From d7dba6be0f31ae61f5f3296aa130f45d57d30f74 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 7 Jan 2019 13:07:36 +0200 Subject: dmaengine: dw: Remove misleading is_private property The commit a9ddb575d6d6 ("dmaengine: dw_dmac: Enhance device tree support") introduces is_private property in uncertain understanding what does it mean. First of all, documentation defines DMA_PRIVATE capability as Documentation/crypto/async-tx-api.txt: The DMA_PRIVATE capability flag is used to tag dma devices that should not be used by the general-purpose allocator. It can be set at initialization time if it is known that a channel will always be private. Alternatively, it is set when dma_request_channel() finds an unused "public" channel. A couple caveats to note when implementing a driver and consumer: 1/ Once a channel has been privately allocated it will no longer be considered by the general-purpose allocator even after a call to dma_release_channel(). 2/ Since capabilities are specified at the device level a dma_device with multiple channels will either have all channels public, or all channels private. Documentation/driver-api/dmaengine/provider.rst: - DMA_PRIVATE The devices only supports slave transfers, and as such isn't available for async transfers. The capability had been introduced by the commit 59b5ec21446b ("dmaengine: introduce dma_request_channel and private channels") and some code didn't changed from that times ever. Taking into consideration above and the fact that on all known platforms Synopsys DesignWare DMA engine is attached to serve slave transfers, the DMA_PRIVATE capability must be enabled for this device unconditionally. Otherwise, as rightfully noticed in drivers/dma/at_xdmac.c: /* * Without DMA_PRIVATE the driver is not able to allocate more than * one channel, second allocation fails in private_candidate. */ because of of a caveats mentioned in above documentation excerpts. So, remove conditional around DMA_PRIVATE followed by removal leftovers. If someone wonders, DMA_PRIVATE can be not used if and only if the all channels of the DMA controller are supposed to serve memory-to-memory like operations. For example, EP93xx has two controllers, one of which can only perform memory-to-memory transfers Note, this change doesn't affect dmatest to be able to test such controllers. Cc: Greg Kroah-Hartman (maintainer:SERIAL DRIVERS) Cc: Dan Williams Signed-off-by: Andy Shevchenko Acked-by: Greg Kroah-Hartman Signed-off-by: Vinod Koul --- include/linux/platform_data/dma-dw.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h index 1a1d58ebffbf..d443025c5c72 100644 --- a/include/linux/platform_data/dma-dw.h +++ b/include/linux/platform_data/dma-dw.h @@ -38,8 +38,6 @@ struct dw_dma_slave { /** * struct dw_dma_platform_data - Controller configuration parameters * @nr_channels: Number of channels supported by hardware (max 8) - * @is_private: The device channels should be marked as private and not for - * by the general purpose DMA channel allocator. * @is_memcpy: The device channels do support memory-to-memory transfers. * @is_idma32: The type of the DMA controller is iDMA32 * @chan_allocation_order: Allocate channels starting from 0 or 7 @@ -53,7 +51,6 @@ struct dw_dma_slave { */ struct dw_dma_platform_data { unsigned int nr_channels; - bool is_private; bool is_memcpy; bool is_idma32; #define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */ -- cgit v1.2.3 From 078165779608873e7b6eae1316a39c73af9f3edc Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 7 Jan 2019 13:07:37 +0200 Subject: dmaengine: dw: Remove unused internal property All known devices, which use DT for configuration, support memory-to-memory transfers. So enable it by default. The rest two cases, i.e. Intel Quark and PPC460ex, instantiate DMA driver and use its channels exclusively for hardware, which means there is no available channel for any other purposes anyway. Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul --- drivers/dma/dw/core.c | 4 +--- drivers/dma/dw/pci.c | 1 - drivers/dma/dw/platform.c | 6 ------ include/linux/platform_data/dma-dw.h | 2 -- 4 files changed, 1 insertion(+), 12 deletions(-) (limited to 'include/linux/platform_data') diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c index e25503986680..4982e443869c 100644 --- a/drivers/dma/dw/core.c +++ b/drivers/dma/dw/core.c @@ -1227,7 +1227,6 @@ int dw_dma_probe(struct dw_dma_chip *chip) pdata->block_size = dma_readl(dw, MAX_BLK_SIZE); /* Fill platform data with the default values */ - pdata->is_memcpy = true; pdata->chan_allocation_order = CHAN_ALLOCATION_ASCENDING; pdata->chan_priority = CHAN_PRIORITY_ASCENDING; } else if (chip->pdata->nr_channels > DW_DMA_MAX_NR_CHANNELS) { @@ -1340,8 +1339,7 @@ int dw_dma_probe(struct dw_dma_chip *chip) /* Set capabilities */ dma_cap_set(DMA_SLAVE, dw->dma.cap_mask); dma_cap_set(DMA_PRIVATE, dw->dma.cap_mask); - if (pdata->is_memcpy) - dma_cap_set(DMA_MEMCPY, dw->dma.cap_mask); + dma_cap_set(DMA_MEMCPY, dw->dma.cap_mask); dw->dma.dev = chip->dev; dw->dma.device_alloc_chan_resources = dwc_alloc_chan_resources; diff --git a/drivers/dma/dw/pci.c b/drivers/dma/dw/pci.c index 570498faadc3..66d98d7ccad0 100644 --- a/drivers/dma/dw/pci.c +++ b/drivers/dma/dw/pci.c @@ -17,7 +17,6 @@ static struct dw_dma_platform_data mrfld_pdata = { .nr_channels = 8, - .is_memcpy = true, .is_idma32 = true, .chan_allocation_order = CHAN_ALLOCATION_ASCENDING, .chan_priority = CHAN_PRIORITY_ASCENDING, diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c index 6dd8cd1820c1..58fc1ba02a1e 100644 --- a/drivers/dma/dw/platform.c +++ b/drivers/dma/dw/platform.c @@ -128,12 +128,6 @@ dw_dma_parse_dt(struct platform_device *pdev) pdata->nr_masters = nr_masters; pdata->nr_channels = nr_channels; - /* - * All known devices, which use DT for configuration, support - * memory-to-memory transfers. So enable it by default. - */ - pdata->is_memcpy = true; - if (!of_property_read_u32(np, "chan_allocation_order", &tmp)) pdata->chan_allocation_order = (unsigned char)tmp; diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h index d443025c5c72..1c85eeee4171 100644 --- a/include/linux/platform_data/dma-dw.h +++ b/include/linux/platform_data/dma-dw.h @@ -38,7 +38,6 @@ struct dw_dma_slave { /** * struct dw_dma_platform_data - Controller configuration parameters * @nr_channels: Number of channels supported by hardware (max 8) - * @is_memcpy: The device channels do support memory-to-memory transfers. * @is_idma32: The type of the DMA controller is iDMA32 * @chan_allocation_order: Allocate channels starting from 0 or 7 * @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0. @@ -51,7 +50,6 @@ struct dw_dma_slave { */ struct dw_dma_platform_data { unsigned int nr_channels; - bool is_memcpy; bool is_idma32; #define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */ #define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero */ -- cgit v1.2.3 From 69da8be90d5e85e60b5377c47384154b9dabf592 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 7 Jan 2019 13:07:38 +0200 Subject: dmaengine: dw: Split DW and iDMA 32-bit operations Here is a kinda big refactoring that should have been done in the first place, when Intel iDMA 32-bit support appeared. It splits operations which are different to Synopsys DesignWare and Intel iDMA 32-bit controllers. No functional change intended. Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul --- drivers/dma/dw/Makefile | 2 +- drivers/dma/dw/core.c | 190 +++++++---------------------------- drivers/dma/dw/dw.c | 112 +++++++++++++++++++++ drivers/dma/dw/idma32.c | 138 +++++++++++++++++++++++++ drivers/dma/dw/internal.h | 10 +- drivers/dma/dw/pci.c | 45 ++++++--- drivers/dma/dw/platform.c | 8 +- drivers/dma/dw/regs.h | 13 +++ include/linux/dma/dw.h | 4 + include/linux/platform_data/dma-dw.h | 2 - 10 files changed, 343 insertions(+), 181 deletions(-) create mode 100644 drivers/dma/dw/dw.c create mode 100644 drivers/dma/dw/idma32.c (limited to 'include/linux/platform_data') diff --git a/drivers/dma/dw/Makefile b/drivers/dma/dw/Makefile index 2b949c2e4504..63ed895c09aa 100644 --- a/drivers/dma/dw/Makefile +++ b/drivers/dma/dw/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_DW_DMAC_CORE) += dw_dmac_core.o -dw_dmac_core-objs := core.o +dw_dmac_core-objs := core.o dw.o idma32.o obj-$(CONFIG_DW_DMAC) += dw_dmac.o dw_dmac-objs := platform.o diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c index 4982e443869c..8a581d86ea8d 100644 --- a/drivers/dma/dw/core.c +++ b/drivers/dma/dw/core.c @@ -138,44 +138,6 @@ static void dwc_desc_put(struct dw_dma_chan *dwc, struct dw_desc *desc) dwc->descs_allocated--; } -static void dwc_initialize_chan_idma32(struct dw_dma_chan *dwc) -{ - u32 cfghi = 0; - u32 cfglo = 0; - - /* Set default burst alignment */ - cfglo |= IDMA32C_CFGL_DST_BURST_ALIGN | IDMA32C_CFGL_SRC_BURST_ALIGN; - - /* Low 4 bits of the request lines */ - cfghi |= IDMA32C_CFGH_DST_PER(dwc->dws.dst_id & 0xf); - cfghi |= IDMA32C_CFGH_SRC_PER(dwc->dws.src_id & 0xf); - - /* Request line extension (2 bits) */ - cfghi |= IDMA32C_CFGH_DST_PER_EXT(dwc->dws.dst_id >> 4 & 0x3); - cfghi |= IDMA32C_CFGH_SRC_PER_EXT(dwc->dws.src_id >> 4 & 0x3); - - channel_writel(dwc, CFG_LO, cfglo); - channel_writel(dwc, CFG_HI, cfghi); -} - -static void dwc_initialize_chan_dw(struct dw_dma_chan *dwc) -{ - struct dw_dma *dw = to_dw_dma(dwc->chan.device); - u32 cfghi = DWC_CFGH_FIFO_MODE; - u32 cfglo = DWC_CFGL_CH_PRIOR(dwc->priority); - bool hs_polarity = dwc->dws.hs_polarity; - - cfghi |= DWC_CFGH_DST_PER(dwc->dws.dst_id); - cfghi |= DWC_CFGH_SRC_PER(dwc->dws.src_id); - cfghi |= DWC_CFGH_PROTCTL(dw->pdata->protctl); - - /* Set polarity of handshake interface */ - cfglo |= hs_polarity ? DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL : 0; - - channel_writel(dwc, CFG_LO, cfglo); - channel_writel(dwc, CFG_HI, cfghi); -} - static void dwc_initialize(struct dw_dma_chan *dwc) { struct dw_dma *dw = to_dw_dma(dwc->chan.device); @@ -183,10 +145,7 @@ static void dwc_initialize(struct dw_dma_chan *dwc) if (test_bit(DW_DMA_IS_INITIALIZED, &dwc->flags)) return; - if (dw->pdata->is_idma32) - dwc_initialize_chan_idma32(dwc); - else - dwc_initialize_chan_dw(dwc); + dw->initialize_chan(dwc); /* Enable interrupts */ channel_set_bit(dw, MASK.XFER, dwc->mask); @@ -215,37 +174,6 @@ static inline void dwc_chan_disable(struct dw_dma *dw, struct dw_dma_chan *dwc) cpu_relax(); } -static u32 bytes2block(struct dw_dma_chan *dwc, size_t bytes, - unsigned int width, size_t *len) -{ - struct dw_dma *dw = to_dw_dma(dwc->chan.device); - u32 block; - - /* Always in bytes for iDMA 32-bit */ - if (dw->pdata->is_idma32) - width = 0; - - if ((bytes >> width) > dwc->block_size) { - block = dwc->block_size; - *len = block << width; - } else { - block = bytes >> width; - *len = bytes; - } - - return block; -} - -static size_t block2bytes(struct dw_dma_chan *dwc, u32 block, u32 width) -{ - struct dw_dma *dw = to_dw_dma(dwc->chan.device); - - if (dw->pdata->is_idma32) - return IDMA32C_CTLH_BLOCK_TS(block); - - return DWC_CTLH_BLOCK_TS(block) << width; -} - /*----------------------------------------------------------------------*/ /* Perform single block transfer */ @@ -391,10 +319,11 @@ static void dwc_complete_all(struct dw_dma *dw, struct dw_dma_chan *dwc) /* Returns how many bytes were already received from source */ static inline u32 dwc_get_sent(struct dw_dma_chan *dwc) { + struct dw_dma *dw = to_dw_dma(dwc->chan.device); u32 ctlhi = channel_readl(dwc, CTL_HI); u32 ctllo = channel_readl(dwc, CTL_LO); - return block2bytes(dwc, ctlhi, ctllo >> 4 & 7); + return dw->block2bytes(dwc, ctlhi, ctllo >> 4 & 7); } static void dwc_scan_descriptors(struct dw_dma *dw, struct dw_dma_chan *dwc) @@ -651,7 +580,7 @@ dwc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, unsigned int src_width; unsigned int dst_width; unsigned int data_width = dw->pdata->data_width[m_master]; - u32 ctllo; + u32 ctllo, ctlhi; u8 lms = DWC_LLP_LMS(m_master); dev_vdbg(chan2dev(chan), @@ -680,10 +609,12 @@ dwc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, if (!desc) goto err_desc_get; + ctlhi = dw->bytes2block(dwc, len - offset, src_width, &xfer_count); + lli_write(desc, sar, src + offset); lli_write(desc, dar, dest + offset); lli_write(desc, ctllo, ctllo); - lli_write(desc, ctlhi, bytes2block(dwc, len - offset, src_width, &xfer_count)); + lli_write(desc, ctlhi, ctlhi); desc->len = xfer_count; if (!first) { @@ -721,7 +652,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, struct dma_slave_config *sconfig = &dwc->dma_sconfig; struct dw_desc *prev; struct dw_desc *first; - u32 ctllo; + u32 ctllo, ctlhi; u8 m_master = dwc->dws.m_master; u8 lms = DWC_LLP_LMS(m_master); dma_addr_t reg; @@ -768,9 +699,11 @@ slave_sg_todev_fill_desc: if (!desc) goto err_desc_get; + ctlhi = dw->bytes2block(dwc, len, mem_width, &dlen); + lli_write(desc, sar, mem); lli_write(desc, dar, reg); - lli_write(desc, ctlhi, bytes2block(dwc, len, mem_width, &dlen)); + lli_write(desc, ctlhi, ctlhi); lli_write(desc, ctllo, ctllo | DWC_CTLL_SRC_WIDTH(mem_width)); desc->len = dlen; @@ -814,9 +747,11 @@ slave_sg_fromdev_fill_desc: if (!desc) goto err_desc_get; + ctlhi = dw->bytes2block(dwc, len, reg_width, &dlen); + lli_write(desc, sar, reg); lli_write(desc, dar, mem); - lli_write(desc, ctlhi, bytes2block(dwc, len, reg_width, &dlen)); + lli_write(desc, ctlhi, ctlhi); mem_width = __ffs(data_width | mem | dlen); lli_write(desc, ctllo, ctllo | DWC_CTLL_DST_WIDTH(mem_width)); desc->len = dlen; @@ -876,22 +811,12 @@ EXPORT_SYMBOL_GPL(dw_dma_filter); static int dwc_config(struct dma_chan *chan, struct dma_slave_config *sconfig) { struct dw_dma_chan *dwc = to_dw_dma_chan(chan); - struct dma_slave_config *sc = &dwc->dma_sconfig; struct dw_dma *dw = to_dw_dma(chan->device); - /* - * Fix sconfig's burst size according to dw_dmac. We need to convert - * them as: - * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3. - * - * NOTE: burst size 2 is not supported by DesignWare controller. - * iDMA 32-bit supports it. - */ - u32 s = dw->pdata->is_idma32 ? 1 : 2; memcpy(&dwc->dma_sconfig, sconfig, sizeof(*sconfig)); - sc->src_maxburst = sc->src_maxburst > 1 ? fls(sc->src_maxburst) - s : 0; - sc->dst_maxburst = sc->dst_maxburst > 1 ? fls(sc->dst_maxburst) - s : 0; + dw->encode_maxburst(dwc, &dwc->dma_sconfig.src_maxburst); + dw->encode_maxburst(dwc, &dwc->dma_sconfig.dst_maxburst); return 0; } @@ -900,16 +825,9 @@ static void dwc_chan_pause(struct dw_dma_chan *dwc, bool drain) { struct dw_dma *dw = to_dw_dma(dwc->chan.device); unsigned int count = 20; /* timeout iterations */ - u32 cfglo; - cfglo = channel_readl(dwc, CFG_LO); - if (dw->pdata->is_idma32) { - if (drain) - cfglo |= IDMA32C_CFGL_CH_DRAIN; - else - cfglo &= ~IDMA32C_CFGL_CH_DRAIN; - } - channel_writel(dwc, CFG_LO, cfglo | DWC_CFGL_CH_SUSP); + dw->suspend_chan(dwc, drain); + while (!