From 651728507140246e9cf4e809f1877cb2eddbc84e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 13 Aug 2012 10:56:43 +0200 Subject: pinctrl/coh901: move header to platform data dir Move the platform-specific COH901 pin control header out of the ARM tree and down into the proper platform data include directory. Signed-off-by: Linus Walleij --- include/linux/platform_data/pinctrl-coh901.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 include/linux/platform_data/pinctrl-coh901.h (limited to 'include/linux') diff --git a/include/linux/platform_data/pinctrl-coh901.h b/include/linux/platform_data/pinctrl-coh901.h new file mode 100644 index 000000000000..30dea251b835 --- /dev/null +++ b/include/linux/platform_data/pinctrl-coh901.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2007-2012 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * GPIO block resgister definitions and inline macros for + * U300 GPIO COH 901 335 or COH 901 571/3 + * Author: Linus Walleij + */ + +#ifndef __MACH_U300_GPIO_U300_H +#define __MACH_U300_GPIO_U300_H + +/** + * struct u300_gpio_platform - U300 GPIO platform data + * @ports: number of GPIO block ports + * @gpio_base: first GPIO number for this block (use a free range) + * @gpio_irq_base: first GPIO IRQ number for this block (use a free range) + * @pinctrl_device: pin control device to spawn as child + */ +struct u300_gpio_platform { + u8 ports; + int gpio_base; + int gpio_irq_base; + struct platform_device *pinctrl_device; +}; + +#endif /* __MACH_U300_GPIO_U300_H */ -- cgit v1.2.3 From f9a6aa4303bd15bbdb24d9fe374e4e6850298460 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 6 Aug 2012 18:32:08 +0200 Subject: clk: convert ARM RealView to common clk This converts the ARM RealView machine over to using the common clock. The approach is similar to the one used for the Integrator, and we're reusing the ICST wrapper code. We have to put the clock intialization in the timer init function for the clocks to be available when initializing the timer, keeping them in early_init() is too early for the common clk. Since we now have to go down and compile drivers/clk/versatile a CONFIG_COMMON_CLK_VERSATILE symbol has been added so the proper code gets compiled into the kernel for either machine. A leftover CLK_VERSATILE in the Integrator Kconfig was fixed up to use the new symbol as well. Tested on ARM RealView PB1176. Cc: Pawel Moll Signed-off-by: Linus Walleij Signed-off-by: Mike Turquette --- arch/arm/Kconfig | 7 +- arch/arm/mach-realview/core.c | 106 ------------------------- arch/arm/mach-realview/include/mach/clkdev.h | 16 ---- arch/arm/mach-realview/realview_eb.c | 2 + arch/arm/mach-realview/realview_pb1176.c | 2 + arch/arm/mach-realview/realview_pb11mp.c | 2 + arch/arm/mach-realview/realview_pba8.c | 2 + arch/arm/mach-realview/realview_pbx.c | 2 + drivers/clk/Kconfig | 7 ++ drivers/clk/Makefile | 2 +- drivers/clk/versatile/Makefile | 1 + drivers/clk/versatile/clk-realview.c | 114 +++++++++++++++++++++++++++ include/linux/platform_data/clk-realview.h | 1 + 13 files changed, 137 insertions(+), 127 deletions(-) delete mode 100644 arch/arm/mach-realview/include/mach/clkdev.h create mode 100644 drivers/clk/versatile/clk-realview.c create mode 100644 include/linux/platform_data/clk-realview.h (limited to 'include/linux') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index fb6014868d33..1a01ffa331d0 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -273,7 +273,7 @@ config ARCH_INTEGRATOR select ARM_AMBA select ARCH_HAS_CPUFREQ select COMMON_CLK - select CLK_VERSATILE + select COMMON_CLK_VERSATILE select HAVE_TCM select ICST select GENERIC_CLOCKEVENTS @@ -289,13 +289,12 @@ config ARCH_INTEGRATOR config ARCH_REALVIEW bool "ARM Ltd. RealView family" select ARM_AMBA - select CLKDEV_LOOKUP - select HAVE_MACH_CLKDEV + select COMMON_CLK + select COMMON_CLK_VERSATILE select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB select PLAT_VERSATILE - select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_CLCD select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 45868bb43cbd..ff007d15e0ec 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include @@ -226,115 +225,10 @@ struct mmci_platform_data realview_mmc1_plat_data = { .cd_invert = true, }; -/* - * Clock handling - */ -static const struct icst_params realview_oscvco_params = { - .ref = 24000000, - .vco_max = ICST307_VCO_MAX, - .vco_min = ICST307_VCO_MIN, - .vd_min = 4 + 8, - .vd_max = 511 + 8, - .rd_min = 1 + 2, - .rd_max = 127 + 2, - .s2div = icst307_s2div, - .idx2s = icst307_idx2s, -}; - -static void realview_oscvco_set(struct clk *clk, struct icst_vco vco) -{ - void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET; - u32 val; - - val = readl(clk->vcoreg) & ~0x7ffff; - val |= vco.v | (vco.r << 9) | (vco.s << 16); - - writel(0xa05f, sys_lock); - writel(val, clk->vcoreg); - writel(0, sys_lock); -} - -static const struct clk_ops oscvco_clk_ops = { - .round = icst_clk_round, - .set = icst_clk_set, - .setvco = realview_oscvco_set, -}; - -static struct clk oscvco_clk = { - .ops = &oscvco_clk_ops, - .params = &realview_oscvco_params, -}; - -/* - * These are fixed clocks. - */ -static struct clk ref24_clk = { - .rate = 24000000, -}; - -static struct clk sp804_clk = { - .rate = 1000000, -}; - -static struct clk dummy_apb_pclk; - -static struct clk_lookup lookups[] = { - { /* Bus clock */ - .con_id = "apb_pclk", - .clk = &dummy_apb_pclk, - }, { /* UART0 */ - .dev_id = "dev:uart0", - .clk = &ref24_clk, - }, { /* UART1 */ - .dev_id = "dev:uart1", - .clk = &ref24_clk, - }, { /* UART2 */ - .dev_id = "dev:uart2", - .clk = &ref24_clk, - }, { /* UART3 */ - .dev_id = "fpga:uart3", - .clk = &ref24_clk, - }, { /* UART3 is on the dev chip in PB1176 */ - .dev_id = "dev:uart3", - .clk = &ref24_clk, - }, { /* UART4 only exists in PB1176 */ - .dev_id = "fpga:uart4", - .clk = &ref24_clk, - }, { /* KMI0 */ - .dev_id = "fpga:kmi0", - .clk = &ref24_clk, - }, { /* KMI1 */ - .dev_id = "fpga:kmi1", - .clk = &ref24_clk, - }, { /* MMC0 */ - .dev_id = "fpga:mmc0", - .clk = &ref24_clk, - }, { /* CLCD is in the PB1176 and EB DevChip */ - .dev_id = "dev:clcd", - .clk = &oscvco_clk, - }, { /* PB:CLCD */ - .dev_id = "issp:clcd", - .clk = &oscvco_clk, - }, { /* SSP */ - .dev_id = "dev:ssp0", - .clk = &ref24_clk, - }, { /* SP804 timers */ - .dev_id = "sp804", - .clk = &sp804_clk, - }, -}; - void __init realview_init_early(void) { void __iomem *sys = __io_address(REALVIEW_SYS_BASE); - if (machine_is_realview_pb1176()) - oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC0_OFFSET; - else - oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC4_OFFSET; - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000); } diff --git a/arch/arm/mach-realview/include/mach/clkdev.h b/arch/arm/mach-realview/include/mach/clkdev.h deleted file mode 100644 index e58d0771b64e..000000000000 --- a/arch/arm/mach-realview/include/mach/clkdev.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#include - -struct clk { - unsigned long rate; - const struct clk_ops *ops; - const struct icst_params *params; - void __iomem *vcoreg; -}; - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index baf382c5e776..a33e33b76733 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -414,6 +415,7 @@ static void __init realview_eb_timer_init(void) else timer_irq = IRQ_EB_TIMER0_1; + realview_clk_init(__io_address(REALVIEW_SYS_BASE), false); realview_timer_init(timer_irq); realview_eb_twd_init(); } diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index b1d7cafa1a6d..f0298cbc203e 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -326,6 +327,7 @@ static void __init realview_pb1176_timer_init(void) timer2_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE); timer3_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE) + 0x20; + realview_clk_init(__io_address(REALVIEW_SYS_BASE), true); realview_timer_init(IRQ_DC1176_TIMER0); } diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index a98c536e3327..1f019f76f7b5 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -312,6 +313,7 @@ static void __init realview_pb11mp_timer_init(void) timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE); timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20; + realview_clk_init(__io_address(REALVIEW_SYS_BASE), false); realview_timer_init(IRQ_TC11MP_TIMER0_1); realview_pb11mp_twd_init(); } diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 59650174e6ed..5032775dbfee 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -261,6 +262,7 @@ static void __init realview_pba8_timer_init(void) timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE); timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20; + realview_clk_init(__io_address(REALVIEW_SYS_BASE), false); realview_timer_init(IRQ_PBA8_TIMER0_1); } diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 3f2f605624e9..de64ba0ddb95 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -320,6 +321,7 @@ static void __init realview_pbx_timer_init(void) timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE); timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20; + realview_clk_init(__io_address(REALVIEW_SYS_BASE), false); realview_timer_init(IRQ_PBX_TIMER0_1); realview_pbx_twd_init(); } diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 7f0b5ca78516..89b726d1afe5 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -40,4 +40,11 @@ config COMMON_CLK_WM831X Supports the clocking subsystem of the WM831x/2x series of PMICs from Wolfson Microlectronics. +config COMMON_CLK_VERSATILE + tristate "Clock driver for ARM Reference designs" + depends on ARCH_INTEGRATOR || ARCH_REALVIEW + ---help--- + Supports clocking on ARM Reference designs Integrator/AP, + Integrator/CP, RealView PB1176, EB, PB11MP and PBX. + endmenu diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index d4c7253eb307..e30376c4ff5d 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -9,7 +9,7 @@ obj-$(CONFIG_ARCH_MXS) += mxs/ obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/ obj-$(CONFIG_PLAT_SPEAR) += spear/ obj-$(CONFIG_ARCH_U300) += clk-u300.o -obj-$(CONFIG_ARCH_INTEGRATOR) += versatile/ +obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/ obj-$(CONFIG_ARCH_PRIMA2) += clk-prima2.o # Chip specific diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile index 50cf6a2ee693..c0a0f6478798 100644 --- a/drivers/clk/versatile/Makefile +++ b/drivers/clk/versatile/Makefile @@ -1,3 +1,4 @@ # Makefile for Versatile-specific clocks obj-$(CONFIG_ICST) += clk-icst.o obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o +obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o diff --git a/drivers/clk/versatile/clk-realview.c b/drivers/clk/versatile/clk-realview.c new file mode 100644 index 000000000000..e21a99cef378 --- /dev/null +++ b/drivers/clk/versatile/clk-realview.c @@ -0,0 +1,114 @@ +#include +#include +#include +#include +#include + +#include +#include + +#include "clk-icst.h" + +/* + * Implementation of the ARM RealView clock trees. + */ + +static void __iomem *sys_lock; +static void __iomem *sys_vcoreg; + +/** + * realview_oscvco_get() - get ICST OSC settings for the RealView + */ +static struct icst_vco realview_oscvco_get(void) +{ + u32 val; + struct icst_vco vco; + + val = readl(sys_vcoreg); + vco.v = val & 0x1ff; + vco.r = (val >> 9) & 0x7f; + vco.s = (val >> 16) & 03; + return vco; +} + +static void realview_oscvco_set(struct icst_vco vco) +{ + u32 val; + + val = readl(sys_vcoreg) & ~0x7ffff; + val |= vco.v | (vco.r << 9) | (vco.s << 16); + + /* This magic unlocks the CM VCO so it can be controlled */ + writel(0xa05f, sys_lock); + writel(val, sys_vcoreg); + /* This locks the CM again */ + writel(0, sys_lock); +} + +static const struct icst_params realview_oscvco_params = { + .ref = 24000000, + .vco_max = ICST307_VCO_MAX, + .vco_min = ICST307_VCO_MIN, + .vd_min = 4 + 8, + .vd_max = 511 + 8, + .rd_min = 1 + 2, + .rd_max = 127 + 2, + .s2div = icst307_s2div, + .idx2s = icst307_idx2s, +}; + +static const struct clk_icst_desc __initdata realview_icst_desc = { + .params = &realview_oscvco_params, + .getvco = realview_oscvco_get, + .setvco = realview_oscvco_set, +}; + +/* + * realview_clk_init() - set up the RealView clock tree + */ +void __init realview_clk_init(void __iomem *sysbase, bool is_pb1176) +{ + struct clk *clk; + + sys_lock = sysbase + REALVIEW_SYS_LOCK_OFFSET; + if (is_pb1176) + sys_vcoreg = sysbase + REALVIEW_SYS_OSC0_OFFSET; + else + sys_vcoreg = sysbase + REALVIEW_SYS_OSC4_OFFSET; + + + /* APB clock dummy */ + clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); + clk_register_clkdev(clk, "apb_pclk", NULL); + + /* 24 MHz clock */ + clk = clk_register_fixed_rate(NULL, "clk24mhz", NULL, CLK_IS_ROOT, + 24000000); + clk_register_clkdev(clk, NULL, "dev:uart0"); + clk_register_clkdev(clk, NULL, "dev:uart1"); + clk_register_clkdev(clk, NULL, "dev:uart2"); + clk_register_clkdev(clk, NULL, "fpga:kmi0"); + clk_register_clkdev(clk, NULL, "fpga:kmi1"); + clk_register_clkdev(clk, NULL, "fpga:mmc0"); + clk_register_clkdev(clk, NULL, "dev:ssp0"); + if (is_pb1176) { + /* + * UART3 is on the dev chip in PB1176 + * UART4 only exists in PB1176 + */ + clk_register_clkdev(clk, NULL, "dev:uart3"); + clk_register_clkdev(clk, NULL, "dev:uart4"); + } else + clk_register_clkdev(clk, NULL, "fpga:uart3"); + + + /* 1 MHz clock */ + clk = clk_register_fixed_rate(NULL, "clk1mhz", NULL, CLK_IS_ROOT, + 1000000); + clk_register_clkdev(clk, NULL, "sp804"); + + /* ICST VCO clock */ + clk = icst_clk_register(NULL, &realview_icst_desc); + clk_register_clkdev(clk, NULL, "dev:clcd"); + clk_register_clkdev(clk, NULL, "issp:clcd"); +} diff --git a/include/linux/platform_data/clk-realview.h b/include/linux/platform_data/clk-realview.h new file mode 100644 index 000000000000..2e426a7dbc51 --- /dev/null +++ b/include/linux/platform_data/clk-realview.h @@ -0,0 +1 @@ +void realview_clk_init(void __iomem *sysbase, bool is_pb1176); -- cgit v1.2.3 From 9394b80c35760d13492a3a895add2891bc64bf86 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 4 Sep 2012 14:43:39 -0600 Subject: regulator: tps6586x: add support for SYS rail Device have SYS rail which is always ON. It is system power bus. LDO5 and LDO_RTC get powered through this rail internally. Add support for this rail and make the LDO5/LDO_RTC supply by it. Update document accordingly. [swarren: Instantiate the sys regulator from board-harmony-power.c to avoid regression.] Signed-off-by: Laxman Dewangan Signed-off-by: Stephen Warren Signed-off-by: Mark Brown --- .../devicetree/bindings/regulator/tps6586x.txt | 65 +++++++++++++--------- arch/arm/mach-tegra/board-harmony-power.c | 12 +++- drivers/mfd/tps6586x.c | 13 +++++ drivers/regulator/tps6586x-regulator.c | 20 ++++++- include/linux/mfd/tps6586x.h | 1 + 5 files changed, 81 insertions(+), 30 deletions(-) (limited to 'include/linux') diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt index da80c2ae0915..a2436e1edfc1 100644 --- a/Documentation/devicetree/bindings/regulator/tps6586x.txt +++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt @@ -8,7 +8,8 @@ Required properties: - gpio-controller: mark the device as a GPIO controller - regulators: list of regulators provided by this controller, must have property "regulator-compatible" to match their hardware counterparts: - sm[0-2], ldo[0-9] and ldo_rtc + sys, sm[0-2], ldo[0-9] and ldo_rtc +- sys-supply: The input supply for SYS. - vin-sm0-supply: The input supply for the SM0. - vin-sm1-supply: The input supply for the SM1. - vin-sm2-supply: The input supply for the SM2. @@ -20,6 +21,9 @@ Required properties: Each regulator is defined using the standard binding for regulators. +Note: LDO5 and LDO_RTC is supplied by SYS regulator internally and driver + take care of making proper parent child relationship. + Example: pmu: tps6586x@34 { @@ -30,6 +34,7 @@ Example: #gpio-cells = <2>; gpio-controller; + sys-supply = <&some_reg>; vin-sm0-supply = <&some_reg>; vin-sm1-supply = <&some_reg>; vin-sm2-supply = <&some_reg>; @@ -43,8 +48,16 @@ Example: #address-cells = <1>; #size-cells = <0>; - sm0_reg: regulator@0 { + sys_reg: regulator@0 { reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-boot-on; + regulator-always-on; + }; + + sm0_reg: regulator@1 { + reg = <1>; regulator-compatible = "sm0"; regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; @@ -52,8 +65,8 @@ Example: regulator-always-on; }; - sm1_reg: regulator@1 { - reg = <1>; + sm1_reg: regulator@2 { + reg = <2>; regulator-compatible = "sm1"; regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; @@ -61,8 +74,8 @@ Example: regulator-always-on; }; - sm2_reg: regulator@2 { - reg = <2>; + sm2_reg: regulator@3 { + reg = <3>; regulator-compatible = "sm2"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <4550000>; @@ -70,72 +83,72 @@ Example: regulator-always-on; }; - ldo0_reg: regulator@3 { - reg = <3>; + ldo0_reg: regulator@4 { + reg = <4>; regulator-compatible = "ldo0"; regulator-name = "PCIE CLK"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo1_reg: regulator@4 { - reg = <4>; + ldo1_reg: regulator@5 { + reg = <5>; regulator-compatible = "ldo1"; regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; }; - ldo2_reg: regulator@5 { - reg = <5>; + ldo2_reg: regulator@6 { + reg = <6>; regulator-compatible = "ldo2"; regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; }; - ldo3_reg: regulator@6 { - reg = <6>; + ldo3_reg: regulator@7 { + reg = <7>; regulator-compatible = "ldo3"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo4_reg: regulator@7 { - reg = <7>; + ldo4_reg: regulator@8 { + reg = <8>; regulator-compatible = "ldo4"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <2475000>; }; - ldo5_reg: regulator@8 { - reg = <8>; + ldo5_reg: regulator@9 { + reg = <9>; regulator-compatible = "ldo5"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo6_reg: regulator@9 { - reg = <9>; + ldo6_reg: regulator@10 { + reg = <10>; regulator-compatible = "ldo6"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo7_reg: regulator@10 { - reg = <10>; + ldo7_reg: regulator@11 { + reg = <11>; regulator-compatible = "ldo7"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo8_reg: regulator@11 { - reg = <11>; + ldo8_reg: regulator@12 { + reg = <12>; regulator-compatible = "ldo8"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo9_reg: regulator@12 { - reg = <12>; + ldo9_reg: regulator@13 { + reg = <13>; regulator-compatible = "ldo9"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c index b7344beec102..94486e7e9dfd 100644 --- a/arch/arm/mach-tegra/board-harmony-power.c +++ b/arch/arm/mach-tegra/board-harmony-power.c @@ -67,6 +67,13 @@ static struct regulator_init_data ldo0_data = { }, \ } +static struct regulator_init_data sys_data = { + .supply_regulator = "vdd_5v0", + .constraints = { + .name = "vdd_sys", + }, +}; + HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500, 1); HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500, 1); HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550, 1); @@ -74,7 +81,7 @@ HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500, 1); HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500, 0); HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300, 1); HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475, 1); -HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300, 1); +HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", "vdd_sys", 1250, 3300, 1); HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300, 0); HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300, 0); HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300, 0); @@ -88,6 +95,7 @@ HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300, 1); } static struct tps6586x_subdev_info tps_devs[] = { + TPS_REG(SYS, &sys_data), TPS_REG(SM_0, &sm0_data), TPS_REG(SM_1, &sm1_data), TPS_REG(SM_2, &sm2_data), @@ -120,7 +128,7 @@ static struct i2c_board_info __initdata harmony_regulators[] = { int __init harmony_regulator_init(void) { - regulator_register_always_on(0, "vdd_sys", + regulator_register_always_on(0, "vdd_5v0", NULL, 0, 5000000); if (machine_is_harmony()) { diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c index 353c34812120..380a3c886d31 100644 --- a/drivers/mfd/tps6586x.c +++ b/drivers/mfd/tps6586x.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -346,6 +347,7 @@ failed: #ifdef CONFIG_OF static struct of_regulator_match tps6586x_matches[] = { + { .name = "sys", .driver_data = (void *)TPS6586X_ID_SYS }, { .name = "sm0", .driver_data = (void *)TPS6586X_ID_SM_0 }, { .name = "sm1", .driver_data = (void *)TPS6586X_ID_SM_1 }, { .name = "sm2", .driver_data = (void *)TPS6586X_ID_SM_2 }, @@ -369,6 +371,7 @@ static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *clien struct tps6586x_platform_data *pdata; struct tps6586x_subdev_info *devs; struct device_node *regs; + const char *sys_rail_name = NULL; unsigned int count; unsigned int i, j; int err; @@ -391,12 +394,22 @@ static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *clien return NULL; for (i = 0, j = 0; i < num && j < count; i++) { + struct regulator_init_data *reg_idata; + if (!tps6586x_matches[i].init_data) continue; + reg_idata = tps6586x_matches[i].init_data; devs[j].name = "tps6586x-regulator"; devs[j].platform_data = tps6586x_matches[i].init_data; devs[j].id = (int)tps6586x_matches[i].driver_data; + if (devs[j].id == TPS6586X_ID_SYS) + sys_rail_name = reg_idata->constraints.name; + + if ((devs[j].id == TPS6586X_ID_LDO_5) || + (devs[j].id == TPS6586X_ID_LDO_RTC)) + reg_idata->supply_regulator = sys_rail_name; + devs[j].of_node = tps6586x_matches[i].of_node; j++; } diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c index 19241fc30050..82125269b667 100644 --- a/drivers/regulator/tps6586x-regulator.c +++ b/drivers/regulator/tps6586x-regulator.c @@ -162,6 +162,9 @@ static struct regulator_ops tps6586x_regulator_ops = { .disable = tps6586x_regulator_disable, }; +static struct regulator_ops tps6586x_sys_regulator_ops = { +}; + static const unsigned int tps6586x_ldo0_voltages[] = { 1200000, 1500000, 1800000, 2500000, 2700000, 2850000, 3100000, 3300000, }; @@ -230,15 +233,28 @@ static const unsigned int tps6586x_dvm_voltages[] = { TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \ } +#define TPS6586X_SYS_REGULATOR() \ +{ \ + .desc = { \ + .supply_name = "sys", \ + .name = "REG-SYS", \ + .ops = &tps6586x_sys_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = TPS6586X_ID_SYS, \ + .owner = THIS_MODULE, \ + }, \ +} + static struct tps6586x_regulator tps6586x_regulator[] = { + TPS6586X_SYS_REGULATOR(), TPS6586X_LDO(LDO_0, "vinldo01", ldo0, SUPPLYV1, 5, 3, ENC, 0, END, 0), TPS6586X_LDO(LDO_3, "vinldo23", ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2), - TPS6586X_LDO(LDO_5, NULL, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6), + TPS6586X_LDO(LDO_5, "REG-SYS", ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6), TPS6586X_LDO(LDO_6, "vinldo678", ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4), TPS6586X_LDO(LDO_7, "vinldo678", ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5), TPS6586X_LDO(LDO_8, "vinldo678", ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6), TPS6586X_LDO(LDO_9, "vinldo9", ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7), - TPS6586X_LDO(LDO_RTC, NULL, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7), + TPS6586X_LDO(LDO_RTC, "REG-SYS", ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7), TPS6586X_LDO(LDO_1, "vinldo01", dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1), TPS6586X_LDO(SM_2, "vin-sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7), diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h index f350fd0ba1df..94514710a03f 100644 --- a/include/linux/mfd/tps6586x.h +++ b/include/linux/mfd/tps6586x.h @@ -14,6 +14,7 @@ #define TPS6586X_SLEW_RATE_MASK 0x07 enum { + TPS6586X_ID_SYS, TPS6586X_ID_SM_0, TPS6586X_ID_SM_1, TPS6586X_ID_SM_2, -- cgit v1.2.3 From bce5afd8d960e78892669b68751547015646d5e4 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 27 Aug 2012 15:45:51 +0200 Subject: clk: ux500: First version of clock definitions for ux500 In this first version of the clock definitions, the structure for ux500 are set. Support for u8500, u9540 and u8540 are prepared. Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Signed-off-by: Mike Turquette --- drivers/clk/ux500/Makefile | 5 +++++ drivers/clk/ux500/u8500_clk.c | 21 +++++++++++++++++++++ drivers/clk/ux500/u8540_clk.c | 21 +++++++++++++++++++++ drivers/clk/ux500/u9540_clk.c | 21 +++++++++++++++++++++ include/linux/platform_data/clk-ux500.h | 17 +++++++++++++++++ 5 files changed, 85 insertions(+) create mode 100644 drivers/clk/ux500/u8500_clk.c create mode 100644 drivers/clk/ux500/u8540_clk.c create mode 100644 drivers/clk/ux500/u9540_clk.c create mode 100644 include/linux/platform_data/clk-ux500.h (limited to 'include/linux') diff --git a/drivers/clk/ux500/Makefile b/drivers/clk/ux500/Makefile index a3ccd1b4cfcd..858fbfe66281 100644 --- a/drivers/clk/ux500/Makefile +++ b/drivers/clk/ux500/Makefile @@ -5,3 +5,8 @@ # Clock types obj-y += clk-prcc.o obj-y += clk-prcmu.o + +# Clock definitions +obj-y += u8500_clk.o +obj-y += u9540_clk.o +obj-y += u8540_clk.o diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c new file mode 100644 index 000000000000..2bc4901599ed --- /dev/null +++ b/drivers/clk/ux500/u8500_clk.c @@ -0,0 +1,21 @@ +/* + * Clock definitions for u8500 platform. + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include +#include +#include +#include +#include + +#include "clk.h" + +void u8500_clk_init(void) +{ + /* register clocks here */ +} diff --git a/drivers/clk/ux500/u8540_clk.c b/drivers/clk/ux500/u8540_clk.c new file mode 100644 index 000000000000..10adfd2ead21 --- /dev/null +++ b/drivers/clk/ux500/u8540_clk.c @@ -0,0 +1,21 @@ +/* + * Clock definitions for u8540 platform. + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include +#include +#include +#include +#include + +#include "clk.h" + +void u8540_clk_init(void) +{ + /* register clocks here */ +} diff --git a/drivers/clk/ux500/u9540_clk.c b/drivers/clk/ux500/u9540_clk.c new file mode 100644 index 000000000000..dbc0191e16c8 --- /dev/null +++ b/drivers/clk/ux500/u9540_clk.c @@ -0,0 +1,21 @@ +/* + * Clock definitions for u9540 platform. + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include +#include +#include +#include +#include + +#include "clk.h" + +void u9540_clk_init(void) +{ + /* register clocks here */ +} diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h new file mode 100644 index 000000000000..3af0da1f3be5 --- /dev/null +++ b/include/linux/platform_data/clk-ux500.h @@ -0,0 +1,17 @@ +/* + * Clock definitions for ux500 platforms + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __CLK_UX500_H +#define __CLK_UX500_H + +void u8500_clk_init(void); +void u9540_clk_init(void); +void u8540_clk_init(void); + +#endif /* __CLK_UX500_H */ -- cgit v1.2.3 From a093bde2b45a0a745f12c018e2d13c027d58641f Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Fri, 31 Aug 2012 14:21:28 +0200 Subject: clk: Provide option for clk_get_rate to issue hw for new rate By using CLK_GET_RATE_NOCACHE flag, we tell the clk_get_rate API to issue the hw for an updated clock rate. This can be used for a clock which rate may be updated without a client necessary modifying it. Signed-off-by: Ulf Hansson Signed-off-by: Mike Turquette --- drivers/clk/clk.c | 43 ++++++++++++++++++++++++------------------- include/linux/clk-provider.h | 1 + 2 files changed, 25 insertions(+), 19 deletions(-) (limited to 'include/linux') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index efdfd009c270..d9cbae06549f 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -557,25 +557,6 @@ int clk_enable(struct clk *clk) } EXPORT_SYMBOL_GPL(clk_enable); -/** - * clk_get_rate - return the rate of clk - * @clk: the clk whose rate is being returned - * - * Simply returns the cached rate of the clk. Does not query the hardware. If - * clk is NULL then returns 0. - */ -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long rate; - - mutex_lock(&prepare_lock); - rate = __clk_get_rate(clk); - mutex_unlock(&prepare_lock); - - return rate; -} -EXPORT_SYMBOL_GPL(clk_get_rate); - /** * __clk_round_rate - round the given rate for a clk * @clk: round the rate of this clock @@ -701,6 +682,30 @@ static void __clk_recalc_rates(struct clk *clk, unsigned long msg) __clk_recalc_rates(child, msg); } +/** + * clk_get_rate - return the rate of clk + * @clk: the clk whose rate is being returned + * + * Simply returns the cached rate of the clk, unless CLK_GET_RATE_NOCACHE flag + * is set, which means a recalc_rate will be issued. + * If clk is NULL then returns 0. + */ +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long rate; + + mutex_lock(&prepare_lock); + + if (clk && (clk->flags & CLK_GET_RATE_NOCACHE)) + __clk_recalc_rates(clk, 0); + + rate = __clk_get_rate(clk); + mutex_unlock(&prepare_lock); + + return rate; +} +EXPORT_SYMBOL_GPL(clk_get_rate); + /** * __clk_speculate_rates * @clk: first clk in the subtree diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 77335fac943e..1b15307cd466 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -26,6 +26,7 @@ #define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */ #define CLK_IS_ROOT BIT(4) /* root clk, has no parent */ #define CLK_IS_BASIC BIT(5) /* Basic clk, can't do a to_clk_foo() */ +#define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk rate */ struct clk_hw; -- cgit v1.2.3 From 20aee5b6d7738206bfd37b352a97c75627d6fa6d Mon Sep 17 00:00:00 2001 From: Michel Jaouen Date: Fri, 31 Aug 2012 14:21:30 +0200 Subject: mfd: dbx500: Provide a more accurate smp_twd clock The local timer clock is based on ARM subsystem clock. This patch obtains a more exact value of that clock by reading PRCMU registers. Using this increases the accuracy of the local timer events. Signed-off-by: Ulf Hansson Signed-off-by: Rickard Andersson Signed-off-by: Michel Jaouen Acked-by: Linus Walleij Signed-off-by: Mike Turquette --- drivers/mfd/db8500-prcmu.c | 42 ++++++++++++++++++++++++++++++++++++++++ drivers/mfd/dbx500-prcmu-regs.h | 4 +++- include/linux/mfd/dbx500-prcmu.h | 1 + 3 files changed, 46 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 7040a0081130..6b37e2d6ed8f 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -418,6 +418,9 @@ static struct { static atomic_t ac_wake_req_state = ATOMIC_INIT(0); +/* Functions definition */ +static void compute_armss_rate(void); + /* Spinlocks */ static DEFINE_SPINLOCK(prcmu_lock); static DEFINE_SPINLOCK(clkout_lock); @@ -517,6 +520,7 @@ static struct dsiescclk dsiescclk[3] = { } }; + /* * Used by MCDE to setup all necessary PRCMU registers */ @@ -1013,6 +1017,7 @@ int db8500_prcmu_set_arm_opp(u8 opp) (mb1_transfer.ack.arm_opp != opp)) r = -EIO; + compute_armss_rate(); mutex_unlock(&mb1_transfer.lock); return r; @@ -1612,6 +1617,7 @@ static unsigned long pll_rate(void __iomem *reg, unsigned long src_rate, if ((branch == PLL_FIX) || ((branch == PLL_DIV) && (val & PRCM_PLL_FREQ_DIV2EN) && ((reg == PRCM_PLLSOC0_FREQ) || + (reg == PRCM_PLLARM_FREQ) || (reg == PRCM_PLLDDR_FREQ)))) div *= 2; @@ -1661,6 +1667,39 @@ static unsigned long clock_rate(u8 clock) else return 0; } +static unsigned long latest_armss_rate; +static unsigned long armss_rate(void) +{ + return latest_armss_rate; +} + +static void compute_armss_rate(void) +{ + u32 r; + unsigned long rate; + + r = readl(PRCM_ARM_CHGCLKREQ); + + if (r & PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ) { + /* External ARMCLKFIX clock */ + + rate = pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_FIX); + + /* Check PRCM_ARM_CHGCLKREQ divider */ + if (!(r & PRCM_ARM_CHGCLKREQ_PRCM_ARM_DIVSEL)) + rate /= 2; + + /* Check PRCM_ARMCLKFIX_MGT divider */ + r = readl(PRCM_ARMCLKFIX_MGT); + r &= PRCM_CLK_MGT_CLKPLLDIV_MASK; + rate /= r; + + } else {/* ARM PLL */ + rate = pll_rate(PRCM_PLLARM_FREQ, ROOT_CLOCK_RATE, PLL_DIV); + } + + latest_armss_rate = rate; +} static unsigned long dsiclk_rate(u8 n) { @@ -1707,6 +1746,8 @@ unsigned long prcmu_clock_rate(u8 clock) return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, PLL_RAW); else if (clock == PRCMU_PLLSOC1) return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, PLL_RAW); + else if (clock == PRCMU_ARMSS) + return armss_rate(); else if (clock == PRCMU_PLLDDR) return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_RAW); else if (clock == PRCMU_PLLDSI) @@ -2693,6 +2734,7 @@ void __init db8500_prcmu_early_init(void) handle_simple_irq); set_irq_flags(irq, IRQF_VALID); } + compute_armss_rate(); } static void __init init_prcm_registers(void) diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h index 23108a6e3167..79c76ebdba52 100644 --- a/drivers/mfd/dbx500-prcmu-regs.h +++ b/drivers/mfd/dbx500-prcmu-regs.h @@ -61,7 +61,8 @@ #define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 0x2 #define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114) -#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ 0x1 +#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ BIT(0) +#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_DIVSEL BIT(16) #define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98) #define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE 0x1 @@ -140,6 +141,7 @@ /* PRCMU clock/PLL/reset registers */ #define PRCM_PLLSOC0_FREQ (_PRCMU_BASE + 0x080) #define PRCM_PLLSOC1_FREQ (_PRCMU_BASE + 0x084) +#define PRCM_PLLARM_FREQ (_PRCMU_BASE + 0x088) #define PRCM_PLLDDR_FREQ (_PRCMU_BASE + 0x08C) #define PRCM_PLL_FREQ_D_SHIFT 0 #define PRCM_PLL_FREQ_D_MASK BITS(0, 7) diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index 5b90e94399e1..c410d99bd667 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -136,6 +136,7 @@ enum prcmu_clock { PRCMU_TIMCLK, PRCMU_PLLSOC0, PRCMU_PLLSOC1, + PRCMU_ARMSS, PRCMU_PLLDDR, PRCMU_PLLDSI, PRCMU_DSI0CLK, -- cgit v1.2.3 From 494bfec99922d54054d2d0873f1017680cfc3f13 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 22 Aug 2012 21:36:27 +0800 Subject: clk: add of_clk_src_onecell_get() support For those SoCs that have hundreds of clock outputs, their clock DT bindings could reasonably define #clock-cells as 1 and require the client device specify the index of the clock it consumes in the cell of its "clocks" phandle. Add a generic of_clk_src_onecell_get() function for this purpose. Signed-off-by: Shawn Guo Reviewed-by: Rob Herring Signed-off-by: Mike Turquette --- drivers/clk/clk.c | 14 ++++++++++++++ include/linux/clk-provider.h | 5 +++++ 2 files changed, 19 insertions(+) (limited to 'include/linux') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index d9cbae06549f..56e4495ebeb1 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -1587,6 +1587,20 @@ struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec, } EXPORT_SYMBOL_GPL(of_clk_src_simple_get); +struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data) +{ + struct clk_onecell_data *clk_data = data; + unsigned int idx = clkspec->args[0]; + + if (idx >= clk_data->clk_num) { + pr_err("%s: invalid clock index %d\n", __func__, idx); + return ERR_PTR(-EINVAL); + } + + return clk_data->clks[idx]; +} +EXPORT_SYMBOL_GPL(of_clk_src_onecell_get); + /** * of_clk_add_provider() - Register a clock provider for a node * @np: Device node pointer associated with clock provider diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 1b15307cd466..c12731582920 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -361,6 +361,11 @@ int of_clk_add_provider(struct device_node *np, void of_clk_del_provider(struct device_node *np); struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec, void *data); +struct clk_onecell_data { + struct clk **clks; + unsigned int clk_num; +}; +struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data); const char *of_clk_get_parent_name(struct device_node *np, int index); void of_clk_init(const struct of_device_id *matches); -- cgit v1.2.3 From 7cdc39eeadf11824b62f65c22de60aca611b0744 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 24 Aug 2012 15:10:04 +0200 Subject: ARM: at91: move platform_data definitions Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the at91 include directories Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Acked-by: Greg Kroah-Hartman Acked-by: Nicolas Pitre Acked-by: Nicolas Ferre Acked-by: Vinod Koul Cc: Jean-Christophe Plagniol-Villard Cc: Dan Williams --- arch/arm/mach-at91/at91sam9g45_devices.c | 2 +- arch/arm/mach-at91/at91sam9rl_devices.c | 2 +- arch/arm/mach-at91/include/mach/at_hdmac.h | 61 ----------------------------- arch/arm/mach-at91/include/mach/atmel-mci.h | 2 +- drivers/dma/at_hdmac_regs.h | 2 +- include/linux/platform_data/atmel-aes.h | 2 +- include/linux/platform_data/dma-atmel.h | 61 +++++++++++++++++++++++++++++ 7 files changed, 66 insertions(+), 66 deletions(-) delete mode 100644 arch/arm/mach-at91/include/mach/at_hdmac.h create mode 100644 include/linux/platform_data/dma-atmel.h (limited to 'include/linux') diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 06073996a382..0aa9bdb75576 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -31,7 +31,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index f09fff932172..e4da7179e545 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include "generic.h" diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h deleted file mode 100644 index cab0997be3de..000000000000 --- a/arch/arm/mach-at91/include/mach/at_hdmac.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Header file for the Atmel AHB DMA Controller driver - * - * Copyright (C) 2008 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef AT_HDMAC_H -#define AT_HDMAC_H - -#include - -/** - * struct at_dma_platform_data - Controller configuration parameters - * @nr_channels: Number of channels supported by hardware (max 8) - * @cap_mask: dma_capability flags supported by the platform - */ -struct at_dma_platform_data { - unsigned int nr_channels; - dma_cap_mask_t cap_mask; -}; - -/** - * struct at_dma_slave - Controller-specific information about a slave - * @dma_dev: required DMA master device - * @cfg: Platform-specific initializer for the CFG register - */ -struct at_dma_slave { - struct device *dma_dev; - u32 cfg; -}; - - -/* Platform-configurable bits in CFG */ -#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */ -#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */ -#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */ -#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */ -#define ATC_SRC_H2SEL_SW (0x0 << 9) -#define ATC_SRC_H2SEL_HW (0x1 << 9) -#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */ -#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */ -#define ATC_DST_H2SEL_SW (0x0 << 13) -#define ATC_DST_H2SEL_HW (0x1 << 13) -#define ATC_SOD (0x1 << 16) /* Stop On Done */ -#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */ -#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */ -#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */ -#define ATC_LOCK_IF_L_CHUNK (0x0 << 22) -#define ATC_LOCK_IF_L_BUFFER (0x1 << 22) -#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */ -#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */ -#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28) -#define ATC_FIFOCFG_HALFFIFO (0x1 << 28) -#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28) - - -#endif /* AT_HDMAC_H */ diff --git a/arch/arm/mach-at91/include/mach/atmel-mci.h b/arch/arm/mach-at91/include/mach/atmel-mci.h index 998cb0c07135..cd580a12e904 100644 --- a/arch/arm/mach-at91/include/mach/atmel-mci.h +++ b/arch/arm/mach-at91/include/mach/atmel-mci.h @@ -1,7 +1,7 @@ #ifndef __MACH_ATMEL_MCI_H #define __MACH_ATMEL_MCI_H -#include +#include /** * struct mci_dma_data - DMA data for MCI interface diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h index 8a6c8e8b2940..116e4adffb08 100644 --- a/drivers/dma/at_hdmac_regs.h +++ b/drivers/dma/at_hdmac_regs.h @@ -11,7 +11,7 @@ #ifndef AT_HDMAC_REGS_H #define AT_HDMAC_REGS_H -#include +#include #define AT_DMA_MAX_NR_CHANNELS 8 diff --git a/include/linux/platform_data/atmel-aes.h b/include/linux/platform_data/atmel-aes.h index e7a1949bad26..ab68082fbcb0 100644 --- a/include/linux/platform_data/atmel-aes.h +++ b/include/linux/platform_data/atmel-aes.h @@ -1,7 +1,7 @@ #ifndef __LINUX_ATMEL_AES_H #define __LINUX_ATMEL_AES_H -#include +#include /** * struct aes_dma_data - DMA data for AES diff --git a/include/linux/platform_data/dma-atmel.h b/include/linux/platform_data/dma-atmel.h new file mode 100644 index 000000000000..cab0997be3de --- /dev/null +++ b/include/linux/platform_data/dma-atmel.h @@ -0,0 +1,61 @@ +/* + * Header file for the Atmel AHB DMA Controller driver + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef AT_HDMAC_H +#define AT_HDMAC_H + +#include + +/** + * struct at_dma_platform_data - Controller configuration parameters + * @nr_channels: Number of channels supported by hardware (max 8) + * @cap_mask: dma_capability flags supported by the platform + */ +struct at_dma_platform_data { + unsigned int nr_channels; + dma_cap_mask_t cap_mask; +}; + +/** + * struct at_dma_slave - Controller-specific information about a slave + * @dma_dev: required DMA master device + * @cfg: Platform-specific initializer for the CFG register + */ +struct at_dma_slave { + struct device *dma_dev; + u32 cfg; +}; + + +/* Platform-configurable bits in CFG */ +#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */ +#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */ +#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */ +#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */ +#define ATC_SRC_H2SEL_SW (0x0 << 9) +#define ATC_SRC_H2SEL_HW (0x1 << 9) +#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */ +#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */ +#define ATC_DST_H2SEL_SW (0x0 << 13) +#define ATC_DST_H2SEL_HW (0x1 << 13) +#define ATC_SOD (0x1 << 16) /* Stop On Done */ +#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */ +#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */ +#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */ +#define ATC_LOCK_IF_L_CHUNK (0x0 << 22) +#define ATC_LOCK_IF_L_BUFFER (0x1 << 22) +#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */ +#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */ +#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28) +#define ATC_FIFOCFG_HALFFIFO (0x1 << 28) +#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28) + + +#endif /* AT_HDMAC_H */ -- cgit v1.2.3 From ec2a0833e5157fab6cac5f57a49b2f31eb418a39 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 24 Aug 2012 15:11:34 +0200 Subject: ARM: davinci: move platform_data definitions Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the davinci include directories Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Acked-by: Greg Kroah-Hartman Acked-by: Nicolas Pitre Acked-by: Mauro Carvalho Chehab Acked-by: Felipe Balbi Cc: Sekhar Nori Cc: Kevin Hilman Cc: "Ben Dooks" Cc: "Wolfram Sang" Cc: Dmitry Torokhov Cc: Chris Ball Cc: David Woodhouse Cc: Grant Likely Cc: Alan Stern Cc: Liam Girdwood Cc: davinci-linux-open-source@linux.davincidsp.com --- arch/arm/mach-davinci/aemif.c | 2 +- arch/arm/mach-davinci/board-da830-evm.c | 8 +-- arch/arm/mach-davinci/board-da850-evm.c | 6 +- arch/arm/mach-davinci/board-dm355-evm.c | 8 +-- arch/arm/mach-davinci/board-dm355-leopard.c | 8 +-- arch/arm/mach-davinci/board-dm365-evm.c | 8 +-- arch/arm/mach-davinci/board-dm644x-evm.c | 10 +-- arch/arm/mach-davinci/board-dm646x-evm.c | 6 +- arch/arm/mach-davinci/board-mityomapl138.c | 4 +- arch/arm/mach-davinci/board-neuros-osd2.c | 8 +-- arch/arm/mach-davinci/board-sffsdr.c | 4 +- arch/arm/mach-davinci/davinci.h | 2 +- arch/arm/mach-davinci/devices.c | 4 +- arch/arm/mach-davinci/dm355.c | 2 +- arch/arm/mach-davinci/dm365.c | 4 +- arch/arm/mach-davinci/include/mach/aemif.h | 36 ---------- arch/arm/mach-davinci/include/mach/da8xx.h | 8 +-- arch/arm/mach-davinci/include/mach/i2c.h | 26 ------- arch/arm/mach-davinci/include/mach/keyscan.h | 42 ------------ arch/arm/mach-davinci/include/mach/mmc.h | 39 ----------- arch/arm/mach-davinci/include/mach/nand.h | 90 ------------------------- arch/arm/mach-davinci/include/mach/spi.h | 89 ------------------------ arch/arm/mach-davinci/include/mach/tnetv107x.h | 4 +- arch/arm/mach-davinci/include/mach/usb.h | 59 ---------------- arch/arm/mach-davinci/usb.c | 2 +- drivers/i2c/busses/i2c-davinci.c | 2 +- drivers/input/keyboard/davinci_keyscan.c | 2 +- drivers/media/video/davinci/vpbe_venc.c | 2 +- drivers/mmc/host/davinci_mmc.c | 2 +- drivers/mtd/nand/davinci_nand.c | 4 +- drivers/spi/spi-davinci.c | 2 +- drivers/usb/host/ohci-da8xx.c | 2 +- drivers/usb/musb/da8xx.c | 2 +- include/linux/platform_data/i2c-davinci.h | 26 +++++++ include/linux/platform_data/keyscan-davinci.h | 42 ++++++++++++ include/linux/platform_data/mmc-davinci.h | 39 +++++++++++ include/linux/platform_data/mtd-davinci-aemif.h | 36 ++++++++++ include/linux/platform_data/mtd-davinci.h | 90 +++++++++++++++++++++++++ include/linux/platform_data/spi-davinci.h | 89 ++++++++++++++++++++++++ include/linux/platform_data/usb-davinci.h | 59 ++++++++++++++++ 40 files changed, 439 insertions(+), 439 deletions(-) delete mode 100644 arch/arm/mach-davinci/include/mach/aemif.h delete mode 100644 arch/arm/mach-davinci/include/mach/i2c.h delete mode 100644 arch/arm/mach-davinci/include/mach/keyscan.h delete mode 100644 arch/arm/mach-davinci/include/mach/mmc.h delete mode 100644 arch/arm/mach-davinci/include/mach/nand.h delete mode 100644 arch/arm/mach-davinci/include/mach/spi.h delete mode 100644 arch/arm/mach-davinci/include/mach/usb.h create mode 100644 include/linux/platform_data/i2c-davinci.h create mode 100644 include/linux/platform_data/keyscan-davinci.h create mode 100644 include/linux/platform_data/mmc-davinci.h create mode 100644 include/linux/platform_data/mtd-davinci-aemif.h create mode 100644 include/linux/platform_data/mtd-davinci.h create mode 100644 include/linux/platform_data/spi-davinci.h create mode 100644 include/linux/platform_data/usb-davinci.h (limited to 'include/linux') diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c index 1ce70a91f2e9..f091a9010c2f 100644 --- a/arch/arm/mach-davinci/aemif.c +++ b/arch/arm/mach-davinci/aemif.c @@ -15,7 +15,7 @@ #include #include -#include +#include /* Timing value configuration */ diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 0031864e7f11..95b5e102ceb1 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -28,11 +28,11 @@ #include #include -#include +#include #include -#include -#include -#include +#include +#include +#include #define DA830_EVM_PHY_ID "" /* diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 0149fb453be3..1295e616ceee 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -40,10 +40,10 @@ #include #include -#include +#include #include -#include -#include +#include +#include #define DA850_EVM_PHY_ID "davinci_mdio-0:00" #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 1c7b1f46a8f3..88ebea89abdf 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -26,11 +26,11 @@ #include #include -#include +#include #include -#include -#include -#include +#include +#include +#include #include "davinci.h" diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 8e7703213b08..2f88103c6459 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -23,11 +23,11 @@ #include #include -#include +#include #include -#include -#include -#include +#include +#include +#include #include "davinci.h" diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 688a9c556dc9..1b4a8adcfdc9 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -33,11 +33,11 @@ #include #include -#include +#include #include -#include -#include -#include +#include +#include +#include #include diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index d34ed55912b2..ca72fc4b8cca 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -31,13 +31,13 @@ #include #include -#include +#include #include #include -#include -#include -#include -#include +#include +#include +#include +#include #include "davinci.h" diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 958679a20e13..9944367b4931 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -38,11 +38,11 @@ #include #include -#include -#include +#include +#include #include #include -#include +#include #include "davinci.h" #include "clock.h" diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index beecde3a1d2f..43e4a0d663fa 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -26,9 +26,9 @@ #include #include #include -#include +#include #include -#include +#include #define MITYOMAPL138_PHY_ID "" diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index f6b9fc70161b..144bf31d68dd 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -31,12 +31,12 @@ #include #include -#include +#include #include #include -#include -#include -#include +#include +#include +#include #include "davinci.h" diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 9078acf94bac..6957787fa7f3 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -36,10 +36,10 @@ #include #include -#include +#include #include #include -#include +#include #include "davinci.h" diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index 8db0fc6809dd..a37fc44e29bc 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -24,7 +24,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index d2f9666284a7..3a42b6f79aa9 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -15,12 +15,12 @@ #include #include -#include +#include #include #include #include #include -#include +#include #include #include "davinci.h" diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 678cd99b7336..adbde33eca01 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #include #include "davinci.h" diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index a50d49de1883..719e22f2a37e 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -30,8 +30,8 @@ #include #include #include -#include -#include +#include +#include #include #include "davinci.h" diff --git a/arch/arm/mach-davinci/include/mach/aemif.h b/arch/arm/mach-davinci/include/mach/aemif.h deleted file mode 100644 index 05b293443097..000000000000 --- a/arch/arm/mach-davinci/include/mach/aemif.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * TI DaVinci AEMIF support - * - * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ -#ifndef _MACH_DAVINCI_AEMIF_H -#define _MACH_DAVINCI_AEMIF_H - -#define NRCSR_OFFSET 0x00 -#define AWCCR_OFFSET 0x04 -#define A1CR_OFFSET 0x10 - -#define ACR_ASIZE_MASK 0x3 -#define ACR_EW_MASK BIT(30) -#define ACR_SS_MASK BIT(31) - -/* All timings in nanoseconds */ -struct davinci_aemif_timing { - u8 wsetup; - u8 wstrobe; - u8 whold; - - u8 rsetup; - u8 rstrobe; - u8 rhold; - - u8 ta; -}; - -int davinci_aemif_setup_timing(struct davinci_aemif_timing *t, - void __iomem *base, unsigned cs); -#endif diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index a2f1f274f189..33e78ae2a254 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -19,12 +19,12 @@ #include #include -#include #include -#include -#include #include -#include +#include +#include +#include +#include extern void __iomem *da8xx_syscfg0_base; extern void __iomem *da8xx_syscfg1_base; diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h deleted file mode 100644 index 2312d197dfb7..000000000000 --- a/arch/arm/mach-davinci/include/mach/i2c.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * DaVinci I2C controller platform_device info - * - * Author: Vladimir Barinov, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. -*/ - -#ifndef __ASM_ARCH_I2C_H -#define __ASM_ARCH_I2C_H - -/* All frequencies are expressed in kHz */ -struct davinci_i2c_platform_data { - unsigned int bus_freq; /* standard bus frequency (kHz) */ - unsigned int bus_delay; /* post-transaction delay (usec) */ - unsigned int sda_pin; /* GPIO pin ID to use for SDA */ - unsigned int scl_pin; /* GPIO pin ID to use for SCL */ -}; - -/* for board setup code */ -void davinci_init_i2c(struct davinci_i2c_platform_data *); - -#endif /* __ASM_ARCH_I2C_H */ diff --git a/arch/arm/mach-davinci/include/mach/keyscan.h b/arch/arm/mach-davinci/include/mach/keyscan.h deleted file mode 100644 index 7a560e05bda8..000000000000 --- a/arch/arm/mach-davinci/include/mach/keyscan.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments, Inc - * - * Author: Miguel Aguilar - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef DAVINCI_KEYSCAN_H -#define DAVINCI_KEYSCAN_H - -#include - -enum davinci_matrix_types { - DAVINCI_KEYSCAN_MATRIX_4X4, - DAVINCI_KEYSCAN_MATRIX_5X3, -}; - -struct davinci_ks_platform_data { - int (*device_enable)(struct device *dev); - unsigned short *keymap; - u32 keymapsize; - u8 rep:1; - u8 strobe; - u8 interval; - u8 matrix_type; -}; - -#endif - diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h deleted file mode 100644 index 5ba6b22ce338..000000000000 --- a/arch/arm/mach-davinci/include/mach/mmc.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Board-specific MMC configuration - */ - -#ifndef _DAVINCI_MMC_H -#define _DAVINCI_MMC_H - -#include -#include - -struct davinci_mmc_config { - /* get_cd()/get_wp() may sleep */ - int (*get_cd)(int module); - int (*get_ro)(int module); - - void (*set_power)(int module, bool on); - - /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */ - u8 wires; - - u32 max_freq; - - /* any additional host capabilities: OR'd in to mmc->f_caps */ - u32 caps; - - /* Version of the MMC/SD controller */ - u8 version; - - /* Number of sg segments */ - u8 nr_sg; -}; -void davinci_setup_mmc(int module, struct davinci_mmc_config *config); - -enum { - MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */ - MMC_CTLR_VERSION_2, /* DA830 */ -}; - -#endif diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h deleted file mode 100644 index 1cf555aef896..000000000000 --- a/arch/arm/mach-davinci/include/mach/nand.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * mach-davinci/nand.h - * - * Copyright © 2006 Texas Instruments. - * - * Ported to 2.6.23 Copyright © 2008 by - * Sander Huijsen - * Troy Kisky - * Dirk Behme - * - * -------------------------------------------------------------------------- - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_DAVINCI_NAND_H -#define __ARCH_ARM_DAVINCI_NAND_H - -#include - -#define NANDFCR_OFFSET 0x60 -#define NANDFSR_OFFSET 0x64 -#define NANDF1ECC_OFFSET 0x70 - -/* 4-bit ECC syndrome registers */ -#define NAND_4BIT_ECC_LOAD_OFFSET 0xbc -#define NAND_4BIT_ECC1_OFFSET 0xc0 -#define NAND_4BIT_ECC2_OFFSET 0xc4 -#define NAND_4BIT_ECC3_OFFSET 0xc8 -#define NAND_4BIT_ECC4_OFFSET 0xcc -#define NAND_ERR_ADD1_OFFSET 0xd0 -#define NAND_ERR_ADD2_OFFSET 0xd4 -#define NAND_ERR_ERRVAL1_OFFSET 0xd8 -#define NAND_ERR_ERRVAL2_OFFSET 0xdc - -/* NOTE: boards don't need to use these address bits - * for ALE/CLE unless they support booting from NAND. - * They're used unless platform data overrides them. - */ -#define MASK_ALE 0x08 -#define MASK_CLE 0x10 - -struct davinci_nand_pdata { /* platform_data */ - uint32_t mask_ale; - uint32_t mask_cle; - - /* for packages using two chipselects */ - uint32_t mask_chipsel; - - /* board's default static partition info */ - struct mtd_partition *parts; - unsigned nr_parts; - - /* none == NAND_ECC_NONE (strongly *not* advised!!) - * soft == NAND_ECC_SOFT - * else == NAND_ECC_HW, according to ecc_bits - * - * All DaVinci-family chips support 1-bit hardware ECC. - * Newer ones also support 4-bit ECC, but are awkward - * using it with large page chips. - */ - nand_ecc_modes_t ecc_mode; - u8 ecc_bits; - - /* e.g. NAND_BUSWIDTH_16 */ - unsigned options; - /* e.g. NAND_BBT_USE_FLASH */ - unsigned bbt_options; - - /* Main and mirror bbt descriptor overrides */ - struct nand_bbt_descr *bbt_td; - struct nand_bbt_descr *bbt_md; - - /* Access timings */ - struct davinci_aemif_timing *timing; -}; - -#endif /* __ARCH_ARM_DAVINCI_NAND_H */ diff --git a/arch/arm/mach-davinci/include/mach/spi.h b/arch/arm/mach-davinci/include/mach/spi.h deleted file mode 100644 index 7af305b37868..000000000000 --- a/arch/arm/mach-davinci/include/mach/spi.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright 2009 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_DAVINCI_SPI_H -#define __ARCH_ARM_DAVINCI_SPI_H - -#include - -#define SPI_INTERN_CS 0xFF - -enum { - SPI_VERSION_1, /* For DM355/DM365/DM6467 */ - SPI_VERSION_2, /* For DA8xx */ -}; - -/** - * davinci_spi_platform_data - Platform data for SPI master device on DaVinci - * - * @version: version of the SPI IP. Different DaVinci devices have slightly - * varying versions of the same IP. - * @num_chipselect: number of chipselects supported by this SPI master - * @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt - * controller withn the SoC. Possible values are 0 and 1. - * @chip_sel: list of GPIOs which can act as chip-selects for the SPI. - * SPI_INTERN_CS denotes internal SPI chip-select. Not necessary - * to populate if all chip-selects are internal. - * @cshold_bug: set this to true if the SPI controller on your chip requires - * a write to CSHOLD bit in between transfers (like in DM355). - * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any - * device on the bus. - */ -struct davinci_spi_platform_data { - u8 version; - u8 num_chipselect; - u8 intr_line; - u8 *chip_sel; - bool cshold_bug; - enum dma_event_q dma_event_q; -}; - -/** - * davinci_spi_config - Per-chip-select configuration for SPI slave devices - * - * @wdelay: amount of delay between transmissions. Measured in number of - * SPI module clocks. - * @odd_parity: polarity of parity flag at the end of transmit data stream. - * 0 - odd parity, 1 - even parity. - * @parity_enable: enable transmission of parity at end of each transmit - * data stream. - * @io_type: type of IO transfer. Choose between polled, interrupt and DMA. - * @timer_disable: disable chip-select timers (setup and hold) - * @c2tdelay: chip-select setup time. Measured in number of SPI module clocks. - * @t2cdelay: chip-select hold time. Measured in number of SPI module clocks. - * @t2edelay: transmit data finished to SPI ENAn pin inactive time. Measured - * in number of SPI clocks. - * @c2edelay: chip-select active to SPI ENAn signal active time. Measured in - * number of SPI clocks. - */ -struct davinci_spi_config { - u8 wdelay; - u8 odd_parity; - u8 parity_enable; -#define SPI_IO_TYPE_INTR 0 -#define SPI_IO_TYPE_POLL 1 -#define SPI_IO_TYPE_DMA 2 - u8 io_type; - u8 timer_disable; - u8 c2tdelay; - u8 t2cdelay; - u8 t2edelay; - u8 c2edelay; -}; - -#endif /* __ARCH_ARM_DAVINCI_SPI_H */ diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h index 83e5926f3c46..1656a02e3eda 100644 --- a/arch/arm/mach-davinci/include/mach/tnetv107x.h +++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h @@ -36,8 +36,8 @@ #include #include -#include -#include +#include +#include #include struct tnetv107x_device_info { diff --git a/arch/arm/mach-davinci/include/mach/usb.h b/arch/arm/mach-davinci/include/mach/usb.h deleted file mode 100644 index e0bc4abe69c2..000000000000 --- a/arch/arm/mach-davinci/include/mach/usb.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * USB related definitions - * - * Copyright (C) 2009 MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_USB_H -#define __ASM_ARCH_USB_H - -/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */ -#define CFGCHIP2_PHYCLKGD (1 << 17) -#define CFGCHIP2_VBUSSENSE (1 << 16) -#define CFGCHIP2_RESET (1 << 15) -#define CFGCHIP2_OTGMODE (3 << 13) -#define CFGCHIP2_NO_OVERRIDE (0 << 13) -#define CFGCHIP2_FORCE_HOST (1 << 13) -#define CFGCHIP2_FORCE_DEVICE (2 << 13) -#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13) -#define CFGCHIP2_USB1PHYCLKMUX (1 << 12) -#define CFGCHIP2_USB2PHYCLKMUX (1 << 11) -#define CFGCHIP2_PHYPWRDN (1 << 10) -#define CFGCHIP2_OTGPWRDN (1 << 9) -#define CFGCHIP2_DATPOL (1 << 8) -#define CFGCHIP2_USB1SUSPENDM (1 << 7) -#define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */ -#define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */ -#define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */ -#define CFGCHIP2_REFFREQ (0xf << 0) -#define CFGCHIP2_REFFREQ_12MHZ (1 << 0) -#define CFGCHIP2_REFFREQ_24MHZ (2 << 0) -#define CFGCHIP2_REFFREQ_48MHZ (3 << 0) - -struct da8xx_ohci_root_hub; - -typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub, - unsigned port); - -/* Passed as the platform data to the OHCI driver */ -struct da8xx_ohci_root_hub { - /* Switch the port power on/off */ - int (*set_power)(unsigned port, int on); - /* Read the port power status */ - int (*get_power)(unsigned port); - /* Read the port over-current indicator */ - int (*get_oci)(unsigned port); - /* Over-current indicator change notification (pass NULL to disable) */ - int (*ocic_notify)(da8xx_ocic_handler_t handler); - - /* Time from power on to power good (in 2 ms units) */ - u8 potpgt; -}; - -void davinci_setup_usb(unsigned mA, unsigned potpgt_ms); - -#endif /* ifndef __ASM_ARCH_USB_H */ diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 23d2b6d9fa63..f77b95336e2b 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include #define DAVINCI_USB_OTG_BASE 0x01c64000 diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 79b4bcb3b85c..79a2542d8c41 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -40,7 +40,7 @@ #include #include -#include +#include /* ----- global defines ----------------------------------------------- */ diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c index 9d82b3aeff5e..d5bacbb479b0 100644 --- a/drivers/input/keyboard/davinci_keyscan.c +++ b/drivers/input/keyboard/davinci_keyscan.c @@ -36,7 +36,7 @@ #include #include -#include +#include /* Key scan registers */ #define DAVINCI_KEYSCAN_KEYCTRL 0x0000 diff --git a/drivers/media/video/davinci/vpbe_venc.c b/drivers/media/video/davinci/vpbe_venc.c index b21ecc8d134d..0302669622d6 100644 --- a/drivers/media/video/davinci/vpbe_venc.c +++ b/drivers/media/video/davinci/vpbe_venc.c @@ -27,7 +27,7 @@ #include #include -#include +#include #include diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c index 7cf6c624bf73..3dfd3473269d 100644 --- a/drivers/mmc/host/davinci_mmc.c +++ b/drivers/mmc/host/davinci_mmc.c @@ -33,7 +33,7 @@ #include #include -#include +#include #include /* diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index d94b03c207af..f1deb1ee2c95 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -34,8 +34,8 @@ #include #include -#include -#include +#include +#include /* * This is a device driver for the NAND flash controller found on the diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index 9b2901feaf78..3afe2f4f5b8e 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -30,7 +30,7 @@ #include #include -#include +#include #include #define SPI_NO_RESOURCE ((resource_size_t)-1) diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index 269b1e0f7691..0b815a856811 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -17,7 +17,7 @@ #include #include -#include +#include #ifndef CONFIG_ARCH_DAVINCI_DA8XX #error "This file is DA8xx bus glue. Define CONFIG_ARCH_DAVINCI_DA8XX." diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 0f9fcec4e1d3..15a262754150 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -35,7 +35,7 @@ #include #include -#include +#include #include "musb_core.h" diff --git a/include/linux/platform_data/i2c-davinci.h b/include/linux/platform_data/i2c-davinci.h new file mode 100644 index 000000000000..2312d197dfb7 --- /dev/null +++ b/include/linux/platform_data/i2c-davinci.h @@ -0,0 +1,26 @@ +/* + * DaVinci I2C controller platform_device info + * + * Author: Vladimir Barinov, MontaVista Software, Inc. + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. +*/ + +#ifndef __ASM_ARCH_I2C_H +#define __ASM_ARCH_I2C_H + +/* All frequencies are expressed in kHz */ +struct davinci_i2c_platform_data { + unsigned int bus_freq; /* standard bus frequency (kHz) */ + unsigned int bus_delay; /* post-transaction delay (usec) */ + unsigned int sda_pin; /* GPIO pin ID to use for SDA */ + unsigned int scl_pin; /* GPIO pin ID to use for SCL */ +}; + +/* for board setup code */ +void davinci_init_i2c(struct davinci_i2c_platform_data *); + +#endif /* __ASM_ARCH_I2C_H */ diff --git a/include/linux/platform_data/keyscan-davinci.h b/include/linux/platform_data/keyscan-davinci.h new file mode 100644 index 000000000000..7a560e05bda8 --- /dev/null +++ b/include/linux/platform_data/keyscan-davinci.h @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2009 Texas Instruments, Inc + * + * Author: Miguel Aguilar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef DAVINCI_KEYSCAN_H +#define DAVINCI_KEYSCAN_H + +#include + +enum davinci_matrix_types { + DAVINCI_KEYSCAN_MATRIX_4X4, + DAVINCI_KEYSCAN_MATRIX_5X3, +}; + +struct davinci_ks_platform_data { + int (*device_enable)(struct device *dev); + unsigned short *keymap; + u32 keymapsize; + u8 rep:1; + u8 strobe; + u8 interval; + u8 matrix_type; +}; + +#endif + diff --git a/include/linux/platform_data/mmc-davinci.h b/include/linux/platform_data/mmc-davinci.h new file mode 100644 index 000000000000..5ba6b22ce338 --- /dev/null +++ b/include/linux/platform_data/mmc-davinci.h @@ -0,0 +1,39 @@ +/* + * Board-specific MMC configuration + */ + +#ifndef _DAVINCI_MMC_H +#define _DAVINCI_MMC_H + +#include +#include + +struct davinci_mmc_config { + /* get_cd()/get_wp() may sleep */ + int (*get_cd)(int module); + int (*get_ro)(int module); + + void (*set_power)(int module, bool on); + + /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */ + u8 wires; + + u32 max_freq; + + /* any additional host capabilities: OR'd in to mmc->f_caps */ + u32 caps; + + /* Version of the MMC/SD controller */ + u8 version; + + /* Number of sg segments */ + u8 nr_sg; +}; +void davinci_setup_mmc(int module, struct davinci_mmc_config *config); + +enum { + MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */ + MMC_CTLR_VERSION_2, /* DA830 */ +}; + +#endif diff --git a/include/linux/platform_data/mtd-davinci-aemif.h b/include/linux/platform_data/mtd-davinci-aemif.h new file mode 100644 index 000000000000..05b293443097 --- /dev/null +++ b/include/linux/platform_data/mtd-davinci-aemif.h @@ -0,0 +1,36 @@ +/* + * TI DaVinci AEMIF support + * + * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef _MACH_DAVINCI_AEMIF_H +#define _MACH_DAVINCI_AEMIF_H + +#define NRCSR_OFFSET 0x00 +#define AWCCR_OFFSET 0x04 +#define A1CR_OFFSET 0x10 + +#define ACR_ASIZE_MASK 0x3 +#define ACR_EW_MASK BIT(30) +#define ACR_SS_MASK BIT(31) + +/* All timings in nanoseconds */ +struct davinci_aemif_timing { + u8 wsetup; + u8 wstrobe; + u8 whold; + + u8 rsetup; + u8 rstrobe; + u8 rhold; + + u8 ta; +}; + +int davinci_aemif_setup_timing(struct davinci_aemif_timing *t, + void __iomem *base, unsigned cs); +#endif diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h new file mode 100644 index 000000000000..1cf555aef896 --- /dev/null +++ b/include/linux/platform_data/mtd-davinci.h @@ -0,0 +1,90 @@ +/* + * mach-davinci/nand.h + * + * Copyright © 2006 Texas Instruments. + * + * Ported to 2.6.23 Copyright © 2008 by + * Sander Huijsen + * Troy Kisky + * Dirk Behme + * + * -------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ARCH_ARM_DAVINCI_NAND_H +#define __ARCH_ARM_DAVINCI_NAND_H + +#include + +#define NANDFCR_OFFSET 0x60 +#define NANDFSR_OFFSET 0x64 +#define NANDF1ECC_OFFSET 0x70 + +/* 4-bit ECC syndrome registers */ +#define NAND_4BIT_ECC_LOAD_OFFSET 0xbc +#define NAND_4BIT_ECC1_OFFSET 0xc0 +#define NAND_4BIT_ECC2_OFFSET 0xc4 +#define NAND_4BIT_ECC3_OFFSET 0xc8 +#define NAND_4BIT_ECC4_OFFSET 0xcc +#define NAND_ERR_ADD1_OFFSET 0xd0 +#define NAND_ERR_ADD2_OFFSET 0xd4 +#define NAND_ERR_ERRVAL1_OFFSET 0xd8 +#define NAND_ERR_ERRVAL2_OFFSET 0xdc + +/* NOTE: boards don't need to use these address bits + * for ALE/CLE unless they support booting from NAND. + * They're used unless platform data overrides them. + */ +#define MASK_ALE 0x08 +#define MASK_CLE 0x10 + +struct davinci_nand_pdata { /* platform_data */ + uint32_t mask_ale; + uint32_t mask_cle; + + /* for packages using two chipselects */ + uint32_t mask_chipsel; + + /* board's default static partition info */ + struct mtd_partition *parts; + unsigned nr_parts; + + /* none == NAND_ECC_NONE (strongly *not* advised!!) + * soft == NAND_ECC_SOFT + * else == NAND_ECC_HW, according to ecc_bits + * + * All DaVinci-family chips support 1-bit hardware ECC. + * Newer ones also support 4-bit ECC, but are awkward + * using it with large page chips. + */ + nand_ecc_modes_t ecc_mode; + u8 ecc_bits; + + /* e.g. NAND_BUSWIDTH_16 */ + unsigned options; + /* e.g. NAND_BBT_USE_FLASH */ + unsigned bbt_options; + + /* Main and mirror bbt descriptor overrides */ + struct nand_bbt_descr *bbt_td; + struct nand_bbt_descr *bbt_md; + + /* Access timings */ + struct davinci_aemif_timing *timing; +}; + +#endif /* __ARCH_ARM_DAVINCI_NAND_H */ diff --git a/include/linux/platform_data/spi-davinci.h b/include/linux/platform_data/spi-davinci.h new file mode 100644 index 000000000000..7af305b37868 --- /dev/null +++ b/include/linux/platform_data/spi-davinci.h @@ -0,0 +1,89 @@ +/* + * Copyright 2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ARCH_ARM_DAVINCI_SPI_H +#define __ARCH_ARM_DAVINCI_SPI_H + +#include + +#define SPI_INTERN_CS 0xFF + +enum { + SPI_VERSION_1, /* For DM355/DM365/DM6467 */ + SPI_VERSION_2, /* For DA8xx */ +}; + +/** + * davinci_spi_platform_data - Platform data for SPI master device on DaVinci + * + * @version: version of the SPI IP. Different DaVinci devices have slightly + * varying versions of the same IP. + * @num_chipselect: number of chipselects supported by this SPI master + * @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt + * controller withn the SoC. Possible values are 0 and 1. + * @chip_sel: list of GPIOs which can act as chip-selects for the SPI. + * SPI_INTERN_CS denotes internal SPI chip-select. Not necessary + * to populate if all chip-selects are internal. + * @cshold_bug: set this to true if the SPI controller on your chip requires + * a write to CSHOLD bit in between transfers (like in DM355). + * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any + * device on the bus. + */ +struct davinci_spi_platform_data { + u8 version; + u8 num_chipselect; + u8 intr_line; + u8 *chip_sel; + bool cshold_bug; + enum dma_event_q dma_event_q; +}; + +/** + * davinci_spi_config - Per-chip-select configuration for SPI slave devices + * + * @wdelay: amount of delay between transmissions. Measured in number of + * SPI module clocks. + * @odd_parity: polarity of parity flag at the end of transmit data stream. + * 0 - odd parity, 1 - even parity. + * @parity_enable: enable transmission of parity at end of each transmit + * data stream. + * @io_type: type of IO transfer. Choose between polled, interrupt and DMA. + * @timer_disable: disable chip-select timers (setup and hold) + * @c2tdelay: chip-select setup time. Measured in number of SPI module clocks. + * @t2cdelay: chip-select hold time. Measured in number of SPI module clocks. + * @t2edelay: transmit data finished to SPI ENAn pin inactive time. Measured + * in number of SPI clocks. + * @c2edelay: chip-select active to SPI ENAn signal active time. Measured in + * number of SPI clocks. + */ +struct davinci_spi_config { + u8 wdelay; + u8 odd_parity; + u8 parity_enable; +#define SPI_IO_TYPE_INTR 0 +#define SPI_IO_TYPE_POLL 1 +#define SPI_IO_TYPE_DMA 2 + u8 io_type; + u8 timer_disable; + u8 c2tdelay; + u8 t2cdelay; + u8 t2edelay; + u8 c2edelay; +}; + +#endif /* __ARCH_ARM_DAVINCI_SPI_H */ diff --git a/include/linux/platform_data/usb-davinci.h b/include/linux/platform_data/usb-davinci.h new file mode 100644 index 000000000000..e0bc4abe69c2 --- /dev/null +++ b/include/linux/platform_data/usb-davinci.h @@ -0,0 +1,59 @@ +/* + * USB related definitions + * + * Copyright (C) 2009 MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_USB_H +#define __ASM_ARCH_USB_H + +/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */ +#define CFGCHIP2_PHYCLKGD (1 << 17) +#define CFGCHIP2_VBUSSENSE (1 << 16) +#define CFGCHIP2_RESET (1 << 15) +#define CFGCHIP2_OTGMODE (3 << 13) +#define CFGCHIP2_NO_OVERRIDE (0 << 13) +#define CFGCHIP2_FORCE_HOST (1 << 13) +#define CFGCHIP2_FORCE_DEVICE (2 << 13) +#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13) +#define CFGCHIP2_USB1PHYCLKMUX (1 << 12) +#define CFGCHIP2_USB2PHYCLKMUX (1 << 11) +#define CFGCHIP2_PHYPWRDN (1 << 10) +#define CFGCHIP2_OTGPWRDN (1 << 9) +#define CFGCHIP2_DATPOL (1 << 8) +#define CFGCHIP2_USB1SUSPENDM (1 << 7) +#define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */ +#define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */ +#define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */ +#define CFGCHIP2_REFFREQ (0xf << 0) +#define CFGCHIP2_REFFREQ_12MHZ (1 << 0) +#define CFGCHIP2_REFFREQ_24MHZ (2 << 0) +#define CFGCHIP2_REFFREQ_48MHZ (3 << 0) + +struct da8xx_ohci_root_hub; + +typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub, + unsigned port); + +/* Passed as the platform data to the OHCI driver */ +struct da8xx_ohci_root_hub { + /* Switch the port power on/off */ + int (*set_power)(unsigned port, int on); + /* Read the port power status */ + int (*get_power)(unsigned port); + /* Read the port over-current indicator */ + int (*get_oci)(unsigned port); + /* Over-current indicator change notification (pass NULL to disable) */ + int (*ocic_notify)(da8xx_ocic_handler_t handler); + + /* Time from power on to power good (in 2 ms units) */ + u8 potpgt; +}; + +void davinci_setup_usb(unsigned mA, unsigned potpgt_ms); + +#endif /* ifndef __ASM_ARCH_USB_H */ -- cgit v1.2.3 From a3b2924547a79cb6dba683d737501c01476f9fb3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 24 Aug 2012 15:12:11 +0200 Subject: ARM: ep93xx: move platform_data definitions Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the ep93xx include directories Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Acked-by: Greg Kroah-Hartman Acked-by: Nicolas Pitre Acked-by: Hartley Sweeten Acked-by: Ryan Mallon Acked-by: Vinod Koul Cc: Grant Likely Cc: Jeff Garzik Cc: Dan Williams Cc: Dmitry Torokhov Cc: Florian Tobias Schandinat Cc: Liam Girdwood Cc: Jaroslav Kysela Cc: Takashi Iwai Cc: Mika Westerberg Cc: Axel Lin --- Documentation/spi/ep93xx_spi | 2 +- arch/arm/mach-ep93xx/core.c | 6 +- arch/arm/mach-ep93xx/dma.c | 2 +- arch/arm/mach-ep93xx/edb93xx.c | 4 +- arch/arm/mach-ep93xx/include/mach/dma.h | 93 ----------------------- arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h | 35 --------- arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h | 29 ------- arch/arm/mach-ep93xx/include/mach/fb.h | 56 -------------- arch/arm/mach-ep93xx/simone.c | 2 +- arch/arm/mach-ep93xx/snappercl15.c | 2 +- arch/arm/mach-ep93xx/vision_ep9307.c | 4 +- drivers/ata/pata_ep93xx.c | 2 +- drivers/dma/ep93xx_dma.c | 2 +- drivers/input/keyboard/ep93xx_keypad.c | 2 +- drivers/spi/spi-ep93xx.c | 4 +- drivers/video/ep93xx-fb.c | 2 +- include/linux/platform_data/dma-ep93xx.h | 93 +++++++++++++++++++++++ include/linux/platform_data/keypad-ep93xx.h | 35 +++++++++ include/linux/platform_data/spi-ep93xx.h | 29 +++++++ include/linux/platform_data/video-ep93xx.h | 56 ++++++++++++++ sound/soc/ep93xx/ep93xx-ac97.c | 2 +- sound/soc/ep93xx/ep93xx-i2s.c | 2 +- sound/soc/ep93xx/ep93xx-pcm.c | 2 +- 23 files changed, 233 insertions(+), 233 deletions(-) delete mode 100644 arch/arm/mach-ep93xx/include/mach/dma.h delete mode 100644 arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h delete mode 100644 arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h delete mode 100644 arch/arm/mach-ep93xx/include/mach/fb.h create mode 100644 include/linux/platform_data/dma-ep93xx.h create mode 100644 include/linux/platform_data/keypad-ep93xx.h create mode 100644 include/linux/platform_data/spi-ep93xx.h create mode 100644 include/linux/platform_data/video-ep93xx.h (limited to 'include/linux') diff --git a/Documentation/spi/ep93xx_spi b/Documentation/spi/ep93xx_spi index d8eb01c15db1..832ddce6e5fb 100644 --- a/Documentation/spi/ep93xx_spi +++ b/Documentation/spi/ep93xx_spi @@ -26,7 +26,7 @@ arch/arm/mach-ep93xx/ts72xx.c: #include #include -#include +#include /* this is our GPIO line used for chip select */ #define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO9 diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 4afe52aaaff3..e85bf17f2d2a 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -36,9 +36,9 @@ #include #include -#include -#include -#include +#include +#include +#include #include #include diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c index 16976d7bdc8a..d8bfd02f5047 100644 --- a/arch/arm/mach-ep93xx/dma.c +++ b/arch/arm/mach-ep93xx/dma.c @@ -25,7 +25,7 @@ #include #include -#include +#include #include #include "soc.h" diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 337ab7cf4c16..b8f53d57a299 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -35,8 +35,8 @@ #include #include -#include -#include +#include +#include #include #include diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h deleted file mode 100644 index e82c642fa53c..000000000000 --- a/arch/arm/mach-ep93xx/include/mach/dma.h +++ /dev/null @@ -1,93 +0,0 @@ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include -#include -#include - -/* - * M2P channels. - * - * Note that these values are also directly used for setting the PPALLOC - * register. - */ -#define EP93XX_DMA_I2S1 0 -#define EP93XX_DMA_I2S2 1 -#define EP93XX_DMA_AAC1 2 -#define EP93XX_DMA_AAC2 3 -#define EP93XX_DMA_AAC3 4 -#define EP93XX_DMA_I2S3 5 -#define EP93XX_DMA_UART1 6 -#define EP93XX_DMA_UART2 7 -#define EP93XX_DMA_UART3 8 -#define EP93XX_DMA_IRDA 9 -/* M2M channels */ -#define EP93XX_DMA_SSP 10 -#define EP93XX_DMA_IDE 11 - -/** - * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine - * @port: peripheral which is requesting the channel - * @direction: TX/RX channel - * @name: optional name for the channel, this is displayed in /proc/interrupts - * - * This information is passed as private channel parameter in a filter - * function. Note that this is only needed for slave/cyclic channels. For - * memcpy channels %NULL data should be passed. - */ -struct ep93xx_dma_data { - int port; - enum dma_transfer_direction direction; - const char *name; -}; - -/** - * struct ep93xx_dma_chan_data - platform specific data for a DMA channel - * @name: name of the channel, used for getting the right clock for the channel - * @base: mapped registers - * @irq: interrupt number used by this channel - */ -struct ep93xx_dma_chan_data { - const char *name; - void __iomem *base; - int irq; -}; - -/** - * struct ep93xx_dma_platform_data - platform data for the dmaengine driver - * @channels: array of channels which are passed to the driver - * @num_channels: number of channels in the array - * - * This structure is passed to the DMA engine driver via platform data. For - * M2P channels, contract is that even channels are for TX and odd for RX. - * There is no requirement for the M2M channels. - */ -struct ep93xx_dma_platform_data { - struct ep93xx_dma_chan_data *channels; - size_t num_channels; -}; - -static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) -{ - return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p"); -} - -/** - * ep93xx_dma_chan_direction - returns direction the channel can be used - * @chan: channel - * - * This function can be used in filter functions to find out whether the - * channel supports given DMA direction. Only M2P channels have such - * limitation, for M2M channels the direction is configurable. - */ -static inline enum dma_transfer_direction -ep93xx_dma_chan_direction(struct dma_chan *chan) -{ - if (!ep93xx_dma_chan_is_m2p(chan)) - return DMA_NONE; - - /* even channels are for TX, odd for RX */ - return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; -} - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h deleted file mode 100644 index 1e2f4e97f428..000000000000 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h - */ - -#ifndef __ASM_ARCH_EP93XX_KEYPAD_H -#define __ASM_ARCH_EP93XX_KEYPAD_H - -struct matrix_keymap_data; - -/* flags for the ep93xx_keypad driver */ -#define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */ -#define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */ -#define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */ -#define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */ -#define EP93XX_KEYPAD_KDIV (1<<4) /* 1/4 clock or 1/16 clock */ -#define EP93XX_KEYPAD_AUTOREPEAT (1<<5) /* enable key autorepeat */ - -/** - * struct ep93xx_keypad_platform_data - platform specific device structure - * @keymap_data: pointer to &matrix_keymap_data - * @debounce: debounce start count; terminal count is 0xff - * @prescale: row/column counter pre-scaler load value - * @flags: see above - */ -struct ep93xx_keypad_platform_data { - struct matrix_keymap_data *keymap_data; - unsigned int debounce; - unsigned int prescale; - unsigned int flags; -}; - -#define EP93XX_MATRIX_ROWS (8) -#define EP93XX_MATRIX_COLS (8) - -#endif /* __ASM_ARCH_EP93XX_KEYPAD_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h deleted file mode 100644 index 9bb63ac13f04..000000000000 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __ASM_MACH_EP93XX_SPI_H -#define __ASM_MACH_EP93XX_SPI_H - -struct spi_device; - -/** - * struct ep93xx_spi_info - EP93xx specific SPI descriptor - * @num_chipselect: number of chip selects on this board, must be - * at least one - * @use_dma: use DMA for the transfers - */ -struct ep93xx_spi_info { - int num_chipselect; - bool use_dma; -}; - -/** - * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device - * @setup: setup the chip select mechanism - * @cleanup: cleanup the chip select mechanism - * @cs_control: control the device chip select - */ -struct ep93xx_spi_chip_ops { - int (*setup)(struct spi_device *spi); - void (*cleanup)(struct spi_device *spi); - void (*cs_control)(struct spi_device *spi, int value); -}; - -#endif /* __ASM_MACH_EP93XX_SPI_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/fb.h b/arch/arm/mach-ep93xx/include/mach/fb.h deleted file mode 100644 index d5ae11d7c453..000000000000 --- a/arch/arm/mach-ep93xx/include/mach/fb.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/fb.h - */ - -#ifndef __ASM_ARCH_EP93XXFB_H -#define __ASM_ARCH_EP93XXFB_H - -struct platform_device; -struct fb_videomode; -struct fb_info; - -#define EP93XXFB_USE_MODEDB 0 - -/* VideoAttributes flags */ -#define EP93XXFB_STATE_MACHINE_ENABLE (1 << 0) -#define EP93XXFB_PIXEL_CLOCK_ENABLE (1 << 1) -#define EP93XXFB_VSYNC_ENABLE (1 << 2) -#define EP93XXFB_PIXEL_DATA_ENABLE (1 << 3) -#define EP93XXFB_COMPOSITE_SYNC (1 << 4) -#define EP93XXFB_SYNC_VERT_HIGH (1 << 5) -#define EP93XXFB_SYNC_HORIZ_HIGH (1 << 6) -#define EP93XXFB_SYNC_BLANK_HIGH (1 << 7) -#define EP93XXFB_PCLK_FALLING (1 << 8) -#define EP93XXFB_ENABLE_AC (1 << 9) -#define EP93XXFB_ENABLE_LCD (1 << 10) -#define EP93XXFB_ENABLE_CCIR (1 << 12) -#define EP93XXFB_USE_PARALLEL_INTERFACE (1 << 13) -#define EP93XXFB_ENABLE_INTERRUPT (1 << 14) -#define EP93XXFB_USB_INTERLACE (1 << 16) -#define EP93XXFB_USE_EQUALIZATION (1 << 17) -#define EP93XXFB_USE_DOUBLE_HORZ (1 << 18) -#define EP93XXFB_USE_DOUBLE_VERT (1 << 19) -#define EP93XXFB_USE_BLANK_PIXEL (1 << 20) -#define EP93XXFB_USE_SDCSN0 (0 << 21) -#define EP93XXFB_USE_SDCSN1 (1 << 21) -#define EP93XXFB_USE_SDCSN2 (2 << 21) -#define EP93XXFB_USE_SDCSN3 (3 << 21) - -#define EP93XXFB_ENABLE (EP93XXFB_STATE_MACHINE_ENABLE | \ - EP93XXFB_PIXEL_CLOCK_ENABLE | \ - EP93XXFB_VSYNC_ENABLE | \ - EP93XXFB_PIXEL_DATA_ENABLE) - -struct ep93xxfb_mach_info { - unsigned int num_modes; - const struct fb_videomode *modes; - const struct fb_videomode *default_mode; - int bpp; - unsigned int flags; - - int (*setup)(struct platform_device *pdev); - void (*teardown)(struct platform_device *pdev); - void (*blank)(int blank_mode, struct fb_info *info); -}; - -#endif /* __ASM_ARCH_EP93XXFB_H */ diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index 33dc07917417..0eb3f17a6fa2 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -22,7 +22,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index 01abd3516a77..50043eef1cf2 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -28,7 +28,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 2905a4929bdc..ba92e25e3016 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -30,8 +30,8 @@ #include #include -#include -#include +#include +#include #include #include diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c index 6ef2e3741f76..e056406d6a11 100644 --- a/drivers/ata/pata_ep93xx.c +++ b/drivers/ata/pata_ep93xx.c @@ -43,7 +43,7 @@ #include #include -#include +#include #include #define DRV_NAME "ep93xx-ide" diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c index c64917ec313d..4aeaea77f72e 100644 --- a/drivers/dma/ep93xx_dma.c +++ b/drivers/dma/ep93xx_dma.c @@ -26,7 +26,7 @@ #include #include -#include +#include #include "dmaengine.h" diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c index c46fc8185469..7363402de8d4 100644 --- a/drivers/input/keyboard/ep93xx_keypad.c +++ b/drivers/input/keyboard/ep93xx_keypad.c @@ -29,7 +29,7 @@ #include #include -#include +#include /* * Keypad Interface Register offsets diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index f97f1d248800..3a219599612a 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -31,8 +31,8 @@ #include #include -#include -#include +#include +#include #define SSPCR0 0x0000 #define SSPCR0_MODE_SHIFT 6 diff --git a/drivers/video/ep93xx-fb.c b/drivers/video/ep93xx-fb.c index 345d96230978..f2c092da84b0 100644 --- a/drivers/video/ep93xx-fb.c +++ b/drivers/video/ep93xx-fb.c @@ -24,7 +24,7 @@ #include #include -#include +#include /* Vertical Frame Timing Registers */ #define EP93XXFB_VLINES_TOTAL 0x0000 /* SW locked */ diff --git a/include/linux/platform_data/dma-ep93xx.h b/include/linux/platform_data/dma-ep93xx.h new file mode 100644 index 000000000000..e82c642fa53c --- /dev/null +++ b/include/linux/platform_data/dma-ep93xx.h @@ -0,0 +1,93 @@ +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H + +#include +#include +#include + +/* + * M2P channels. + * + * Note that these values are also directly used for setting the PPALLOC + * register. + */ +#define EP93XX_DMA_I2S1 0 +#define EP93XX_DMA_I2S2 1 +#define EP93XX_DMA_AAC1 2 +#define EP93XX_DMA_AAC2 3 +#define EP93XX_DMA_AAC3 4 +#define EP93XX_DMA_I2S3 5 +#define EP93XX_DMA_UART1 6 +#define EP93XX_DMA_UART2 7 +#define EP93XX_DMA_UART3 8 +#define EP93XX_DMA_IRDA 9 +/* M2M channels */ +#define EP93XX_DMA_SSP 10 +#define EP93XX_DMA_IDE 11 + +/** + * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine + * @port: peripheral which is requesting the channel + * @direction: TX/RX channel + * @name: optional name for the channel, this is displayed in /proc/interrupts + * + * This information is passed as private channel parameter in a filter + * function. Note that this is only needed for slave/cyclic channels. For + * memcpy channels %NULL data should be passed. + */ +struct ep93xx_dma_data { + int port; + enum dma_transfer_direction direction; + const char *name; +}; + +/** + * struct ep93xx_dma_chan_data - platform specific data for a DMA channel + * @name: name of the channel, used for getting the right clock for the channel + * @base: mapped registers + * @irq: interrupt number used by this channel + */ +struct ep93xx_dma_chan_data { + const char *name; + void __iomem *base; + int irq; +}; + +/** + * struct ep93xx_dma_platform_data - platform data for the dmaengine driver + * @channels: array of channels which are passed to the driver + * @num_channels: number of channels in the array + * + * This structure is passed to the DMA engine driver via platform data. For + * M2P channels, contract is that even channels are for TX and odd for RX. + * There is no requirement for the M2M channels. + */ +struct ep93xx_dma_platform_data { + struct ep93xx_dma_chan_data *channels; + size_t num_channels; +}; + +static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p"); +} + +/** + * ep93xx_dma_chan_direction - returns direction the channel can be used + * @chan: channel + * + * This function can be used in filter functions to find out whether the + * channel supports given DMA direction. Only M2P channels have such + * limitation, for M2M channels the direction is configurable. + */ +static inline enum dma_transfer_direction +ep93xx_dma_chan_direction(struct dma_chan *chan) +{ + if (!ep93xx_dma_chan_is_m2p(chan)) + return DMA_NONE; + + /* even channels are for TX, odd for RX */ + return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; +} + +#endif /* __ASM_ARCH_DMA_H */ diff --git a/include/linux/platform_data/keypad-ep93xx.h b/include/linux/platform_data/keypad-ep93xx.h new file mode 100644 index 000000000000..1e2f4e97f428 --- /dev/null +++ b/include/linux/platform_data/keypad-ep93xx.h @@ -0,0 +1,35 @@ +/* + * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h + */ + +#ifndef __ASM_ARCH_EP93XX_KEYPAD_H +#define __ASM_ARCH_EP93XX_KEYPAD_H + +struct matrix_keymap_data; + +/* flags for the ep93xx_keypad driver */ +#define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */ +#define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */ +#define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */ +#define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */ +#define EP93XX_KEYPAD_KDIV (1<<4) /* 1/4 clock or 1/16 clock */ +#define EP93XX_KEYPAD_AUTOREPEAT (1<<5) /* enable key autorepeat */ + +/** + * struct ep93xx_keypad_platform_data - platform specific device structure + * @keymap_data: pointer to &matrix_keymap_data + * @debounce: debounce start count; terminal count is 0xff + * @prescale: row/column counter pre-scaler load value + * @flags: see above + */ +struct ep93xx_keypad_platform_data { + struct matrix_keymap_data *keymap_data; + unsigned int debounce; + unsigned int prescale; + unsigned int flags; +}; + +#define EP93XX_MATRIX_ROWS (8) +#define EP93XX_MATRIX_COLS (8) + +#endif /* __ASM_ARCH_EP93XX_KEYPAD_H */ diff --git a/include/linux/platform_data/spi-ep93xx.h b/include/linux/platform_data/spi-ep93xx.h new file mode 100644 index 