From 00cda13e339c9f4956a6f036675df2ca5b5a552e Mon Sep 17 00:00:00 2001
From: Dmitry Osipenko <digetx@gmail.com>
Date: Fri, 14 Aug 2020 00:34:02 +0300
Subject: power: supply: Support battery temperature device-tree properties

The generic battery temperature properties are already supported by the
power-supply core. Let's support parsing of the common battery temperature
properties from a device-tree.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 include/linux/power_supply.h | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index 97cc4b85bf61..d0684362a392 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -365,6 +365,12 @@ struct power_supply_battery_info {
 	int constant_charge_voltage_max_uv; /* microVolts */
 	int factory_internal_resistance_uohm;   /* microOhms */
 	int ocv_temp[POWER_SUPPLY_OCV_TEMP_MAX];/* celsius */
+	int temp_ambient_alert_min;             /* celsius */
+	int temp_ambient_alert_max;             /* celsius */
+	int temp_alert_min;                     /* celsius */
+	int temp_alert_max;                     /* celsius */
+	int temp_min;                           /* celsius */
+	int temp_max;                           /* celsius */
 	struct power_supply_battery_ocv_table *ocv_table[POWER_SUPPLY_OCV_TEMP_MAX];
 	int ocv_table_size[POWER_SUPPLY_OCV_TEMP_MAX];
 	struct power_supply_resistance_temp_table *resist_table;
-- 
cgit v1.2.3


From 5ca937fb5d6870735341d8fdacdd2b49618c35dc Mon Sep 17 00:00:00 2001
From: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Date: Thu, 13 Aug 2020 11:34:08 -0700
Subject: power: supply: add wireless type

Currently, power_supply framework supports only Battery, UPS,
Mains and USB power_supply_type. Add wireless power_supply_type
so that the drivers which supports wireless can register a power
supply class device with POWER_SUPPLY_TYPE_WIRELESS.

Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 Documentation/ABI/testing/sysfs-class-power | 2 +-
 drivers/power/supply/power_supply_sysfs.c   | 1 +
 include/linux/power_supply.h                | 1 +
 3 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'include/linux')

diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power
index 40213c73bc9c..651599fb18f8 100644
--- a/Documentation/ABI/testing/sysfs-class-power
+++ b/Documentation/ABI/testing/sysfs-class-power
@@ -34,7 +34,7 @@ Description:
 		Describes the main type of the supply.
 
 		Access: Read
-		Valid values: "Battery", "UPS", "Mains", "USB"
+		Valid values: "Battery", "UPS", "Mains", "USB", "Wireless"
 
 ===== Battery Properties =====
 
diff --git a/drivers/power/supply/power_supply_sysfs.c b/drivers/power/supply/power_supply_sysfs.c
index 3d383086018c..a616b9d8f43c 100644
--- a/drivers/power/supply/power_supply_sysfs.c
+++ b/drivers/power/supply/power_supply_sysfs.c
@@ -56,6 +56,7 @@ static const char * const POWER_SUPPLY_TYPE_TEXT[] = {
 	[POWER_SUPPLY_TYPE_USB_PD]		= "USB_PD",
 	[POWER_SUPPLY_TYPE_USB_PD_DRP]		= "USB_PD_DRP",
 	[POWER_SUPPLY_TYPE_APPLE_BRICK_ID]	= "BrickID",
+	[POWER_SUPPLY_TYPE_WIRELESS]		= "Wireless",
 };
 
 static const char * const POWER_SUPPLY_USB_TYPE_TEXT[] = {
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index d0684362a392..81a55e974feb 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -186,6 +186,7 @@ enum power_supply_type {
 	POWER_SUPPLY_TYPE_USB_PD,		/* Power Delivery Port */
 	POWER_SUPPLY_TYPE_USB_PD_DRP,		/* PD Dual Role Port */
 	POWER_SUPPLY_TYPE_APPLE_BRICK_ID,	/* Apple Charging Method */
+	POWER_SUPPLY_TYPE_WIRELESS,		/* Wireless */
 };
 
 enum power_supply_usb_type {
-- 
cgit v1.2.3


From 17529bcf0ae20f1ac6d7846762bf0c6ad91dbb7f Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Thu, 27 Aug 2020 10:48:28 +0200
Subject: power: supply: gpio-charger: Convert to GPIO descriptors

This converts the GPIO charger to use exclusively GPIO
descriptors, moving the two remaining platforms passing
global GPIO numbers over to using a GPIO descriptor table.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 arch/arm/mach-pxa/tosa.c            | 12 ++++++++++--
 arch/arm/mach-sa1100/collie.c       | 14 ++++++++++++--
 drivers/power/supply/gpio-charger.c | 26 +-------------------------
 include/linux/power/gpio-charger.h  |  6 ------
 4 files changed, 23 insertions(+), 35 deletions(-)

(limited to 'include/linux')

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 3d2c108e911e..431709725d02 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -369,6 +369,15 @@ static struct pxaficp_platform_data tosa_ficp_platform_data = {
 /*
  * Tosa AC IN
  */
+static struct gpiod_lookup_table tosa_power_gpiod_table = {
+	.dev_id = "gpio-charger",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_AC_IN,
+			    NULL, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static char *tosa_ac_supplied_to[] = {
 	"main-battery",
 	"backup-battery",
@@ -378,8 +387,6 @@ static char *tosa_ac_supplied_to[] = {
 static struct gpio_charger_platform_data tosa_power_data = {
 	.name			= "charger",
 	.type			= POWER_SUPPLY_TYPE_MAINS,
-	.gpio			= TOSA_GPIO_AC_IN,
-	.gpio_active_low	= 1,
 	.supplied_to		= tosa_ac_supplied_to,
 	.num_supplicants	= ARRAY_SIZE(tosa_ac_supplied_to),
 };
@@ -951,6 +958,7 @@ static void __init tosa_init(void)
 	clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
 
 	gpiod_add_lookup_table(&tosa_udc_gpiod_table);
+	gpiod_add_lookup_table(&tosa_power_gpiod_table);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 3cc2b71e16f0..bd3a52fd09ce 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -30,6 +30,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/power/gpio-charger.h>
 
 #include <video/sa1100fb.h>
@@ -131,16 +132,23 @@ static struct irda_platform_data collie_ir_data = {
 /*
  * Collie AC IN
  */
+static struct gpiod_lookup_table collie_power_gpiod_table = {
+	.dev_id = "gpio-charger",
+	.table = {
+		GPIO_LOOKUP("gpio", COLLIE_GPIO_AC_IN,
+			    NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static char *collie_ac_supplied_to[] = {
 	"main-battery",
 	"backup-battery",
 };
 
-
 static struct gpio_charger_platform_data collie_power_data = {
 	.name			= "charger",
 	.type			= POWER_SUPPLY_TYPE_MAINS,
-	.gpio			= COLLIE_GPIO_AC_IN,
 	.supplied_to		= collie_ac_supplied_to,
 	.num_supplicants	= ARRAY_SIZE(collie_ac_supplied_to),
 };
@@ -386,6 +394,8 @@ static void __init collie_init(void)
 
 	platform_scoop_config = &collie_pcmcia_config;
 
+	gpiod_add_lookup_table(&collie_power_gpiod_table);
+
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	if (ret) {
 		printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
diff --git a/drivers/power/supply/gpio-charger.c b/drivers/power/supply/gpio-charger.c
index 875735d50716..ae778f110101 100644
--- a/drivers/power/supply/gpio-charger.c
+++ b/drivers/power/supply/gpio-charger.c
@@ -5,7 +5,6 @@
  */
 
 #include <linux/device.h>
-#include <linux/gpio.h> /* For legacy platform data */
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -131,7 +130,6 @@ static int gpio_charger_probe(struct platform_device *pdev)
 	struct power_supply_desc *charger_desc;
 	struct gpio_desc *charge_status;
 	int charge_status_irq;
-	unsigned long flags;
 	int ret;
 	int num_props = 0;
 
@@ -149,29 +147,7 @@ static int gpio_charger_probe(struct platform_device *pdev)
 	 * boardfile descriptor tables. It's good to try this first.
 	 */
 	gpio_charger->gpiod = devm_gpiod_get_optional(dev, NULL, GPIOD_IN);
-
-	/*
-	 * Fallback to legacy platform data method, if no GPIO is specified
-	 * using boardfile descriptor tables.
-	 */
-	if (!gpio_charger->gpiod && pdata) {
-		/* Non-DT: use legacy GPIO numbers */
-		if (!gpio_is_valid(pdata->gpio)) {
-			dev_err(dev, "Invalid gpio pin in pdata\n");
-			return -EINVAL;
-		}
-		flags = GPIOF_IN;
-		if (pdata->gpio_active_low)
-			flags |= GPIOF_ACTIVE_LOW;
-		ret = devm_gpio_request_one(dev, pdata->gpio, flags,
-					    dev_name(dev));
-		if (ret) {
-			dev_err(dev, "Failed to request gpio pin: %d\n", ret);
-			return ret;
-		}
-		/* Then convert this to gpiod for now */
-		gpio_charger->gpiod = gpio_to_desc(pdata->gpio);
-	} else if (IS_ERR(gpio_charger->gpiod)) {
+	if (IS_ERR(gpio_charger->gpiod)) {
 		/* Just try again if this happens */
 		if (PTR_ERR(gpio_charger->gpiod) == -EPROBE_DEFER)
 			return -EPROBE_DEFER;
diff --git a/include/linux/power/gpio-charger.h b/include/linux/power/gpio-charger.h
index 5a5a8de98181..c0b7657ac1df 100644
--- a/include/linux/power/gpio-charger.h
+++ b/include/linux/power/gpio-charger.h
@@ -13,18 +13,12 @@
  * struct gpio_charger_platform_data - platform_data for gpio_charger devices
  * @name:		Name for the chargers power_supply device
  * @type:		Type of the charger
- * @gpio:		GPIO which is used to indicate the chargers status
- * @gpio_active_low:	Should be set to 1 if the GPIO is active low otherwise 0
  * @supplied_to:	Array of battery names to which this chargers supplies power
  * @num_supplicants:	Number of entries in the supplied_to array
  */
 struct gpio_charger_platform_data {
 	const char *name;
 	enum power_supply_type type;
-
-	int gpio;
-	int gpio_active_low;
-
 	char **supplied_to;
 	size_t num_supplicants;
 };
-- 
cgit v1.2.3


From b6f3e21b928a8ae7959a0d79203b80bd70120768 Mon Sep 17 00:00:00 2001
From: Sebastian Reichel <sebastian.reichel@collabora.com>
Date: Wed, 26 Aug 2020 16:41:58 +0200
Subject: power: supply: smb347-charger: Drop pdata support

There are no platforms using the pdata support, so let's
drop it to simplify the driver.