(channel_readl(dwc, CFG_LO) & DWC_CFGL_FIFO_EMPTY) && count--) udelay(2); @@ -1058,33 +976,7 @@ static void dwc_issue_pending(struct dma_chan *chan) /*----------------------------------------------------------------------*/ -/* - * Program FIFO size of channels. - * - * By default full FIFO (512 bytes) is assigned to channel 0. Here we - * slice FIFO on equal parts between channels. - */ -static void idma32_fifo_partition(struct dw_dma *dw) -{ - u64 value = IDMA32C_FP_PSIZE_CH0(64) | IDMA32C_FP_PSIZE_CH1(64) | - IDMA32C_FP_UPDATE; - u64 fifo_partition = 0; - - if (!dw->pdata->is_idma32) - return; - - /* Fill FIFO_PARTITION low bits (Channels 0..1, 4..5) */ - fifo_partition |= value << 0; - - /* Fill FIFO_PARTITION high bits (Channels 2..3, 6..7) */ - fifo_partition |= value << 32; - - /* Program FIFO Partition registers - 64 bytes per channel */ - idma32_writeq(dw, FIFO_PARTITION1, fifo_partition); - idma32_writeq(dw, FIFO_PARTITION0, fifo_partition); -} - -static void dw_dma_off(struct dw_dma *dw) +void do_dw_dma_off(struct dw_dma *dw) { unsigned int i; @@ -1103,7 +995,7 @@ static void dw_dma_off(struct dw_dma *dw) clear_bit(DW_DMA_IS_INITIALIZED, &dw->chan[i].flags); } -static void dw_dma_on(struct dw_dma *dw) +void do_dw_dma_on(struct dw_dma *dw) { dma_writel(dw, CFG, DW_CFG_DMA_EN); } @@ -1139,7 +1031,7 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan) /* Enable controller here if needed */ if (!dw->in_use) - dw_dma_on(dw); + do_dw_dma_on(dw); dw->in_use |= dwc->mask; return 0; @@ -1177,30 +1069,25 @@ static void dwc_free_chan_resources(struct dma_chan *chan) /* Disable controller in case it was a last user */ dw->in_use &= ~dwc->mask; if (!dw->in_use) - dw_dma_off(dw); + do_dw_dma_off(dw); dev_vdbg(chan2dev(chan), "%s: done\n", __func__); } -int dw_dma_probe(struct dw_dma_chip *chip) +int do_dma_probe(struct dw_dma_chip *chip) { + struct dw_dma *dw = chip->dw; struct dw_dma_platform_data *pdata; - struct dw_dma *dw; bool autocfg = false; unsigned int dw_params; unsigned int i; int err; - dw = devm_kzalloc(chip->dev, sizeof(*dw), GFP_KERNEL); - if (!dw) - return -ENOMEM; - dw->pdata = devm_kzalloc(chip->dev, sizeof(*dw->pdata), GFP_KERNEL); if (!dw->pdata) return -ENOMEM; dw->regs = chip->regs; - chip->dw = dw; pm_runtime_get_sync(chip->dev); @@ -1250,15 +1137,10 @@ int dw_dma_probe(struct dw_dma_chip *chip) dw->all_chan_mask = (1 << pdata->nr_channels) - 1; /* Force dma off, just in case */ - dw_dma_off(dw); - - idma32_fifo_partition(dw); + dw->disable(dw); /* Device and instance ID for IRQ and DMA pool */ - if (pdata->is_idma32) - snprintf(dw->name, sizeof(dw->name), "idma32:dmac%d", chip->id); - else - snprintf(dw->name, sizeof(dw->name), "dw:dmac%d", chip->id); + dw->set_device_name(dw, chip->id); /* Create a pool of consistent memory blocks for hardware descriptors */ dw->desc_pool = dmam_pool_create(dw->name, chip->dev, @@ -1380,16 +1262,15 @@ err_pdata: pm_runtime_put_sync_suspend(chip->dev); return err; } -EXPORT_SYMBOL_GPL(dw_dma_probe); -int dw_dma_remove(struct dw_dma_chip *chip) +int do_dma_remove(struct dw_dma_chip *chip) { struct dw_dma *dw = chip->dw; struct dw_dma_chan *dwc, *_dwc; pm_runtime_get_sync(chip->dev); - dw_dma_off(dw); + do_dw_dma_off(dw); dma_async_device_unregister(&dw->dma); free_irq(chip->irq, dw); @@ -1404,27 +1285,24 @@ int dw_dma_remove(struct dw_dma_chip *chip) pm_runtime_put_sync_suspend(chip->dev); return 0; } -EXPORT_SYMBOL_GPL(dw_dma_remove); -int dw_dma_disable(struct dw_dma_chip *chip) +int do_dw_dma_disable(struct dw_dma_chip *chip) { struct dw_dma *dw = chip->dw; - dw_dma_off(dw); + dw->disable(dw); return 0; } -EXPORT_SYMBOL_GPL(dw_dma_disable); +EXPORT_SYMBOL_GPL(do_dw_dma_disable); -int dw_dma_enable(struct dw_dma_chip *chip) +int do_dw_dma_enable(struct dw_dma_chip *chip) { struct dw_dma *dw = chip->dw; - idma32_fifo_partition(dw); - - dw_dma_on(dw); + dw->enable(dw); return 0; } -EXPORT_SYMBOL_GPL(dw_dma_enable); +EXPORT_SYMBOL_GPL(do_dw_dma_enable); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller core driver"); diff --git a/drivers/dma/dw/dw.c b/drivers/dma/dw/dw.c new file mode 100644 index 000000000000..977aa28bf81d --- /dev/null +++ b/drivers/dma/dw/dw.c @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2007-2008 Atmel Corporation +// Copyright (C) 2010-2011 ST Microelectronics +// Copyright (C) 2013,2018 Intel Corporation + +#include +#include +#include +#include + +#include "internal.h" + +static void dw_dma_initialize_chan(struct dw_dma_chan *dwc) +{ + struct dw_dma *dw = to_dw_dma(dwc->chan.device); + u32 cfghi = DWC_CFGH_FIFO_MODE; + u32 cfglo = DWC_CFGL_CH_PRIOR(dwc->priority); + bool hs_polarity = dwc->dws.hs_polarity; + + cfghi |= DWC_CFGH_DST_PER(dwc->dws.dst_id); + cfghi |= DWC_CFGH_SRC_PER(dwc->dws.src_id); + cfghi |= DWC_CFGH_PROTCTL(dw->pdata->protctl); + + /* Set polarity of handshake interface */ + cfglo |= hs_polarity ? DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL : 0; + + channel_writel(dwc, CFG_LO, cfglo); + channel_writel(dwc, CFG_HI, cfghi); +} + +static void dw_dma_suspend_chan(struct dw_dma_chan *dwc, bool drain) +{ + u32 cfglo = channel_readl(dwc, CFG_LO); + + channel_writel(dwc, CFG_LO, cfglo | DWC_CFGL_CH_SUSP); +} + +static u32 dw_dma_bytes2block(struct dw_dma_chan *dwc, + size_t bytes, unsigned int width, size_t *len) +{ + u32 block; + + if ((bytes >> width) > dwc->block_size) { + block = dwc->block_size; + *len = dwc->block_size << width; + } else { + block = bytes >> width; + *len = bytes; + } + + return block; +} + +static size_t dw_dma_block2bytes(struct dw_dma_chan *dwc, u32 block, u32 width) +{ + return DWC_CTLH_BLOCK_TS(block) << width; +} + +static void dw_dma_encode_maxburst(struct dw_dma_chan *dwc, u32 *maxburst) +{ + /* + * Fix burst size according to dw_dmac. We need to convert them as: + * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3. + */ + *maxburst = *maxburst > 1 ? fls(*maxburst) - 2 : 0; +} + +static void dw_dma_set_device_name(struct dw_dma *dw, int id) +{ + snprintf(dw->name, sizeof(dw->name), "dw:dmac%d", id); +} + +static void dw_dma_disable(struct dw_dma *dw) +{ + do_dw_dma_off(dw); +} + +static void dw_dma_enable(struct dw_dma *dw) +{ + do_dw_dma_on(dw); +} + +int dw_dma_probe(struct dw_dma_chip *chip) +{ + struct dw_dma *dw; + + dw = devm_kzalloc(chip->dev, sizeof(*dw), GFP_KERNEL); + if (!dw) + return -ENOMEM; + + /* Channel operations */ + dw->initialize_chan = dw_dma_initialize_chan; + dw->suspend_chan = dw_dma_suspend_chan; + dw->encode_maxburst = dw_dma_encode_maxburst; + dw->bytes2block = dw_dma_bytes2block; + dw->block2bytes = dw_dma_block2bytes; + + /* Device operations */ + dw->set_device_name = dw_dma_set_device_name; + dw->disable = dw_dma_disable; + dw->enable = dw_dma_enable; + + chip->dw = dw; + return do_dma_probe(chip); +} +EXPORT_SYMBOL_GPL(dw_dma_probe); + +int dw_dma_remove(struct dw_dma_chip *chip) +{ + return do_dma_remove(chip); +} +EXPORT_SYMBOL_GPL(dw_dma_remove); diff --git a/drivers/dma/dw/idma32.c b/drivers/dma/dw/idma32.c new file mode 100644 index 000000000000..8707830f39ad --- /dev/null +++ b/drivers/dma/dw/idma32.c @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2013,2018 Intel Corporation + +#include +#include +#include +#include + +#include "internal.h" + +static void idma32_initialize_chan(struct dw_dma_chan *dwc) +{ + u32 cfghi = 0; + u32 cfglo = 0; + + /* Set default burst alignment */ + cfglo |= IDMA32C_CFGL_DST_BURST_ALIGN | IDMA32C_CFGL_SRC_BURST_ALIGN; + + /* Low 4 bits of the request lines */ + cfghi |= IDMA32C_CFGH_DST_PER(dwc->dws.dst_id & 0xf); + cfghi |= IDMA32C_CFGH_SRC_PER(dwc->dws.src_id & 0xf); + + /* Request line extension (2 bits) */ + cfghi |= IDMA32C_CFGH_DST_PER_EXT(dwc->dws.dst_id >> 4 & 0x3); + cfghi |= IDMA32C_CFGH_SRC_PER_EXT(dwc->dws.src_id >> 4 & 0x3); + + channel_writel(dwc, CFG_LO, cfglo); + channel_writel(dwc, CFG_HI, cfghi); +} + +static void idma32_suspend_chan(struct dw_dma_chan *dwc, bool drain) +{ + u32 cfglo = channel_readl(dwc, CFG_LO); + + if (drain) + cfglo |= IDMA32C_CFGL_CH_DRAIN; + else + cfglo &= ~IDMA32C_CFGL_CH_DRAIN; + + channel_writel(dwc, CFG_LO, cfglo | DWC_CFGL_CH_SUSP); +} + +static u32 idma32_bytes2block(struct dw_dma_chan *dwc, + size_t bytes, unsigned int width, size_t *len) +{ + u32 block; + + if (bytes > dwc->block_size) { + block = dwc->block_size; + *len = dwc->block_size; + } else { + block = bytes; + *len = bytes; + } + + return block; +} + +static size_t idma32_block2bytes(struct dw_dma_chan *dwc, u32 block, u32 width) +{ + return IDMA32C_CTLH_BLOCK_TS(block); +} + +static void idma32_encode_maxburst(struct dw_dma_chan *dwc, u32 *maxburst) +{ + *maxburst = *maxburst > 1 ? fls(*maxburst) - 1 : 0; +} + +static void idma32_set_device_name(struct dw_dma *dw, int id) +{ + snprintf(dw->name, sizeof(dw->name), "idma32:dmac%d", id); +} + +/* + * Program FIFO size of channels. + * + * By default full FIFO (512 bytes) is assigned to channel 0. Here we + * slice FIFO on equal parts between channels. + */ +static void idma32_fifo_partition(struct dw_dma *dw) +{ + u64 value = IDMA32C_FP_PSIZE_CH0(64) | IDMA32C_FP_PSIZE_CH1(64) | + IDMA32C_FP_UPDATE; + u64 fifo_partition = 0; + + /* Fill FIFO_PARTITION low bits (Channels 0..1, 4..5) */ + fifo_partition |= value << 0; + + /* Fill FIFO_PARTITION high bits (Channels 2..3, 6..7) */ + fifo_partition |= value << 32; + + /* Program FIFO Partition registers - 64 bytes per channel */ + idma32_writeq(dw, FIFO_PARTITION1, fifo_partition); + idma32_writeq(dw, FIFO_PARTITION0, fifo_partition); +} + +static void idma32_disable(struct dw_dma *dw) +{ + do_dw_dma_off(dw); + idma32_fifo_partition(dw); +} + +static void idma32_enable(struct dw_dma *dw) +{ + idma32_fifo_partition(dw); + do_dw_dma_on(dw); +} + +int idma32_dma_probe(struct dw_dma_chip *chip) +{ + struct dw_dma *dw; + + dw = devm_kzalloc(chip->dev, sizeof(*dw), GFP_KERNEL); + if (!dw) + return -ENOMEM; + + /* Channel operations */ + dw->initialize_chan = idma32_initialize_chan; + dw->suspend_chan = idma32_suspend_chan; + dw->encode_maxburst = idma32_encode_maxburst; + dw->bytes2block = idma32_bytes2block; + dw->block2bytes = idma32_block2bytes; + + /* Device operations */ + dw->set_device_name = idma32_set_device_name; + dw->disable = idma32_disable; + dw->enable = idma32_enable; + + chip->dw = dw; + return do_dma_probe(chip); +} +EXPORT_SYMBOL_GPL(idma32_dma_probe); + +int idma32_dma_remove(struct dw_dma_chip *chip) +{ + return do_dma_remove(chip); +} +EXPORT_SYMBOL_GPL(idma32_dma_remove); diff --git a/drivers/dma/dw/internal.h b/drivers/dma/dw/internal.h index 41439732ff6b..fdcac21ea665 100644 --- a/drivers/dma/dw/internal.h +++ b/drivers/dma/dw/internal.h @@ -15,8 +15,14 @@ #include "regs.h" -int dw_dma_disable(struct dw_dma_chip *chip); -int dw_dma_enable(struct dw_dma_chip *chip); +int do_dma_probe(struct dw_dma_chip *chip); +int do_dma_remove(struct dw_dma_chip *chip); + +void do_dw_dma_on(struct dw_dma *dw); +void do_dw_dma_off(struct dw_dma *dw); + +int do_dw_dma_disable(struct dw_dma_chip *chip); +int do_dw_dma_enable(struct dw_dma_chip *chip); extern bool dw_dma_filter(struct dma_chan *chan, void *param); diff --git a/drivers/dma/dw/pci.c b/drivers/dma/dw/pci.c index 66d98d7ccad0..e9ba25b4f950 100644 --- a/drivers/dma/dw/pci.c +++ b/drivers/dma/dw/pci.c @@ -15,9 +15,17 @@ #include "internal.h" -static struct dw_dma_platform_data mrfld_pdata = { +struct dw_dma_pci_data { + const struct dw_dma_platform_data *pdata; + int (*probe)(struct dw_dma_chip *chip); +}; + +static const struct dw_dma_pci_data dw_pci_data = { + .probe = dw_dma_probe, +}; + +static const struct dw_dma_platform_data idma32_pdata = { .nr_channels = 8, - .is_idma32 = true, .chan_allocation_order = CHAN_ALLOCATION_ASCENDING, .chan_priority = CHAN_PRIORITY_ASCENDING, .block_size = 131071, @@ -26,9 +34,14 @@ static struct dw_dma_platform_data mrfld_pdata = { .multi_block = {1, 1, 1, 1, 1, 1, 1, 1}, }; +static const struct dw_dma_pci_data idma32_pci_data = { + .pdata = &idma32_pdata, + .probe = idma32_dma_probe, +}; + static int dw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid) { - const struct dw_dma_platform_data *pdata = (void *)pid->driver_data; + const struct dw_dma_pci_data *data = (void *)pid->driver_data; struct dw_dma_chip *chip; int ret; @@ -61,9 +74,9 @@ static int dw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid) chip->id = pdev->devfn; chip->regs = pcim_iomap_table(pdev)[0]; chip->irq = pdev->irq; - chip->pdata = pdata; + chip->pdata = data->pdata; - ret = dw_dma_probe(chip); + ret = data->probe(chip); if (ret) return ret; @@ -89,7 +102,7 @@ static int dw_pci_suspend_late(struct device *dev) struct pci_dev *pci = to_pci_dev(dev); struct dw_dma_chip *chip = pci_get_drvdata(pci); - return dw_dma_disable(chip); + return do_dw_dma_disable(chip); }; static int dw_pci_resume_early(struct device *dev) @@ -97,7 +110,7 @@ static int dw_pci_resume_early(struct device *dev) struct pci_dev *pci = to_pci_dev(dev); struct dw_dma_chip *chip = pci_get_drvdata(pci); - return dw_dma_enable(chip); + return do_dw_dma_enable(chip); }; #endif /* CONFIG_PM_SLEEP */ @@ -108,24 +121,24 @@ static const struct dev_pm_ops dw_pci_dev_pm_ops = { static const struct pci_device_id dw_pci_id_table[] = { /* Medfield (GPDMA) */ - { PCI_VDEVICE(INTEL, 0x0827) }, + { PCI_VDEVICE(INTEL, 0x0827), (kernel_ulong_t)&dw_pci_data }, /* BayTrail */ - { PCI_VDEVICE(INTEL, 0x0f06) }, - { PCI_VDEVICE(INTEL, 0x0f40) }, + { PCI_VDEVICE(INTEL, 0x0f06), (kernel_ulong_t)&dw_pci_data }, + { PCI_VDEVICE(INTEL, 0x0f40), (kernel_ulong_t)&dw_pci_data }, - /* Merrifield iDMA 32-bit (GPDMA) */ - { PCI_VDEVICE(INTEL, 0x11a2), (kernel_ulong_t)&mrfld_pdata }, + /* Merrifield */ + { PCI_VDEVICE(INTEL, 0x11a2), (kernel_ulong_t)&idma32_pci_data }, /* Braswell */ - { PCI_VDEVICE(INTEL, 0x2286) }, - { PCI_VDEVICE(INTEL, 0x22c0) }, + { PCI_VDEVICE(INTEL, 0x2286), (kernel_ulong_t)&dw_pci_data }, + { PCI_VDEVICE(INTEL, 0x22c0), (kernel_ulong_t)&dw_pci_data }, /* Haswell */ - { PCI_VDEVICE(INTEL, 0x9c60) }, + { PCI_VDEVICE(INTEL, 0x9c60), (kernel_ulong_t)&dw_pci_data }, /* Broadwell */ - { PCI_VDEVICE(INTEL, 0x9ce0) }, + { PCI_VDEVICE(INTEL, 0x9ce0), (kernel_ulong_t)&dw_pci_data }, { } }; diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c index 58fc1ba02a1e..d5196c97e4f4 100644 --- a/drivers/dma/dw/platform.c +++ b/drivers/dma/dw/platform.c @@ -255,7 +255,7 @@ static void dw_shutdown(struct platform_device *pdev) struct dw_dma_chip *chip = platform_get_drvdata(pdev); /* - * We have to call dw_dma_disable() to stop any ongoing transfer. On + * We have to call do_dw_dma_disable() to stop any ongoing transfer. On * some platforms we can't do that since DMA device is powered off. * Moreover we have no possibility to check if the platform is affected * or not. That's why we call pm_runtime_get_sync() / pm_runtime_put() @@ -264,7 +264,7 @@ static void dw_shutdown(struct platform_device *pdev) * used by the driver. */ pm_runtime_get_sync(chip->dev); - dw_dma_disable(chip); + do_dw_dma_disable(chip); pm_runtime_put_sync_suspend(chip->dev); clk_disable_unprepare(chip->clk); @@ -294,7 +294,7 @@ static int dw_suspend_late(struct device *dev) { struct dw_dma_chip *chip = dev_get_drvdata(dev); - dw_dma_disable(chip); + do_dw_dma_disable(chip); clk_disable_unprepare(chip->clk); return 0; @@ -309,7 +309,7 @@ static int dw_resume_early(struct device *dev) if (ret) return ret; - return dw_dma_enable(chip); + return do_dw_dma_enable(chip); } #endif /* CONFIG_PM_SLEEP */ diff --git a/drivers/dma/dw/regs.h b/drivers/dma/dw/regs.h index 646c9c960c07..66aa8b227248 100644 --- a/drivers/dma/dw/regs.h +++ b/drivers/dma/dw/regs.h @@ -312,6 +312,19 @@ struct dw_dma { u8 all_chan_mask; u8 in_use; + /* Channel operations */ + void (*initialize_chan)(struct dw_dma_chan *dwc); + void (*suspend_chan)(struct dw_dma_chan *dwc, bool drain); + void (*encode_maxburst)(struct dw_dma_chan *dwc, u32 *maxburst); + u32 (*bytes2block)(struct dw_dma_chan *dwc, size_t bytes, + unsigned int width, size_t *len); + size_t (*block2bytes)(struct dw_dma_chan *dwc, u32 block, u32 width); + + /* Device operations */ + void (*set_device_name)(struct dw_dma *dw, int id); + void (*disable)(struct dw_dma *dw); + void (*enable)(struct dw_dma *dw); + /* platform data */ struct dw_dma_platform_data *pdata; }; diff --git a/include/linux/dma/dw.h b/include/linux/dma/dw.h index e166cac8e870..d643d331c20e 100644 --- a/include/linux/dma/dw.h +++ b/include/linux/dma/dw.h @@ -45,9 +45,13 @@ struct dw_dma_chip { #if IS_ENABLED(CONFIG_DW_DMAC_CORE) int dw_dma_probe(struct dw_dma_chip *chip); int dw_dma_remove(struct dw_dma_chip *chip); +int idma32_dma_probe(struct dw_dma_chip *chip); +int idma32_dma_remove(struct dw_dma_chip *chip); #else static inline int dw_dma_probe(struct dw_dma_chip *chip) { return -ENODEV; } static inline int dw_dma_remove(struct dw_dma_chip *chip) { return 0; } +static inline int idma32_dma_probe(struct dw_dma_chip *chip) { return -ENODEV; } +static inline int idma32_dma_remove(struct dw_dma_chip *chip) { return 0; } #endif /* CONFIG_DW_DMAC_CORE */ #endif /* _DMA_DW_H */ diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h index 1c85eeee4171..576048433809 100644 --- a/include/linux/platform_data/dma-dw.h +++ b/include/linux/platform_data/dma-dw.h @@ -38,7 +38,6 @@ struct dw_dma_slave { /** * struct dw_dma_platform_data - Controller configuration parameters * @nr_channels: Number of channels supported by hardware (max 8) - * @is_idma32: The type of the DMA controller is iDMA32 * @chan_allocation_order: Allocate channels starting from 0 or 7 * @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0. * @block_size: Maximum block size supported by the controller @@ -50,7 +49,6 @@ struct dw_dma_slave { */ struct dw_dma_platform_data { unsigned int nr_channels; - bool is_idma32; #define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */ #define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero */ unsigned char chan_allocation_order; -- cgit v1.2.3 From b466a37fbcc99ef79ea59e40ef6aa8391430b0d8 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 7 Jan 2019 13:07:41 +0200 Subject: dmaengine: dw: convert to SPDX identifiers This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul --- drivers/dma/dw/Kconfig | 2 ++ drivers/dma/dw/core.c | 5 +---- drivers/dma/dw/internal.h | 5 +---- drivers/dma/dw/pci.c | 5 +---- drivers/dma/dw/platform.c | 5 +---- drivers/dma/dw/regs.h | 5 +---- include/linux/dma/dw.h | 5 +---- include/linux/platform_data/dma-dw.h | 5 +---- 8 files changed, 9 insertions(+), 28 deletions(-) (limited to 'include/linux/platform_data') diff --git a/drivers/dma/dw/Kconfig b/drivers/dma/dw/Kconfig index 04b9728c1d26..e5162690de8f 100644 --- a/drivers/dma/dw/Kconfig +++ b/drivers/dma/dw/Kconfig @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # # DMA engine configuration for dw # diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c index b7e4dab28f8a..3a1ab52ffae0 100644 --- a/drivers/dma/dw/core.c +++ b/drivers/dma/dw/core.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Core driver for the Synopsys DesignWare DMA Controller * * Copyright (C) 2007-2008 Atmel Corporation * Copyright (C) 2010-2011 ST Microelectronics * Copyright (C) 2013 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include diff --git a/drivers/dma/dw/internal.h b/drivers/dma/dw/internal.h index fdcac21ea665..1dd7a4e6dd23 100644 --- a/drivers/dma/dw/internal.h +++ b/drivers/dma/dw/internal.