000000000000..9bb63ac13f04 --- /dev/null +++ b/include/linux/platform_data/spi-ep93xx.h @@ -0,0 +1,29 @@ +#ifndef __ASM_MACH_EP93XX_SPI_H +#define __ASM_MACH_EP93XX_SPI_H + +struct spi_device; + +/** + * struct ep93xx_spi_info - EP93xx specific SPI descriptor + * @num_chipselect: number of chip selects on this board, must be + * at least one + * @use_dma: use DMA for the transfers + */ +struct ep93xx_spi_info { + int num_chipselect; + bool use_dma; +}; + +/** + * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device + * @setup: setup the chip select mechanism + * @cleanup: cleanup the chip select mechanism + * @cs_control: control the device chip select + */ +struct ep93xx_spi_chip_ops { + int (*setup)(struct spi_device *spi); + void (*cleanup)(struct spi_device *spi); + void (*cs_control)(struct spi_device *spi, int value); +}; + +#endif /* __ASM_MACH_EP93XX_SPI_H */ diff --git a/include/linux/platform_data/video-ep93xx.h b/include/linux/platform_data/video-ep93xx.h new file mode 100644 index 000000000000..d5ae11d7c453 --- /dev/null +++ b/include/linux/platform_data/video-ep93xx.h @@ -0,0 +1,56 @@ +/* + * arch/arm/mach-ep93xx/include/mach/fb.h + */ + +#ifndef __ASM_ARCH_EP93XXFB_H +#define __ASM_ARCH_EP93XXFB_H + +struct platform_device; +struct fb_videomode; +struct fb_info; + +#define EP93XXFB_USE_MODEDB 0 + +/* VideoAttributes flags */ +#define EP93XXFB_STATE_MACHINE_ENABLE (1 << 0) +#define EP93XXFB_PIXEL_CLOCK_ENABLE (1 << 1) +#define EP93XXFB_VSYNC_ENABLE (1 << 2) +#define EP93XXFB_PIXEL_DATA_ENABLE (1 << 3) +#define EP93XXFB_COMPOSITE_SYNC (1 << 4) +#define EP93XXFB_SYNC_VERT_HIGH (1 << 5) +#define EP93XXFB_SYNC_HORIZ_HIGH (1 << 6) +#define EP93XXFB_SYNC_BLANK_HIGH (1 << 7) +#define EP93XXFB_PCLK_FALLING (1 << 8) +#define EP93XXFB_ENABLE_AC (1 << 9) +#define EP93XXFB_ENABLE_LCD (1 << 10) +#define EP93XXFB_ENABLE_CCIR (1 << 12) +#define EP93XXFB_USE_PARALLEL_INTERFACE (1 << 13) +#define EP93XXFB_ENABLE_INTERRUPT (1 << 14) +#define EP93XXFB_USB_INTERLACE (1 << 16) +#define EP93XXFB_USE_EQUALIZATION (1 << 17) +#define EP93XXFB_USE_DOUBLE_HORZ (1 << 18) +#define EP93XXFB_USE_DOUBLE_VERT (1 << 19) +#define EP93XXFB_USE_BLANK_PIXEL (1 << 20) +#define EP93XXFB_USE_SDCSN0 (0 << 21) +#define EP93XXFB_USE_SDCSN1 (1 << 21) +#define EP93XXFB_USE_SDCSN2 (2 << 21) +#define EP93XXFB_USE_SDCSN3 (3 << 21) + +#define EP93XXFB_ENABLE (EP93XXFB_STATE_MACHINE_ENABLE | \ + EP93XXFB_PIXEL_CLOCK_ENABLE | \ + EP93XXFB_VSYNC_ENABLE | \ + EP93XXFB_PIXEL_DATA_ENABLE) + +struct ep93xxfb_mach_info { + unsigned int num_modes; + const struct fb_videomode *modes; + const struct fb_videomode *default_mode; + int bpp; + unsigned int flags; + + int (*setup)(struct platform_device *pdev); + void (*teardown)(struct platform_device *pdev); + void (*blank)(int blank_mode, struct fb_info *info); +}; + +#endif /* __ASM_ARCH_EP93XXFB_H */ diff --git a/sound/soc/ep93xx/ep93xx-ac97.c b/sound/soc/ep93xx/ep93xx-ac97.c index bdffab33e160..c3521653cfd3 100644 --- a/sound/soc/ep93xx/ep93xx-ac97.c +++ b/sound/soc/ep93xx/ep93xx-ac97.c @@ -21,7 +21,7 @@ #include #include -#include +#include #include "ep93xx-pcm.h" /* diff --git a/sound/soc/ep93xx/ep93xx-i2s.c b/sound/soc/ep93xx/ep93xx-i2s.c index 8df8f6dc474f..ac4a7515e7be 100644 --- a/sound/soc/ep93xx/ep93xx-i2s.c +++ b/sound/soc/ep93xx/ep93xx-i2s.c @@ -28,7 +28,7 @@ #include #include -#include +#include #include "ep93xx-pcm.h" diff --git a/sound/soc/ep93xx/ep93xx-pcm.c b/sound/soc/ep93xx/ep93xx-pcm.c index 4eea98b42bc8..665d9c94cc17 100644 --- a/sound/soc/ep93xx/ep93xx-pcm.c +++ b/sound/soc/ep93xx/ep93xx-pcm.c @@ -25,7 +25,7 @@ #include #include -#include +#include #include #include -- cgit v1.2.3 From 82906b13a6f4f42edec92f0a3e480e1bdd9b3f91 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 24 Aug 2012 15:14:29 +0200 Subject: ARM: imx: move platform_data definitions Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the imx include directories Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Acked-by: Greg Kroah-Hartman Acked-by: Nicolas Pitre Acked-by: Mauro Carvalho Chehab Acked-by: Sascha Hauer Acked-by: Vinod Koul Cc: Russell King Cc: Dan Williams Cc: "Ben Dooks (embedded platforms)" Cc: "Wolfram Sang (embedded platforms)" Cc: Chris Ball Cc: David Woodhouse Cc: Grant Likely Cc: Alan Cox Cc: Felipe Balbi Cc: Alan Stern Cc: Florian Tobias Schandinat Cc: Liam Girdwood Cc: Javier Martin Cc: Shawn Guo Cc: Guennadi Liakhovetski --- arch/arm/mach-imx/ehci-imx25.c | 2 +- arch/arm/mach-imx/ehci-imx27.c | 2 +- arch/arm/mach-imx/ehci-imx31.c | 2 +- arch/arm/mach-imx/ehci-imx35.c | 2 +- arch/arm/mach-imx/ehci-imx5.c | 2 +- arch/arm/mach-imx/mach-mx31moboard.c | 2 +- arch/arm/mach-imx/mx1-camera-fiq-ksym.c | 2 +- .../plat-mxc/devices/platform-sdhci-esdhc-imx.c | 2 +- arch/arm/plat-mxc/include/mach/devices-common.h | 32 ++++----- arch/arm/plat-mxc/include/mach/dma.h | 67 ----------------- arch/arm/plat-mxc/include/mach/esdhc.h | 43 ----------- arch/arm/plat-mxc/include/mach/i2c.h | 21 ------ arch/arm/plat-mxc/include/mach/imx-uart.h | 35 --------- arch/arm/plat-mxc/include/mach/imxfb.h | 84 ---------------------- arch/arm/plat-mxc/include/mach/mmc.h | 39 ---------- arch/arm/plat-mxc/include/mach/mx1_camera.h | 35 --------- arch/arm/plat-mxc/include/mach/mx21-usbhost.h | 38 ---------- arch/arm/plat-mxc/include/mach/mx2_cam.h | 46 ------------ arch/arm/plat-mxc/include/mach/mx3_camera.h | 48 ------------- arch/arm/plat-mxc/include/mach/mx3fb.h | 53 -------------- arch/arm/plat-mxc/include/mach/mxc_ehci.h | 59 --------------- arch/arm/plat-mxc/include/mach/mxc_nand.h | 32 --------- arch/arm/plat-mxc/include/mach/sdma.h | 59 --------------- arch/arm/plat-mxc/include/mach/spi.h | 27 ------- arch/arm/plat-mxc/include/mach/ssi.h | 21 ------ arch/arm/plat-mxc/include/mach/usb.h | 23 ------ arch/arm/plat-mxc/ssi-fiq-ksym.c | 2 +- drivers/dma/imx-dma.c | 2 +- drivers/dma/imx-sdma.c | 4 +- drivers/i2c/busses/i2c-imx.c | 2 +- drivers/media/video/mx1_camera.c | 2 +- drivers/media/video/mx2_camera.c | 2 +- drivers/media/video/mx3_camera.c | 4 +- drivers/mmc/host/mxcmmc.c | 4 +- drivers/mmc/host/sdhci-esdhc-imx.c | 2 +- drivers/mtd/nand/mxc_nand.c | 2 +- drivers/spi/spi-imx.c | 2 +- drivers/tty/serial/imx.c | 2 +- drivers/usb/gadget/imx_udc.c | 2 +- drivers/usb/host/ehci-mxc.c | 2 +- drivers/usb/host/imx21-hcd.h | 2 +- drivers/video/imxfb.c | 2 +- drivers/video/mx3fb.c | 4 +- include/linux/platform_data/asoc-imx-ssi.h | 21 ++++++ include/linux/platform_data/camera-mx1.h | 35 +++++++++ include/linux/platform_data/camera-mx2.h | 46 ++++++++++++ include/linux/platform_data/camera-mx3.h | 48 +++++++++++++ include/linux/platform_data/dma-imx-sdma.h | 59 +++++++++++++++ include/linux/platform_data/dma-imx.h | 67 +++++++++++++++++ include/linux/platform_data/i2c-imx.h | 21 ++++++ include/linux/platform_data/mmc-esdhc-imx.h | 43 +++++++++++ include/linux/platform_data/mmc-mxcmmc.h | 39 ++++++++++ include/linux/platform_data/mtd-mxc_nand.h | 32 +++++++++ include/linux/platform_data/serial-imx.h | 35 +++++++++ include/linux/platform_data/spi-imx.h | 27 +++++++ include/linux/platform_data/usb-ehci-mxc.h | 59 +++++++++++++++ include/linux/platform_data/usb-imx_udc.h | 23 ++++++ include/linux/platform_data/usb-mx2.h | 38 ++++++++++ include/linux/platform_data/video-imxfb.h | 84 ++++++++++++++++++++++ include/linux/platform_data/video-mx3fb.h | 53 ++++++++++++++ sound/soc/fsl/imx-pcm-dma.c | 2 +- sound/soc/fsl/imx-pcm-fiq.c | 2 +- sound/soc/fsl/imx-ssi.c | 2 +- sound/soc/fsl/imx-ssi.h | 2 +- 64 files changed, 779 insertions(+), 779 deletions(-) delete mode 100644 arch/arm/plat-mxc/include/mach/dma.h delete mode 100644 arch/arm/plat-mxc/include/mach/esdhc.h delete mode 100644 arch/arm/plat-mxc/include/mach/i2c.h delete mode 100644 arch/arm/plat-mxc/include/mach/imx-uart.h delete mode 100644 arch/arm/plat-mxc/include/mach/imxfb.h delete mode 100644 arch/arm/plat-mxc/include/mach/mmc.h delete mode 100644 arch/arm/plat-mxc/include/mach/mx1_camera.h delete mode 100644 arch/arm/plat-mxc/include/mach/mx21-usbhost.h delete mode 100644 arch/arm/plat-mxc/include/mach/mx2_cam.h delete mode 100644 arch/arm/plat-mxc/include/mach/mx3_camera.h delete mode 100644 arch/arm/plat-mxc/include/mach/mx3fb.h delete mode 100644 arch/arm/plat-mxc/include/mach/mxc_ehci.h delete mode 100644 arch/arm/plat-mxc/include/mach/mxc_nand.h delete mode 100644 arch/arm/plat-mxc/include/mach/sdma.h delete mode 100644 arch/arm/plat-mxc/include/mach/spi.h delete mode 100644 arch/arm/plat-mxc/include/mach/ssi.h delete mode 100644 arch/arm/plat-mxc/include/mach/usb.h create mode 100644 include/linux/platform_data/asoc-imx-ssi.h create mode 100644 include/linux/platform_data/camera-mx1.h create mode 100644 include/linux/platform_data/camera-mx2.h create mode 100644 include/linux/platform_data/camera-mx3.h create mode 100644 include/linux/platform_data/dma-imx-sdma.h create mode 100644 include/linux/platform_data/dma-imx.h create mode 100644 include/linux/platform_data/i2c-imx.h create mode 100644 include/linux/platform_data/mmc-esdhc-imx.h create mode 100644 include/linux/platform_data/mmc-mxcmmc.h create mode 100644 include/linux/platform_data/mtd-mxc_nand.h create mode 100644 include/linux/platform_data/serial-imx.h create mode 100644 include/linux/platform_data/spi-imx.h create mode 100644 include/linux/platform_data/usb-ehci-mxc.h create mode 100644 include/linux/platform_data/usb-imx_udc.h create mode 100644 include/linux/platform_data/usb-mx2.h create mode 100644 include/linux/platform_data/video-imxfb.h create mode 100644 include/linux/platform_data/video-mx3fb.h (limited to 'include/linux') diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c index 05bb41d99728..412c583a24b0 100644 --- a/arch/arm/mach-imx/ehci-imx25.c +++ b/arch/arm/mach-imx/ehci-imx25.c @@ -17,7 +17,7 @@ #include #include -#include +#include #define USBCTRL_OTGBASE_OFFSET 0x600 diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c index fa69419eabdd..cd6e1f81508d 100644 --- a/arch/arm/mach-imx/ehci-imx27.c +++ b/arch/arm/mach-imx/ehci-imx27.c @@ -17,7 +17,7 @@ #include #include -#include +#include #define USBCTRL_OTGBASE_OFFSET 0x600 diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c index faad0f15ac7f..9a880c78af34 100644 --- a/arch/arm/mach-imx/ehci-imx31.c +++ b/arch/arm/mach-imx/ehci-imx31.c @@ -17,7 +17,7 @@ #include #include -#include +#include #define USBCTRL_OTGBASE_OFFSET 0x600 diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c index 73574c30cf50..779e16eb65cb 100644 --- a/arch/arm/mach-imx/ehci-imx35.c +++ b/arch/arm/mach-imx/ehci-imx35.c @@ -17,7 +17,7 @@ #include #include -#include +#include #define USBCTRL_OTGBASE_OFFSET 0x600 diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c index a6a4afb0ad62..cf8d00e5cce1 100644 --- a/arch/arm/mach-imx/ehci-imx5.c +++ b/arch/arm/mach-imx/ehci-imx5.c @@ -17,7 +17,7 @@ #include #include -#include +#include #define MXC_OTG_OFFSET 0 #define MXC_H1_OFFSET 0x200 diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index d46290b288ed..459e754ef8c9 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -47,7 +47,7 @@ #include #include #include -#include +#include #include "devices-imx31.h" diff --git a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c index b09ee12a4ff0..fb38436ca67f 100644 --- a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c +++ b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c @@ -11,7 +11,7 @@ #include #include -#include +#include /* IMX camera FIQ handler */ EXPORT_SYMBOL(mx1_camera_sof_fiq_start); diff --git a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c index 5955f5da82ee..3793e475cd95 100644 --- a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c +++ b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c @@ -8,7 +8,7 @@ #include #include -#include +#include #define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \ { \ diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index a7f5bb1084d7..9e3e3d8ae8c2 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -9,7 +9,7 @@ #include #include #include -#include +#include extern struct device mxc_aips_bus; extern struct device mxc_ahb_bus; @@ -74,7 +74,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc( struct platform_device *__init imx_add_gpio_keys( const struct gpio_keys_platform_data *pdata); -#include +#include struct imx_imx21_hcd_data { resource_size_t iobase; resource_size_t irq; @@ -98,7 +98,7 @@ struct imx_imxdi_rtc_data { struct platform_device *__init imx_add_imxdi_rtc( const struct imx_imxdi_rtc_data *data); -#include +#include struct imx_imx_fb_data { resource_size_t iobase; resource_size_t iosize; @@ -108,7 +108,7 @@ struct platform_device *__init imx_add_imx_fb( const struct imx_imx_fb_data *data, const struct imx_fb_platform_data *pdata); -#include +#include struct imx_imx_i2c_data { int id; resource_size_t iobase; @@ -129,7 +129,7 @@ struct platform_device *__init imx_add_imx_keypad( const struct imx_imx_keypad_data *data, const struct matrix_keymap_data *pdata); -#include +#include struct imx_imx_ssi_data { int id; resource_size_t iobase; @@ -144,7 +144,7 @@ struct platform_device *__init imx_add_imx_ssi( const struct imx_imx_ssi_data *data, const struct imx_ssi_platform_data *pdata); -#include +#include struct imx_imx_uart_3irq_data { int id; resource_size_t iobase; @@ -167,7 +167,7 @@ struct platform_device *__init imx_add_imx_uart_1irq( const struct imx_imx_uart_1irq_data *data, const struct imxuart_platform_data *pdata); -#include +#include struct imx_imx_udc_data { resource_size_t iobase; resource_size_t iosize; @@ -183,8 +183,8 @@ struct platform_device *__init imx_add_imx_udc( const struct imx_imx_udc_data *data, const struct imxusb_platform_data *pdata); -#include -#include +#include +#include struct imx_ipu_core_data { resource_size_t iobase; resource_size_t synirq; @@ -199,7 +199,7 @@ struct platform_device *__init imx_add_mx3_sdc_fb( const struct imx_ipu_core_data *data, struct mx3fb_platform_data *pdata); -#include +#include struct imx_mx1_camera_data { resource_size_t iobase; resource_size_t iosize; @@ -209,7 +209,7 @@ struct platform_device *__init imx_add_mx1_camera( const struct imx_mx1_camera_data *data, const struct mx1_camera_pdata *pdata); -#include +#include struct imx_mx2_camera_data { resource_size_t iobasecsi; resource_size_t iosizecsi; @@ -224,7 +224,7 @@ struct platform_device *__init imx_add_mx2_camera( struct platform_device *__init imx_add_mx2_emmaprp( const struct imx_mx2_camera_data *data); -#include +#include struct imx_mxc_ehci_data { int id; resource_size_t iobase; @@ -234,7 +234,7 @@ struct platform_device *__init imx_add_mxc_ehci( const struct imx_mxc_ehci_data *data, const struct mxc_usbh_platform_data *pdata); -#include +#include struct imx_mxc_mmc_data { int id; resource_size_t iobase; @@ -246,7 +246,7 @@ struct platform_device *__init imx_add_mxc_mmc( const struct imx_mxc_mmc_data *data, const struct imxmmc_platform_data *pdata); -#include +#include struct imx_mxc_nand_data { /* * id is traditionally 0, but -1 is more appropriate. We use -1 for new @@ -295,7 +295,7 @@ struct imx_mxc_w1_data { struct platform_device *__init imx_add_mxc_w1( const struct imx_mxc_w1_data *data); -#include +#include struct imx_sdhci_esdhc_imx_data { const char *devid; int id; @@ -306,7 +306,7 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx( const struct imx_sdhci_esdhc_imx_data *data, const struct esdhc_platform_data *pdata); -#include +#include struct imx_spi_imx_data { const char *devid; int id; diff --git a/arch/arm/plat-mxc/include/mach/dma.h b/arch/arm/plat-mxc/include/mach/dma.h deleted file mode 100644 index 1b9080385b46..000000000000 --- a/arch/arm/plat-mxc/include/mach/dma.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_DMA_H__ -#define __ASM_ARCH_MXC_DMA_H__ - -#include -#include -#include - -/* - * This enumerates peripheral types. Used for SDMA. - */ -enum sdma_peripheral_type { - IMX_DMATYPE_SSI, /* MCU domain SSI */ - IMX_DMATYPE_SSI_SP, /* Shared SSI */ - IMX_DMATYPE_MMC, /* MMC */ - IMX_DMATYPE_SDHC, /* SDHC */ - IMX_DMATYPE_UART, /* MCU domain UART */ - IMX_DMATYPE_UART_SP, /* Shared UART */ - IMX_DMATYPE_FIRI, /* FIRI */ - IMX_DMATYPE_CSPI, /* MCU domain CSPI */ - IMX_DMATYPE_CSPI_SP, /* Shared CSPI */ - IMX_DMATYPE_SIM, /* SIM */ - IMX_DMATYPE_ATA, /* ATA */ - IMX_DMATYPE_CCM, /* CCM */ - IMX_DMATYPE_EXT, /* External peripheral */ - IMX_DMATYPE_MSHC, /* Memory Stick Host Controller */ - IMX_DMATYPE_MSHC_SP, /* Shared Memory Stick Host Controller */ - IMX_DMATYPE_DSP, /* DSP */ - IMX_DMATYPE_MEMORY, /* Memory */ - IMX_DMATYPE_FIFO_MEMORY,/* FIFO type Memory */ - IMX_DMATYPE_SPDIF, /* SPDIF */ - IMX_DMATYPE_IPU_MEMORY, /* IPU Memory */ - IMX_DMATYPE_ASRC, /* ASRC */ - IMX_DMATYPE_ESAI, /* ESAI */ -}; - -enum imx_dma_prio { - DMA_PRIO_HIGH = 0, - DMA_PRIO_MEDIUM = 1, - DMA_PRIO_LOW = 2 -}; - -struct imx_dma_data { - int dma_request; /* DMA request line */ - enum sdma_peripheral_type peripheral_type; - int priority; -}; - -static inline int imx_dma_is_ipu(struct dma_chan *chan) -{ - return !strcmp(dev_name(chan->device->dev), "ipu-core"); -} - -static inline int imx_dma_is_general_purpose(struct dma_chan *chan) -{ - return strstr(dev_name(chan->device->dev), "sdma") || - !strcmp(dev_name(chan->device->dev), "imx-dma"); -} - -#endif diff --git a/arch/arm/plat-mxc/include/mach/esdhc.h b/arch/arm/plat-mxc/include/mach/esdhc.h deleted file mode 100644 index aaf97481f413..000000000000 --- a/arch/arm/plat-mxc/include/mach/esdhc.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright 2010 Wolfram Sang - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; version 2 - * of the License. - */ - -#ifndef __ASM_ARCH_IMX_ESDHC_H -#define __ASM_ARCH_IMX_ESDHC_H - -enum wp_types { - ESDHC_WP_NONE, /* no WP, neither controller nor gpio */ - ESDHC_WP_CONTROLLER, /* mmc controller internal WP */ - ESDHC_WP_GPIO, /* external gpio pin for WP */ -}; - -enum cd_types { - ESDHC_CD_NONE, /* no CD, neither controller nor gpio */ - ESDHC_CD_CONTROLLER, /* mmc controller internal CD */ - ESDHC_CD_GPIO, /* external gpio pin for CD */ - ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */ -}; - -/** - * struct esdhc_platform_data - platform data for esdhc on i.MX - * - * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35. - * - * @wp_gpio: gpio for write_protect - * @cd_gpio: gpio for card_detect interrupt - * @wp_type: type of write_protect method (see wp_types enum above) - * @cd_type: type of card_detect method (see cd_types enum above) - */ - -struct esdhc_platform_data { - unsigned int wp_gpio; - unsigned int cd_gpio; - enum wp_types wp_type; - enum cd_types cd_type; -}; -#endif /* __ASM_ARCH_IMX_ESDHC_H */ diff --git a/arch/arm/plat-mxc/include/mach/i2c.h b/arch/arm/plat-mxc/include/mach/i2c.h deleted file mode 100644 index 8289d915e615..000000000000 --- a/arch/arm/plat-mxc/include/mach/i2c.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * i2c.h - i.MX I2C driver header file - * - * Copyright (c) 2008, Darius Augulis - * - * This file is released under the GPLv2 - */ - -#ifndef __ASM_ARCH_I2C_H_ -#define __ASM_ARCH_I2C_H_ - -/** - * struct imxi2c_platform_data - structure of platform data for MXC I2C driver - * @bitrate: Bus speed measured in Hz - * - **/ -struct imxi2c_platform_data { - u32 bitrate; -}; - -#endif /* __ASM_ARCH_I2C_H_ */ diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h deleted file mode 100644 index 4adec9b154dd..000000000000 --- a/arch/arm/plat-mxc/include/mach/imx-uart.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2008 by Sascha Hauer - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef ASMARM_ARCH_UART_H -#define ASMARM_ARCH_UART_H - -#define IMXUART_HAVE_RTSCTS (1<<0) -#define IMXUART_IRDA (1<<1) - -struct imxuart_platform_data { - int (*init)(struct platform_device *pdev); - void (*exit)(struct platform_device *pdev); - unsigned int flags; - void (*irda_enable)(int enable); - unsigned int irda_inv_rx:1; - unsigned int irda_inv_tx:1; - unsigned short transceiver_delay; -}; - -#endif diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h deleted file mode 100644 index 9de8f062ad5d..000000000000 --- a/arch/arm/plat-mxc/include/mach/imxfb.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * This structure describes the machine which we are running on. - */ -#ifndef __MACH_IMXFB_H__ -#define __MACH_IMXFB_H__ - -#include - -#define PCR_TFT (1 << 31) -#define PCR_COLOR (1 << 30) -#define PCR_PBSIZ_1 (0 << 28) -#define PCR_PBSIZ_2 (1 << 28) -#define PCR_PBSIZ_4 (2 << 28) -#define PCR_PBSIZ_8 (3 << 28) -#define PCR_BPIX_1 (0 << 25) -#define PCR_BPIX_2 (1 << 25) -#define PCR_BPIX_4 (2 << 25) -#define PCR_BPIX_8 (3 << 25) -#define PCR_BPIX_12 (4 << 25) -#define PCR_BPIX_16 (5 << 25) -#define PCR_BPIX_18 (6 << 25) -#define PCR_PIXPOL (1 << 24) -#define PCR_FLMPOL (1 << 23) -#define PCR_LPPOL (1 << 22) -#define PCR_CLKPOL (1 << 21) -#define PCR_OEPOL (1 << 20) -#define PCR_SCLKIDLE (1 << 19) -#define PCR_END_SEL (1 << 18) -#define PCR_END_BYTE_SWAP (1 << 17) -#define PCR_REV_VS (1 << 16) -#define PCR_ACD_SEL (1 << 15) -#define PCR_ACD(x) (((x) & 0x7f) << 8) -#define PCR_SCLK_SEL (1 << 7) -#define PCR_SHARP (1 << 6) -#define PCR_PCD(x) ((x) & 0x3f) - -#define PWMR_CLS(x) (((x) & 0x1ff) << 16) -#define PWMR_LDMSK (1 << 15) -#define PWMR_SCR1 (1 << 10) -#define PWMR_SCR0 (1 << 9) -#define PWMR_CC_EN (1 << 8) -#define PWMR_PW(x) ((x) & 0xff) - -#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26) -#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16) -#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8) -#define LSCR1_GRAY2(x) (((x) & 0xf) << 4) -#define LSCR1_GRAY1(x) (((x) & 0xf)) - -#define DMACR_BURST (1 << 31) -#define DMACR_HM(x) (((x) & 0xf) << 16) -#define DMACR_TM(x) ((x) & 0xf) - -struct imx_fb_videomode { - struct fb_videomode mode; - u32 pcr; - unsigned char bpp; -}; - -struct imx_fb_platform_data { - struct imx_fb_videomode *mode; - int num_modes; - - u_int cmap_greyscale:1, - cmap_inverse:1, - cmap_static:1, - unused:29; - - u_int pwmr; - u_int lscr1; - u_int dmacr; - - u_char * fixed_screen_cpu; - dma_addr_t fixed_screen_dma; - - int (*init)(struct platform_device *); - void (*exit)(struct platform_device *); - - void (*lcd_power)(int); - void (*backlight_power)(int); -}; - -void set_imx_fb_info(struct imx_fb_platform_data *); -#endif /* ifndef __MACH_IMXFB_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mmc.h b/arch/arm/plat-mxc/include/mach/mmc.h deleted file mode 100644 index 29115f405af9..000000000000 --- a/arch/arm/plat-mxc/include/mach/mmc.h +++ /dev/null @@ -1,39 +0,0 @@ -#ifndef ASMARM_ARCH_MMC_H -#define ASMARM_ARCH_MMC_H - -#include - -struct device; - -/* board specific SDHC data, optional. - * If not present, a writable card with 3,3V is assumed. - */ -struct imxmmc_platform_data { - /* Return values for the get_ro callback should be: - * 0 for a read/write card - * 1 for a read-only card - * -ENOSYS when not supported (equal to NULL callback) - * or a negative errno value when something bad happened - */ - int (*get_ro)(struct device *); - - /* board specific hook to (de)initialize the SD slot. - * The board code can call 'handler' on a card detection - * change giving data as argument. - */ - int (*init)(struct device *dev, irq_handler_t handler, void *data); - void (*exit)(struct device *dev, void *data); - - /* available voltages. If not given, assume - * MMC_VDD_32_33 | MMC_VDD_33_34 - */ - unsigned int ocr_avail; - - /* adjust slot voltage */ - void (*setpower)(struct device *, unsigned int vdd); - - /* enable card detect using DAT3 */ - int dat3_card_detect; -}; - -#endif diff --git a/arch/arm/plat-mxc/include/mach/mx1_camera.h b/arch/arm/plat-mxc/include/mach/mx1_camera.h deleted file mode 100644 index 4fd6c70314b4..000000000000 --- a/arch/arm/plat-mxc/include/mach/mx1_camera.