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/smb347-charger.c | 287 +++++++++++++++++++---------------
 include/linux/power/smb347-charger.h  | 114 --------------
 2 files changed, 159 insertions(+), 242 deletions(-)
 delete mode 100644 include/linux/power/smb347-charger.h

(limited to 'include/linux')

diff --git a/drivers/power/supply/smb347-charger.c b/drivers/power/supply/smb347-charger.c
index ec68ab2bce27..b182727dfc90 100644
--- a/drivers/power/supply/smb347-charger.c
+++ b/drivers/power/supply/smb347-charger.c
@@ -17,9 +17,16 @@
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/power_supply.h>
-#include <linux/power/smb347-charger.h>
 #include <linux/regmap.h>
 
+#include <dt-bindings/power/summit,smb347-charger.h>
+
+/* Use the default compensation method */
+#define SMB3XX_SOFT_TEMP_COMPENSATE_DEFAULT -1
+
+/* Use default factory programmed value for hard/soft temperature limit */
+#define SMB3XX_TEMP_USE_DEFAULT		-273
+
 /*
  * Configuration registers. These are mirrored to volatile RAM and can be
  * written once %CMD_A_ALLOW_WRITE is set in %CMD_A register. They will be
@@ -129,7 +136,52 @@
  * @mains_online: is AC/DC input connected
  * @usb_online: is USB input connected
  * @charging_enabled: is charging enabled
- * @pdata: pointer to platform data
+ * @max_charge_current: maximum current (in uA) the battery can be charged
+ * @max_charge_voltage: maximum voltage (in uV) the battery can be charged
+ * @pre_charge_current: current (in uA) to use in pre-charging phase
+ * @termination_current: current (in uA) used to determine when the
+ *			 charging cycle terminates
+ * @pre_to_fast_voltage: voltage (in uV) treshold used for transitioning to
+ *			 pre-charge to fast charge mode
+ * @mains_current_limit: maximum input current drawn from AC/DC input (in uA)
+ * @usb_hc_current_limit: maximum input high current (in uA) drawn from USB
+ *			  input
+ * @chip_temp_threshold: die temperature where device starts limiting charge
+ *			 current [%100 - %130] (in degree C)
+ * @soft_cold_temp_limit: soft cold temperature limit [%0 - %15] (in degree C),
+ *			  granularity is 5 deg C.
+ * @soft_hot_temp_limit: soft hot temperature limit [%40 - %55] (in degree  C),
+ *			 granularity is 5 deg C.
+ * @hard_cold_temp_limit: hard cold temperature limit [%-5 - %10] (in degree C),
+ *			  granularity is 5 deg C.
+ * @hard_hot_temp_limit: hard hot temperature limit [%50 - %65] (in degree C),
+ *			 granularity is 5 deg C.
+ * @suspend_on_hard_temp_limit: suspend charging when hard limit is hit
+ * @soft_temp_limit_compensation: compensation method when soft temperature
+ *				  limit is hit
+ * @charge_current_compensation: current (in uA) for charging compensation
+ *				 current when temperature hits soft limits
+ * @use_mains: AC/DC input can be used
+ * @use_usb: USB input can be used
+ * @use_usb_otg: USB OTG output can be used (not implemented yet)
+ * @enable_control: how charging enable/disable is controlled
+ *		    (driver/pin controls)
+ *
+ * @use_main, @use_usb, and @use_usb_otg are means to enable/disable
+ * hardware support for these. This is useful when we want to have for
+ * example OTG charging controlled via OTG transceiver driver and not by
+ * the SMB347 hardware.
+ *
+ * Hard and soft temperature limit values are given as described in the
+ * device data sheet and assuming NTC beta value is %3750. Even if this is
+ * not the case, these values should be used. They can be mapped to the
+ * corresponding NTC beta values with the help of table %2 in the data
+ * sheet. So for example if NTC beta is %3375 and we want to program hard
+ * hot limit to be %53 deg C, @hard_hot_temp_limit should be set to %50.
+ *
+ * If zero value is given in any of the current and voltage values, the
+ * factory programmed default will be used. For soft/hard temperature
+ * values, pass in %SMB3XX_TEMP_USE_DEFAULT instead.
  */
 struct smb347_charger {
 	struct device		*dev;
@@ -140,7 +192,26 @@ struct smb347_charger {
 	bool			mains_online;
 	bool			usb_online;
 	bool			charging_enabled;
-	const struct smb347_charger_platform_data *pdata;
+
+	unsigned int		max_charge_current;
+	unsigned int		max_charge_voltage;
+	unsigned int		pre_charge_current;
+	unsigned int		termination_current;
+	unsigned int		pre_to_fast_voltage;
+	unsigned int		mains_current_limit;
+	unsigned int		usb_hc_current_limit;
+	unsigned int		chip_temp_threshold;
+	int			soft_cold_temp_limit;
+	int			soft_hot_temp_limit;
+	int			hard_cold_temp_limit;
+	int			hard_hot_temp_limit;
+	bool			suspend_on_hard_temp_limit;
+	unsigned int		soft_temp_limit_compensation;
+	unsigned int		charge_current_compensation;
+	bool			use_mains;
+	bool			use_usb;
+	bool			use_usb_otg;
+	unsigned int		enable_control;
 };
 
 enum smb_charger_chipid {
@@ -235,9 +306,9 @@ static int smb347_update_ps_status(struct smb347_charger *smb)
 	 * Dc and usb are set depending on whether they are enabled in
 	 * platform data _and_ whether corresponding undervoltage is set.
 	 */
-	if (smb->pdata->use_mains)
+	if (smb->use_mains)
 		dc = !(val & IRQSTAT_E_DCIN_UV_STAT);
-	if (smb->pdata->use_usb)
+	if (smb->use_usb)
 		usb = !(val & IRQSTAT_E_USBIN_UV_STAT);
 
 	ret = smb->mains_online != dc || smb->usb_online != usb;
@@ -287,7 +358,7 @@ static int smb347_charging_set(struct smb347_charger *smb, bool enable)
 {
 	int ret = 0;
 
-	if (smb->pdata->enable_control != SMB347_CHG_ENABLE_SW) {
+	if (smb->enable_control != SMB3XX_CHG_ENABLE_SW) {
 		dev_dbg(smb->dev, "charging enable/disable in SW disabled\n");
 		return 0;
 	}
@@ -339,9 +410,9 @@ static int smb347_set_charge_current(struct smb347_charger *smb)
 	unsigned int id = smb->id;
 	int ret;
 
-	if (smb->pdata->max_charge_current) {
+	if (smb->max_charge_current) {
 		ret = current_to_hw(fcc_tbl[id], ARRAY_SIZE(fcc_tbl[id]),
-				    smb->pdata->max_charge_current);
+				    smb->max_charge_current);
 		if (ret < 0)
 			return ret;
 
@@ -352,9 +423,9 @@ static int smb347_set_charge_current(struct smb347_charger *smb)
 			return ret;
 	}
 
-	if (smb->pdata->pre_charge_current) {
+	if (smb->pre_charge_current) {
 		ret = current_to_hw(pcc_tbl[id], ARRAY_SIZE(pcc_tbl[id]),
-				    smb->pdata->pre_charge_current);
+				    smb->pre_charge_current);
 		if (ret < 0)
 			return ret;
 
@@ -365,9 +436,9 @@ static int smb347_set_charge_current(struct smb347_charger *smb)
 			return ret;
 	}
 
-	if (smb->pdata->termination_current) {
+	if (smb->termination_current) {
 		ret = current_to_hw(tc_tbl[id], ARRAY_SIZE(tc_tbl[id]),
-				    smb->pdata->termination_current);
+				    smb->termination_current);
 		if (ret < 0)
 			return ret;
 
@@ -385,9 +456,9 @@ static int smb347_set_current_limits(struct smb347_charger *smb)
 	unsigned int id = smb->id;
 	int ret;
 
-	if (smb->pdata->mains_current_limit) {
+	if (smb->mains_current_limit) {
 		ret = current_to_hw(icl_tbl[id], ARRAY_SIZE(icl_tbl[id]),
-				    smb->pdata->mains_current_limit);
+				    smb->mains_current_limit);
 		if (ret < 0)
 			return ret;
 
@@ -398,9 +469,9 @@ static int smb347_set_current_limits(struct smb347_charger *smb)
 			return ret;
 	}
 
-	if (smb->pdata->usb_hc_current_limit) {
+	if (smb->usb_hc_current_limit) {
 		ret = current_to_hw(icl_tbl[id], ARRAY_SIZE(icl_tbl[id]),
-				    smb->pdata->usb_hc_current_limit);
+				    smb->usb_hc_current_limit);
 		if (ret < 0)
 			return ret;
 
@@ -417,8 +488,8 @@ static int smb347_set_voltage_limits(struct smb347_charger *smb)
 {
 	int ret;
 
-	if (smb->pdata->pre_to_fast_voltage) {
-		ret = smb->pdata->pre_to_fast_voltage;
+	if (smb->pre_to_fast_voltage) {
+		ret = smb->pre_to_fast_voltage;
 
 		/* uV */
 		ret = clamp_val(ret, 2400000, 3000000) - 2400000;
@@ -431,8 +502,8 @@ static int smb347_set_voltage_limits(struct smb347_charger *smb)
 			return ret;
 	}
 
-	if (smb->pdata->max_charge_voltage) {
-		ret = smb->pdata->max_charge_voltage;
+	if (smb->max_charge_voltage) {
+		ret = smb->max_charge_voltage;
 
 		/* uV */
 		ret = clamp_val(ret, 3500000, 4500000) - 3500000;
@@ -454,8 +525,8 @@ static int smb347_set_temp_limits(struct smb347_charger *smb)
 	int ret = 0;
 	int val;
 
-	if (smb->pdata->chip_temp_threshold) {
-		val = smb->pdata->chip_temp_threshold;
+	if (smb->chip_temp_threshold) {
+		val = smb->chip_temp_threshold;
 
 		/* degree C */
 		val = clamp_val(val, 100, 130) - 100;
@@ -468,8 +539,8 @@ static int smb347_set_temp_limits(struct smb347_charger *smb)
 			return ret;
 	}
 
