From 8825f7c3e5c7b251b49fc594658a96f59417ee16 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Thu, 21 Oct 2010 17:21:19 +0200 Subject: drbd: Silenced an assert That assertion's condition needed adjustment for today's semantics Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- include/linux/drbd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/drbd.h b/include/linux/drbd.h index 9b2a0158f399..ef44c7a0638c 100644 --- a/include/linux/drbd.h +++ b/include/linux/drbd.h @@ -53,7 +53,7 @@ extern const char *drbd_buildtag(void); -#define REL_VERSION "8.3.9rc2" +#define REL_VERSION "8.3.9" #define API_VERSION 88 #define PRO_VERSION_MIN 86 #define PRO_VERSION_MAX 95 -- cgit v1.2.3 From 03ff858c09c81a659b2a90a08826bc0abdbb784c Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 13 Oct 2010 07:36:38 +0000 Subject: ARM: shmobile: remove sh_timer_config clk member Now when the SH-Mobile ARM platforms have been converted to use device name it is possible to remove "clk" from struct sh_timer_config. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/clocksource/sh_cmt.c | 10 +++------- drivers/clocksource/sh_mtu2.c | 10 +++------- drivers/clocksource/sh_tmu.c | 10 +++------- include/linux/sh_timer.h | 1 - 4 files changed, 9 insertions(+), 22 deletions(-) (limited to 'include/linux') diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index a44611652282..d68d3aa1814b 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -616,13 +616,9 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) /* get hold of clock */ p->clk = clk_get(&p->pdev->dev, "cmt_fck"); if (IS_ERR(p->clk)) { - dev_warn(&p->pdev->dev, "using deprecated clock lookup\n"); - p->clk = clk_get(&p->pdev->dev, cfg->clk); - if (IS_ERR(p->clk)) { - dev_err(&p->pdev->dev, "cannot get clock\n"); - ret = PTR_ERR(p->clk); - goto err1; - } + dev_err(&p->pdev->dev, "cannot get clock\n"); + ret = PTR_ERR(p->clk); + goto err1; } if (resource_size(res) == 6) { diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index ef7a5be8a09f..40630cb98237 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -287,13 +287,9 @@ static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev) /* get hold of clock */ p->clk = clk_get(&p->pdev->dev, "mtu2_fck"); if (IS_ERR(p->clk)) { - dev_warn(&p->pdev->dev, "using deprecated clock lookup\n"); - p->clk = clk_get(&p->pdev->dev, cfg->clk); - if (IS_ERR(p->clk)) { - dev_err(&p->pdev->dev, "cannot get clock\n"); - ret = PTR_ERR(p->clk); - goto err1; - } + dev_err(&p->pdev->dev, "cannot get clock\n"); + ret = PTR_ERR(p->clk); + goto err1; } return sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev), diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index de715901b82a..36aba9923060 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -393,13 +393,9 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) /* get hold of clock */ p->clk = clk_get(&p->pdev->dev, "tmu_fck"); if (IS_ERR(p->clk)) { - dev_warn(&p->pdev->dev, "using deprecated clock lookup\n"); - p->clk = clk_get(&p->pdev->dev, cfg->clk); - if (IS_ERR(p->clk)) { - dev_err(&p->pdev->dev, "cannot get clock\n"); - ret = PTR_ERR(p->clk); - goto err1; - } + dev_err(&p->pdev->dev, "cannot get clock\n"); + ret = PTR_ERR(p->clk); + goto err1; } return sh_tmu_register(p, (char *)dev_name(&p->pdev->dev), diff --git a/include/linux/sh_timer.h b/include/linux/sh_timer.h index 864bd56bd3b0..4d9dcd138315 100644 --- a/include/linux/sh_timer.h +++ b/include/linux/sh_timer.h @@ -5,7 +5,6 @@ struct sh_timer_config { char *name; long channel_offset; int timer_bit; - char *clk; unsigned long clockevent_rating; unsigned long clocksource_rating; }; -- cgit v1.2.3 From 7fe19da4ca38fc20cdbc7020fcf2eca8fc756410 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 28 Oct 2010 16:12:33 +0200 Subject: preempt: fix kernel build with !CONFIG_BKL The preempt count logic tries to take the BKL into account, which breaks when CONFIG_BKL is not set. Use the same preempt_count offset that we use without CONFIG_PREEMPT when CONFIG_BKL is disabled. Signed-off-by: Arnd Bergmann Reported-and-tested-by: Kirill A. Shutemov Signed-off-by: Linus Torvalds --- include/linux/hardirq.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index 8a389b608ce3..41cb31f14ee3 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -96,11 +96,15 @@ */ #define in_nmi() (preempt_count() & NMI_MASK) -#if defined(CONFIG_PREEMPT) +#if defined(CONFIG_PREEMPT) && defined(CONFIG_BKL) # define PREEMPT_INATOMIC_BASE kernel_locked() -# define PREEMPT_CHECK_OFFSET 1 #else # define PREEMPT_INATOMIC_BASE 0 +#endif + +#if defined(CONFIG_PREEMPT) +# define PREEMPT_CHECK_OFFSET 1 +#else # define PREEMPT_CHECK_OFFSET 0 #endif -- cgit v1.2.3 From 21b75b019983dfa5c2dda588f4b60b4ca69844a4 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 26 Oct 2010 10:07:17 -0400 Subject: nfsd4: fix 4.1 connection registration race If a connection is closed just after a sequence or create_session is sent over it, we could end up trying to register a callback that will never get called since the xprt is already marked dead. Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4state.c | 16 ++++++++++++---- include/linux/sunrpc/svc_xprt.h | 18 ++++++++++++++---- 2 files changed, 26 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index f1e5ec6b5105..ad2bfa68d534 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -673,16 +673,17 @@ static void nfsd4_hash_conn(struct nfsd4_conn *conn, struct nfsd4_session *ses) spin_unlock(&clp->cl_lock); } -static void nfsd4_register_conn(struct nfsd4_conn *conn) +static int nfsd4_register_conn(struct nfsd4_conn *conn) { conn->cn_xpt_user.callback = nfsd4_conn_lost; - register_xpt_user(conn->cn_xprt, &conn->cn_xpt_user); + return register_xpt_user(conn->cn_xprt, &conn->cn_xpt_user); } static __be32 nfsd4_new_conn(struct svc_rqst *rqstp, struct nfsd4_session *ses) { struct nfsd4_conn *conn; u32 flags = NFS4_CDFC4_FORE; + int ret; if (ses->se_flags & SESSION4_BACK_CHAN) flags |= NFS4_CDFC4_BACK; @@ -690,7 +691,10 @@ static __be32 nfsd4_new_conn(struct svc_rqst *rqstp, struct nfsd4_session *ses) if (!conn) return nfserr_jukebox; nfsd4_hash_conn(conn, ses); - nfsd4_register_conn(conn); + ret = nfsd4_register_conn(conn); + if (ret) + /* oops; xprt is already down: */ + nfsd4_conn_lost(&conn->cn_xpt_user); return nfs_ok; } @@ -1644,6 +1648,7 @@ static void nfsd4_sequence_check_conn(struct nfsd4_conn *new, struct nfsd4_sessi { struct nfs4_client *clp = ses->se_client; struct nfsd4_conn *c; + int ret; spin_lock(&clp->cl_lock); c = __nfsd4_find_conn(new->cn_xprt, ses); @@ -1654,7 +1659,10 @@ static void nfsd4_sequence_check_conn(struct nfsd4_conn *new, struct nfsd4_sessi } __nfsd4_hash_conn(new, ses); spin_unlock(&clp->cl_lock); - nfsd4_register_conn(new); + ret = nfsd4_register_conn(new); + if (ret) + /* oops; xprt is already down: */ + nfsd4_conn_lost(&new->cn_xpt_user); return; } diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h index bbdb680ffbe9..aea0d438e3c7 100644 --- a/include/linux/sunrpc/svc_xprt.h +++ b/include/linux/sunrpc/svc_xprt.h @@ -82,18 +82,28 @@ struct svc_xprt { struct net *xpt_net; }; -static inline void register_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u) +static inline void unregister_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u) { spin_lock(&xpt->xpt_lock); - list_add(&u->list, &xpt->xpt_users); + list_del_init(&u->list); spin_unlock(&xpt->xpt_lock); } -static inline void unregister_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u) +static inline int register_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u) { spin_lock(&xpt->xpt_lock); - list_del_init(&u->list); + if (test_bit(XPT_CLOSE, &xpt->xpt_flags)) { + /* + * The connection is about to be deleted soon (or, + * worse, may already be deleted--in which case we've + * already notified the xpt_users). + */ + spin_unlock(&xpt->xpt_lock); + return -ENOTCONN; + } + list_add(&u->list, &xpt->xpt_users); spin_unlock(&xpt->xpt_lock); + return 0; } int svc_reg_xprt_class(struct svc_xprt_class *); -- cgit v1.2.3 From 95716c0decb2ed3ff94998b6390cc8f8d6d1e748 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 2 Nov 2010 11:33:05 -0700 Subject: Input: adp5588-keys - unify common header defines Unify adp5588-gpio and adp5588-keys common header defines (as per Andrew Morton request). For consistency, move remaining defines and prefix accordingly. No functional changes. Signed-off-by: Michael Hennerich Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/adp5588-keys.c | 74 ++++++++++++----------------------- include/linux/i2c/adp5588.h | 15 ++++++- 2 files changed, 39 insertions(+), 50 deletions(-) (limited to 'include/linux') diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index b92d1cd5cba1..af45d275f686 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -4,7 +4,7 @@ * I2C QWERTY Keypad and IO Expander * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2008-2009 Analog Devices Inc. + * Copyright (C) 2008-2010 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -24,29 +24,6 @@ #include - /* Configuration Register1 */ -#define AUTO_INC (1 << 7) -#define GPIEM_CFG (1 << 6) -#define OVR_FLOW_M (1 << 5) -#define INT_CFG (1 << 4) -#define OVR_FLOW_IEN (1 << 3) -#define K_LCK_IM (1 << 2) -#define GPI_IEN (1 << 1) -#define KE_IEN (1 << 0) - -/* Interrupt Status Register */ -#define CMP2_INT (1 << 5) -#define CMP1_INT (1 << 4) -#define OVR_FLOW_INT (1 << 3) -#define K_LCK_INT (1 << 2) -#define GPI_INT (1 << 1) -#define KE_INT (1 << 0) - -/* Key Lock and Event Counter Register */ -#define K_LCK_EN (1 << 6) -#define LCK21 0x30 -#define KEC 0xF - /* Key Event Register xy */ #define KEY_EV_PRESSED (1 << 7) #define KEY_EV_MASK (0x7F) @@ -55,10 +32,6 @@ #define KEYP_MAX_EVENT 10 -#define MAXGPIO 18 -#define ADP_BANK(offs) ((offs) >> 3) -#define ADP_BIT(offs) (1u << ((offs) & 0x7)) - /* * Early pre 4.0 Silicon required to delay readout by at least 25ms, * since the Event Counter Register updated 25ms after the interrupt @@ -75,7 +48,7 @@ struct adp5588_kpad { const struct adp5588_gpi_map *gpimap; unsigned short gpimapsize; #ifdef CONFIG_GPIOLIB - unsigned char gpiomap[MAXGPIO]; + unsigned char gpiomap[ADP5588_MAXGPIO]; bool export_gpio; struct gpio_chip gc; struct mutex gpio_lock; /* Protect cached dir, dat_out */ @@ -103,8 +76,8 @@ static int adp5588_write(struct i2c_client *client, u8 reg, u8 val) static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off) { struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit); } @@ -113,8 +86,8 @@ static void adp5588_gpio_set_value(struct gpio_chip *chip, unsigned off, int val) { struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); mutex_lock(&kpad->gpio_lock); @@ -132,8 +105,8 @@ static void adp5588_gpio_set_value(struct gpio_chip *chip, static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off) { struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); int ret; mutex_lock(&kpad->gpio_lock); @@ -150,8 +123,8 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip, unsigned off, int val) { struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); int ret; mutex_lock(&kpad->gpio_lock); @@ -176,7 +149,7 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip, static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad, const struct adp5588_kpad_platform_data *pdata) { - bool pin_used[MAXGPIO]; + bool pin_used[ADP5588_MAXGPIO]; int n_unused = 0; int i; @@ -191,7 +164,7 @@ static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad, for (i = 0; i < kpad->gpimapsize; i++) pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true; - for (i = 0; i < MAXGPIO; i++) + for (i = 0; i < ADP5588_MAXGPIO; i++) if (!pin_used[i]) kpad->gpiomap[n_unused++] = i; @@ -234,7 +207,7 @@ static int __devinit adp5588_gpio_add(struct adp5588_kpad *kpad) return error; } - for (i = 0; i <= ADP_BANK(MAXGPIO); i++) { + for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) { kpad->dat_out[i] = adp5588_read(kpad->client, GPIO_DAT_OUT1 + i); kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i); @@ -318,11 +291,11 @@ static void adp5588_work(struct work_struct *work) status = adp5588_read(client, INT_STAT); - if (status & OVR_FLOW_INT) /* Unlikely and should never happen */ + if (status & ADP5588_OVR_FLOW_INT) /* Unlikely and should never happen */ dev_err(&client->dev, "Event Overflow Error\n"); - if (status & KE_INT) { - ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC; + if (status & ADP5588_KE_INT) { + ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & ADP5588_KEC; if (ev_cnt) { adp5588_report_events(kpad, ev_cnt); input_sync(kpad->input); @@ -360,7 +333,7 @@ static int __devinit adp5588_setup(struct i2c_client *client) if (pdata->en_keylock) { ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1); ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2); - ret |= adp5588_write(client, KEY_LCK_EC_STAT, K_LCK_EN); + ret |= adp5588_write(client, KEY_LCK_EC_STAT, ADP5588_K_LCK_EN); } for (i = 0; i < KEYP_MAX_EVENT; i++) @@ -384,7 +357,7 @@ static int __devinit adp5588_setup(struct i2c_client *client) } if (gpio_data) { - for (i = 0; i <= ADP_BANK(MAXGPIO); i++) { + for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) { int pull_mask = gpio_data->pullup_dis_mask; ret |= adp5588_write(client, GPIO_PULL1 + i, @@ -392,11 +365,14 @@ static int __devinit adp5588_setup(struct i2c_client *client) } } - ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT | - OVR_FLOW_INT | K_LCK_INT | - GPI_INT | KE_INT); /* Status is W1C */ + ret |= adp5588_write(client, INT_STAT, + ADP5588_CMP2_INT | ADP5588_CMP1_INT | + ADP5588_OVR_FLOW_INT | ADP5588_K_LCK_INT | + ADP5588_GPI_INT | ADP5588_KE_INT); /* Status is W1C */ - ret |= adp5588_write(client, CFG, INT_CFG | OVR_FLOW_IEN | KE_IEN); + ret |= adp5588_write(client, CFG, ADP5588_INT_CFG | + ADP5588_OVR_FLOW_IEN | + ADP5588_KE_IEN); if (ret < 0) { dev_err(&client->dev, "Write Error\n"); diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h index 3c5d6b6e765c..cec17cf6cac2 100644 --- a/include/linux/i2c/adp5588.h +++ b/include/linux/i2c/adp5588.h @@ -1,7 +1,7 @@ /* * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller * - * Copyright 2009 Analog Devices Inc. + * Copyright 2009-2010 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -77,13 +77,26 @@ /* Configuration Register1 */ #define ADP5588_AUTO_INC (1 << 7) #define ADP5588_GPIEM_CFG (1 << 6) +#define ADP5588_OVR_FLOW_M (1 << 5) #define ADP5588_INT_CFG (1 << 4) +#define ADP5588_OVR_FLOW_IEN (1 << 3) +#define ADP5588_K_LCK_IM (1 << 2) #define ADP5588_GPI_IEN (1 << 1) +#define ADP5588_KE_IEN (1 << 0) /* Interrupt Status Register */ +#define ADP5588_CMP2_INT (1 << 5) +#define ADP5588_CMP1_INT (1 << 4) +#define ADP5588_OVR_FLOW_INT (1 << 3) +#define ADP5588_K_LCK_INT (1 << 2) #define ADP5588_GPI_INT (1 << 1) #define ADP5588_KE_INT (1 << 0) +/* Key Lock and Event Counter Register */ +#define ADP5588_K_LCK_EN (1 << 6) +#define ADP5588_LCK21 0x30 +#define ADP5588_KEC 0xF + #define ADP5588_MAXGPIO 18 #define ADP5588_BANK(offs) ((offs) >> 3) #define ADP5588_BIT(offs) (1u << ((offs) & 0x7)) -- cgit v1.2.3 From b50b521694cb7093640879d3279b88d2873f6183 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 3 Nov 2010 11:02:31 -0700 Subject: Input: export input_reset_device() for use in KGDB KGDB, much like the resume process, needs to be able to mark all keys that were pressed at the time we dropped into the debuggers as "released", since it is unlikely that the keys stay pressed for the entire duration of the debug session. Also we need to make sure that input_reset_device() and input_dev_suspend() only attempt to change state of currenlt opened devices since closed devices may not be ready to accept IO requests. Tested-by: Jason Wessel Signed-off-by: Dmitry Torokhov --- drivers/input/input.c | 50 +++++++++++++++++++++++++++++++++++--------------- include/linux/input.h | 4 +++- 2 files changed, 38 insertions(+), 16 deletions(-) (limited to 'include/linux') diff --git a/drivers/input/input.c b/drivers/input/input.c index d092ef9291da..75bed635b98d 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1565,8 +1565,7 @@ static int input_dev_uevent(struct device *device, struct kobj_uevent_env *env) } \ } while (0) -#ifdef CONFIG_PM -static void input_dev_reset(struct input_dev *dev, bool activate) +static void input_dev_toggle(struct input_dev *dev, bool activate) { if (!dev->event) return; @@ -1580,12 +1579,44 @@ static void input_dev_reset(struct input_dev *dev, bool activate) } } +/** + * input_reset_device() - reset/restore the state of input device + * @dev: input device whose state needs to be reset + * + * This function tries to reset the state of an opened input device and + * bring internal state and state if the hardware in sync with each other. + * We mark all keys as released, restore LED state, repeat rate, etc. + */ +void input_reset_device(struct input_dev *dev) +{ + mutex_lock(&dev->mutex); + + if (dev->users) { + input_dev_toggle(dev, true); + + /* + * Keys that have been pressed at suspend time are unlikely + * to be still pressed when we resume. + */ + spin_lock_irq(&dev->event_lock); + input_dev_release_keys(dev); + spin_unlock_irq(&dev->event_lock); + } + + mutex_unlock(&dev->mutex); +} +EXPORT_SYMBOL(input_reset_device); + +#ifdef CONFIG_PM static int input_dev_suspend(struct device *dev) { struct input_dev *input_dev = to_input_dev(dev); mutex_lock(&input_dev->mutex); - input_dev_reset(input_dev, false); + + if (input_dev->users) + input_dev_toggle(input_dev, false); + mutex_unlock(&input_dev->mutex); return 0; @@ -1595,18 +1626,7 @@ static int input_dev_resume(struct device *dev) { struct input_dev *input_dev = to_input_dev(dev); - mutex_lock(&input_dev->mutex); - input_dev_reset(input_dev, true); - - /* - * Keys that have been pressed at suspend time are unlikely - * to be still pressed when we resume. - */ - spin_lock_irq(&input_dev->event_lock); - input_dev_release_keys(input_dev); - spin_unlock_irq(&input_dev->event_lock); - - mutex_unlock(&input_dev->mutex); + input_reset_device(input_dev); return 0; } diff --git a/include/linux/input.h b/include/linux/input.h index 51af441f3a21..6ef44465db8d 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1406,6 +1406,8 @@ static inline void input_set_drvdata(struct input_dev *dev, void *data) int __must_check input_register_device(struct input_dev *); void input_unregister_device(struct input_dev *); +void input_reset_device(struct input_dev *); + int __must_check input_register_handler(struct input_handler *); void input_unregister_handler(struct input_handler *); @@ -1421,7 +1423,7 @@ void input_release_device(struct input_handle *); int input_open_device(struct input_handle *); void input_close_device(struct input_handle *); -int input_flush_device(struct input_handle* handle, struct file* file); +int input_flush_device(struct input_handle *handle, struct file *file); void input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value); void input_inject_event(struct input_handle *handle, unsigned int type, unsigned int code, int value); -- cgit v1.2.3 From 2f6ba5792ce9e4a731baeb976ccc72e0cf43d20b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 4 Nov 2010 12:21:25 +0900 Subject: mmc: sh_mmcif: Convert extern inline to static inline. Presently the extern inline case results in a compiler warning on ARM due to the memory barrier definition used in the I/O routines. These ultimately all want to be static inline anyways, so just convert them all in place. Signed-off-by: Paul Mundt --- include/linux/mmc/sh_mmcif.