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * mx1_camera.h - i.MX1/i.MXL camera driver header file - * - * Copyright (c) 2008, Paulius Zaleckas - * Copyright (C) 2009, Darius Augulis - * - * Based on PXA camera.h file: - * Copyright (C) 2003, Intel Corporation - * Copyright (C) 2008, Guennadi Liakhovetski - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_CAMERA_H_ -#define __ASM_ARCH_CAMERA_H_ - -#define MX1_CAMERA_DATA_HIGH 1 -#define MX1_CAMERA_PCLK_RISING 2 -#define MX1_CAMERA_VSYNC_HIGH 4 - -extern unsigned char mx1_camera_sof_fiq_start, mx1_camera_sof_fiq_end; - -/** - * struct mx1_camera_pdata - i.MX1/i.MXL camera platform data - * @mclk_10khz: master clock frequency in 10kHz units - * @flags: MX1 camera platform flags - */ -struct mx1_camera_pdata { - unsigned long mclk_10khz; - unsigned long flags; -}; - -#endif /* __ASM_ARCH_CAMERA_H_ */ diff --git a/arch/arm/plat-mxc/include/mach/mx21-usbhost.h b/arch/arm/plat-mxc/include/mach/mx21-usbhost.h deleted file mode 100644 index 22d0b596262c..000000000000 --- a/arch/arm/plat-mxc/include/mach/mx21-usbhost.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Copyright (C) 2009 Martin Fuzzey - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MX21_USBH -#define __ASM_ARCH_MX21_USBH - -enum mx21_usbh_xcvr { - /* Values below as used by hardware (HWMODE register) */ - MX21_USBXCVR_TXDIF_RXDIF = 0, - MX21_USBXCVR_TXDIF_RXSE = 1, - MX21_USBXCVR_TXSE_RXDIF = 2, - MX21_USBXCVR_TXSE_RXSE = 3, -}; - -struct mx21_usbh_platform_data { - enum mx21_usbh_xcvr host_xcvr; /* tranceiver mode host 1,2 ports */ - enum mx21_usbh_xcvr otg_xcvr; /* tranceiver mode otg (as host) port */ - u16 enable_host1:1, - enable_host2:1, - enable_otg_host:1, /* enable "OTG" port (as host) */ - host1_xcverless:1, /* traceiverless host1 port */ - host1_txenoe:1, /* output enable host1 transmit enable */ - otg_ext_xcvr:1, /* external tranceiver for OTG port */ - unused:10; -}; - -#endif /* __ASM_ARCH_MX21_USBH */ diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h deleted file mode 100644 index 3c080a32dbf5..000000000000 --- a/arch/arm/plat-mxc/include/mach/mx2_cam.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * mx2-cam.h - i.MX27/i.MX25 camera driver header file - * - * Copyright (C) 2003, Intel Corporation - * Copyright (C) 2008, Sascha Hauer - * Copyright (C) 2010, Baruch Siach - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MX2_CAM_H_ -#define __MACH_MX2_CAM_H_ - -#define MX2_CAMERA_SWAP16 (1 << 0) -#define MX2_CAMERA_EXT_VSYNC (1 << 1) -#define MX2_CAMERA_CCIR (1 << 2) -#define MX2_CAMERA_CCIR_INTERLACE (1 << 3) -#define MX2_CAMERA_HSYNC_HIGH (1 << 4) -#define MX2_CAMERA_GATED_CLOCK (1 << 5) -#define MX2_CAMERA_INV_DATA (1 << 6) -#define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7) -#define MX2_CAMERA_PACK_DIR_MSB (1 << 8) - -/** - * struct mx2_camera_platform_data - optional platform data for mx2_camera - * @flags: any combination of MX2_CAMERA_* - * @clk: clock rate of the csi block / 2 - */ -struct mx2_camera_platform_data { - unsigned long flags; - unsigned long clk; -}; - -#endif /* __MACH_MX2_CAM_H_ */ diff --git a/arch/arm/plat-mxc/include/mach/mx3_camera.h b/arch/arm/plat-mxc/include/mach/mx3_camera.h deleted file mode 100644 index f226ee3777e1..000000000000 --- a/arch/arm/plat-mxc/include/mach/mx3_camera.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * mx3_camera.h - i.MX3x camera driver header file - * - * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering, - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _MX3_CAMERA_H_ -#define _MX3_CAMERA_H_ - -#include - -#define MX3_CAMERA_CLK_SRC 1 -#define MX3_CAMERA_EXT_VSYNC 2 -#define MX3_CAMERA_DP 4 -#define MX3_CAMERA_PCP 8 -#define MX3_CAMERA_HSP 0x10 -#define MX3_CAMERA_VSP 0x20 -#define MX3_CAMERA_DATAWIDTH_4 0x40 -#define MX3_CAMERA_DATAWIDTH_8 0x80 -#define MX3_CAMERA_DATAWIDTH_10 0x100 -#define MX3_CAMERA_DATAWIDTH_15 0x200 - -#define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \ - MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15) - -/** - * struct mx3_camera_pdata - i.MX3x camera platform data - * @flags: MX3_CAMERA_* flags - * @mclk_10khz: master clock frequency in 10kHz units - * @dma_dev: IPU DMA device to match against in channel allocation - */ -struct mx3_camera_pdata { - unsigned long flags; - unsigned long mclk_10khz; - struct device *dma_dev; -}; - -#endif diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h deleted file mode 100644 index fdbe60001542..000000000000 --- a/arch/arm/plat-mxc/include/mach/mx3fb.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright (C) 2008 - * Guennadi Liakhovetski, DENX Software Engineering, - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MX3FB_H__ -#define __ASM_ARCH_MX3FB_H__ - -#include -#include - -/* Proprietary FB_SYNC_ flags */ -#define FB_SYNC_OE_ACT_HIGH 0x80000000 -#define FB_SYNC_CLK_INVERT 0x40000000 -#define FB_SYNC_DATA_INVERT 0x20000000 -#define FB_SYNC_CLK_IDLE_EN 0x10000000 -#define FB_SYNC_SHARP_MODE 0x08000000 -#define FB_SYNC_SWAP_RGB 0x04000000 -#define FB_SYNC_CLK_SEL_EN 0x02000000 - -/* - * Specify the way your display is connected. The IPU can arbitrarily - * map the internal colors to the external data lines. We only support - * the following mappings at the moment. - */ -enum disp_data_mapping { - /* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */ - IPU_DISP_DATA_MAPPING_RGB666, - /* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */ - IPU_DISP_DATA_MAPPING_RGB565, - /* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */ - IPU_DISP_DATA_MAPPING_RGB888, -}; - -/** - * struct mx3fb_platform_data - mx3fb platform data - * - * @dma_dev: pointer to the dma-device, used for dma-slave connection - * @mode: pointer to a platform-provided per mxc_register_fb() videomode - */ -struct mx3fb_platform_data { - struct device *dma_dev; - const char *name; - const struct fb_videomode *mode; - int num_modes; - enum disp_data_mapping disp_data_fmt; -}; - -#endif diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h deleted file mode 100644 index 7eb9d1329671..000000000000 --- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H -#define __INCLUDE_ASM_ARCH_MXC_EHCI_H - -/* values for portsc field */ -#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23) -#define MXC_EHCI_FORCE_FS (1 << 24) -#define MXC_EHCI_UTMI_8BIT (0 << 28) -#define MXC_EHCI_UTMI_16BIT (1 << 28) -#define MXC_EHCI_SERIAL (1 << 29) -#define MXC_EHCI_MODE_UTMI (0 << 30) -#define MXC_EHCI_MODE_PHILIPS (1 << 30) -#define MXC_EHCI_MODE_ULPI (2 << 30) -#define MXC_EHCI_MODE_SERIAL (3 << 30) - -/* values for flags field */ -#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0) -#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0) -#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0) -#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0) -#define MXC_EHCI_INTERFACE_MASK (0xf) - -#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) -#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6) -#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7) -#define MXC_EHCI_TTL_ENABLED (1 << 8) - -#define MXC_EHCI_INTERNAL_PHY (1 << 9) -#define MXC_EHCI_IPPUE_DOWN (1 << 10) -#define MXC_EHCI_IPPUE_UP (1 << 11) -#define MXC_EHCI_WAKEUP_ENABLED (1 << 12) -#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13) - -#define MXC_USBCTRL_OFFSET 0 -#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8 -#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc -#define MXC_USBH2CTRL_OFFSET 0x14 - -#define MX5_USBOTHER_REGS_OFFSET 0x800 - -/* USB_PHY_CTRL_FUNC2*/ -#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3 -#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT 0 - -struct mxc_usbh_platform_data { - int (*init)(struct platform_device *pdev); - int (*exit)(struct platform_device *pdev); - - unsigned int portsc; - struct usb_phy *otg; -}; - -int mx51_initialize_usb_hw(int port, unsigned int flags); -int mx25_initialize_usb_hw(int port, unsigned int flags); -int mx31_initialize_usb_hw(int port, unsigned int flags); -int mx35_initialize_usb_hw(int port, unsigned int flags); -int mx27_initialize_usb_hw(int port, unsigned int flags); - -#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */ - diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h deleted file mode 100644 index 6bb96ef1600b..000000000000 --- a/arch/arm/plat-mxc/include/mach/mxc_nand.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Sascha Hauer, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_NAND_H -#define __ASM_ARCH_NAND_H - -#include - -struct mxc_nand_platform_data { - unsigned int width; /* data bus width in bytes */ - unsigned int hw_ecc:1; /* 0 if suppress hardware ECC */ - unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */ - struct mtd_partition *parts; /* partition table */ - int nr_parts; /* size of parts */ -}; -#endif /* __ASM_ARCH_NAND_H */ diff --git a/arch/arm/plat-mxc/include/mach/sdma.h b/arch/arm/plat-mxc/include/mach/sdma.h deleted file mode 100644 index 3a3942823c20..000000000000 --- a/arch/arm/plat-mxc/include/mach/sdma.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef __MACH_MXC_SDMA_H__ -#define __MACH_MXC_SDMA_H__ - -/** - * struct sdma_script_start_addrs - SDMA script start pointers - * - * start addresses of the different functions in the physical - * address space of the SDMA engine. - */ -struct sdma_script_start_addrs { - s32 ap_2_ap_addr; - s32 ap_2_bp_addr; - s32 ap_2_ap_fixed_addr; - s32 bp_2_ap_addr; - s32 loopback_on_dsp_side_addr; - s32 mcu_interrupt_only_addr; - s32 firi_2_per_addr; - s32 firi_2_mcu_addr; - s32 per_2_firi_addr; - s32 mcu_2_firi_addr; - s32 uart_2_per_addr; - s32 uart_2_mcu_addr; - s32 per_2_app_addr; - s32 mcu_2_app_addr; - s32 per_2_per_addr; - s32 uartsh_2_per_addr; - s32 uartsh_2_mcu_addr; - s32 per_2_shp_addr; - s32 mcu_2_shp_addr; - s32 ata_2_mcu_addr; - s32 mcu_2_ata_addr; - s32 app_2_per_addr; - s32 app_2_mcu_addr; - s32 shp_2_per_addr; - s32 shp_2_mcu_addr; - s32 mshc_2_mcu_addr; - s32 mcu_2_mshc_addr; - s32 spdif_2_mcu_addr; - s32 mcu_2_spdif_addr; - s32 asrc_2_mcu_addr; - s32 ext_mem_2_ipu_addr; - s32 descrambler_addr; - s32 dptc_dvfs_addr; - s32 utra_addr; - s32 ram_code_start_addr; -}; - -/** - * struct sdma_platform_data - platform specific data for SDMA engine - * - * @fw_name The firmware name - * @script_addrs SDMA scripts addresses in SDMA ROM - */ -struct sdma_platform_data { - char *fw_name; - struct sdma_script_start_addrs *script_addrs; -}; - -#endif /* __MACH_MXC_SDMA_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/spi.h b/arch/arm/plat-mxc/include/mach/spi.h deleted file mode 100644 index 08be445e8eb8..000000000000 --- a/arch/arm/plat-mxc/include/mach/spi.h +++ /dev/null @@ -1,27 +0,0 @@ - -#ifndef __MACH_SPI_H_ -#define __MACH_SPI_H_ - -/* - * struct spi_imx_master - device.platform_data for SPI controller devices. - * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio - * pins, numbers < 0 mean internal CSPI chipselects according - * to MXC_SPI_CS(). Normally you want to use gpio based chip - * selects as the CSPI module tries to be intelligent about - * when to assert the chipselect: The CSPI module deasserts the - * chipselect once it runs out of input data. The other problem - * is that it is not possible to mix between high active and low - * active chipselects on one single bus using the internal - * chipselects. Unfortunately Freescale decided to put some - * chipselects on dedicated pins which are not usable as gpios, - * so we have to support the internal chipselects. - * @num_chipselect: ARRAY_SIZE(chipselect) - */ -struct spi_imx_master { - int *chipselect; - int num_chipselect; -}; - -#define MXC_SPI_CS(no) ((no) - 32) - -#endif /* __MACH_SPI_H_*/ diff --git a/arch/arm/plat-mxc/include/mach/ssi.h b/arch/arm/plat-mxc/include/mach/ssi.h deleted file mode 100644 index 63f3c2804239..000000000000 --- a/arch/arm/plat-mxc/include/mach/ssi.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __MACH_SSI_H -#define __MACH_SSI_H - -struct snd_ac97; - -extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end; -extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer; - -struct imx_ssi_platform_data { - unsigned int flags; -#define IMX_SSI_DMA (1 << 0) -#define IMX_SSI_USE_AC97 (1 << 1) -#define IMX_SSI_NET (1 << 2) -#define IMX_SSI_SYN (1 << 3) -#define IMX_SSI_USE_I2S_SLAVE (1 << 4) - void (*ac97_reset) (struct snd_ac97 *ac97); - void (*ac97_warm_reset)(struct snd_ac97 *ac97); -}; - -#endif /* __MACH_SSI_H */ - diff --git a/arch/arm/plat-mxc/include/mach/usb.h b/arch/arm/plat-mxc/include/mach/usb.h deleted file mode 100644 index be273371f34a..000000000000 --- a/arch/arm/plat-mxc/include/mach/usb.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2008 Darius Augulis - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MXC_USB -#define __ASM_ARCH_MXC_USB - -struct imxusb_platform_data { - int (*init)(struct device *); - void (*exit)(struct device *); -}; - -#endif /* __ASM_ARCH_MXC_USB */ diff --git a/arch/arm/plat-mxc/ssi-fiq-ksym.c b/arch/arm/plat-mxc/ssi-fiq-ksym.c index b5fad454da78..792090f9a032 100644 --- a/arch/arm/plat-mxc/ssi-fiq-ksym.c +++ b/arch/arm/plat-mxc/ssi-fiq-ksym.c @@ -10,7 +10,7 @@ #include -#include +#include EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer); EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer); diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index 5084975d793c..b90aaec4ccc4 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -28,7 +28,7 @@ #include #include -#include +#include #include #include "dmaengine.h" diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 1dc2a4ad0026..1b781d6ac425 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -38,8 +38,8 @@ #include #include -#include -#include +#include +#include #include #include "dmaengine.h" diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 0722f869465c..b7907ba7448a 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -54,7 +54,7 @@ #include #include -#include +#include /** Defines ******************************************************************** *******************************************************************************/ diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c index 560a65aa7038..bbe70991d30b 100644 --- a/drivers/media/video/mx1_camera.c +++ b/drivers/media/video/mx1_camera.c @@ -44,7 +44,7 @@ #include #include #include -#include +#include /* * CSI registers diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c index ac175406e582..965427f279a5 100644 --- a/drivers/media/video/mx2_camera.c +++ b/drivers/media/video/mx2_camera.c @@ -40,7 +40,7 @@ #include -#include +#include #include #include diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c index af2297dd49c8..1481b0d419da 100644 --- a/drivers/media/video/mx3_camera.c +++ b/drivers/media/video/mx3_camera.c @@ -25,8 +25,8 @@ #include #include -#include -#include +#include +#include #define MX3_CAM_DRV_NAME "mx3-camera" diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 28ed52d58f7f..7b1161de01d6 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -38,9 +38,9 @@ #include #include #include -#include +#include -#include +#include #include #define DRIVER_NAME "mxc-mmc" diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index e23f8134591c..c4c504c4802b 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 6acc790c2fbb..5683604967d7 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -36,7 +36,7 @@ #include #include -#include +#include #include #define DRIVER_NAME "mxc_nand" diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index e834ff8c0188..63e7fc9801cd 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -39,7 +39,7 @@ #include #include -#include +#include #define DRIVER_NAME "spi_imx" diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index d5c689d6217e..fc65ba2c2d50 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -51,7 +51,7 @@ #include #include -#include +#include /* Register definitions */ #define URXD0 0x0 /* Receiver Register */ diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index dc5334856afe..a0eb85794fd4 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -35,7 +35,7 @@ #include #include -#include +#include #include #include "imx_udc.h" diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 34201372c85f..a6e2ea4ef8fd 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -25,7 +25,7 @@ #include #include -#include +#include #include diff --git a/drivers/usb/host/imx21-hcd.h b/drivers/usb/host/imx21-hcd.h index 87b29fd971b4..c005770a73e9 100644 --- a/drivers/usb/host/imx21-hcd.h +++ b/drivers/usb/host/imx21-hcd.h @@ -24,7 +24,7 @@ #ifndef __LINUX_IMX21_HCD_H__ #define __LINUX_IMX21_HCD_H__ -#include +#include #define NUM_ISO_ETDS 2 #define USB_NUM_ETD 32 diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index caad3689b4e6..53ffdfc82a75 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -32,7 +32,7 @@ #include #include -#include +#include #include /* diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index c89f8a8d36d2..d7381088a180 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -27,10 +27,10 @@ #include #include -#include +#include #include #include -#include +#include #include #include diff --git a/include/linux/platform_data/asoc-imx-ssi.h b/include/linux/platform_data/asoc-imx-ssi.h new file mode 100644 index 000000000000..63f3c2804239 --- /dev/null +++ b/include/linux/platform_data/asoc-imx-ssi.h @@ -0,0 +1,21 @@ +#ifndef __MACH_SSI_H +#define __MACH_SSI_H + +struct snd_ac97; + +extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end; +extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer; + +struct imx_ssi_platform_data { + unsigned int flags; +#define IMX_SSI_DMA (1 << 0) +#define IMX_SSI_USE_AC97 (1 << 1) +#define IMX_SSI_NET (1 << 2) +#define IMX_SSI_SYN (1 << 3) +#define IMX_SSI_USE_I2S_SLAVE (1 << 4) + void (*ac97_reset) (struct snd_ac97 *ac97); + void (*ac97_warm_reset)(struct snd_ac97 *ac97); +}; + +#endif /* __MACH_SSI_H */ + diff --git a/include/linux/platform_data/camera-mx1.h b/include/linux/platform_data/camera-mx1.h new file mode 100644 index 000000000000..4fd6c70314b4 --- /dev/null +++ b/include/linux/platform_data/camera-mx1.h @@ -0,0 +1,35 @@ +/* + * mx1_camera.h - i.MX1/i.MXL camera driver header file + * + * Copyright (c) 2008, Paulius Zaleckas + * Copyright (C) 2009, Darius Augulis + * + * Based on PXA camera.h file: + * Copyright (C) 2003, Intel Corporation + * Copyright (C) 2008, Guennadi Liakhovetski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_CAMERA_H_ +#define __ASM_ARCH_CAMERA_H_ + +#define MX1_CAMERA_DATA_HIGH 1 +#define MX1_CAMERA_PCLK_RISING 2 +#define MX1_CAMERA_VSYNC_HIGH 4 + +extern unsigned char mx1_camera_sof_fiq_start, mx1_camera_sof_fiq_end; + +/** + * struct mx1_camera_pdata - i.MX1/i.MXL camera platform data + * @mclk_10khz: master clock frequency in 10kHz units + * @flags: MX1 camera platform flags + */ +struct mx1_camera_pdata { + unsigned long mclk_10khz; + unsigned long flags; +}; + +#endif /* __ASM_ARCH_CAMERA_H_ */ diff --git a/include/linux/platform_data/camera-mx2.h b/include/linux/platform_data/camera-mx2.h new file mode 100644 index 000000000000..3c080a32dbf5 --- /dev/null +++ b/include/linux/platform_data/camera-mx2.h @@ -0,0 +1,46 @@ +/* + * mx2-cam.h - i.MX27/i.MX25 camera driver header file + * + * Copyright (C) 2003, Intel Corporation + * Copyright (C) 2008, Sascha Hauer + * Copyright (C) 2010, Baruch Siach + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __MACH_MX2_CAM_H_ +#define __MACH_MX2_CAM_H_ + +#define MX2_CAMERA_SWAP16 (1 << 0) +#define MX2_CAMERA_EXT_VSYNC (1 << 1) +#define MX2_CAMERA_CCIR (1 << 2) +#define MX2_CAMERA_CCIR_INTERLACE (1 << 3) +#define MX2_CAMERA_HSYNC_HIGH (1 << 4) +#define MX2_CAMERA_GATED_CLOCK (1 << 5) +#define MX2_CAMERA_INV_DATA (1 << 6) +#define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7) +#define MX2_CAMERA_PACK_DIR_MSB (1 << 8) + +/** + * struct mx2_camera_platform_data - optional platform data for mx2_camera + * @flags: any combination of MX2_CAMERA_* + * @clk: clock rate of the csi block / 2 + */ +struct mx2_camera_platform_data { + unsigned long flags; + unsigned long clk; +}; + +#endif /* __MACH_MX2_CAM_H_ */ diff --git a/include/linux/platform_data/camera-mx3.h b/include/linux/platform_data/camera-mx3.h new file mode 100644 index 000000000000..f226ee3777e1 --- /dev/null +++ b/include/linux/platform_data/camera-mx3.h @@ -0,0 +1,48 @@ +/* + * mx3_camera.h - i.MX3x camera driver header file + * + * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering, + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MX3_CAMERA_H_ +#define _MX3_CAMERA_H_ + +#include + +#define MX3_CAMERA_CLK_SRC 1 +#define MX3_CAMERA_EXT_VSYNC 2 +#define MX3_CAMERA_DP 4 +#define MX3_CAMERA_PCP 8 +#define MX3_CAMERA_HSP 0x10 +#define MX3_CAMERA_VSP 0x20 +#define MX3_CAMERA_DATAWIDTH_4 0x40 +#define MX3_CAMERA_DATAWIDTH_8 0x80 +#define MX3_CAMERA_DATAWIDTH_10 0x100 +#define MX3_CAMERA_DATAWIDTH_15 0x200 + +#define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \ + MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15) + +/** + * struct mx3_camera_pdata - i.MX3x camera platform data + * @flags: MX3_CAMERA_* flags + * @mclk_10khz: master clock frequency in 10kHz units + * @dma_dev: IPU DMA device to match against