-	if (smb->pdata->soft_cold_temp_limit != SMB347_TEMP_USE_DEFAULT) {
-		val = smb->pdata->soft_cold_temp_limit;
+	if (smb->soft_cold_temp_limit != SMB3XX_TEMP_USE_DEFAULT) {
+		val = smb->soft_cold_temp_limit;
 
 		val = clamp_val(val, 0, 15);
 		val /= 5;
@@ -485,8 +556,8 @@ static int smb347_set_temp_limits(struct smb347_charger *smb)
 		enable_therm_monitor = true;
 	}
 
-	if (smb->pdata->soft_hot_temp_limit != SMB347_TEMP_USE_DEFAULT) {
-		val = smb->pdata->soft_hot_temp_limit;
+	if (smb->soft_hot_temp_limit != SMB3XX_TEMP_USE_DEFAULT) {
+		val = smb->soft_hot_temp_limit;
 
 		val = clamp_val(val, 40, 55) - 40;
 		val /= 5;
@@ -500,8 +571,8 @@ static int smb347_set_temp_limits(struct smb347_charger *smb)
 		enable_therm_monitor = true;
 	}
 
-	if (smb->pdata->hard_cold_temp_limit != SMB347_TEMP_USE_DEFAULT) {
-		val = smb->pdata->hard_cold_temp_limit;
+	if (smb->hard_cold_temp_limit != SMB3XX_TEMP_USE_DEFAULT) {
+		val = smb->hard_cold_temp_limit;
 
 		val = clamp_val(val, -5, 10) + 5;
 		val /= 5;
@@ -517,8 +588,8 @@ static int smb347_set_temp_limits(struct smb347_charger *smb)
 		enable_therm_monitor = true;
 	}
 
-	if (smb->pdata->hard_hot_temp_limit != SMB347_TEMP_USE_DEFAULT) {
-		val = smb->pdata->hard_hot_temp_limit;
+	if (smb->hard_hot_temp_limit != SMB3XX_TEMP_USE_DEFAULT) {
+		val = smb->hard_hot_temp_limit;
 
 		val = clamp_val(val, 50, 65) - 50;
 		val /= 5;
@@ -549,16 +620,16 @@ static int smb347_set_temp_limits(struct smb347_charger *smb)
 			return ret;
 	}
 
-	if (smb->pdata->suspend_on_hard_temp_limit) {
+	if (smb->suspend_on_hard_temp_limit) {
 		ret = regmap_update_bits(smb->regmap, CFG_SYSOK,
 				 CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED, 0);
 		if (ret < 0)
 			return ret;
 	}
 
-	if (smb->pdata->soft_temp_limit_compensation !=
-	    SMB347_SOFT_TEMP_COMPENSATE_DEFAULT) {
-		val = smb->pdata->soft_temp_limit_compensation & 0x3;
+	if (smb->soft_temp_limit_compensation !=
+	    SMB3XX_SOFT_TEMP_COMPENSATE_DEFAULT) {
+		val = smb->soft_temp_limit_compensation & 0x3;
 
 		ret = regmap_update_bits(smb->regmap, CFG_THERM,
 				 CFG_THERM_SOFT_HOT_COMPENSATION_MASK,
@@ -573,9 +644,9 @@ static int smb347_set_temp_limits(struct smb347_charger *smb)
 			return ret;
 	}
 
-	if (smb->pdata->charge_current_compensation) {
+	if (smb->charge_current_compensation) {
 		val = current_to_hw(ccc_tbl[id], ARRAY_SIZE(ccc_tbl[id]),
-				    smb->pdata->charge_current_compensation);
+				    smb->charge_current_compensation);
 		if (val < 0)
 			return val;
 
@@ -634,7 +705,7 @@ static int smb347_hw_init(struct smb347_charger *smb)
 		goto fail;
 
 	/* If USB charging is disabled we put the USB in suspend mode */
-	if (!smb->pdata->use_usb) {
+	if (!smb->use_usb) {
 		ret = regmap_update_bits(smb->regmap, CMD_A,
 					 CMD_A_SUSPEND_ENABLED,
 					 CMD_A_SUSPEND_ENABLED);
@@ -647,7 +718,7 @@ static int smb347_hw_init(struct smb347_charger *smb)
 	 * support for driving VBUS. Otherwise we disable it.
 	 */
 	ret = regmap_update_bits(smb->regmap, CFG_OTHER, CFG_OTHER_RID_MASK,
-		smb->pdata->use_usb_otg ? CFG_OTHER_RID_ENABLED_AUTO_OTG : 0);
+		smb->use_usb_otg ? CFG_OTHER_RID_ENABLED_AUTO_OTG : 0);
 	if (ret < 0)
 		goto fail;
 
@@ -656,11 +727,11 @@ static int smb347_hw_init(struct smb347_charger *smb)
 	 * command register unless pin control is specified in the platform
 	 * data.
 	 */
-	switch (smb->pdata->enable_control) {
-	case SMB347_CHG_ENABLE_PIN_ACTIVE_LOW:
+	switch (smb->enable_control) {
+	case SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW:
 		val = CFG_PIN_EN_CTRL_ACTIVE_LOW;
 		break;
-	case SMB347_CHG_ENABLE_PIN_ACTIVE_HIGH:
+	case SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH:
 		val = CFG_PIN_EN_CTRL_ACTIVE_HIGH;
 		break;
 	default:
@@ -729,9 +800,9 @@ static irqreturn_t smb347_interrupt(int irq, void *data)
 	 */
 	if (stat_c & STAT_C_CHARGER_ERROR) {
 		dev_err(smb->dev, "charging stopped due to charger error\n");
-		if (smb->pdata->use_mains)
+		if (smb->use_mains)
 			power_supply_changed(smb->mains);
-		if (smb->pdata->use_usb)
+		if (smb->use_usb)
 			power_supply_changed(smb->usb);
 		handled = true;
 	}
@@ -743,9 +814,9 @@ static irqreturn_t smb347_interrupt(int irq, void *data)
 	 */
 	if (irqstat_c & (IRQSTAT_C_TERMINATION_IRQ | IRQSTAT_C_TAPER_IRQ)) {
 		if (irqstat_c & IRQSTAT_C_TERMINATION_STAT) {
-			if (smb->pdata->use_mains)
+			if (smb->use_mains)
 				power_supply_changed(smb->mains);
-			if (smb->pdata->use_usb)
+			if (smb->use_usb)
 				power_supply_changed(smb->usb);
 		}
 		dev_dbg(smb->dev, "going to HW maintenance mode\n");
@@ -761,9 +832,9 @@ static irqreturn_t smb347_interrupt(int irq, void *data)
 
 		if (irqstat_d & IRQSTAT_D_CHARGE_TIMEOUT_STAT)
 			dev_warn(smb->dev, "charging stopped due to timeout\n");
-		if (smb->pdata->use_mains)
+		if (smb->use_mains)
 			power_supply_changed(smb->mains);
-		if (smb->pdata->use_usb)
+		if (smb->use_usb)
 			power_supply_changed(smb->usb);
 		handled = true;
 	}
@@ -775,9 +846,9 @@ static irqreturn_t smb347_interrupt(int irq, void *data)
 	if (irqstat_e & (IRQSTAT_E_USBIN_UV_IRQ | IRQSTAT_E_DCIN_UV_IRQ)) {
 		if (smb347_update_ps_status(smb) > 0) {
 			smb347_start_stop_charging(smb);
-			if (smb->pdata->use_mains)
+			if (smb->use_mains)
 				power_supply_changed(smb->mains);
-			if (smb->pdata->use_usb)
+			if (smb->use_usb)
 				power_supply_changed(smb->usb);
 		}
 		handled = true;
@@ -832,25 +903,10 @@ static inline int smb347_irq_disable(struct smb347_charger *smb)
 static int smb347_irq_init(struct smb347_charger *smb,
 			   struct i2c_client *client)
 {
-	const struct smb347_charger_platform_data *pdata = smb->pdata;
-	unsigned long irqflags = IRQF_ONESHOT;
 	int ret;
 
-	/* Requesting GPIO for IRQ is only needed in non-DT way */
-	if (!client->irq) {
-		int irq = gpio_to_irq(pdata->irq_gpio);
-
-		ret = devm_gpio_request_one(smb->dev, pdata->irq_gpio,
-					    GPIOF_IN, client->name);
-		if (ret < 0)
-			return ret;
-
-		irqflags |= IRQF_TRIGGER_FALLING;
-		client->irq = irq;
-	}
-
 	ret = devm_request_threaded_irq(smb->dev, client->irq, NULL,
-					smb347_interrupt, irqflags,
+					smb347_interrupt, IRQF_ONESHOT,
 					client->name, smb);
 	if (ret < 0)
 		return ret;
@@ -1118,56 +1174,52 @@ static bool smb347_readable_reg(struct device *dev, unsigned int reg)
 	return smb347_volatile_reg(dev, reg);
 }
 
-static void smb347_dt_parse_pdata(struct device_node *np,
-				  struct smb347_charger_platform_data *pdata)
+static void smb347_dt_parse_dev_info(struct smb347_charger *smb)
 {
-	pdata->soft_temp_limit_compensation =
-					SMB347_SOFT_TEMP_COMPENSATE_DEFAULT;
+	struct device_node *np = smb->dev->of_node;
+
+	smb->soft_temp_limit_compensation =
+					SMB3XX_SOFT_TEMP_COMPENSATE_DEFAULT;
 	/*
 	 * These properties come from the battery info, still we need to
 	 * pre-initialize the values. See smb347_get_battery_info() below.
 	 */
-	pdata->soft_cold_temp_limit = SMB347_TEMP_USE_DEFAULT;
-	pdata->hard_cold_temp_limit = SMB347_TEMP_USE_DEFAULT;
-	pdata->soft_hot_temp_limit  = SMB347_TEMP_USE_DEFAULT;
-	pdata->hard_hot_temp_limit  = SMB347_TEMP_USE_DEFAULT;
+	smb->soft_cold_temp_limit = SMB3XX_TEMP_USE_DEFAULT;
+	smb->hard_cold_temp_limit = SMB3XX_TEMP_USE_DEFAULT;
+	smb->soft_hot_temp_limit  = SMB3XX_TEMP_USE_DEFAULT;
+	smb->hard_hot_temp_limit  = SMB3XX_TEMP_USE_DEFAULT;
 