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h index d19e2114fd86..5c99da1078aa 100644 --- a/include/linux/mmc/sh_mmcif.h +++ b/include/linux/mmc/sh_mmcif.h @@ -59,19 +59,19 @@ struct sh_mmcif_plat_data { #define MMCIF_CE_HOST_STS2 0x0000004C #define MMCIF_CE_VERSION 0x0000007C -extern inline u32 sh_mmcif_readl(void __iomem *addr, int reg) +static inline u32 sh_mmcif_readl(void __iomem *addr, int reg) { return readl(addr + reg); } -extern inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val) +static inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val) { writel(val, addr + reg); } #define SH_MMCIF_BBS 512 /* boot block size */ -extern inline void sh_mmcif_boot_cmd_send(void __iomem *base, +static inline void sh_mmcif_boot_cmd_send(void __iomem *base, unsigned long cmd, unsigned long arg) { sh_mmcif_writel(base, MMCIF_CE_INT, 0); @@ -79,7 +79,7 @@ extern inline void sh_mmcif_boot_cmd_send(void __iomem *base, sh_mmcif_writel(base, MMCIF_CE_CMD_SET, cmd); } -extern inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask) +static inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask) { unsigned long tmp; int cnt; @@ -95,14 +95,14 @@ extern inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask) return -1; } -extern inline int sh_mmcif_boot_cmd(void __iomem *base, +static inline int sh_mmcif_boot_cmd(void __iomem *base, unsigned long cmd, unsigned long arg) { sh_mmcif_boot_cmd_send(base, cmd, arg); return sh_mmcif_boot_cmd_poll(base, 0x00010000); } -extern inline int sh_mmcif_boot_do_read_single(void __iomem *base, +static inline int sh_mmcif_boot_do_read_single(void __iomem *base, unsigned int block_nr, unsigned long *buf) { @@ -125,7 +125,7 @@ extern inline int sh_mmcif_boot_do_read_single(void __iomem *base, return 0; } -extern inline int sh_mmcif_boot_do_read(void __iomem *base, +static inline int sh_mmcif_boot_do_read(void __iomem *base, unsigned long first_block, unsigned long nr_blocks, void *buf) @@ -143,7 +143,7 @@ extern inline int sh_mmcif_boot_do_read(void __iomem *base, return ret; } -extern inline void sh_mmcif_boot_init(void __iomem *base) +static inline void sh_mmcif_boot_init(void __iomem *base) { unsigned long tmp; @@ -177,7 +177,7 @@ extern inline void sh_mmcif_boot_init(void __iomem *base) sh_mmcif_boot_cmd(base, 0x03400040, 0x00010000); } -extern inline void sh_mmcif_boot_slurp(void __iomem *base, +static inline void sh_mmcif_boot_slurp(void __iomem *base, unsigned char *buf, unsigned long no_bytes) { -- cgit v1.2.3 From 9c7564620f82e55a9c8713311bffd401ec9d60fe Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Sat, 23 Oct 2010 05:12:01 -0500 Subject: USB: musb: blackfin: push clkin value to platform resources In order to not touch the driver file for different xtal usage, push the clkin value to board file and calculate the register value instead of hardcoding it. Signed-off-by: Bob Liu Signed-off-by: Mike Frysinger Signed-off-by: Felipe Balbi --- drivers/usb/musb/blackfin.c | 3 ++- include/linux/usb/musb.h | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index ade45a219c47..fcb5206a65bd 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -337,7 +337,8 @@ static void musb_platform_reg_init(struct musb *musb) } /* Configure PLL oscillator register */ - bfin_write_USB_PLLOSC_CTRL(0x30a8); + bfin_write_USB_PLLOSC_CTRL(0x3080 | + ((480/musb->config->clkin) << 1)); SSYNC(); bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1); diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index ee2dd1d506ed..2387f9fc8138 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -89,6 +89,8 @@ struct musb_hdrc_config { /* A GPIO controlling VRSEL in Blackfin */ unsigned int gpio_vrsel; unsigned int gpio_vrsel_active; + /* musb CLKIN in Blackfin in MHZ */ + unsigned char clkin; #endif }; -- cgit v1.2.3 From 6af26c6c99f01e810f9944543df810e320284aa3 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 2 Nov 2010 11:27:24 +0000 Subject: sh: add clk_round_parent() to optimize parent clock rate Sometimes it is possible and reasonable to adjust the parent clock rate to improve precision of the child clock, e.g., if the child clock has no siblings. clk_round_parent() is a new addition to the SH clock-framework API, that implements such an optimization for child clocks with divisors, taking all integer values in a range. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- drivers/sh/clk/core.c | 75 ++++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/sh_clk.h | 4 +++ 2 files changed, 79 insertions(+) (limited to 'include/linux') diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c index 861144360d89..b3840597ad6e 100644 --- a/drivers/sh/clk/core.c +++ b/drivers/sh/clk/core.c @@ -541,6 +541,81 @@ long clk_round_rate(struct clk *clk, unsigned long rate) } EXPORT_SYMBOL_GPL(clk_round_rate); +long clk_round_parent(struct clk *clk, unsigned long target, + unsigned long *best_freq, unsigned long *parent_freq, + unsigned int div_min, unsigned int div_max) +{ + struct cpufreq_frequency_table *freq, *best = NULL; + unsigned long error = ULONG_MAX, freq_high, freq_low, div; + struct clk *parent = clk_get_parent(clk); + + if (!parent) { + *parent_freq = 0; + *best_freq = clk_round_rate(clk, target); + return abs(target - *best_freq); + } + + for (freq = parent->freq_table; freq->frequency != CPUFREQ_TABLE_END; + freq++) { + if (freq->frequency == CPUFREQ_ENTRY_INVALID) + continue; + + if (unlikely(freq->frequency / target <= div_min - 1)) { + unsigned long freq_max = (freq->frequency + div_min / 2) / div_min; + if (error > target - freq_max) { + error = target - freq_max; + best = freq; + if (best_freq) + *best_freq = freq_max; + } + pr_debug("too low freq %lu, error %lu\n", freq->frequency, target - freq_max); + if (!error) + break; + continue; + } + + if (unlikely(freq->frequency / target >= div_max)) { + unsigned long freq_min = (freq->frequency + div_max / 2) / div_max; + if (error > freq_min - target) { + error = freq_min - target; + best = freq; + if (best_freq) + *best_freq = freq_min; + } + pr_debug("too high freq %lu, error %lu\n", freq->frequency, freq_min - target); + if (!error) + break; + continue; + } + + + div = freq->frequency / target; + freq_high = freq->frequency / div; + freq_low = freq->frequency / (div + 1); + if (freq_high - target < error) { + error = freq_high - target; + best = freq; + if (best_freq) + *best_freq = freq_high; + } + if (target - freq_low < error) { + error = target - freq_low; + best = freq; + if (best_freq) + *best_freq = freq_low; + } + pr_debug("%u / %lu = %lu, / %lu = %lu, best %lu, parent %u\n", + freq->frequency, div, freq_high, div + 1, freq_low, + *best_freq, best->frequency); + if (!error) + break; + } + if (parent_freq) + *parent_freq = best->frequency; + return error; +} +EXPORT_SYMBOL_GPL(clk_round_parent); + #ifdef CONFIG_PM static int clks_sysdev_suspend(struct sys_device *dev, pm_message_t state) { diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index 4dca992f3093..cea0c38e7a63 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -122,6 +122,10 @@ int clk_rate_table_find(struct clk *clk, long clk_rate_div_range_round(struct clk *clk, unsigned int div_min, unsigned int div_max, unsigned long rate); +long clk_round_parent(struct clk *clk, unsigned long target, + unsigned long *best_freq, unsigned long *parent_freq, + unsigned int div_min, unsigned int div_max); + #define SH_CLK_MSTP32(_parent, _enable_reg, _enable_bit, _flags) \ { \ .parent = _parent, \ -- cgit v1.2.3 From 18543a643fae694982c7d89c22436885f3506497 Mon Sep 17 00:00:00 2001 From: Guillaume Chazarain Date: Sat, 6 Nov 2010 06:39:32 +0000 Subject: net: Detect and ignore netif_stop_queue() calls before register_netdev() After e6484930d7c73d324bccda7d43d131088da697b9: net: allocate tx queues in register_netdevice These calls make net drivers oops at load time, so let's avoid people git-bisect'ing known problems. Signed-off-by: Guillaume Chazarain Signed-off-by: David S. Miller --- include/linux/netdevice.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 072652d94d9f..d8fd2c23a1b9 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1554,6 +1554,11 @@ static inline void netif_tx_wake_all_queues(struct net_device *dev) static inline void netif_tx_stop_queue(struct netdev_queue *dev_queue) { + if (WARN_ON(!dev_queue)) { + printk(KERN_INFO "netif_stop_queue() cannot be called before " + "register_netdev()"); + return; + } set_bit(__QUEUE_STATE_XOFF, &dev_queue->state); } -- cgit v1.2.3 From a91be2acc648f18d39b15c6eb7136b0c208e2cab Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 25 Oct 2010 15:04:13 -0700 Subject: usb.h: fix ioctl kernel-doc info Fix struct field name, prevent kernel-doc warnings. Warning(include/linux/usb.h:865): No description found for parameter 'unlocked_ioctl' Warning(include/linux/usb.h:865): Excess struct/union/enum/typedef member 'ioctl' description in 'usb_driver' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index 35fe6ab222bb..24300d8a1bc1 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -797,7 +797,7 @@ struct usbdrv_wrap { * @disconnect: Called when the interface is no longer accessible, usually * because its device has been (or is being) disconnected or the * driver module is being unloaded. - * @ioctl: Used for drivers that want to talk to userspace through + * @unlocked_ioctl: Used for drivers that want to talk to userspace through * the "usbfs" filesystem. This lets devices provide ways to * expose information to user space regardless of where they * do (or don't) show up otherwise in the filesystem. -- cgit v1.2.3 From 6070bf3596f3b5a54091a08d5b2bc90c143dc264 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Mon, 8 Nov 2010 11:20:49 +0900 Subject: kernel: Constify temporary variable in roundup() Fix build error with GCC 3.x caused by commit b28efd54 "kernel: roundup should only reference arguments once" by constifying temporary variable used in that macro. Signed-off-by: Tetsuo Handa Suggested-by: Andrew Morton Acked-by: Eric Paris Signed-off-by: James Morris --- include/linux/kernel.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 450092c1e35f..b526947bdf48 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -60,7 +60,7 @@ extern const char linux_proc_banner[]; #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) #define roundup(x, y) ( \ { \ - typeof(y) __y = y; \ + const typeof(y) __y = y; \ (((x) + (__y - 1)) / __y) * __y; \ } \ ) -- cgit v1.2.3 From 99870bd784ff9eb2405eab060125c0ded74968cd Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 8 Nov 2010 17:02:26 +0900 Subject: sh: intc: Fix up initializers for gcc 4.5. The _INTC_ARRAY() initializer presently does a NULL test which blows up as a non-constant initializer under gcc 4.5. This switches over to a type test to account for NULL initializers explicitly. Signed-off-by: Paul Mundt --- include/linux/sh_intc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h index f656d1a43dc0..5812fefbcedf 100644 --- a/include/linux/sh_intc.h +++ b/include/linux/sh_intc.h @@ -79,7 +79,7 @@ struct intc_hw_desc { unsigned int nr_subgroups; }; -#define _INTC_ARRAY(a) a, a == NULL ? 0 : sizeof(a)/sizeof(*a) +#define _INTC_ARRAY(a) a, __same_type(a, NULL) ? 0 : sizeof(a)/sizeof(*a) #define INTC_HW_DESC(vectors, groups, mask_regs, \ prio_regs, sense_regs, ack_regs) \ -- cgit v1.2.3 From 65f8e441ed3c31c456aa70db1fbe50fb42079375 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 9 Nov 2010 10:48:25 +0000 Subject: tty: Fix formatting in tty.h Someone added a new ldisc number and messed up the tabbing. Fix it before anyone else copies it. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index 2a754748dd5f..c7ea9bc8897c 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -50,7 +50,7 @@ #define N_V253 19 /* Codec control over voice modem */ #define N_CAIF 20 /* CAIF protocol for talking to modems */ #define N_GSM0710 21 /* GSM 0710 Mux */ -#define N_TI_WL 22 /* for TI's WL BT, FM, GPS combo chips */ +#define N_TI_WL 22 /* for TI's WL BT, FM, GPS combo chips */ /* * This character is the same as _POSIX_VDISABLE: it cannot be used as -- cgit v1.2.3 From 02e031cbc843b010e72fcc05c76113c688b2860f Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 10 Nov 2010 14:54:09 +0100 Subject: block: remove REQ_HARDBARRIER REQ_HARDBARRIER is dead now, so remove the leftovers. What's left at this point is: - various checks inside the block layer. - sanity checks in bio based drivers. - now unused bio_empty_barrier helper. - Xen blockfront use of BLKIF_OP_WRITE_BARRIER - it's dead for a while, but Xen really needs to sort out it's barrier situaton. - setting of ordered tags in uas - dead code copied from old scsi drivers. - scsi different retry for barriers - it's dead and should have been removed when flushes were converted to FS requests. - blktrace handling of barriers - removed. Someone who knows blktrace better should add support for REQ_FLUSH and REQ_FUA, though. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- block/blk-core.c | 7 ------- block/elevator.c | 4 ++-- drivers/block/aoe/aoeblk.c | 3 --- drivers/block/loop.c | 6 ------ drivers/block/xen-blkfront.c | 2 -- drivers/scsi/scsi_error.c | 18 +++++------------- drivers/usb/storage/uas.c | 5 +---- include/linux/bio.h | 4 ---- include/linux/blk_types.h | 6 ++---- include/linux/blkdev.h | 3 +-- kernel/trace/blktrace.c | 4 ---- 11 files changed, 11 insertions(+), 51 deletions(-) (limited to 'include/linux') diff --git a/block/blk-core.c b/block/blk-core.c index 17fcb83670c0..4ce953f1b390 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1194,13 +1194,6 @@ static int __make_request(struct request_queue *q, struct bio *bio) int where = ELEVATOR_INSERT_SORT; int rw_flags; - /* REQ_HARDBARRIER is no more */ - if (WARN_ONCE(bio->bi_rw & REQ_HARDBARRIER, - "block: HARDBARRIER is deprecated, use FLUSH/FUA instead\n")) { - bio_endio(bio, -EOPNOTSUPP); - return 0; - } - /* * low level driver can indicate that it wants pages above a * certain limit bounced to low memory (ie for highmem, or even diff --git a/block/elevator.c b/block/elevator.c index 282e8308f7e2..2569512830d3 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -429,7 +429,7 @@ void elv_dispatch_sort(struct request_queue *q, struct request *rq) q->nr_sorted--; boundary = q->end_sector; - stop_flags = REQ_SOFTBARRIER | REQ_HARDBARRIER | REQ_STARTED; + stop_flags = REQ_SOFTBARRIER | REQ_STARTED; list_for_each_prev(entry, &q->queue_head) { struct request *pos = list_entry_rq(entry); @@ -691,7 +691,7 @@ void elv_insert(struct request_queue *q, struct request *rq, int where) void __elv_add_request(struct request_queue *q, struct request *rq, int where, int plug) { - if (rq->cmd_flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) { + if (rq->cmd_flags & REQ_SOFTBARRIER) { /* barriers are scheduling boundary, update end_sector */ if (rq->cmd_type == REQ_TYPE_FS || (rq->cmd_flags & REQ_DISCARD)) { diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c index 541e18879965..528f6318ded1 100644 --- a/drivers/block/aoe/aoeblk.c +++ b/drivers/block/aoe/aoeblk.c @@ -180,9 +180,6 @@ aoeblk_make_request(struct request_queue *q, struct bio *bio) BUG(); bio_endio(bio, -ENXIO); return 0; - } else if (bio->bi_rw & REQ_HARDBARRIER) { - bio_endio(bio, -EOPNOTSUPP); - return 0; } else if (bio->bi_io_vec == NULL) { printk(KERN_ERR "aoe: bi_io_vec is NULL\n"); BUG(); diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 1e5284ef65fa..7ea0bea2f7e3 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -481,12 +481,6 @@ static int do_bio_filebacked(struct loop_device *lo, struct bio *bio) if (bio_rw(bio) == WRITE) { struct file *file = lo->lo_backing_file; - /* REQ_HARDBARRIER is deprecated */ - if (bio->bi_rw & REQ_HARDBARRIER) { - ret = -EOPNOTSUPP; - goto out; - } - if (bio->bi_rw & REQ_FLUSH) { ret = vfs_fsync(file, 0); if (unlikely(ret && ret != -EINVAL)) { diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 06e2812ba124..255035cfc88a 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -289,8 +289,6 @@ static int blkif_queue_request(struct request *req) ring_req->operation = rq_data_dir(req) ? BLKIF_OP_WRITE : BLKIF_OP_READ; - if (req->cmd_flags & REQ_HARDBARRIER) - ring_req->operation = BLKIF_OP_WRITE_BARRIER; ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg); BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST); diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 1de30eb83bb0..f3cf924a2cd9 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -320,19 +320,11 @@ static int scsi_check_sense(struct scsi_cmnd *scmd) "changed. The Linux SCSI layer does not " "automatically adjust these parameters.\n"); - if (scmd->request->cmd_flags & REQ_HARDBARRIER) - /* - * barrier requests should always retry on UA - * otherwise block will get a spurious error - */ - return NEEDS_RETRY; - else - /* - * for normal (non barrier) commands, pass the - * UA upwards for a determination in the - * completion functions - */ - return SUCCESS; + /* + * Pass the UA upwards for a determination in the completion + * functions. + */ + return SUCCESS; /* these three are not supported */ case COPY_ABORTED: diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 2054b1e25a65..d1268191acbd 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -331,10 +331,7 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, iu->iu_id = IU_ID_COMMAND; iu->tag = cpu_to_be16(stream_id); - if (sdev->ordered_tags && (cmnd->request->cmd_flags & REQ_HARDBARRIER)) - iu->prio_attr = UAS_ORDERED_TAG; - else - iu->prio_attr = UAS_SIMPLE_TAG; + iu->prio_attr = UAS_SIMPLE_TAG; iu->len = len; int_to_scsilun(sdev->lun, &iu->lun); memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len); diff --git a/include/linux/bio.h b/include/linux/bio.h index ba679992d39b..35dcdb3589bc 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -66,10 +66,6 @@ #define bio_offset(bio) bio_iovec((bio))->bv_offset #define bio_segments(bio) ((bio)->bi_vcnt - (bio)->bi_idx) #define bio_sectors(bio) ((bio)->bi_size >> 9) -#define bio_empty_barrier(bio) \ - ((bio->bi_rw & REQ_HARDBARRIER) && \ - !bio_has_data(bio) && \ - !(bio->bi_rw & REQ_DISCARD)) static inline unsigned int bio_cur_bytes(struct bio *bio) { diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index 0437ab6bb54c..46ad5197537a 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -122,7 +122,6 @@ enum rq_flag_bits { __REQ_FAILFAST_TRANSPORT, /* no driver retries of transport errors */ __REQ_FAILFAST_DRIVER, /* no driver retries of driver errors */ - __REQ_HARDBARRIER, /* may not be passed by drive either */ __REQ_SYNC, /* request is sync (sync write or read) */ __REQ_META, /* metadata io request */ __REQ_DISCARD, /* request to discard sectors */ @@ -159,7 +158,6 @@ enum rq_flag_bits { #define REQ_FAILFAST_DEV (1 << __REQ_FAILFAST_DEV) #define REQ_FAILFAST_TRANSPORT (1 << __REQ_FAILFAST_TRANSPORT) #define REQ_FAILFAST_DRIVER (1 << __REQ_FAILFAST_DRIVER) -#define REQ_HARDBARRIER (1 << __REQ_HARDBARRIER) #define REQ_SYNC (1 << __REQ_SYNC) #define REQ_META (1 << __REQ_META) #define REQ_DISCARD (1 << __REQ_DISCARD) @@ -168,8 +166,8 @@ enum rq_flag_bits { #define REQ_FAILFAST_MASK \ (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER) #define REQ_COMMON_MASK \ - (REQ_WRITE | REQ_FAILFAST_MASK | REQ_HARDBARRIER | REQ_SYNC | \ - REQ_META | REQ_DISCARD | REQ_NOIDLE | REQ_FLUSH | REQ_FUA) + (REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_DISCARD | \ + REQ_NOIDLE | REQ_FLUSH | REQ_FUA) #define REQ_CLONE_MASK REQ_COMMON_MASK #define REQ_UNPLUG (1 << __REQ_UNPLUG) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 5027a599077d..aae86fd10c4f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -552,8 +552,7 @@ static inline void blk_clear_queue_full(struct request_queue *q, int sync) * it already be started by driver. */ #define RQ_NOMERGE_FLAGS \ - (REQ_NOMERGE | REQ_STARTED | REQ_HARDBARRIER | REQ_SOFTBARRIER | \ - REQ_FLUSH | REQ_FUA) + (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA) #define rq_mergeable(rq) \ (!