From c2eead0503b1409bc6954b20585f2213b7e0552d Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 10 Apr 2018 08:47:34 -0500 Subject: sparc/PCI: Request legacy VGA framebuffer only for VGA devices Previously we unconditionally requested the legacy VGA framebuffer (bus address 0xa0000-0xbffff) before we even know what PCI devices are present, in these paths: pci_fire_pbm_init, schizo_pbm_init, pci_sun4v_pbm_init, psycho_pbm_init_common pci_determine_mem_io_space pci_register_legacy_regions p->start = mem_res->start + 0xa0000 request_resource(mem_res, p) # claim VGA framebuffer pci_scan_one_pbm pci_of_scan_bus # scan DT for PCI devices pci_claim_bus_resources # claim PCI device BARs If we found a PCI device with a BAR or bridge window that overlapped the framebuffer area, we complained about not being able to claim the BAR, e.g., pci 0000:00:01.0: can't claim BAR 8 [mem 0x1ff00000000-0x1ffbfffffff]: address conflict with Video RAM area [??? 0x1ff000a0000-0x1ff000bffff flags 0x80000000] pci 0000:02:01.0: can't claim BAR 8 [mem 0x1ff00100000-0x1ff028fffff]: no compatible bridge window pci 0000:03:0f.0: can't claim BAR 8 [mem 0x1ff00100000-0x1ff028fffff]: no compatible bridge window pci 0000:04:04.0: can't claim BAR 1 [mem 0x1ff02808000-0x1ff02808fff]: no compatible bridge window This may make the conflicting device unusable because we try not to enable devices that have unassigned or conflicting BARs, e.g., qla1280 0000:04:04.0: can't ioremap BAR 1: [mem size 0x00001000] qla1280: Unable to map I/O memory If there is no VGA device in the same PCI segment, there's no reason to reserve the framebuffer and there's no conflict. If there *is* a VGA device in the same segment, both the VGA device and the device with an overlapping BAR may respond to the framebuffer addresses, which may cause bus errors. Request the legacy framebuffer area only when we actually find a VGA device. The fact that VGA devices use the legacy framebuffer even though it's not reported in a BAR is not sparc-specific, so the reservation of that area could be made more generic in the PCI core eventually. Note that on some systems, e.g., Blade 100, we still report a conflict between an ISA bridge (00:07.0) and a VGA device (00:13.0): pci_bus 0000:00: root bus resource [mem 0x1ff00000000-0x1ffffffffff] (bus address [0x00000000-0xffffffff]) pci 0000:00:07.0: reg 0x14: [mem 0x1ff00000000-0x1ff000fffff] pci 0000:00:13.0: can't claim VGA legacy [mem 0x1ff000a0000-0x1ff000bffff]: address conflict with 0000:00:07.0 [mem 0x1ff00000000-0x1ff000fffff] This is probably harmless, but if the VGA device and something behind the ISA bridge both responded to reads of the framebuffer, it would cause a bus error. Link: https://lkml.kernel.org/r/alpine.LRH.2.21.1804112323170.25495@math.ut.ee Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117191#c35 Reported-by: Meelis Roos Signed-off-by: Bjorn Helgaas --- arch/sparc/kernel/pci_common.c | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'arch/sparc/kernel/pci_common.c') diff --git a/arch/sparc/kernel/pci_common.c b/arch/sparc/kernel/pci_common.c index 38d46bcc8634..9bb6a192ef3f 100644 --- a/arch/sparc/kernel/pci_common.c +++ b/arch/sparc/kernel/pci_common.c @@ -329,23 +329,6 @@ void pci_get_pbm_props(struct pci_pbm_info *pbm) } } -static void pci_register_legacy_regions(struct resource *io_res, - struct resource *mem_res) -{ - struct resource *p; - - /* VGA Video RAM. */ - p = kzalloc(sizeof(*p), GFP_KERNEL); - if (!p) - return; - - p->name = "Video RAM area"; - p->start = mem_res->start + 0xa0000UL; - p->end = p->start + 0x1ffffUL; - p->flags = IORESOURCE_BUSY; - request_resource(mem_res, p); -} - static void pci_register_iommu_region(struct pci_pbm_info *pbm) { const u32 *vdma = of_get_property(pbm->op->dev.of_node, "virtual-dma", @@ -487,8 +470,6 @@ void pci_determine_mem_io_space(struct pci_pbm_info *pbm) if (pbm->mem64_space.flags) request_resource(&iomem_resource, &pbm->mem64_space); - pci_register_legacy_regions(&pbm->io_space, - &pbm->mem_space); pci_register_iommu_region(pbm); } -- cgit v1.2.3 From adedc05e938fada9c39c89bdea80217355fce6e8 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Sat, 21 Apr 2018 14:35:42 -0500 Subject: sparc/PCI: Use dev_printk() when possible Use the pci_info() and pci_err() wrappers for dev_printk() when possible. Log PCI device vendor and device IDs and BAR information in the same format used by other architectures. Signed-off-by: Bjorn Helgaas --- arch/sparc/kernel/leon_pci.c | 4 +- arch/sparc/kernel/pci.c | 94 ++++++++++++++++++++---------------------- arch/sparc/kernel/pci_common.c | 12 +++--- arch/sparc/kernel/pci_msi.c | 10 ++--- arch/sparc/kernel/pcic.c | 29 +++++++------ 5 files changed, 70 insertions(+), 79 deletions(-) (limited to 'arch/sparc/kernel/pci_common.c') diff --git a/arch/sparc/kernel/leon_pci.c b/arch/sparc/kernel/leon_pci.c index c2a5033b07c3..e5e5ff6b9a5c 100644 --- a/arch/sparc/kernel/leon_pci.c +++ b/arch/sparc/kernel/leon_pci.c @@ -82,9 +82,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) } if (cmd != oldcmd) { - printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n", - pci_name(dev), cmd); - /* Enable the appropriate bits in the PCI command register. */ + pci_info(dev, "enabling device (%04x -> %04x)\n", oldcmd, cmd); pci_write_config_word(dev, PCI_COMMAND, cmd); } return 0; diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index 8a04983cf8a1..17ea16a1337c 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -214,8 +214,8 @@ static void pci_parse_of_addrs(struct platform_device *op, if (!addrs) return; if (ofpci_verbose) - printk(" parse addresses (%d bytes) @ %p\n", - proplen, addrs); + pci_info(dev, " parse addresses (%d bytes) @ %p\n", + proplen, addrs); op_res = &op->resource[0]; for (; proplen >= 20; proplen -= 20, addrs += 5, op_res++) { struct resource *res; @@ -227,8 +227,8 @@ static void pci_parse_of_addrs(struct platform_device *op, continue; i = addrs[0] & 0xff; if (ofpci_verbose) - printk(" start: %llx, end: %llx, i: %x\n", - op_res->start, op_res->end, i); + pci_info(dev, " start: %llx, end: %llx, i: %x\n", + op_res->start, op_res->end, i); if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; @@ -236,13 +236,15 @@ static void pci_parse_of_addrs(struct platform_device *op, res = &dev->resource[PCI_ROM_RESOURCE]; flags |= IORESOURCE_READONLY | IORESOURCE_SIZEALIGN; } else { - printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); + pci_err(dev, "bad cfg reg num 0x%x\n", i); continue; } res->start = op_res->start; res->end = op_res->end; res->flags = flags; res->name = pci_name(dev); + + pci_info(dev, "reg 0x%x: %pR\n", i, res); } } @@ -289,8 +291,8 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, type = ""; if (ofpci_verbose) - printk(" create device, devfn: %x, type: %s\n", - devfn, type); + pci_info(bus," create device, devfn: %x, type: %s\n", + devfn, type); dev->sysdata = node; dev->dev.parent = bus->bridge; @@ -323,10 +325,6 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus), dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); - if (ofpci_verbose) - printk(" class: 0x%x device name: %s\n", - dev->class, pci_name(dev)); - /* I have seen IDE devices which will not respond to * the bmdma simplex check reads if bus mastering is * disabled. @@ -353,10 +351,13 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, dev->irq = PCI_IRQ_NONE; } + pci_info(dev, "[%04x:%04x] type %02x class %#08x\n", + dev->vendor, dev->device, dev->hdr_type, dev->class); + pci_parse_of_addrs(sd->op, node, dev); if (ofpci_verbose) - printk(" adding to system ...