 	/* Charging constraints */
 	of_property_read_u32(np, "summit,fast-voltage-threshold-microvolt",
-			     &pdata->pre_to_fast_voltage);
+			     &smb->pre_to_fast_voltage);
 	of_property_read_u32(np, "summit,mains-current-limit-microamp",
-			     &pdata->mains_current_limit);
+			     &smb->mains_current_limit);
 	of_property_read_u32(np, "summit,usb-current-limit-microamp",
-			     &pdata->usb_hc_current_limit);
+			     &smb->usb_hc_current_limit);
 
 	/* For thermometer monitoring */
 	of_property_read_u32(np, "summit,chip-temperature-threshold-celsius",
-			     &pdata->chip_temp_threshold);
+			     &smb->chip_temp_threshold);
 	of_property_read_u32(np, "summit,soft-compensation-method",
-			     &pdata->soft_temp_limit_compensation);
+			     &smb->soft_temp_limit_compensation);
 	of_property_read_u32(np, "summit,charge-current-compensation-microamp",
-			     &pdata->charge_current_compensation);
+			     &smb->charge_current_compensation);
 
 	/* Supported charging mode */
-	pdata->use_mains =
+	smb->use_mains =
 		of_property_read_bool(np, "summit,enable-mains-charging");
-	pdata->use_usb =
+	smb->use_usb =
 		of_property_read_bool(np, "summit,enable-usb-charging");
-	pdata->use_usb_otg =
+	smb->use_usb_otg =
 		of_property_read_bool(np, "summit,enable-otg-charging");
 
 	/* Select charging control */
 	of_property_read_u32(np, "summit,enable-charge-control",
-			     &pdata->enable_control);
-
-	/* Interrupt support is optional */
-	if (!of_find_property(np, "interrupts", NULL))
-		pdata->irq_gpio = -1;
+			     &smb->enable_control);
 }
 
 static int smb347_get_battery_info(struct smb347_charger *smb)
 {
-	struct smb347_charger_platform_data *pdata = (void *)smb->pdata;
 	struct power_supply_battery_info info = {};
 	struct power_supply *supply;
 	int err;
@@ -1184,53 +1236,37 @@ static int smb347_get_battery_info(struct smb347_charger *smb)
 		return err;
 
 	if (info.constant_charge_current_max_ua != -EINVAL)
-		pdata->max_charge_current = info.constant_charge_current_max_ua;
+		smb->max_charge_current = info.constant_charge_current_max_ua;
 
 	if (info.constant_charge_voltage_max_uv != -EINVAL)
-		pdata->max_charge_voltage = info.constant_charge_voltage_max_uv;
+		smb->max_charge_voltage = info.constant_charge_voltage_max_uv;
 
 	if (info.precharge_current_ua != -EINVAL)
-		pdata->pre_charge_current = info.precharge_current_ua;
+		smb->pre_charge_current = info.precharge_current_ua;
 
 	if (info.charge_term_current_ua != -EINVAL)
-		pdata->termination_current = info.charge_term_current_ua;
+		smb->termination_current = info.charge_term_current_ua;
 
 	if (info.temp_alert_min != INT_MIN)
-		pdata->soft_cold_temp_limit = info.temp_alert_min;
+		smb->soft_cold_temp_limit = info.temp_alert_min;
 
 	if (info.temp_alert_max != INT_MAX)
-		pdata->soft_hot_temp_limit = info.temp_alert_max;
+		smb->soft_hot_temp_limit = info.temp_alert_max;
 
 	if (info.temp_min != INT_MIN)
-		pdata->hard_cold_temp_limit = info.temp_min;
+		smb->hard_cold_temp_limit = info.temp_min;
 
 	if (info.temp_max != INT_MAX)
-		pdata->hard_hot_temp_limit = info.temp_max;
+		smb->hard_hot_temp_limit = info.temp_max;
 
 	/* Suspend when battery temperature is outside hard limits */
-	if (pdata->hard_cold_temp_limit != SMB347_TEMP_USE_DEFAULT ||
-	    pdata->hard_hot_temp_limit != SMB347_TEMP_USE_DEFAULT)
-		pdata->suspend_on_hard_temp_limit = true;
+	if (smb->hard_cold_temp_limit != SMB3XX_TEMP_USE_DEFAULT ||
+	    smb->hard_hot_temp_limit != SMB3XX_TEMP_USE_DEFAULT)
+		smb->suspend_on_hard_temp_limit = true;
 
 	return 0;
 }
 
-static struct smb347_charger_platform_data
-			*smb347_get_platdata(struct device *dev)
-{
-	struct smb347_charger_platform_data *pdata;
-
-	if (dev->of_node) {
-		pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
-		if (pdata)
-			smb347_dt_parse_pdata(dev->of_node, pdata);
-	} else {
-		pdata = dev_get_platdata(dev);
-	}
-
-	return pdata;
-}
-
 static const struct regmap_config smb347_regmap = {
 	.reg_bits	= 8,
 	.val_bits	= 8,
@@ -1266,18 +1302,13 @@ static int smb347_probe(struct i2c_client *client,
 	smb = devm_kzalloc(dev, sizeof(*smb), GFP_KERNEL);
 	if (!smb)
 		return -ENOMEM;
-
-	smb->pdata = smb347_get_platdata(dev);
-	if (!smb->pdata)
-		return -ENODEV;
-
-	if (!smb->pdata->use_mains && !smb->pdata->use_usb)
-		return -EINVAL;
-
-	i2c_set_clientdata(client, smb);
-
 	smb->dev = &client->dev;
 	smb->id = id->driver_data;
+	i2c_set_clientdata(client, smb);
+
+	smb347_dt_parse_dev_info(smb);
+	if (!smb->use_mains && !smb->use_usb)
+		return -EINVAL;
 
 	smb->regmap = devm_regmap_init_i2c(client, &smb347_regmap);
 	if (IS_ERR(smb->regmap))
@@ -1285,14 +1316,14 @@ static int smb347_probe(struct i2c_client *client,
 
 	mains_usb_cfg.drv_data = smb;
 	mains_usb_cfg.of_node = dev->of_node;
-	if (smb->pdata->use_mains) {
+	if (smb->use_mains) {
 		smb->mains = devm_power_supply_register(dev, &smb347_mains_desc,
 							&mains_usb_cfg);
 		if (IS_ERR(smb->mains))
 			return PTR_ERR(smb->mains);
 	}
 
-	if (smb->pdata->use_usb) {
+	if (smb->use_usb) {
 		smb->usb = devm_power_supply_register(dev, &smb347_usb_desc,
 						      &mains_usb_cfg);
 		if (IS_ERR(smb->usb))
@@ -1311,7 +1342,7 @@ static int smb347_probe(struct i2c_client *client,
 	 * Interrupt pin is optional. If it is connected, we setup the
 	 * interrupt support here.
 	 */
-	if (smb->pdata->irq_gpio >= 0) {
+	if (client->irq) {
 		ret = smb347_irq_init(smb, client);
 		if (ret < 0) {
 			dev_warn(dev, "failed to initialize IRQ: %d\n", ret);
diff --git a/include/linux/power/smb347-charger.h b/include/linux/power/smb347-charger.h
deleted file mode 100644
index e0b687a4d20c..000000000000
--- a/include/linux/power/smb347-charger.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Summit Microelectronics SMB347 Battery Charger Driver
- *
- * Copyright (C) 2011, Intel Corporation
- *
- * Authors: Bruce E. Robertson <bruce.e.robertson@intel.com>
- *          Mika Westerberg <mika.westerberg@linux.intel.com>
- */
-
-#ifndef SMB347_CHARGER_H
-#define SMB347_CHARGER_H
-
-#include <linux/types.h>
-#include <linux/power_supply.h>
-
-enum {
-	/* use the default compensation method */
-	SMB347_SOFT_TEMP_COMPENSATE_DEFAULT = -1,
-
-	SMB347_SOFT_TEMP_COMPENSATE_NONE,
-	SMB347_SOFT_TEMP_COMPENSATE_CURRENT,
-	SMB347_SOFT_TEMP_COMPENSATE_VOLTAGE,
-};
-
-/* Use default factory programmed value for hard/soft temperature limit */
-#define SMB347_TEMP_USE_DEFAULT		-273
-
-/*
- * Charging enable can be controlled by software (via i2c) by
- * smb347-charger driver or by EN pin (active low/high).
- */
-enum smb347_chg_enable {
-	SMB347_CHG_ENABLE_SW,
-	SMB347_CHG_ENABLE_PIN_ACTIVE_LOW,
-	SMB347_CHG_ENABLE_PIN_ACTIVE_HIGH,
-};
-
-/**
- * struct smb347_charger_platform_data - platform data for SMB347 charger
- * @battery_info: Information about the battery
- * @max_charge_current: maximum current (in uA) the battery can be charged
- * @max_charge_voltage: maximum voltage (in uV) the battery can be charged
- * @pre_charge_current: current (in uA) to use in pre-charging phase
- * @termination_current: current (in uA) used to determine when the
- *			 charging cycle terminates
- * @pre_to_fast_voltage: voltage (in uV) treshold used for transitioning to
- *			 pre-charge to fast charge mode
- * @mains_current_limit: maximum input current drawn from AC/DC input (in uA)
- * @usb_hc_current_limit: maximum input high current (in uA) drawn from USB
- *			  input
- * @chip_temp_threshold: die temperature where device starts limiting charge
- *			 current [%100 - %130] (in degree C)
- * @soft_cold_temp_limit: soft cold temperature limit [%0 - %15] (in degree C),
- *			  granularity is 5 deg C.
- * @soft_hot_temp_limit: soft hot temperature limit [%40 - %55] (in degree  C),
- *			 granularity is 5 deg C.
- * @hard_cold_temp_limit: hard cold temperature limit [%-5 - %10] (in degree C),
- *			  granularity is 5 deg C.
- * @hard_hot_temp_limit: hard hot temperature limit [%50 - %65] (in degree C),
- *			 granularity is 5 deg C.
- * @suspend_on_hard_temp_limit: suspend charging when hard limit is hit
- * @soft_temp_limit_compensation: compensation method when soft temperature
- *				  limit is hit
- * @charge_current_compensation: current (in uA) for charging compensation
- *				 current when temperature hits soft limits
- * @use_mains: AC/DC input can be used
- * @use_usb: USB input can be used
- * @use_usb_otg: USB OTG output can be used (not implemented yet)
- * @irq_gpio: GPIO number used for interrupts (%-1 if not used)
- * @enable_control: how charging enable/disable is controlled
- *		    (driver/pin controls)
- *
- * @use_main, @use_usb, and @use_usb_otg are means to enable/disable
- * hardware support for these. This is useful when we want to have for
- * example OTG charging controlled via OTG transceiver driver and not by
- * the SMB347 hardware.
- *
- * Hard and soft temperature limit values are given as described in the
- * device data sheet and assuming NTC beta value is %3750. Even if this is
- * not the case, these values should be used. They can be mapped to the
- * corresponding NTC beta values with the help of table %2 in the data
- * sheet. So for example if NTC beta is %3375 and we want to program hard
- * hot limit to be %53 deg C, @hard_hot_temp_limit should be set to %50.
- *
- * If zero value is given in any of the current and voltage values, the
- * factory programmed default will be used. For soft/hard temperature
- * values, pass in %SMB347_TEMP_USE_DEFAULT instead.
- */
-struct smb347_charger_platform_data {
-	struct power_supply_info battery_info;
-	unsigned int	max_charge_current;
-	unsigned int	max_charge_voltage;
-	unsigned int	pre_charge_current;
-	unsigned int	termination_current;
-	unsigned int	pre_to_fast_voltage;
-	unsigned int	mains_current_limit;
-	unsigned int	usb_hc_current_limit;
-	unsigned int	chip_temp_threshold;
-	int		soft_cold_temp_limit;
-	int		soft_hot_temp_limit;
-	int		hard_cold_temp_limit;
-	int		hard_hot_temp_limit;
-	bool		suspend_on_hard_temp_limit;
-	unsigned int	soft_temp_limit_compensation;
-	unsigned int	charge_current_compensation;
-	bool		use_mains;
-	bool		use_usb;
-	bool		use_usb_otg;
-	int		irq_gpio;
-	enum smb347_chg_enable enable_control;
-};
-
-#endif /* SMB347_CHARGER_H */
-- 
cgit v1.2.3


