftests: Fix optstringBenjamin Poirier
[ Upstream commit 9ba9485b87ac97fd159abdb4cbd53099bc9f01c6 ] The cited commit added a stray colon to the 'v' option. That makes the option work incorrectly. ex: tools/testing/selftests/net# ./fib_nexthops.sh -v (should enable verbose mode, instead it shows help text due to missing arg) Fixes: 5feba4727395 ("selftests: fib_nexthops: Make ping timeout configurable") Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24selftets: seg6: disable rp_filter by default in srv6_end_dt4_l3vpn_testAndrea Mayer
[ Upstream commit f97b8401e0deb46ad1e4245c21f651f64f55aaa6 ] On some distributions, the rp_filter is automatically set (=1) by default on a netdev basis (also on VRFs). In an SRv6 End.DT4 behavior, decapsulated IPv4 packets are routed using the table associated with the VRF bound to that tunnel. During lookup operations, the rp_filter can lead to packet loss when activated on the VRF. Therefore, we chose to make this selftest more robust by explicitly disabling the rp_filter during tests (as it is automatically set by some Linux distributions). Fixes: 2195444e09b4 ("selftests: add selftest for the SRv6 End.DT4 behavior") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Tested-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24selftests: seg6: disable DAD on IPv6 router cfg for srv6_end_dt4_l3vpn_testAndrea Mayer
[ Upstream commit 21a933c79a33add3612808f3be4ad65dd4dc026b ] The srv6_end_dt4_l3vpn_test instantiates a virtual network consisting of several routers (rt-1, rt-2) and hosts. When the IPv6 addresses of rt-{1,2} routers are configured, the Deduplicate Address Detection (DAD) kicks in when enabled in the Linux distros running the selftests. DAD is used to check whether an IPv6 address is already assigned in a network. Such a mechanism consists of sending an ICMPv6 Echo Request and waiting for a reply. As the DAD process could take too long to complete, it may cause the failing of some tests carried out by the srv6_end_dt4_l3vpn_test script. To make the srv6_end_dt4_l3vpn_test more robust, we disable DAD on routers since we configure the virtual network manually and do not need any address deduplication mechanism at all. Fixes: 2195444e09b4 ("selftests: add selftest for the SRv6 End.DT4 behavior") Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24KVM: selftests: Add 'malloc' failure check in vcpu_save_stateIvan Orlov
[ Upstream commit 735b0e0f2d001b7ed9486db84453fb860e764a4d ] There is a 'malloc' call in vcpu_save_state function, which can be unsuccessful. This patch will add the malloc failure checking to avoid possible null dereference and give more information about test fail reasons. Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Link: https://lore.kernel.org/r/20230322144528.704077-1-ivan.orlov0322@gmail.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24selftests: cgroup: Add 'malloc' failures checks in test_memcontrolIvan Orlov
[ Upstream commit c83f320e55a49abd90629f42a72897afd579e0de ] There are several 'malloc' calls in test_memcontrol, which can be unsuccessful. This patch will add 'malloc' failures checking to give more details about test's fail reasons and avoid possible undefined behavior during the future null dereference (like the one in alloc_anon_50M_check_swap function). Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17selftests: netfilter: fix libmnl pkg-config usageJeremy Sowden
[ Upstream commit de4773f0235acf74554f6a64ea60adc0d7b01895 ] 1. Don't hard-code pkg-config 2. Remove distro-specific default for CFLAGS 3. Use pkg-config for LDLIBS Fixes: a50a88f026fb ("selftests: netfilter: fix a build error on openSUSE") Suggested-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17selftests: srv6: make srv6_end_dt46_l3vpn_test more robustAndrea Mayer
[ Upstream commit 46ef24c60f8ee70662968ac55325297ed4624d61 ] On some distributions, the rp_filter is automatically set (=1) by default on a netdev basis (also on VRFs). In an SRv6 End.DT46 behavior, decapsulated IPv4 packets are routed using the table associated with the VRF bound to that tunnel. During lookup operations, the rp_filter can lead to packet loss when activated on the VRF. Therefore, we chose to make this selftest more robust by explicitly disabling the rp_filter during tests (as it is automatically set by some Linux distributions). Fixes: 03a0b567a03d ("selftests: seg6: add selftest for SRv6 End.DT46 Behavior") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Tested-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11tracing/user_events: Ensure write index cannot be negativeBeau Belgrave
[ Upstream commit cd98c93286a30cc4588dfd02453bec63c2f4acf4 ] The write index indicates which event the data is for and accesses a per-file array. The index is passed by user processes during write() calls as the first 4 bytes. Ensure that it cannot be negative by returning -EINVAL to prevent out of bounds accesses. Update ftrace self-test to ensure this occurs properly. Link: https://lkml.kernel.org/r/20230425225107.8525-2-beaub@linux.microsoft.com Fixes: 7f5a08c79df3 ("user_events: Add minimal support for trace_event into ftrace") Reported-by: Doug Cook <dcook@linux.microsoft.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/powerpc/pmu: Fix sample field check in the ↵Kajol Jain