((rq)->cmd_flags & RQ_NOMERGE_FLAGS) && \ (((rq)->cmd_flags & REQ_DISCARD) || \ diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index bc251ed66724..7b8ec0281548 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -168,7 +168,6 @@ static int act_log_check(struct blk_trace *bt, u32 what, sector_t sector, static const u32 ddir_act[2] = { BLK_TC_ACT(BLK_TC_READ), BLK_TC_ACT(BLK_TC_WRITE) }; -#define BLK_TC_HARDBARRIER BLK_TC_BARRIER #define BLK_TC_RAHEAD BLK_TC_AHEAD /* The ilog2() calls fall out because they're constant */ @@ -196,7 +195,6 @@ static void __blk_add_trace(struct blk_trace *bt, sector_t sector, int bytes, return; what |= ddir_act[rw & WRITE]; - what |= MASK_TC_BIT(rw, HARDBARRIER); what |= MASK_TC_BIT(rw, SYNC); what |= MASK_TC_BIT(rw, RAHEAD); what |= MASK_TC_BIT(rw, META); @@ -1807,8 +1805,6 @@ void blk_fill_rwbs(char *rwbs, u32 rw, int bytes) if (rw & REQ_RAHEAD) rwbs[i++] = 'A'; - if (rw & REQ_HARDBARRIER) - rwbs[i++] = 'B'; if (rw & REQ_SYNC) rwbs[i++] = 'S'; if (rw & REQ_META) -- cgit v1.2.3 From eed01528a45dc4138e9a08064b4b6cc1a9426899 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Tue, 26 Oct 2010 16:08:01 +0200 Subject: perf_events: Fix time tracking in samples This patch corrects time tracking in samples. Without this patch both time_enabled and time_running are bogus when user asks for PERF_SAMPLE_READ. One uses PERF_SAMPLE_READ to sample the values of other counters in each sample. Because of multiplexing, it is necessary to know both time_enabled, time_running to be able to scale counts correctly. In this second version of the patch, we maintain a shadow copy of ctx->time which allows us to compute ctx->time without calling update_context_time() from NMI context. We avoid the issue that update_context_time() must always be called with ctx->lock held. We do not keep shadow copies of the other event timings because if the lead event is overflowing then it is active and thus it's been scheduled in via event_sched_in() in which case neither tstamp_stopped, tstamp_running can be modified. This timing logic only applies to samples when PERF_SAMPLE_READ is used. Note that this patch does not address timing issues related to sampling inheritance between tasks. This will be addressed in a future patch. With this patch, the libpfm4 example task_smpl now reports correct counts (shown on 2.4GHz Core 2): $ task_smpl -p 2400000000 -e unhalted_core_cycles:u,instructions_retired:u,baclears noploop 5 noploop for 5 seconds IIP:0x000000004006d6 PID:5596 TID:5596 TIME:466,210,211,430 STREAM_ID:33 PERIOD:2,400,000,000 ENA=1,010,157,814 RUN=1,010,157,814 NR=3 2,400,000,254 unhalted_core_cycles:u (33) 2,399,273,744 instructions_retired:u (34) 53,340 baclears (35) Signed-off-by: Stephane Eranian Signed-off-by: Peter Zijlstra LKML-Reference: <4cc6e14b.1e07e30a.256e.5190@mx.google.com> Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 10 ++++++++++ kernel/perf_event.c | 42 ++++++++++++++++++++++++++++++++++-------- 2 files changed, 44 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 057bf22a8323..40150f345982 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -747,6 +747,16 @@ struct perf_event { u64 tstamp_running; u64 tstamp_stopped; + /* + * timestamp shadows the actual context timing but it can + * be safely used in NMI interrupt context. It reflects the + * context time as it was when the event was last scheduled in. + * + * ctx_time already accounts for ctx->timestamp. Therefore to + * compute ctx_time for a sample, simply add perf_clock(). + */ + u64 shadow_ctx_time; + struct perf_event_attr attr; struct hw_perf_event hw; diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 517d827f4982..cb6c0d2af68f 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -674,6 +674,8 @@ event_sched_in(struct perf_event *event, event->tstamp_running += ctx->time - event->tstamp_stopped; + event->shadow_ctx_time = ctx->time - ctx->timestamp; + if (!is_software_event(event)) cpuctx->active_oncpu++; ctx->nr_active++; @@ -3396,7 +3398,8 @@ static u32 perf_event_tid(struct perf_event *event, struct task_struct *p) } static void perf_output_read_one(struct perf_output_handle *handle, - struct perf_event *event) + struct perf_event *event, + u64 enabled, u64 running) { u64 read_format = event->attr.read_format; u64 values[4]; @@ -3404,11 +3407,11 @@ static void perf_output_read_one(struct perf_output_handle *handle, values[n++] = perf_event_count(event); if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) { - values[n++] = event->total_time_enabled + + values[n++] = enabled + atomic64_read(&event->child_total_time_enabled); } if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) { - values[n++] = event->total_time_running + + values[n++] = running + atomic64_read(&event->child_total_time_running); } if (read_format & PERF_FORMAT_ID) @@ -3421,7 +3424,8 @@ static void perf_output_read_one(struct perf_output_handle *handle, * XXX PERF_FORMAT_GROUP vs inherited events seems difficult. */ static void perf_output_read_group(struct perf_output_handle *handle, - struct perf_event *event) + struct perf_event *event, + u64 enabled, u64 running) { struct perf_event *leader = event->group_leader, *sub; u64 read_format = event->attr.read_format; @@ -3431,10 +3435,10 @@ static void perf_output_read_group(struct perf_output_handle *handle, values[n++] = 1 + leader->nr_siblings; if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) - values[n++] = leader->total_time_enabled; + values[n++] = enabled; if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) - values[n++] = leader->total_time_running; + values[n++] = running; if (leader != event) leader->pmu->read(leader); @@ -3459,13 +3463,35 @@ static void perf_output_read_group(struct perf_output_handle *handle, } } +#define PERF_FORMAT_TOTAL_TIMES (PERF_FORMAT_TOTAL_TIME_ENABLED|\ + PERF_FORMAT_TOTAL_TIME_RUNNING) + static void perf_output_read(struct perf_output_handle *handle, struct perf_event *event) { + u64 enabled = 0, running = 0, now, ctx_time; + u64 read_format = event->attr.read_format; + + /* + * compute total_time_enabled, total_time_running + * based on snapshot values taken when the event + * was last scheduled in. + * + * we cannot simply called update_context_time() + * because of locking issue as we are called in + * NMI context + */ + if (read_format & PERF_FORMAT_TOTAL_TIMES) { + now = perf_clock(); + ctx_time = event->shadow_ctx_time + now; + enabled = ctx_time - event->tstamp_enabled; + running = ctx_time - event->tstamp_running; + } + if (event->attr.read_format & PERF_FORMAT_GROUP) - perf_output_read_group(handle, event); + perf_output_read_group(handle, event, enabled, running); else - perf_output_read_one(handle, event); + perf_output_read_one(handle, event, enabled, running); } void perf_output_sample(struct perf_output_handle *handle, -- cgit v1.2.3 From cedb4a7d9f6aedb0dce94d6285b69dcb3c10fa05 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 11 Nov 2010 13:37:54 +0100 Subject: block: remove unused copy_io_context() Reported-by: Oleg Nesterov Signed-off-by: Jens Axboe --- block/blk-ioc.c | 14 -------------- include/linux/iocontext.h | 1 - 2 files changed, 15 deletions(-) (limited to 'include/linux') diff --git a/block/blk-ioc.c b/block/blk-ioc.c index d22c4c55c406..3c7a339fe381 100644 --- a/block/blk-ioc.c +++ b/block/blk-ioc.c @@ -153,20 +153,6 @@ struct io_context *get_io_context(gfp_t gfp_flags, int node) } EXPORT_SYMBOL(get_io_context); -void copy_io_context(struct io_context **pdst, struct io_context **psrc) -{ - struct io_context *src = *psrc; - struct io_context *dst = *pdst; - - if (src) { - BUG_ON(atomic_long_read(&src->refcount) == 0); - atomic_long_inc(&src->refcount); - put_io_context(dst); - *pdst = src; - } -} -EXPORT_SYMBOL(copy_io_context); - static int __init blk_ioc_init(void) { iocontext_cachep = kmem_cache_create("blkdev_ioc", diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index 3e70b21884a9..b2eee896dcbc 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -76,7 +76,6 @@ int put_io_context(struct io_context *ioc); void exit_io_context(struct task_struct *task); struct io_context *get_io_context(gfp_t gfp_flags, int node); struct io_context *alloc_io_context(gfp_t gfp_flags, int node); -void copy_io_context(struct io_context **pdst, struct io_context **psrc); #else static inline void exit_io_context(struct task_struct *task) { -- cgit v1.2.3 From ac5aa2e3332ec04889074afdbd1479424d0227a5 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Fri, 12 Nov 2010 08:26:06 +0100 Subject: netfilter: NF_HOOK_COND has wrong conditional The NF_HOOK_COND returns 0 when it shouldn't due to what I believe to be an error in the code as the order of operations is not what was intended. C will evalutate == before =. Which means ret is getting set to the bool result, rather than the return value of the function call. The code says if (ret = function() == 1) when it meant to say: if ((ret = function()) == 1) Normally the compiler would warn, but it doesn't notice it because its a actually complex conditional and so the wrong code is wrapped in an explict set of () [exactly what the compiler wants you to do if this was intentional]. Fixing this means that errors when netfilter denies a packet get propagated back up the stack rather than lost. Problem introduced by commit 2249065f (netfilter: get rid of the grossness in netfilter.h). Signed-off-by: Eric Paris Cc: stable@kernel.org Signed-off-by: Patrick McHardy --- include/linux/netfilter.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index 89341c32631a..03317c8d4077 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -215,7 +215,7 @@ NF_HOOK_COND(uint8_t pf, unsigned int hook, struct sk_buff *skb, int ret; if (!cond || - (ret = nf_hook_thresh(pf, hook, skb, in, out, okfn, INT_MIN) == 1)) + ((ret = nf_hook_thresh(pf, hook, skb, in, out, okfn, INT_MIN)) == 1)) ret = okfn(skb); return ret; } -- cgit v1.2.3 From 8705a1baf78287eceeb00bc29401d0ae6a03f213 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 11 Nov 2010 14:05:07 -0800 Subject: include/linux/resource.h needs types.h Fix the following warning: usr/include/linux/resource.h:49: found __[us]{8,16,32,64} type without #include Signed-off-by: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/resource.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/resource.h b/include/linux/resource.h index 88d36f9145ba..d01c96c1966e 100644 --- a/include/linux/resource.h +++ b/include/linux/resource.h @@ -2,6 +2,7 @@ #define _LINUX_RESOURCE_H #include +#include /* * Resource control/accounting header file for linux -- cgit v1.2.3 From 3f9d35b9514da6757ca98831372518f9eeb71b33 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 11 Nov 2010 14:05:08 -0800 Subject: atomic: add atomic_inc_not_zero_hint() Followup of perf tools session in Netfilter WorkShop 2010 In the network stack we make high usage of atomic_inc_not_zero() in contexts we know the probable value of atomic before increment (2 for udp sockets for example) Using a special version of atomic_inc_not_zero() giving this hint can help processor to use less bus transactions. On x86 (MESI protocol) for example, this avoids entering Shared state, because "lock cmpxchg" issues an RFO (Read For Ownership) akpm: Adds a new include/linux/atomic.h. This means that new code should henceforth include linux/atomic.h and not asm/atomic.h. The presence of include/linux/atomic.h will in fact cause checkpatch.pl to warn about use of asm/atomic.h. The new include/linux/atomic.h becomes the place where arch-neutral atomic_t code should be placed. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Eric Dumazet Cc: Christoph Lameter Cc: Ingo Molnar Cc: Andi Kleen Cc: Arnaldo Carvalho de Melo Cc: David Miller Cc: "Paul E. McKenney" Cc: Nick Piggin Reviewed-by: "Paul E. McKenney" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/atomic.h | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 include/linux/atomic.h (limited to 'include/linux') diff --git a/include/linux/atomic.h b/include/linux/atomic.h new file mode 100644 index 000000000000..96c038e43d66 --- /dev/null +++ b/include/linux/atomic.h @@ -0,0 +1,37 @@ +#ifndef _LINUX_ATOMIC_H +#define _LINUX_ATOMIC_H +#include + +/** + * atomic_inc_not_zero_hint - increment if not null + * @v: pointer of type atomic_t + * @hint: probable value of the atomic before the increment + * + * This version of atomic_inc_not_zero() gives a hint of probable + * value of the atomic. This helps processor to not read the memory + * before doing the atomic read/modify/write cycle, lowering + * number of bus transactions on some arches. + * + * Returns: 0 if increment was not done, 1 otherwise. + */ +#ifndef atomic_inc_not_zero_hint +static inline int atomic_inc_not_zero_hint(atomic_t *v, int hint) +{ + int val, c = hint; + + /* sanity test, should be removed by compiler if hint is a constant */ + if (!hint) + return atomic_inc_not_zero(v); + + do { + val = atomic_cmpxchg(v, c, c + 1); + if (val == c) + return 1; + c = val; + } while (c); + + return 0; +} +#endif + +#endif /* _LINUX_ATOMIC_H */ -- cgit v1.2.3 From 43b3a0c732776746f53d8ed2ba659583fc1692aa Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 11 Nov 2010 14:05:10 -0800 Subject: include/linux/highmem.h needs hardirq.h Commit 3e4d3af501cc ("mm: stack based kmap_atomic()") introduced the kmap_atomic_idx_push() function which warns on in_irq() with CONFIG_DEBUG_HIGHMEM enabled. This patch includes linux/hardirq.h for the in_irq definition. Signed-off-by: Catalin Marinas Acked-by: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/highmem.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/highmem.h b/include/linux/highmem.h index e9138198e823..b676c585574e 100644 --- a/include/linux/highmem.h +++ b/include/linux/highmem.h @@ -5,6 +5,7 @@ #include #include #include +#include #include -- cgit v1.2.3 From eaf06b241b091357e72b76863ba16e89610d31bd Mon Sep 17 00:00:00 2001 From: Dan Rosenberg Date: Thu, 11 Nov 2010 14:05:18 -0800 Subject: Restrict unprivileged access to kernel syslog The kernel syslog contains debugging information that is often useful during exploitation of other vulnerabilities, such as kernel heap addresses. Rather than futilely attempt to sanitize hundreds (or thousands) of printk statements and simultaneously cripple useful debugging functionality, it is far simpler to create an option that prevents unprivileged users from reading the syslog. This patch, loosely based on grsecurity's GRKERNSEC_DMESG, creates the dmesg_restrict sysctl. When set to "0", the default, no restrictions are enforced. When set to "1", only users with CAP_SYS_ADMIN can read the kernel syslog via dmesg(8) or other mechanisms. [akpm@linux-foundation.org: explain the config option in kernel.txt] Signed-off-by: Dan Rosenberg Acked-by: Ingo Molnar Acked-by: Eugene Teo Acked-by: Kees Cook Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/sysctl/kernel.txt | 14 ++++++++++++++ include/linux/kernel.h | 1 + kernel/printk.c | 6 ++++++ kernel/sysctl.c | 9 +++++++++ security/Kconfig | 12 ++++++++++++ security/commoncap.c | 2 ++ 6 files changed, 44 insertions(+) (limited to 'include/linux') diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 3894eaa23486..209e1584c3dc 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -28,6 +28,7 @@ show up in /proc/sys/kernel: - core_uses_pid - ctrl-alt-del - dentry-state +- dmesg_restrict - domainname - hostname - hotplug @@ -213,6 +214,19 @@ to decide what to do with it. ============================================================== +dmesg_restrict: + +This toggle indicates whether unprivileged users are prevented from using +dmesg(8) to view messages from the kernel's log buffer. When +dmesg_restrict is set to (0) there are no restrictions. When +dmesg_restrict is set set to (1), users must have CAP_SYS_ADMIN to use +dmesg(8). + +The kernel config option CONFIG_SECURITY_DMESG_RESTRICT sets the default +value of dmesg_restrict. + +============================================================== + domainname & hostname: These files can be used to set the NIS/YP domainname and the diff --git a/include/linux/kernel.h b/include/linux/kernel.h index b526947bdf48..fc3da9e4da19 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -293,6 +293,7 @@ extern bool printk_timed_ratelimit(unsigned long *caller_jiffies, unsigned int interval_msec); extern int printk_delay_msec; +extern int dmesg_restrict; /* * Print a one-time message (analogous to WARN_ONCE() et al): diff --git a/kernel/printk.c b/kernel/printk.c index b2ebaee8c377..38e7d5868d60 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -261,6 +261,12 @@ static inline void boot_delay_msec(void) } #endif +#ifdef CONFIG_SECURITY_DMESG_RESTRICT +int dmesg_restrict = 1; +#else +int dmesg_restrict; +#endif + int do_syslog(int type, char __user *buf, int len, bool from_file) { unsigned i, j, limit, count; diff --git a/kernel/sysctl.c b/kernel/sysctl.c index c33a1edb799f..b65bf634035e 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -703,6 +703,15 @@ static struct ctl_table kern_table[] = { .extra2 = &ten_thousand, }, #endif + { + .procname = "dmesg_restrict", + .data = &dmesg_restrict, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_minmax, + .extra1 = &zero, + .extra2 = &one, + }, { .procname = "ngroups_max", .data = &ngroups_max, diff --git a/security/Kconfig b/security/Kconfig index bd72ae623494..e80da955e687 100644 --- a/security/Kconfig +++ b/security/Kconfig @@ -39,6 +39,18 @@ config KEYS_DEBUG_PROC_KEYS If you are unsure as to whether this is required, answer N. +config SECURITY_DMESG_RESTRICT + bool "Restrict unprivileged access to the kernel syslog" + default n + help + This enforces restrictions on unprivileged users reading the kernel + syslog via dmesg(8). + + If this option is not selected, no restrictions will be enforced + unless the dmesg_restrict sysctl is explicitly set to (1). + + If you are unsure how to answer this question, answer N. + config SECURITY bool "Enable different security models" depends on SYSFS diff --git a/security/commoncap.c b/security/commoncap.c index 5e632b4857e4..04b80f9912bf 100644 --- a/security/commoncap.c +++ b/security/commoncap.c @@ -895,6 +895,8 @@ int cap_syslog(int type, bool from_file) { if (type != SYSLOG_ACTION_OPEN && from_file) return 0; + if (dmesg_restrict && !capable(CAP_SYS_ADMIN)) + return -EPERM; if ((type != SYSLOG_ACTION_READ_ALL && type != SYSLOG_ACTION_SIZE_BUFFER) && !capable(CAP_SYS_ADMIN)) return -EPERM; -- cgit v1.2.3 From 27d20fddc8af539464fc3ba499d6a830054c3bd6 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 11 Nov 2010 14:05:19 -0800 Subject: radix-tree: fix RCU bug Salman Qazi describes the following radix-tree bug: In the following case, we get can get a deadlock: 0. The radix tree contains two items, one has the index 0. 1. The reader (in this case find_get_pages) takes the rcu_read_lock. 2. The reader acquires slot(s) for item(s) including the index 0 item. 3. The non-zero index item is deleted, and as a consequence the other item is moved to the root of the tree. The place where it used to be is queued for deletion after the readers finish. 3b. The zero item is deleted, removing it from the direct slot, it remains in the rcu-delayed indirect node. 4. The reader looks at the index 0 slot, and finds that the page has 0 ref count 5. The reader looks at it again, hoping that the item will either be freed or the ref count will increase. This never happens, as the slot it is looking at will never be updated. Also, this slot can never be reclaimed because the reader is holding rcu_read_lock and is in an infinite loop. The fix is to re-use the same "indirect" pointer case that requires a slot lookup retry into a general "retry the lookup" bit. Signed-off-by: Nick Piggin Reported-by: Salman Qazi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/radix-tree.h | 39 +++++++++++++--------- lib/radix-tree.c | 83 ++++++++++++++++++++++++++++++++-------------- mm/filemap.c | 26 ++++++--------- 3 files changed, 91 insertions(+), 57 deletions(-) (limited to 'include/linux') diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h index a39cbed9ee17..ab2baa5c4884 100644 --- a/include/linux/radix-tree.h +++ b/include/linux/radix-tree.h @@ -34,19 +34,13 @@ * needed for RCU lookups (because root->height is unreliable). The only * time callers need worry about this is when doing a lookup_slot under * RCU. + * + * Indirect pointer in fact is also used to tag the last pointer of a node + * when it is shrunk, before we rcu free the node. See shrink code for + * details. */ #define RADIX_TREE_INDIRECT_PTR 1 -#define RADIX_TREE_RETRY ((void *)-1UL) - -static inline void *radix_tree_ptr_to_indirect(void *ptr) -{ - return (void *)((unsigned long)ptr | RADIX_TREE_INDIRECT_PTR); -} -static inline void *radix_tree_indirect_to_ptr(void *ptr) -{ - return (void *)((unsigned long)ptr & ~RADIX_TREE_INDIRECT_PTR); -} #define radix_tree_indirect_to_ptr(ptr) \ radix_tree_indirect_to_ptr((void __force *)(ptr)) @@ -140,16 +134,29 @@ do { \ * removed. * * For use with radix_tree_lookup_slot(). Caller must hold tree at least read - * locked across slot lookup and dereference. More likely, will be used with - * radix_tree_replace_slot(), as well, so caller will hold tree write locked. + * locked across slot lookup and dereference. Not required if write lock is + * held (ie. items cannot be concurrently inserted). + * + * radix_tree_deref_retry must be used to confirm validity of the pointer if + * only the read lock is held. */ static inline void *radix_tree_deref_slot(void **pslot) { - void *ret = rcu_dereference(*pslot); - if (unlikely(radix_tree_is_indirect_ptr(ret))) - ret = RADIX_TREE_RETRY; - return ret; + return rcu_dereference(*pslot); } + +/** + * radix_tree_deref_retry - check radix_tree_deref_slot + * @arg: pointer returned by radix_tree_deref_slot + * Returns: 0 if retry is not required, otherwise retry is required + * + * radix_tree_deref_retry must be used with radix_tree_deref_slot. + */ +static inline int radix_tree_deref_retry(void *arg) +{ + return unlikely((unsigned long)arg & RADIX_TREE_INDIRECT_PTR); +} + /** * radix_tree_replace_slot - replace item in a slot * @pslot: pointer to slot, returned by radix_tree_lookup_slot diff --git a/lib/radix-tree.c b/lib/radix-tree.c index 6f412ab4c24f..5086bb962b4d 100644 --- a/lib/radix-tree.c +++ b/lib/radix-tree.c @@ -82,6 +82,16 @@ struct radix_tree_preload { }; static DEFINE_PER_CPU(struct radix_tree_preload, radix_tree_preloads) = { 0, }; +static inline void *ptr_to_indirect(void *ptr) +{ + return (void *)((unsigned long)ptr | RADIX_TREE_INDIRECT_PTR); +} + +static inline void *indirect_to_ptr(void *ptr) +{ + return (void *)((unsigned long)ptr & ~RADIX_TREE_INDIRECT_PTR); +} + static inline gfp_t root_gfp_mask(struct radix_tree_root *root) { return root->gfp_mask & __GFP_BITS_MASK; @@ -265,7 +275,7 @@ static int radix_tree_extend(struct radix_tree_root *root, unsigned long index) return -ENOMEM; /* Increase the height. */ - node->slots[0] = radix_tree_indirect_to_ptr(root->rnode); + node->slots[0] = indirect_to_ptr(root->rnode); /* Propagate the aggregated tag info into the new root */ for (tag = 0; tag < RADIX_TREE_MAX_TAGS; tag++) { @@ -276,7 +286,7 @@ static int radix_tree_extend(struct radix_tree_root *root, unsigned long index) newheight = root->height+1; node->height = newheight; node->count = 1; - node = radix_tree_ptr_to_indirect(node); + node = ptr_to_indirect(node); rcu_assign_pointer(root->rnode, node); root->height = newheight; } while (height > root->height); @@ -309,7 +319,7 @@ int radix_tree_insert(struct radix_tree_root *root, return error; } - slot = radix_tree_indirect_to_ptr(root->rnode); + slot = indirect_to_ptr(root->rnode); height = root->height; shift = (height-1) * RADIX_TREE_MAP_SHIFT; @@ -325,8 +335,7 @@ int radix_tree_insert(struct radix_tree_root *root, rcu_assign_pointer(node->slots[offset], slot); node->count++; } else - rcu_assign_pointer(root->rnode, - radix_tree_ptr_to_indirect(slot)); + rcu_assign_pointer(root->rnode, ptr_to_indirect(slot)); } /* Go a level down */ @@ -374,7 +383,7 @@ static void *radix_tree_lookup_element(struct radix_tree_root *root, return NULL; return is_slot ? (void *)&root->rnode : node; } - node = radix_tree_indirect_to_ptr(node); + node = indirect_to_ptr(node); height = node->height; if (index > radix_tree_maxindex(height)) @@ -393,7 +402,7 @@ static void *radix_tree_lookup_element(struct radix_tree_root *root, height--; } while (height > 0); - return is_slot ? (void *)slot:node; + return is_slot ? (void *)slot : indirect_to_ptr(node); } /** @@ -455,7 +464,7 @@ void *radix_tree_tag_set(struct radix_tree_root *root, height = root->height; BUG_ON(index > radix_tree_maxindex(height)); - slot = radix_tree_indirect_to_ptr(root->rnode); + slot = indirect_to_ptr(root->rnode); shift = (height - 1) * RADIX_TREE_MAP_SHIFT; while (height > 0) { @@ -509,7 +518,7 @@ void *radix_tree_tag_clear(struct radix_tree_root *root, shift = (height - 1) * RADIX_TREE_MAP_SHIFT; pathp->node = NULL; - slot = radix_tree_indirect_to_ptr(root->rnode); + slot = indirect_to_ptr(root->rnode); while (height > 0) { int offset; @@ -579,7 +588,7 @@ int radix_tree_tag_get(struct radix_tree_root *root, if (!radix_tree_is_indirect_ptr(node)) return (index == 0); - node = radix_tree_indirect_to_ptr(node); + node = indirect_to_ptr(node); height = node->height; if (index > radix_tree_maxindex(height)) @@ -666,7 +675,7 @@ unsigned long radix_tree_range_tag_if_tagged(struct radix_tree_root *root, } shift = (height - 1) * RADIX_TREE_MAP_SHIFT; - slot = radix_tree_indirect_to_ptr(root->rnode); + slot = indirect_to_ptr(root->rnode); /* * we fill the path from (root->height - 2) to 0, leaving the index at @@ -897,7 +906,7 @@ radix_tree_gang_lookup(struct radix_tree_root *root, void **results, results[0] = node; return 1; } - node = radix_tree_indirect_to_ptr(node); + node = indirect_to_ptr(node); max_index = radix_tree_maxindex(node->height); @@ -916,7 +925,8 @@ radix_tree_gang_lookup(struct radix_tree_root *root, void **results, slot = *(((void ***)results)[ret + i]); if (!slot) continue; - results[ret + nr_found] = rcu_dereference_raw(slot); + results[ret + nr_found] = + indirect_to_ptr(rcu_dereference_raw(slot)); nr_found++; } ret += nr_found; @@ -965,7 +975,7 @@ radix_tree_gang_lookup_slot(struct radix_tree_root *root, void ***results, results[0] = (void **)&root->rnode; return 1; } - node = radix_tree_indirect_to_ptr(node); + node = indirect_to_ptr(node); max_index = radix_tree_maxindex(node->height); @@ -1090,7 +1100,7 @@ radix_tree_gang_lookup_tag(struct radix_tree_root *root, void **results, results[0] = node; return 1; } - node = radix_tree_indirect_to_ptr(node); + node = indirect_to_ptr(node); max_index = radix_tree_maxindex(node->height); @@ -1109,7 +1119,8 @@ radix_tree_gang_lookup_tag(struct radix_tree_root *root, void **results, slot = *(((void ***)results)[ret + i]); if (!slot) continue; - results[ret + nr_found] = rcu_dereference_raw(slot); + results[ret + nr_found] = + indirect_to_ptr(rcu_dereference_raw(slot)); nr_found++; } ret += nr_found; @@ -1159,7 +1170,7 @@ radix_tree_gang_lookup_tag_slot(struct radix_tree_root *root, void ***results, results[0] = (void **)&root->rnode; return 1; } - node = radix_tree_indirect_to_ptr(node); + node = indirect_to_ptr(node); max_index = radix_tree_maxindex(node->height); @@ -1195,7 +1206,7 @@ static inline void radix_tree_shrink(struct radix_tree_root *root) void *newptr; BUG_ON(!radix_tree_is_indirect_ptr(to_free)); - to_free = radix_tree_indirect_to_ptr(to_free); + to_free = indirect_to_ptr(to_free); /* * The candidate node has more than one child, or its child @@ -1208,16 +1219,39 @@ static inline void radix_tree_shrink(struct radix_tree_root *root) /* * We don't need rcu_assign_pointer(), since we are simply - * moving the node from one part of the tree to another. If - * it was safe to dereference the old pointer to it + * moving the node from one part of the tree to another: if it + * was safe to dereference the old pointer to it * (to_free->slots[0]), it will be safe to dereference the new - * one (root->rnode). + * one (root->rnode) as far as dependent read barriers go. */ newptr = to_free->slots[0]; if (root->height > 1) - newptr = radix_tree_ptr_to_indirect(newptr); + newptr = ptr_to_indirect(newptr); root->rnode = newptr; root->height--; + + /* + * We have a dilemma here. The node's slot[0] must not be + * NULLed in case there are concurrent lookups expecting to + * find the item. However if this was a bottom-level node, + * then it may be subject to the slot pointer being visible + * to callers dereferencing it. If item corresponding to + * slot[0] is subsequently deleted, these callers would expect + * their slot to become empty sooner or later. + * + * For example, lockless pagecache will look up a slot, deref + * the page pointer, and if the page is 0 refcount it means it + * was concurrently deleted from pagecache so try the deref + * again. Fortunately there is already a requirement for logic + * to retry the entire slot lookup -- the indirect pointer + * problem (replacing direct root node with an indirect pointer + * also results in a stale slot). So tag the slot as indirect + * to force callers to retry. + */ + if (root->height == 0) + *((unsigned long *)&to_free->slots[0]) |= + RADIX_TREE_INDIRECT_PTR; + radix_tree_node_free(to_free); } } @@ -1254,7 +1288,7 @@ void *radix_tree_delete(struct radix_tree_root *root, unsigned long index) root->rnode = NULL; goto out; } - slot = radix_tree_indirect_to_ptr(slot); + slot = indirect_to_ptr(slot); shift = (height - 1) * RADIX_TREE_MAP_SHIFT; pathp->node = NULL; @@ -1296,8 +1330,7 @@ void *radix_tree_delete(struct radix_tree_root *root, unsigned long index) radix_tree_node_free(to_free); if (pathp->node->count) { - if (pathp->node == - radix_tree_indirect_to_ptr(root->rnode)) + if (pathp->node == indirect_to_ptr(root->rnode)) radix_tree_shrink(root); goto out; } diff --git a/mm/filemap.c b/mm/filemap.c index 4ee2e998e937..ea89840fc65f 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -644,7 +644,9 @@ repeat: pagep = radix_tree_lookup_slot(&mapping->page_tree, offset); if (pagep) { page = radix_tree_deref_slot(pagep); - if (unlikely(!page || page == RADIX_TREE_RETRY)) + if (unlikely(!page)) + goto out; + if (radix_tree_deref_retry(page)) goto repeat; if (!page_cache_get_speculative(page)) @@ -660,6 +662,7 @@ repeat: goto repeat; } } +out: rcu_read_unlock(); return page; @@ -777,12 +780,11 @@ repeat: page = radix_tree_deref_slot((void **)pages[i]); if (unlikely(!page)) continue; - /* - * this can only trigger if nr_found == 1, making livelock - * a non issue. - */ - if (unlikely(page == RADIX_TREE_RETRY)) + if (radix_tree_deref_retry(page)) { + if (ret) + start = pages[ret-1]->index; goto restart; + } if (!page_cache_get_speculative(page)) goto repeat; @@ -830,11 +832,7 @@ repeat: page = radix_tree_deref_slot((void **)pages[i]); if (unlikely(!page)) continue; - /* - * this can only trigger if nr_found == 1, making livelock - * a non issue. - */ - if (unlikely(page == RADIX_TREE_RETRY)) + if (radix_tree_deref_retry(page)) goto restart; if (page->mapping == NULL || page->index != index) @@ -887,11 +885,7 @@ repeat: page = radix_tree_deref_slot((void **)pages[i]); if (unlikely(!page)) continue; - /* - * this can only trigger if nr_found == 1, making livelock - * a non issue. - */ - if (unlikely(page == RADIX_TREE_RETRY)) + if (radix_tree_deref_retry(page)) goto restart; if (!page_cache_get_speculative(page)) -- cgit v1.2.3 From 5ada28bf76752e33dce3d807bf0dfbe6d1b943ad Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 11 Nov 2010 14:05:21 -0800 Subject: led-class: always implement blinking Currently, blinking LEDs can be awkward because it is not guaranteed that all LEDs implement blinking. The trigger that wants it to blink then needs to implement its own timer solution. Rather than require that, add led_blink_set() API that triggers can use. This function will attempt to use hw blinking, but if that fails implements a timer for it. To stop blinking again, brightness_set() also needs to be wrapped into API that will stop the software blink. As a result of this, the timer trigger becomes a very trivial one, and hopefully we can finally see triggers using blinking as well because it's always easy to use. Signed-off-by: Johannes Berg Acked-by: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/leds-class.txt | 21 +++--- drivers/leds/Kconfig | 2 +- drivers/leds/led-class.c | 105 +++++++++++++++++++++++++++++- drivers/leds/led-triggers.c | 2 +- drivers/leds/ledtrig-timer.c | 124 +++--------------------------------- drivers/net/wireless/rt2x00/Kconfig | 3 - include/linux/leds.h | 47 ++++++++++++-- 7 files changed, 171 insertions(+), 133 deletions(-) (limited to 'include/linux') diff --git a/Documentation/leds-class.txt b/Documentation/leds-class.txt index 8fd5ca2ae32d..58b266bd1846 100644 --- a/Documentation/leds-class.txt +++ b/Documentation/leds-class.txt @@ -60,15 +60,18 @@ Hardware accelerated blink of LEDs Some LEDs can be programmed to blink without any CPU interaction. To support this feature, a LED driver can optionally implement the -blink_set() function (see ). If implemented, triggers can -attempt to use it before falling back to software timers. The blink_set() -function should return 0 if the blink setting is supported, or -EINVAL -otherwise, which means that LED blinking will be handled by software. - -The blink_set() function should choose a user friendly blinking -value if it is called with *delay_on==0 && *delay_off==0 parameters. In -this case the driver should give back the chosen value through delay_on -and delay_off parameters to the leds subsystem. +blink_set() function (see ). To set an LED to blinking, +however, it is better to use use the API function led_blink_set(), +as it will check and implement software fallback if necessary. + +To turn off blinking again, use the API function led_brightness_set() +as that will not just set the LED brightness but also stop any software +timers that may have been required for blinking. + +The blink_set() function should choose a user friendly blinking value +if it is called with *delay_on==0 && *delay_off==0 parameters. In this +case the driver should give back the chosen value through delay_on and +delay_off parameters to the leds subsystem. Setting the brightness to zero with brightness_set() callback function should completely turn off the LED and cancel the previously programmed diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index cc2a88d5192f..56b4b7a5ff31 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -10,7 +10,7 @@ menuconfig NEW_LEDS if NEW_LEDS config LEDS_CLASS - tristate "LED Class Support" + bool "LED Class Support" help This option enables the led sysfs class in /sys/class/leds. You'll need this to do anything useful with LEDs. If unsure, say N. diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c index 260660076507..211e21f34bd5 100644 --- a/drivers/leds/led-class.c +++ b/drivers/leds/led-class.c @@ -81,6 +81,79 @@ static struct device_attribute led_class_attrs[] = { __ATTR_NULL, }; +static void led_timer_function(unsigned long data) +{ + struct led_classdev *led_cdev = (void *)data; + unsigned long brightness; + unsigned long delay; + + if (!led_cdev->blink_delay_on || !led_cdev->blink_delay_off) { + led_set_brightness(led_cdev, LED_OFF); + return; + } + + brightness = led_get_brightness(led_cdev); + if (!brightness) { + /* Time to switch the LED on. */ + brightness = led_cdev->blink_brightness; + delay = led_cdev->blink_delay_on; + } else { + /* Store the current brightness value to be able + * to restore it when the delay_off period is over. + */ + led_cdev->blink_brightness = brightness; + brightness = LED_OFF; + delay = led_cdev->blink_delay_off; + } + + led_set_brightness(led_cdev, brightness); + + mod_timer(&led_cdev->blink_timer, jiffies + msecs_to_jiffies(delay)); +} + +static void led_stop_software_blink(struct led_classdev *led_cdev) +{ + /* deactivate previous settings */ + del_timer_sync(&led_cdev->blink_timer); + led_cdev->blink_delay_on = 0; + led_cdev->blink_delay_off = 0; +} + +static void led_set_software_blink(struct led_classdev *led_cdev, + unsigned long delay_on, + unsigned long delay_off) +{ + int current_brightness; + + current_brightness = led_get_brightness(led_cdev); + if (current_brightness) + led_cdev->blink_brightness = current_brightness; + if (!led_cdev->blink_brightness) + led_cdev->blink_brightness = led_cdev->max_brightness; + + if (delay_on == led_cdev->blink_delay_on && + delay_off == led_cdev->blink_delay_off) + return; + + led_stop_software_blink(led_cdev); + + led_cdev->blink_delay_on = delay_on; + led_cdev->blink_delay_off = delay_off; + + /* never on - don't blink */ + if (!delay_on) + return; + + /* never off - just set to brightness */ + if (!delay_off) { + led_set_brightness(led_cdev, led_cdev->blink_brightness); + return; + } + + mod_timer(&led_cdev->blink_timer, jiffies + 1); +} + + /** * led_classdev_suspend - suspend an led_classdev. * @led_cdev: the led_classdev to suspend. @@ -148,6 +221,10 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev) led_update_brightness(led_cdev); + init_timer(&led_cdev->blink_timer); + led_cdev->blink_timer.function = led_timer_function; + led_cdev->blink_timer.data = (unsigned long)led_cdev; + #ifdef CONFIG_LEDS_TRIGGERS led_trigger_set_default(led_cdev); #endif @@ -157,7 +234,6 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev) return 0; } - EXPORT_SYMBOL_GPL(led_classdev_register); /** @@ -175,6 +251,9 @@ void led_classdev_unregister(struct led_classdev *led_cdev) up_write(&led_cdev->trigger_lock); #endif + /* Stop blinking */ + led_brightness_set(led_cdev, LED_OFF); + device_unregister(led_cdev->dev); down_write(&leds_list_lock); @@ -183,6 +262,30 @@ void led_classdev_unregister(struct led_classdev *led_cdev) } EXPORT_SYMBOL_GPL(led_classdev_unregister); +void led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + if (led_cdev->blink_set && + led_cdev->blink_set(led_cdev, delay_on, delay_off)) + return; + + /* blink with 1 Hz as default if nothing specified */ + if (!*delay_on && !*delay_off) + *delay_on = *delay_off = 500; + + led_set_software_blink(led_cdev, *delay_on, *delay_off); +} +EXPORT_SYMBOL(led_blink_set); + +void led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + led_stop_software_blink(led_cdev); + led_cdev->brightness_set(led_cdev, brightness); +} +EXPORT_SYMBOL(led_brightness_set); + static int __init leds_init(void) { leds_class = class_create(THIS_MODULE, "leds"); diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c index f1c00db88b5e..c41eb6180c9c 100644 --- a/drivers/leds/led-triggers.c +++ b/drivers/leds/led-triggers.c @@ -113,7 +113,7 @@ void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trigger) if (led_cdev->trigger->deactivate) led_cdev->trigger->deactivate(led_cdev); led_cdev->trigger = NULL; - led_set_brightness(led_cdev, LED_OFF); + led_brightness_set(led_cdev, LED_OFF); } if (trigger) { write_lock_irqsave(&trigger->leddev_list_lock, flags); diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c index 82b77bd482ff..b09bcbeade9c 100644 --- a/drivers/leds/ledtrig-timer.c +++ b/drivers/leds/ledtrig-timer.c @@ -12,73 +12,25 @@ */ #include -#include #include #include -#include -#include #include -#include -#include #include #include -#include #include "leds.h" -struct timer_trig_data { - int brightness_on; /* LED brightness during "on" period. - * (LED_OFF < brightness_on <= LED_FULL) - */ - unsigned long delay_on; /* milliseconds on */ - unsigned long delay_off; /* milliseconds off */ - struct timer_list timer; -}; - -static void led_timer_function(unsigned long data) -{ - struct led_classdev *led_cdev = (struct led_classdev *) data; - struct timer_trig_data *timer_data = led_cdev->trigger_data; - unsigned long brightness; - unsigned long delay; - - if (!timer_data->delay_on || !timer_data->delay_off) { - led_set_brightness(led_cdev, LED_OFF); - return; - } - - brightness = led_get_brightness(led_cdev); - if (!brightness) { - /* Time to switch the LED on. */ - brightness = timer_data->brightness_on; - delay = timer_data->delay_on; - } else { - /* Store the current brightness value to be able - * to restore it when the delay_off period is over. - */ - timer_data->brightness_on = brightness; - brightness = LED_OFF; - delay = timer_data->delay_off; - } - - led_set_brightness(led_cdev, brightness); - - mod_timer(&timer_data->timer, jiffies + msecs_to_jiffies(delay)); -} - static ssize_t led_delay_on_show(struct device *dev, struct device_attribute *attr, char *buf) { struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct timer_trig_data *timer_data = led_cdev->trigger_data; - return sprintf(buf, "%lu\n", timer_data->delay_on); + return sprintf(buf, "%lu\n", led_cdev->blink_delay_on); } static ssize_t led_delay_on_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) { struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct timer_trig_data *timer_data = led_cdev->trigger_data; int ret = -EINVAL; char *after; unsigned long state = simple_strtoul(buf, &after, 10); @@ -88,21 +40,7 @@ static ssize_t led_delay_on_store(struct device *dev, count++; if (count == size) { - if (timer_data->delay_on != state) { - /* the new value differs from the previous */ - timer_data->delay_on = state; - - /* deactivate previous settings */ - del_timer_sync(&timer_data->timer); - - /* try to activate hardware acceleration, if any */ - if (!led_cdev->blink_set || - led_cdev->blink_set(led_cdev, - &timer_data->delay_on, &timer_data->delay_off)) { - /* no hardware acceleration, blink via timer */ - mod_timer(&timer_data->timer, jiffies + 1); - } - } + led_blink_set(led_cdev, &state, &led_cdev->blink_delay_off); ret = count; } @@ -113,16 +51,14 @@ static ssize_t led_delay_off_show(struct device *dev, struct device_attribute *attr, char *buf) { struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct timer_trig_data *timer_data = led_cdev->trigger_data; - return sprintf(buf, "%lu\n", timer_data->delay_off); + return sprintf(buf, "%lu\n", led_cdev->blink_delay_off); } static ssize_t led_delay_off_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) { struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct timer_trig_data *timer_data = led_cdev->trigger_data; int ret = -EINVAL; char *after; unsigned long state = simple_strtoul(buf, &after, 10); @@ -132,21 +68,7 @@ static ssize_t led_delay_off_store(struct device *dev, count++; if (count == size) { - if (timer_data->delay_off != state) { - /* the new value differs from the previous */ - timer_data->delay_off = state; - - /* deactivate previous settings */ - del_timer_sync(&timer_data->timer); - - /* try to activate hardware acceleration, if any */ - if (!led_cdev->blink_set || - led_cdev->blink_set(led_cdev, - &timer_data->delay_on, &timer_data->delay_off)) { - /* no hardware acceleration, blink via timer */ - mod_timer(&timer_data->timer, jiffies + 1); - } - } + led_blink_set(led_cdev, &led_cdev->blink_delay_on, &state); ret = count; } @@ -158,60 +80,34 @@ static DEVICE_ATTR(delay_off, 0644, led_delay_off_show, led_delay_off_store); static void timer_trig_activate(struct led_classdev *led_cdev) { - struct timer_trig_data *timer_data; int rc; - timer_data = kzalloc(sizeof(struct timer_trig_data), GFP_KERNEL); - if (!timer_data) - return; - - timer_data->brightness_on = led_get_brightness(led_cdev); - if (timer_data->brightness_on == LED_OFF) - timer_data->brightness_on = led_cdev->max_brightness; - led_cdev->trigger_data = timer_data; - - init_timer(&timer_data->timer); - timer_data->timer.function = led_timer_function; - timer_data->timer.data = (unsigned long) led_cdev; + led_cdev->trigger_data = NULL; rc = device_create_file(led_cdev->dev, &dev_attr_delay_on); if (rc) - goto err_out; + return; rc = device_create_file(led_cdev->dev, &dev_attr_delay_off); if (rc) goto err_out_delayon; - /* If there is hardware support for blinking, start one - * user friendly blink rate chosen by the driver. - */ - if (led_cdev->blink_set) - led_cdev->blink_set(led_cdev, - &timer_data->delay_on, &timer_data->delay_off); + led_cdev->trigger_data = (void *)1; return; err_out_delayon: device_remove_file(led_cdev->dev, &dev_attr_delay_on); -err_out: - led_cdev->trigger_data = NULL; - kfree(timer_data); } static void timer_trig_deactivate(struct led_classdev *led_cdev) { - struct timer_trig_data *timer_data = led_cdev->trigger_data; - unsigned long on = 0, off = 0; - - if (timer_data) { + if (led_cdev->trigger_data) { device_remove_file(led_cdev->dev, &dev_attr_delay_on); device_remove_file(led_cdev->dev, &dev_attr_delay_off); - del_timer_sync(&timer_data->timer); - kfree(timer_data); } - /* If there is hardware support for blinking, stop it */ - if (led_cdev->blink_set) - led_cdev->blink_set(led_cdev, &on, &off); + /* Stop blinking */ + led_brightness_set(led_cdev, LED_OFF); } static struct led_trigger timer_led_trigger = { diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index eea1ef2f502b..4396d4b9bfb9 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -221,9 +221,6 @@ config RT2X00_LIB_LEDS boolean default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n) -comment "rt2x00 leds support disabled due to modularized LEDS_CLASS and built-in rt2x00" - depends on RT2X00_LIB=y && LEDS_CLASS=m - config RT2X00_LIB_DEBUGFS bool "Ralink debugfs support" depends on RT2X00_LIB && MAC80211_DEBUGFS diff --git a/include/linux/leds.h b/include/linux/leds.h index ba6986a11663..0f19df9e37b0 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -15,6 +15,7 @@ #include #include #include +#include struct device; /* @@ -45,10 +46,14 @@ struct led_classdev { /* Get LED brightness level */ enum led_brightness (*brightness_get)(struct led_classdev *led_cdev); - /* Activate hardware accelerated blink, delays are in - * miliseconds and if none is provided then a sensible default - * should be chosen. The call can adjust the timings if it can't - * match the values specified exactly. */ + /* + * Activate hardware accelerated blink, delays are in milliseconds + * and if both are zero then a sensible default should be chosen. + * The call should adjust the timings in that case and if it can't + * match the values specified exactly. + * Deactivate blinking again when the brightness is set to a fixed + * value via the brightness_set() callback. + */ int (*blink_set)(struct led_classdev *led_cdev, unsigned long *delay_on, unsigned long *delay_off); @@ -57,6 +62,10 @@ struct led_classdev { struct list_head node; /* LED Device list */ const char *default_trigger; /* Trigger to use */ + unsigned long blink_delay_on, blink_delay_off; + struct timer_list blink_timer; + int blink_brightness; + #ifdef CONFIG_LEDS_TRIGGERS /* Protects the trigger data below */ struct rw_semaphore trigger_lock; @@ -73,6 +82,36 @@ extern void led_classdev_unregister(struct led_classdev *led_cdev); extern void led_classdev_suspend(struct led_classdev *led_cdev); extern void led_classdev_resume(struct led_classdev *led_cdev); +/** + * led_blink_set - set blinking with software fallback + * @led_cdev: the LED to start blinking + * @delay_on: the time it should be on (in ms) + * @delay_off: the time it should ble off (in ms) + * + * This function makes the LED blink, attempting to use the + * hardware acceleration if possible, but falling back to + * software blinking if there is no hardware blinking or if + * the LED refuses the passed values. + * + * Note that if software blinking is active, simply calling + * led_cdev->brightness_set() will not stop the blinking, + * use led_classdev_brightness_set() instead. + */ +extern void led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off); +/** + * led_brightness_set - set LED brightness + * @led_cdev: the LED to set + * @brightness: the brightness to set it to + * + * Set an LED's brightness, and, if necessary, cancel the + * software blink timer that implements blinking when the + * hardware doesn't. + */ +extern void led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness); + /* * LED Triggers */ -- cgit v1.2.3 From 500fe141367e5291257e809c12f95ea54181e96d Mon Sep 17 00:00:00 2001 From: Samu Onkalo Date: Thu, 11 Nov 2010 14:05:22 -0800 Subject: leds: driver for National Semiconductor LP5521 chip This patchset provides support for LP5521 and LP5523 LED driver chips from National Semicondutor. Both drivers supports programmable engines and naturally LED class features. Documentation is provided as a part of the patchset. I created "leds" subdirectory under Documentation. Perhaps the rest of the leds* documentation should be moved there. Datasheets are freely available at National Semiconductor www pages. This patch: LP5521 chip is three channel led driver with programmable engines. Driver provides support for that chip for direct access via led class or via programmable engines. Signed-off-by: Samu Onkalo Cc: Richard Purdie Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/leds-lp5521.c | 821 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/leds-lp5521.h | 47 +++ 2 files changed, 868 insertions(+) create mode 100644 drivers/leds/leds-lp5521.c create mode 100644 include/linux/leds-lp5521.h (limited to 'include/linux') diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c new file mode 100644 index 000000000000..3782f31f06d2 --- /dev/null +++ b/drivers/leds/leds-lp5521.c @@ -0,0 +1,821 @@ +/* + * LP5521 LED chip driver. + * + * Copyright (C) 2010 Nokia Corporation + * + * Contact: Samu Onkalo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define LP5521_PROGRAM_LENGTH 32 /* in bytes */ + +#define LP5521_MAX_LEDS 3 /* Maximum number of LEDs */ +#define LP5521_MAX_ENGINES 3 /* Maximum number of engines */ + +#define LP5521_ENG_MASK_BASE 0x30 /* 00110000 */ +#define LP5521_ENG_STATUS_MASK 0x07 /* 00000111 */ + +#define LP5521_CMD_LOAD 0x15 /* 00010101 */ +#define LP5521_CMD_RUN 0x2a /* 00101010 */ +#define LP5521_CMD_DIRECT 0x3f /* 00111111 */ +#define LP5521_CMD_DISABLED 0x00 /* 00000000 */ + +/* Registers */ +#define LP5521_REG_ENABLE 0x00 +#define LP5521_REG_OP_MODE 0x01 +#define LP5521_REG_R_PWM 0x02 +#define LP5521_REG_G_PWM 0x03 +#define LP5521_REG_B_PWM 0x04 +#define LP5521_REG_R_CURRENT 0x05 +#define LP5521_REG_G_CURRENT 0x06 +#define LP5521_REG_B_CURRENT 0x07 +#define LP5521_REG_CONFIG 0x08 +#define LP5521_REG_R_CHANNEL_PC 0x09 +#define LP5521_REG_G_CHANNEL_PC 0x0A +#define LP5521_REG_B_CHANNEL_PC 0x0B +#define LP5521_REG_STATUS 0x0C +#define LP5521_REG_RESET 0x0D +#define LP5521_REG_GPO 0x0E +#define LP5521_REG_R_PROG_MEM 0x10 +#define LP5521_REG_G_PROG_MEM 0x30 +#define LP5521_REG_B_PROG_MEM 0x50 + +#define LP5521_PROG_MEM_BASE LP5521_REG_R_PROG_MEM +#define LP5521_PROG_MEM_SIZE 0x20 + +/* Base register to set LED current */ +#define LP5521_REG_LED_CURRENT_BASE LP5521_REG_R_CURRENT + +/* Base register to set the brightness */ +#define LP5521_REG_LED_PWM_BASE LP5521_REG_R_PWM + +/* Bits in ENABLE register */ +#define LP5521_MASTER_ENABLE 0x40 /* Chip master enable */ +#define LP5521_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */ +#define LP5521_EXEC_RUN 0x2A + +/* Bits in CONFIG register */ +#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */ +#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */ +#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */ +#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */ +#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */ +#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */ +#define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */ +#define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K) */ +#define LP5521_CLK_INT 1 /* Internal clock */ +#define LP5521_CLK_AUTO 2 /* Automatic clock selection */ + +/* Status */ +#define LP5521_EXT_CLK_USED 0x08 + +struct lp5521_engine { + const struct attribute_group *attributes; + int id; + u8 mode; + u8 prog_page; + u8 engine_mask; +}; + +struct lp5521_led { + int id; + u8 chan_nr; + u8 led_current; + u8 max_current; + struct led_classdev cdev; + struct work_struct brightness_work; + u8 brightness; +}; + +struct lp5521_chip { + struct lp5521_platform_data *pdata; + struct mutex lock; /* Serialize control */ + struct i2c_client *client; + struct lp5521_engine engines[LP5521_MAX_ENGINES]; + struct lp5521_led leds[LP5521_MAX_LEDS]; + u8 num_channels; + u8 num_leds; +}; + +#define cdev_to_led(c) container_of(c, struct lp5521_led, cdev) +#define engine_to_lp5521(eng) container_of((eng), struct lp5521_chip, \ + engines[(eng)->id - 1]) +#define led_to_lp5521(led) container_of((led), struct lp5521_chip, \ + leds[(led)->id]) + +static void lp5521_led_brightness_work(struct work_struct *work); + +static inline int lp5521_write(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int lp5521_read(struct i2c_client *client, u8 reg, u8 *buf) +{ + s32 ret; + + ret = i2c_smbus_read_byte_data(client, reg); + if (ret < 0) + return -EIO; + + *buf = ret; + return 0; +} + +static int lp5521_set_engine_mode(struct lp5521_engine *engine, u8 mode) +{ + struct lp5521_chip *chip = engine_to_lp5521(engine); + struct i2c_client *client = chip->client; + int ret; + u8 engine_state; + + /* Only transition between RUN and DIRECT mode are handled here */ + if (mode == LP5521_CMD_LOAD) + return 0; + + if (mode == LP5521_CMD_DISABLED) + mode = LP5521_CMD_DIRECT; + + ret = lp5521_read(client, LP5521_REG_OP_MODE, &engine_state); + + /* set mode only for this engine */ + engine_state &= ~(engine->engine_mask); + mode &= engine->engine_mask; + engine_state |= mode; + ret |= lp5521_write(client, LP5521_REG_OP_MODE, engine_state); + + return ret; +} + +static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern) +{ + struct lp5521_chip *chip = engine_to_lp5521(eng); + struct i2c_client *client = chip->client; + int ret; + int addr; + u8 mode; + + /* move current engine to direct mode and remember the state */ + ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT); + usleep_range(1000, 10000); + ret |= lp5521_read(client, LP5521_REG_OP_MODE, &mode); + + /* For loading, all the engines to load mode */ + lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); + usleep_range(1000, 10000); + lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD); + usleep_range(1000, 10000); + + addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE; + i2c_smbus_write_i2c_block_data(client, + addr, + LP5521_PROG_MEM_SIZE, + pattern); + + ret |= lp5521_write(client, LP5521_REG_OP_MODE, mode); + return ret; +} + +static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr) +{ + return lp5521_write(chip->client, + LP5521_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr, + curr); +} + +static void lp5521_init_engine(struct lp5521_chip *chip, + const struct attribute_group *attr_group) +{ + int i; + for (i = 0; i < ARRAY_SIZE(chip->engines); i++) { + chip->engines[i].id = i + 1; + chip->engines[i].engine_mask = LP5521_ENG_MASK_BASE >> (i * 2); + chip->engines[i].prog_page = i; + chip->engines[i].attributes = &attr_group[i]; + } +} + +static int lp5521_configure(struct i2c_client *client, + const struct attribute_group *attr_group) +{ + struct lp5521_chip *chip = i2c_get_clientdata(client); + int ret; + + lp5521_init_engine(chip, attr_group); + + lp5521_write(client, LP5521_REG_RESET, 0xff); + + usleep_range(10000, 20000); + + /* Set all PWMs to direct control mode */ + ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F); + + /* Enable auto-powersave, set charge pump to auto, red to battery */ + ret |= lp5521_write(client, LP5521_REG_CONFIG, + LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT); + + /* Initialize all channels PWM to zero -> leds off */ + ret |= lp5521_write(client, LP5521_REG_R_PWM, 0); + ret |= lp5521_write(client, LP5521_REG_G_PWM, 0); + ret |= lp5521_write(client, LP5521_REG_B_PWM, 0); + + /* Set engines are set to run state when OP_MODE enables engines */ + ret |= lp5521_write(client, LP5521_REG_ENABLE, + LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM | + LP5521_EXEC_RUN); + /* enable takes 500us */ + usleep_range(500, 20000); + + return ret; +} + +static int lp5521_run_selftest(struct lp5521_chip *chip, char *buf) +{ + int ret; + u8 status; + + ret = lp5521_read(chip->client, LP5521_REG_STATUS, &status); + if (ret < 0) + return ret; + + /* Check that ext clock is really in use if requested */ + if (chip->pdata && chip->pdata->clock_mode == LP5521_CLOCK_EXT) + if ((status & LP5521_EXT_CLK_USED) == 0) + return -EIO; + return 0; +} + +static void lp5521_set_brightness(struct led_classdev *cdev, + enum led_brightness brightness) +{ + struct lp5521_led *led = cdev_to_led(cdev); + led->brightness = (u8)brightness; + schedule_work(&led->brightness_work); +} + +static void lp5521_led_brightness_work(struct work_struct *work) +{ + struct lp5521_led *led = container_of(work, + struct lp5521_led, + brightness_work); + struct lp5521_chip *chip = led_to_lp5521(led); + struct i2c_client *client = chip->client; + + mutex_lock(&chip->lock); + lp5521_write(client, LP5521_REG_LED_PWM_BASE + led->chan_nr, + led->brightness); + mutex_unlock(&chip->lock); +} + +/* Detect the chip by setting its ENABLE register and reading it back. */ +static int lp5521_detect(struct i2c_client *client) +{ + int ret; + u8 buf; + + ret = lp5521_write(client, LP5521_REG_ENABLE, + LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM); + if (ret) + return ret; + usleep_range(1000, 10000); + ret = lp5521_read(client, LP5521_REG_ENABLE, &buf); + if (ret) + return ret; + if (buf != (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM)) + return -ENODEV; + + return 0; +} + +/* Set engine mode and create appropriate sysfs attributes, if required. */ +static int lp5521_set_mode(struct lp5521_engine *engine, u8 mode) +{ + struct lp5521_chip *chip = engine_to_lp5521(engine); + struct i2c_client *client = chip->client; + struct device *dev = &client->dev; + int ret = 0; + + /* if in that mode already do nothing, except for run */ + if (mode == engine->mode && mode != LP5521_CMD_RUN) + return 0; + + if (mode == LP5521_CMD_RUN) { + ret = lp5521_set_engine_mode(engine, LP5521_CMD_RUN); + } else if (mode == LP5521_CMD_LOAD) { + lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); + lp5521_set_engine_mode(engine, LP5521_CMD_LOAD); + + ret = sysfs_create_group(&dev->kobj, engine->attributes); + if (ret) + return ret; + } else if (mode == LP5521_CMD_DISABLED) { + lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); + } + + /* remove load attribute from sysfs if not in load mode */ + if (engine->mode == LP5521_CMD_LOAD && mode != LP5521_CMD_LOAD) + sysfs_remove_group(&dev->kobj, engine->attributes); + + engine->mode = mode; + + return ret; +} + +static int lp5521_do_store_load(struct lp5521_engine *engine, + const char *buf, size_t len) +{ + struct lp5521_chip *chip = engine_to_lp5521(engine); + struct i2c_client *client = chip->client; + int ret, nrchars, offset = 0, i = 0; + char c[3]; + unsigned cmd; + u8 pattern[LP5521_PROGRAM_LENGTH] = {0}; + + while ((offset < len - 1) && (i < LP5521_PROGRAM_LENGTH)) { + /* separate sscanfs because length is working only for %s */ + ret = sscanf(buf + offset, "%2s%n ", c, &nrchars); + ret = sscanf(c, "%2x", &cmd); + if (ret != 1) + goto fail; + pattern[i] = (u8)cmd; + + offset += nrchars; + i++; + } + + /* Each instruction is 16bit long. Check that length is even */ + if (i % 2) + goto fail; + + mutex_lock(&chip->lock); + ret = lp5521_load_program(engine, pattern); + mutex_unlock(&chip->lock); + + if (ret) { + dev_err(&client->dev, "failed loading pattern\n"); + return ret; + } + + return len; +fail: + dev_err(&client->dev, "wrong pattern format\n"); + return -EINVAL; +} + +static ssize_t store_engine_load(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5521_chip *chip = i2c_get_clientdata(client); + return lp5521_do_store_load(&chip->engines[nr - 1], buf, len); +} + +#define store_load(nr) \ +static ssize_t store_engine##nr##_load(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t len) \ +{ \ + return store_engine_load(dev, attr, buf, len, nr); \ +} +store_load(1) +store_load(2) +store_load(3) + +static ssize_t show_engine_mode(struct device *dev, + struct device_attribute *attr, + char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5521_chip *chip = i2c_get_clientdata(client); + switch (chip->engines[nr - 1].mode) { + case LP5521_CMD_RUN: + return sprintf(buf, "run\n"); + case LP5521_CMD_LOAD: + return sprintf(buf, "load\n"); + case LP5521_CMD_DISABLED: + return sprintf(buf, "disabled\n"); + default: + return sprintf(buf, "disabled\n"); + } +} + +#define show_mode(nr) \ +static ssize_t show_engine##nr##_mode(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + return show_engine_mode(dev, attr, buf, nr); \ +} +show_mode(1) +show_mode(2) +show_mode(3) + +static ssize_t store_engine_mode(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5521_chip *chip = i2c_get_clientdata(client); + struct lp5521_engine *engine = &chip->engines[nr - 1]; + mutex_lock(&chip->lock); + + if (!strncmp(buf, "run", 3)) + lp5521_set_mode(engine, LP5521_CMD_RUN); + else if (!strncmp(buf, "load", 4)) + lp5521_set_mode(engine, LP5521_CMD_LOAD); + else if (!strncmp(buf, "disabled", 8)) + lp5521_set_mode(engine, LP5521_CMD_DISABLED); + + mutex_unlock(&chip->lock); + return len; +} + +#define store_mode(nr) \ +static ssize_t store_engine##nr##_mode(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t len) \ +{ \ + return store_engine_mode(dev, attr, buf, len, nr); \ +} +store_mode(1) +store_mode(2) +store_mode(3) + +static ssize_t show_max_current(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lp5521_led *led = cdev_to_led(led_cdev); + + return sprintf(buf, "%d\n", led->max_current); +} + +static ssize_t show_current(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lp5521_led *led = cdev_to_led(led_cdev); + + return sprintf(buf, "%d\n", led->led_current); +} + +static ssize_t store_current(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lp5521_led *led = cdev_to_led(led_cdev); + struct lp5521_chip *chip = led_to_lp5521(led); + ssize_t ret; + unsigned long curr; + + if (strict_strtoul(buf, 0, &curr)) + return -EINVAL; + + if (curr > led->max_current) + return -EINVAL; + + mutex_lock(&chip->lock); + ret = lp5521_set_led_current(chip, led->id, curr); + mutex_unlock(&chip->lock); + + if (ret < 0) + return ret; + + led->led_current = (u8)curr; + + return len; +} + +static ssize_t lp5521_selftest(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5521_chip *chip = i2c_get_clientdata(client); + int ret; + + mutex_lock(&chip->lock); + ret = lp5521_run_selftest(chip, buf); + mutex_unlock(&chip->lock); + return sprintf(buf, "%s\n", ret ? "FAIL" : "OK"); +} + +/* led class device attributes */ +static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current); +static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL); + +static struct attribute *lp5521_led_attributes[] = { + &dev_attr_led_current.attr, + &dev_attr_max_current.attr, + NULL, +}; + +static struct attribute_group lp5521_led_attribute_group = { + .attrs = lp5521_led_attributes +}; + +/* device attributes */ +static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO, + show_engine1_mode, store_engine1_mode); +static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO, + show_engine2_mode, store_engine2_mode); +static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO, + show_engine3_mode, store_engine3_mode); +static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load); +static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load); +static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load); +static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL); + +static struct attribute *lp5521_attributes[] = { + &dev_attr_engine1_mode.attr, + &dev_attr_engine2_mode.attr, + &dev_attr_engine3_mode.attr, + &dev_attr_selftest.attr, + NULL +}; + +static struct attribute *lp5521_engine1_attributes[] = { + &dev_attr_engine1_load.attr, + NULL +}; + +static struct attribute *lp5521_engine2_attributes[] = { + &dev_attr_engine2_load.attr, + NULL +}; + +static struct attribute *lp5521_engine3_attributes[] = { + &dev_attr_engine3_load.attr, + NULL +}; + +static const struct attribute_group lp5521_group = { + .attrs = lp5521_attributes, +}; + +static const struct attribute_group lp5521_engine_group[] = { + {.attrs = lp5521_engine1_attributes }, + {.attrs = lp5521_engine2_attributes }, + {.attrs = lp5521_engine3_attributes }, +}; + +static int lp5521_register_sysfs(struct i2c_client *client) +{ + struct device *dev = &client->dev; + return sysfs_create_group(&dev->kobj, &lp5521_group); +} + +static void lp5521_unregister_sysfs(struct i2c_client *client) +{ + struct lp5521_chip *chip = i2c_get_clientdata(client); + struct device *dev = &client->dev; + int i; + + sysfs_remove_group(&dev->kobj, &lp5521_group); + + for (i = 0; i < ARRAY_SIZE(chip->engines); i++) { + if (chip->engines[i].mode == LP5521_CMD_LOAD) + sysfs_remove_group(&dev->kobj, + chip->engines[i].attributes); + } + + for (i = 0; i < chip->num_leds; i++) + sysfs_remove_group(&chip->leds[i].cdev.dev->kobj, + &lp5521_led_attribute_group); +} + +static int __init lp5521_init_led(struct lp5521_led *led, + struct i2c_client *client, + int chan, struct lp5521_platform_data *pdata) +{ + struct device *dev = &client->dev; + char name[32]; + int res; + + if (chan >= LP5521_MAX_LEDS) + return -EINVAL; + + if (pdata->led_config[chan].led_current == 0) + return 0; + + led->led_current = pdata->led_config[chan].led_current; + led->max_current = pdata->led_config[chan].max_current; + led->chan_nr = pdata->led_config[chan].chan_nr; + + if (led->chan_nr >= LP5521_MAX_LEDS) { + dev_err(dev, "Use channel numbers between 0 and %d\n", + LP5521_MAX_LEDS - 1); + return -EINVAL; + } + + snprintf(name, sizeof(name), "%s:channel%d", client->name, chan); + led->cdev.brightness_set = lp5521_set_brightness; + led->cdev.name = name; + res = led_classdev_register(dev, &led->cdev); + if (res < 0) { + dev_err(dev, "couldn't register led on channel %d\n", chan); + return res; + } + + res = sysfs_create_group(&led->cdev.dev->kobj, + &lp5521_led_attribute_group); + if (res < 0) { + dev_err(dev, "couldn't register current attribute\n"); + led_classdev_unregister(&led->cdev); + return res; + } + return 0; +} + +static int lp5521_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lp5521_chip *chip; + struct lp5521_platform_data *pdata; + int ret, i, led; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + i2c_set_clientdata(client, chip); + chip->client = client; + + pdata = client->dev.platform_data; + + if (!pdata) { + dev_err(&client->dev, "no platform data\n"); + ret = -EINVAL; + goto fail1; + } + + mutex_init(&chip->lock); + + chip->pdata = pdata; + + if (pdata->setup_resources) { + ret = pdata->setup_resources(); + if (ret < 0) + goto