From 9584051f3cf3af181e577960956bb7c085879b67 Mon Sep 17 00:00:00 2001
From: Jonghwa Lee <jonghwa3.lee@samsung.com>
Date: Thu, 14 May 2020 16:04:27 -0700
Subject: power: supply: charger-manager: Remove cm_notify_event function

cm_notify_event() was introduced to get an event associated with the
battery status externally (ie in board files), but no one ever used it.
Moreover it makes charger manager driver more complicated. Drop the
function and all data related to it to simplify the driver.

Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/charger-manager.c | 183 ++-------------------------------
 include/linux/power/charger-manager.h  |  33 ++----
 2 files changed, 16 insertions(+), 200 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c
index 1adaeefd90a4..c18dc8d3ae1c 100644
--- a/drivers/power/supply/charger-manager.c
+++ b/drivers/power/supply/charger-manager.c
@@ -434,25 +434,18 @@ static int try_charger_restart(struct charger_manager *cm)
 
 /**
  * fullbatt_vchk - Check voltage drop some times after "FULL" event.
- * @work: the work_struct appointing the function
  *
- * If a user has designated "fullbatt_vchkdrop_ms/uV" values with
+ * If a user has designated "fullbatt_vchkdrop_uV" values with
  * charger_desc, Charger Manager checks voltage drop after the battery
  * "FULL" event. It checks whether the voltage has dropped more than
  * fullbatt_vchkdrop_uV by calling this function after fullbatt_vchkrop_ms.
  */
-static void fullbatt_vchk(struct work_struct *work)
+static void fullbatt_vchk(struct charger_manager *cm)
 {
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct charger_manager *cm = container_of(dwork,
-			struct charger_manager, fullbatt_vchk_work);
 	struct charger_desc *desc = cm->desc;
 	int batt_uV, err, diff;
 
-	/* remove the appointment for fullbatt_vchk */
-	cm->fullbatt_vchk_jiffies_at = 0;
-
-	if (!desc->fullbatt_vchkdrop_uV || !desc->fullbatt_vchkdrop_ms)
+	if (!desc->fullbatt_vchkdrop_uV)
 		return;
 
 	err = get_batt_uV(cm, &batt_uV);
@@ -588,9 +581,11 @@ static int cm_check_thermal_status(struct charger_manager *cm)
 	}
 
 	if (temp > upper_limit)
-		ret = CM_EVENT_BATT_OVERHEAT;
+		ret = CM_BATT_OVERHEAT;
 	else if (temp < lower_limit)
-		ret = CM_EVENT_BATT_COLD;
+		ret = CM_BATT_COLD;
+	else
+		ret = CM_BATT_OK;
 
 	return ret;
 }
@@ -635,7 +630,7 @@ static bool _cm_monitor(struct charger_manager *cm)
 	 */
 	} else if (!cm->emergency_stop && is_ext_pwr_online(cm) &&
 			!cm->charger_enabled) {
-		fullbatt_vchk(&cm->fullbatt_vchk_work.work);
+		fullbatt_vchk(cm);
 
 	/*
 	 * Check whether fully charged state to protect overcharge
@@ -648,7 +643,7 @@ static bool _cm_monitor(struct charger_manager *cm)
 
 		try_charger_enable(cm, false);
 
-		fullbatt_vchk(&cm->fullbatt_vchk_work.work);
+		fullbatt_vchk(cm);
 	} else {
 		cm->emergency_stop = 0;
 		if (is_ext_pwr_online(cm)) {
@@ -750,66 +745,6 @@ static void cm_monitor_poller(struct work_struct *work)
 	schedule_work(&setup_polling);
 }
 
-/**
- * fullbatt_handler - Event handler for CM_EVENT_BATT_FULL
- * @cm: the Charger Manager representing the battery.
- */
-static void fullbatt_handler(struct charger_manager *cm)
-{
-	struct charger_desc *desc = cm->desc;
-
-	if (!desc->fullbatt_vchkdrop_uV || !desc->fullbatt_vchkdrop_ms)
-		goto out;
-
-	if (cm_suspended)
-		device_set_wakeup_capable(cm->dev, true);
-
-	mod_delayed_work(cm_wq, &cm->fullbatt_vchk_work,
-			 msecs_to_jiffies(desc->fullbatt_vchkdrop_ms));
-	cm->fullbatt_vchk_jiffies_at = jiffies + msecs_to_jiffies(
-				       desc->fullbatt_vchkdrop_ms);
-
-	if (cm->fullbatt_vchk_jiffies_at == 0)
-		cm->fullbatt_vchk_jiffies_at = 1;
-
-out:
-	dev_info(cm->dev, "EVENT_HANDLE: Battery Fully Charged\n");
-	power_supply_changed(cm->charger_psy);
-}
-
-/**
- * battout_handler - Event handler for CM_EVENT_BATT_OUT
- * @cm: the Charger Manager representing the battery.
- */
-static void battout_handler(struct charger_manager *cm)
-{
-	if (cm_suspended)
-		device_set_wakeup_capable(cm->dev, true);
-
-	if (!is_batt_present(cm)) {
-		dev_emerg(cm->dev, "Battery Pulled Out!\n");
-		power_supply_changed(cm->charger_psy);
-	} else {
-		power_supply_changed(cm->charger_psy);
-	}
-}
-
-/**
- * misc_event_handler - Handler for other events
- * @cm: the Charger Manager representing the battery.
- * @type: the Charger Manager representing the battery.
- */
-static void misc_event_handler(struct charger_manager *cm,
-			enum cm_event_types type)
-{
-	if (cm_suspended)
-		device_set_wakeup_capable(cm->dev, true);
-
-	if (is_polling_required(cm) && cm->desc->polling_interval_ms)
-		schedule_work(&setup_polling);
-	power_supply_changed(cm->charger_psy);
-}
-
 static int charger_get_property(struct power_supply *psy,
 		enum power_supply_property psp,
 		union power_supply_propval *val)
@@ -1000,21 +935,6 @@ static bool cm_setup_timer(void)
 
 	mutex_lock(&cm_list_mtx);
 	list_for_each_entry(cm, &cm_list, entry) {
-		unsigned int fbchk_ms = 0;
-
-		/* fullbatt_vchk is required. setup timer for that */
-		if (cm->fullbatt_vchk_jiffies_at) {
-			fbchk_ms = jiffies_to_msecs(cm->fullbatt_vchk_jiffies_at
-						    - jiffies);
-			if (time_is_before_eq_jiffies(
-				cm->fullbatt_vchk_jiffies_at) ||
-				msecs_to_jiffies(fbchk_ms) < CM_JIFFIES_SMALL) {
-				fullbatt_vchk(&cm->fullbatt_vchk_work.work);
-				fbchk_ms = 0;
-			}
-		}
-		CM_MIN_VALID(wakeup_ms, fbchk_ms);
-
 		/* Skip if polling is not required for this CM */
 		if (!is_polling_required(cm) && !cm->emergency_stop)
 			continue;
@@ -1422,8 +1342,6 @@ static struct charger_desc *of_cm_parse_desc(struct device *dev)
 	of_property_read_u32(np, "cm-poll-interval",
 				&desc->polling_interval_ms);
 
-	of_property_read_u32(np, "cm-fullbatt-vchkdrop-ms",
-					&desc->fullbatt_vchkdrop_ms);
 	of_property_read_u32(np, "cm-fullbatt-vchkdrop-volt",
 					&desc->fullbatt_vchkdrop_uV);
 	of_property_read_u32(np, "cm-fullbatt-voltage", &desc->fullbatt_uV);
@@ -1585,9 +1503,8 @@ static int charger_manager_probe(struct platform_device *pdev)
 	if (desc->fullbatt_uV == 0) {
 		dev_info(&pdev->dev, "Ignoring full-battery voltage threshold as it is not supplied\n");
 	}
-	if (!desc->fullbatt_vchkdrop_ms || !desc->fullbatt_vchkdrop_uV) {
+	if (!desc->fullbatt_vchkdrop_uV) {
 		dev_info(&pdev->dev, "Disabling full-battery voltage drop checking mechanism as it is not supplied\n");
-		desc->fullbatt_vchkdrop_ms = 0;
 		desc->fullbatt_vchkdrop_uV = 0;
 	}
 	if (desc->fullbatt_soc == 0) {
@@ -1693,8 +1610,6 @@ static int charger_manager_probe(struct platform_device *pdev)
 	cm->charger_psy_desc.properties = properties;
 	cm->charger_psy_desc.num_properties = num_properties;
 