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Driver for the Synopsys DesignWare DMA Controller * * Copyright (C) 2013 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _DMA_DW_INTERNAL_H diff --git a/drivers/dma/dw/pci.c b/drivers/dma/dw/pci.c index e9ba25b4f950..e79a75db0852 100644 --- a/drivers/dma/dw/pci.c +++ b/drivers/dma/dw/pci.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * PCI driver for the Synopsys DesignWare DMA Controller * * Copyright (C) 2013 Intel Corporation * Author: Andy Shevchenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c index d5196c97e4f4..382dfd9e9600 100644 --- a/drivers/dma/dw/platform.c +++ b/drivers/dma/dw/platform.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Platform driver for the Synopsys DesignWare DMA Controller * @@ -6,10 +7,6 @@ * Copyright (C) 2013 Intel Corporation * * Some parts of this driver are derived from the original dw_dmac. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include diff --git a/drivers/dma/dw/regs.h b/drivers/dma/dw/regs.h index 07f91325e559..3fce66ecee7a 100644 --- a/drivers/dma/dw/regs.h +++ b/drivers/dma/dw/regs.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Driver for the Synopsys DesignWare AHB DMA Controller * * Copyright (C) 2005-2007 Atmel Corporation * Copyright (C) 2010-2011 ST Microelectronics * Copyright (C) 2016 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include diff --git a/include/linux/dma/dw.h b/include/linux/dma/dw.h index d643d331c20e..9752f3745f76 100644 --- a/include/linux/dma/dw.h +++ b/include/linux/dma/dw.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Driver for the Synopsys DesignWare DMA Controller * * Copyright (C) 2007 Atmel Corporation * Copyright (C) 2010-2011 ST Microelectronics * Copyright (C) 2014 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _DMA_DW_H #define _DMA_DW_H diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h index 576048433809..f3eaf9ec00a1 100644 --- a/include/linux/platform_data/dma-dw.h +++ b/include/linux/platform_data/dma-dw.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Driver for the Synopsys DesignWare DMA Controller * * Copyright (C) 2007 Atmel Corporation * Copyright (C) 2010-2011 ST Microelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _PLATFORM_DATA_DMA_DW_H #define _PLATFORM_DATA_DMA_DW_H -- cgit v1.2.3 From dc60a4cfb77c891f67f31953025208067b05883c Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 17 Jan 2019 11:47:55 -0200 Subject: media: soc_camera_platform: remove obsolete soc_camera test driver This is a test stub driver for soc_camera. Since soc_camera is being deprecated (and in fact, nobody is using it anymore) there's no sense in keeping this test driver. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/soc_camera/Kconfig | 6 - drivers/media/platform/soc_camera/Makefile | 4 - .../platform/soc_camera/soc_camera_platform.c | 188 --------------------- .../platform_data/media/soc_camera_platform.h | 83 --------- 4 files changed, 281 deletions(-) delete mode 100644 drivers/media/platform/soc_camera/soc_camera_platform.c delete mode 100644 include/linux/platform_data/media/soc_camera_platform.h (limited to 'include/linux/platform_data') diff --git a/drivers/media/platform/soc_camera/Kconfig b/drivers/media/platform/soc_camera/Kconfig index d471d34b884c..8f9b3bac5450 100644 --- a/drivers/media/platform/soc_camera/Kconfig +++ b/drivers/media/platform/soc_camera/Kconfig @@ -6,9 +6,3 @@ config SOC_CAMERA SoC Camera is a common API to several cameras, not connecting over a bus like PCI or USB. For example some i2c camera connected directly to the data bus of an SoC. - -config SOC_CAMERA_PLATFORM - tristate "platform camera support" - depends on SOC_CAMERA - help - This is a generic SoC camera platform driver, useful for testing diff --git a/drivers/media/platform/soc_camera/Makefile b/drivers/media/platform/soc_camera/Makefile index 2cb7022e073b..85d5e74f3b2b 100644 --- a/drivers/media/platform/soc_camera/Makefile +++ b/drivers/media/platform/soc_camera/Makefile @@ -1,5 +1 @@ obj-$(CONFIG_SOC_CAMERA) += soc_camera.o soc_mediabus.o - -# a platform subdevice driver stub, allowing to support cameras by adding a -# couple of callback functions to the board code -obj-$(CONFIG_SOC_CAMERA_PLATFORM) += soc_camera_platform.o diff --git a/drivers/media/platform/soc_camera/soc_camera_platform.c b/drivers/media/platform/soc_camera/soc_camera_platform.c deleted file mode 100644 index 79fbe1fea95f..000000000000 --- a/drivers/media/platform/soc_camera/soc_camera_platform.c +++ /dev/null @@ -1,188 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Generic Platform Camera Driver - * - * Copyright (C) 2008 Magnus Damm - * Based on mt9m001 driver, - * Copyright (C) 2008, Guennadi Liakhovetski - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct soc_camera_platform_priv { - struct v4l2_subdev subdev; -}; - -static struct soc_camera_platform_priv *get_priv(struct platform_device *pdev) -{ - struct v4l2_subdev *subdev = platform_get_drvdata(pdev); - return container_of(subdev, struct soc_camera_platform_priv, subdev); -} - -static int soc_camera_platform_s_stream(struct v4l2_subdev *sd, int enable) -{ - struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd); - return p->set_capture(p, enable); -} - -static int soc_camera_platform_fill_fmt(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_format *format) -{ - struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd); - struct v4l2_mbus_framefmt *mf = &format->format; - - mf->width = p->format.width; - mf->height = p->format.height; - mf->code = p->format.code; - mf->colorspace = p->format.colorspace; - mf->field = p->format.field; - - return 0; -} - -static int soc_camera_platform_s_power(struct v4l2_subdev *sd, int on) -{ - struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd); - - return soc_camera_set_power(p->icd->control, &p->icd->sdesc->subdev_desc, NULL, on); -} - -static const struct v4l2_subdev_core_ops platform_subdev_core_ops = { - .s_power = soc_camera_platform_s_power, -}; - -static int soc_camera_platform_enum_mbus_code(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_mbus_code_enum *code) -{ - struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd); - - if (code->pad || code->index) - return -EINVAL; - - code->code = p->format.code; - return 0; -} - -static int soc_camera_platform_get_selection(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_selection *sel) -{ - struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd); - - if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) - return -EINVAL; - - switch (sel->target) { - case V4L2_SEL_TGT_CROP_BOUNDS: - case V4L2_SEL_TGT_CROP_DEFAULT: - case V4L2_SEL_TGT_CROP: - sel->r.left = 0; - sel->r.top = 0; - sel->r.width = p->format.width; - sel->r.height = p->format.height; - return 0; - default: - return -EINVAL; - } -} - -static int soc_camera_platform_g_mbus_config(struct v4l2_subdev *sd, - struct v4l2_mbus_config *cfg) -{ - struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd); - - cfg->flags = p->mbus_param; - cfg->type = p->mbus_type; - - return 0; -} - -static const struct v4l2_subdev_video_ops platform_subdev_video_ops = { - .s_stream = soc_camera_platform_s_stream, - .g_mbus_config = soc_camera_platform_g_mbus_config, -}; - -static const struct v4l2_subdev_pad_ops platform_subdev_pad_ops = { - .enum_mbus_code = soc_camera_platform_enum_mbus_code, - .get_selection = soc_camera_platform_get_selection, - .get_fmt = soc_camera_platform_fill_fmt, - .set_fmt = soc_camera_platform_fill_fmt, -}; - -static const struct v4l2_subdev_ops platform_subdev_ops = { - .core = &platform_subdev_core_ops, - .video = &platform_subdev_video_ops, - .pad = &platform_subdev_pad_ops, -}; - -static int soc_camera_platform_probe(struct platform_device *pdev) -{ - struct soc_camera_host *ici; - struct soc_camera_platform_priv *priv; - struct soc_camera_platform_info *p = pdev->dev.platform_data; - struct soc_camera_device *icd; - - if (!p) - return -EINVAL; - - if (!p->icd) { - dev_err(&pdev->dev, - "Platform has not set soc_camera_device pointer!\n"); - return -EINVAL; - } - - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - icd = p->icd; - - /* soc-camera convention: control's drvdata points to the subdev */ - platform_set_drvdata(pdev, &priv->subdev); - /* Set the control device reference */ - icd->control = &pdev->dev; - - ici = to_soc_camera_host(icd->parent); - - v4l2_subdev_init(&priv->subdev, &platform_subdev_ops); - v4l2_set_subdevdata(&priv->subdev, p); - strscpy(priv->subdev.name, dev_name(&pdev->dev), - sizeof(priv->subdev.name)); - - return v4l2_device_register_subdev(&ici->v4l2_dev, &priv->subdev); -} - -static int soc_camera_platform_remove(struct platform_device *pdev) -{ - struct soc_camera_platform_priv *priv = get_priv(pdev); - struct soc_camera_platform_info *p = v4l2_get_subdevdata(&priv->subdev); - - p->icd->control = NULL; - v4l2_device_unregister_subdev(&priv->subdev); - return 0; -} - -static struct platform_driver soc_camera_platform_driver = { - .driver = { - .name = "soc_camera_platform", - }, - .probe = soc_camera_platform_probe, - .remove = soc_camera_platform_remove, -}; - -module_platform_driver(soc_camera_platform_driver); - -MODULE_DESCRIPTION("SoC Camera Platform driver"); -MODULE_AUTHOR("Magnus Damm"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:soc_camera_platform"); diff --git a/include/linux/platform_data/media/soc_camera_platform.h b/include/linux/platform_data/media/soc_camera_platform.h deleted file mode 100644 index 1e5065dab430..000000000000 --- a/include/linux/platform_data/media/soc_camera_platform.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Generic Platform Camera Driver Header - * - * Copyright (C) 2008 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __SOC_CAMERA_H__ -#define __SOC_CAMERA_H__ - -#include -#include -#include - -struct device; - -struct soc_camera_platform_info { - const char *format_name; - unsigned long format_depth; - struct v4l2_mbus_framefmt format; - unsigned long mbus_param; - enum v4l2_mbus_type mbus_type; - struct soc_camera_device *icd; - int (*set_capture)(struct soc_camera_platform_info *info, int enable); -}; - -static inline void soc_camera_platform_release(struct platform_device **pdev) -{ - *pdev = NULL; -} - -static inline int soc_camera_platform_add(struct soc_camera_device *icd, - struct platform_device **pdev, - struct soc_camera_link *plink, - void (*release)(struct device *dev), - int id) -{ - struct soc_camera_subdev_desc *ssdd = - (struct soc_camera_subdev_desc *)plink; - struct soc_camera_platform_info *info = ssdd->drv_priv; - int ret; - - if (&icd->sdesc->subdev_desc != ssdd) - return -ENODEV; - - if (*pdev) - return -EBUSY; - - *pdev = platform_device_alloc("soc_camera_platform", id); - if (!*pdev) - return -ENOMEM; - - info->icd = icd; - - (*pdev)->dev.platform_data = info; - (*pdev)->dev.release = release; - - ret = platform_device_add(*pdev); - if (ret < 0) { - platform_device_put(*pdev); - *pdev = NULL; - info->icd = NULL; - } - - return ret; -} - -static inline void soc_camera_platform_del(const struct soc_camera_device *icd, - struct platform_device *pdev, - const struct soc_camera_link *plink) -{ - const struct soc_camera_subdev_desc *ssdd = - (const struct soc_camera_subdev_desc *)plink; - if (&icd->sdesc->subdev_desc != ssdd || !pdev) - return; - - platform_device_unregister(pdev); -} - -#endif /* __SOC_CAMERA_H__ */ -- cgit v1.2.3 From 9b28aa1d0eae1be1016c8f4ba504545caff01da3 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Wed, 12 Dec 2018 23:59:13 +0000 Subject: platform_data/mlxreg: Document fixes for core platform data Remove "led" from the description, since the structure "mlxreg_core_platform_data" is used not only for led data. Signed-off-by: Vadim Pasternak Signed-off-by: Darren Hart (VMware) --- include/linux/platform_data/mlxreg.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mlxreg.h b/include/linux/platform_data/mlxreg.h index 19f5cb618c55..d823713f94ec 100644 --- a/include/linux/platform_data/mlxreg.h +++ b/include/linux/platform_data/mlxreg.h @@ -107,9 +107,9 @@ struct mlxreg_core_item { /** * struct mlxreg_core_platform_data - platform data: * - * @led_data: led private data; + * @data: instance private data; * @regmap: register map of parent device; - * @counter: number of led instances; + * @counter: number of instances; */ struct mlxreg_core_platform_data { struct mlxreg_core_data *data; -- cgit v1.2.3 From 946e4e02b11889cb161b15ff4712a8ba21a50eb6 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Wed, 12 Dec 2018 23:59:14 +0000 Subject: platform_data/mlxreg: Add capability field to core platform data Add capability field to "mlxreg_core_platform_data" structure. The purpose of this register is to provide additional info to platform driver through the atribute related capability register. Signed-off-by: Vadim Pasternak Signed-off-by: Darren Hart (VMware) --- include/linux/platform_data/mlxreg.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mlxreg.h b/include/linux/platform_data/mlxreg.h index d823713f94ec..1b2f86f96743 100644 --- a/include/linux/platform_data/mlxreg.h +++ b/include/linux/platform_data/mlxreg.h @@ -61,6 +61,7 @@ struct mlxreg_hotplug_device { * @reg: attribute register; * @mask: attribute access mask; * @bit: attribute effective bit; + * @capability: attribute capability register; * @mode: access mode; * @np - pointer to node platform associated with attribute; * @hpdev - hotplug device data; @@ -72,6 +73,7 @@ struct mlxreg_core_data { u32 reg; u32 mask; u32 bit; + u32 capability; umode_t mode; struct device_node *np; struct mlxreg_hotplug_device hpdev; -- cgit v1.2.3 From 2e5a662de36a92a95b5939273468b01785dc41ec Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 6 Feb 2019 08:16:51 +0100 Subject: i2c: cbus-gpio: Switch to use GPIO descriptors This augments the CBUS GPIO I2C driver to use GPIO descriptors for clock, sel and data. We drop the platform data that was only used for carrying GPIO numbers and use machine descriptor tables instead. Signed-off-by: Linus Walleij Tested-by: Aaro Koskinen Acked-by: Tony Lindgren Signed-off-by: Wolfram Sang --- arch/arm/mach-omap1/board-nokia770.c | 18 ++++--- drivers/i2c/busses/i2c-cbus-gpio.c | 80 +++++++++++------------------ include/linux/platform_data/i2c-cbus-gpio.h | 27 ---------- 3 files changed, 40 insertions(+), 85 deletions(-) delete mode 100644 include/linux/platform_data/i2c-cbus-gpio.h (limited to 'include/linux/platform_data') diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index eb41db78cd47..10848f573d37 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -25,7 +26,6 @@ #include #include #include -#include #include #include @@ -217,18 +217,19 @@ static inline void nokia770_mmc_init(void) #endif #if IS_ENABLED(CONFIG_I2C_CBUS_GPIO) -static struct i2c_cbus_platform_data nokia770_cbus_data = { - .clk_gpio = OMAP_MPUIO(9), - .dat_gpio = OMAP_MPUIO(10), - .sel_gpio = OMAP_MPUIO(11), +static struct gpiod_lookup_table nokia770_cbus_gpio_table = { + .dev_id = "i2c-cbus-gpio.2", + .table = { + GPIO_LOOKUP_IDX("mpuio", 9, NULL, 0, 0), /* clk */ + GPIO_LOOKUP_IDX("mpuio", 10, NULL, 1, 0), /* dat */ + GPIO_LOOKUP_IDX("mpuio", 11, NULL, 2, 0), /* sel */ + { }, + }, }; static struct platform_device nokia770_cbus_device = { .name = "i2c-cbus-gpio", .id = 2, - .dev = { - .platform_data = &nokia770_cbus_data, - }, }; static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = { @@ -257,6 +258,7 @@ static void __init nokia770_cbus_init(void) nokia770_i2c_board_info_2[1].irq = gpio_to_irq(tahvo_irq_gpio); i2c_register_board_info(2, nokia770_i2c_board_info_2, ARRAY_SIZE(nokia770_i2c_board_info_2)); + gpiod_add_lookup_table(&nokia770_cbus_gpio_table); platform_device_register(&nokia770_cbus_device); } #else /* CONFIG_I2C_CBUS_GPIO */ diff --git a/drivers/i2c/busses/i2c-cbus-gpio.c b/drivers/i2c/busses/i2c-cbus-gpio.c index b4f91e48948a..72df563477b1 100644 --- a/drivers/i2c/busses/i2c-cbus-gpio.c +++ b/drivers/i2c/busses/i2c-cbus-gpio.c @@ -18,16 +18,14 @@ #include #include -#include #include #include #include #include #include -#include +#include #include #include -#include /* * Bit counts are derived from Nokia implementation. These should be checked @@ -39,9 +37,9 @@ struct cbus_host { spinlock_t lock; /* host lock */ struct device *dev; - int clk_gpio; - int dat_gpio; - int sel_gpio; + struct gpio_desc *clk; + struct gpio_desc *dat; + struct gpio_desc *sel; }; /** @@ -51,9 +49,9 @@ struct cbus_host { */ static void cbus_send_bit(struct cbus_host *host, unsigned bit) { - gpio_set_value(host->dat_gpio, bit ? 1 : 0); - gpio_set_value(host->clk_gpio, 1); - gpio_set_value(host->clk_gpio, 0); + gpiod_set_value(host->dat, bit ? 