mmcra_thresh_marked_sample_test [ Upstream commit 8a32341cf04ba05974931b4664683c2c9fb84e56 ] The testcase verifies the setting of different fields in Monitor Mode Control Register A (MMCRA). In the current code, EV_CODE_EXTRACT macro is used to extract the "sample" field, which then needs to be further processed to fetch rand_samp_elig and rand_samp_mode bits. But the current code is not passing valid sample field to EV_CODE_EXTRACT macro. Patch addresses this by fixing the input for EV_CODE_EXTRACT. Fixes: 29cf373c5766 ("selftests/powerpc/pmu: Add interface test for mmcra register fields") Reported-by: David Binderman <dcb314@hotmail.com> Link: https://lore.kernel.org/r/DB6P189MB0568CF002762C6C43AF6DF169CA89@DB6P189MB0568.EURP189.PROD.OUTLOOK.COM Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230301170918.69176-1-kjain@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11net/sched: sch_fq: fix integer overflow of "credit"Davide Caratti
[ Upstream commit 7041101ff6c3073fd8f2e99920f535b111c929cb ] if sch_fq is configured with "initial quantum" having values greater than INT_MAX, the first assignment of "credit" does signed integer overflow to a very negative value. In this situation, the syzkaller script provided by Cristoph triggers the CPU soft-lockup warning even with few sockets. It's not an infinite loop, but "credit" wasn't probably meant to be minus 2Gb for each new flow. Capping "initial quantum" to INT_MAX proved to fix the issue. v2: validation of "initial quantum" is done in fq_policy, instead of open coding in fq_change() _ suggested by Jakub Kicinski Reported-by: Christoph Paasch <cpaasch@apple.com> Link: https://github.com/multipath-tcp/mptcp_net-next/issues/377 Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler") Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/r/7b3a3c7e36d03068707a021760a194a8eb5ad41a.1682002300.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/bpf: Fix leaked bpf_link in get_stackid_cannot_attachSong Liu
[ Upstream commit c1e07a80cf23d3a6e96172bc9a73bfa912a9fcbc ] skel->links.oncpu is leaked in one case. This causes test perf_branches fails when it runs after get_stackid_cannot_attach: ./test_progs -t get_stackid_cannot_attach,perf_branches 84 get_stackid_cannot_attach:OK test_perf_branches_common:PASS:test_perf_branches_load 0 nsec test_perf_branches_common:PASS:attach_perf_event 0 nsec test_perf_branches_common:PASS:set_affinity 0 nsec check_good_sample:FAIL:output not valid no valid sample from prog 146/1 perf_branches/perf_branches_hw:FAIL 146/2 perf_branches/perf_branches_no_hw:OK 146 perf_branches:FAIL All error logs: test_perf_branches_common:PASS:test_perf_branches_load 0 nsec test_perf_branches_common:PASS:attach_perf_event 0 nsec test_perf_branches_common:PASS:set_affinity 0 nsec check_good_sample:FAIL:output not valid no valid sample from prog 146/1 perf_branches/perf_branches_hw:FAIL 146 perf_branches:FAIL Summary: 1/1 PASSED, 0 SKIPPED, 1 FAILED Fix this by adding the missing bpf_link__destroy(). Fixes: 346938e9380c ("selftests/bpf: Add get_stackid_cannot_attach") Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230412210423.900851-3-song@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/bpf: Use read_perf_max_sample_freq() in perf_event_stackmapSong Liu
[ Upstream commit de6d014a09bf12a9a8959d60c0a1d4a41d394a89 ] Currently, perf_event sample period in perf_event_stackmap is set too low that the test fails randomly. Fix this by using the max sample frequency, from read_perf_max_sample_freq(). Move read_perf_max_sample_freq() to testing_helpers.c. Replace the CHECK() with if-printf, as CHECK is not available in testing_helpers.c. Fixes: 1da4864c2b20 ("selftests/bpf: Add callchain_stackid") Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230412210423.900851-2-song@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/bpf: Wait for receive in cg_storage_multi testYiFei Zhu
[ Upstream commit 5af607a861d43ffff830fc1890033e579ec44799 ] In some cases the loopback latency might be large enough, causing the assertion on invocations to be run before ingress prog getting executed. The assertion would fail and the test would flake. This can be reliably reproduced by arbitrarily increasing the loopback latency (thanks to [1]): tc qdisc add dev lo root handle 1: htb default 12 tc class add dev lo parent 1:1 classid 1:12 htb rate 20kbps ceil 20kbps tc qdisc add dev lo parent 1:12 netem delay 100ms Fix this by waiting on the receive end, instead of instantly returning to the assert. The call to read() will wait for the default SO_RCVTIMEO timeout of 3 seconds provided by start_server(). [1] https://gist.github.com/kstevens715/4598301 Reported-by: Martin KaFai Lau <martin.lau@linux.dev> Link: https://lore.kernel.org/bpf/9c5c8b7e-1d89-a3af-5400-14fde81f4429@linux.dev/ Fixes: 3573f384014f ("selftests/bpf: Test CGROUP_STORAGE behavior on shared egress + ingress") Acked-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: YiFei Zhu <zhuyifei@google.com> Link: https://lore.kernel.org/r/20230405193354.1956209-1-zhuyifei@google.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests: xsk: Deflakify STATS_RX_DROPPED testKal Conley