-	INIT_DELAYED_WORK(&cm->fullbatt_vchk_work, fullbatt_vchk);
-
 	/* Register sysfs entry for charger(regulator) */
 	ret = charger_manager_prepare_sysfs(cm);
 	if (ret < 0) {
@@ -1834,8 +1749,6 @@ static bool cm_need_to_awake(void)
 
 static int cm_suspend_prepare(struct device *dev)
 {
-	struct charger_manager *cm = dev_get_drvdata(dev);
-
 	if (cm_need_to_awake())
 		return -EBUSY;
 
@@ -1847,7 +1760,6 @@ static int cm_suspend_prepare(struct device *dev)
 	if (cm_timer_set) {
 		cancel_work_sync(&setup_polling);
 		cancel_delayed_work_sync(&cm_monitor_work);
-		cancel_delayed_work(&cm->fullbatt_vchk_work);
 	}
 
 	return 0;
@@ -1872,31 +1784,6 @@ static void cm_suspend_complete(struct device *dev)
 
 	_cm_monitor(cm);
 
-	/* Re-enqueue delayed work (fullbatt_vchk_work) */
-	if (cm->fullbatt_vchk_jiffies_at) {
-		unsigned long delay = 0;
-		unsigned long now = jiffies + CM_JIFFIES_SMALL;
-
-		if (time_after_eq(now, cm->fullbatt_vchk_jiffies_at)) {
-			delay = (unsigned long)((long)now
-				- (long)(cm->fullbatt_vchk_jiffies_at));
-			delay = jiffies_to_msecs(delay);
-		} else {
-			delay = 0;
-		}
-
-		/*
-		 * Account for cm_suspend_duration_ms with assuming that
-		 * timer stops in suspend.
-		 */
-		if (delay > cm_suspend_duration_ms)
-			delay -= cm_suspend_duration_ms;
-		else
-			delay = 0;
-
-		queue_delayed_work(cm_wq, &cm->fullbatt_vchk_work,
-				   msecs_to_jiffies(delay));
-	}
 	device_set_wakeup_capable(cm->dev, false);
 }
 
@@ -1938,56 +1825,6 @@ static void __exit charger_manager_cleanup(void)
 }
 module_exit(charger_manager_cleanup);
 
-/**
- * cm_notify_event - charger driver notify Charger Manager of charger event
- * @psy: pointer to instance of charger's power_supply
- * @type: type of charger event
- * @msg: optional message passed to uevent_notify function
- */
-void cm_notify_event(struct power_supply *psy, enum cm_event_types type,
-		     char *msg)
-{
-	struct charger_manager *cm;
-	bool found_power_supply = false;
-
-	if (psy == NULL)
-		return;
-
-	mutex_lock(&cm_list_mtx);
-	list_for_each_entry(cm, &cm_list, entry) {
-		if (match_string(cm->desc->psy_charger_stat, -1,
-				 psy->desc->name) >= 0) {
-			found_power_supply = true;
-			break;
-		}
-	}
-	mutex_unlock(&cm_list_mtx);
-
-	if (!found_power_supply)
-		return;
-
-	switch (type) {
-	case CM_EVENT_BATT_FULL:
-		fullbatt_handler(cm);
-		break;
-	case CM_EVENT_BATT_OUT:
-		battout_handler(cm);
-		break;
-	case CM_EVENT_BATT_IN:
-	case CM_EVENT_EXT_PWR_IN_OUT ... CM_EVENT_CHG_START_STOP:
-		misc_event_handler(cm, type);
-		break;
-	case CM_EVENT_UNKNOWN:
-	case CM_EVENT_OTHERS:
-		power_supply_changed(cm->charger_psy);
-		break;
-	default:
-		dev_err(cm->dev, "%s: type not specified\n", __func__);
-		break;
-	}
-}
-EXPORT_SYMBOL_GPL(cm_notify_event);
-
 MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
 MODULE_DESCRIPTION("Charger Manager");
 MODULE_LICENSE("GPL");
diff --git a/include/linux/power/charger-manager.h b/include/linux/power/charger-manager.h
index ae94dcebd936..3a98837684e3 100644
--- a/include/linux/power/charger-manager.h
+++ b/include/linux/power/charger-manager.h
@@ -31,16 +31,10 @@ enum polling_modes {
 	CM_POLL_CHARGING_ONLY,
 };
 
-enum cm_event_types {
-	CM_EVENT_UNKNOWN = 0,
-	CM_EVENT_BATT_FULL,
-	CM_EVENT_BATT_IN,
-	CM_EVENT_BATT_OUT,
-	CM_EVENT_BATT_OVERHEAT,
-	CM_EVENT_BATT_COLD,
-	CM_EVENT_EXT_PWR_IN_OUT,
-	CM_EVENT_CHG_START_STOP,
-	CM_EVENT_OTHERS,
+enum cm_batt_temp {
+	CM_BATT_OK = 0,
+	CM_BATT_OVERHEAT,
+	CM_BATT_COLD,
 };
 
 /**
@@ -131,11 +125,10 @@ struct charger_regulator {
  * @psy_name: the name of power-supply-class for charger manager
  * @polling_mode:
  *	Determine which polling mode will be used
- * @fullbatt_vchkdrop_ms:
  * @fullbatt_vchkdrop_uV:
  *	Check voltage drop after the battery is fully charged.
- *	If it has dropped more than fullbatt_vchkdrop_uV after
- *	fullbatt_vchkdrop_ms, CM will restart charging.
+ *	If it has dropped more than fullbatt_vchkdrop_uV
+ *	CM will restart charging.
  * @fullbatt_uV: voltage in microvolt
  *	If VBATT >= fullbatt_uV, it is assumed to be full.
  * @fullbatt_soc: state of Charge in %
@@ -172,7 +165,6 @@ struct charger_desc {
 	enum polling_modes polling_mode;
 	unsigned int polling_interval_ms;
 
-	unsigned int fullbatt_vchkdrop_ms;
 	unsigned int fullbatt_vchkdrop_uV;
 	unsigned int fullbatt_uV;
 	unsigned int fullbatt_soc;
@@ -211,9 +203,6 @@ struct charger_desc {
  * @charger_stat: array of power_supply for chargers
  * @tzd_batt : thermal zone device for battery
  * @charger_enabled: the state of charger
- * @fullbatt_vchk_jiffies_at:
- *	jiffies at the time full battery check will occur.
- * @fullbatt_vchk_work: work queue for full battery check
  * @emergency_stop:
  *	When setting true, stop charging
  * @psy_name_buf: the name of power-supply-class for charger manager
@@ -235,9 +224,6 @@ struct charger_manager {
 #endif
 	bool charger_enabled;
 
-	unsigned long fullbatt_vchk_jiffies_at;
-	struct delayed_work fullbatt_vchk_work;
-
 	int emergency_stop;
 
 	char psy_name_buf[PSY_NAME_MAX + 1];
@@ -248,11 +234,4 @@ struct charger_manager {
 	u64 charging_end_time;
 };
 
-#if IS_ENABLED(CONFIG_CHARGER_MANAGER)
-extern void cm_notify_event(struct power_supply *psy,
-				enum cm_event_types type, char *msg);
-#else
-static inline void cm_notify_event(struct power_supply *psy,
-				enum cm_event_types type, char *msg) { }
-#endif
 #endif /* _CHARGER_MANAGER_H */
-- 
cgit v1.2.3


From e132fc6bb89bd307cfcdb8ba24afcd1985261485 Mon Sep 17 00:00:00 2001
From: Jonghwa Lee <jonghwa3.lee@samsung.com>
Date: Thu, 14 May 2020 16:04:31 -0700
Subject: power: supply: charger-manager: Make decisions focussed on battery
 status

cm_monitor(), where charging management starts, checks various charging
condition sequentially to decide next charging operation. However, as it
follows sequential process, cascaded if statements, it does some
jobs which have already done in the previous stage. This results in a
delay in decision making. Moreover, starting point of charging is spread
all around which makes maintain code and debugging difficult.

Both of the problems mentioned above become clean if it manages battery
charging focusing on battery status not following sequential condition
checking.  Now, cm_monitor() moves battery state diagram and does the
optimal operation for current state. As a result, it reduces whole
monitoring time almost in half.

Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/charger-manager.c | 181 +++++++++++----------------------
 include/linux/power/charger-manager.h  |   3 +
 2 files changed, 64 insertions(+), 120 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c
index cc8feb68694d..d10bf89328a0 100644
--- a/drivers/power/supply/charger-manager.c
+++ b/drivers/power/supply/charger-manager.c
@@ -271,6 +271,19 @@ static bool is_full_charged(struct charger_manager *cm)
 	if (!fuel_gauge)
 		return false;
 
+	/* Full, if it's over the fullbatt voltage */
+	if (desc->fullbatt_uV > 0) {
+		ret = get_batt_uV(cm, &uV);
+		if (!ret) {
+			/* Battery is already full, checks voltage drop. */
+			if (cm->battery_status == POWER_SUPPLY_STATUS_FULL
+					&& desc->fullbatt_vchkdrop_uV)
+				uV += desc->fullbatt_vchkdrop_uV;
+			if (uV >= desc->fullbatt_uV)
+				return true;
+		}
+	}
+
 	if (desc->fullbatt_full_capacity > 0) {
 		val.intval = 0;
 
@@ -283,15 +296,6 @@ static bool is_full_charged(struct charger_manager *cm)
 		}
 	}
 
-	/* Full, if it's over the fullbatt voltage */
-	if (desc->fullbatt_uV > 0) {
-		ret = get_batt_uV(cm, &uV);
-		if (!ret && uV >= desc->fullbatt_uV) {
-			is_full = true;
-			goto out;
-		}
-	}
-
 	/* Full, if the capacity is more than fullbatt_soc */
 	if (desc->fullbatt_soc > 0) {
 		val.intval = 0;
@@ -406,66 +410,12 @@ static int try_charger_enable(struct charger_manager *cm, bool enable)
 		}
 	}
 