fail1; + } + + if (pdata->enable) { + pdata->enable(0); + usleep_range(1000, 10000); + pdata->enable(1); + usleep_range(1000, 10000); /* Spec says min 500us */ + } + + ret = lp5521_detect(client); + + if (ret) { + dev_err(&client->dev, "Chip not found\n"); + goto fail2; + } + + dev_info(&client->dev, "%s programmable led chip found\n", id->name); + + ret = lp5521_configure(client, lp5521_engine_group); + if (ret < 0) { + dev_err(&client->dev, "error configuring chip\n"); + goto fail2; + } + + /* Initialize leds */ + chip->num_channels = pdata->num_channels; + chip->num_leds = 0; + led = 0; + for (i = 0; i < pdata->num_channels; i++) { + /* Do not initialize channels that are not connected */ + if (pdata->led_config[i].led_current == 0) + continue; + + ret = lp5521_init_led(&chip->leds[led], client, i, pdata); + if (ret) { + dev_err(&client->dev, "error initializing leds\n"); + goto fail3; + } + chip->num_leds++; + + chip->leds[led].id = led; + /* Set initial LED current */ + lp5521_set_led_current(chip, led, + chip->leds[led].led_current); + + INIT_WORK(&(chip->leds[led].brightness_work), + lp5521_led_brightness_work); + + led++; + } + + ret = lp5521_register_sysfs(client); + if (ret) { + dev_err(&client->dev, "registering sysfs failed\n"); + goto fail3; + } + return ret; +fail3: + for (i = 0; i < chip->num_leds; i++) { + led_classdev_unregister(&chip->leds[i].cdev); + cancel_work_sync(&chip->leds[i].brightness_work); + } +fail2: + if (pdata->enable) + pdata->enable(0); + if (pdata->release_resources) + pdata->release_resources(); +fail1: + kfree(chip); + return ret; +} + +static int lp5521_remove(struct i2c_client *client) +{ + struct lp5521_chip *chip = i2c_get_clientdata(client); + int i; + + lp5521_unregister_sysfs(client); + + for (i = 0; i < chip->num_leds; i++) { + led_classdev_unregister(&chip->leds[i].cdev); + cancel_work_sync(&chip->leds[i].brightness_work); + } + + if (chip->pdata->enable) + chip->pdata->enable(0); + if (chip->pdata->release_resources) + chip->pdata->release_resources(); + kfree(chip); + return 0; +} + +static const struct i2c_device_id lp5521_id[] = { + { "lp5521", 0 }, /* Three channel chip */ + { } +}; +MODULE_DEVICE_TABLE(i2c, lp5521_id); + +static struct i2c_driver lp5521_driver = { + .driver = { + .name = "lp5521", + }, + .probe = lp5521_probe, + .remove = lp5521_remove, + .id_table = lp5521_id, +}; + +static int __init lp5521_init(void) +{ + int ret; + + ret = i2c_add_driver(&lp5521_driver); + + if (ret < 0) + printk(KERN_ALERT "Adding lp5521 driver failed\n"); + + return ret; +} + +static void __exit lp5521_exit(void) +{ + i2c_del_driver(&lp5521_driver); +} + +module_init(lp5521_init); +module_exit(lp5521_exit); + +MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo"); +MODULE_DESCRIPTION("LP5521 LED engine"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/leds-lp5521.h b/include/linux/leds-lp5521.h new file mode 100644 index 000000000000..38368d785f08 --- /dev/null +++ b/include/linux/leds-lp5521.h @@ -0,0 +1,47 @@ +/* + * LP5521 LED chip driver. + * + * Copyright (C) 2010 Nokia Corporation + * + * Contact: Samu Onkalo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __LINUX_LP5521_H +#define __LINUX_LP5521_H + +/* See Documentation/leds/leds-lp5521.txt */ + +struct lp5521_led_config { + u8 chan_nr; + u8 led_current; /* mA x10, 0 if led is not connected */ + u8 max_current; +}; + +#define LP5521_CLOCK_AUTO 0 +#define LP5521_CLOCK_INT 1 +#define LP5521_CLOCK_EXT 2 + +struct lp5521_platform_data { + struct lp5521_led_config *led_config; + u8 num_channels; + u8 clock_mode; + int (*setup_resources)(void); + void (*release_resources)(void); + void (*enable)(bool state); +}; + +#endif /* __LINUX_LP5521_H */ -- cgit v1.2.3 From 0efba16cc05bfe1f80471886c7a888a4744138cf Mon Sep 17 00:00:00 2001 From: Samu Onkalo Date: Thu, 11 Nov 2010 14:05:22 -0800 Subject: leds: driver for National Semiconductors LP5523 chip LP5523 chip is nine channel led driver with programmable engines. Driver provides support for that chip for direct access via led class or via programmable engines. Signed-off-by: Samu Onkalo Cc: Richard Purdie Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/leds-lp5523.c | 1065 +++++++++++++++++++++++++++++++++++++++++++ include/linux/leds-lp5523.h | 47 ++ 2 files changed, 1112 insertions(+) create mode 100644 drivers/leds/leds-lp5523.c create mode 100644 include/linux/leds-lp5523.h (limited to 'include/linux') diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c new file mode 100644 index 000000000000..1e11fcc08b28 --- /dev/null +++ b/drivers/leds/leds-lp5523.c @@ -0,0 +1,1065 @@ +/* + * lp5523.c - LP5523 LED Driver + * + * Copyright (C) 2010 Nokia Corporation + * + * Contact: Samu Onkalo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define LP5523_REG_ENABLE 0x00 +#define LP5523_REG_OP_MODE 0x01 +#define LP5523_REG_RATIOMETRIC_MSB 0x02 +#define LP5523_REG_RATIOMETRIC_LSB 0x03 +#define LP5523_REG_ENABLE_LEDS_MSB 0x04 +#define LP5523_REG_ENABLE_LEDS_LSB 0x05 +#define LP5523_REG_LED_CNTRL_BASE 0x06 +#define LP5523_REG_LED_PWM_BASE 0x16 +#define LP5523_REG_LED_CURRENT_BASE 0x26 +#define LP5523_REG_CONFIG 0x36 +#define LP5523_REG_CHANNEL1_PC 0x37 +#define LP5523_REG_CHANNEL2_PC 0x38 +#define LP5523_REG_CHANNEL3_PC 0x39 +#define LP5523_REG_STATUS 0x3a +#define LP5523_REG_GPO 0x3b +#define LP5523_REG_VARIABLE 0x3c +#define LP5523_REG_RESET 0x3d +#define LP5523_REG_TEMP_CTRL 0x3e +#define LP5523_REG_TEMP_READ 0x3f +#define LP5523_REG_TEMP_WRITE 0x40 +#define LP5523_REG_LED_TEST_CTRL 0x41 +#define LP5523_REG_LED_TEST_ADC 0x42 +#define LP5523_REG_ENG1_VARIABLE 0x45 +#define LP5523_REG_ENG2_VARIABLE 0x46 +#define LP5523_REG_ENG3_VARIABLE 0x47 +#define LP5523_REG_MASTER_FADER1 0x48 +#define LP5523_REG_MASTER_FADER2 0x49 +#define LP5523_REG_MASTER_FADER3 0x4a +#define LP5523_REG_CH1_PROG_START 0x4c +#define LP5523_REG_CH2_PROG_START 0x4d +#define LP5523_REG_CH3_PROG_START 0x4e +#define LP5523_REG_PROG_PAGE_SEL 0x4f +#define LP5523_REG_PROG_MEM 0x50 + +#define LP5523_CMD_LOAD 0x15 /* 00010101 */ +#define LP5523_CMD_RUN 0x2a /* 00101010 */ +#define LP5523_CMD_DISABLED 0x00 /* 00000000 */ + +#define LP5523_ENABLE 0x40 +#define LP5523_AUTO_INC 0x40 +#define LP5523_PWR_SAVE 0x20 +#define LP5523_PWM_PWR_SAVE 0x04 +#define LP5523_CP_1 0x08 +#define LP5523_CP_1_5 0x10 +#define LP5523_CP_AUTO 0x18 +#define LP5523_INT_CLK 0x01 +#define LP5523_AUTO_CLK 0x02 +#define LP5523_EN_LEDTEST 0x80 +#define LP5523_LEDTEST_DONE 0x80 + +#define LP5523_DEFAULT_CURRENT 50 /* microAmps */ +#define LP5523_PROGRAM_LENGTH 32 /* in bytes */ +#define LP5523_PROGRAM_PAGES 6 +#define LP5523_ADC_SHORTCIRC_LIM 80 + +#define LP5523_LEDS 9 +#define LP5523_ENGINES 3 + +#define LP5523_ENG_MASK_BASE 0x30 /* 00110000 */ + +#define LP5523_ENG_STATUS_MASK 0x07 /* 00000111 */ + +#define LP5523_IRQ_FLAGS IRQF_TRIGGER_FALLING + +#define LP5523_EXT_CLK_USED 0x08 + +#define LED_ACTIVE(mux, led) (!!(mux & (0x0001 << led))) +#define SHIFT_MASK(id) (((id) - 1) * 2) + +struct lp5523_engine { + const struct attribute_group *attributes; + int id; + u8 mode; + u8 prog_page; + u8 mux_page; + u16 led_mux; + u8 engine_mask; +}; + +struct lp5523_led { + int id; + u8 chan_nr; + u8 led_current; + u8 max_current; + struct led_classdev cdev; + struct work_struct brightness_work; + u8 brightness; +}; + +struct lp5523_chip { + struct mutex lock; /* Serialize control */ + struct i2c_client *client; + struct lp5523_engine engines[LP5523_ENGINES]; + struct lp5523_led leds[LP5523_LEDS]; + struct lp5523_platform_data *pdata; + u8 num_channels; + u8 num_leds; +}; + +#define cdev_to_led(c) container_of(c, struct lp5523_led, cdev) + +static struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine) +{ + return container_of(engine, struct lp5523_chip, + engines[engine->id - 1]); +} + +static struct lp5523_chip *led_to_lp5523(struct lp5523_led *led) +{ + return container_of(led, struct lp5523_chip, + leds[led->id]); +} + +static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode); +static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode); +static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern); + +static void lp5523_led_brightness_work(struct work_struct *work); + +static int lp5523_write(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int lp5523_read(struct i2c_client *client, u8 reg, u8 *buf) +{ + s32 ret = i2c_smbus_read_byte_data(client, reg); + + if (ret < 0) + return -EIO; + + *buf = ret; + return 0; +} + +static int lp5523_detect(struct i2c_client *client) +{ + int ret; + u8 buf; + + ret = lp5523_write(client, LP5523_REG_ENABLE, 0x40); + if (ret) + return ret; + ret = lp5523_read(client, LP5523_REG_ENABLE, &buf); + if (ret) + return ret; + if (buf == 0x40) + return 0; + else + return -ENODEV; +} + +static int lp5523_configure(struct i2c_client *client) +{ + struct lp5523_chip *chip = i2c_get_clientdata(client); + int ret = 0; + u8 status; + + /* one pattern per engine setting led mux start and stop addresses */ + u8 pattern[][LP5523_PROGRAM_LENGTH] = { + { 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0}, + { 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0}, + { 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0}, + }; + + lp5523_write(client, LP5523_REG_RESET, 0xff); + + usleep_range(10000, 100000); + + ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE); + /* Chip startup time after reset is 500 us */ + usleep_range(1000, 10000); + + ret |= lp5523_write(client, LP5523_REG_CONFIG, + LP5523_AUTO_INC | LP5523_PWR_SAVE | + LP5523_CP_AUTO | LP5523_AUTO_CLK | + LP5523_PWM_PWR_SAVE); + + /* turn on all leds */ + ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_MSB, 0x01); + ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_LSB, 0xff); + + /* hardcode 32 bytes of memory for each engine from program memory */ + ret |= lp5523_write(client, LP5523_REG_CH1_PROG_START, 0x00); + ret |= lp5523_write(client, LP5523_REG_CH2_PROG_START, 0x10); + ret |= lp5523_write(client, LP5523_REG_CH3_PROG_START, 0x20); + + /* write led mux address space for each channel */ + ret |= lp5523_load_program(&chip->engines[0], pattern[0]); + ret |= lp5523_load_program(&chip->engines[1], pattern[1]); + ret |= lp5523_load_program(&chip->engines[2], pattern[2]); + + if (ret) { + dev_err(&client->dev, "could not load mux programs\n"); + return -1; + } + + /* set all engines exec state and mode to run 00101010 */ + ret |= lp5523_write(client, LP5523_REG_ENABLE, + (LP5523_CMD_RUN | LP5523_ENABLE)); + + ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_RUN); + + if (ret) { + dev_err(&client->dev, "could not start mux programs\n"); + return -1; + } + + /* Wait 3ms and check the engine status */ + usleep_range(3000, 20000); + lp5523_read(client, LP5523_REG_STATUS, &status); + status &= LP5523_ENG_STATUS_MASK; + + if (status == LP5523_ENG_STATUS_MASK) { + dev_dbg(&client->dev, "all engines configured\n"); + } else { + dev_info(&client->dev, "status == %x\n", status); + dev_err(&client->dev, "cound not configure LED engine\n"); + return -1; + } + + dev_info(&client->dev, "disabling engines\n"); + + ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_DISABLED); + + return ret; +} + +static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode) +{ + struct lp5523_chip *chip = engine_to_lp5523(engine); + struct i2c_client *client = chip->client; + int ret; + u8 engine_state; + + ret = lp5523_read(client, LP5523_REG_OP_MODE, &engine_state); + if (ret) + goto fail; + + engine_state &= ~(engine->engine_mask); + + /* set mode only for this engine */ + mode &= engine->engine_mask; + + engine_state |= mode; + + ret |= lp5523_write(client, LP5523_REG_OP_MODE, engine_state); +fail: + return ret; +} + +static int lp5523_load_mux(struct lp5523_engine *engine, u16 mux) +{ + struct lp5523_chip *chip = engine_to_lp5523(engine); + struct i2c_client *client = chip->client; + int ret = 0; + + ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD); + + ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, engine->mux_page); + ret |= lp5523_write(client, LP5523_REG_PROG_MEM, + (u8)(mux >> 8)); + ret |= lp5523_write(client, LP5523_REG_PROG_MEM + 1, (u8)(mux)); + engine->led_mux = mux; + + return ret; +} + +static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern) +{ + struct lp5523_chip *chip = engine_to_lp5523(engine); + struct i2c_client *client = chip->client; + + int ret = 0; + + ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD); + + ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, + engine->prog_page); + ret |= i2c_smbus_write_i2c_block_data(client, LP5523_REG_PROG_MEM, + LP5523_PROGRAM_LENGTH, pattern); + + return ret; +} + +static int lp5523_run_program(struct lp5523_engine *engine) +{ + struct lp5523_chip *chip = engine_to_lp5523(engine); + struct i2c_client *client = chip->client; + int ret; + + ret = lp5523_write(client, LP5523_REG_ENABLE, + LP5523_CMD_RUN | LP5523_ENABLE); + if (ret) + goto fail; + + ret = lp5523_set_engine_mode(engine, LP5523_CMD_RUN); +fail: + return ret; +} + +static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len) +{ + int i; + u16 tmp_mux = 0; + len = len < LP5523_LEDS ? len : LP5523_LEDS; + for (i = 0; i < len; i++) { + switch (buf[i]) { + case '1': + tmp_mux |= (1 << i); + break; + case '0': + break; + case '\n': + i = len; + break; + default: + return -1; + } + } + *mux = tmp_mux; + + return 0; +} + +static void lp5523_mux_to_array(u16 led_mux, char *array) +{ + int i, pos = 0; + for (i = 0; i < LP5523_LEDS; i++) + pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i)); + + array[pos] = '\0'; +} + +/*--------------------------------------------------------------*/ +/* Sysfs interface */ +/*--------------------------------------------------------------*/ + +static ssize_t show_engine_leds(struct device *dev, + struct device_attribute *attr, + char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5523_chip *chip = i2c_get_clientdata(client); + char mux[LP5523_LEDS + 1]; + + lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux); + + return sprintf(buf, "%s\n", mux); +} + +#define show_leds(nr) \ +static ssize_t show_engine##nr##_leds(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + return show_engine_leds(dev, attr, buf, nr); \ +} +show_leds(1) +show_leds(2) +show_leds(3) + +static ssize_t store_engine_leds(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5523_chip *chip = i2c_get_clientdata(client); + u16 mux = 0; + + if (lp5523_mux_parse(buf, &mux, len)) + return -EINVAL; + + if (lp5523_load_mux(&chip->engines[nr - 1], mux)) + return -EINVAL; + + return len; +} + +#define store_leds(nr) \ +static ssize_t store_engine##nr##_leds(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t len) \ +{ \ + return store_engine_leds(dev, attr, buf, len, nr); \ +} +store_leds(1) +store_leds(2) +store_leds(3) + +static ssize_t lp5523_selftest(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5523_chip *chip = i2c_get_clientdata(client); + int i, ret, pos = 0; + int led = 0; + u8 status, adc, vdd; + + mutex_lock(&chip->lock); + + ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status); + if (ret < 0) + goto fail; + + /* Check that ext clock is really in use if requested */ + if ((chip->pdata) && (chip->pdata->clock_mode == LP5523_CLOCK_EXT)) + if ((status & LP5523_EXT_CLK_USED) == 0) + goto fail; + + /* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */ + lp5523_write(chip->client, LP5523_REG_LED_TEST_CTRL, + LP5523_EN_LEDTEST | 16); + usleep_range(3000, 10000); + ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status); + if (!(status & LP5523_LEDTEST_DONE)) + usleep_range(3000, 10000); + + ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd); + vdd--; /* There may be some fluctuation in measurement */ + + for (i = 0; i < LP5523_LEDS; i++) { + /* Skip non-existing channels */ + if (chip->pdata->led_config[i].led_current == 0) + continue; + + /* Set default current */ + lp5523_write(chip->client, + LP5523_REG_LED_CURRENT_BASE + i, + chip->pdata->led_config[i].led_current); + + lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0xff); + /* let current stabilize 2ms before measurements start */ + usleep_range(2000, 10000); + lp5523_write(chip->client, + LP5523_REG_LED_TEST_CTRL, + LP5523_EN_LEDTEST | i); + /* ledtest takes 2.7ms */ + usleep_range(3000, 10000); + ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status); + if (!(status & LP5523_LEDTEST_DONE)) + usleep_range(3000, 10000); + ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc); + + if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM) + pos += sprintf(buf + pos, "LED %d FAIL\n", i); + + lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0x00); + + /* Restore current */ + lp5523_write(chip->client, + LP5523_REG_LED_CURRENT_BASE + i, + chip->leds[led].led_current); + led++; + } + if (pos == 0) + pos = sprintf(buf, "OK\n"); + goto release_lock; +fail: + pos = sprintf(buf, "FAIL\n"); + +release_lock: + mutex_unlock(&chip->lock); + + return pos; +} + +static void lp5523_set_brightness(struct led_classdev *cdev, + enum led_brightness brightness) +{ + struct lp5523_led *led = cdev_to_led(cdev); + + led->brightness = (u8)brightness; + + schedule_work(&led->brightness_work); +} + +static void lp5523_led_brightness_work(struct work_struct *work) +{ + struct lp5523_led *led = container_of(work, + struct lp5523_led, + brightness_work); + struct lp5523_chip *chip = led_to_lp5523(led); + struct i2c_client *client = chip->client; + + mutex_lock(&chip->lock); + + lp5523_write(client, LP5523_REG_LED_PWM_BASE + led->chan_nr, + led->brightness); + + mutex_unlock(&chip->lock); +} + +static int lp5523_do_store_load(struct lp5523_engine *engine, + const char *buf, size_t len) +{ + struct lp5523_chip *chip = engine_to_lp5523(engine); + struct i2c_client *client = chip->client; + int ret, nrchars, offset = 0, i = 0; + char c[3]; + unsigned cmd; + u8 pattern[LP5523_PROGRAM_LENGTH] = {0}; + + while ((offset < len - 1) && (i < LP5523_PROGRAM_LENGTH)) { + /* separate sscanfs because length is working only for %s */ + ret = sscanf(buf + offset, "%2s%n ", c, &nrchars); + ret = sscanf(c, "%2x", &cmd); + if (ret != 1) + goto fail; + pattern[i] = (u8)cmd; + + offset += nrchars; + i++; + } + + /* Each instruction is 16bit long. Check that length is even */ + if (i % 2) + goto fail; + + mutex_lock(&chip->lock); + + ret = lp5523_load_program(engine, pattern); + mutex_unlock(&chip->lock); + + if (ret) { + dev_err(&client->dev, "failed loading pattern\n"); + return ret; + } + + return len; +fail: + dev_err(&client->dev, "wrong pattern format\n"); + return -EINVAL; +} + +static ssize_t store_engine_load(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5523_chip *chip = i2c_get_clientdata(client); + return lp5523_do_store_load(&chip->engines[nr - 1], buf, len); +} + +#define store_load(nr) \ +static ssize_t store_engine##nr##_load(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t len) \ +{ \ + return store_engine_load(dev, attr, buf, len, nr); \ +} +store_load(1) +store_load(2) +store_load(3) + +static ssize_t show_engine_mode(struct device *dev, + struct device_attribute *attr, + char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5523_chip *chip = i2c_get_clientdata(client); + switch (chip->engines[nr - 1].mode) { + case LP5523_CMD_RUN: + return sprintf(buf, "run\n"); + case LP5523_CMD_LOAD: + return sprintf(buf, "load\n"); + case LP5523_CMD_DISABLED: + return sprintf(buf, "disabled\n"); + default: + return sprintf(buf, "disabled\n"); + } +} + +#define show_mode(nr) \ +static ssize_t show_engine##nr##_mode(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + return show_engine_mode(dev, attr, buf, nr); \ +} +show_mode(1) +show_mode(2) +show_mode(3) + +static ssize_t store_engine_mode(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5523_chip *chip = i2c_get_clientdata(client); + struct lp5523_engine *engine = &chip->engines[nr - 1]; + mutex_lock(&chip->lock); + + if (!strncmp(buf, "run", 3)) + lp5523_set_mode(engine, LP5523_CMD_RUN); + else if (!strncmp(buf, "load", 4)) + lp5523_set_mode(engine, LP5523_CMD_LOAD); + else if (!strncmp(buf, "disabled", 8)) + lp5523_set_mode(engine, LP5523_CMD_DISABLED); + + mutex_unlock(&chip->lock); + return len; +} + +#define store_mode(nr) \ +static ssize_t store_engine##nr##_mode(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t len) \ +{ \ + return store_engine_mode(dev, attr, buf, len, nr); \ +} +store_mode(1) +store_mode(2) +store_mode(3) + +static ssize_t show_max_current(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lp5523_led *led = cdev_to_led(led_cdev); + + return sprintf(buf, "%d\n", led->max_current); +} + +static ssize_t show_current(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lp5523_led *led = cdev_to_led(led_cdev); + + return sprintf(buf, "%d\n", led->led_current); +} + +static ssize_t store_current(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lp5523_led *led = cdev_to_led(led_cdev); + struct lp5523_chip *chip = led_to_lp5523(led); + ssize_t ret; + unsigned long curr; + + if (strict_strtoul(buf, 0, &curr)) + return -EINVAL; + + if (curr > led->max_current) + return -EINVAL; + + mutex_lock(&chip->lock); + ret = lp5523_write(chip->client, + LP5523_REG_LED_CURRENT_BASE + led->chan_nr, + (u8)curr); + mutex_unlock(&chip->lock); + + if (ret < 0) + return