in channel allocation + */ +struct mx3_camera_pdata { + unsigned long flags; + unsigned long mclk_10khz; + struct device *dma_dev; +}; + +#endif diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h new file mode 100644 index 000000000000..3a3942823c20 --- /dev/null +++ b/include/linux/platform_data/dma-imx-sdma.h @@ -0,0 +1,59 @@ +#ifndef __MACH_MXC_SDMA_H__ +#define __MACH_MXC_SDMA_H__ + +/** + * struct sdma_script_start_addrs - SDMA script start pointers + * + * start addresses of the different functions in the physical + * address space of the SDMA engine. + */ +struct sdma_script_start_addrs { + s32 ap_2_ap_addr; + s32 ap_2_bp_addr; + s32 ap_2_ap_fixed_addr; + s32 bp_2_ap_addr; + s32 loopback_on_dsp_side_addr; + s32 mcu_interrupt_only_addr; + s32 firi_2_per_addr; + s32 firi_2_mcu_addr; + s32 per_2_firi_addr; + s32 mcu_2_firi_addr; + s32 uart_2_per_addr; + s32 uart_2_mcu_addr; + s32 per_2_app_addr; + s32 mcu_2_app_addr; + s32 per_2_per_addr; + s32 uartsh_2_per_addr; + s32 uartsh_2_mcu_addr; + s32 per_2_shp_addr; + s32 mcu_2_shp_addr; + s32 ata_2_mcu_addr; + s32 mcu_2_ata_addr; + s32 app_2_per_addr; + s32 app_2_mcu_addr; + s32 shp_2_per_addr; + s32 shp_2_mcu_addr; + s32 mshc_2_mcu_addr; + s32 mcu_2_mshc_addr; + s32 spdif_2_mcu_addr; + s32 mcu_2_spdif_addr; + s32 asrc_2_mcu_addr; + s32 ext_mem_2_ipu_addr; + s32 descrambler_addr; + s32 dptc_dvfs_addr; + s32 utra_addr; + s32 ram_code_start_addr; +}; + +/** + * struct sdma_platform_data - platform specific data for SDMA engine + * + * @fw_name The firmware name + * @script_addrs SDMA scripts addresses in SDMA ROM + */ +struct sdma_platform_data { + char *fw_name; + struct sdma_script_start_addrs *script_addrs; +}; + +#endif /* __MACH_MXC_SDMA_H__ */ diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h new file mode 100644 index 000000000000..1b9080385b46 --- /dev/null +++ b/include/linux/platform_data/dma-imx.h @@ -0,0 +1,67 @@ +/* + * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_DMA_H__ +#define __ASM_ARCH_MXC_DMA_H__ + +#include +#include +#include + +/* + * This enumerates peripheral types. Used for SDMA. + */ +enum sdma_peripheral_type { + IMX_DMATYPE_SSI, /* MCU domain SSI */ + IMX_DMATYPE_SSI_SP, /* Shared SSI */ + IMX_DMATYPE_MMC, /* MMC */ + IMX_DMATYPE_SDHC, /* SDHC */ + IMX_DMATYPE_UART, /* MCU domain UART */ + IMX_DMATYPE_UART_SP, /* Shared UART */ + IMX_DMATYPE_FIRI, /* FIRI */ + IMX_DMATYPE_CSPI, /* MCU domain CSPI */ + IMX_DMATYPE_CSPI_SP, /* Shared CSPI */ + IMX_DMATYPE_SIM, /* SIM */ + IMX_DMATYPE_ATA, /* ATA */ + IMX_DMATYPE_CCM, /* CCM */ + IMX_DMATYPE_EXT, /* External peripheral */ + IMX_DMATYPE_MSHC, /* Memory Stick Host Controller */ + IMX_DMATYPE_MSHC_SP, /* Shared Memory Stick Host Controller */ + IMX_DMATYPE_DSP, /* DSP */ + IMX_DMATYPE_MEMORY, /* Memory */ + IMX_DMATYPE_FIFO_MEMORY,/* FIFO type Memory */ + IMX_DMATYPE_SPDIF, /* SPDIF */ + IMX_DMATYPE_IPU_MEMORY, /* IPU Memory */ + IMX_DMATYPE_ASRC, /* ASRC */ + IMX_DMATYPE_ESAI, /* ESAI */ +}; + +enum imx_dma_prio { + DMA_PRIO_HIGH = 0, + DMA_PRIO_MEDIUM = 1, + DMA_PRIO_LOW = 2 +}; + +struct imx_dma_data { + int dma_request; /* DMA request line */ + enum sdma_peripheral_type peripheral_type; + int priority; +}; + +static inline int imx_dma_is_ipu(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "ipu-core"); +} + +static inline int imx_dma_is_general_purpose(struct dma_chan *chan) +{ + return strstr(dev_name(chan->device->dev), "sdma") || + !strcmp(dev_name(chan->device->dev), "imx-dma"); +} + +#endif diff --git a/include/linux/platform_data/i2c-imx.h b/include/linux/platform_data/i2c-imx.h new file mode 100644 index 000000000000..8289d915e615 --- /dev/null +++ b/include/linux/platform_data/i2c-imx.h @@ -0,0 +1,21 @@ +/* + * i2c.h - i.MX I2C driver header file + * + * Copyright (c) 2008, Darius Augulis + * + * This file is released under the GPLv2 + */ + +#ifndef __ASM_ARCH_I2C_H_ +#define __ASM_ARCH_I2C_H_ + +/** + * struct imxi2c_platform_data - structure of platform data for MXC I2C driver + * @bitrate: Bus speed measured in Hz + * + **/ +struct imxi2c_platform_data { + u32 bitrate; +}; + +#endif /* __ASM_ARCH_I2C_H_ */ diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h new file mode 100644 index 000000000000..aaf97481f413 --- /dev/null +++ b/include/linux/platform_data/mmc-esdhc-imx.h @@ -0,0 +1,43 @@ +/* + * Copyright 2010 Wolfram Sang + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#ifndef __ASM_ARCH_IMX_ESDHC_H +#define __ASM_ARCH_IMX_ESDHC_H + +enum wp_types { + ESDHC_WP_NONE, /* no WP, neither controller nor gpio */ + ESDHC_WP_CONTROLLER, /* mmc controller internal WP */ + ESDHC_WP_GPIO, /* external gpio pin for WP */ +}; + +enum cd_types { + ESDHC_CD_NONE, /* no CD, neither controller nor gpio */ + ESDHC_CD_CONTROLLER, /* mmc controller internal CD */ + ESDHC_CD_GPIO, /* external gpio pin for CD */ + ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */ +}; + +/** + * struct esdhc_platform_data - platform data for esdhc on i.MX + * + * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35. + * + * @wp_gpio: gpio for write_protect + * @cd_gpio: gpio for card_detect interrupt + * @wp_type: type of write_protect method (see wp_types enum above) + * @cd_type: type of card_detect method (see cd_types enum above) + */ + +struct esdhc_platform_data { + unsigned int wp_gpio; + unsigned int cd_gpio; + enum wp_types wp_type; + enum cd_types cd_type; +}; +#endif /* __ASM_ARCH_IMX_ESDHC_H */ diff --git a/include/linux/platform_data/mmc-mxcmmc.h b/include/linux/platform_data/mmc-mxcmmc.h new file mode 100644 index 000000000000..29115f405af9 --- /dev/null +++ b/include/linux/platform_data/mmc-mxcmmc.h @@ -0,0 +1,39 @@ +#ifndef ASMARM_ARCH_MMC_H +#define ASMARM_ARCH_MMC_H + +#include + +struct device; + +/* board specific SDHC data, optional. + * If not present, a writable card with 3,3V is assumed. + */ +struct imxmmc_platform_data { + /* Return values for the get_ro callback should be: + * 0 for a read/write card + * 1 for a read-only card + * -ENOSYS when not supported (equal to NULL callback) + * or a negative errno value when something bad happened + */ + int (*get_ro)(struct device *); + + /* board specific hook to (de)initialize the SD slot. + * The board code can call 'handler' on a card detection + * change giving data as argument. + */ + int (*init)(struct device *dev, irq_handler_t handler, void *data); + void (*exit)(struct device *dev, void *data); + + /* available voltages. If not given, assume + * MMC_VDD_32_33 | MMC_VDD_33_34 + */ + unsigned int ocr_avail; + + /* adjust slot voltage */ + void (*setpower)(struct device *, unsigned int vdd); + + /* enable card detect using DAT3 */ + int dat3_card_detect; +}; + +#endif diff --git a/include/linux/platform_data/mtd-mxc_nand.h b/include/linux/platform_data/mtd-mxc_nand.h new file mode 100644 index 000000000000..6bb96ef1600b --- /dev/null +++ b/include/linux/platform_data/mtd-mxc_nand.h @@ -0,0 +1,32 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Sascha Hauer, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_NAND_H +#define __ASM_ARCH_NAND_H + +#include + +struct mxc_nand_platform_data { + unsigned int width; /* data bus width in bytes */ + unsigned int hw_ecc:1; /* 0 if suppress hardware ECC */ + unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */ + struct mtd_partition *parts; /* partition table */ + int nr_parts; /* size of parts */ +}; +#endif /* __ASM_ARCH_NAND_H */ diff --git a/include/linux/platform_data/serial-imx.h b/include/linux/platform_data/serial-imx.h new file mode 100644 index 000000000000..4adec9b154dd --- /dev/null +++ b/include/linux/platform_data/serial-imx.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2008 by Sascha Hauer + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef ASMARM_ARCH_UART_H +#define ASMARM_ARCH_UART_H + +#define IMXUART_HAVE_RTSCTS (1<<0) +#define IMXUART_IRDA (1<<1) + +struct imxuart_platform_data { + int (*init)(struct platform_device *pdev); + void (*exit)(struct platform_device *pdev); + unsigned int flags; + void (*irda_enable)(int enable); + unsigned int irda_inv_rx:1; + unsigned int irda_inv_tx:1; + unsigned short transceiver_delay; +}; + +#endif diff --git a/include/linux/platform_data/spi-imx.h b/include/linux/platform_data/spi-imx.h new file mode 100644 index 000000000000..08be445e8eb8 --- /dev/null +++ b/include/linux/platform_data/spi-imx.h @@ -0,0 +1,27 @@ + +#ifndef __MACH_SPI_H_ +#define __MACH_SPI_H_ + +/* + * struct spi_imx_master - device.platform_data for SPI controller devices. + * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio + * pins, numbers < 0 mean internal CSPI chipselects according + * to MXC_SPI_CS(). Normally you want to use gpio based chip + * selects as the CSPI module tries to be intelligent about + * when to assert the chipselect: The CSPI module deasserts the + * chipselect once it runs out of input data. The other problem + * is that it is not possible to mix between high active and low + * active chipselects on one single bus using the internal + * chipselects. Unfortunately Freescale decided to put some + * chipselects on dedicated pins which are not usable as gpios, + * so we have to support the internal chipselects. + * @num_chipselect: ARRAY_SIZE(chipselect) + */ +struct spi_imx_master { + int *chipselect; + int num_chipselect; +}; + +#define MXC_SPI_CS(no) ((no) - 32) + +#endif /* __MACH_SPI_H_*/ diff --git a/include/linux/platform_data/usb-ehci-mxc.h b/include/linux/platform_data/usb-ehci-mxc.h new file mode 100644 index 000000000000..7eb9d1329671 --- /dev/null +++ b/include/linux/platform_data/usb-ehci-mxc.h @@ -0,0 +1,59 @@ +#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H +#define __INCLUDE_ASM_ARCH_MXC_EHCI_H + +/* values for portsc field */ +#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23) +#define MXC_EHCI_FORCE_FS (1 << 24) +#define MXC_EHCI_UTMI_8BIT (0 << 28) +#define MXC_EHCI_UTMI_16BIT (1 << 28) +#define MXC_EHCI_SERIAL (1 << 29) +#define MXC_EHCI_MODE_UTMI (0 << 30) +#define MXC_EHCI_MODE_PHILIPS (1 << 30) +#define MXC_EHCI_MODE_ULPI (2 << 30) +#define MXC_EHCI_MODE_SERIAL (3 << 30) + +/* values for flags field */ +#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0) +#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0) +#define MXC_EHCI_INTERFACE_MASK (0xf) + +#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) +#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6) +#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7) +#define MXC_EHCI_TTL_ENABLED (1 << 8) + +#define MXC_EHCI_INTERNAL_PHY (1 << 9) +#define MXC_EHCI_IPPUE_DOWN (1 << 10) +#define MXC_EHCI_IPPUE_UP (1 << 11) +#define MXC_EHCI_WAKEUP_ENABLED (1 << 12) +#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13) + +#define MXC_USBCTRL_OFFSET 0 +#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8 +#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc +#define MXC_USBH2CTRL_OFFSET 0x14 + +#define MX5_USBOTHER_REGS_OFFSET 0x800 + +/* USB_PHY_CTRL_FUNC2*/ +#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3 +#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT 0 + +struct mxc_usbh_platform_data { + int (*init)(struct platform_device *pdev); + int (*exit)(struct platform_device *pdev); + + unsigned int portsc; + struct usb_phy *otg; +}; + +int mx51_initialize_usb_hw(int port, unsigned int flags); +int mx25_initialize_usb_hw(int port, unsigned int flags); +int mx31_initialize_usb_hw(int port, unsigned int flags); +int mx35_initialize_usb_hw(int port, unsigned int flags); +int mx27_initialize_usb_hw(int port, unsigned int flags); + +#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */ + diff --git a/include/linux/platform_data/usb-imx_udc.h b/include/linux/platform_data/usb-imx_udc.h new file mode 100644 index 000000000000..be273371f34a --- /dev/null +++ b/include/linux/platform_data/usb-imx_udc.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2008 Darius Augulis + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_MXC_USB +#define __ASM_ARCH_MXC_USB + +struct imxusb_platform_data { + int (*init)(struct device *); + void (*exit)(struct device *); +}; + +#endif /* __ASM_ARCH_MXC_USB */ diff --git a/include/linux/platform_data/usb-mx2.h b/include/linux/platform_data/usb-mx2.h new file mode 100644 index 000000000000..22d0b596262c --- /dev/null +++ b/include/linux/platform_data/usb-mx2.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2009 Martin Fuzzey + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_MX21_USBH +#define __ASM_ARCH_MX21_USBH + +enum mx21_usbh_xcvr { + /* Values below as used by hardware (HWMODE register) */ + MX21_USBXCVR_TXDIF_RXDIF = 0, + MX21_USBXCVR_TXDIF_RXSE = 1, + MX21_USBXCVR_TXSE_RXDIF = 2, + MX21_USBXCVR_TXSE_RXSE = 3, +}; + +struct mx21_usbh_platform_data { + enum mx21_usbh_xcvr host_xcvr; /* tranceiver mode host 1,2 ports */ + enum mx21_usbh_xcvr otg_xcvr; /* tranceiver mode otg (as host) port */ + u16 enable_host1:1, + enable_host2:1, + enable_otg_host:1, /* enable "OTG" port (as host) */ + host1_xcverless:1, /* traceiverless host1 port */ + host1_txenoe:1, /* output enable host1 transmit enable */ + otg_ext_xcvr:1, /* external tranceiver for OTG port */ + unused:10; +}; + +#endif /* __ASM_ARCH_MX21_USBH */ diff --git a/include/linux/platform_data/video-imxfb.h b/include/linux/platform_data/video-imxfb.h new file mode 100644 index 000000000000..9de8f062ad5d --- /dev/null +++ b/include/linux/platform_data/video-imxfb.h @@ -0,0 +1,84 @@ +/* + * This structure describes the machine which we are running on. + */ +#ifndef __MACH_IMXFB_H__ +#define __MACH_IMXFB_H__ + +#include + +#define PCR_TFT (1 << 31) +#define PCR_COLOR (1 << 30) +#define PCR_PBSIZ_1 (0 << 28) +#define PCR_PBSIZ_2 (1 << 28) +#define PCR_PBSIZ_4 (2 << 28) +#define PCR_PBSIZ_8 (3 << 28) +#define PCR_BPIX_1 (0 << 25) +#define PCR_BPIX_2 (1 << 25) +#define PCR_BPIX_4 (2 << 25) +#define PCR_BPIX_8 (3 << 25) +#define PCR_BPIX_12 (4 << 25) +#define PCR_BPIX_16 (5 << 25) +#define PCR_BPIX_18 (6 << 25) +#define PCR_PIXPOL (1 << 24) +#define PCR_FLMPOL (1 << 23) +#define PCR_LPPOL (1 << 22) +#define PCR_CLKPOL (1 << 21) +#define PCR_OEPOL (1 << 20) +#define PCR_SCLKIDLE (1 << 19) +#define PCR_END_SEL (1 << 18) +#define PCR_END_BYTE_SWAP (1 << 17) +#define PCR_REV_VS (1 << 16) +#define PCR_ACD_SEL (1 << 15) +#define PCR_ACD(x) (((x) & 0x7f) << 8) +#define PCR_SCLK_SEL (1 << 7) +#define PCR_SHARP (1 << 6) +#define PCR_PCD(x) ((x) & 0x3f) + +#define PWMR_CLS(x) (((x) & 0x1ff) << 16) +#define PWMR_LDMSK (1 << 15) +#define PWMR_SCR1 (1 << 10) +#define PWMR_SCR0 (1 << 9) +#define PWMR_CC_EN (1 << 8) +#define PWMR_PW(x) ((x) & 0xff) + +#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26) +#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16) +#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8) +#define LSCR1_GRAY2(x) (((x) & 0xf) << 4) +#define LSCR1_GRAY1(x) (((x) & 0xf)) + +#define DMACR_BURST (1 << 31) +#define DMACR_HM(x) (((x) & 0xf) << 16) +#define DMACR_TM(x) ((x) & 0xf) + +struct imx_fb_videomode { + struct fb_videomode mode; + u32 pcr; + unsigned char bpp; +}; + +struct imx_fb_platform_data { + struct imx_fb_videomode *mode; + int num_modes; + + u_int cmap_greyscale:1, + cmap_inverse:1, + cmap_static:1, + unused:29; + + u_int pwmr; + u_int lscr1; + u_int dmacr; + + u_char * fixed_screen_cpu; + dma_addr_t fixed_screen_dma; + + int (*init)(struct platform_device *); + void (*exit)(struct platform_device *); + + void (*lcd_power)(int); + void (*backlight_power)(int); +}; + +void set_imx_fb_info(struct imx_fb_platform_data *); +#endif /* ifndef __MACH_IMXFB_H__ */ diff --git a/include/linux/platform_data/video-mx3fb.h b/include/linux/platform_data/video-mx3fb.h new file mode 100644 index 000000000000..fdbe60001542 --- /dev/null +++ b/include/linux/platform_data/video-mx3fb.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MX3FB_H__ +#define __ASM_ARCH_MX3FB_H__ + +#include +#include + +/* Proprietary FB_SYNC_ flags */ +#define FB_SYNC_OE_ACT_HIGH 0x80000000 +#define FB_SYNC_CLK_INVERT 0x40000000 +#define FB_SYNC_DATA_INVERT 0x20000000 +#define FB_SYNC_CLK_IDLE_EN 0x10000000 +#define FB_SYNC_SHARP_MODE 0x08000000 +#define FB_SYNC_SWAP_RGB 0x04000000 +#define FB_SYNC_CLK_SEL_EN 0x02000000 + +/* + * Specify the way your display is connected. The IPU can arbitrarily + * map the internal colors to the external data lines. We only support + * the following mappings at the moment. + */ +enum disp_data_mapping { + /* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */ + IPU_DISP_DATA_MAPPING_RGB666, + /* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */ + IPU_DISP_DATA_MAPPING_RGB565, + /* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */ + IPU_DISP_DATA_MAPPING_RGB888, +}; + +/** + * struct mx3fb_platform_data - mx3fb platform data + * + * @dma_dev: pointer to the dma-device, used for dma-slave connection + * @mode: pointer to a platform-provided per mxc_register_fb() videomode + */ +struct mx3fb_platform_data { + struct device *dma_dev; + const char *name; + const struct fb_videomode *mode; + int num_modes; + enum disp_data_mapping disp_data_fmt; +}; + +#endif diff --git a/sound/soc/fsl/imx-pcm-dma.c b/sound/soc/fsl/imx-pcm-dma.c index 48f9d886f020..89a7755b6f56 100644 --- a/sound/soc/fsl/imx-pcm-dma.c +++ b/sound/soc/fsl/imx-pcm-dma.c @@ -30,7 +30,7 @@ #include #include -#include +#include #include "imx-pcm.h" diff --git a/sound/soc/fsl/imx-pcm-fiq.c b/sound/soc/fsl/imx-pcm-fiq.c index ee27ba3933bd..22c6130957ba 100644 --- a/sound/soc/fsl/imx-pcm-fiq.c +++ b/sound/soc/fsl/imx-pcm-fiq.c @@ -30,7 +30,7 @@ #include #include -#include +#include #include "imx-ssi.h" diff --git a/sound/soc/fsl/imx-ssi.c b/sound/soc/fsl/imx-ssi.c index 81d7728cf67f..e6a17baca1ee 100644 --- a/sound/soc/fsl/imx-ssi.c +++ b/sound/soc/fsl/imx-ssi.c @@ -47,7 +47,7 @@ #include #include -#include +#include #include #include "imx-ssi.h" diff --git a/sound/soc/fsl/imx-ssi.h b/sound/soc/fsl/imx-ssi.h index 5744e86ca878..dc114bdedce5 100644 --- a/sound/soc/fsl/imx-ssi.h +++ b/sound/soc/fsl/imx-ssi.h @@ -186,7 +186,7 @@ #define DRV_NAME "imx-ssi" #include -#include +#include #include "imx-pcm.h" struct imx_ssi { -- cgit v1.2.3 From 1ef21f6343ff08309955d1ad56ad0f5504a4dd94 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 24 Aug 2012 15:14:41 +0200 Subject: ARM: msm: move platform_data definitions Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the msm include directories Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Acked-by: Greg Kroah-Hartman Acked-by: Nicolas Pitre Acked-by: David Brown Cc: Daniel Walker Cc: Bryan Huntsman Cc: Chris Ball Cc: Florian Tobias Schandinat Cc: linux-arm-msm@vger.kernel.org --- arch/arm/mach-msm/board-qsd8x50.c | 2 +- arch/arm/mach-msm/board-trout-mmc.c | 2 +- arch/arm/mach-msm/board-trout-panel.c | 2 +- arch/arm/mach-msm/devices-msm7x00.c | 2 +- arch/arm/mach-msm/devices-msm7x30.c | 2 +- arch/arm/mach-msm/devices-qsd8x50.c | 2 +- arch/arm/mach-msm/include/mach/board.h | 2 +- arch/arm/mach-msm/include/mach/mmc.h | 30 ------ arch/arm/mach-msm/include/mach/msm_fb.h | 147 ----------------------------- drivers/mmc/host/msm_sdcc.c | 2 +- drivers/video/msm/mddi.c | 2 +- drivers/video/msm/mddi_client_dummy.c | 2 +- drivers/video/msm/mddi_client_nt35399.c | 2 +- drivers/video/msm/mddi_client_toshiba.c | 2 +- drivers/video/msm/mdp.c | 2 +- drivers/video/msm/mdp_hw.h | 2 +- drivers/video/msm/mdp_ppp.c | 2 +- drivers/video/msm/msm_fb.c | 2 +- include/linux/platform_data/mmc-msm_sdcc.h | 30 ++++++ include/linux/platform_data/video-msm_fb.h | 147 +++++++++++++++++++++++++++++ 20 files changed, 193 insertions(+), 193 deletions(-) delete mode 100644 arch/arm/mach-msm/include/mach/mmc.h delete mode 100644 arch/arm/mach-msm/include/mach/msm_fb.h create mode 100644 include/linux/platform_data/mmc-msm_sdcc.h create mode 100644 include/linux/platform_data/video-msm_fb.h (limited to 'include/linux') diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index c8fe0edb9761..b21bb4cfc642 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -32,7 +32,7 @@ #include #include #include -#include +#include #include "devices.h" diff --git a/arch/arm/mach-msm/board-trout-mmc.c b/arch/arm/mach-msm/board-trout-mmc.c index 8650342b7493..3723e55819d6 100644 --- a/arch/arm/mach-msm/board-trout-mmc.c +++ b/arch/arm/mach-msm/board-trout-mmc.c @@ -15,7 +15,7 @@ #include -#include +#include #include "devices.h" diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c index 89bf6b426699..f9a5db6d2ced 100644 --- a/arch/arm/mach-msm/board-trout-panel.c +++ b/arch/arm/mach-msm/board-trout-panel.c @@ -14,7 +14,7 @@ #include #include -#include +#include #include #include "board-trout.h" diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c index 993780f490ad..f66ee6ea8720 100644 --- a/arch/arm/mach-msm/devices-msm7x00.c +++ b/arch/arm/mach-msm/devices-msm7x00.c @@ -27,7 +27,7 @@ #include "clock.h" #include "clock-pcom.h" -#include +#include static struct resource resources_uart1[] = { { diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c index 09b4f1403824..e90ab5938c5f 100644 --- a/arch/arm/mach-msm/devices-msm7x30.c +++ b/arch/arm/mach-msm/devices-msm7x30.c @@ -31,7 +31,7 @@ #include "clock-pcom.h" #include "clock-7x30.h" -#include +#include static struct resource resources_uart2[] = { { diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c index 131633b12a34..4db61d5fe317 100644 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ b/arch/arm/mach-msm/devices-qsd8x50.c @@ -27,7 +27,7 @@ #include -#include +#include #include "clock-pcom.h" static struct resource resources_uart3[] = { diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h index 435f8edfafd1..70e0f98ecdb9 100644 --- a/arch/arm/mach-msm/include/mach/board.h +++ b/arch/arm/mach-msm/include/mach/board.h @@ -18,7 +18,7 @@ #define __ASM_ARCH_MSM_BOARD_H #include -#include +#include /* platform device data structures */ diff --git a/arch/arm/mach-msm/include/mach/mmc.h b/arch/arm/mach-msm/include/mach/mmc.h deleted file mode 100644 index ffcd9e3a6a7e..000000000000 --- a/arch/arm/mach-msm/include/mach/mmc.