1 : 0); + gpiod_set_value(host->clk, 1); + gpiod_set_value(host->clk, 0); } /** @@ -78,9 +76,9 @@ static int cbus_receive_bit(struct cbus_host *host) { int ret; - gpio_set_value(host->clk_gpio, 1); - ret = gpio_get_value(host->dat_gpio); - gpio_set_value(host->clk_gpio, 0); + gpiod_set_value(host->clk, 1); + ret = gpiod_get_value(host->dat); + gpiod_set_value(host->clk, 0); return ret; } @@ -123,10 +121,10 @@ static int cbus_transfer(struct cbus_host *host, char rw, unsigned dev, spin_lock_irqsave(&host->lock, flags); /* Reset state and start of transfer, SEL stays down during transfer */ - gpio_set_value(host->sel_gpio, 0); + gpiod_set_value(host->sel, 0); /* Set the DAT pin to output */ - gpio_direction_output(host->dat_gpio, 1); + gpiod_direction_output(host->dat, 1); /* Send the device address */ cbus_send_data(host, dev, CBUS_ADDR_BITS); @@ -141,12 +139,12 @@ static int cbus_transfer(struct cbus_host *host, char rw, unsigned dev, cbus_send_data(host, data, 16); ret = 0; } else { - ret = gpio_direction_input(host->dat_gpio); + ret = gpiod_direction_input(host->dat); if (ret) { dev_dbg(host->dev, "failed setting direction\n"); goto out; } - gpio_set_value(host->clk_gpio, 1); + gpiod_set_value(host->clk, 1); ret = cbus_receive_word(host); if (ret < 0) { @@ -156,9 +154,9 @@ static int cbus_transfer(struct cbus_host *host, char rw, unsigned dev, } /* Indicate end of transfer, SEL goes up until next transfer */ - gpio_set_value(host->sel_gpio, 1); - gpio_set_value(host->clk_gpio, 1); - gpio_set_value(host->clk_gpio, 0); + gpiod_set_value(host->sel, 1); + gpiod_set_value(host->clk, 1); + gpiod_set_value(host->clk, 0); out: spin_unlock_irqrestore(&host->lock, flags); @@ -214,7 +212,6 @@ static int cbus_i2c_probe(struct platform_device *pdev) { struct i2c_adapter *adapter; struct cbus_host *chost; - int ret; adapter = devm_kzalloc(&pdev->dev, sizeof(struct i2c_adapter), GFP_KERNEL); @@ -225,22 +222,20 @@ static int cbus_i2c_probe(struct platform_device *pdev) if (!chost) return -ENOMEM; - if (pdev->dev.of_node) { - struct device_node *dnode = pdev->dev.of_node; - if (of_gpio_count(dnode) != 3) - return -ENODEV; - chost->clk_gpio = of_get_gpio(dnode, 0); - chost->dat_gpio = of_get_gpio(dnode, 1); - chost->sel_gpio = of_get_gpio(dnode, 2); - } else if (dev_get_platdata(&pdev->dev)) { - struct i2c_cbus_platform_data *pdata = - dev_get_platdata(&pdev->dev); - chost->clk_gpio = pdata->clk_gpio; - chost->dat_gpio = pdata->dat_gpio; - chost->sel_gpio = pdata->sel_gpio; - } else { + if (gpiod_count(&pdev->dev, NULL) != 3) return -ENODEV; - } + chost->clk = devm_gpiod_get_index(&pdev->dev, NULL, 0, GPIOD_OUT_LOW); + if (IS_ERR(chost->clk)) + return PTR_ERR(chost->clk); + chost->dat = devm_gpiod_get_index(&pdev->dev, NULL, 1, GPIOD_IN); + if (IS_ERR(chost->dat)) + return PTR_ERR(chost->dat); + chost->sel = devm_gpiod_get_index(&pdev->dev, NULL, 2, GPIOD_OUT_HIGH); + if (IS_ERR(chost->sel)) + return PTR_ERR(chost->sel); + gpiod_set_consumer_name(chost->clk, "CBUS clk"); + gpiod_set_consumer_name(chost->dat, "CBUS dat"); + gpiod_set_consumer_name(chost->sel, "CBUS sel"); adapter->owner = THIS_MODULE; adapter->class = I2C_CLASS_HWMON; @@ -254,21 +249,6 @@ static int cbus_i2c_probe(struct platform_device *pdev) spin_lock_init(&chost->lock); chost->dev = &pdev->dev; - ret = devm_gpio_request_one(&pdev->dev, chost->clk_gpio, - GPIOF_OUT_INIT_LOW, "CBUS clk"); - if (ret) - return ret; - - ret = devm_gpio_request_one(&pdev->dev, chost->dat_gpio, GPIOF_IN, - "CBUS data"); - if (ret) - return ret; - - ret = devm_gpio_request_one(&pdev->dev, chost->sel_gpio, - GPIOF_OUT_INIT_HIGH, "CBUS sel"); - if (ret) - return ret; - i2c_set_adapdata(adapter, chost); platform_set_drvdata(pdev, adapter); diff --git a/include/linux/platform_data/i2c-cbus-gpio.h b/include/linux/platform_data/i2c-cbus-gpio.h deleted file mode 100644 index 6faa992a9502..000000000000 --- a/include/linux/platform_data/i2c-cbus-gpio.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * i2c-cbus-gpio.h - CBUS I2C platform_data definition - * - * Copyright (C) 2004-2009 Nokia Corporation - * - * Written by Felipe Balbi and Aaro Koskinen. - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of this - * archive for more details. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __INCLUDE_LINUX_I2C_CBUS_GPIO_H -#define __INCLUDE_LINUX_I2C_CBUS_GPIO_H - -struct i2c_cbus_platform_data { - int dat_gpio; - int clk_gpio; - int sel_gpio; -}; - -#endif /* __INCLUDE_LINUX_I2C_CBUS_GPIO_H */ -- cgit v1.2.3 From 4fa882c9f628b312d697cfcefaa6e973ce8ece3e Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Tue, 7 Aug 2018 12:07:43 +0200 Subject: eeprom: at24: remove at24_platform_data There are no more users of at24_platform_data. Remove the relevant header and modify the driver code to not use it anymore. Signed-off-by: Bartosz Golaszewski --- MAINTAINERS | 1 - drivers/misc/eeprom/at24.c | 162 +++++++++++++++++-------------------- include/linux/platform_data/at24.h | 60 -------------- 3 files changed, 75 insertions(+), 148 deletions(-) delete mode 100644 include/linux/platform_data/at24.h (limited to 'include/linux/platform_data') diff --git a/MAINTAINERS b/MAINTAINERS index 9919840d54cd..d901919dd475 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2503,7 +2503,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git S: Maintained F: Documentation/devicetree/bindings/eeprom/at24.txt F: drivers/misc/eeprom/at24.c -F: include/linux/platform_data/at24.h ATA OVER ETHERNET (AOE) DRIVER M: "Ed L. Cashin" diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index ddfcf4ade7bf..b806a403ca46 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -22,10 +22,24 @@ #include #include #include -#include #include #include +/* Address pointer is 16 bit. */ +#define AT24_FLAG_ADDR16 BIT(7) +/* sysfs-entry will be read-only. */ +#define AT24_FLAG_READONLY BIT(6) +/* sysfs-entry will be world-readable. */ +#define AT24_FLAG_IRUGO BIT(5) +/* Take always 8 addresses (24c00). */ +#define AT24_FLAG_TAKE8ADDR BIT(4) +/* Factory-programmed serial number. */ +#define AT24_FLAG_SERIAL BIT(3) +/* Factory-programmed mac address. */ +#define AT24_FLAG_MAC BIT(2) +/* Does not auto-rollover reads to the next slave address. */ +#define AT24_FLAG_NO_RDROL BIT(1) + /* * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable. * Differences between different vendor product lines (like Atmel AT24C or @@ -107,10 +121,6 @@ module_param_named(write_timeout, at24_write_timeout, uint, 0); MODULE_PARM_DESC(at24_write_timeout, "Time (in ms) to try writes (default 25)"); struct at24_chip_data { - /* - * these fields mirror their equivalents in - * struct at24_platform_data - */ u32 byte_len; u8 flags; }; @@ -471,63 +481,11 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count) return 0; } -static void at24_properties_to_pdata(struct device *dev, - struct at24_platform_data *chip) -{ - int err; - u32 val; - - if (device_property_present(dev, "read-only")) - chip->flags |= AT24_FLAG_READONLY; - if (device_property_present(dev, "no-read-rollover")) - chip->flags |= AT24_FLAG_NO_RDROL; - - err = device_property_read_u32(dev, "address-width", &val); - if (!err) { - switch (val) { - case 8: - if (chip->flags & AT24_FLAG_ADDR16) - dev_warn(dev, "Override address width to be 8, while default is 16\n"); - chip->flags &= ~AT24_FLAG_ADDR16; - break; - case 16: - chip->flags |= AT24_FLAG_ADDR16; - break; - default: - dev_warn(dev, "Bad \"address-width\" property: %u\n", - val); - } - } - - err = device_property_read_u32(dev, "size", &val); - if (!err) - chip->byte_len = val; - - err = device_property_read_u32(dev, "pagesize", &val); - if (!err) { - chip->page_size = val; - } else { - /* - * This is slow, but we can't know all eeproms, so we better - * play safe. Specifying custom eeprom-types via platform_data - * is recommended anyhow. - */ - chip->page_size = 1; - } -} - -static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata) +static const struct at24_chip_data *at24_get_chip_data(struct device *dev) { struct device_node *of_node = dev->of_node; const struct at24_chip_data *cdata; const struct i2c_device_id *id; - struct at24_platform_data *pd; - - pd = dev_get_platdata(dev); - if (pd) { - memcpy(pdata, pd, sizeof(*pdata)); - return 0; - } id = i2c_match_id(at24_ids, to_i2c_client(dev)); @@ -544,13 +502,9 @@ static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata) cdata = acpi_device_get_match_data(dev); if (!cdata) - return -ENODEV; + return ERR_PTR(-ENODEV); - pdata->byte_len = cdata->byte_len; - pdata->flags = cdata->flags; - at24_properties_to_pdata(dev, pdata); - - return 0; + return cdata; } static void at24_remove_dummy_clients(struct at24_data *at24) @@ -619,7 +573,8 @@ static int at24_probe(struct i2c_client *client) { struct regmap_config regmap_config = { }; struct nvmem_config nvmem_config = { }; - struct at24_platform_data pdata = { }; + u32 byte_len, page_size, flags, addrw; + const struct at24_chip_data *cdata; struct device *dev = &client->dev; bool i2c_fn_i2c, i2c_fn_block; unsigned int i, num_addresses; @@ -634,35 +589,72 @@ static int at24_probe(struct i2c_client *client) i2c_fn_block = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_I2C_BLOCK); - err = at24_get_pdata(dev, &pdata); + cdata = at24_get_chip_data(dev); + if (IS_ERR(cdata)) + return PTR_ERR(cdata); + + err = device_property_read_u32(dev, "pagesize", &page_size); if (err) - return err; + /* + * This is slow, but we can't know all eeproms, so we better + * play safe. Specifying custom eeprom-types via platform_data + * is recommended anyhow. + */ + page_size = 1; + + flags = cdata->flags; + if (device_property_present(dev, "read-only")) + flags |= AT24_FLAG_READONLY; + if (device_property_present(dev, "no-read-rollover")) + flags |= AT24_FLAG_NO_RDROL; + + err = device_property_read_u32(dev, "address-width", &addrw); + if (!err) { + switch (addrw) { + case 8: + if (flags & AT24_FLAG_ADDR16) + dev_warn(dev, + "Override address width to be 8, while default is 16\n"); + flags &= ~AT24_FLAG_ADDR16; + break; + case 16: + flags |= AT24_FLAG_ADDR16; + break; + default: + dev_warn(dev, "Bad \"address-width\" property: %u\n", + addrw); + } + } + + err = device_property_read_u32(dev, "size", &byte_len); + if (err) + byte_len = cdata->byte_len; if (!i2c_fn_i2c && !i2c_fn_block) - pdata.page_size = 1; + page_size = 1; - if (!pdata.page_size) { + if (!page_size) { dev_err(dev, "page_size must not be 0!\n"); return -EINVAL; } - if (!is_power_of_2(pdata.page_size)) + if (!is_power_of_2(page_size)) dev_warn(dev, "page_size looks suspicious (no power of 2)!\n"); - if (pdata.flags & AT24_FLAG_TAKE8ADDR) + if (flags & AT24_FLAG_TAKE8ADDR) num_addresses = 8; else - num_addresses = DIV_ROUND_UP(pdata.byte_len, - (pdata.flags & AT24_FLAG_ADDR16) ? 65536 : 256); + num_addresses = DIV_ROUND_UP(byte_len, + (flags & AT24_FLAG_ADDR16) ? 65536 : 256); - if ((pdata.flags & AT24_FLAG_SERIAL) && (pdata.flags & AT24_FLAG_MAC)) { + if ((flags & AT24_FLAG_SERIAL) && (flags & AT24_FLAG_MAC)) { dev_err(dev, "invalid device data - cannot have both AT24_FLAG_SERIAL & AT24_FLAG_MAC."); return -EINVAL; } regmap_config.val_bits = 8; - regmap_config.reg_bits = (pdata.flags & AT24_FLAG_ADDR16) ? 16 : 8; + regmap_config.reg_bits = (flags & AT24_FLAG_ADDR16) ? 16 : 8; regmap_config.disable_locking = true; regmap = devm_regmap_init_i2c(client, ®map_config); @@ -675,11 +667,11 @@ static int at24_probe(struct i2c_client *client) return -ENOMEM; mutex_init(&at24->lock); - at24->byte_len = pdata.byte_len; - at24->page_size = pdata.page_size; - at24->flags = pdata.flags; + at24->byte_len = byte_len; + at24->page_size = page_size; + at24->flags = flags; at24->num_addresses = num_addresses; - at24->offset_adj = at24_get_offset_adj(pdata.flags, pdata.byte_len); + at24->offset_adj = at24_get_offset_adj(flags, byte_len); at24->client[0].client = client; at24->client[0].regmap = regmap; @@ -687,10 +679,10 @@ static int at24_probe(struct i2c_client *client) if (IS_ERR(at24->wp_gpio)) return PTR_ERR(at24->wp_gpio); - writable = !(pdata.flags & AT24_FLAG_READONLY); + writable = !(flags & AT24_FLAG_READONLY); if (writable) { at24->write_max = min_t(unsigned int, - pdata.page_size, at24_io_limit); + page_size, at24_io_limit); if (!i2c_fn_i2c && at24->write_max > I2C_SMBUS_BLOCK_MAX) at24->write_max = I2C_SMBUS_BLOCK_MAX; } @@ -733,7 +725,7 @@ static int at24_probe(struct i2c_client *client) nvmem_config.priv = at24; nvmem_config.stride = 1; nvmem_config.word_size = 1; - nvmem_config.size = pdata.byte_len; + nvmem_config.size = byte_len; at24->nvmem = devm_nvmem_register(dev, &nvmem_config); if (IS_ERR(at24->nvmem)) { @@ -742,13 +734,9 @@ static int at24_probe(struct i2c_client *client) } dev_info(dev, "%u byte %s EEPROM, %s, %u bytes/write\n", - pdata.byte_len, client->name, + byte_len, client->name, writable ? "writable" : "read-only", at24->write_max); - /* export data to kernel code */ - if (pdata.setup) - pdata.setup(at24->nvmem, pdata.context); - return 0; err_clients: diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h deleted file mode 100644 index 63507ff464ee..000000000000 --- a/include/linux/platform_data/at24.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * at24.h - platform_data for the at24 (generic eeprom) driver - * (C) Copyright 2008 by Pengutronix - * (C) Copyright 2012 by Wolfram Sang - * same license as the driver - */ - -#ifndef _LINUX_AT24_H -#define _LINUX_AT24_H - -#include -#include -#include - -/** - * struct at24_platform_data - data to set up at24 (generic eeprom) driver - * @byte_len: size of eeprom in byte - * @page_size: number of byte which can be written in one go - * @flags: tunable options, check AT24_FLAG_* defines - * @setup: an optional callback invoked after eeprom is probed; enables kernel - code to access eeprom via nvmem, see example - * @context: optional parameter passed to setup() - * - * If you set up a custom eeprom type, please double-check the parameters. - * Especially page_size needs extra care, as you risk data loss if your value - * is bigger than what the chip actually supports! - * - * An example in pseudo code for a setup() callback: - * - * void get_mac_addr(struct nvmem_device *nvmem, void *context) - * { - * u8 *mac_addr = ethernet_pdata->mac_addr; - * off_t offset = context; - * - * // Read MAC addr from EEPROM - * if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) - * pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); - * } - * - * This function pointer and context can now be set up in at24_platform_data. - */ - -struct at24_platform_data { - u32 byte_len; /* size (sum of all addr) */ - u16 page_size; /* for writes */ - u8 flags; -#define AT24_FLAG_ADDR16 BIT(7) /* address pointer is 16 bit */ -#define AT24_FLAG_READONLY BIT(6) /* sysfs-entry will be read-only */ -#define AT24_FLAG_IRUGO BIT(5) /* sysfs-entry will be world-readable */ -#define AT24_FLAG_TAKE8ADDR BIT(4) /* take always 8 addresses (24c00) */ -#define AT24_FLAG_SERIAL BIT(3) /* factory-programmed serial number */ -#define AT24_FLAG_MAC BIT(2) /* factory-programmed mac address */ -#define AT24_FLAG_NO_RDROL BIT(1) /* does not auto-rollover reads to */ - /* the next slave address */ - - void (*setup)(struct nvmem_device *nvmem, void *context); - void *context; -}; - -#endif /* _LINUX_AT24_H */ -- cgit v1.2.3 From 2c7e4928b35660e2147d14d5e42849c22f44b55f Mon Sep 17 00:00:00 2001 From: Federico Vaga Date: Thu, 14 Feb 2019 09:51:33 +0100 Subject: i2c: ocores: add SPDX tag It adds the SPDX tag and it removes the old text about the GPLv2. Signed-off-by: Federico Vaga Reviewed-by: Andrew Lunn Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-ocores.c | 5 +---- include/linux/platform_data/i2c-ocores.h | 5 +---- 2 files changed, 2 insertions(+), 8 deletions(-) (limited to 'include/linux/platform_data') diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 5dea7b9ab7e5..78085a88d866 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * i2c-ocores.c: I2C bus driver for OpenCores I2C controller * (https://opencores.org/project/i2c/overview) @@ -6,10 +7,6 @@ * * Support for the GRLIB port of the controller by * Andreas Larsson - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include diff --git a/include/linux/platform_data/i2c-ocores.h b/include/linux/platform_data/i2c-ocores.h index 113d6b12f650..8c416ff8affd 100644 --- a/include/linux/platform_data/i2c-ocores.h +++ b/include/linux/platform_data/i2c-ocores.