From 9ab7a709c926c16b4433cf02d04fcbcf35aaab2b Mon Sep 17 00:00:00 2001 From: Shravya KN Date: Mon, 28 Apr 2025 15:58:56 -0700 Subject: bnxt_en: Fix error handling path in bnxt_init_chip() WARN_ON() is triggered in __flush_work() if bnxt_init_chip() fails because we call cancel_work_sync() on dim work that has not been initialized. WARNING: CPU: 37 PID: 5223 at kernel/workqueue.c:4201 __flush_work.isra.0+0x212/0x230 The driver relies on the BNXT_STATE_NAPI_DISABLED bit to check if dim work has already been cancelled. But in the bnxt_open() path, BNXT_STATE_NAPI_DISABLED is not set and this causes the error path to think that it needs to cancel the uninitalized dim work. Fix it by setting BNXT_STATE_NAPI_DISABLED during initialization. The bit will be cleared when we enable NAPI and initialize dim work. Fixes: 40452969a506 ("bnxt_en: Fix DIM shutdown") Suggested-by: Somnath Kotur Reviewed-by: Somnath Kotur Signed-off-by: Shravya KN Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 2c8e2c19d854..c4bccc683597 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -11602,6 +11602,9 @@ static void bnxt_init_napi(struct bnxt *bp) poll_fn = bnxt_poll_p5; else if (BNXT_CHIP_TYPE_NITRO_A0(bp)) cp_nr_rings--; + + set_bit(BNXT_STATE_NAPI_DISABLED, &bp->state); + for (i = 0; i < cp_nr_rings; i++) { bnapi = bp->bnapi[i]; netif_napi_add_config_locked(bp->dev, &bnapi->napi, poll_fn, -- cgit v1.2.3 From 8e6cc9045380f3f0c48ebda2bda5e1abe263388d Mon Sep 17 00:00:00 2001 From: Kalesh AP Date: Mon, 28 Apr 2025 15:58:57 -0700 Subject: bnxt_en: Fix ethtool selftest output in one of the failure cases When RDMA driver is loaded, running offline self test is not supported and driver returns failure early. But it is not clearing the input buffer and hence the application prints some junk characters for individual test results. Fix it by clearing the buffer before returning. Fixes: 895621f1c816 ("bnxt_en: Don't support offline self test when RoCE driver is loaded") Reviewed-by: Somnath Kotur Signed-off-by: Kalesh AP Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index 48dd5922e4dd..7be37976f3e4 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -4991,6 +4991,7 @@ static void bnxt_self_test(struct net_device *dev, struct ethtool_test *etest, if (!bp->num_tests || !BNXT_PF(bp)) return; + memset(buf, 0, sizeof(u64) * bp->num_tests); if (etest->flags & ETH_TEST_FL_OFFLINE && bnxt_ulp_registered(bp->edev)) { etest->flags |= ETH_TEST_FL_FAILED; @@ -4998,7 +4999,6 @@ static void bnxt_self_test(struct net_device *dev, struct ethtool_test *etest, return; } - memset(buf, 0, sizeof(u64) * bp->num_tests); if (!netif_running(dev)) { etest->flags |= ETH_TEST_FL_FAILED; return; -- cgit v1.2.3 From a63db07e4ecd45b027718168faf7d798bb47bf58 Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Mon, 28 Apr 2025 15:58:58 -0700 Subject: bnxt_en: Add missing skb_mark_for_recycle() in bnxt_rx_vlan() If bnxt_rx_vlan() fails because the VLAN protocol ID is invalid, the SKB is freed but we're missing the call to recycle it. This may cause the warning: "page_pool_release_retry() stalled pool shutdown" Add the missing skb_mark_for_recycle() in bnxt_rx_vlan(). Fixes: 86b05508f775 ("bnxt_en: Use the unified RX page pool buffers for XDP and non-XDP") Reviewed-by: Kalesh AP Reviewed-by: Pavan Chebbi Signed-off-by: Somnath Kotur Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index c4bccc683597..cfc9ccab39bf 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -2015,6 +2015,7 @@ static struct sk_buff *bnxt_rx_vlan(struct sk_buff *skb, u8 cmp_type, } return skb; vlan_err: + skb_mark_for_recycle(skb); dev_kfree_skb(skb); return NULL; } -- cgit v1.2.3 From 1ae04e489dd757e1e61999362f33e7c554c3b9e3 Mon Sep 17 00:00:00 2001 From: Kashyap Desai Date: Mon, 28 Apr 2025 15:58:59 -0700 Subject: bnxt_en: call pci_alloc_irq_vectors() after bnxt_reserve_rings() On some architectures (e.g. ARM), calling pci_alloc_irq_vectors() will immediately cause the MSIX table to be written. This will not work if we haven't called bnxt_reserve_rings() to properly map the MSIX table to the MSIX vectors reserved by FW. Fix the FW error recovery path to delay the bnxt_init_int_mode() -> pci_alloc_irq_vectors() call by removing it from bnxt_hwrm_if_change(). bnxt_request_irq() later in the code path will call it and by then the MSIX table is properly mapped. Fixes: 4343838ca5eb ("bnxt_en: Replace deprecated PCI MSIX APIs") Suggested-by: Michael Chan Signed-off-by: Kashyap Desai Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index cfc9ccab39bf..3b2ea36f25a2 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -12399,13 +12399,8 @@ static int bnxt_hwrm_if_change(struct bnxt *bp, bool up) set_bit(BNXT_STATE_ABORT_ERR, &bp->state); return rc; } + /* IRQ will be initialized later in bnxt_request_irq()*/ bnxt_clear_int_mode(bp); - rc = bnxt_init_int_mode(bp); - if (rc) { - clear_bit(BNXT_STATE_FW_RESET_DET, &bp->state); - netdev_err(bp->dev, "init int mode failed\n"); - return rc; - } } rc = bnxt_cancel_reservations(bp, fw_reset); } -- cgit v1.2.3 From c2d20a3814d1b57dea6db82229edd702bde9c878 Mon Sep 17 00:00:00 2001 From: Kashyap Desai Date: Mon, 28 Apr 2025 15:59:00 -0700 Subject: bnxt_en: delay pci_alloc_irq_vectors() in the AER path This patch is similar to the last patch to delay the pci_alloc_irq_vectors() call in the AER path until after calling bnxt_reserve_rings(). bnxt_reserve_rings() needs to properly map the MSIX table first before we call pci_alloc_irq_vectors() which may immediately write to the MSIX table in some architectures. Move the bnxt_init_int_mode() call from bnxt_io_slot_reset() to bnxt_io_resume() after calling bnxt_reserve_rings(). With this change, the AER path may call bnxt_open() -> bnxt_hwrm_if_change() with bp->irq_tbl set to NULL. bp->irq_tbl is cleared when we call bnxt_clear_int_mode() in bnxt_io_slot_reset(). So we cannot use !bp->irq_tbl to detect aborted FW reset. Add a new BNXT_FW_RESET_STATE_ABORT to detect aborted FW reset in bnxt_hwrm_if_change(). Signed-off-by: Kashyap Desai Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 17 +++++++++++------ drivers/net/ethernet/broadcom/bnxt/bnxt.h | 1 + 2 files changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 3b2ea36f25a2..78e496b0ec26 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -12325,12 +12325,15 @@ static int bnxt_hwrm_if_change(struct bnxt *bp, bool up) { struct hwrm_func_drv_if_change_output *resp; struct hwrm_func_drv_if_change_input *req; - bool fw_reset = !bp->irq_tbl; bool resc_reinit = false; bool caps_change = false; int rc, retry = 0; + bool fw_reset; u32 flags = 0; + fw_reset = (bp->fw_reset_state == BNXT_FW_RESET_STATE_ABORT); + bp->fw_reset_state = 0; + if (!