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * arch/arm/include/asm/mach/mmc.h - */ -#ifndef ASMARM_MACH_MMC_H -#define ASMARM_MACH_MMC_H - -#include -#include -#include - -struct msm_mmc_gpio { - unsigned no; - const char *name; -}; - -struct msm_mmc_gpio_data { - struct msm_mmc_gpio *gpio; - u8 size; -}; - -struct msm_mmc_platform_data { - unsigned int ocr_mask; /* available voltages */ - u32 (*translate_vdd)(struct device *, unsigned int); - unsigned int (*status)(struct device *); - int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id); - struct msm_mmc_gpio_data *gpio_data; - void (*init_card)(struct mmc_card *card); -}; - -#endif diff --git a/arch/arm/mach-msm/include/mach/msm_fb.h b/arch/arm/mach-msm/include/mach/msm_fb.h deleted file mode 100644 index 1f4fc81b3d8f..000000000000 --- a/arch/arm/mach-msm/include/mach/msm_fb.h +++ /dev/null @@ -1,147 +0,0 @@ -/* arch/arm/mach-msm/include/mach/msm_fb.h - * - * Internal shared definitions for various MSM framebuffer parts. - * - * Copyright (C) 2007 Google Incorporated - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _MSM_FB_H_ -#define _MSM_FB_H_ - -#include - -struct mddi_info; - -struct msm_fb_data { - int xres; /* x resolution in pixels */ - int yres; /* y resolution in pixels */ - int width; /* disply width in mm */ - int height; /* display height in mm */ - unsigned output_format; -}; - -struct msmfb_callback { - void (*func)(struct msmfb_callback *); -}; - -enum { - MSM_MDDI_PMDH_INTERFACE, - MSM_MDDI_EMDH_INTERFACE, - MSM_EBI2_INTERFACE, -}; - -#define MSMFB_CAP_PARTIAL_UPDATES (1 << 0) - -struct msm_panel_data { - /* turns off the fb memory */ - int (*suspend)(struct msm_panel_data *); - /* turns on the fb memory */ - int (*resume)(struct msm_panel_data *); - /* turns off the panel */ - int (*blank)(struct msm_panel_data *); - /* turns on the panel */ - int (*unblank)(struct msm_panel_data *); - void (*wait_vsync)(struct msm_panel_data *); - void (*request_vsync)(struct msm_panel_data *, struct msmfb_callback *); - void (*clear_vsync)(struct msm_panel_data *); - /* from the enum above */ - unsigned interface_type; - /* data to be passed to the fb driver */ - struct msm_fb_data *fb_data; - - /* capabilities supported by the panel */ - uint32_t caps; -}; - -struct msm_mddi_client_data { - void (*suspend)(struct msm_mddi_client_data *); - void (*resume)(struct msm_mddi_client_data *); - void (*activate_link)(struct msm_mddi_client_data *); - void (*remote_write)(struct msm_mddi_client_data *, uint32_t val, - uint32_t reg); - uint32_t (*remote_read)(struct msm_mddi_client_data *, uint32_t reg); - void (*auto_hibernate)(struct msm_mddi_client_data *, int); - /* custom data that needs to be passed from the board file to a - * particular client */ - void *private_client_data; - struct resource *fb_resource; - /* from the list above */ - unsigned interface_type; -}; - -struct msm_mddi_platform_data { - unsigned int clk_rate; - void (*power_client)(struct msm_mddi_client_data *, int on); - - /* fixup the mfr name, product id */ - void (*fixup)(uint16_t *mfr_name, uint16_t *product_id); - - struct resource *fb_resource; /*optional*/ - /* number of clients in the list that follows */ - int num_clients; - /* array of client information of clients */ - struct { - unsigned product_id; /* mfr id in top 16 bits, product id - * in lower 16 bits - */ - char *name; /* the device name will be the platform - * device name registered for the client, - * it should match the name of the associated - * driver - */ - unsigned id; /* id for mddi client device node, will also - * be used as device id of panel devices, if - * the client device will have multiple panels - * space must be left here for them - */ - void *client_data; /* required private client data */ - unsigned int clk_rate; /* optional: if the client requires a - * different mddi clk rate - */ - } client_platform_data[]; -}; - -struct mdp_blit_req; -struct fb_info; -struct mdp_device { - struct device dev; - void (*dma)(struct mdp_device *mpd, uint32_t addr, - uint32_t stride, uint32_t w, uint32_t h, uint32_t x, - uint32_t y, struct msmfb_callback *callback, int interface); - void (*dma_wait)(struct mdp_device *mdp); - int (*blit)(struct mdp_device *mdp, struct fb_info *fb, - struct mdp_blit_req *req); - void (*set_grp_disp)(struct mdp_device *mdp, uint32_t disp_id); -}; - -struct class_interface; -int register_mdp_client(struct class_interface *class_intf); - -/**** private client data structs go below this line ***/ - -struct msm_mddi_bridge_platform_data { - /* from board file */ - int (*init)(struct msm_mddi_bridge_platform_data *, - struct msm_mddi_client_data *); - int (*uninit)(struct msm_mddi_bridge_platform_data *, - struct msm_mddi_client_data *); - /* passed to panel for use by the fb driver */ - int (*blank)(struct msm_mddi_bridge_platform_data *, - struct msm_mddi_client_data *); - int (*unblank)(struct msm_mddi_bridge_platform_data *, - struct msm_mddi_client_data *); - struct msm_fb_data fb_data; -}; - - - -#endif diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c index 1d14cda95e56..7c0af0e80047 100644 --- a/drivers/mmc/host/msm_sdcc.c +++ b/drivers/mmc/host/msm_sdcc.c @@ -42,7 +42,7 @@ #include #include -#include +#include #include #include #include diff --git a/drivers/video/msm/mddi.c b/drivers/video/msm/mddi.c index b061d709bc44..bf73f0480061 100644 --- a/drivers/video/msm/mddi.c +++ b/drivers/video/msm/mddi.c @@ -29,7 +29,7 @@ #include #include #include -#include +#include #include "mddi_hw.h" #define FLAG_DISABLE_HIBERNATION 0x0001 diff --git a/drivers/video/msm/mddi_client_dummy.c b/drivers/video/msm/mddi_client_dummy.c index d2a091cebe2c..f1b0dfcc9717 100644 --- a/drivers/video/msm/mddi_client_dummy.c +++ b/drivers/video/msm/mddi_client_dummy.c @@ -20,7 +20,7 @@ #include #include -#include +#include struct panel_info { struct platform_device pdev; diff --git a/drivers/video/msm/mddi_client_nt35399.c b/drivers/video/msm/mddi_client_nt35399.c index 7fcd67e132bf..d7a5bf84fb2a 100644 --- a/drivers/video/msm/mddi_client_nt35399.c +++ b/drivers/video/msm/mddi_client_nt35399.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include static DECLARE_WAIT_QUEUE_HEAD(nt35399_vsync_wait); diff --git a/drivers/video/msm/mddi_client_toshiba.c b/drivers/video/msm/mddi_client_toshiba.c index 053eb6877330..061d7dfebbf3 100644 --- a/drivers/video/msm/mddi_client_toshiba.c +++ b/drivers/video/msm/mddi_client_toshiba.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #define LCD_CONTROL_BLOCK_BASE 0x110000 diff --git a/drivers/video/msm/mdp.c b/drivers/video/msm/mdp.c index cb2ddf164c98..d1f881e8030e 100644 --- a/drivers/video/msm/mdp.c +++ b/drivers/video/msm/mdp.c @@ -26,7 +26,7 @@ #include #include -#include +#include #include #include diff --git a/drivers/video/msm/mdp_hw.h b/drivers/video/msm/mdp_hw.h index d80477415caa..a0bacf581b32 100644 --- a/drivers/video/msm/mdp_hw.h +++ b/drivers/video/msm/mdp_hw.h @@ -16,7 +16,7 @@ #define _MDP_HW_H_ #include -#include +#include struct mdp_info { struct mdp_device mdp_dev; diff --git a/drivers/video/msm/mdp_ppp.c b/drivers/video/msm/mdp_ppp.c index 2b6564e8bfea..be6079cdfbb6 100644 --- a/drivers/video/msm/mdp_ppp.c +++ b/drivers/video/msm/mdp_ppp.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include "mdp_hw.h" #include "mdp_scale_tables.h" diff --git a/drivers/video/msm/msm_fb.c b/drivers/video/msm/msm_fb.c index c6e3b4fcdd68..ec08a9ec377d 100644 --- a/drivers/video/msm/msm_fb.c +++ b/drivers/video/msm/msm_fb.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/include/linux/platform_data/mmc-msm_sdcc.h b/include/linux/platform_data/mmc-msm_sdcc.h new file mode 100644 index 000000000000..ffcd9e3a6a7e --- /dev/null +++ b/include/linux/platform_data/mmc-msm_sdcc.h @@ -0,0 +1,30 @@ +/* + * arch/arm/include/asm/mach/mmc.h + */ +#ifndef ASMARM_MACH_MMC_H +#define ASMARM_MACH_MMC_H + +#include +#include +#include + +struct msm_mmc_gpio { + unsigned no; + const char *name; +}; + +struct msm_mmc_gpio_data { + struct msm_mmc_gpio *gpio; + u8 size; +}; + +struct msm_mmc_platform_data { + unsigned int ocr_mask; /* available voltages */ + u32 (*translate_vdd)(struct device *, unsigned int); + unsigned int (*status)(struct device *); + int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id); + struct msm_mmc_gpio_data *gpio_data; + void (*init_card)(struct mmc_card *card); +}; + +#endif diff --git a/include/linux/platform_data/video-msm_fb.h b/include/linux/platform_data/video-msm_fb.h new file mode 100644 index 000000000000..1f4fc81b3d8f --- /dev/null +++ b/include/linux/platform_data/video-msm_fb.h @@ -0,0 +1,147 @@ +/* arch/arm/mach-msm/include/mach/msm_fb.h + * + * Internal shared definitions for various MSM framebuffer parts. + * + * Copyright (C) 2007 Google Incorporated + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MSM_FB_H_ +#define _MSM_FB_H_ + +#include + +struct mddi_info; + +struct msm_fb_data { + int xres; /* x resolution in pixels */ + int yres; /* y resolution in pixels */ + int width; /* disply width in mm */ + int height; /* display height in mm */ + unsigned output_format; +}; + +struct msmfb_callback { + void (*func)(struct msmfb_callback *); +}; + +enum { + MSM_MDDI_PMDH_INTERFACE, + MSM_MDDI_EMDH_INTERFACE, + MSM_EBI2_INTERFACE, +}; + +#define MSMFB_CAP_PARTIAL_UPDATES (1 << 0) + +struct msm_panel_data { + /* turns off the fb memory */ + int (*suspend)(struct msm_panel_data *); + /* turns on the fb memory */ + int (*resume)(struct msm_panel_data *); + /* turns off the panel */ + int (*blank)(struct msm_panel_data *); + /* turns on the panel */ + int (*unblank)(struct msm_panel_data *); + void (*wait_vsync)(struct msm_panel_data *); + void (*request_vsync)(struct msm_panel_data *, struct msmfb_callback *); + void (*clear_vsync)(struct msm_panel_data *); + /* from the enum above */ + unsigned interface_type; + /* data to be passed to the fb driver */ + struct msm_fb_data *fb_data; + + /* capabilities supported by the panel */ + uint32_t caps; +}; + +struct msm_mddi_client_data { + void (*suspend)(struct msm_mddi_client_data *); + void (*resume)(struct msm_mddi_client_data *); + void (*activate_link)(struct msm_mddi_client_data *); + void (*remote_write)(struct msm_mddi_client_data *, uint32_t val, + uint32_t reg); + uint32_t (*remote_read)(struct msm_mddi_client_data *, uint32_t reg); + void (*auto_hibernate)(struct msm_mddi_client_data *, int); + /* custom data that needs to be passed from the board file to a + * particular client */ + void *private_client_data; + struct resource *fb_resource; + /* from the list above */ + unsigned interface_type; +}; + +struct msm_mddi_platform_data { + unsigned int clk_rate; + void (*power_client)(struct msm_mddi_client_data *, int on); + + /* fixup the mfr name, product id */ + void (*fixup)(uint16_t *mfr_name, uint16_t *product_id); + + struct resource *fb_resource; /*optional*/ + /* number of clients in the list that follows */ + int num_clients; + /* array of client information of clients */ + struct { + unsigned product_id; /* mfr id in top 16 bits, product id + * in lower 16 bits + */ + char *name; /* the device name will be the platform + * device name registered for the client, + * it should match the name of the associated + * driver + */ + unsigned id; /* id for mddi client device node, will also + * be used as device id of panel devices, if + * the client device will have multiple panels + * space must be left here for them + */ + void *client_data; /* required private client data */ + unsigned int clk_rate; /* optional: if the client requires a + * different mddi clk rate + */ + } client_platform_data[]; +}; + +struct mdp_blit_req; +struct fb_info; +struct mdp_device { + struct device dev; + void (*dma)(struct mdp_device *mpd, uint32_t addr, + uint32_t stride, uint32_t w, uint32_t h, uint32_t x, + uint32_t y, struct msmfb_callback *callback, int interface); + void (*dma_wait)(struct mdp_device *mdp); + int (*blit)(struct mdp_device *mdp, struct fb_info *fb, + struct mdp_blit_req *req); + void (*set_grp_disp)(struct mdp_device *mdp, uint32_t disp_id); +}; + +struct class_interface; +int register_mdp_client(struct class_interface *class_intf); + +/**** private client data structs go below this line ***/ + +struct msm_mddi_bridge_platform_data { + /* from board file */ + int (*init)(struct msm_mddi_bridge_platform_data *, + struct msm_mddi_client_data *); + int (*uninit)(struct msm_mddi_bridge_platform_data *, + struct msm_mddi_client_data *); + /* passed to panel for use by the fb driver */ + int (*blank)(struct msm_mddi_bridge_platform_data *, + struct msm_mddi_client_data *); + int (*unblank)(struct msm_mddi_bridge_platform_data *, + struct msm_mddi_client_data *); + struct msm_fb_data fb_data; +}; + + + +#endif -- cgit v1.2.3 From 2960ed3468773b1a0b2533dd7a562673cc799437 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 24 Aug 2012 15:15:15 +0200 Subject: ARM: netx: move platform_data definitions Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the netx include directories Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Acked-by: Greg Kroah-Hartman Acked-by: Nicolas Pitre Acked-by: Sascha Hauer Cc: "David S. Miller" Cc: netdev@vger.kernel.org --- arch/arm/mach-netx/include/mach/eth.h | 27 --------------------------- arch/arm/mach-netx/nxdb500.c | 2 +- arch/arm/mach-netx/nxdkn.c | 2 +- arch/arm/mach-netx/nxeb500hmi.c | 2 +- drivers/net/ethernet/netx-eth.c | 2 +- include/linux/platform_data/eth-netx.h | 27 +++++++++++++++++++++++++++ 6 files changed, 31 insertions(+), 31 deletions(-) delete mode 100644 arch/arm/mach-netx/include/mach/eth.h create mode 100644 include/linux/platform_data/eth-netx.h (limited to 'include/linux') diff --git a/arch/arm/mach-netx/include/mach/eth.h b/arch/arm/mach-netx/include/mach/eth.h deleted file mode 100644 index 88af1ac28ead..000000000000 --- a/arch/arm/mach-netx/include/mach/eth.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-netx/include/mach/eth.h - * - * Copyright (c) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef ASMARM_ARCH_ETH_H -#define ASMARM_ARCH_ETH_H - -struct netxeth_platform_data { - unsigned int xcno; /* number of xmac/xpec engine this eth uses */ -}; - -#endif diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c index 180ea899a48a..8b781ff7c9e9 100644 --- a/arch/arm/mach-netx/nxdb500.c +++ b/arch/arm/mach-netx/nxdb500.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include #include "generic.h" #include "fb.h" diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c index 58009e29b20e..b26dbce334f2 100644 --- a/arch/arm/mach-netx/nxdkn.c +++ b/arch/arm/mach-netx/nxdkn.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include #include "generic.h" diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c index 122e99826ef6..257382efafa0 100644 --- a/arch/arm/mach-netx/nxeb500hmi.c +++ b/arch/arm/mach-netx/nxeb500hmi.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include #include "generic.h" #include "fb.h" diff --git a/drivers/net/ethernet/netx-eth.c b/drivers/net/ethernet/netx-eth.c index 9d11ab7521bc..63e7af44366f 100644 --- a/drivers/net/ethernet/netx-eth.c +++ b/drivers/net/ethernet/netx-eth.c @@ -34,7 +34,7 @@ #include #include #include -#include +#include /* XC Fifo Offsets */ #define EMPTY_PTR_FIFO(xcno) (0 + ((xcno) << 3)) /* Index of the empty pointer FIFO */ diff --git a/include/linux/platform_data/eth-netx.h b/include/linux/platform_data/eth-netx.h new file mode 100644 index 000000000000..88af1ac28ead --- /dev/null +++ b/include/linux/platform_data/eth-netx.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-netx/include/mach/eth.h + * + * Copyright (c) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef ASMARM_ARCH_ETH_H +#define ASMARM_ARCH_ETH_H + +struct netxeth_platform_data { + unsigned int xcno; /* number of xmac/xpec engine this eth uses */ +}; + +#endif -- cgit v1.2.3 From 293b2da1b61136813fc2764f43304c66ff8040e9 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 24 Aug 2012 15:16:48 +0200 Subject: ARM: pxa: move platform_data definitions Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the pxa include directories Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Acked-by: Greg Kroah-Hartman Acked-by: Nicolas Pitre Acked-by: Mauro Carvalho Chehab Acked-by: Igor Grinberg Acked-by: Jeff Garzik Acked-by: Marek Vasut Acked-by: Robert Jarzmik Acked-by: Paul Parsons Acked-by: Vinod Koul Acked-By: Stefan Schmidt Cc: Eric Miao Cc: Haojian Zhuang Cc: Daniel Ribeiro Cc: Harald Welte Cc: Philipp Zabel Cc: Tomas Cech Cc: Sergey Lapin Cc: Jonathan Cameron Cc: Dan Williams Cc: Dmitry Torokhov Cc: Chris Ball Cc: David Woodhouse Cc: Samuel Ortiz Cc: Alan Stern Cc: Florian Tobias Schandinat Cc: Liam Girdwood Cc: Jaroslav Kysela Cc: Takashi Iwai Cc: Guennadi Liakhovetski Cc: Artem Bityutskiy Cc: openezx-devel@lists.openezx.org --- arch/arm/mach-mmp/aspenite.c | 2 +- arch/arm/mach-mmp/include/mach/mmp2.h | 2 +- arch/arm/mach-mmp/include/mach/pxa168.h | 4 +- arch/arm/mach-mmp/include/mach/pxa910.h | 2 +- arch/arm/mach-mmp/include/mach/sram.h | 35 ----- arch/arm/mach-mmp/sram.c | 2 +- arch/arm/mach-mmp/teton_bga.c | 2 +- arch/arm/mach-pxa/am200epd.c | 2 +- arch/arm/mach-pxa/am300epd.c | 2 +- arch/arm/mach-pxa/balloon3.c | 8 +- arch/arm/mach-pxa/cm-x270.c | 4 +- arch/arm/mach-pxa/cm-x2xx.c | 2 +- arch/arm/mach-pxa/cm-x300.c | 10 +- arch/arm/mach-pxa/colibri-evalboard.c | 4 +- arch/arm/mach-pxa/colibri-pxa270-income.c | 6 +- arch/arm/mach-pxa/colibri-pxa300.c | 4 +- arch/arm/mach-pxa/colibri-pxa320.c | 4 +- arch/arm/mach-pxa/colibri-pxa3xx.c | 6 +- arch/arm/mach-pxa/corgi.c | 4 +- arch/arm/mach-pxa/csb726.c | 4 +- arch/arm/mach-pxa/devices.c | 16 +- arch/arm/mach-pxa/em-x270.c | 10 +- arch/arm/mach-pxa/eseries.c | 4 +- arch/arm/mach-pxa/ezx.c | 8 +- arch/arm/mach-pxa/gumstix.c | 2 +- arch/arm/mach-pxa/hx4700.c | 2 +- arch/arm/mach-pxa/idp.c | 4 +- arch/arm/mach-pxa/include/mach/arcom-pcmcia.h | 11 -- arch/arm/mach-pxa/include/mach/camera.h | 44 ------ arch/arm/mach-pxa/include/mach/irda.h | 25 --- arch/arm/mach-pxa/include/mach/mmc.h | 28 ---- arch/arm/mach-pxa/include/mach/ohci.h | 36 ----- arch/arm/mach-pxa/include/mach/palmasoc.h | 8 - arch/arm/mach-pxa/include/mach/pata_pxa.h | 33 ---- arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h | 35 ----- arch/arm/mach-pxa/include/mach/pxa930_rotary.h | 20 --- arch/arm/mach-pxa/include/mach/pxa930_trkball.h | 10 -- arch/arm/mach-pxa/include/mach/pxafb.h | 175 --------------------- arch/arm/mach-pxa/littleton.c | 8 +- arch/arm/mach-pxa/lpd270.c | 8 +- arch/arm/mach-pxa/lubbock.c | 6 +- arch/arm/mach-pxa/magician.c | 8 +- arch/arm/mach-pxa/mainstone.c | 10 +- arch/arm/mach-pxa/mioa701.c | 8 +- arch/arm/mach-pxa/mxm8x10.c | 8 +- arch/arm/mach-pxa/palm27x.c | 8 +- arch/arm/mach-pxa/palmld.c | 10 +- arch/arm/mach-pxa/palmt5.c | 10 +- arch/arm/mach-pxa/palmtc.c | 6 +- arch/arm/mach-pxa/palmte2.c | 8 +- arch/arm/mach-pxa/palmtreo.c | 14 +- arch/arm/mach-pxa/palmtx.c | 10 +- arch/arm/mach-pxa/palmz72.c | 12 +- arch/arm/mach-pxa/pcm990-baseboard.c | 8 +- arch/arm/mach-pxa/poodle.c | 6 +- arch/arm/mach-pxa/pxa27x.c | 2 +- arch/arm/mach-pxa/pxa2xx.c | 2 +- arch/arm/mach-pxa/pxa3xx-ulpi.c | 2 +- arch/arm/mach-pxa/pxa3xx.c | 2 +- arch/arm/mach-pxa/raumfeld.c | 8 +- arch/arm/mach-pxa/saar.c | 2 +- arch/arm/mach-pxa/spitz.c | 8 +- arch/arm/mach-pxa/stargate2.c | 2 +- arch/arm/mach-pxa/tavorevb.c | 4 +- arch/arm/mach-pxa/tosa.c | 4 +- arch/arm/mach-pxa/trizeps4.c | 8 +- arch/arm/mach-pxa/viper.c | 4 +- arch/arm/mach-pxa/vpac270.c | 8 +- arch/arm/mach-pxa/z2.c | 6 +- arch/arm/mach-pxa/zeus.c | 8 +- arch/arm/mach-pxa/zylonite.c | 10 +- arch/arm/plat-pxa/include/plat/pxa27x_keypad.h | 73 --------- arch/arm/plat-pxa/include/plat/pxa3xx_nand.h | 79 ---------- drivers/ata/pata_pxa.c | 2 +- drivers/dma/mmp_tdma.c | 2 +- drivers/input/keyboard/pxa27x_keypad.c | 2 +- drivers/input/keyboard/pxa930_rotary.c | 2 +- drivers/input/mouse/pxa930_trkball.c | 2 +- drivers/media/video/pxa_camera.c | 2 +- drivers/mmc/host/pxamci.c | 2 +- drivers/mtd/nand/pxa3xx_nand.c | 2 +- drivers/net/irda/pxaficp_ir.c | 2 +- drivers/pcmcia/pxa2xx_viper.c | 2 +- drivers/usb/host/ohci-pxa27x.c | 4 +- drivers/video/pxafb.c | 2 +- include/linux/platform_data/asoc-palm27x.h | 8 + include/linux/platform_data/ata-pxa.h | 33 ++++ include/linux/platform_data/camera-pxa.h | 44 ++++++ include/linux/platform_data/dma-mmp_tdma.h | 35 +++++ include/linux/platform_data/irda-pxaficp.h | 25 +++ .../linux/platform_data/keyboard-pxa930_rotary.h | 20 +++ include/linux/platform_data/keypad-pxa27x.h | 73 +++++++++ include/linux/platform_data/mmc-pxamci.h | 28 ++++ include/linux/platform_data/mouse-pxa930_trkball.h | 10 ++ include/linux/platform_data/mtd-nand-pxa3xx.h | 79 ++++++++++ include/linux/platform_data/pcmcia-pxa2xx_viper.h | 11 ++ include/linux/platform_data/usb-ohci-pxa27x.h | 36 +++++ include/linux/platform_data/usb-pxa3xx-ulpi.h | 35 +++++ include/linux/platform_data/video-pxafb.h | 175 +++++++++++++++++++++ sound/soc/pxa/palm27x.c | 2 +- 100 files changed, 800 insertions(+), 800 deletions(-) delete mode 100644 arch/arm/mach-mmp/include/mach/sram.h delete mode 100644 arch/arm/mach-pxa/include/mach/arcom-pcmcia.h delete mode 100644 arch/arm/mach-pxa/include/mach/camera.h delete mode 100644 arch/arm/mach-pxa/include/mach/irda.h delete mode 100644 arch/arm/mach-pxa/include/mach/mmc.h delete mode 100644 arch/arm/mach-pxa/include/mach/ohci.h delete mode 100644 arch/arm/mach-pxa/include/mach/palmasoc.h delete mode 100644 arch/arm/mach-pxa/include/mach/pata_pxa.h delete mode 100644 arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h delete mode 100644 arch/arm/mach-pxa/include/mach/pxa930_rotary.h delete mode 100644 arch/arm/mach-pxa/include/mach/pxa930_trkball.h delete mode 100644 arch/arm/mach-pxa/include/mach/pxafb.h delete mode 100644 arch/arm/plat-pxa/include/plat/pxa27x_keypad.h delete mode 100644 arch/arm/plat-pxa/include/plat/pxa3xx_nand.h create mode 100644 include/linux/platform_data/asoc-palm27x.h create mode 100644 include/linux/platform_data/ata-pxa.h create mode 100644 include/linux/platform_data/camera-pxa.h create mode 100644 include/linux/platform_data/dma-mmp_tdma.h create mode 100644 include/linux/platform_data/irda-pxaficp.h create mode 100644 include/linux/platform_data/keyboard-pxa930_rotary.h create mode 100644 include/linux/platform_data/keypad-pxa27x.h create mode 100644 include/linux/platform_data/mmc-pxamci.h create mode 100644 include/linux/platform_data/mouse-pxa930_trkball.h create mode 100644 include/linux/platform_data/mtd-nand-pxa3xx.h create mode 100644 include/linux/platform_data/pcmcia-pxa2xx_viper.h create mode 100644 include/linux/platform_data/usb-ohci-pxa27x.h create mode 100644 include/linux/platform_data/usb-pxa3xx-ulpi.h create mode 100644 include/linux/platform_data/video-pxafb.h (limited to 'include/linux') diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 223090b1444d..e5dba9c5dc54 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -27,7 +27,7 @@ #include #include