From 915a0c20879af9eed84f9f206f2e2fc81a115d14 Mon Sep 17 00:00:00 2001 From: Kai Germaschewski Date: Sun, 10 Feb 2002 18:04:27 +0100 Subject: Remove duplicate CONFIG_SOUND help entries and put one into drivers/sound/Config.help --- arch/alpha/Config.help | 28 ---------------------------- arch/arm/Config.help | 28 ---------------------------- arch/cris/Config.help | 28 ---------------------------- arch/i386/Config.help | 28 ---------------------------- arch/ia64/Config.help | 28 ---------------------------- arch/m68k/Config.help | 28 ---------------------------- arch/mips/Config.help | 28 ---------------------------- arch/mips64/Config.help | 28 ---------------------------- arch/parisc/Config.help | 28 ---------------------------- arch/ppc/Config.help | 28 ---------------------------- arch/sh/Config.help | 28 ---------------------------- arch/sparc64/Config.help | 28 ---------------------------- 12 files changed, 336 deletions(-) (limited to 'arch') diff --git a/arch/alpha/Config.help b/arch/alpha/Config.help index 4a5b50343ff1..7557bb560245 100644 --- a/arch/alpha/Config.help +++ b/arch/alpha/Config.help @@ -558,34 +558,6 @@ CONFIG_CD_NO_IDESCSI answer will get "defaulted" for you if you enable any of the Linux CD-ROM drivers). -CONFIG_SOUND - If you have a sound card in your computer, i.e. if it can say more - than an occasional beep, say Y. Be sure to have all the information - about your sound card and its configuration down (I/O port, - interrupt and DMA channel), because you will be asked for it. - - You want to read the Sound-HOWTO, available from - . General information about - the modular sound system is contained in the files - . The file - contains some slightly - outdated but still useful information as well. - - If you have a PnP sound card and you want to configure it at boot - time using the ISA PnP tools (read - ), then you need to - compile the sound card support as a module ( = code which can be - inserted in and removed from the running kernel whenever you want) - and load that module after the PnP configuration is finished. To do - this, say M here and read as well - as ; the module will be - called soundcore.o. - - I'm told that even without a sound card, you can make your computer - say more than an occasional beep, by programming the PC speaker. - Kernel patches and supporting utilities to do that are in the pcsp - package, available at . - CONFIG_MAGIC_SYSRQ If you say Y here, you will have some control over the system even if the system crashes for example during kernel debugging (e.g., you diff --git a/arch/arm/Config.help b/arch/arm/Config.help index ff4735b21a85..7a1381e8c22a 100644 --- a/arch/arm/Config.help +++ b/arch/arm/Config.help @@ -432,34 +432,6 @@ CONFIG_APM and read . The module will be called apm.o. -CONFIG_SOUND - If you have a sound card in your computer, i.e. if it can say more - than an occasional beep, say Y. Be sure to have all the information - about your sound card and its configuration down (I/O port, - interrupt and DMA channel), because you will be asked for it. - - You want to read the Sound-HOWTO, available from - . General information about - the modular sound system is contained in the files - . The file - contains some slightly - outdated but still useful information as well. - - If you have a PnP sound card and you want to configure it at boot - time using the ISA PnP tools (read - ), then you need to - compile the sound card support as a module ( = code which can be - inserted in and removed from the running kernel whenever you want) - and load that module after the PnP configuration is finished. To do - this, say M here and read as well - as ; the module will be - called soundcore.o. - - I'm told that even without a sound card, you can make your computer - say more than an occasional beep, by programming the PC speaker. - Kernel patches and supporting utilities to do that are in the pcsp - package, available at . - CONFIG_MAGIC_SYSRQ If you say Y here, you will have some control over the system even if the system crashes for example during kernel debugging (e.g., you diff --git a/arch/cris/Config.help b/arch/cris/Config.help index 6dc300a7013e..f8aef16d6a9f 100644 --- a/arch/cris/Config.help +++ b/arch/cris/Config.help @@ -143,34 +143,6 @@ CONFIG_CD_NO_IDESCSI answer will get "defaulted" for you if you enable any of the Linux CD-ROM drivers). -CONFIG_SOUND - If you have a sound card in your computer, i.e. if it can say more - than an occasional beep, say Y. Be sure to have all the information - about your sound card and its configuration down (I/O port, - interrupt and DMA channel), because you will be asked for it. - - You want to read the Sound-HOWTO, available from - . General information about - the modular sound system is contained in the files - . The file - contains some slightly - outdated but still useful information as well. - - If you have a PnP sound card and you want to configure it at boot - time using the ISA PnP tools (read - ), then you need to - compile