[ Upstream commit 68e7322142f5e731af222892d384d311835db0f1 ] Fix flaky STATS_RX_DROPPED test. The receiver calls getsockopt after receiving the last (valid) packet which is not the final packet sent in the test (valid and invalid packets are sent in alternating fashion with the final packet being invalid). Since the last packet may or may not have been dropped already, both outcomes must be allowed. This issue could also be fixed by making sure the last packet sent is valid. This alternative is left as an exercise to the reader (or the benevolent maintainers of this file). This problem was quite visible on certain setups. On one machine this failure was observed 50% of the time. Also, remove a redundant assignment of pkt_stream->nb_pkts. This field is already initialized by __pkt_stream_alloc. Fixes: 27e934bec35b ("selftests: xsk: make stat tests not spin on getsockopt") Signed-off-by: Kal Conley <kal.conley@dectris.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/r/20230403120400.31018-1-kal.conley@dectris.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests: xsk: Disable IPv6 on VETH1Kal Conley
[ Upstream commit f2b50f17268390567bc0e95642170d88f336c8f4 ] This change fixes flakiness in the BIDIRECTIONAL test: # [is_pkt_valid] expected length [60], got length [90] not ok 1 FAIL: SKB BUSY-POLL BIDIRECTIONAL When IPv6 is enabled, the interface will periodically send MLDv1 and MLDv2 packets. These packets can cause the BIDIRECTIONAL test to fail since it uses VETH0 for RX. For other tests, this was not a problem since they only receive on VETH1 and IPv6 was already disabled on VETH0. Fixes: a89052572ebb ("selftests/bpf: Xsk selftests framework") Signed-off-by: Kal Conley <kal.conley@dectris.com> Link: https://lore.kernel.org/r/20230405082905.6303-1-kal.conley@dectris.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests: xsk: Use correct UMEM size in testapp_invalid_descKal Conley
[ Upstream commit 7a2050df244e2c9a4e90882052b7907450ad10ed ] Avoid UMEM_SIZE macro in testapp_invalid_desc which is incorrect when the frame size is not XSK_UMEM__DEFAULT_FRAME_SIZE. Also remove the macro since it's no longer being used. Fixes: 909f0e28207c ("selftests: xsk: Add tests for 2K frame size") Signed-off-by: Kal Conley <kal.conley@dectris.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/r/20230403145047.33065-2-kal.conley@dectris.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11bpf: Fix __reg_bound_offset 64->32 var_off subreg propagationDaniel Borkmann
[ Upstream commit 7be14c1c9030f73cc18b4ff23b78a0a081f16188 ] Xu reports that after commit 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking"), the following BPF program is rejected by the verifier: 0: (61) r2 = *(u32 *)(r1 +0) ; R2_w=pkt(off=0,r=0,imm=0) 1: (61) r3 = *(u32 *)(r1 +4) ; R3_w=pkt_end(off=0,imm=0) 2: (bf) r1 = r2 3: (07) r1 += 1 4: (2d) if r1 > r3 goto pc+8 5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) 6: (18) r0 = 0x7fffffffffffff10 8: (0f) r1 += r0 ; R1_w=scalar(umin=0x7fffffffffffff10,umax=0x800000000000000f) 9: (18) r0 = 0x8000000000000000 11: (07) r0 += 1 12: (ad) if r0 < r1 goto pc-2 13: (b7) r0 = 0 14: (95) exit And the verifier log says: func#0 @0 0: R1=ctx(off=0,imm=0) R10=fp0 0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=pkt(off=0,r=0,imm=0) 1: (61) r3 = *(u32 *)(r1 +4) ; R1=ctx(off=0,imm=0) R3_w=pkt_end(off=0,imm=0) 2: (bf) r1 = r2 ; R1_w=pkt(off=0,r=0,imm=0) R2_w=pkt(off=0,r=0,imm=0) 3: (07) r1 += 1 ; R1_w=pkt(off=1,r=0,imm=0) 4: (2d) if r1 > r3 goto pc+8 ; R1_w=pkt(off=1,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) 5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) R2_w=pkt(off=0,r=1,imm=0) 6: (18) r0 = 0x7fffffffffffff10 ; R0_w=9223372036854775568 8: (0f) r1 += r0 ; R0_w=9223372036854775568 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775823,s32_min=-240,s32_max=15) 9: (18) r0 = 0x8000000000000000 ; R0_w=-9223372036854775808 11: (07) r0 += 1 ; R0_w=-9223372036854775807 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775809) 13: (b7) r0 = 0 ; R0_w=0 14: (95) exit from 12 to 11: R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775810,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775806 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775806 R1_w=scalar(umin=9223372036854775810,umax=9223372036854775810,var_off=(0x8000000000000000; 0xffffffff)) 13: safe [...] from 12 to 11: R0_w=-9223372036854775795 R1=scalar(umin=9223372036854775822,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775794 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775794 