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * i2c-ocores.h - definitions for the i2c-ocores interface * * Peter Korsgaard - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #ifndef _LINUX_I2C_OCORES_H -- cgit v1.2.3 From 237b5f66e1ed8a58662f29bcd04442953cdb8b55 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Thu, 14 Feb 2019 04:24:50 +0100 Subject: i2c: ocores: Add support for bus clock via platform data Add the I2C bus clock speed to the platform data structure. If not set, default to 100KHz as before. Signed-off-by: Andrew Lunn Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-ocores.c | 5 ++++- include/linux/platform_data/i2c-ocores.h | 1 + 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'include/linux/platform_data') diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 0d90a82a2c03..4eea18689e99 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -628,7 +628,10 @@ static int ocores_i2c_probe(struct platform_device *pdev) i2c->reg_shift = pdata->reg_shift; i2c->reg_io_width = pdata->reg_io_width; i2c->ip_clock_khz = pdata->clock_khz; - i2c->bus_clock_khz = 100; + if (pdata->bus_khz) + i2c->bus_clock_khz = pdata->bus_khz; + else + i2c->bus_clock_khz = 100; } else { ret = ocores_i2c_of_probe(pdev, i2c); if (ret) diff --git a/include/linux/platform_data/i2c-ocores.h b/include/linux/platform_data/i2c-ocores.h index 8c416ff8affd..e6326cbafe59 100644 --- a/include/linux/platform_data/i2c-ocores.h +++ b/include/linux/platform_data/i2c-ocores.h @@ -12,6 +12,7 @@ struct ocores_i2c_platform_data { u32 reg_shift; /* register offset shift value */ u32 reg_io_width; /* register io read/write width */ u32 clock_khz; /* input clock in kHz */ + u32 bus_khz; /* bus clock in kHz */ bool big_endian; /* registers are big endian */ u8 num_devices; /* number of devices in the devices list */ struct i2c_board_info const *devices; /* devices connected to the bus */ -- cgit v1.2.3 From 7b3d4f44abf0e7a1ba762c8a9c99a8b39ee0c8b1 Mon Sep 17 00:00:00 2001 From: Nick Crews Date: Fri, 8 Feb 2019 17:37:17 -0700 Subject: platform/chrome: Add new driver for Wilco EC This EC is an incompatible variant of the typical Chrome OS embedded controller. It uses the same low-level communication and a similar protocol with some significant differences. The EC firmware does not support the same mailbox commands so it is not registered as a cros_ec device type. This commit exports the wilco_ec_mailbox() function so that other modules can use it to communicate with the EC. Signed-off-by: Duncan Laurie Signed-off-by: Nick Crews [Fix the sparse warning: symbol 'wilco_ec_transfer' was not declared] Signed-off-by: Wei Yongjun [Fix Kconfig dependencies for wilco_ec] Reported-by: Randy Dunlap Signed-off-by: Enric Balletbo i Serra --- drivers/platform/chrome/Kconfig | 2 + drivers/platform/chrome/Makefile | 2 + drivers/platform/chrome/wilco_ec/Kconfig | 10 ++ drivers/platform/chrome/wilco_ec/Makefile | 4 + drivers/platform/chrome/wilco_ec/core.c | 104 +++++++++++++ drivers/platform/chrome/wilco_ec/mailbox.c | 237 +++++++++++++++++++++++++++++ include/linux/platform_data/wilco-ec.h | 140 +++++++++++++++++ 7 files changed, 499 insertions(+) create mode 100644 drivers/platform/chrome/wilco_ec/Kconfig create mode 100644 drivers/platform/chrome/wilco_ec/Makefile create mode 100644 drivers/platform/chrome/wilco_ec/core.c create mode 100644 drivers/platform/chrome/wilco_ec/mailbox.c create mode 100644 include/linux/platform_data/wilco-ec.h (limited to 'include/linux/platform_data') diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig index 5e2fde5ff63d..9186d81a51cc 100644 --- a/drivers/platform/chrome/Kconfig +++ b/drivers/platform/chrome/Kconfig @@ -152,4 +152,6 @@ config CROS_EC_SYSFS To compile this driver as a module, choose M here: the module will be called cros_ec_sysfs. +source "drivers/platform/chrome/wilco_ec/Kconfig" + endif # CHROMEOS_PLATFORMS diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile index fdbee501931b..1e2f0029b597 100644 --- a/drivers/platform/chrome/Makefile +++ b/drivers/platform/chrome/Makefile @@ -14,3 +14,5 @@ obj-$(CONFIG_CROS_EC_LIGHTBAR) += cros_ec_lightbar.o obj-$(CONFIG_CROS_EC_VBC) += cros_ec_vbc.o obj-$(CONFIG_CROS_EC_DEBUGFS) += cros_ec_debugfs.o obj-$(CONFIG_CROS_EC_SYSFS) += cros_ec_sysfs.o + +obj-$(CONFIG_WILCO_EC) += wilco_ec/ diff --git a/drivers/platform/chrome/wilco_ec/Kconfig b/drivers/platform/chrome/wilco_ec/Kconfig new file mode 100644 index 000000000000..c6bc4e8f3062 --- /dev/null +++ b/drivers/platform/chrome/wilco_ec/Kconfig @@ -0,0 +1,10 @@ +config WILCO_EC + tristate "ChromeOS Wilco Embedded Controller" + depends on ACPI && X86 && CROS_EC_LPC_MEC + help + If you say Y here, you get support for talking to the ChromeOS + Wilco EC over an eSPI bus. This uses a simple byte-level protocol + with a checksum. + + To compile this driver as a module, choose M here: the + module will be called wilco_ec. diff --git a/drivers/platform/chrome/wilco_ec/Makefile b/drivers/platform/chrome/wilco_ec/Makefile new file mode 100644 index 000000000000..03b32301dc61 --- /dev/null +++ b/drivers/platform/chrome/wilco_ec/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 + +wilco_ec-objs := core.o mailbox.o +obj-$(CONFIG_WILCO_EC) += wilco_ec.o diff --git a/drivers/platform/chrome/wilco_ec/core.c b/drivers/platform/chrome/wilco_ec/core.c new file mode 100644 index 000000000000..20ecc580d108 --- /dev/null +++ b/drivers/platform/chrome/wilco_ec/core.c @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Core driver for Wilco Embedded Controller + * + * Copyright 2018 Google LLC + * + * This is the entry point for the drivers that control the Wilco EC. + * This driver is responsible for several tasks: + * - Initialize the register interface that is used by wilco_ec_mailbox() + * - Create a platform device which is picked up by the debugfs driver + * - Create a platform device which is picked up by the RTC driver + */ + +#include +#include +#include +#include +#include +#include + +#include "../cros_ec_lpc_mec.h" + +#define DRV_NAME "wilco-ec" + +static struct resource *wilco_get_resource(struct platform_device *pdev, + int index) +{ + struct device *dev = &pdev->dev; + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_IO, index); + if (!res) { + dev_dbg(dev, "Couldn't find IO resource %d\n", index); + return res; + } + + return devm_request_region(dev, res->start, resource_size(res), + dev_name(dev)); +} + +static int wilco_ec_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct wilco_ec_device *ec; + + ec = devm_kzalloc(dev, sizeof(*ec), GFP_KERNEL); + if (!ec) + return -ENOMEM; + + platform_set_drvdata(pdev, ec); + ec->dev = dev; + mutex_init(&ec->mailbox_lock); + + /* Largest data buffer size requirement is extended data response */ + ec->data_size = sizeof(struct wilco_ec_response) + + EC_MAILBOX_DATA_SIZE_EXTENDED; + ec->data_buffer = devm_kzalloc(dev, ec->data_size, GFP_KERNEL); + if (!ec->data_buffer) + return -ENOMEM; + + /* Prepare access to IO regions provided by ACPI */ + ec->io_data = wilco_get_resource(pdev, 0); /* Host Data */ + ec->io_command = wilco_get_resource(pdev, 1); /* Host Command */ + ec->io_packet = wilco_get_resource(pdev, 2); /* MEC EMI */ + if (!ec->io_data || !ec->io_command || !ec->io_packet) + return -ENODEV; + + /* Initialize cros_ec register interface for communication */ + cros_ec_lpc_mec_init(ec->io_packet->start, + ec->io_packet->start + EC_MAILBOX_DATA_SIZE); + + return 0; +} + +static int wilco_ec_remove(struct platform_device *pdev) +{ + /* Teardown cros_ec interface */ + cros_ec_lpc_mec_destroy(); + + return 0; +} + +static const struct acpi_device_id wilco_ec_acpi_device_ids[] = { + { "GOOG000C", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, wilco_ec_acpi_device_ids); + +static struct platform_driver wilco_ec_driver = { + .driver = { + .name = DRV_NAME, + .acpi_match_table = wilco_ec_acpi_device_ids, + }, + .probe = wilco_ec_probe, + .remove = wilco_ec_remove, +}; + +module_platform_driver(wilco_ec_driver); + +MODULE_AUTHOR("Nick Crews "); +MODULE_AUTHOR("Duncan Laurie "); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("ChromeOS Wilco Embedded Controller driver"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/platform/chrome/wilco_ec/mailbox.c b/drivers/platform/chrome/wilco_ec/mailbox.c new file mode 100644 index 000000000000..f6ff29a11f1a --- /dev/null +++ b/drivers/platform/chrome/wilco_ec/mailbox.c @@ -0,0 +1,237 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Mailbox interface for Wilco Embedded Controller + * + * Copyright 2018 Google LLC + * + * The Wilco EC is similar to a typical ChromeOS embedded controller. + * It uses the same MEC based low-level communication and a similar + * protocol, but with some important differences. The EC firmware does + * not support the same mailbox commands so it is not registered as a + * cros_ec device type. + * + * Most messages follow a standard format, but there are some exceptions + * and an interface is provided to do direct/raw transactions that do not + * make assumptions about byte placement. + */ + +#include +#include +#include +#include +#include + +#include "../cros_ec_lpc_mec.h" + +/* Version of mailbox interface */ +#define EC_MAILBOX_VERSION 0 + +/* Command to start mailbox transaction */ +#define EC_MAILBOX_START_COMMAND 0xda + +/* Version of EC protocol */ +#define EC_MAILBOX_PROTO_VERSION 3 + +/* Number of header bytes to be counted as data bytes */ +#define EC_MAILBOX_DATA_EXTRA 2 + +/* Maximum timeout */ +#define EC_MAILBOX_TIMEOUT HZ + +/* EC response flags */ +#define EC_CMDR_DATA BIT(0) /* Data ready for host to read */ +#define EC_CMDR_PENDING BIT(1) /* Write pending to EC */ +#define EC_CMDR_BUSY BIT(2) /* EC is busy processing a command */ +#define EC_CMDR_CMD BIT(3) /* Last host write was a command */ + +/** + * wilco_ec_response_timed_out() - Wait for EC response. + * @ec: EC device. + * + * Return: true if EC timed out, false if EC did not time out. + */ +static bool wilco_ec_response_timed_out(struct wilco_ec_device *ec) +{ + unsigned long timeout = jiffies + EC_MAILBOX_TIMEOUT; + + do { + if (!(inb(ec->io_command->start) & + (EC_CMDR_PENDING | EC_CMDR_BUSY))) + return false; + usleep_range(100, 200); + } while (time_before(jiffies, timeout)); + + return true; +} + +/** + * wilco_ec_checksum() - Compute 8-bit checksum over data range. + * @data: Data to checksum. + * @size: Number of bytes to checksum. + * + * Return: 8-bit checksum of provided data. + */ +static u8 wilco_ec_checksum(const void *data, size_t size) +{ + u8 *data_bytes = (u8 *)data; + u8 checksum = 0; + size_t i; + + for (i = 0; i < size; i++) + checksum += data_bytes[i]; + + return checksum; +} + +/** + * wilco_ec_prepare() - Prepare the request structure for the EC. + * @msg: EC message with request information. + * @rq: EC request structure to fill. + */ +static void wilco_ec_prepare(struct wilco_ec_message *msg, + struct wilco_ec_request *rq) +{ + memset(rq, 0, sizeof(*rq)); + + /* Handle messages without trimming bytes from the request */ + if (msg->request_size && msg->flags & WILCO_EC_FLAG_RAW_REQUEST) { + rq->reserved_raw = *(u8 *)msg->request_data; + msg->request_size--; + memmove(msg->request_data, msg->request_data + 1, + msg->request_size); + } + + /* Fill in request packet */ + rq->struct_version = EC_MAILBOX_PROTO_VERSION; + rq->mailbox_id = msg->type; + rq->mailbox_version = EC_MAILBOX_VERSION; + rq->data_size = msg->request_size + EC_MAILBOX_DATA_EXTRA; + rq->command = msg->command; + + /* Checksum header and data */ + rq->checksum = wilco_ec_checksum(rq, sizeof(*rq)); + rq->checksum += wilco_ec_checksum(msg->request_data, msg->request_size); + rq->checksum = -rq->checksum; +} + +/** + * wilco_ec_transfer() - Perform actual data transfer. + * @ec: EC device. + * @msg: EC message data for request and response. + * @rq: Filled in request structure + * + * Context: ec->mailbox_lock should be held while using this function. + * Return: number of bytes received or negative error code on failure. + */ +static int wilco_ec_transfer(struct wilco_ec_device *ec, + struct wilco_ec_message *msg, + struct wilco_ec_request *rq) +{ + struct wilco_ec_response *rs; + u8 checksum; + u8 flag; + size_t size; + + /* Write request header, then data */ + cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE, 0, sizeof(*rq), (u8 *)rq); + cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE, sizeof(*rq), msg->request_size, + msg->request_data); + + /* Start the command */ + outb(EC_MAILBOX_START_COMMAND, ec->io_command->start); + + /* For some commands (eg shutdown) the EC will not respond, that's OK */ + if (msg->flags & WILCO_EC_FLAG_NO_RESPONSE) { + dev_dbg(ec->dev, "EC does not respond to this command\n"); + return 0; + } + + /* Wait for it to complete */ + if (wilco_ec_response_timed_out(ec)) { + dev_dbg(ec->dev, "response timed out\n"); + return -ETIMEDOUT; + } + + /* Check result */ + flag = inb(ec->io_data->start); + if (flag) { + dev_dbg(ec->dev, "bad response: 0x%02x\n", flag); + return -EIO; + } + + if (msg->flags & WILCO_EC_FLAG_EXTENDED_DATA) + size = EC_MAILBOX_DATA_SIZE_EXTENDED; + else + size = EC_MAILBOX_DATA_SIZE; + + /* Read back response */ + rs = ec->data_buffer; + checksum = cros_ec_lpc_io_bytes_mec(MEC_IO_READ, 0, + sizeof(*rs) + size, (u8 *)rs); + if (checksum) { + dev_dbg(ec->dev, "bad packet checksum 0x%02x\n", rs->checksum); + return -EBADMSG; + } + + /* Check that the EC reported success */ + msg->result = rs->result; + if (msg->result) { + dev_dbg(ec->dev, "bad response: 0x%02x\n", msg->result); + return -EBADMSG; + } + + /* Check the returned data size, skipping the header */ + if (rs->data_size != size) { + dev_dbg(ec->dev, "unexpected packet size (%u != %zu)", + rs->data_size, size); + return -EMSGSIZE; + } + + /* Skip 1 response data byte unless specified */ + size = (msg->flags & WILCO_EC_FLAG_RAW_RESPONSE) ? 0 : 1; + if ((ssize_t) rs->data_size - size < msg->response_size) { + dev_dbg(ec->dev, "response data too short (%zd < %zu)", + (ssize_t) rs->data_size - size, msg->response_size); + return -EMSGSIZE; + } + + /* Ignore response data bytes as requested */ + memcpy(msg->response_data, rs->data + size, msg->response_size); + + /* Return actual amount of data received */ + return msg->response_size; +} + +/** + * wilco_ec_mailbox() - Send EC request and receive EC response. + * @ec: EC device. + * @msg: EC message data for request and response. + * + * On entry msg->type, msg->flags, msg->command, msg->request_size, + * msg->response_size, and msg->request_data should all be filled in. + * + * On exit msg->result and msg->response_data will be filled. + * + * Return: number of bytes received or negative error code on failure. + */ +int wilco_ec_mailbox(struct wilco_ec_device *ec, struct wilco_ec_message *msg) +{ + struct wilco_ec_request *rq; + int ret; + + dev_dbg(ec->dev, "cmd=%02x type=%04x flags=%02x rslen=%zu rqlen=%zu\n", + msg->command, msg->type, msg->flags, msg->response_size, + msg->request_size); + + /* Prepare request packet */ + rq = ec->data_buffer; + wilco_ec_prepare(msg, rq); + + mutex_lock(&ec->mailbox_lock); + ret = wilco_ec_transfer(ec, msg, rq); + mutex_unlock(&ec->mailbox_lock); + + return ret; + +} +EXPORT_SYMBOL_GPL(wilco_ec_mailbox); diff --git a/include/linux/platform_data/wilco-ec.h b/include/linux/platform_data/wilco-ec.h new file mode 100644 index 000000000000..0feb4b520a54 --- /dev/null +++ b/include/linux/platform_data/wilco-ec.h @@ -0,0 +1,140 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * ChromeOS Wilco Embedded Controller + * + * Copyright 2018 Google LLC + */ + +#ifndef WILCO_EC_H +#define WILCO_EC_H + +#include +#include + +/* Message flags for using the mailbox() interface */ +#define WILCO_EC_FLAG_NO_RESPONSE BIT(0) /* EC does not respond */ +#define WILCO_EC_FLAG_EXTENDED_DATA BIT(1) /* EC returns 256 data bytes */ +#define WILCO_EC_FLAG_RAW_REQUEST BIT(2) /* Do not trim request data */ +#define WILCO_EC_FLAG_RAW_RESPONSE BIT(3) /* Do not trim response data */ +#define WILCO_EC_FLAG_RAW (WILCO_EC_FLAG_RAW_REQUEST | \ + WILCO_EC_FLAG_RAW_RESPONSE) + +/* Normal commands have a maximum 32 bytes of data */ +#define EC_MAILBOX_DATA_SIZE 32 +/* Extended commands have 256 bytes of response data */ +#define EC_MAILBOX_DATA_SIZE_EXTENDED 256 + +/** + * struct wilco_ec_device - Wilco Embedded Controller handle. + * @dev: Device handle. + * @mailbox_lock: Mutex to ensure one mailbox command at a time. + * @io_command: I/O port for mailbox command. Provided by ACPI. + * @io_data: I/O port for mailbox data. Provided by ACPI. + * @io_packet: I/O port for mailbox packet data. Provided by ACPI. + * @data_buffer: Buffer used for EC communication. The same buffer + * is used to hold the request and the response. + * @data_size: Size of the data buffer used for EC communication. + */ +struct wilco_ec_device { + struct device *dev; + struct mutex mailbox_lock; + struct resource *io_command; + struct resource *io_data; + struct resource *io_packet; + void *data_buffer; + size_t data_size; +}; + +/** + * struct wilco_ec_request - Mailbox request message format. + * @struct_version: Should be %EC_MAILBOX_PROTO_VERSION + * @checksum: Sum of all bytes must be 0. + * @mailbox_id: Mailbox identifier, specifies the command set. + * @mailbox_version: Mailbox interface version %EC_MAILBOX_VERSION + * @reserved: Set to zero. + * @data_size: Length of request, data + last 2 bytes of the header. + * @command: Mailbox command code, unique for each mailbox_id set. + * @reserved_raw: Set to zero for most commands, but is used by + * some command types and for raw commands. + */ +struct wilco_ec_request { + u8 struct_version; + u8 checksum; + u16 mailbox_id; + u8 mailbox_version; + u8 reserved; + u16 data_size; + u8 command; + u8 reserved_raw; +} __packed; + +/** + * struct wilco_ec_response - Mailbox response message format. + * @struct_version: Should be %EC_MAILBOX_PROTO_VERSION + * @checksum: Sum of all bytes must be 0. + * @result: Result code from the EC. Non-zero