(bp->fw_cap & BNXT_FW_CAP_IF_CHANGE)) return 0; @@ -14833,7 +14836,7 @@ static void bnxt_fw_reset_abort(struct bnxt *bp, int rc) clear_bit(BNXT_STATE_IN_FW_RESET, &bp->state); if (bp->fw_reset_state != BNXT_FW_RESET_STATE_POLL_VF) bnxt_dl_health_fw_status_update(bp, false); - bp->fw_reset_state = 0; + bp->fw_reset_state = BNXT_FW_RESET_STATE_ABORT; netif_close(bp->dev); } @@ -16931,10 +16934,9 @@ static pci_ers_result_t bnxt_io_slot_reset(struct pci_dev *pdev) if (!err) result = PCI_ERS_RESULT_RECOVERED; + /* IRQ will be initialized later in bnxt_io_resume */ bnxt_ulp_irq_stop(bp); bnxt_clear_int_mode(bp); - err = bnxt_init_int_mode(bp); - bnxt_ulp_irq_restart(bp, err); } reset_exit: @@ -16963,10 +16965,13 @@ static void bnxt_io_resume(struct pci_dev *pdev) err = bnxt_hwrm_func_qcaps(bp); if (!err) { - if (netif_running(netdev)) + if (netif_running(netdev)) { err = bnxt_open(netdev); - else + } else { err = bnxt_reserve_rings(bp, true); + if (!err) + err = bnxt_init_int_mode(bp); + } } if (!err) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index 21726cf56586..bc8b3b7e915d 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -2614,6 +2614,7 @@ struct bnxt { #define BNXT_FW_RESET_STATE_POLL_FW 4 #define BNXT_FW_RESET_STATE_OPENING 5 #define BNXT_FW_RESET_STATE_POLL_FW_DOWN 6 +#define BNXT_FW_RESET_STATE_ABORT 7 u16 fw_reset_min_dsecs; #define BNXT_DFLT_FW_RST_MIN_DSECS 20 -- cgit v1.2.3 From ea9376cf68230e05492f22ca45d329f16e262c7b Mon Sep 17 00:00:00 2001 From: Shruti Parab Date: Mon, 28 Apr 2025 15:59:01 -0700 Subject: bnxt_en: Fix coredump logic to free allocated buffer When handling HWRM_DBG_COREDUMP_LIST FW command in bnxt_hwrm_dbg_dma_data(), the allocated buffer info->dest_buf is not freed in the error path. In the normal path, info->dest_buf is assigned to coredump->data and it will eventually be freed after the coredump is collected. Free info->dest_buf immediately inside bnxt_hwrm_dbg_dma_data() in the error path. Fixes: c74751f4c392 ("bnxt_en: Return error if FW returns more data than dump length") Reported-by: Michael Chan Reviewed-by: Kalesh AP Signed-off-by: Shruti Parab Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c index 5576e7cf8463..9a74793648f6 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c @@ -116,6 +116,11 @@ static int bnxt_hwrm_dbg_dma_data(struct bnxt *bp, void *msg, memcpy(info->dest_buf + off, dma_buf, len); } else { rc = -ENOBUFS; + if (cmn_req->req_type == + cpu_to_le16(HWRM_DBG_COREDUMP_LIST)) { + kfree(info->dest_buf); + info->dest_buf = NULL; + } break; } } -- cgit v1.2.3 From 6b87bd94f34370bbf1dfa59352bed8efab5bf419 Mon Sep 17 00:00:00 2001 From: Shruti Parab Date: Mon, 28 Apr 2025 15:59:02 -0700 Subject: bnxt_en: Fix out-of-bound memcpy() during ethtool -w When retrieving the FW coredump using ethtool, it can sometimes cause memory corruption: BUG: KFENCE: memory corruption in __bnxt_get_coredump+0x3ef/0x670 [bnxt_en] Corrupted memory at 0x000000008f0f30e8 [ ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ] (in kfence-#45): __bnxt_get_coredump+0x3ef/0x670 [bnxt_en] ethtool_get_dump_data+0xdc/0x1a0 __dev_ethtool+0xa1e/0x1af0 dev_ethtool+0xa8/0x170 dev_ioctl+0x1b5/0x580 sock_do_ioctl+0xab/0xf0 sock_ioctl+0x1ce/0x2e0 __x64_sys_ioctl+0x87/0xc0 do_syscall_64+0x5c/0xf0 entry_SYSCALL_64_after_hwframe+0x78/0x80 ... This happens when copying the coredump segment list in bnxt_hwrm_dbg_dma_data() with the HWRM_DBG_COREDUMP_LIST FW command. The info->dest_buf buffer is allocated based on the number of coredump segments returned by the FW. The segment list is then DMA'ed by the FW and the length of the DMA is returned by FW. The driver then copies this DMA'ed segment list to info->dest_buf. In some cases, this DMA length may exceed the info->dest_buf length and cause the above BUG condition. Fix it by capping the copy length to not exceed the length of info->dest_buf. The extra DMA data contains no useful information. This code path is shared for the HWRM_DBG_COREDUMP_LIST and the HWRM_DBG_COREDUMP_RETRIEVE FW commands. The buffering is