R1=scalar(umin=9223372036854775822,umax=9223372036854775822,var_off=(0x8000000000000000; 0xffffffff)) 13: safe from 12 to 11: R0_w=-9223372036854775794 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775793 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 13: safe from 12 to 11: R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775792 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775792 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 13: safe [...] The 64bit umin=9223372036854775810 bound continuously bumps by +1 while umax=9223372036854775823 stays as-is until the verifier complexity limit is reached and the program gets finally rejected. During this simulation, the umin also eventually surpasses umax. Looking at the first 'from 12 to 11' output line from the loop, R1 has the following state: R1_w=scalar(umin=0x8000000000000002 (9223372036854775810), umax=0x800000000000000f (9223372036854775823), var_off=(0x8000000000000000; 0xffffffff)) The var_off has technically not an inconsistent state but it's very imprecise and far off surpassing 64bit umax bounds whereas the expected output with refined known bits in var_off should have been like: R1_w=scalar(umin=0x8000000000000002 (9223372036854775810), umax=0x800000000000000f (9223372036854775823), var_off=(0x8000000000000000; 0xf)) In the above log, var_off stays as var_off=(0x8000000000000000; 0xffffffff) and does not converge into a narrower mask where more bits become known, eventually transforming R1 into a constant upon umin=9223372036854775823, umax=9223372036854775823 case where the verifier would have terminated and let the program pass. The __reg_combine_64_into_32() marks the subregister unknown and propagates 64bit {s,u}min/{s,u}max bounds to their 32bit equivalents iff they are within the 32bit universe. The question came up whether __reg_combine_64_into_32() should special case the situation that when 64bit {s,u}min bounds have the same value as 64bit {s,u}max bounds to then assign the latter as well to the 32bit reg->{s,u}32_{min,max}_value. As can be seen from the above example however, that is just /one/ special case and not a /generic/ solution given above example would still not be addressed this way and remain at an imprecise var_off=(0x8000000000000000; 0xffffffff). The improvement is needed in __reg_bound_offset() to refine var32_off with the updated var64_off instead of the prior reg->var_off. The reg_bounds_sync() code first refines information about the register's min/max bounds via __update_reg_bounds() from the current var_off, then in __reg_deduce_bounds() from sign bit and with the potentially learned bits from bounds it'll update the var_off tnum in __reg_bound_offset(). For example, intersecting with the old var_off might have improved bounds slightly, e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc), then new var_off will then result in (0; 0x7f...fc). The intersected var64_off holds then the universe which is a superset of var32_off. The point for the latter is not to broaden, but to further refine known bits based on the intersection of var_off with 32 bit bounds, so that we later construct the final var_off from upper and lower 32 bits. The final __update_reg_bounds() can then potentially still slightly refine bounds if more bits became known from the new var_off. After the improvement, we can see R1 converging successively: func#0 @0 0: R1=ctx(off=0,imm=0) R10=fp0 0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=pkt(off=0,r=0,imm=0) 1: (61) r3 = *(u32 *)(r1 +4) ; R1=ctx(off=0,imm=0) R3_w=pkt_end(off=0,imm=0) 2: (bf) r1 = r2 ; R1_w=pkt(off=0,r=0,imm=0) R2_w=pkt(off=0,r=0,imm=0) 3: (07) r1 += 1 ; R1_w=pkt(off=1,r=0,imm=0) 4: (2d) if r1 > r3 goto pc+8 ; R1_w=pkt(off=1,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) 5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) R2_w=pkt(off=0,r=1,imm=0) 6: (18) r0 = 0x7fffffffffffff10 ; R0_w=9223372036854775568 8: (0f) r1 += r0 ; R0_w=9223372036854775568 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775823,s32_min=-240,s32_max=15) 9: (18) r0 = 0x8000000000000000 ; R0_w=-9223372036854775808 11: (07) r0 += 1 ; R0_w=-9223372036854775807 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775809) 13: (b7) r0 = 0 ; R0_w=0 14: (95) exit from 12 to 11: R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775810,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775806 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775806 R1_w=-9223372036854775806 13: safe from 12 to 11: R0_w=-9223372036854775806 R1_w=scalar(umin=9223372036854775811,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775805 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775805 R1_w=-9223372036854775805 13: safe [...] from 12 to 11: R0_w=-9223372036854775798 R1=scalar(umin=9223372036854775819,umax=9223372036854775823,var_off=(0x8000000000000008; 0x7),s32_min=8,s32_max=15,u32_min=8,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775797 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775797 