\n"); + pci_info(dev, " adding to system ...\n"); pci_device_add(dev, bus); @@ -430,19 +431,19 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm, u64 size; if (ofpci_verbose) - printk("of_scan_pci_bridge(%s)\n", node->full_name); + pci_info(dev, "of_scan_pci_bridge(%s)\n", node->full_name); /* parse bus-range property */ busrange = of_get_property(node, "bus-range", &len); if (busrange == NULL || len != 8) { - printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n", + pci_info(dev, "Can't get bus-range for PCI-PCI bridge %s\n", node->full_name); return; } if (ofpci_verbose) - printk(" Bridge bus range [%u --> %u]\n", - busrange[0], busrange[1]); + pci_info(dev, " Bridge bus range [%u --> %u]\n", + busrange[0], busrange[1]); ranges = of_get_property(node, "ranges", &len); simba = 0; @@ -454,8 +455,8 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm, bus = pci_add_new_bus(dev->bus, dev, busrange[0]); if (!bus) { - printk(KERN_ERR "Failed to create pci bus for %s\n", - node->full_name); + pci_err(dev, "Failed to create pci bus for %s\n", + node->full_name); return; } @@ -464,8 +465,8 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm, bus->bridge_ctl = 0; if (ofpci_verbose) - printk(" Bridge ranges[%p] simba[%d]\n", - ranges, simba); + pci_info(dev, " Bridge ranges[%p] simba[%d]\n", + ranges, simba); /* parse ranges property, or cook one up by hand for Simba */ /* PCI #address-cells == 3 and #size-cells == 2 always */ @@ -487,10 +488,10 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm, u64 start; if (ofpci_verbose) - printk(" RAW Range[%08x:%08x:%08x:%08x:%08x:%08x:" - "%08x:%08x]\n", - ranges[0], ranges[1], ranges[2], ranges[3], - ranges[4], ranges[5], ranges[6], ranges[7]); + pci_info(dev, " RAW Range[%08x:%08x:%08x:%08x:%08x:%08x:" + "%08x:%08x]\n", + ranges[0], ranges[1], ranges[2], ranges[3], + ranges[4], ranges[5], ranges[6], ranges[7]); flags = pci_parse_of_flags(ranges[0]); size = GET_64BIT(ranges, 6); @@ -510,14 +511,14 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm, if (flags & IORESOURCE_IO) { res = bus->resource[0]; if (res->flags) { - printk(KERN_ERR "PCI: ignoring extra I/O range" - " for bridge %s\n", node->full_name); + pci_err(dev, "ignoring extra I/O range" + " for bridge %s\n", node->full_name); continue; } } else { if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { - printk(KERN_ERR "PCI: too many memory ranges" - " for bridge %s\n", node->full_name); + pci_err(dev, "too many memory ranges" + " for bridge %s\n", node->full_name); continue; } res = bus->resource[i]; @@ -529,8 +530,8 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm, region.end = region.start + size - 1; if (ofpci_verbose) - printk(" Using flags[%08x] start[%016llx] size[%016llx]\n", - flags, start, size); + pci_info(dev, " Using flags[%08x] start[%016llx] size[%016llx]\n", + flags, start, size); pcibios_bus_to_resource(dev->bus, res, ®ion); } @@ -538,7 +539,7 @@ after_ranges: sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), bus->number); if (ofpci_verbose) - printk(" bus name: %s\n", bus->name); + pci_info(dev, " bus name: %s\n", bus->name); pci_of_scan_bus(pbm, node, bus); } @@ -553,14 +554,14 @@ static void pci_of_scan_bus(struct