From fd779eac2d659668be4d3dbdac0710afd5d6db12 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Thu, 21 Aug 2025 14:00:57 +0200 Subject: mtd: nand: raw: atmel: Respect tAR, tCLR in read setup timing Having setup time 0 violates tAR, tCLR of some chips, for instance TOSHIBA TC58NVG2S3ETAI0 cannot be detected successfully (first ID byte being read duplicated, i.e. 98 98 dc 90 15 76 14 03 instead of 98 dc 90 15 76 ...). Atmel Application Notes postulated 1 cycle NRD_SETUP without explanation [1], but it looks more appropriate to just calculate setup time properly. [1] Link: https://ww1.microchip.com/downloads/aemDocuments/documents/MPU32/ApplicationNotes/ApplicationNotes/doc6255.pdf Cc: stable@vger.kernel.org Fixes: f9ce2eddf176 ("mtd: nand: atmel: Add ->setup_data_interface() hooks") Signed-off-by: Alexander Sverdlin Tested-by: Alexander Dahl Signed-off-by: Miquel Raynal --- drivers/mtd/nand/raw/atmel/nand-controller.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers/mtd/nand/raw/atmel/nand-controller.c') diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c index 84ab4a83cbd6..db94d14a3807 100644 --- a/drivers/mtd/nand/raw/atmel/nand-controller.c +++ b/drivers/mtd/nand/raw/atmel/nand-controller.c @@ -1377,14 +1377,24 @@ static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand, if (ret) return ret; + /* + * Read setup timing depends on the operation done on the NAND: + * + * NRD_SETUP = max(tAR, tCLR) + */ + timeps = max(conf->timings.sdr.tAR_min, conf->timings.sdr.tCLR_min); + ncycles = DIV_ROUND_UP(timeps, mckperiodps); + totalcycles += ncycles; + ret = atmel_smc_cs_conf_set_setup(smcconf, ATMEL_SMC_NRD_SHIFT, ncycles); + if (ret) + return ret; + /* * The read cycle timing is directly matching tRC, but is also * dependent on the setup and hold timings we calculated earlier, * which gives: * - * NRD_CYCLE = max(tRC, NRD_PULSE + NRD_HOLD) - * - * NRD_SETUP is always 0. + * NRD_CYCLE = max(tRC, NRD_SETUP + NRD_PULSE + NRD_HOLD) */ ncycles = DIV_ROUND_UP(conf->timings.sdr.tRC_min, mckperiodps); ncycles = max(totalcycles, ncycles); -- cgit v1.2.3