R1=-9223372036854775797 13: safe from 12 to 11: R0_w=-9223372036854775797 R1=scalar(umin=9223372036854775820,umax=9223372036854775823,var_off=(0x800000000000000c; 0x3),s32_min=12,s32_max=15,u32_min=12,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775796 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775796 R1=-9223372036854775796 13: safe from 12 to 11: R0_w=-9223372036854775796 R1=scalar(umin=9223372036854775821,umax=9223372036854775823,var_off=(0x800000000000000c; 0x3),s32_min=12,s32_max=15,u32_min=12,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775795 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775795 R1=-9223372036854775795 13: safe from 12 to 11: R0_w=-9223372036854775795 R1=scalar(umin=9223372036854775822,umax=9223372036854775823,var_off=(0x800000000000000e; 0x1),s32_min=14,s32_max=15,u32_min=14,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775794 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775794 R1=-9223372036854775794 13: safe from 12 to 11: R0_w=-9223372036854775794 R1=-9223372036854775793 R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775793 12: (ad) if r0 < r1 goto pc-2 last_idx 12 first_idx 12 parent didn't have regs=1 stack=0 marks: R0_rw=P-9223372036854775801 R1_r=scalar(umin=9223372036854775815,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 last_idx 11 first_idx 11 regs=1 stack=0 before 11: (07) r0 += 1 parent didn't have regs=1 stack=0 marks: R0_rw=P-9223372036854775805 R1_rw=scalar(umin=9223372036854775812,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0 last_idx 12 first_idx 0 regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2 regs=1 stack=0 before 11: (07) r0 += 1 regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2 regs=1 stack=0 before 11: (07) r0 += 1 regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2 regs=1 stack=0 before 11: (07) r0 += 1 regs=1 stack=0 before 9: (18) r0 = 0x8000000000000000 last_idx 12 first_idx 12 parent didn't have regs=2 stack=0 marks: R0_rw=P-9223372036854775801 R1_r=Pscalar(umin=9223372036854775815,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 last_idx 11 first_idx 11 regs=2 stack=0 before 11: (07) r0 += 1 parent didn't have regs=2 stack=0 marks: R0_rw=P-9223372036854775805 R1_rw=Pscalar(umin=9223372036854775812,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0 last_idx 12 first_idx 0 regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2 regs=2 stack=0 before 11: (07) r0 += 1 regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2 regs=2 stack=0 before 11: (07) r0 += 1 regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2 regs=2 stack=0 before 11: (07) r0 += 1 regs=2 stack=0 before 9: (18) r0 = 0x8000000000000000 regs=2 stack=0 before 8: (0f) r1 += r0 regs=3 stack=0 before 6: (18) r0 = 0x7fffffffffffff10 regs=2 stack=0 before 5: (71) r1 = *(u8 *)(r2 +0) 13: safe from 4 to 13: safe verification time 322 usec stack depth 0 processed 56 insns (limit 1000000) max_states_per_insn 1 total_states 3 peak_states 3 mark_read 1 This also fixes up a test case along with this improvement where we match on the verifier log. The updated log now has a refined var_off, too. Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: Xu Kuohai <xukuohai@huaweicloud.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20230314203424.4015351-2-xukuohai@huaweicloud.com Link: https://lore.kernel.org/bpf/20230322213056.2470-1-daniel@iogearbox.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/bpf: Fix a fd leak in an error path in network_helpers.cMartin KaFai Lau
[ Upstream commit 226efec2b0efad60d4a6c4b2c3a8710dafc4dc21 ] In __start_server, it leaks a fd when setsockopt(SO_REUSEPORT) fails. This patch fixes it. Fixes: eed92afdd14c ("bpf: selftest: Test batching and bpf_(get|set)sockopt in bpf tcp iter") Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20230316000726.1016773-2-martin.lau@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/bpf: Fix flaky fib_lookup testMartin KaFai Lau
[ Upstream commit a6865576317f6249f3f83cf4c10ab56e627ee153 ] There is a report that fib_lookup test is flaky when running in parallel. A symptom of slowness or delay. An example: Testing IPv6 stale neigh set_lookup_params:PASS:inet_pton(IPV6_IFACE_ADDR) 0 nsec test_fib_lookup:PASS:bpf_prog_test_run_opts 0 nsec test_fib_lookup:FAIL:fib_lookup_ret unexpected fib_lookup_ret: actual 0 != expected 7 test_fib_lookup:FAIL:dmac not match unexpected dmac not match: actual 1 != expected 0 dmac expected 11:11:11:11:11:11 actual 00:00:00:00:00:00 [ Note that the "fib_lookup_ret unexpected fib_lookup_ret actual 0 ..." is reversed in terms of expected and actual value. Fixing in this patch also. ] One possibility is the testing stale neigh entry was marked dead by the gc (in neigh_periodic_work). The default gc_stale_time sysctl is 60s. This patch increases it to 15 mins. It also: - fixes the reversed arg (actual vs expected) in one of the ASSERT_EQ test - removes the nodad command arg when adding v4 neigh entry which currently has a warning. Fixes: 168de0233586 ("selftests/bpf: Add bpf_fib_lookup test") Reported-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230309060244.3242491-1-martin.lau@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/bpf: move SYS() macro into the test_progs.hHangbin Liu