pci_pbm_info *pbm, struct pci_dev *dev; if (ofpci_verbose) - printk("PCI: scan_bus[%s] bus no %d\n", - node->full_name, bus->number); + pci_info(bus, "scan_bus[%s] bus no %d\n", + node->full_name, bus->number); child = NULL; prev_devfn = -1; while ((child = of_get_next_child(node, child)) != NULL) { if (ofpci_verbose) - printk(" * %s\n", child->full_name); + pci_info(bus, " * %s\n", child->full_name); reg = of_get_property(child, "reg", ®len); if (reg == NULL || reglen < 20) continue; @@ -581,8 +582,7 @@ static void pci_of_scan_bus(struct pci_pbm_info *pbm, if (!dev) continue; if (ofpci_verbose) - printk("PCI: dev header type: %x\n", - dev->hdr_type); + pci_info(dev, "dev header type: %x\n", dev->hdr_type); if (pci_is_bridge(dev)) of_scan_pci_bridge(pbm, child, dev); @@ -678,12 +678,8 @@ static void pci_claim_bus_resources(struct pci_bus *bus) continue; if (ofpci_verbose) - printk("PCI: Claiming %s: " - "Resource %d: %016llx..%016llx [%x]\n", - pci_name(dev), i, - (unsigned long long)r->start, - (unsigned long long)r->end, - (unsigned int)r->flags); + pci_info(dev, "Claiming Resource %d: %pR\n", + i, r); pci_claim_resource(dev, i); } @@ -755,9 +751,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) } if (cmd != oldcmd) { - printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n", - pci_name(dev), cmd); - /* Enable the appropriate bits in the PCI command register. */ + pci_info(dev, "enabling device (%04x -> %04x)\n", oldcmd, cmd); pci_write_config_word(dev, PCI_COMMAND, cmd); } return 0; @@ -1117,8 +1111,8 @@ static void pci_bus_slot_names(struct device_node *node, struct pci_bus *bus) sp = prop->names; if (ofpci_verbose) - printk("PCI: Making slots for [%s] mask[0x%02x]\n", - node->full_name, mask); + pci_info(bus, "Making slots for [%s] mask[0x%02x]\n", + node->full_name, mask); i = 0; while (mask) { @@ -1131,12 +1125,12 @@ static void pci_bus_slot_names(struct device_node *node, struct pci_bus *bus) } if (ofpci_verbose) - printk("PCI: Making slot [%s]\n", sp); + pci_info(bus, "Making slot [%s]\n", sp); pci_slot = pci_create_slot(bus, i, sp, NULL); if (IS_ERR(pci_slot)) - printk(KERN_ERR "PCI: pci_create_slot returned %ld\n", - PTR_ERR(pci_slot)); + pci_err(bus, "pci_create_slot returned %ld\n", + PTR_ERR(pci_slot)); sp += strlen(sp) + 1; mask &= ~this_bit; diff --git a/arch/sparc/kernel/pci_common.c b/arch/sparc/kernel/pci_common.c index 9bb6a192ef3f..4759ccd542fe 100644 --- a/arch/sparc/kernel/pci_common.c +++ b/arch/sparc/kernel/pci_common.c @@ -489,8 +489,8 @@ void pci_scan_for_target_abort(struct pci_pbm_info *pbm, PCI_STATUS_REC_TARGET_ABORT)); if (error_bits) { pci_write_config_word(pdev, PCI_STATUS, error_bits); - printk("%s: Device %s saw Target Abort [%016x]\n", - pbm->name, pci_name(pdev), status); + pci_info(pdev, "%s: Device saw Target Abort [%016x]\n", + pbm->name, status); } } @@ -512,8 +512,8 @@ void pci_scan_for_master_abort(struct pci_pbm_info *pbm, (status & (PCI_STATUS_REC_MASTER_ABORT)); if (error_bits) { pci_write_config_word(pdev, PCI_STATUS, error_bits); - printk("%s: Device %s received Master Abort [%016x]\n", - pbm->name, pci_name(pdev), status); + pci_info(pdev, "%s: Device received Master Abort " + "[%016x]\n", pbm->name, status); } } @@ -536,8 +536,8 @@ void pci_scan_for_parity_error(struct pci_pbm_info *pbm, PCI_STATUS_DETECTED_PARITY)); if (error_bits) { pci_write_config_word(pdev, PCI_STATUS, error_bits); - printk("%s: Device %s saw Parity Error [%016x]\n", - pbm->name, pci_name(pdev), status); + pci_info(pdev, "%s: Device saw Parity Error [%016x]\n", + pbm->name, status); } } diff --git