different for these 2 FW commands. To simplify the logic, we need to move the line to adjust the buffer length for HWRM_DBG_COREDUMP_RETRIEVE up, so that the new check to cap the copy length will work for both commands. Fixes: c74751f4c392 ("bnxt_en: Return error if FW returns more data than dump length") Reviewed-by: Kalesh AP Signed-off-by: Shruti Parab Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c index 9a74793648f6..a000d3f630bd 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c @@ -110,10 +110,19 @@ static int bnxt_hwrm_dbg_dma_data(struct bnxt *bp, void *msg, } } + if (cmn_req->req_type == + cpu_to_le16(HWRM_DBG_COREDUMP_RETRIEVE)) + info->dest_buf_size += len; + if (info->dest_buf) { if ((info->seg_start + off + len) <= BNXT_COREDUMP_BUF_LEN(info->buf_len)) { - memcpy(info->dest_buf + off, dma_buf, len); + u16 copylen = min_t(u16, len, + info->dest_buf_size - off); + + memcpy(info->dest_buf + off, dma_buf, copylen); + if (copylen < len) + break; } else { rc = -ENOBUFS; if (cmn_req->req_type == @@ -125,10 +134,6 @@ static int bnxt_hwrm_dbg_dma_data(struct bnxt *bp, void *msg, } } - if (cmn_req->req_type == - cpu_to_le16(HWRM_DBG_COREDUMP_RETRIEVE)) - info->dest_buf_size += len; - if (!(cmn_resp->flags & HWRM_DBG_CMN_FLAGS_MORE)) break; -- cgit v1.2.3 From 02e8be5a032cae0f4ca33c6053c44d83cf4acc93 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 28 Apr 2025 15:59:03 -0700 Subject: bnxt_en: Fix ethtool -d byte order for 32-bit values For version 1 register dump that includes the PCIe stats, the existing code incorrectly assumes that all PCIe stats are 64-bit values. Fix it by using an array containing the starting and ending index of the 32-bit values. The loop in bnxt_get_regs() will use the array to do proper endian swap for the 32-bit values. Fixes: b5d600b027eb ("bnxt_en: Add support for 'ethtool -d'") Reviewed-by: Shruti Parab Reviewed-by: Kalesh AP Reviewed-by: Andy Gospodarek Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 38 +++++++++++++++++++---- 1 file changed, 32 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index 7be37976f3e4..f5d490bf997e 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -2062,6 +2062,17 @@ static int bnxt_get_regs_len(struct net_device *dev) return reg_len; } +#define BNXT_PCIE_32B_ENTRY(start, end) \ + { offsetof(struct pcie_ctx_hw_stats, start), \ + offsetof(struct pcie_ctx_hw_stats, end) } + +static const struct { + u16 start; + u16 end; +} bnxt_pcie_32b_entries[] = { + BNXT_PCIE_32B_ENTRY(pcie_ltssm_histogram[0], pcie_ltssm_histogram[3]), +}; + static void bnxt_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *_p) { @@ -2094,12 +2105,27 @@ static void bnxt_get_regs(struct net_device *dev, struct ethtool_regs *regs, req->pcie_stat_host_addr = cpu_to_le64(hw_pcie_stats_addr); rc = hwrm_req_send(bp, req); if (!rc) { - __le64 *src = (__le64 *)hw_pcie_stats; - u64 *dst = (u64 *)(_p + BNXT_PXP_REG_LEN); - int i; - - for (i = 0; i < sizeof(*hw_pcie_stats) / sizeof(__le64); i++) - dst[i] = le64_to_cpu(src[i]); + u8 *dst = (u8 *)(_p + BNXT_PXP_REG_LEN); + u8 *src = (u8 *)hw_pcie_stats; + int i, j; + + for (i = 0, j = 0; i < sizeof(*hw_pcie_stats); ) { + if (i >= bnxt_pcie_32b_entries[j].start && + i <= bnxt_pcie_32b_entries[j].end) { + u32 *dst32 = (u32 *)(dst + i); + + *dst32 = le32_to_cpu(*(__le32 *)(src + i)); + i += 4; + if (i > bnxt_pcie_32b_entries[j].end && + j < ARRAY_SIZE(bnxt_pcie_32b_entries) - 1) + j++; + } else { + u64 *dst64 = (u64 *)(dst + i); + + *dst64 = le64_to_cpu(*(__le64 *)(src + i)); + i += 8; + } + } } hwrm_req_drop(bp, req); } -- cgit v1.2.3