[ Upstream commit b61987d37cbee3c44e80304598c60b163553926b ] A lot of tests defined SYS() macro to run system calls with goto label. Let's move this macro to test_progs.h and add configurable "goto_label" as the first arg. Suggested-by: Martin KaFai Lau <martin.lau@linux.dev> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20230224061343.506571-2-liuhangbin@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Stable-dep-of: a6865576317f ("selftests/bpf: Fix flaky fib_lookup test") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/bpf: Fix IMA testRoberto Sassu
[ Upstream commit 12fabae03ca6474fd571bf6ddb37d009533305d6 ] Commit 62622dab0a28 ("ima: return IMA digest value only when IMA_COLLECTED flag is set") caused bpf_ima_inode_hash() to refuse to give non-fresh digests. IMA test #3 assumed the old behavior, that bpf_ima_inode_hash() still returned also non-fresh digests. Correct the test by accepting both cases. If the samples returned are 1, assume that the commit above is applied and that the returned digest is fresh. If the samples returned are 2, assume that the commit above is not applied, and check both the non-fresh and fresh digest. Fixes: 62622dab0a28 ("ima: return IMA digest value only when IMA_COLLECTED flag is set") Reported-by: David Vernet <void@manifault.com> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Matt Bobrowski <mattbobrowski@google.com> Link: https://lore.kernel.org/bpf/20230308103713.1681200-1-roberto.sassu@huaweicloud.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/clone3: fix number of tests in ksft_set_planTobias Klauser
[ Upstream commit d95debbdc528d50042807754d6085c15abc21768 ] Commit 515bddf0ec41 ("selftests/clone3: test clone3 with CLONE_NEWTIME") added an additional test, so the number passed to ksft_set_plan needs to be bumped accordingly. Also use ksft_finished() to print results and exit. This will catch future mismatches between ksft_set_plan() and the number of tests being run. Fixes: 515bddf0ec41 ("selftests/clone3: test clone3 with CLONE_NEWTIME") Cc: Christian Brauner <brauner@kernel.org> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/resctrl: Check for return value after write_schemata()Ilpo Järvinen
[ Upstream commit 0d45c83b95da414e98ad333e723141a94f6e2c64 ] MBA test case writes schemata but it does not check if the write is successful or not. Add the error check and return error properly. Fixes: 01fee6b4d1f9 ("selftests/resctrl: Add MBA test") Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/resctrl: Allow ->setup() to return errorsIlpo Järvinen
[ Upstream commit fa10366cc6f4cc862871f8938426d85c2481f084 ] resctrl_val() assumes ->setup() always returns either 0 to continue tests or < 0 in case of the normal termination of tests after x runs. The latter overlaps with normal error returns. Define END_OF_TESTS (=1) to differentiate the normal termination of tests and return errors as negative values. Alter callers of ->setup() to handle errors properly. Fixes: 790bf585b0ee ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest") Fixes: ecdbb911f22d ("selftests/resctrl: Add MBM test") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/resctrl: Move ->setup() call outside of test specific branchesIlpo Järvinen
[ Upstream commit c90b3b588e369c20087699316259fa5ebbb16f2d ] resctrl_val() function is called only by MBM, MBA, and CMT tests which means the else branch is never used. Both test branches call param->setup(). Remove the unused else branch and place the ->setup() call outside of the test specific branches reducing code duplication. Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Stable-dep-of: fa10366cc6f4 ("selftests/resctrl: Allow ->setup() to return errors") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/resctrl: Return NULL if malloc_and_init_memory() did not alloc memIlpo Järvinen
[ Upstream commit 22a8be280383812235131dda18a8212a59fadd2d ] malloc_and_init_memory() in fill_buf isn't checking if memalign() successfully allocated memory or not before accessing the memory. Check the return value of memalign() and return NULL if allocating aligned memory fails. Fixes: a2561b12fe39 ("selftests/resctrl: Add built in benchmark") Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-13selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new argJesper Dangaard Brouer
Update BPF selftests to use the new RSS type argument for kfunc bpf_xdp_metadata_rx_hash. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/168132894068.340624.8914711185697163690.stgit@firesoul Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-13selftests/bpf: xdp_hw_metadata remove bpf_printk and add countersJesper Dangaard Brouer