ret; + + led->led_current = (u8)curr; + + return len; +} + +/* led class device attributes */ +static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current); +static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL); + +static struct attribute *lp5523_led_attributes[] = { + &dev_attr_led_current.attr, + &dev_attr_max_current.attr, + NULL, +}; + +static struct attribute_group lp5523_led_attribute_group = { + .attrs = lp5523_led_attributes +}; + +/* device attributes */ +static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO, + show_engine1_mode, store_engine1_mode); +static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO, + show_engine2_mode, store_engine2_mode); +static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO, + show_engine3_mode, store_engine3_mode); +static DEVICE_ATTR(engine1_leds, S_IRUGO | S_IWUGO, + show_engine1_leds, store_engine1_leds); +static DEVICE_ATTR(engine2_leds, S_IRUGO | S_IWUGO, + show_engine2_leds, store_engine2_leds); +static DEVICE_ATTR(engine3_leds, S_IRUGO | S_IWUGO, + show_engine3_leds, store_engine3_leds); +static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load); +static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load); +static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load); +static DEVICE_ATTR(selftest, S_IRUGO, lp5523_selftest, NULL); + +static struct attribute *lp5523_attributes[] = { + &dev_attr_engine1_mode.attr, + &dev_attr_engine2_mode.attr, + &dev_attr_engine3_mode.attr, + &dev_attr_selftest.attr, + NULL +}; + +static struct attribute *lp5523_engine1_attributes[] = { + &dev_attr_engine1_load.attr, + &dev_attr_engine1_leds.attr, + NULL +}; + +static struct attribute *lp5523_engine2_attributes[] = { + &dev_attr_engine2_load.attr, + &dev_attr_engine2_leds.attr, + NULL +}; + +static struct attribute *lp5523_engine3_attributes[] = { + &dev_attr_engine3_load.attr, + &dev_attr_engine3_leds.attr, + NULL +}; + +static const struct attribute_group lp5523_group = { + .attrs = lp5523_attributes, +}; + +static const struct attribute_group lp5523_engine_group[] = { + {.attrs = lp5523_engine1_attributes }, + {.attrs = lp5523_engine2_attributes }, + {.attrs = lp5523_engine3_attributes }, +}; + +static int lp5523_register_sysfs(struct i2c_client *client) +{ + struct device *dev = &client->dev; + int ret; + + ret = sysfs_create_group(&dev->kobj, &lp5523_group); + if (ret < 0) + return ret; + + return 0; +} + +static void lp5523_unregister_sysfs(struct i2c_client *client) +{ + struct lp5523_chip *chip = i2c_get_clientdata(client); + struct device *dev = &client->dev; + int i; + + sysfs_remove_group(&dev->kobj, &lp5523_group); + + for (i = 0; i < ARRAY_SIZE(chip->engines); i++) + if (chip->engines[i].mode == LP5523_CMD_LOAD) + sysfs_remove_group(&dev->kobj, &lp5523_engine_group[i]); + + for (i = 0; i < chip->num_leds; i++) + sysfs_remove_group(&chip->leds[i].cdev.dev->kobj, + &lp5523_led_attribute_group); +} + +/*--------------------------------------------------------------*/ +/* Set chip operating mode */ +/*--------------------------------------------------------------*/ +static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode) +{ + /* engine to chip */ + struct lp5523_chip *chip = engine_to_lp5523(engine); + struct i2c_client *client = chip->client; + struct device *dev = &client->dev; + int ret = 0; + + /* if in that mode already do nothing, except for run */ + if (mode == engine->mode && mode != LP5523_CMD_RUN) + return 0; + + if (mode == LP5523_CMD_RUN) { + ret = lp5523_run_program(engine); + } else if (mode == LP5523_CMD_LOAD) { + lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED); + lp5523_set_engine_mode(engine, LP5523_CMD_LOAD); + + ret = sysfs_create_group(&dev->kobj, engine->attributes); + if (ret) + return ret; + } else if (mode == LP5523_CMD_DISABLED) { + lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED); + } + + /* remove load attribute from sysfs if not in load mode */ + if (engine->mode == LP5523_CMD_LOAD && mode != LP5523_CMD_LOAD) + sysfs_remove_group(&dev->kobj, engine->attributes); + + engine->mode = mode; + + return ret; +} + +/*--------------------------------------------------------------*/ +/* Probe, Attach, Remove */ +/*--------------------------------------------------------------*/ +static int __init lp5523_init_engine(struct lp5523_engine *engine, int id) +{ + if (id < 1 || id > LP5523_ENGINES) + return -1; + engine->id = id; + engine->engine_mask = LP5523_ENG_MASK_BASE >> SHIFT_MASK(id); + engine->prog_page = id - 1; + engine->mux_page = id + 2; + engine->attributes = &lp5523_engine_group[id - 1]; + + return 0; +} + +static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev, + int chan, struct lp5523_platform_data *pdata) +{ + char name[32]; + int res; + + if (chan >= LP5523_LEDS) + return -EINVAL; + + if (pdata->led_config[chan].led_current) { + led->led_current = pdata->led_config[chan].led_current; + led->max_current = pdata->led_config[chan].max_current; + led->chan_nr = pdata->led_config[chan].chan_nr; + + if (led->chan_nr >= LP5523_LEDS) { + dev_err(dev, "Use channel numbers between 0 and %d\n", + LP5523_LEDS - 1); + return -EINVAL; + } + + snprintf(name, 32, "lp5523:channel%d", chan); + + led->cdev.name = name; + led->cdev.brightness_set = lp5523_set_brightness; + res = led_classdev_register(dev, &led->cdev); + if (res < 0) { + dev_err(dev, "couldn't register led on channel %d\n", + chan); + return res; + } + res = sysfs_create_group(&led->cdev.dev->kobj, + &lp5523_led_attribute_group); + if (res < 0) { + dev_err(dev, "couldn't register current attribute\n"); + led_classdev_unregister(&led->cdev); + return res; + } + } else { + led->led_current = 0; + } + return 0; +} + +static struct i2c_driver lp5523_driver; + +static int lp5523_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lp5523_chip *chip; + struct lp5523_platform_data *pdata; + int ret, i, led; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + i2c_set_clientdata(client, chip); + chip->client = client; + + pdata = client->dev.platform_data; + + if (!pdata) { + dev_err(&client->dev, "no platform data\n"); + ret = -EINVAL; + goto fail1; + } + + mutex_init(&chip->lock); + + chip->pdata = pdata; + + if (pdata->setup_resources) { + ret = pdata->setup_resources(); + if (ret < 0) + goto fail1; + } + + if (pdata->enable) { + pdata->enable(0); + usleep_range(1000, 10000); + pdata->enable(1); + usleep_range(1000, 10000); /* Spec says min 500us */ + } + + ret = lp5523_detect(client); + if (ret) + goto fail2; + + dev_info(&client->dev, "LP5523 Programmable led chip found\n"); + + /* Initialize engines */ + for (i = 0; i < ARRAY_SIZE(chip->engines); i++) { + ret = lp5523_init_engine(&chip->engines[i], i + 1); + if (ret) { + dev_err(&client->dev, "error initializing engine\n"); + goto fail2; + } + } + ret = lp5523_configure(client); + if (ret < 0) { + dev_err(&client->dev, "error configuring chip\n"); + goto fail2; + } + + /* Initialize leds */ + chip->num_channels = pdata->num_channels; + chip->num_leds = 0; + led = 0; + for (i = 0; i < pdata->num_channels; i++) { + /* Do not initialize channels that are not connected */ + if (pdata->led_config[i].led_current == 0) + continue; + + ret = lp5523_init_led(&chip->leds[led], &client->dev, i, pdata); + if (ret) { + dev_err(&client->dev, "error initializing leds\n"); + goto fail3; + } + chip->num_leds++; + + chip->leds[led].id = led; + /* Set LED current */ + lp5523_write(client, + LP5523_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr, + chip->leds[led].led_current); + + INIT_WORK(&(chip->leds[led].brightness_work), + lp5523_led_brightness_work); + + led++; + } + + ret = lp5523_register_sysfs(client); + if (ret) { + dev_err(&client->dev, "registering sysfs failed\n"); + goto fail3; + } + return ret; +fail3: + for (i = 0; i < chip->num_leds; i++) { + led_classdev_unregister(&chip->leds[i].cdev); + cancel_work_sync(&chip->leds[i].brightness_work); + } +fail2: + if (pdata->enable) + pdata->enable(0); + if (pdata->release_resources) + pdata->release_resources(); +fail1: + kfree(chip); + return ret; +} + +static int lp5523_remove(struct i2c_client *client) +{ + struct lp5523_chip *chip = i2c_get_clientdata(client); + int i; + + lp5523_unregister_sysfs(client); + + for (i = 0; i < chip->num_leds; i++) { + led_classdev_unregister(&chip->leds[i].cdev); + cancel_work_sync(&chip->leds[i].brightness_work); + } + + if (chip->pdata->enable) + chip->pdata->enable(0); + if (chip->pdata->release_resources) + chip->pdata->release_resources(); + kfree(chip); + return 0; +} + +static const struct i2c_device_id lp5523_id[] = { + { "lp5523", 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, lp5523_id); + +static struct i2c_driver lp5523_driver = { + .driver = { + .name = "lp5523", + }, + .probe = lp5523_probe, + .remove = lp5523_remove, + .id_table = lp5523_id, +}; + +static int __init lp5523_init(void) +{ + int ret; + + ret = i2c_add_driver(&lp5523_driver); + + if (ret < 0) + printk(KERN_ALERT "Adding lp5523 driver failed\n"); + + return ret; +} + +static void __exit lp5523_exit(void) +{ + i2c_del_driver(&lp5523_driver); +} + +module_init(lp5523_init); +module_exit(lp5523_exit); + +MODULE_AUTHOR("Mathias Nyman "); +MODULE_DESCRIPTION("LP5523 LED engine"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/leds-lp5523.h b/include/linux/leds-lp5523.h new file mode 100644 index 000000000000..796747637b80 --- /dev/null +++ b/include/linux/leds-lp5523.h @@ -0,0 +1,47 @@ +/* + * LP5523 LED Driver + * + * Copyright (C) 2010 Nokia Corporation + * + * Contact: Samu Onkalo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __LINUX_LP5523_H +#define __LINUX_LP5523_H + +/* See Documentation/leds/leds-lp5523.txt */ + +struct lp5523_led_config { + u8 chan_nr; + u8 led_current; /* mA x10, 0 if led is not connected */ + u8 max_current; +}; + +#define LP5523_CLOCK_AUTO 0 +#define LP5523_CLOCK_INT 1 +#define LP5523_CLOCK_EXT 2 + +struct lp5523_platform_data { + struct lp5523_led_config *led_config; + u8 num_channels; + u8 clock_mode; + int (*setup_resources)(void); + void (*release_resources)(void); + void (*enable)(bool state); +}; + +#endif /* __LINUX_LP5523_H */ -- cgit v1.2.3 From fef7764f8bca9d603a8a51dcb522db97739a33c2 Mon Sep 17 00:00:00 2001 From: Arun Murthy Date: Thu, 11 Nov 2010 14:05:28 -0800 Subject: backlight: add low threshold to pwm backlight The intensity of the backlight can be varied from a range of max_brightness to zero. Though most, if not all the pwm based backlight devices start flickering at lower brightness value. And also for each device there exists a brightness value below which the backlight appears to be turned off though the value is not equal to zero. If the range of brightness for a device is from zero to max_brightness. A graph is plotted for brightness Vs intensity for the pwm based backlight device has to be a linear graph. intensity | / | / | / |/ --------- 0 max_brightness But pratically on measuring the above we note that the intensity of backlight goes to zero(OFF) when the value in not zero almost nearing to zero(some x%). so the graph looks like intensity | / | / | / | | ------------ 0 x max_brightness In order to overcome this drawback knowing this x% i.e nothing but the low threshold beyond which the backlight is off and will have no effect, the brightness value is being offset by the low threshold value(retaining the linearity of the graph). Now the graph becomes intensity | / | / | / | / ------------- 0 max_brightness With this for each and every digit increment in the brightness from zero there is a change in the intensity of backlight. Devices having this behaviour can set the low threshold brightness(lth_brightness) and pass the same as platform data else can have it as zero. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Arun Murthy Acked-by: Linus Walleij Acked-by: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/backlight/pwm_bl.c | 7 ++++++- include/linux/pwm_backlight.h | 1 + 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 550443518891..21866ec69656 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -25,6 +25,7 @@ struct pwm_bl_data { struct pwm_device *pwm; struct device *dev; unsigned int period; + unsigned int lth_brightness; int (*notify)(struct device *, int brightness); }; @@ -48,7 +49,9 @@ static int pwm_backlight_update_status(struct backlight_device *bl) pwm_config(pb->pwm, 0, pb->period); pwm_disable(pb->pwm); } else { - pwm_config(pb->pwm, brightness * pb->period / max, pb->period); + brightness = pb->lth_brightness + + (brightness * (pb->period - pb->lth_brightness) / max); + pwm_config(pb->pwm, brightness, pb->period); pwm_enable(pb->pwm); } return 0; @@ -92,6 +95,8 @@ static int pwm_backlight_probe(struct platform_device *pdev) pb->period = data->pwm_period_ns; pb->notify = data->notify; + pb->lth_brightness = data->lth_brightness * + (data->pwm_period_ns / data->max_brightness); pb->dev = &pdev->dev; pb->pwm = pwm_request(data->pwm_id, "backlight"); diff --git a/include/linux/pwm_backlight.h b/include/linux/pwm_backlight.h index 01b3d759f1fc..e031e1a486d9 100644 --- a/include/linux/pwm_backlight.h +++ b/include/linux/pwm_backlight.h @@ -8,6 +8,7 @@ struct platform_pwm_backlight_data { int pwm_id; unsigned int max_brightness; unsigned int dft_brightness; + unsigned int lth_brightness; unsigned int pwm_period_ns; int (*init)(struct device *dev); int (*notify)(struct device *dev, int brightness); -- cgit v1.2.3 From 0a85df004667c99efc31fab07386823eefce3be5 Mon Sep 17 00:00:00 2001 From: Hao Zheng Date: Thu, 11 Nov 2010 13:47:57 +0000 Subject: vlan: Add function to retrieve EtherType from vlan packets. Depending on how a packet is vlan tagged (i.e. hardware accelerated or not), the encapsulated protocol is stored in different locations. This provides a consistent method of accessing that protocol, which is needed by drivers, security checks, etc. Signed-off-by: Hao Zheng Signed-off-by: Jesse Gross Signed-off-by: David S. Miller --- include/linux/if_vlan.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'include/linux') diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h index c2f3a72712ce..635e1faec412 100644 --- a/include/linux/if_vlan.h +++ b/include/linux/if_vlan.h @@ -339,6 +339,31 @@ static inline int vlan_get_tag(const struct sk_buff *skb, u16 *vlan_tci) } } +/** + * vlan_get_protocol - get protocol EtherType. + * @skb: skbuff to query + * + * Returns the EtherType of the packet, regardless of whether it is + * vlan encapsulated (normal or hardware accelerated) or not. + */ +static inline __be16 vlan_get_protocol(const struct sk_buff *skb) +{ + __be16 protocol = 0; + + if (vlan_tx_tag_present(skb) || + skb->protocol != cpu_to_be16(ETH_P_8021Q)) + protocol = skb->protocol; + else { + __be16 proto, *protop; + protop = skb_header_pointer(skb, offsetof(struct vlan_ethhdr, + h_vlan_encapsulated_proto), + sizeof(proto), &proto); + if (likely(protop)) + protocol = *protop; + } + + return protocol; +} #endif /* __KERNEL__ */ /* VLAN IOCTLs are found in sockios.h */ -- cgit v1.2.3 From dce1431cb36338bda1167591689ab1f77ccf8934 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 13 Nov 2010 02:06:27 -0500 Subject: fsl-diu-fb: drop dead ioctl define The fsl-diu-fb driver no longer uses this define, and we have a common one to cover this already (FBIO_WAITFORVSYNC). Signed-off-by: Mike Frysinger Signed-off-by: Paul Mundt --- include/linux/fsl-diu-fb.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fsl-diu-fb.h b/include/linux/fsl-diu-fb.h index fc295d7ea463..781d4671415f 100644 --- a/include/linux/fsl-diu-fb.h +++ b/include/linux/fsl-diu-fb.h @@ -54,7 +54,6 @@ struct aoi_display_offset { }; #define MFB_SET_CHROMA_KEY _IOW('M', 1, struct mfb_chroma_key) -#define MFB_WAIT_FOR_VSYNC _IOW('F', 0x20, u_int32_t) #define MFB_SET_BRIGHTNESS _IOW('M', 3, __u8) #define MFB_SET_ALPHA 0x80014d00 -- cgit v1.2.3 From 968ab1838a5d48f02f5b471aa1d0e59e2cc2ccbc Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 15 Nov 2010 13:37:37 -0800 Subject: include/linux/kernel.h: Move logging bits to include/linux/printk.h Move the logging bits from kernel.h into printk.h so that there is a bit more logical separation of the generic from the printk logging specific parts. Signed-off-by: Joe Perches Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 245 +----------------------------------------------- include/linux/printk.h | 248 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 249 insertions(+), 244 deletions(-) create mode 100644 include/linux/printk.h (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index fc3da9e4da19..b6de9a6f7018 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -17,13 +17,11 @@ #include #include #include +#include #include #include #include -extern const char linux_banner[]; -extern const char linux_proc_banner[]; - #define USHRT_MAX ((u16)(~0U)) #define SHRT_MAX ((s16)(USHRT_MAX>>1)) #define SHRT_MIN ((s16)(-SHRT_MAX - 1)) @@ -110,31 +108,6 @@ extern const char linux_proc_banner[]; */ #define lower_32_bits(n) ((u32)(n)) -#define KERN_EMERG "<0>" /* system is unusable */ -#define KERN_ALERT "<1>" /* action must be taken immediately */ -#define KERN_CRIT "<2>" /* critical conditions */ -#define KERN_ERR "<3>" /* error conditions */ -#define KERN_WARNING "<4>" /* warning conditions */ -#define KERN_NOTICE "<5>" /* normal but significant condition */ -#define KERN_INFO "<6>" /* informational */ -#define KERN_DEBUG "<7>" /* debug-level messages */ - -/* Use the default kernel loglevel */ -#define KERN_DEFAULT "" -/* - * Annotation for a "continued" line of log printout (only done after a - * line that had no enclosing \n). Only to be used by core/arch code - * during early bootup (a continued line is not SMP-safe otherwise). - */ -#define KERN_CONT "" - -extern int console_printk[]; - -#define console_loglevel (console_printk[0]) -#define default_message_loglevel (console_printk[1]) -#define minimum_console_loglevel (console_printk[2]) -#define default_console_loglevel (console_printk[3]) - struct completion; struct pt_regs; struct user; @@ -187,11 +160,6 @@ static inline void might_fault(void) } #endif -struct va_format { - const char *fmt; - va_list *va; -}; - extern struct atomic_notifier_head panic_notifier_list; extern long (*panic_blink)(int state); NORET_TYPE void panic(const char * fmt, ...) @@ -245,115 +213,8 @@ extern int func_ptr_is_kernel_text(void *ptr); struct pid; extern struct pid *session_of_pgrp(struct pid *pgrp); -/* - * FW_BUG - * Add this to a message where you are sure the firmware is buggy or behaves - * really stupid or out of spec. Be aware that the responsible BIOS developer - * should be able to fix this issue or at least get a concrete idea of the - * problem by reading your message without the need of looking at the kernel - * code. - * - * Use it for definite and high priority BIOS bugs. - * - * FW_WARN - * Use it for not that clear (e.g. could the kernel messed up things already?) - * and medium priority BIOS bugs. - * - * FW_INFO - * Use this one if you want to tell the user or vendor about something - * suspicious, but generally harmless related to the firmware. - * - * Use it for information or very low priority BIOS bugs. - */ -#define FW_BUG "[Firmware Bug]: " -#define FW_WARN "[Firmware Warn]: " -#define FW_INFO "[Firmware Info]: " - -/* - * HW_ERR - * Add this to a message for hardware errors, so that user can report - * it to hardware vendor instead of LKML or software vendor. - */ -#define HW_ERR "[Hardware Error]: " - -#ifdef CONFIG_PRINTK -asmlinkage int vprintk(const char *fmt, va_list args) - __attribute__ ((format (printf, 1, 0))); -asmlinkage int printk(const char * fmt, ...) - __attribute__ ((format (printf, 1, 2))) __cold; - -/* - * Please don't use printk_ratelimit(), because it shares ratelimiting state - * with all other unrelated printk_ratelimit() callsites. Instead use - * printk_ratelimited() or plain old __ratelimit(). - */ -extern int __printk_ratelimit(const char *func); -#define printk_ratelimit() __printk_ratelimit(__func__) -extern bool printk_timed_ratelimit(unsigned long *caller_jiffies, - unsigned int interval_msec); - -extern int printk_delay_msec; -extern int dmesg_restrict; - -/* - * Print a one-time message (analogous to WARN_ONCE() et al): - */ -#define printk_once(x...) ({ \ - static bool __print_once; \ - \ - if (!