a/arch/sparc/kernel/pci_msi.c b/arch/sparc/kernel/pci_msi.c index 1994d7638406..fb5899cbfa51 100644 --- a/arch/sparc/kernel/pci_msi.c +++ b/arch/sparc/kernel/pci_msi.c @@ -191,8 +191,8 @@ static void sparc64_teardown_msi_irq(unsigned int irq, break; } if (i >= pbm->msi_num) { - printk(KERN_ERR "%s: teardown: No MSI for irq %u\n", - pbm->name, irq); + pci_err(pdev, "%s: teardown: No MSI for irq %u\n", pbm->name, + irq); return; } @@ -201,9 +201,9 @@ static void sparc64_teardown_msi_irq(unsigned int irq, err = ops->msi_teardown(pbm, msi_num); if (err) { - printk(KERN_ERR "%s: teardown: ops->teardown() on MSI %u, " - "irq %u, gives error %d\n", - pbm->name, msi_num, irq, err); + pci_err(pdev, "%s: teardown: ops->teardown() on MSI %u, " + "irq %u, gives error %d\n", pbm->name, msi_num, irq, + err); return; } diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index 7b137e07e0a4..ee4c9a9a171c 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -518,10 +518,10 @@ static void pcic_map_pci_device(struct linux_pcic *pcic, * board in a PCI slot. We must remap it * under 64K but it is not done yet. XXX */ - printk("PCIC: Skipping I/O space at 0x%lx, " - "this will Oops if a driver attaches " - "device '%s' at %02x:%02x)\n", address, - namebuf, dev->bus->number, dev->devfn); + pci_info(dev, "PCIC: Skipping I/O space at " + "0x%lx, this will Oops if a driver " + "attaches device '%s'\n", address, + namebuf); } } } @@ -551,8 +551,8 @@ pcic_fill_irq(struct linux_pcic *pcic, struct pci_dev *dev, int node) p++; } if (i >= pcic->pcic_imdim) { - printk("PCIC: device %s devfn %02x:%02x not found in %d\n", - namebuf, dev->bus->number, dev->devfn, pcic->pcic_imdim); + pci_info(dev, "PCIC: device %s not found in %d\n", namebuf, + pcic->pcic_imdim); dev->irq = 0; return; } @@ -565,7 +565,7 @@ pcic_fill_irq(struct linux_pcic *pcic, struct pci_dev *dev, int node) ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_HI); real_irq = ivec >> ((i-4) << 2) & 0xF; } else { /* Corrupted map */ - printk("PCIC: BAD PIN %d\n", i); for (;;) {} + pci_info(dev, "PCIC: BAD PIN %d\n", i); for (;;) {} } /* P3 */ /* printk("PCIC: device %s pin %d ivec 0x%x irq %x\n", namebuf, i, ivec, dev->irq); */ @@ -574,10 +574,10 @@ pcic_fill_irq(struct linux_pcic *pcic, struct pci_dev *dev, int node) */ if (real_irq == 0 || p->force) { if (p->irq == 0 || p->irq >= 15) { /* Corrupted map */ - printk("PCIC: BAD IRQ %d\n", p->irq); for (;;) {} + pci_info(dev, "PCIC: BAD IRQ %d\n", p->irq); for (;;) {} } - printk("PCIC: setting irq %d at pin %d for device %02x:%02x\n", - p->irq, p->pin, dev->bus->number, dev->devfn); + pci_info(dev, "PCIC: setting irq %d at pin %d\n", p->irq, + p->pin); real_irq = p->irq; i = p->pin; @@ -608,7 +608,7 @@ void pcibios_fixup_bus(struct pci_bus *bus) struct pcidev_cookie *pcp; if (!pcic0_up) { - printk("pcibios_fixup_bus: no PCIC\n"); + pci_info(bus, "pcibios_fixup_bus: no PCIC\n"); return; } pcic = &pcic0; @@ -617,7 +617,8 @@ void pcibios_fixup_bus(struct pci_bus *bus) * Next crud is an equivalent of pbm = pcic_bus_to_pbm(bus); */ if (bus->number != 0) { - printk("pcibios_fixup_bus: nonzero bus 0x%x\n", bus->number); + pci_info(bus, "pcibios_fixup_bus: nonzero bus 0x%x\n", + bus->number); return; } @@ -662,9 +663,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) } if (cmd != oldcmd) { - printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n", - pci_name(dev), cmd); - /* Enable the appropriate bits in the PCI command register. */ + pci_info(dev, "enabling device (%04x -> %04x)\n", oldcmd, cmd); pci_write_config_word(dev, PCI_COMMAND, cmd); } return 0; -- cgit v1.2.3