The tool xdp_hw_metadata can be used by driver developers implementing XDP-hints metadata kfuncs. Remove all bpf_printk calls, as the tool already transfers all the XDP-hints related information via metadata area to AF_XDP userspace process. Add counters for providing remaining information about failure and skipped packet events. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/168132891533.340624.7313781245316405141.stgit@firesoul Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-13selftests: add the missing CONFIG_IP_SCTP in net configXin Long
The selftest sctp_vrf needs CONFIG_IP_SCTP set in config when building the kernel, so add it. Fixes: a61bd7b9fef3 ("selftests: add a selftest for sctp vrf") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://lore.kernel.org/r/61dddebc4d2dd98fe7fb145e24d4b2430e42b572.1681312386.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13selftests: openvswitch: adjust datapath NL message declarationAaron Conole
The netlink message for creating a new datapath takes an array of ports for the PID creation. This shouldn't cause much issue but correct it for future cases where we need to do decode of datapath information that could include the per-cpu PID map. Fixes: 25f16c873fb1 ("selftests: add openvswitch selftest suite") Signed-off-by: Aaron Conole <aconole@redhat.com> Link: https://lore.kernel.org/r/20230412115828.3991806-1-aconole@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13selftests: mptcp: userspace pm: uniform verify eventsMatthieu Baerts
Simply adding a "sleep" before checking something is usually not a good idea because the time that has been picked can not be enough or too much. The best is to wait for events with a timeout. In this selftest, 'sleep 0.5' is used more than 40 times. It is always used before calling a 'verify_*' function except for this verify_listener_events which has been added later. At the end, using all these 'sleep 0.5' seems to work: the slow CIs don't complain so far. Also because it doesn't take too much time, we can just add two more 'sleep 0.5' to uniform what is done before calling a 'verify_*' function. For the same reasons, we can also delay a bigger refactoring to replace all these 'sleep 0.5' by functions waiting for events instead of waiting for a fix time and hope for the best. Fixes: 6c73008aa301 ("selftests: mptcp: listener test for userspace PM") Cc: stable@vger.kernel.org Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-07Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-04-08 We've added 4 non-merge commits during the last 11 day(s) which contain a total of 5 files changed, 39 insertions(+), 6 deletions(-). The main changes are: 1) Fix BPF TCP socket iterator to use correct helper for dropping socket's refcount, that is, sock_gen_put instead of sock_put, from Martin KaFai Lau. 2) Fix a BTI exception splat in BPF trampoline-generated code on arm64, from Xu Kuohai. 3) Fix a LongArch JIT error from missing BPF_NOSPEC no-op, from George Guo. 4) Fix dynamic XDP feature detection of veth in xdp_redirect selftest, from Lorenzo Bianconi. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: fix xdp_redirect xdp-features selftest for veth driver bpf, arm64: Fixed a BTI error on returning to patched function LoongArch, bpf: Fix jit to skip speculation barrier opcode bpf: tcp: Use sock_gen_put instead of sock_put in bpf_iter_tcp ==================== Link: https://lore.kernel.org/r/20230407224642.30906-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-07selftests: bonding: add arp validate testHangbin Liu
This patch add bonding arp validate tests with mode active backup, monitor arp_ip_target and ns_ip6_target. It also checks mii_status to make sure all slaves are UP. Acked-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-07selftests: bonding: re-format bond option testsHangbin Liu
To improve the testing process for bond options, A new bond topology lib is added to our testing setup. The current option_prio.sh file will be renamed to bond_options.sh so that all bonding options can be tested here. Specifically, for priority testing, we will run all tests using modes 1, 5, and 6. These changes will help us streamline the testing process and ensure that our bond options are rigorously evaluated. Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-06Merge tag 'net-6.3-rc6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and can. Current release - regressions: - wifi: mac80211: - fix potential null pointer dereference - fix receiving mesh packets in forwarding=0 networks - fix mesh forwarding Current release - new code bugs: - virtio/vsock: fix leaks due to missing skb owner Previous releases - regressions: - raw: fix NULL deref in raw_get_next(). - sctp: check send stream number after wait_for_sndbuf - qrtr: - fix a refcount bug in qrtr_recvmsg() - do not do DEL_SERVER broadcast after DEL_CLIENT - wifi: brcmfmac: fix SDIO suspend/resume regression - wifi: mt76: fix use-after-free in fw features query. - can: fix race between isotp_sendsmg() and isotp_release() - eth: mtk_eth_soc: fix remaining