the sound card support as a module ( = code which can be - inserted in and removed from the running kernel whenever you want) - and load that module after the PnP configuration is finished. To do - this, say M here and read as well - as ; the module will be - called soundcore.o. - - I'm told that even without a sound card, you can make your computer - say more than an occasional beep, by programming the PC speaker. - Kernel patches and supporting utilities to do that are in the pcsp - package, available at . - CONFIG_ISDN ISDN ("Integrated Services Digital Networks", called RNIS in France) is a special type of fully digital telephone service; it's mostly diff --git a/arch/i386/Config.help b/arch/i386/Config.help index abd88edb2efa..2c2f462e8853 100644 --- a/arch/i386/Config.help +++ b/arch/i386/Config.help @@ -861,34 +861,6 @@ CONFIG_X86_CPUID with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to /dev/cpu/31/cpuid. -CONFIG_SOUND - If you have a sound card in your computer, i.e. if it can say more - than an occasional beep, say Y. Be sure to have all the information - about your sound card and its configuration down (I/O port, - interrupt and DMA channel), because you will be asked for it. - - You want to read the Sound-HOWTO, available from - . General information about - the modular sound system is contained in the files - . The file - contains some slightly - outdated but still useful information as well. - - If you have a PnP sound card and you want to configure it at boot - time using the ISA PnP tools (read - ), then you need to - compile the sound card support as a module ( = code which can be - inserted in and removed from the running kernel whenever you want) - and load that module after the PnP configuration is finished. To do - this, say M here and read as well - as ; the module will be - called soundcore.o. - - I'm told that even without a sound card, you can make your computer - say more than an occasional beep, by programming the PC speaker. - Kernel patches and supporting utilities to do that are in the pcsp - package, available at . - CONFIG_MAGIC_SYSRQ If you say Y here, you will have some control over the system even if the system crashes for example during kernel debugging (e.g., you diff --git a/arch/ia64/Config.help b/arch/ia64/Config.help index 23ae7ec73dec..9bbf787b4a6a 100644 --- a/arch/ia64/Config.help +++ b/arch/ia64/Config.help @@ -385,34 +385,6 @@ CONFIG_ACPI_KERNEL_CONFIG If you say `Y' here, Linux's ACPI support will use the hardware-level system descriptions found on IA64 machines. -CONFIG_SOUND - If you have a sound card in your computer, i.e. if it can say more - than an occasional beep, say Y. Be sure to have all the information - about your sound card and its configuration down (I/O port, - interrupt and DMA channel), because you will be asked for it. - - You want to read the Sound-HOWTO, available from - . General information about - the modular sound system is contained in the files - . The file - contains some slightly - outdated but still useful information as well. - - If you have a PnP sound card and you want to configure it at boot - time using the ISA PnP tools (read - ), then you need to - compile the sound card support as a module ( = code which can be - inserted in and removed from the running kernel whenever you want) - and load that module after the PnP configuration is finished. To do - this, say M here and read as well - as ; the module will be - called soundcore.o. - - I'm told that even without a sound card, you can make your computer - say more than an occasional beep, by programming the PC speaker. - Kernel patches and supporting utilities to do that are in the pcsp - package, available at . - CONFIG_MAGIC_SYSRQ If you say Y here, you will have some control over the system even if the system crashes for example during kernel debugging (e.g., you diff --git a/arch/m68k/Config.help b/arch/m68k/Config.help index 105f13bd41ab..d82116e52ce4 100644 --- a/arch/m68k/Config.help +++ b/arch/m68k/Config.help @@ -1093,34 +1093,6 @@ CONFIG_NVRAM The module will be called nvram.o. If you want to compile it as a module, say M here and read . -CONFIG_SOUND - If you have a sound card in your computer, i.e. if it can say more - than an occasional beep, say Y. Be sure to have all the information - about your sound card and its configuration down (I/O port, - interrupt and DMA channel), because you will be asked for it. - - You want to read the Sound-HOWTO, available from - . General information about - the modular sound system is contained in the files - . The file - contains some slightly - outdated but still useful information as well. - - If you have a PnP sound card and you want to configure it at boot - time using the ISA PnP tools (read - ), then you need to - compile the sound card support as a module ( = code which can be - inserted in and removed from the running kernel whenever you want) - and load that module after the PnP configuration is finished. To do - this, say M here and