-	if (!err) {
+	if (!err)
 		cm->charger_enabled = enable;
-		power_supply_changed(cm->charger_psy);
-	}
 
 	return err;
 }
 
-/**
- * try_charger_restart - Restart charging.
- * @cm: the Charger Manager representing the battery.
- *
- * Restart charging by turning off and on the charger.
- */
-static int try_charger_restart(struct charger_manager *cm)
-{
-	int err;
-
-	if (cm->emergency_stop)
-		return -EAGAIN;
-
-	err = try_charger_enable(cm, false);
-	if (err)
-		return err;
-
-	return try_charger_enable(cm, true);
-}
-
-/**
- * fullbatt_vchk - Check voltage drop some times after "FULL" event.
- *
- * If a user has designated "fullbatt_vchkdrop_uV" values with
- * charger_desc, Charger Manager checks voltage drop after the battery
- * "FULL" event. It checks whether the voltage has dropped more than
- * fullbatt_vchkdrop_uV by calling this function after fullbatt_vchkrop_ms.
- */
-static void fullbatt_vchk(struct charger_manager *cm)
-{
-	struct charger_desc *desc = cm->desc;
-	int batt_uV, err, diff;
-
-	if (!desc->fullbatt_vchkdrop_uV)
-		return;
-
-	err = get_batt_uV(cm, &batt_uV);
-	if (err) {
-		dev_err(cm->dev, "%s: get_batt_uV error(%d)\n", __func__, err);
-		return;
-	}
-
-	diff = desc->fullbatt_uV - batt_uV;
-	if (diff < 0)
-		return;
-
-	dev_info(cm->dev, "VBATT dropped %duV after full-batt\n", diff);
-
-	if (diff > desc->fullbatt_vchkdrop_uV)
-		try_charger_restart(cm);
-}
-
 /**
  * check_charging_duration - Monitor charging/discharging duration
  * @cm: the Charger Manager representing the battery.
@@ -493,17 +443,14 @@ static int check_charging_duration(struct charger_manager *cm)
 		if (duration > desc->charging_max_duration_ms) {
 			dev_info(cm->dev, "Charging duration exceed %ums\n",
 				 desc->charging_max_duration_ms);
-			try_charger_enable(cm, false);
 			ret = true;
 		}
-	} else if (is_ext_pwr_online(cm) && !cm->charger_enabled) {
+	} else if (cm->battery_status == POWER_SUPPLY_STATUS_NOT_CHARGING) {
 		duration = curr - cm->charging_end_time;
 
-		if (duration > desc->discharging_max_duration_ms &&
-				is_ext_pwr_online(cm)) {
+		if (duration > desc->charging_max_duration_ms) {
 			dev_info(cm->dev, "Discharging duration exceed %ums\n",
 				 desc->discharging_max_duration_ms);
-			try_charger_enable(cm, true);
 			ret = true;
 		}
 	}
@@ -585,9 +532,46 @@ static int cm_check_thermal_status(struct charger_manager *cm)
 	else
 		ret = CM_BATT_OK;
 
+	cm->emergency_stop = ret;
+
 	return ret;
 }
 
+/**
+ * cm_get_target_status - Check current status and get next target status.
+ * @cm: the Charger Manager representing the battery.
+ */
+static int cm_get_target_status(struct charger_manager *cm)
+{
+	if (!is_ext_pwr_online(cm))
+		return POWER_SUPPLY_STATUS_DISCHARGING;
+
+	if (cm_check_thermal_status(cm)) {
+		/* Check if discharging duration exeeds limit. */
+		if (check_charging_duration(cm))
+			goto charging_ok;
+		return POWER_SUPPLY_STATUS_NOT_CHARGING;
+	}
+
+	switch (cm->battery_status) {
+	case POWER_SUPPLY_STATUS_CHARGING:
+		/* Check if charging duration exeeds limit. */
+		if (check_charging_duration(cm))
+			return POWER_SUPPLY_STATUS_FULL;
+		fallthrough;
+	case POWER_SUPPLY_STATUS_FULL:
+		if (is_full_charged(cm))
+			return POWER_SUPPLY_STATUS_FULL;
+		fallthrough;
+	default:
+		break;
+	}
+
+charging_ok:
+	/* Charging is allowed. */
+	return POWER_SUPPLY_STATUS_CHARGING;
+}
+
 /**
  * _cm_monitor - Monitor the temperature and return true for exceptions.
  * @cm: the Charger Manager representing the battery.
@@ -597,56 +581,18 @@ static int cm_check_thermal_status(struct charger_manager *cm)
  */
 static bool _cm_monitor(struct charger_manager *cm)
 {
-	int temp_alrt;
+	int target;
 
-	temp_alrt = cm_check_thermal_status(cm);
+	target = cm_get_target_status(cm);
 
-	/* It has been stopped already */
-	if (temp_alrt && cm->emergency_stop)
-		return false;
-
-	/*
-	 * Check temperature whether overheat or cold.
-	 * If temperature is out of range normal state, stop charging.
-	 */
-	if (temp_alrt) {
-		cm->emergency_stop = temp_alrt;
-		try_charger_enable(cm, false);
-
-	/*
-	 * Check whole charging duration and discharging duration
-	 * after full-batt.
-	 */
-	} else if (!cm->emergency_stop && check_charging_duration(cm)) {
-		dev_dbg(cm->dev,
-			"Charging/Discharging duration is out of range\n");
-	/*
-	 * Check dropped voltage of battery. If battery voltage is more
-	 * dropped than fullbatt_vchkdrop_uV after fully charged state,
-	 * charger-manager have to recharge battery.
-	 */
-	} else if (!cm->emergency_stop && is_ext_pwr_online(cm) &&
-			!cm->charger_enabled) {
-		fullbatt_vchk(cm);
+	try_charger_enable(cm, (target == POWER_SUPPLY_STATUS_CHARGING));
 
-	/*
-	 * Check whether fully charged state to protect overcharge
-	 * if charger-manager is charging for battery.
-	 */
-	} else if (!cm->emergency_stop && is_full_charged(cm) &&
-			cm->charger_enabled) {
-		dev_info(cm->dev, "EVENT_HANDLE: Battery Fully Charged\n");
-		try_charger_enable(cm, false);
-
-		fullbatt_vchk(cm);
-	} else {
-		cm->emergency_stop = 0;
-		if (is_ext_pwr_online(cm)) {
-			try_charger_enable(cm, true);
-		}
+	if (cm->battery_status != target) {
+		cm->battery_status = target;
+		power_supply_changed(cm->charger_psy);
 	}
 
-	return true;
+	return (cm->battery_status == POWER_SUPPLY_STATUS_NOT_CHARGING);
 }
 
 /**
@@ -751,12 +697,7 @@ static int charger_get_property(struct power_supply *psy,
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_STATUS:
-		if (is_charging(cm))
-			val->intval = POWER_SUPPLY_STATUS_CHARGING;
-		else if (is_ext_pwr_online(cm))
-			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
-		else
-			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		val->intval = cm->battery_status;
 		break;
 	case POWER_SUPPLY_PROP_HEALTH:
 		if (cm->emergency_stop > 0)
diff --git a/include/linux/power/charger-manager.h b/include/linux/power/charger-manager.h
index 3a98837684e3..c127dbe31e49 100644
--- a/include/linux/power/charger-manager.h
+++ b/include/linux/power/charger-manager.h
@@ -213,6 +213,7 @@ struct charger_desc {
  *	saved status of battery before entering suspend-to-RAM
  * @charging_start_time: saved start time of enabling charging
  * @charging_end_time: saved end time of disabling charging
+ * @battery_status: Current battery status
  */
 struct charger_manager {
 	struct list_head entry;
@@ -232,6 +233,8 @@ struct charger_manager {
 
 	u64 charging_start_time;
 	u64 charging_end_time;
+
+	int battery_status;
 };
 
 #endif /* _CHARGER_MANAGER_H */
-- 
cgit v1.2.3


From c1f73028f75df43689feda4bc70573b7d18a618e Mon Sep 17 00:00:00 2001
From: Jonathan Bakker <xc-racer2@live.ca>
Date: Thu, 14 May 2020 16:04:33 -0700
Subject: power: supply: charger-manager: Update extcon functions

In commit 830ae442202e ("extcon: Remove the deprecated extcon functions")
the function extcon_register_interest became a no-op returning an error,
leading to non-functional behaviour in charger-manager.

Additionally, a translation table is needed between the text representation
of the extcon cable names and their IDs is needed.  In order to retain DT
compatibility, TA and CHARGE-DOWNSTREAM are added as they were present up
until commit 11eecf910bd8 ("extcon: Modify the id and name of external
connector")

Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/charger-manager.c | 82 +++++++++++++++++++++++++---------
 include/linux/power/charger-manager.h  |  5 ++-
 2 files changed, 63 insertions(+), 24 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c
index d3b2ed3ef720..5f536284d2ca 100644
--- a/drivers/power/supply/charger-manager.c
+++ b/drivers/power/supply/charger-manager.c
@@ -26,6 +26,29 @@
 #include <linux/of.h>
 #include <linux/thermal.h>
 
+static struct {
+	const char *name;
+	u64 extcon_type;
+} extcon_mapping[] = {
+	/* Current textual representations */
+	{ "USB", EXTCON_USB },
+	{ "USB-HOST", EXTCON_USB_HOST },
+	{ "SDP", EXTCON_CHG_USB_SDP },
+	{ "DCP", EXTCON_CHG_USB_DCP },
+	{ "CDP", EXTCON_CHG_USB_CDP },
+	{ "ACA", EXTCON_CHG_USB_ACA },
+	{ "FAST-CHARGER", EXTCON_CHG_USB_FAST },
+	{ "SLOW-CHARGER", EXTCON_CHG_USB_SLOW },
+	{ "WPT", EXTCON_CHG_WPT },
+	{ "PD", EXTCON_CHG_USB_PD },
+	{ "DOCK", EXTCON_DOCK },
+	{ "JIG", EXTCON_JIG },
+	{ "MECHANICAL", EXTCON_MECHANICAL },
+	/* Deprecated textual representations */
+	{ "TA", EXTCON_CHG_USB_SDP },
+	{ "CHARGE-DOWNSTREAM", EXTCON_CHG_USB_CDP },
+};
+
 /*
  * Default temperature threshold for charging.
  * Every temperature units are in tenth of centigrade.
@@ -950,7 +973,8 @@ static int charger_extcon_notifier(struct notifier_block *self,
 static int charger_extcon_init(struct charger_manager *cm,
 		struct charger_cable *cable)
 {
-	int ret;
+	int ret, i;
+	u64 extcon_type = EXTCON_NONE;
 