throughput regression - eth: ice: reset FDIR counter in FDIR init stage Previous releases - always broken: - core: don't let netpoll invoke NAPI if in xmit context - icmp: guard against too small mtu - ipv6: fix an uninit variable access bug in __ip6_make_skb() - wifi: mac80211: fix the size calculation of ieee80211_ie_len_eht_cap() - can: fix poll() to not report false EPOLLOUT events - eth: gve: secure enough bytes in the first TX desc for all TCP pkts" * tag 'net-6.3-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits) net: stmmac: check fwnode for phy device before scanning for phy net: stmmac: Add queue reset into stmmac_xdp_open() function selftests: net: rps_default_mask.sh: delete veth link specifically net: fec: make use of MDIO C45 quirk can: isotp: fix race between isotp_sendsmg() and isotp_release() can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infos can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory access gve: Secure enough bytes in the first TX desc for all TCP pkts netlink: annotate lockless accesses to nlk->max_recvmsg_len ethtool: reset #lanes when lanes is omitted ping: Fix potentail NULL deref for /proc/net/icmp. raw: Fix NULL deref in raw_get_next(). ice: Reset FDIR counter in FDIR init stage ice: fix wrong fallback logic for FDIR net: stmmac: fix up RX flow hash indirection table when setting channels net: ethernet: ti: am65-cpsw: Fix mdio cleanup in probe wifi: mt76: ignore key disable commands wifi: ath11k: reduce the MHI timeout to 20s ipv6: Fix an uninit variable access bug in __ip6_make_skb() ...
2023-04-06Merge tag 'linux-kselftest-fixes-6.3-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "One single fix to mount_setattr_test build failure" * tag 'linux-kselftest-fixes-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests mount: Fix mount_setattr_test builds failed
2023-04-06selftests/bpf: fix xdp_redirect xdp-features selftest for veth driverLorenzo Bianconi
xdp-features supported by veth driver are no more static, but they depends on veth configuration (e.g. if GRO is enabled/disabled or TX/RX queue configuration). Take it into account in xdp_redirect xdp-features selftest for veth driver. Fixes: fccca038f300 ("veth: take into account device reconfiguration for xdp_features flag") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/bc35455cfbb1d4f7f52536955ded81ad47d8dc54.1680777371.git.lorenzo@kernel.org Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-04-05selftests: net: rps_default_mask.sh: delete veth link specificallyHangbin Liu
When deleting the netns and recreating a new one while re-adding the veth interface, there is a small window of time during which the old veth interface has not yet been removed. This can cause the new addition to fail. To resolve this issue, we can either wait for a short while to ensure that the old veth interface is deleted, or we can specifically remove the veth interface. Before this patch: # ./rps_default_mask.sh empty rps_default_mask [ ok ] changing rps_default_mask dont affect existing devices [ ok ] changing rps_default_mask dont affect existing netns [ ok ] changing rps_default_mask affect newly created devices [ ok ] changing rps_default_mask don't affect newly child netns[II][ ok ] rps_default_mask is 0 by default in child netns [ ok ] RTNETLINK answers: File exists changing rps_default_mask in child ns don't affect the main one[ ok ] cat: /sys/class/net/vethC11an1/queues/rx-0/rps_cpus: No such file or directory changing rps_default_mask in child ns affects new childns devices./rps_default_mask.sh: line 36: [: -eq: unary operator expected [fail] expected 1 found changing rps_default_mask in child ns don't affect existing devices[ ok ] After this patch: # ./rps_default_mask.sh empty rps_default_mask [ ok ] changing rps_default_mask dont affect existing devices [ ok ] changing rps_default_mask dont affect existing netns [ ok ] changing rps_default_mask affect newly created devices [ ok ] changing rps_default_mask don't affect newly child netns[II][ ok ] rps_default_mask is 0 by default in child netns [ ok ] changing rps_default_mask in child ns don't affect the main one[ ok ] changing rps_default_mask in child ns affects new childns devices[ ok ] changing rps_default_mask in child ns don't affect existing devices[ ok ] Fixes: 3a7d84eae03b ("self-tests: more rps self tests") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20230404072411.879476-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-31selftests mount: Fix mount_setattr_test builds failedAnh Tuan Phan
When compiling selftests with target mount_setattr I encountered some errors with the below messages: mount_setattr_test.c: In function ‘mount_setattr_thread’: mount_setattr_test.c:343:16: error: variable ‘attr’ has initializer but incomplete type 343 | struct mount_attr attr = { | ^~~~~~~~~~ These errors might be because of linux/mount.h is not included. This patch resolves that issue. Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-01-24 11:00:31 +0000