read as well - as ; the module will be - called soundcore.o. - - I'm told that even without a sound card, you can make your computer - say more than an occasional beep, by programming the PC speaker. - Kernel patches and supporting utilities to do that are in the pcsp - package, available at . - CONFIG_MAGIC_SYSRQ If you say Y here, you will have some control over the system even if the system crashes for example during kernel debugging (e.g., you diff --git a/arch/mips/Config.help b/arch/mips/Config.help index 82851d00bfef..9c571d44f4dd 100644 --- a/arch/mips/Config.help +++ b/arch/mips/Config.help @@ -785,34 +785,6 @@ CONFIG_RTC The module is called rtc.o. If you want to compile it as a module, say M here and read . -CONFIG_SOUND - If you have a sound card in your computer, i.e. if it can say more - than an occasional beep, say Y. Be sure to have all the information - about your sound card and its configuration down (I/O port, - interrupt and DMA channel), because you will be asked for it. - - You want to read the Sound-HOWTO, available from - . General information about - the modular sound system is contained in the files - . The file - contains some slightly - outdated but still useful information as well. - - If you have a PnP sound card and you want to configure it at boot - time using the ISA PnP tools (read - ), then you need to - compile the sound card support as a module ( = code which can be - inserted in and removed from the running kernel whenever you want) - and load that module after the PnP configuration is finished. To do - this, say M here and read as well - as ; the module will be - called soundcore.o. - - I'm told that even without a sound card, you can make your computer - say more than an occasional beep, by programming the PC speaker. - Kernel patches and supporting utilities to do that are in the pcsp - package, available at . - CONFIG_CROSSCOMPILE Say Y here if you are compiling the kernel on a different architecture than the one it is intended to run on. diff --git a/arch/mips64/Config.help b/arch/mips64/Config.help index f82765e84d69..3139e9ef2ee4 100644 --- a/arch/mips64/Config.help +++ b/arch/mips64/Config.help @@ -371,34 +371,6 @@ CONFIG_CD_NO_IDESCSI answer will get "defaulted" for you if you enable any of the Linux CD-ROM drivers). -CONFIG_SOUND - If you have a sound card in your computer, i.e. if it can say more - than an occasional beep, say Y. Be sure to have all the information - about your sound card and its configuration down (I/O port, - interrupt and DMA channel), because you will be asked for it. - - You want to read the Sound-HOWTO, available from - . General information about - the modular sound system is contained in the files - . The file - contains some slightly - outdated but still useful information as well. - - If you have a PnP sound card and you want to configure it at boot - time using the ISA PnP tools (read - ), then you need to - compile the sound card support as a module ( = code which can be - inserted in and removed from the running kernel whenever you want) - and load that module after the PnP configuration is finished. To do - this, say M here and read as well - as ; the module will be - called soundcore.o. - - I'm told that even without a sound card, you can make your computer - say more than an occasional beep, by programming the PC speaker. - Kernel patches and supporting utilities to do that are in the pcsp - package, available at . - CONFIG_CROSSCOMPILE Say Y here if you are compiling the kernel on a different architecture than the one it is intended to run on. diff --git a/arch/parisc/Config.help b/arch/parisc/Config.help index 24b26f9c419c..a417e1299434 100644 --- a/arch/parisc/Config.help +++ b/arch/parisc/Config.help @@ -476,34 +476,6 @@ CONFIG_STI_CONSOLE machines. Say Y here to build support for it into your kernel. The alternative is to use your primary serial port as a console. -CONFIG_SOUND - If you have a sound card in your computer, i.e. if it can say more - than an occasional beep, say Y. Be sure to have all the information - about your sound card and its configuration down (I/O port, - interrupt and DMA channel), because you will be asked for it. - - You want to read the Sound-HOWTO, available from - . General information about - the modular sound system is contained in the files - . The file - contains some slightly - outdated but still useful information as well. - - If you have a PnP sound card and you want to configure it at boot - time using the ISA PnP tools (read - ), then you need to - compile the sound card support as a module ( = code which can be - inserted in and removed from the running kernel whenever you want) - and load that module after the PnP configuration is finished. To do - this, say M here and read as well - as ; the module will be - called soundcore.o. - - I'm told that even without a sound card, you can make your computer - say more than an occasional beep, by programming the PC speaker. - Kernel patches and supporting utilities