indicates an error. + * @data_size: Length of the response data buffer. + * @reserved: Set to zero. + * @mbox0: EC returned data at offset 0 is unused (always 0) so this byte + * is treated as part of the header instead of the data. + * @data: Response data buffer. Max size is %EC_MAILBOX_DATA_SIZE_EXTENDED. + */ +struct wilco_ec_response { + u8 struct_version; + u8 checksum; + u16 result; + u16 data_size; + u8 reserved[2]; + u8 mbox0; + u8 data[0]; +} __packed; + +/** + * enum wilco_ec_msg_type - Message type to select a set of command codes. + * @WILCO_EC_MSG_LEGACY: Legacy EC messages for standard EC behavior. + * @WILCO_EC_MSG_PROPERTY: Get/Set/Sync EC controlled NVRAM property. + * @WILCO_EC_MSG_TELEMETRY_SHORT: 32 bytes of telemetry data provided by the EC. + * @WILCO_EC_MSG_TELEMETRY_LONG: 256 bytes of telemetry data provided by the EC. + */ +enum wilco_ec_msg_type { + WILCO_EC_MSG_LEGACY = 0x00f0, + WILCO_EC_MSG_PROPERTY = 0x00f2, + WILCO_EC_MSG_TELEMETRY_SHORT = 0x00f5, + WILCO_EC_MSG_TELEMETRY_LONG = 0x00f6, +}; + +/** + * struct wilco_ec_message - Request and response message. + * @type: Mailbox message type. + * @flags: Message flags, e.g. %WILCO_EC_FLAG_NO_RESPONSE. + * @command: Mailbox command code. + * @result: Result code from the EC. Non-zero indicates an error. + * @request_size: Number of bytes to send to the EC. + * @request_data: Buffer containing the request data. + * @response_size: Number of bytes expected from the EC. + * This is 32 by default and 256 if the flag + * is set for %WILCO_EC_FLAG_EXTENDED_DATA + * @response_data: Buffer containing the response data, should be + * response_size bytes and allocated by caller. + */ +struct wilco_ec_message { + enum wilco_ec_msg_type type; + u8 flags; + u8 command; + u8 result; + size_t request_size; + void *request_data; + size_t response_size; + void *response_data; +}; + +/** + * wilco_ec_mailbox() - Send request to the EC and receive the response. + * @ec: Wilco EC device. + * @msg: Wilco EC message. + * + * Return: Number of bytes received or negative error code on failure. + */ +int wilco_ec_mailbox(struct wilco_ec_device *ec, struct wilco_ec_message *msg); + +#endif /* WILCO_EC_H */ -- cgit v1.2.3 From b787bb126cbcd73754bcbc055ae9f804ac576e4a Mon Sep 17 00:00:00 2001 From: Nick Crews Date: Fri, 8 Feb 2019 17:37:18 -0700 Subject: platform/chrome: wilco_ec: Add support for raw commands in debugfs Add a debugfs attribute that allows sending raw commands to the EC. This is useful for development and debug but should not be enabled in a production environment. To test: Get the EC firmware build date First send the request command > echo 00 f0 38 00 03 00 > raw Then read the result. "12/21/18" is in the middle of the response > cat raw 00 31 32 2f 32 31 2f 31 38 00 00 0f 01 00 01 00 .12/21/18....... Get the EC firmware build date First send the request command > echo 00 f0 38 00 03 00 > raw Then read the result. "12/21/18" is in the middle of the response > cat raw 00 31 32 2f 32 31 2f 31 38 00 00 0f 01 00 01 00 .12/21/18....... Signed-off-by: Duncan Laurie Signed-off-by: Nick Crews [Fix off-by-one error in wilco_ec/debugfs.c] Reported-by: Dan Carpenter Signed-off-by: Enric Balletbo i Serra --- Documentation/ABI/testing/debugfs-wilco-ec | 23 +++ drivers/platform/chrome/wilco_ec/Kconfig | 10 ++ drivers/platform/chrome/wilco_ec/Makefile | 2 + drivers/platform/chrome/wilco_ec/core.c | 14 ++ drivers/platform/chrome/wilco_ec/debugfs.c | 238 +++++++++++++++++++++++++++++ include/linux/platform_data/wilco-ec.h | 2 + 6 files changed, 289 insertions(+) create mode 100644 Documentation/ABI/testing/debugfs-wilco-ec create mode 100644 drivers/platform/chrome/wilco_ec/debugfs.c (limited to 'include/linux/platform_data') diff --git a/Documentation/ABI/testing/debugfs-wilco-ec b/Documentation/ABI/testing/debugfs-wilco-ec new file mode 100644 index 000000000000..f814f112e213 --- /dev/null +++ b/Documentation/ABI/testing/debugfs-wilco-ec @@ -0,0 +1,23 @@ +What: /sys/kernel/debug/wilco_ec/raw +Date: January 2019 +KernelVersion: 5.1 +Description: + Write and read raw mailbox commands to the EC. + + For writing: + Bytes 0-1 indicate the message type: + 00 F0 = Execute Legacy Command + 00 F2 = Read/Write NVRAM Property + Byte 2 provides the command code + Bytes 3+ consist of the data passed in the request + + At least three bytes are required, for the msg type and command, + with additional bytes optional for additional data. + + Example: + // Request EC info type 3 (EC firmware build date) + $ echo 00 f0 38 00 03 00 > raw + // View the result. The decoded ASCII result "12/21/18" is + // included after the raw hex. + $ cat raw + 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00 .12/21/18.8... diff --git a/drivers/platform/chrome/wilco_ec/Kconfig b/drivers/platform/chrome/wilco_ec/Kconfig index c6bc4e8f3062..4a119ced4d0c 100644 --- a/drivers/platform/chrome/wilco_ec/Kconfig +++ b/drivers/platform/chrome/wilco_ec/Kconfig @@ -8,3 +8,13 @@ config WILCO_EC To compile this driver as a module, choose M here: the module will be called wilco_ec. + +config WILCO_EC_DEBUGFS + tristate "Enable raw access to EC via debugfs" + depends on WILCO_EC + help + If you say Y here, you get support for sending raw commands to + the Wilco EC via debugfs. These commands do not do any byte + manipulation and allow for testing arbitrary commands. This + interface is intended for debug only and will not be present + on production devices. diff --git a/drivers/platform/chrome/wilco_ec/Makefile b/drivers/platform/chrome/wilco_ec/Makefile index 03b32301dc61..063e7fb4ea17 100644 --- a/drivers/platform/chrome/wilco_ec/Makefile +++ b/drivers/platform/chrome/wilco_ec/Makefile @@ -2,3 +2,5 @@ wilco_ec-objs := core.o mailbox.o obj-$(CONFIG_WILCO_EC) += wilco_ec.o +wilco_ec_debugfs-objs := debugfs.o +obj-$(CONFIG_WILCO_EC_DEBUGFS) += wilco_ec_debugfs.o diff --git a/drivers/platform/chrome/wilco_ec/core.c b/drivers/platform/chrome/wilco_ec/core.c index 20ecc580d108..af5fd288b63b 100644 --- a/drivers/platform/chrome/wilco_ec/core.c +++ b/drivers/platform/chrome/wilco_ec/core.c @@ -69,11 +69,25 @@ static int wilco_ec_probe(struct platform_device *pdev) cros_ec_lpc_mec_init(ec->io_packet->start, ec->io_packet->start + EC_MAILBOX_DATA_SIZE); + /* + * Register a child device that will be found by the debugfs driver. + * Ignore failure. + */ + ec->debugfs_pdev = platform_device_register_data(dev, + "wilco-ec-debugfs", + PLATFORM_DEVID_AUTO, + NULL, 0); + return 0; } static int wilco_ec_remove(struct platform_device *pdev) { + struct wilco_ec_device *ec = platform_get_drvdata(pdev); + + if (ec->debugfs_pdev) + platform_device_unregister(ec->debugfs_pdev); + /* Teardown cros_ec interface */ cros_ec_lpc_mec_destroy(); diff --git a/drivers/platform/chrome/wilco_ec/debugfs.c b/drivers/platform/chrome/wilco_ec/debugfs.c new file mode 100644 index 000000000000..c090db2cd5be --- /dev/null +++ b/drivers/platform/chrome/wilco_ec/debugfs.c @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * debugfs attributes for Wilco EC + * + * Copyright 2019 Google LLC + * + * There is only one attribute used for debugging, called raw. + * You can write a hexadecimal sentence to raw, and that series of bytes + * will be sent to the EC. Then, you can read the bytes of response + * by reading from raw. + * + * For writing: + * Bytes 0-1 indicate the message type: + * 00 F0 = Execute Legacy Command + * 00 F2 = Read/Write NVRAM Property + * Byte 2 provides the command code + * Bytes 3+ consist of the data passed in the request + * + * When referencing the EC interface spec, byte 2 corresponds to MBOX[0], + * byte 3 corresponds to MBOX[1], etc. + * + * At least three bytes are required, for the msg type and command, + * with additional bytes optional for additional data. + * + * Example: + * // Request EC info type 3 (EC firmware build date) + * $ echo 00 f0 38 00 03 00 > raw + * // View the result. The decoded ASCII result "12/21/18" is + * // included after the raw hex. + * $ cat raw + * 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00 .12/21/18.8... + */ + +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "wilco-ec-debugfs" + +/* The 256 raw bytes will take up more space when represented as a hex string */ +#define FORMATTED_BUFFER_SIZE (EC_MAILBOX_DATA_SIZE_EXTENDED * 4) + +struct wilco_ec_debugfs { + struct wilco_ec_device *ec; + struct dentry *dir; + size_t response_size; + u8 raw_data[EC_MAILBOX_DATA_SIZE_EXTENDED]; + u8 formatted_data[FORMATTED_BUFFER_SIZE]; +}; +static struct wilco_ec_debugfs *debug_info; + +/** + * parse_hex_sentence() - Convert a ascii hex representation into byte array. + * @in: Input buffer of ascii. + * @isize: Length of input buffer. + * @out: Output buffer. + * @osize: Length of output buffer, e.g. max number of bytes to parse. + * + * An valid input is a series of ascii hexadecimal numbers, separated by spaces. + * An example valid input is + * " 00 f2 0 000076 6 0 ff" + * + * If an individual "word" within the hex sentence is longer than MAX_WORD_SIZE, + * then the sentence is illegal, and parsing will fail. + * + * Return: Number of bytes parsed, or negative error code on failure. + */ +static int parse_hex_sentence(const char *in, int isize, u8 *out, int osize) +{ + int n_parsed = 0; + int word_start = 0; + int word_end; + int word_len; + /* Temp buffer for holding a "word" of chars that represents one byte */ + #define MAX_WORD_SIZE 16 + char tmp[MAX_WORD_SIZE + 1]; + u8 byte; + + while (word_start < isize && n_parsed < osize) { + /* Find the start of the next word */ + while (word_start < isize && isspace(in[word_start])) + word_start++; + /* reached the end of the input before next word? */ + if (word_start >= isize) + break; + + /* Find the end of this word */ + word_end = word_start; + while (word_end < isize && !isspace(in[word_end])) + word_end++; + + /* Copy to a tmp NULL terminated string */ + word_len = word_end - word_start; + if (word_len > MAX_WORD_SIZE) + return -EINVAL; + memcpy(tmp, in + word_start, word_len); + tmp[word_len] = '\0'; + + /* + * Convert from hex string, place in output. If fails to parse, + * just return -EINVAL because specific error code is only + * relevant for this one word, returning it would be confusing. + */ + if (kstrtou8(tmp, 16, &byte)) + return -EINVAL; + out[n_parsed++] = byte; + + word_start = word_end; + } + return n_parsed; +} + +/* The message type takes up two bytes*/ +#define TYPE_AND_DATA_SIZE ((EC_MAILBOX_DATA_SIZE) + 2) + +static ssize_t raw_write(struct file *file, const char __user *user_buf, + size_t count, loff_t *ppos) +{ + char *buf = debug_info->formatted_data; + struct wilco_ec_message msg; + u8 request_data[TYPE_AND_DATA_SIZE]; + ssize_t kcount; + int ret; + + if (count > FORMATTED_BUFFER_SIZE) + return -EINVAL; + + kcount = simple_write_to_buffer(buf, FORMATTED_BUFFER_SIZE, ppos, + user_buf, count); + if (kcount < 0) + return kcount; + + ret = parse_hex_sentence(buf, kcount, request_data, TYPE_AND_DATA_SIZE); + if (ret < 0) + return ret; + /* Need at least two bytes for message type and one for command */ + if (ret < 3) + return -EINVAL; + + /* Clear response data buffer */ + memset(debug_info->raw_data, '\0', EC_MAILBOX_DATA_SIZE_EXTENDED); + + msg.type = request_data[0] << 8 | request_data[1]; + msg.flags = WILCO_EC_FLAG_RAW; + msg.command = request_data[2]; + msg.request_data = ret > 3 ? request_data + 3 : 0; + msg.request_size = ret - 3; + msg.response_data = debug_info->raw_data; + msg.response_size = EC_MAILBOX_DATA_SIZE; + + /* Telemetry commands use extended response data */ + if (msg.type == WILCO_EC_MSG_TELEMETRY_LONG) { + msg.flags |= WILCO_EC_FLAG_EXTENDED_DATA; + msg.response_size = EC_MAILBOX_DATA_SIZE_EXTENDED; + } + + ret = wilco_ec_mailbox(debug_info->ec, &msg); + if (ret < 0) + return ret; + debug_info->response_size = ret; + + return count; +} + +static ssize_t raw_read(struct file *file, char __user *user_buf, size_t count, + loff_t *ppos) +{ + int fmt_len = 0; + + if (debug_info->response_size) { + fmt_len = hex_dump_to_buffer(debug_info->raw_data, + debug_info->response_size, + 16, 1, debug_info->formatted_data, + FORMATTED_BUFFER_SIZE, true); + /* Only return response the first time it is read */ + debug_info->response_size = 0; + } + + return simple_read_from_buffer(user_buf, count, ppos, + debug_info->formatted_data, fmt_len); +} + +static const struct file_operations fops_raw = { + .owner = THIS_MODULE, + .read = raw_read, + .write = raw_write, + .llseek = no_llseek, +}; + +/** + * wilco_ec_debugfs_probe() - Create the debugfs node + * @pdev: The platform device, probably created in core.c + * + * Try to create a debugfs node. If it fails, then we don't want to change + * behavior at all, this is for debugging after all. Just fail silently. + * + * Return: 0 always. + */ +static int wilco_ec_debugfs_probe(struct platform_device *pdev) +{ + struct wilco_ec_device *ec = dev_get_drvdata(pdev->dev.parent); + + debug_info = devm_kzalloc(&pdev->dev, sizeof(*debug_info), GFP_KERNEL); + if (!debug_info) + return 0; + debug_info->ec = ec; + debug_info->dir = debugfs_create_dir("wilco_ec", NULL); + if (!debug_info->dir) + return 0; + debugfs_create_file("raw", 0644, debug_info->dir, NULL, &fops_raw); + + return 0; +} + +static int wilco_ec_debugfs_remove(struct platform_device *pdev) +{ + debugfs_remove_recursive(debug_info->dir); + + return 0; +} + +static struct platform_driver wilco_ec_debugfs_driver = { + .driver = { + .name = DRV_NAME, + }, + .probe = wilco_ec_debugfs_probe, + .remove = wilco_ec_debugfs_remove, +}; + +module_platform_driver(wilco_ec_debugfs_driver); + +MODULE_ALIAS("platform:" DRV_NAME); +MODULE_AUTHOR("Nick Crews "); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Wilco EC debugfs driver"); diff --git a/include/linux/platform_data/wilco-ec.h b/include/linux/platform_data/wilco-ec.h index 0feb4b520a54..5344975afa1a 100644 --- a/include/linux/platform_data/wilco-ec.h +++ b/include/linux/platform_data/wilco-ec.h @@ -34,6 +34,7 @@ * @data_buffer: Buffer used for EC communication. The same buffer * is used to hold the request and the response. * @data_size: Size of the data buffer used for EC communication. + * @debugfs_pdev: The child platform_device used by the debugfs sub-driver. */ struct wilco_ec_device { struct device *dev; @@ -43,6 +44,7 @@ struct wilco_ec_device { struct resource *io_packet; void *data_buffer; size_t data_size; + struct platform_device *debugfs_pdev; }; /** -- cgit v1.2.3 From 0d2f2a3da1f2a9ebeb66bb03073dd149fccf1bdd Mon Sep 17 00:00:00 2001 From: Nick Crews Date: Fri, 8 Feb 2019 17:37:19 -0700 Subject: platform/chrome: wilco_ec: Add RTC driver This Embedded Controller has an internal RTC that is exposed as a standard RTC class driver with read/write functionality. The driver is added to the drivers/rtc/ so that the maintainer of that directory will be able to comment on this change, as that maintainer is the expert on this system. In addition, the driver code is called indirectly after a corresponding device is registered from core.c, as opposed to core.c registering the driver callbacks directly. To test: > hwclock --show --rtc /dev/rtc1 2007-12-31 16:01:20.460959-08:00 > hwclock --systohc --rtc /dev/rtc1 > hwclock --show --rtc /dev/rtc1 2018-11-29 17:08:00.780793-08:00 > hwclock --show --rtc /dev/rtc1 2007-12-31 16:01:20.460959-08:00 > hwclock --systohc --rtc /dev/rtc1 > hwclock --show --rtc /dev/rtc1 2018-11-29 17:08:00.780793-08:00 Signed-off-by: Duncan Laurie Signed-off-by: Nick Crews Acked-by: Alexandre Belloni [Fix the sparse warning: symbol 'wilco_ec_rtc_read/write' was not declared] Signed-off-by: Wei Yongjun Signed-off-by: Enric Balletbo i Serra --- drivers/platform/chrome/wilco_ec/core.c | 18 ++++ drivers/rtc/Kconfig | 11 ++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-wilco-ec.c | 177 ++++++++++++++++++++++++++++++++ include/linux/platform_data/wilco-ec.h | 2 + 5 files changed, 209 insertions(+) create mode 100644 drivers/rtc/rtc-wilco-ec.c (limited to 'include/linux/platform_data') diff --git a/drivers/platform/chrome/wilco_ec/core.c b/drivers/platform/chrome/wilco_ec/core.c index af5fd288b63b..05e1e2be1c91 100644 --- a/drivers/platform/chrome/wilco_ec/core.c +++ b/drivers/platform/chrome/wilco_ec/core.c @@ -42,6 +42,7 @@ static int wilco_ec_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct wilco_ec_device *ec; + int ret; ec = devm_kzalloc(dev, sizeof(*ec), GFP_KERNEL); if (!ec) @@ -78,13 +79,30 @@ static int wilco_ec_probe(struct platform_device *pdev) PLATFORM_DEVID_AUTO, NULL, 0); + /* Register a child device that will be found by the RTC driver. */ + ec->rtc_pdev = platform_device_register_data(dev, "rtc-wilco-ec", + PLATFORM_DEVID_AUTO, + NULL, 0); + if (IS_ERR(ec->rtc_pdev)) { + dev_err(dev, "Failed to create RTC platform device\n"); + ret = PTR_ERR(ec->rtc_pdev); + goto unregister_debugfs; + } + return 0; + +unregister_debugfs: + if (ec->debugfs_pdev) + platform_device_unregister(ec->debugfs_pdev); + cros_ec_lpc_mec_destroy(); + return ret; } static int wilco_ec_remove(struct platform_device *pdev) { struct wilco_ec_device *ec = platform_get_drvdata(pdev); + platform_device_unregister(ec->rtc_pdev); if (ec->debugfs_pdev) platform_device_unregister(ec->debugfs_pdev); diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 225b0b8516f3..d5063c791515 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -1814,4 +1814,15 @@ config RTC_DRV_GOLDFISH Goldfish is a code name for the virtual platform developed by Google for Android emulation. +config RTC_DRV_WILCO_EC + tristate "Wilco EC RTC" + depends on WILCO_EC + default m + help + If you say yes here, you get read/write support for the Real Time + Clock on the Wilco Embedded Controller (Wilco is a kind of Chromebook) + + This can also be built as a module. If so, the module will + be named "rtc_wilco_ec". + endif # RTC_CLASS diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index df022d820bee..6255ea78da25 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -172,6 +172,7 @@ obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o obj-$(CONFIG_RTC_DRV_VRTC) += rtc-mrst.o obj-$(CONFIG_RTC_DRV_VT8500) += rtc-vt8500.o +obj-$(CONFIG_RTC_DRV_WILCO_EC) += rtc-wilco-ec.o obj-$(CONFIG_RTC_DRV_WM831X) += rtc-wm831x.o obj-$(CONFIG_RTC_DRV_WM8350) += rtc-wm8350.