 	/*
 	 * Charger manager use Extcon framework to identify
@@ -959,14 +983,39 @@ static int charger_extcon_init(struct charger_manager *cm,
 	 */
 	INIT_WORK(&cable->wq, charger_extcon_work);
 	cable->nb.notifier_call = charger_extcon_notifier;
-	ret = extcon_register_interest(&cable->extcon_dev,
-			cable->extcon_name, cable->name, &cable->nb);
+
+	cable->extcon_dev = extcon_get_extcon_dev(cable->extcon_name);
+	if (IS_ERR_OR_NULL(cable->extcon_dev)) {
+		pr_err("Cannot find extcon_dev for %s (cable: %s)\n",
+			cable->extcon_name, cable->name);
+		if (cable->extcon_dev == NULL)
+			return -EPROBE_DEFER;
+		else
+			return PTR_ERR(cable->extcon_dev);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(extcon_mapping); i++) {
+		if (!strcmp(cable->name, extcon_mapping[i].name)) {
+			extcon_type = extcon_mapping[i].extcon_type;
+			break;
+		}
+	}
+	if (extcon_type == EXTCON_NONE) {
+		pr_err("Cannot find cable for type %s", cable->name);
+		return -EINVAL;
+	}
+
+	cable->extcon_type = extcon_type;
+
+	ret = devm_extcon_register_notifier(cm->dev, cable->extcon_dev,
+		cable->extcon_type, &cable->nb);
 	if (ret < 0) {
-		pr_info("Cannot register extcon_dev for %s(cable: %s)\n",
+		pr_err("Cannot register extcon_dev for %s (cable: %s)\n",
 			cable->extcon_name, cable->name);
+		return ret;
 	}
 
-	return ret;
+	return 0;
 }
 
 /**
@@ -983,6 +1032,7 @@ static int charger_manager_register_extcon(struct charger_manager *cm)
 {
 	struct charger_desc *desc = cm->desc;
 	struct charger_regulator *charger;
+	unsigned long event;
 	int ret;
 	int i;
 	int j;
@@ -1010,6 +1060,11 @@ static int charger_manager_register_extcon(struct charger_manager *cm)
 			}
 			cable->charger = charger;
 			cable->cm = cm;
+
+			event = extcon_get_state(cable->extcon_dev,
+				cable->extcon_type);
+			charger_extcon_notifier(&cable->nb,
+				event, NULL);
 		}
 	}
 
@@ -1370,7 +1425,6 @@ static int charger_manager_probe(struct platform_device *pdev)
 	struct charger_desc *desc = cm_get_drv_data(pdev);
 	struct charger_manager *cm;
 	int ret, i = 0;
-	int j = 0;
 	union power_supply_propval val;
 	struct power_supply *fuel_gauge;
 	enum power_supply_property *properties;
@@ -1572,12 +1626,6 @@ err_reg_extcon:
 		struct charger_regulator *charger;
 
 		charger = &desc->charger_regulators[i];
-		for (j = 0; j < charger->num_cables; j++) {
-			struct charger_cable *cable = &charger->cables[j];
-			/* Remove notifier block if only edev exists */
-			if (cable->extcon_dev.edev)
-				extcon_unregister_interest(&cable->extcon_dev);
-		}
 
 		regulator_put(desc->charger_regulators[i].consumer);
 	}
@@ -1592,7 +1640,6 @@ static int charger_manager_remove(struct platform_device *pdev)
 	struct charger_manager *cm = platform_get_drvdata(pdev);
 	struct charger_desc *desc = cm->desc;
 	int i = 0;
-	int j = 0;
 
 	/* Remove from the list */
 	mutex_lock(&cm_list_mtx);
@@ -1602,15 +1649,6 @@ static int charger_manager_remove(struct platform_device *pdev)
 	cancel_work_sync(&setup_polling);
 	cancel_delayed_work_sync(&cm_monitor_work);
 
-	for (i = 0 ; i < desc->num_charger_regulators ; i++) {
-		struct charger_regulator *charger
-				= &desc->charger_regulators[i];
-		for (j = 0 ; j < charger->num_cables ; j++) {
-			struct charger_cable *cable = &charger->cables[j];
-			extcon_unregister_interest(&cable->extcon_dev);
-		}
-	}
-
 	for (i = 0 ; i < desc->num_charger_regulators ; i++)
 		regulator_put(desc->charger_regulators[i].consumer);
 
diff --git a/include/linux/power/charger-manager.h b/include/linux/power/charger-manager.h
index c127dbe31e49..45e228b353ea 100644
--- a/include/linux/power/charger-manager.h
+++ b/include/linux/power/charger-manager.h
@@ -40,7 +40,7 @@ enum cm_batt_temp {
 /**
  * struct charger_cable
  * @extcon_name: the name of extcon device.
- * @name: the name of charger cable(external connector).
+ * @name: the name of the cable connector
  * @extcon_dev: the extcon device.
  * @wq: the workqueue to control charger according to the state of
  *	charger cable. If charger cable is attached, enable charger.
@@ -56,9 +56,10 @@ enum cm_batt_temp {
 struct charger_cable {
 	const char *extcon_name;
 	const char *name;
+	struct extcon_dev *extcon_dev;
+	u64 extcon_type;
 
 	/* The charger-manager use Extcon framework */
-	struct extcon_specific_cable_nb extcon_dev;
 	struct work_struct wq;
 	struct notifier_block nb;
 
-- 
cgit v1.2.3


From 41a7431dbaa37533c3b732cdea425a7b8f2d4162 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <krzk@kernel.org>
Date: Sat, 19 Sep 2020 16:04:18 +0200
Subject: power: supply: bq27xxx: add support for TI bq34z100

Add support for new device: the TI bq34z100-G1, a Wide Range Fuel Gauge
for Li-Ion, PbA, NiMH, and NiCd batteries.  The device shares a lot with
other models, although it has its own differences requiring new quirks.

This patch was tested on a system equipped with NiMH batteries.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/bq27xxx_battery.c     | 50 +++++++++++++++++++++++++++++-
 drivers/power/supply/bq27xxx_battery_i2c.c |  2 ++
 include/linux/power/bq27xxx_battery.h      |  1 +
 3 files changed, 52 insertions(+), 1 deletion(-)

(limited to 'include/linux')

diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index cda03e1f9586..315e0909e6a4 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -38,6 +38,7 @@
  * https://www.ti.com/product/bq27621-g1
  * https://www.ti.com/product/bq27z561
  * https://www.ti.com/product/bq28z610
+ * https://www.ti.com/product/bq34z100-g1
  */
 
 #include <linux/device.h>
@@ -476,6 +477,26 @@ static u8
 		[BQ27XXX_REG_DCAP] = 0x3c,
 		[BQ27XXX_REG_AP] = 0x22,
 		BQ27XXX_DM_REG_ROWS,
+	},
+	bq34z100_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x0c,
+		[BQ27XXX_REG_INT_TEMP] = 0x2a,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x0a,
+		[BQ27XXX_REG_FLAGS] = 0x0e,
+		[BQ27XXX_REG_TTE] = 0x18,
+		[BQ27XXX_REG_TTF] = 0x1a,
+		[BQ27XXX_REG_TTES] = 0x1e,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_FCC] = 0x06,
+		[BQ27XXX_REG_CYCT] = 0x2c,
+		[BQ27XXX_REG_AE] = 0x24,
+		[BQ27XXX_REG_SOC] = 0x02,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = 0x22,
+		BQ27XXX_DM_REG_ROWS,
 	};
 
 static enum power_supply_property bq27000_props[] = {
@@ -750,6 +771,27 @@ static enum power_supply_property bq28z610_props[] = {
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
+static enum power_supply_property bq34z100_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
 struct bq27xxx_dm_reg {
 	u8 subclass_id;
 	u8 offset;
@@ -857,6 +899,7 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
 #define BQ27Z561_O_BITS		BIT(5)
 #define BQ27XXX_O_SOC_SI	BIT(6) /* SoC is single register */
 #define BQ27XXX_O_HAS_CI	BIT(7) /* has Capacity Inaccurate flag */
+#define BQ27XXX_O_MUL_CHEM	BIT(8) /* multiple chemistries supported */
 
 #define BQ27XXX_DATA(ref, key, opt) {		\
 	.opts = (opt),				\
@@ -903,6 +946,8 @@ static struct {
 	[BQ27621]   = BQ27XXX_DATA(bq27621,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
 	[BQ27Z561]  = BQ27XXX_DATA(bq27z561,  0         , BQ27Z561_O_BITS),
 	[BQ28Z610]  = BQ27XXX_DATA(bq28z610,  0         , BQ27Z561_O_BITS),
+	[BQ34Z100]  = BQ27XXX_DATA(bq34z100,  0         , BQ27XXX_O_OTDC | BQ27XXX_O_SOC_SI | \
+							  BQ27XXX_O_HAS_CI | BQ27XXX_O_MUL_CHEM),
 };
 
 static DEFINE_MUTEX(bq27xxx_list_lock);
@@ -1914,7 +1959,10 @@ static int bq27xxx_battery_get_property(struct power_supply *psy,
 		ret = bq27xxx_simple_value(di->cache.time_to_full, val);
 		break;
 	case POWER_SUPPLY_PROP_TECHNOLOGY:
-		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		if (di->opts & BQ27XXX_O_MUL_CHEM)
+			val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+		else
+			val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
 		break;
 	case POWER_SUPPLY_PROP_CHARGE_NOW:
 		ret = bq27xxx_simple_value(bq27xxx_battery_read_nac(di), val);
diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
index 765873dfc495..eb4f4284982f 100644
--- a/drivers/power/supply/bq27xxx_battery_i2c.c
+++ b/drivers/power/supply/bq27xxx_battery_i2c.c
@@ -247,6 +247,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
 	{ "bq27621", BQ27621 },
 	{ "bq27z561", BQ27Z561 },
 	{ "bq28z610", BQ28Z610 },
+	{ "bq34z100", BQ34Z100 },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table);
@@ -282,6 +283,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
 	{ .compatible = "ti,bq27621" },
 	{ .compatible = "ti,bq27z561" },
 	{ .compatible = "ti,bq28z610" },
+	{ .compatible = "ti,bq34z100" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table);
diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
index 987d9652aa4e..111a40d0d3d5 100644
--- a/include/linux/power/bq27xxx_battery.h
+++ b/include/linux/power/bq27xxx_battery.h
@@ -32,6 +32,7 @@ enum bq27xxx_chip {
 	BQ27621,
 	BQ27Z561,
 	BQ28Z610,
+	BQ34Z100,
 };
 
 struct bq27xxx_device_info;
-- 
cgit v1.2.3