to do that are in the pcsp - package, available at . - CONFIG_MAGIC_SYSRQ If you say Y here, you will have some control over the system even if the system crashes for example during kernel debugging (e.g., you diff --git a/arch/ppc/Config.help b/arch/ppc/Config.help index 5786797a89b2..2fdcf23eb3e5 100644 --- a/arch/ppc/Config.help +++ b/arch/ppc/Config.help @@ -512,34 +512,6 @@ CONFIG_MOUSE kernel: saying N will just cause the configurator to skip all the questions about non-serial mice. If unsure, say Y. -CONFIG_SOUND - If you have a sound card in your computer, i.e. if it can say more - than an occasional beep, say Y. Be sure to have all the information - about your sound card and its configuration down (I/O port, - interrupt and DMA channel), because you will be asked for it. - - You want to read the Sound-HOWTO, available from - . General information about - the modular sound system is contained in the files - . The file - contains some slightly - outdated but still useful information as well. - - If you have a PnP sound card and you want to configure it at boot - time using the ISA PnP tools (read - ), then you need to - compile the sound card support as a module ( = code which can be - inserted in and removed from the running kernel whenever you want) - and load that module after the PnP configuration is finished. To do - this, say M here and read as well - as ; the module will be - called soundcore.o. - - I'm told that even without a sound card, you can make your computer - say more than an occasional beep, by programming the PC speaker. - Kernel patches and supporting utilities to do that are in the pcsp - package, available at . - CONFIG_MAGIC_SYSRQ If you say Y here, you will have some control over the system even if the system crashes for example during kernel debugging (e.g., you diff --git a/arch/sh/Config.help b/arch/sh/Config.help index 90d188800cdb..ab5e9678d273 100644 --- a/arch/sh/Config.help +++ b/arch/sh/Config.help @@ -623,34 +623,6 @@ CONFIG_RTC The module is called rtc.o. If you want to compile it as a module, say M here and read . -CONFIG_SOUND - If you have a sound card in your computer, i.e. if it can say more - than an occasional beep, say Y. Be sure to have all the information - about your sound card and its configuration down (I/O port, - interrupt and DMA channel), because you will be asked for it. - - You want to read the Sound-HOWTO, available from - . General information about - the modular sound system is contained in the files - . The file - contains some slightly - outdated but still useful information as well. - - If you have a PnP sound card and you want to configure it at boot - time using the ISA PnP tools (read - ), then you need to - compile the sound card support as a module ( = code which can be - inserted in and removed from the running kernel whenever you want) - and load that module after the PnP configuration is finished. To do - this, say M here and read as well - as ; the module will be - called soundcore.o. - - I'm told that even without a sound card, you can make your computer - say more than an occasional beep, by programming the PC speaker. - Kernel patches and supporting utilities to do that are in the pcsp - package, available at . - CONFIG_MAGIC_SYSRQ If you say Y here, you will have some control over the system even if the system crashes for example during kernel debugging (e.g., you diff --git a/arch/sparc64/Config.help b/arch/sparc64/Config.help index 907510ad4978..0e351d1c1cdb 100644 --- a/arch/sparc64/Config.help +++ b/arch/sparc64/Config.help @@ -1133,34 +1133,6 @@ CONFIG_RTC The module is called rtc.o. If you want to compile it as a module, say M here and read . -CONFIG_SOUND - If you have a sound card in your computer, i.e. if it can say more - than an occasional beep, say Y. Be sure to have all the information - about your sound card and its configuration down (I/O port, - interrupt and DMA channel), because you will be asked for it. - - You want to read the Sound-HOWTO, available from - . General information about - the modular sound system is contained in the files - . The file - contains some slightly - outdated but still useful information as well. - - If you have a PnP sound card and you want to configure it at boot - time using the ISA PnP tools (read - ), then you need to - compile the sound card support as a module ( = code which can be - inserted in and removed from the running kernel whenever you want) - and load that module after the PnP configuration is finished. To do - this, say M here and read as well - as ; the module will be - called soundcore.o. - - I'm told that even without a sound card, you can make your computer - say more than an occasional beep, by programming the PC speaker. - Kernel patches and supporting utilities to do that are in the pcsp - package, available at . - CONFIG_MAGIC_SYSRQ If you say Y here, you will have some control over the system even if the system crashes for example during kernel debugging (e.g., you -- cgit v1.2.3