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o diff --git a/drivers/rtc/rtc-wilco-ec.c b/drivers/rtc/rtc-wilco-ec.c new file mode 100644 index 000000000000..e62bda0cb53e --- /dev/null +++ b/drivers/rtc/rtc-wilco-ec.c @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * RTC interface for Wilco Embedded Controller with R/W abilities + * + * Copyright 2018 Google LLC + * + * The corresponding platform device is typically registered in + * drivers/platform/chrome/wilco_ec/core.c + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define EC_COMMAND_CMOS 0x7c +#define EC_CMOS_TOD_WRITE 0x02 +#define EC_CMOS_TOD_READ 0x08 + +/** + * struct ec_rtc_read - Format of RTC returned by EC. + * @second: Second value (0..59) + * @minute: Minute value (0..59) + * @hour: Hour value (0..23) + * @day: Day value (1..31) + * @month: Month value (1..12) + * @year: Year value (full year % 100) + * @century: Century value (full year / 100) + * + * All values are presented in binary (not BCD). + */ +struct ec_rtc_read { + u8 second; + u8 minute; + u8 hour; + u8 day; + u8 month; + u8 year; + u8 century; +} __packed; + +/** + * struct ec_rtc_write - Format of RTC sent to the EC. + * @param: EC_CMOS_TOD_WRITE + * @century: Century value (full year / 100) + * @year: Year value (full year % 100) + * @month: Month value (1..12) + * @day: Day value (1..31) + * @hour: Hour value (0..23) + * @minute: Minute value (0..59) + * @second: Second value (0..59) + * @weekday: Day of the week (0=Saturday) + * + * All values are presented in BCD. + */ +struct ec_rtc_write { + u8 param; + u8 century; + u8 year; + u8 month; + u8 day; + u8 hour; + u8 minute; + u8 second; + u8 weekday; +} __packed; + +static int wilco_ec_rtc_read(struct device *dev, struct rtc_time *tm) +{ + struct wilco_ec_device *ec = dev_get_drvdata(dev->parent); + u8 param = EC_CMOS_TOD_READ; + struct ec_rtc_read rtc; + struct wilco_ec_message msg = { + .type = WILCO_EC_MSG_LEGACY, + .flags = WILCO_EC_FLAG_RAW_RESPONSE, + .command = EC_COMMAND_CMOS, + .request_data = ¶m, + .request_size = sizeof(param), + .response_data = &rtc, + .response_size = sizeof(rtc), + }; + int ret; + + ret = wilco_ec_mailbox(ec, &msg); + if (ret < 0) + return ret; + + tm->tm_sec = rtc.second; + tm->tm_min = rtc.minute; + tm->tm_hour = rtc.hour; + tm->tm_mday = rtc.day; + tm->tm_mon = rtc.month - 1; + tm->tm_year = rtc.year + (rtc.century * 100) - 1900; + tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year); + + /* Don't compute day of week, we don't need it. */ + tm->tm_wday = -1; + + return 0; +} + +static int wilco_ec_rtc_write(struct device *dev, struct rtc_time *tm) +{ + struct wilco_ec_device *ec = dev_get_drvdata(dev->parent); + struct ec_rtc_write rtc; + struct wilco_ec_message msg = { + .type = WILCO_EC_MSG_LEGACY, + .flags = WILCO_EC_FLAG_RAW_RESPONSE, + .command = EC_COMMAND_CMOS, + .request_data = &rtc, + .request_size = sizeof(rtc), + }; + int year = tm->tm_year + 1900; + /* + * Convert from 0=Sunday to 0=Saturday for the EC + * We DO need to set weekday because the EC controls battery charging + * schedules that depend on the day of the week. + */ + int wday = tm->tm_wday == 6 ? 0 : tm->tm_wday + 1; + int ret; + + rtc.param = EC_CMOS_TOD_WRITE; + rtc.century = bin2bcd(year / 100); + rtc.year = bin2bcd(year % 100); + rtc.month = bin2bcd(tm->tm_mon + 1); + rtc.day = bin2bcd(tm->tm_mday); + rtc.hour = bin2bcd(tm->tm_hour); + rtc.minute = bin2bcd(tm->tm_min); + rtc.second = bin2bcd(tm->tm_sec); + rtc.weekday = bin2bcd(wday); + + ret = wilco_ec_mailbox(ec, &msg); + if (ret < 0) + return ret; + + return 0; +} + +static const struct rtc_class_ops wilco_ec_rtc_ops = { + .read_time = wilco_ec_rtc_read, + .set_time = wilco_ec_rtc_write, +}; + +static int wilco_ec_rtc_probe(struct platform_device *pdev) +{ + struct rtc_device *rtc; + + rtc = devm_rtc_allocate_device(&pdev->dev); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + rtc->ops = &wilco_ec_rtc_ops; + /* EC only supports this century */ + rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; + rtc->range_max = RTC_TIMESTAMP_END_2099; + rtc->owner = THIS_MODULE; + + return rtc_register_device(rtc); +} + +static struct platform_driver wilco_ec_rtc_driver = { + .driver = { + .name = "rtc-wilco-ec", + }, + .probe = wilco_ec_rtc_probe, +}; + +module_platform_driver(wilco_ec_rtc_driver); + +MODULE_ALIAS("platform:rtc-wilco-ec"); +MODULE_AUTHOR("Nick Crews "); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Wilco EC RTC driver"); diff --git a/include/linux/platform_data/wilco-ec.h b/include/linux/platform_data/wilco-ec.h index 5344975afa1a..446473a46b88 100644 --- a/include/linux/platform_data/wilco-ec.h +++ b/include/linux/platform_data/wilco-ec.h @@ -35,6 +35,7 @@ * is used to hold the request and the response. * @data_size: Size of the data buffer used for EC communication. * @debugfs_pdev: The child platform_device used by the debugfs sub-driver. + * @rtc_pdev: The child platform_device used by the RTC sub-driver. */ struct wilco_ec_device { struct device *dev; @@ -45,6 +46,7 @@ struct wilco_ec_device { void *data_buffer; size_t data_size; struct platform_device *debugfs_pdev; + struct platform_device *rtc_pdev; }; /** -- cgit v1.2.3 From a9443a63283ae7eb78f735341da22bc3a69a464d Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 18 Feb 2019 22:34:15 +0300 Subject: clk: x86: Move clk-lpss.h to platform_data/x86 clk-lpss.h is solely x86 related header. Move it to correct folder. Signed-off-by: Andy Shevchenko Acked-by: Rafael J. Wysocki Signed-off-by: Stephen Boyd --- drivers/acpi/acpi_lpss.c | 2 +- drivers/clk/x86/clk-lpt.c | 2 +- include/linux/platform_data/clk-lpss.h | 23 ----------------------- include/linux/platform_data/x86/clk-lpss.h | 23 +++++++++++++++++++++++ 4 files changed, 25 insertions(+), 25 deletions(-) delete mode 100644 include/linux/platform_data/clk-lpss.h create mode 100644 include/linux/platform_data/x86/clk-lpss.h (limited to 'include/linux/platform_data') diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index 5f94c35d165f..1e2a10a06b9d 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/clk/x86/clk-lpt.c b/drivers/clk/x86/clk-lpt.c index 6b40eb89ae19..68bd3abaef2c 100644 --- a/drivers/clk/x86/clk-lpt.c +++ b/drivers/clk/x86/clk-lpt.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include static int lpt_clk_probe(struct platform_device *pdev) diff --git a/include/linux/platform_data/clk-lpss.h b/include/linux/platform_data/clk-lpss.h deleted file mode 100644 index 23901992b9dd..000000000000 --- a/include/linux/platform_data/clk-lpss.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Intel Low Power Subsystem clocks. - * - * Copyright (C) 2013, Intel Corporation - * Authors: Mika Westerberg - * Rafael J. Wysocki - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __CLK_LPSS_H -#define __CLK_LPSS_H - -struct lpss_clk_data { - const char *name; - struct clk *clk; -}; - -extern int lpt_clk_init(void); - -#endif /* __CLK_LPSS_H */ diff --git a/include/linux/platform_data/x86/clk-lpss.h b/include/linux/platform_data/x86/clk-lpss.h new file mode 100644 index 000000000000..23901992b9dd --- /dev/null +++ b/include/linux/platform_data/x86/clk-lpss.h @@ -0,0 +1,23 @@ +/* + * Intel Low Power Subsystem clocks. + * + * Copyright (C) 2013, Intel Corporation + * Authors: Mika Westerberg + * Rafael J. Wysocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __CLK_LPSS_H +#define __CLK_LPSS_H + +struct lpss_clk_data { + const char *name; + struct clk *clk; +}; + +extern int lpt_clk_init(void); + +#endif /* __CLK_LPSS_H */ -- cgit v1.2.3 From e09d168f13f0d63df7fe095d52be04c16cbe1cef Mon Sep 17 00:00:00 2001 From: "Enrico Weigelt, metux IT consult" Date: Fri, 22 Feb 2019 10:54:15 +0100 Subject: gpio: AMD G-Series PCH gpio driver GPIO platform driver for the AMD G-series PCH (eg. on GX-412TC) This driver doesn't registers itself automatically, as it needs to be provided with platform specific configuration, provided by some board driver setup code. Didn't implement oftree probing yet, as it's rarely found on x86. Cc: linux-gpio@vger.kernel.org Cc: linus.walleij@linaro.org Cc: bgolaszewski@baylibre.com Cc: dvhart@infradead.org Cc: platform-driver-x86@vger.kernel.org Reviewed-by: Andy Shevchenko Signed-off-by: Enrico Weigelt, metux IT consult Signed-off-by: Linus Walleij --- MAINTAINERS | 7 + drivers/gpio/Kconfig | 9 ++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-amd-fch.c | 185 ++++++++++++++++++++++++ include/linux/platform_data/gpio/gpio-amd-fch.h | 46 ++++++ 5 files changed, 248 insertions(+) create mode 100644 drivers/gpio/gpio-amd-fch.c create mode 100644 include/linux/platform_data/gpio/gpio-amd-fch.h (limited to 'include/linux/platform_data') diff --git a/MAINTAINERS b/MAINTAINERS index 9919840d54cd..5e4135c78862 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -766,6 +766,13 @@ S: Supported F: Documentation/hwmon/fam15h_power F: drivers/hwmon/fam15h_power.c +AMD FCH GPIO DRIVER +M: Enrico Weigelt, metux IT consult +L: linux-gpio@vger.kernel.org +S: Maintained +F: drivers/gpio/gpio-amd-fch.c +F: include/linux/platform_data/gpio/gpio-amd-fch.h + AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER L: linux-geode@lists.infradead.org (moderated for non-subscribers) S: Orphan diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 486d9de2716a..3f50526a771f 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -655,6 +655,15 @@ config GPIO_LOONGSON1 help Say Y or M here to support GPIO on Loongson1 SoCs. +config GPIO_AMD_FCH + tristate "GPIO support for AMD Fusion Controller Hub (G-series SOCs)" + help + This option enables driver for GPIO on AMDs Fusion Controller Hub, + as found on G-series SOCs (eg. GX-412TC) + + Note: This driver doesn't registers itself automatically, as it + needs to be provided with platform specific configuration. + (See eg. CONFIG_PCENGINES_APU2.) endmenu menu "Port-mapped I/O GPIO drivers" diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 9655927a3dcf..54d55274b93a 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o obj-$(CONFIG_GPIO_ALTERA) += gpio-altera.o obj-$(CONFIG_GPIO_ALTERA_A10SR) += gpio-altera-a10sr.o +obj-$(CONFIG_GPIO_AMD_FCH) += gpio-amd-fch.o obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o diff --git a/drivers/gpio/gpio-amd-fch.c b/drivers/gpio/gpio-amd-fch.c new file mode 100644 index 000000000000..3b4fdce325c1 --- /dev/null +++ b/drivers/gpio/gpio-amd-fch.c @@ -0,0 +1,185 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/* + * GPIO driver for the AMD G series FCH (eg. GX-412TC) + * + * Copyright (C) 2018 metux IT consult + * Author: Enrico Weigelt, metux IT consult + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define AMD_FCH_MMIO_BASE 0xFED80000 +#define AMD_FCH_GPIO_BANK0_BASE 0x1500 +#define AMD_FCH_GPIO_SIZE 0x0300 + +#define AMD_FCH_GPIO_FLAG_DIRECTION BIT(23) +#define AMD_FCH_GPIO_FLAG_WRITE BIT(22) +#define AMD_FCH_GPIO_FLAG_READ BIT(16) + +static const struct resource amd_fch_gpio_iores = + DEFINE_RES_MEM_NAMED( + AMD_FCH_MMIO_BASE + AMD_FCH_GPIO_BANK0_BASE, + AMD_FCH_GPIO_SIZE, + "amd-fch-gpio-iomem"); + +struct amd_fch_gpio_priv { + struct platform_device *pdev; + struct gpio_chip gc; + void __iomem *base; + struct amd_fch_gpio_pdata *pdata; + spinlock_t lock; +}; + +static void *amd_fch_gpio_addr(struct amd_fch_gpio_priv *priv, + unsigned int gpio) +{ + return priv->base + priv->pdata->gpio_reg[gpio]*sizeof(u32); +} + +static int amd_fch_gpio_direction_input(struct gpio_chip *gc, + unsigned int offset) +{ + unsigned long flags; + struct amd_fch_gpio_priv *priv = gpiochip_get_data(gc); + void *ptr = amd_fch_gpio_addr(priv, offset); + + spin_lock_irqsave(&priv->lock, flags); + writel_relaxed(readl_relaxed(ptr) & ~AMD_FCH_GPIO_FLAG_DIRECTION, ptr); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int amd_fch_gpio_direction_output(struct gpio_chip *gc, + unsigned int gpio, int value) +{ + unsigned long flags; + struct amd_fch_gpio_priv *priv = gpiochip_get_data(gc); + void *ptr = amd_fch_gpio_addr(priv, gpio); + + spin_lock_irqsave(&priv->lock, flags); + writel_relaxed(readl_relaxed(ptr) | AMD_FCH_GPIO_FLAG_DIRECTION, ptr); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int amd_fch_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio) +{ + int ret; + unsigned long flags; + struct amd_fch_gpio_priv *priv = gpiochip_get_data(gc); + void *ptr = amd_fch_gpio_addr(priv, gpio); + + spin_lock_irqsave(&priv->lock, flags); + ret = (readl_relaxed(ptr) & AMD_FCH_GPIO_FLAG_DIRECTION); + spin_unlock_irqrestore(&priv->lock, flags); + + return ret; +} + +static void amd_fch_gpio_set(struct gpio_chip *gc, + unsigned int gpio, int value) +{ + unsigned long flags; + struct amd_fch_gpio_priv *priv = gpiochip_get_data(gc); + void *ptr = amd_fch_gpio_addr(priv, gpio); + u32 mask; + + spin_lock_irqsave(&priv->lock, flags); + + mask = readl_relaxed(ptr); + if (value) + mask |= AMD_FCH_GPIO_FLAG_WRITE; + else + mask &= ~AMD_FCH_GPIO_FLAG_WRITE; + writel_relaxed(mask, ptr); + + spin_unlock_irqrestore(&priv->lock, flags); +} + +static int amd_fch_gpio_get(struct gpio_chip *gc, + unsigned int offset) +{ + unsigned long flags; + int ret; + struct amd_fch_gpio_priv *priv = gpiochip_get_data(gc); + void *ptr = amd_fch_gpio_addr(priv, offset); + + spin_lock_irqsave(&priv->lock, flags); + ret = (readl_relaxed(ptr) & AMD_FCH_GPIO_FLAG_READ); + spin_unlock_irqrestore(&priv->lock, flags); + + return ret; +} + +static int amd_fch_gpio_request(struct gpio_chip *chip, + unsigned int gpio_pin) +{ + return 0; +} + +static int amd_fch_gpio_probe(struct platform_device *pdev) +{ + struct amd_fch_gpio_priv *priv; + struct amd_fch_gpio_pdata *pdata; + + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(&pdev->dev, "no platform_data\n"); + return -ENOENT; + } + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->pdata = pdata; + priv->pdev = pdev; + + priv->gc.owner = THIS_MODULE; + priv->gc.parent = &pdev->dev; + priv->gc.label = dev_name(&pdev->dev); + priv->gc.ngpio = priv->pdata->gpio_num; + priv->gc.names = priv->pdata->gpio_names; + priv->gc.base = -1; + priv->gc.request = amd_fch_gpio_request; + priv->gc.direction_input = amd_fch_gpio_direction_input; + priv->gc.direction_output = amd_fch_gpio_direction_output; + priv->gc.get_direction = amd_fch_gpio_get_direction; + priv->gc.get = amd_fch_gpio_get; + priv->gc.set = amd_fch_gpio_set; + + spin_lock_init(&priv->lock); + + priv->base = devm_ioremap_resource(&pdev->dev, &amd_fch_gpio_iores); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + platform_set_drvdata(pdev, priv); + + return devm_gpiochip_add_data(&pdev->dev, &priv->gc, priv); +} + +static struct platform_driver amd_fch_gpio_driver = { + .driver = { + .name = AMD_FCH_GPIO_DRIVER_NAME, + }, + .probe = amd_fch_gpio_probe, +}; + +module_platform_driver(amd_fch_gpio_driver); + +MODULE_AUTHOR("Enrico Weigelt, metux IT consult "); +MODULE_DESCRIPTION("AMD G-series FCH GPIO driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" AMD_FCH_GPIO_DRIVER_NAME); diff --git a/include/linux/platform_data/gpio/gpio-amd-fch.h b/include/linux/platform_data/gpio/gpio-amd-fch.h new file mode 100644 index 000000000000..a867637e172d --- /dev/null +++ b/include/linux/platform_data/gpio/gpio-amd-fch.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL+ */ + +/* + * AMD FCH gpio driver platform-data + * + * Copyright (C) 2018 metux IT consult + * Author: Enrico Weigelt + * + */ + +#ifndef __LINUX_PLATFORM_DATA_GPIO_AMD_FCH_H +#define __LINUX_PLATFORM_DATA_GPIO_AMD_FCH_H + +#define AMD_FCH_GPIO_DRIVER_NAME "gpio_amd_fch" + +/* + * gpio register index definitions + */ +#define AMD_FCH_GPIO_REG_GPIO49 0x40 +#define AMD_FCH_GPIO_REG_GPIO50 0x41 +#define AMD_FCH_GPIO_REG_GPIO51 0x42 +#define AMD_FCH_GPIO_REG_GPIO59_DEVSLP0 0x43 +#define AMD_FCH_GPIO_REG_GPIO57 0x44 +#define AMD_FCH_GPIO_REG_GPIO58 0x45 +#define AMD_FCH_GPIO_REG_GPIO59_DEVSLP1 0x46 +#define AMD_FCH_GPIO_REG_GPIO64 0x47 +#define AMD_FCH_GPIO_REG_GPIO68 0x48 +#define AMD_FCH_GPIO_REG_GPIO66_SPKR 0x5B +#define AMD_FCH_GPIO_REG_GPIO71 0x4D +#define AMD_FCH_GPIO_REG_GPIO32_GE1 0x59 +#define AMD_FCH_GPIO_REG_GPIO33_GE2 0x5A +#define AMT_FCH_GPIO_REG_GEVT22 0x09 + +/* + * struct amd_fch_gpio_pdata - GPIO chip platform data + * @gpio_num: number of entries + * @gpio_reg: array of gpio registers + * @gpio_names: array of gpio names + */ +struct amd_fch_gpio_pdata { + int gpio_num; + int *gpio_reg; + const char * const *gpio_names; +}; + +#endif /* __LINUX_PLATFORM_DATA_GPIO_AMD_FCH_H */ -- cgit v1.2.3 From de7b7dca8735f720793dae8ad818091309979c39 Mon Sep 17 00:00:00 2001 From: "Angus Ainslie (Purism)" Date: Mon, 28 Jan 2019 09:03:22 -0700 Subject: dmaengine: imx-sdma: add a test for imx8mq multi sdma devices On i.mx8mq, there are two sdma instances, and the common dma framework will get a channel dynamically from any available sdma instance whether it's the first sdma device or the second sdma device. Some IPs like SAI only work with sdma2 not sdma1. To make sure the sdma channel is from the correct sdma device, use the node pointer to match. Signed-off-by: Angus Ainslie (Purism) Reviewed-by: Lucas Stach Tested-by: Daniel Baluta Signed-off-by: Vinod Koul --- drivers/dma/imx-sdma.c | 6 ++++++ include/linux/platform_data/dma-imx.h | 1 + 2 files changed, 7 insertions(+) (limited to 'include/linux/platform_data') diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index fc8bc80617d8..8fb0cd293b54 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1913,11 +1913,16 @@ disable_clk_ipg: static bool sdma_filter_fn(struct dma_chan *chan, void *fn_param) { struct sdma_channel *sdmac = to_sdma_chan(chan); + struct sdma_engine *sdma = sdmac->sdma; struct imx_dma_data *data = fn_param; if (!imx_dma_is_general_purpose(chan)) return false; + /* return false if it's not the right device */ + if (sdma->dev->of_node != data->of_node) + return false; + sdmac->data = *data; chan->private = &sdmac->data; @@ -1945,6 +1950,7 @@ static struct dma_chan *sdma_xlate(struct of_phandle_args *dma_spec, * be set to sdmac->event_id1. */ data.dma_request2 = 0; + data.of_node = ofdma->of_node; return dma_request_channel(mask, sdma_filter_fn, &data); } diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h index 7d964e787299..9daea8d42a10 100644 --- a/include/linux/platform_data/dma-imx.h +++ b/include/linux/platform_data/dma-imx.h @@ -55,6 +55,7 @@ struct imx_dma_data { int dma_request2; /* secondary DMA request line */ enum sdma_peripheral_type peripheral_type; int priority; + struct device_node *of_node; }; static inline int imx_dma_is_ipu(struct dma_chan *chan) -- cgit v1.2.3 From e907bf3c9820c8480b1d83aca42a5668c5364be9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 18 Feb 2019 14:29:06 -0500 Subject: media: include: fix several typos Use codespell to fix lots of typos over frontends. Manually verified to avoid false-positives. Signed-off-by: Mauro Carvalho Chehab Reviewed-by: Lad, Prabhakar Signed-off-by: Mauro Carvalho Chehab --- include/linux/platform_data/media/si4713.h | 4 ++-- include/media/davinci/dm355_ccdc.h | 4 ++-- include/media/davinci/dm644x_ccdc.h | 2 +- include/media/drv-intf/exynos-fimc.h | 2 +- include/media/drv-intf/saa7146.h | 2 +- include/media/drv-intf/saa7146_vv.h | 4 ++-- include/media/dvb_frontend.h | 8 ++++---- include/media/rc-map.h | 4 ++-- include/media/v4l2-ctrls.h | 2 +- include/media/v4l2-fwnode.h | 4 ++-- include/media/v4l2-subdev.h | 2 +- include/media/videobuf-core.h | 2 +- include/media/videobuf2-core.h | 2 +- 13 files changed, 21 insertions(+), 21 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/media/si4713.h b/include/linux/platform_data/media/si4713.h index 932668ad54f7..13b3eb7a9059 100644 --- a/include/linux/platform_data/media/si4713.h +++ b/include/linux/platform_data/media/si4713.h @@ -31,7 +31,7 @@ struct si4713_platform_data { */ struct si4713_rnl { __u32 index; /* modulator index */ - __u32 frequency; /* frequency to peform rnl measurement */ + __u32 frequency; /* frequency to perform rnl measurement */ __s32 rnl; /* result of measurement in dBuV */ __u32 reserved[4]; /* drivers and apps must init this to 0 */ }; @@ -40,7 +40,7 @@ struct si4713_rnl { * This is the ioctl number to query for rnl. Users must pass a * struct si4713_rnl pointer specifying desired frequency in 'frequency' field * following driver capabilities (i.e V4L2_TUNER_CAP_LOW). - * Driver must return measured value in the same struture, filling 'rnl' field. + * Driver must return measured value in the same structure, filling 'rnl' field. */ #define SI4713_IOC_MEASURE_RNL _IOWR('V', BASE_VIDIOC_PRIVATE + 0, \ struct si4713_rnl) diff --git a/include/media/davinci/dm355_ccdc.h b/include/media/davinci/dm355_ccdc.h index e6bc72f6b60f..1cba42d805fa 100644 --- a/include/media/davinci/dm355_ccdc.h +++ b/include/media/davinci/dm355_ccdc.h @@ -228,7 +228,7 @@ struct ccdc_config_params_raw { /* Threshold of median filter */ int med_filt_thres; /* - * horz and vertical data offset. Appliable for defect correction + * horz and vertical data offset. Applicable for defect correction * and lsc */ struct ccdc_data_offset data_offset; @@ -238,7 +238,7 @@ struct ccdc_config_params_raw { struct ccdc_black_clamp blk_clamp; /* Structure for Black Compensation */ struct ccdc_black_compensation blk_comp; - /* struture for vertical Defect Correction Module Configuration */ + /* structure for vertical Defect Correction Module Configuration */ struct ccdc_vertical_dft vertical_dft; /* structure for color space converter Module Configuration */ struct ccdc_csc csc; diff --git a/include/media/davinci/dm644x_ccdc.h b/include/media/davinci/dm644x_ccdc.h index 6ea2ce241851..694fc8f6081f 100644 --- a/include/media/davinci/dm644x_ccdc.h +++ b/include/media/davinci/dm644x_ccdc.h @@ -152,7 +152,7 @@ struct ccdc_params_raw { * order in memory(bottom to top) */ unsigned char image_invert_enable; - /* configurable paramaters */ + /* configurable parameters */ struct ccdc_config_params_raw config_params; }; diff --git a/include/media/drv-intf/exynos-fimc.h b/include/media/drv-intf/exynos-fimc.h index f9c64338841f..54c214737142 100644 --- a/include/media/drv-intf/exynos-fimc.h +++ b/include/media/drv-intf/exynos-fimc.h @@ -81,7 +81,7 @@ struct fimc_source_info { * v4l2_device notification id. This is only for internal use in the kernel. * Sensor subdevs should issue S5P_FIMC_TX_END_NOTIFY notification in single * frame capture mode when there is only one VSYNC pulse issued by the sensor - * at begining of the frame transmission. + * at beginning of the frame transmission. */ #define S5P_FIMC_TX_END_NOTIFY _IO('e', 0) diff --git a/include/media/drv-intf/saa7146.h b/include/media/drv-intf/saa7146.h index a7bf2c4a2e4d..71ce63c99cb4 100644 --- a/include/media/drv-intf/saa7146.h +++ b/include/media/drv-intf/saa7146.h @@ -139,7 +139,7 @@ struct saa7146_dev void *ext_priv; /* pointer for extension private use (most likely some private data) */ struct saa7146_ext_vv *ext_vv_data; - /* per device video/vbi informations (if available) */ + /* per device video/vbi information (if available) */ struct saa7146_vv *vv_data; void (*vv_callback)(struct saa7146_dev *dev, unsigned long status); diff --git a/include/media/drv-intf/saa7146_vv.h b/include/media/drv-intf/saa7146_vv.h index 6f80fb7f31a5..b34d86bb0664 100644 --- a/include/media/drv-intf/saa7146_vv.h +++ b/include/media/drv-intf/saa7146_vv.h @@ -151,7 +151,7 @@ struct saa7146_vv struct saa7146_ext_vv { - /* informations about the video capabilities of the device */ + /* information about the video capabilities of the device */ int inputs; int audios; u32 capabilities; @@ -241,7 +241,7 @@ void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits); #define SAA7146_CLIPPING_MASK 0x6 #define SAA7146_CLIPPING_MASK_INVERTED 0x7 -/* output formats: each entry holds four informations */ +/* output formats: each entry holds four information */ #define RGB08_COMPOSED 0x0217 /* composed is used in the sense of "not-planar" */ /* this means: planar?=0, yuv2rgb-conversation-mode=2, dither=yes(=1), format-mode = 7 */ #define RGB15_COMPOSED 0x0213 diff --git a/include/media/dvb_frontend.h b/include/media/dvb_frontend.h index 6f7a85ab3541..f05cd7b94a2c 100644 --- a/include/media/dvb_frontend.h +++ b/include/media/dvb_frontend.h @@ -160,7 +160,7 @@ enum dvbfe_algo { * The frontend search for a signal failed * * @DVBFE_ALGO_SEARCH_INVALID: - * The frontend search algorith was probably supplied with invalid + * The frontend search algorithm was probably supplied with invalid * parameters and the search is an invalid one * * @DVBFE_ALGO_SEARCH_ERROR: @@ -204,7 +204,7 @@ enum dvbfe_search { * @set_config: callback function used to send some tuner-specific * parameters. * @get_frequency: get the actual tuned frequency - * @get_bandwidth: get the bandwitdh used by the low pass filters + * @get_bandwidth: get the bandwidth used by the low pass filters * @get_if_frequency: get the Intermediate Frequency, in Hz. For baseband, * should return 0. * @get_status: returns the frontend lock status @@ -232,7 +232,7 @@ struct dvb_tuner_ops { int (*suspend)(struct dvb_frontend *fe); int (*resume)(struct dvb_frontend *fe); - /* This is the recomended way to set the tuner */ + /* This is the recommended way to set the tuner */ int (*set_params)(struct dvb_frontend *fe); int (*set_analog_params)(struct dvb_frontend *fe, struct analog_parameters *p); @@ -358,7 +358,7 @@ struct dvb_frontend_internal_info { * @release: callback function called when frontend is ready to be * freed. * drivers should free any allocated memory. - * @release_sec: callback function requesting that the Satelite Equipment + * @release_sec: callback function requesting that the Satellite Equipment * Control (SEC) driver to release and free any memory * allocated by the driver. * @init: callback function used to initialize the tuner device. diff --git a/include/media/rc-map.h b/include/media/rc-map.h index e5e86d595645..5e684bb0d64c 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -144,14 +144,14 @@ struct rc_map_list { /* Routines from rc-map.c */ /** - * rc_map_register() - Registers a Remote Controler scancode map + * rc_map_register() - Registers a Remote Controller scancode map * * @map: pointer to struct rc_map_list */ int rc_map_register(struct rc_map_list *map); /** - * rc_map_unregister() - Unregisters a Remote Controler scancode map + * rc_map_unregister() - Unregisters a Remote Controller scancode map * * @map: pointer to struct rc_map_list */ diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h index d63cf227b0ab..e5cae37ced2d 100644 --- a/include/media/v4l2-ctrls.h +++ b/include/media/v4l2-ctrls.h @@ -648,7 +648,7 @@ struct v4l2_ctrl *v4l2_ctrl_new_std_menu_items(struct v4l2_ctrl_handler *hdl, * @def: The control's default value. * @qmenu_int: The control's menu entries. * - * Same as v4l2_ctrl_new_std_menu(), but @mask is set to 0 and it additionaly + * Same as v4l2_ctrl_new_std_menu(), but @mask is set to 0 and it additionally * takes as an argument an array of integers determining the menu items. * * If @id refers to a non-integer-menu control, then this function will diff --git a/include/media/v4l2-fwnode.h b/include/media/v4l2-fwnode.h index 6d9d9f1839ac..6c07825e18b9 100644 --- a/include/media/v4l2-fwnode.h +++ b/include/media/v4l2-fwnode.h @@ -143,7 +143,7 @@ struct v4l2_fwnode_link { * @vep.bus_type to V4L2_MBUS_UNKNOWN. The caller may not provide a default * configuration in this case as the defaults are specific to a given bus type. * This functionality is deprecated and should not be used in new drivers and it - * is only supported for CSI-2 D-PHY, parallel and Bt.656 busses. + * is only supported for CSI-2 D-PHY, parallel and Bt.656 buses. * * The function does not change the V4L2 fwnode endpoint state if it fails. * @@ -186,7 +186,7 @@ void v4l2_fwnode_endpoint_free(struct v4l2_fwnode_endpoint *vep); * @vep.bus_type to V4L2_MBUS_UNKNOWN. The caller may not provide a default * configuration in this case as the defaults are specific to a given bus type. * This functionality is deprecated and should not be used in new drivers and it - * is only supported for CSI-2 D-PHY, parallel and Bt.656 busses. + * is only supported for CSI-2 D-PHY, parallel and Bt.656 buses. * * The function does not change the V4L2 fwnode endpoint state if it fails. * diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index 34da094a3f40..349e1c18cf48 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -70,7 +70,7 @@ struct v4l2_decode_vbi_line { * device. These devices are usually audio/video muxers/encoders/decoders or * sensors and webcam controllers. * - * Usually these devices are controlled through an i2c bus, but other busses + * Usually these devices are controlled through an i2c bus, but other buses * may also be used. * * The v4l2_subdev struct provides a way of accessing these devices in a diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h index 5684dc6f0d0d..2c4db97cd96f 100644 --- a/include/media/videobuf-core.h +++ b/include/media/videobuf-core.h @@ -43,7 +43,7 @@ struct videobuf_queue; * (which v4l2 uses). * * If there is a valid mapping for a buffer, buffer->baddr/bsize holds - * userspace address + size which can be feeded into the + * userspace address + size which can be fed into the * videobuf_dma_init_user function listed above. * */ diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h index a844abcae71e..910f3d469005 100644 --- a/include/media/videobuf2-core.h +++ b/include/media/videobuf2-core.h @@ -399,7 +399,7 @@ struct vb2_buffer { * @buf_queue: passes buffer vb to the driver; driver may start * hardware operation on this buffer; driver should give * the buffer back by calling vb2_buffer_done() function; - * it is allways called after calling VIDIOC_STREAMON() + * it is always called after calling VIDIOC_STREAMON() * ioctl; might be called before @start_streaming callback * if user pre-queued buffers before calling * VIDIOC_STREAMON(). -- cgit v1.2.3 From 9f03161a1bd8cd9ccf11533e52326718c656036e Mon Sep 17 00:00:00 2001 From: Michael Shych Date: Wed, 20 Feb 2019 09:34:22 +0000 Subject: platform_data/mlxreg: additions for Mellanox watchdog driver. There are two new fields added to mlxreg core structure: features - supported features of device and identity - device identity name. Add new defines for watchdog features. Signed-off-by: Michael Shych Reviewed-by: Guenter Roeck Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- include/linux/platform_data/mlxreg.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mlxreg.h b/include/linux/platform_data/mlxreg.h index 19f5cb618c55..31f7c25a44da 100644 --- a/include/linux/platform_data/mlxreg.h +++ b/include/linux/platform_data/mlxreg.h @@ -35,6 +35,19 @@ #define __LINUX_PLATFORM_DATA_MLXREG_H #define MLXREG_CORE_LABEL_MAX_SIZE 32 +#define MLXREG_CORE_WD_FEATURE_NOWAYOUT BIT(0) +#define MLXREG_CORE_WD_FEATURE_START_AT_BOOT BIT(1) + +/** + * enum mlxreg_wdt_type - type of HW watchdog + * + * TYPE1 HW watchdog implementation exist in old systems. + * All new systems have TYPE2 HW watchdog. + */ +enum mlxreg_wdt_type { + MLX_WDT_TYPE1, + MLX_WDT_TYPE2, +}; /** * struct mlxreg_hotplug_device - I2C device data: @@ -110,11 +123,17 @@ struct mlxreg_core_item { * @led_data: led private data; * @regmap: register map of parent device; * @counter: number of led instances; + * @features: supported features of device; + * @version: implementation version; + * @identity: device identity name; */ struct mlxreg_core_platform_data { struct mlxreg_core_data *data; void *regmap; int counter; + u32 features; + u32 version; + char identity[MLXREG_CORE_LABEL_MAX_SIZE]; }; /** -- cgit v1.2.3 From b45a02e13ee74b6fde56df4d76786058821a3aba Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 19 Mar 2019 15:54:16 +0100 Subject: gpio: amd-fch: Fix bogus SPDX identifier spdxcheck.py complains: include/linux/platform_data/gpio/gpio-amd-fch.h: 1:28 Invalid License ID: GPL+ which is correct because GPL+ is not a valid identifier. Of course this could have been caught by checkpatch.pl _before_ submitting or merging the patch. WARNING: 'SPDX-License-Identifier: GPL+ */' is not supported in LICENSES/... #271: FILE: include/linux/platform_data/gpio/gpio-amd-fch.h:1: +/* SPDX-License-Identifier: GPL+ */ Fix it under the assumption that the author meant GPL-2.0+, which makes sense as the corresponding C file is using that identifier. Fixes: e09d168f13f0 ("gpio: AMD G-Series PCH gpio driver") Signed-off-by: Thomas Gleixner Signed-off-by: Bartosz Golaszewski --- include/linux/platform_data/gpio/gpio-amd-fch.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/gpio/gpio-amd-fch.h b/include/linux/platform_data/gpio/gpio-amd-fch.h index a867637e172d..9e46678edb2a 100644 --- a/include/linux/platform_data/gpio/gpio-amd-fch.h +++ b/include/linux/platform_data/gpio/gpio-amd-fch.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL+ */ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * AMD FCH gpio driver platform-data -- cgit v1.2.3