__print_once) { \ - __print_once = true; \ - printk(x); \ - } \ -}) - -void log_buf_kexec_setup(void); -#else -static inline int vprintk(const char *s, va_list args) - __attribute__ ((format (printf, 1, 0))); -static inline int vprintk(const char *s, va_list args) { return 0; } -static inline int printk(const char *s, ...) - __attribute__ ((format (printf, 1, 2))); -static inline int __cold printk(const char *s, ...) { return 0; } -static inline int printk_ratelimit(void) { return 0; } -static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \ - unsigned int interval_msec) \ - { return false; } - -/* No effect, but we still get type checking even in the !PRINTK case: */ -#define printk_once(x...) printk(x) - -static inline void log_buf_kexec_setup(void) -{ -} -#endif - -/* - * Dummy printk for disabled debugging statements to use whilst maintaining - * gcc's format and side-effect checking. - */ -static inline __attribute__ ((format (printf, 1, 2))) -int no_printk(const char *s, ...) { return 0; } - -extern int printk_needs_cpu(int cpu); -extern void printk_tick(void); - -extern void asmlinkage __attribute__((format(printf, 1, 2))) - early_printk(const char *fmt, ...); - unsigned long int_sqrt(unsigned long); -static inline void console_silent(void) -{ - console_loglevel = 0; -} - -static inline void console_verbose(void) -{ - if (console_loglevel) - console_loglevel = 15; -} - extern void bust_spinlocks(int yes); extern void wake_up_klogd(void); extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */ @@ -390,22 +251,6 @@ extern enum system_states { #define TAINT_CRAP 10 #define TAINT_FIRMWARE_WORKAROUND 11 -extern void dump_stack(void) __cold; - -enum { - DUMP_PREFIX_NONE, - DUMP_PREFIX_ADDRESS, - DUMP_PREFIX_OFFSET -}; -extern void hex_dump_to_buffer(const void *buf, size_t len, - int rowsize, int groupsize, - char *linebuf, size_t linebuflen, bool ascii); -extern void print_hex_dump(const char *level, const char *prefix_str, - int prefix_type, int rowsize, int groupsize, - const void *buf, size_t len, bool ascii); -extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type, - const void *buf, size_t len); - extern const char hex_asc[]; #define hex_asc_lo(x) hex_asc[((x) & 0x0f)] #define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4] @@ -419,94 +264,6 @@ static inline char *pack_hex_byte(char *buf, u8 byte) extern int hex_to_bin(char ch); -#ifndef pr_fmt -#define pr_fmt(fmt) fmt -#endif - -#define pr_emerg(fmt, ...) \ - printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) -#define pr_alert(fmt, ...) \ - printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__) -#define pr_crit(fmt, ...) \ - printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) -#define pr_err(fmt, ...) \ - printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) -#define pr_warning(fmt, ...) \ - printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) -#define pr_warn pr_warning -#define pr_notice(fmt, ...) \ - printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) -#define pr_info(fmt, ...) \ - printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) -#define pr_cont(fmt, ...) \ - printk(KERN_CONT fmt, ##__VA_ARGS__) - -/* pr_devel() should produce zero code unless DEBUG is defined */ -#ifdef DEBUG -#define pr_devel(fmt, ...) \ - printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) -#else -#define pr_devel(fmt, ...) \ - ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) -#endif - -/* If you are writing a driver, please use dev_dbg instead */ -#if defined(DEBUG) -#define pr_debug(fmt, ...) \ - printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) -#elif defined(CONFIG_DYNAMIC_DEBUG) -/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */ -#define pr_debug(fmt, ...) \ - dynamic_pr_debug(fmt, ##__VA_ARGS__) -#else -#define pr_debug(fmt, ...) \ - ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) -#endif - -/* - * ratelimited messages with local ratelimit_state, - * no local ratelimit_state used in the !PRINTK case - */ -#ifdef CONFIG_PRINTK -#define printk_ratelimited(fmt, ...) ({ \ - static DEFINE_RATELIMIT_STATE(_rs, \ - DEFAULT_RATELIMIT_INTERVAL, \ - DEFAULT_RATELIMIT_BURST); \ - \ - if (__ratelimit(&_rs)) \ - printk(fmt, ##__VA_ARGS__); \ -}) -#else -/* No effect, but we still get type checking even in the !PRINTK case: */ -#define printk_ratelimited printk -#endif - -#define pr_emerg_ratelimited(fmt, ...) \ - printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) -#define pr_alert_ratelimited(fmt, ...) \ - printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__) -#define pr_crit_ratelimited(fmt, ...) \ - printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) -#define pr_err_ratelimited(fmt, ...) \ - printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) -#define pr_warning_ratelimited(fmt, ...) \ - printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) -#define pr_warn_ratelimited pr_warning_ratelimited -#define pr_notice_ratelimited(fmt, ...) \ - printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) -#define pr_info_ratelimited(fmt, ...) \ - printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) -/* no pr_cont_ratelimited, don't do that... */ -/* If you are writing a driver, please use dev_dbg instead */ -#if defined(DEBUG) -#define pr_debug_ratelimited(fmt, ...) \ - printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) -#else -#define pr_debug_ratelimited(fmt, ...) \ - ({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \ - ##__VA_ARGS__); 0; }) -#endif - /* * General tracing related utility functions - trace_printk(), * tracing_on/tracing_off and tracing_start()/tracing_stop diff --git a/include/linux/printk.h b/include/linux/printk.h new file mode 100644 index 000000000000..b772ca5fbdf0 --- /dev/null +++ b/include/linux/printk.h @@ -0,0 +1,248 @@ +#ifndef __KERNEL_PRINTK__ +#define __KERNEL_PRINTK__ + +extern const char linux_banner[]; +extern const char linux_proc_banner[]; + +#define KERN_EMERG "<0>" /* system is unusable */ +#define KERN_ALERT "<1>" /* action must be taken immediately */ +#define KERN_CRIT "<2>" /* critical conditions */ +#define KERN_ERR "<3>" /* error conditions */ +#define KERN_WARNING "<4>" /* warning conditions */ +#define KERN_NOTICE "<5>" /* normal but significant condition */ +#define KERN_INFO "<6>" /* informational */ +#define KERN_DEBUG "<7>" /* debug-level messages */ + +/* Use the default kernel loglevel */ +#define KERN_DEFAULT "" +/* + * Annotation for a "continued" line of log printout (only done after a + * line that had no enclosing \n). Only to be used by core/arch code + * during early bootup (a continued line is not SMP-safe otherwise). + */ +#define KERN_CONT "" + +extern int console_printk[]; + +#define console_loglevel (console_printk[0]) +#define default_message_loglevel (console_printk[1]) +#define minimum_console_loglevel (console_printk[2]) +#define default_console_loglevel (console_printk[3]) + +struct va_format { + const char *fmt; + va_list *va; +}; + +/* + * FW_BUG + * Add this to a message where you are sure the firmware is buggy or behaves + * really stupid or out of spec. Be aware that the responsible BIOS developer + * should be able to fix this issue or at least get a concrete idea of the + * problem by reading your message without the need of looking at the kernel + * code. + * + * Use it for definite and high priority BIOS bugs. + * + * FW_WARN + * Use it for not that clear (e.g. could the kernel messed up things already?) + * and medium priority BIOS bugs. + * + * FW_INFO + * Use this one if you want to tell the user or vendor about something + * suspicious, but generally harmless related to the firmware. + * + * Use it for information or very low priority BIOS bugs. + */ +#define FW_BUG "[Firmware Bug]: " +#define FW_WARN "[Firmware Warn]: " +#define FW_INFO "[Firmware Info]: " + +/* + * HW_ERR + * Add this to a message for hardware errors, so that user can report + * it to hardware vendor instead of LKML or software vendor. + */ +#define HW_ERR "[Hardware Error]: " + +#ifdef CONFIG_PRINTK +asmlinkage int vprintk(const char *fmt, va_list args) + __attribute__ ((format (printf, 1, 0))); +asmlinkage int printk(const char * fmt, ...) + __attribute__ ((format (printf, 1, 2))) __cold; + +/* + * Please don't use printk_ratelimit(), because it shares ratelimiting state + * with all other unrelated printk_ratelimit() callsites. Instead use + * printk_ratelimited() or plain old __ratelimit(). + */ +extern int __printk_ratelimit(const char *func); +#define printk_ratelimit() __printk_ratelimit(__func__) +extern bool printk_timed_ratelimit(unsigned long *caller_jiffies, + unsigned int interval_msec); + +extern int printk_delay_msec; +extern int dmesg_restrict; + +/* + * Print a one-time message (analogous to WARN_ONCE() et al): + */ +#define printk_once(x...) ({ \ + static bool __print_once; \ + \ + if (!__print_once) { \ + __print_once = true; \ + printk(x); \ + } \ +}) + +void log_buf_kexec_setup(void); +#else +static inline int vprintk(const char *s, va_list args) + __attribute__ ((format (printf, 1, 0))); +static inline int vprintk(const char *s, va_list args) { return 0; } +static inline int printk(const char *s, ...) + __attribute__ ((format (printf, 1, 2))); +static inline int __cold printk(const char *s, ...) { return 0; } +static inline int printk_ratelimit(void) { return 0; } +static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \ + unsigned int interval_msec) \ + { return false; } + +/* No effect, but we still get type checking even in the !PRINTK case: */ +#define printk_once(x...) printk(x) + +static inline void log_buf_kexec_setup(void) +{ +} +#endif + +/* + * Dummy printk for disabled debugging statements to use whilst maintaining + * gcc's format and side-effect checking. + */ +static inline __attribute__ ((format (printf, 1, 2))) +int no_printk(const char *s, ...) { return 0; } + +extern int printk_needs_cpu(int cpu); +extern void printk_tick(void); + +extern void asmlinkage __attribute__((format(printf, 1, 2))) + early_printk(const char *fmt, ...); + +static inline void console_silent(void) +{ + console_loglevel = 0; +} + +static inline void console_verbose(void) +{ + if (console_loglevel) + console_loglevel = 15; +} + +extern void dump_stack(void) __cold; + +enum { + DUMP_PREFIX_NONE, + DUMP_PREFIX_ADDRESS, + DUMP_PREFIX_OFFSET +}; +extern void hex_dump_to_buffer(const void *buf, size_t len, + int rowsize, int groupsize, + char *linebuf, size_t linebuflen, bool ascii); +extern void print_hex_dump(const char *level, const char *prefix_str, + int prefix_type, int rowsize, int groupsize, + const void *buf, size_t len, bool ascii); +extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type, + const void *buf, size_t len); + +#ifndef pr_fmt +#define pr_fmt(fmt) fmt +#endif + +#define pr_emerg(fmt, ...) \ + printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) +#define pr_alert(fmt, ...) \ + printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_crit(fmt, ...) \ + printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_err(fmt, ...) \ + printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) +#define pr_warning(fmt, ...) \ + printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) +#define pr_warn pr_warning +#define pr_notice(fmt, ...) \ + printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) +#define pr_info(fmt, ...) \ + printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) +#define pr_cont(fmt, ...) \ + printk(KERN_CONT fmt, ##__VA_ARGS__) + +/* pr_devel() should produce zero code unless DEBUG is defined */ +#ifdef DEBUG +#define pr_devel(fmt, ...) \ + printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) +#else +#define pr_devel(fmt, ...) \ + ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) +#endif + +/* If you are writing a driver, please use dev_dbg instead */ +#if defined(DEBUG) +#define pr_debug(fmt, ...) \ + printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) +#elif defined(CONFIG_DYNAMIC_DEBUG) +/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */ +#define pr_debug(fmt, ...) \ + dynamic_pr_debug(fmt, ##__VA_ARGS__) +#else +#define pr_debug(fmt, ...) \ + ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) +#endif + +/* + * ratelimited messages with local ratelimit_state, + * no local ratelimit_state used in the !PRINTK case + */ +#ifdef CONFIG_PRINTK +#define printk_ratelimited(fmt, ...) ({ \ + static DEFINE_RATELIMIT_STATE(_rs, \ + DEFAULT_RATELIMIT_INTERVAL, \ + DEFAULT_RATELIMIT_BURST); \ + \ + if (__ratelimit(&_rs)) \ + printk(fmt, ##__VA_ARGS__); \ +}) +#else +/* No effect, but we still get type checking even in the !PRINTK case: */ +#define printk_ratelimited printk +#endif + +#define pr_emerg_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) +#define pr_alert_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_crit_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_err_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) +#define pr_warning_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) +#define pr_warn_ratelimited pr_warning_ratelimited +#define pr_notice_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) +#define pr_info_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) +/* no pr_cont_ratelimited, don't do that... */ +/* If you are writing a driver, please use dev_dbg instead */ +#if defined(DEBUG) +#define pr_debug_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) +#else +#define pr_debug_ratelimited(fmt, ...) \ + ({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \ + ##__VA_ARGS__); 0; }) +#endif + +#endif -- cgit v1.2.3 From dfdee5f00cc9ce21b0a7e786039bcfec26fbcb4b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 15 Nov 2010 22:40:38 +0100 Subject: i2c: Delete unused adapter IDs Delete unused I2C adapter IDs. Special cases are: * I2C_HW_B_RIVA was still set in driver rivafb, however no other driver is ever looking for this value, so we can safely remove it. * I2C_HW_B_HDPVR is used in staging driver lirc_zilog, however no adapter ID is ever set to this value, so the code in question never runs. As the code additionally expects that I2C_HW_B_HDPVR may not be defined, we can delete it now and let the lirc_zilog driver maintainer rewrite this piece of code. Big thanks for Hans Verkuil for doing all the hard work :) Signed-off-by: Jean Delvare Acked-by: Jarod Wilson Acked-by: Mauro Carvalho Chehab Acked-by: Hans Verkuil --- drivers/video/riva/rivafb-i2c.c | 1 - include/linux/i2c-id.h | 22 ---------------------- 2 files changed, 23 deletions(-) (limited to 'include/linux') diff --git a/drivers/video/riva/rivafb-i2c.c b/drivers/video/riva/rivafb-i2c.c index a0e22ac483a3..167400e2a182 100644 --- a/drivers/video/riva/rivafb-i2c.c +++ b/drivers/video/riva/rivafb-i2c.c @@ -94,7 +94,6 @@ static int __devinit riva_setup_i2c_bus(struct riva_i2c_chan *chan, strcpy(chan->adapter.name, name); chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_HW_B_RIVA; chan->adapter.class = i2c_class; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->par->pdev->dev; diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index e844a0b18695..4bef5c557160 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -32,28 +32,6 @@ */ /* --- Bit algorithm adapters */ -#define I2C_HW_B_BT848 0x010005 /* BT848 video boards */ -#define I2C_HW_B_RIVA 0x010010 /* Riva based graphics cards */ -#define I2C_HW_B_ZR36067 0x010019 /* Zoran-36057/36067 based boards */ #define I2C_HW_B_CX2388x 0x01001b /* connexant 2388x based tv cards */ -#define I2C_HW_B_EM28XX 0x01001f /* em28xx video capture cards */ -#define I2C_HW_B_CX2341X 0x010020 /* Conexant CX2341X MPEG encoder cards */ -#define I2C_HW_B_CX23885 0x010022 /* conexant 23885 based tv cards (bus1) */ -#define I2C_HW_B_AU0828 0x010023 /* auvitek au0828 usb bridge */ -#define I2C_HW_B_CX231XX 0x010024 /* Conexant CX231XX USB based cards */ -#define I2C_HW_B_HDPVR 0x010025 /* Hauppauge HD PVR */ - -/* --- SGI adapters */ -#define I2C_HW_SGI_VINO 0x160000 - -/* --- SMBus only adapters */ -#define I2C_HW_SMBUS_W9968CF 0x04000d -#define I2C_HW_SMBUS_OV511 0x04000e /* OV511(+) USB 1.1 webcam ICs */ -#define I2C_HW_SMBUS_OV518 0x04000f /* OV518(+) USB 1.1 webcam ICs */ -#define I2C_HW_SMBUS_CAFE 0x040012 /* Marvell 88ALP01 "CAFE" cam */ - -/* --- Miscellaneous adapters */ -#define I2C_HW_SAA7146 0x060000 /* SAA7146 video decoder bus */ -#define I2C_HW_SAA7134 0x090000 /* SAA7134 video decoder bus */ #endif /* LINUX_I2C_ID_H */ -- cgit v1.2.3 From e1e18ee1cb58228a577668284c1dd03d859d7157 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 15 Nov 2010 22:40:38 +0100 Subject: i2c: Mark i2c_adapter.id as deprecated It's about time to make it clear that i2c_adapter.id is deprecated. Hopefully this will remind the last user to move over to a different strategy. Signed-off-by: Jean Delvare Acked-by: Jarod Wilson Acked-by: Mauro Carvalho Chehab Acked-by: Hans Verkuil --- Documentation/feature-removal-schedule.txt | 10 ++++++++++ drivers/i2c/i2c-mux.c | 1 - include/linux/i2c.h | 2 +- 3 files changed, 11 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index d8f36f984faa..6c2f55e05f13 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -554,3 +554,13 @@ Why: This is a legacy interface which have been replaced by a more Who: NeilBrown ---------------------------- + +What: i2c_adapter.id +When: June 2011 +Why: This field is deprecated. I2C device drivers shouldn't change their + behavior based on the underlying I2C adapter. Instead, the I2C + adapter driver should instantiate the I2C devices and provide the + needed platform-specific information. +Who: Jean Delvare + +---------------------------- diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c index d32a4843fc3a..d7a4833be416 100644 --- a/drivers/i2c/i2c-mux.c +++ b/drivers/i2c/i2c-mux.c @@ -120,7 +120,6 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent, snprintf(priv->adap.name, sizeof(priv->adap.name), "i2c-%d-mux (chan_id %d)", i2c_adapter_id(parent), chan_id); priv->adap.owner = THIS_MODULE; - priv->adap.id = parent->id; priv->adap.algo = &priv->algo; priv->adap.algo_data = priv; priv->adap.dev.parent = &parent->dev; diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 889b35abaeda..56cfe23ffb39 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -353,7 +353,7 @@ struct i2c_algorithm { */ struct i2c_adapter { struct module *owner; - unsigned int id; + unsigned int id __deprecated; unsigned int class; /* classes to allow probing for */ const struct i2c_algorithm *algo; /* the algorithm to access the bus */ void *algo_data; -- cgit v1.2.3 From 12b3052c3ee8f508b2c7ee4ddd63ed03423409d8 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Mon, 15 Nov 2010 18:36:29 -0500 Subject: capabilities/syslog: open code cap_syslog logic to fix build failure The addition of CONFIG_SECURITY_DMESG_RESTRICT resulted in a build failure when CONFIG_PRINTK=n. This is because the capabilities code which used the new option was built even though the variable in question didn't exist. The patch here fixes this by moving the capabilities checks out of the LSM and into the caller. All (known) LSMs should have been calling the capabilities hook already so it actually makes the code organization better to eliminate the hook altogether. Signed-off-by: Eric Paris Acked-by: James Morris Signed-off-by: Linus Torvalds --- include/linux/security.h | 9 ++++----- kernel/printk.c | 15 ++++++++++++++- security/capability.c | 5 +++++ security/commoncap.c | 21 --------------------- security/security.c | 4 ++-- security/selinux/hooks.c | 6 +----- security/smack/smack_lsm.c | 8 ++------ 7 files changed, 28 insertions(+), 40 deletions(-) (limited to 'include/linux') diff --git a/include/linux/security.h b/include/linux/security.h index b8246a8df7d2..fd4d55fb8845 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -77,7 +77,6 @@ extern int cap_task_prctl(int option, unsigned long arg2, unsigned long arg3, extern int cap_task_setscheduler(struct task_struct *p); extern int cap_task_setioprio(struct task_struct *p, int ioprio); extern int cap_task_setnice(struct task_struct *p, int nice); -extern int cap_syslog(int type, bool from_file); extern int cap_vm_enough_memory(struct mm_struct *mm, long pages); struct msghdr; @@ -1388,7 +1387,7 @@ struct security_operations { int (*sysctl) (struct ctl_table *table, int op); int (*quotactl) (int cmds, int type, int id, struct super_block *sb); int (*quota_on) (struct dentry *dentry); - int (*syslog) (int type, bool from_file); + int (*syslog) (int type); int (*settime) (struct timespec *ts, struct timezone *tz); int (*vm_enough_memory) (struct mm_struct *mm, long pages); @@ -1671,7 +1670,7 @@ int security_real_capable_noaudit(struct task_struct *tsk, int cap); int security_sysctl(struct ctl_table *table, int op); int security_quotactl(int cmds, int type, int id, struct super_block *sb); int security_quota_on(struct dentry *dentry); -int security_syslog(int type, bool from_file); +int security_syslog(int type); int security_settime(struct timespec *ts, struct timezone *tz); int security_vm_enough_memory(long pages); int security_vm_enough_memory_mm(struct mm_struct *mm, long pages); @@ -1901,9 +1900,9 @@ static inline int security_quota_on(struct dentry *dentry) return 0; } -static inline int security_syslog(int type, bool from_file) +static inline int security_syslog(int type) { - return cap_syslog(type, from_file); + return 0; } static inline int security_settime(struct timespec *ts, struct timezone *tz) diff --git a/kernel/printk.c b/kernel/printk.c index 38e7d5868d60..9a2264fc42ca 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -274,7 +274,20 @@ int do_syslog(int type, char __user *buf, int len, bool from_file) char c; int error = 0; - error = security_syslog(type, from_file); + /* + * If this is from /proc/kmsg we only do the capabilities checks + * at open time. + */ + if (type == SYSLOG_ACTION_OPEN || !from_file) { + if (dmesg_restrict && !capable(CAP_SYS_ADMIN)) + return -EPERM; + if ((type != SYSLOG_ACTION_READ_ALL && + type != SYSLOG_ACTION_SIZE_BUFFER) && + !capable(CAP_SYS_ADMIN)) + return -EPERM; + } + + error = security_syslog(type); if (error) return error; diff --git a/security/capability.c b/security/capability.c index 30ae00fbecd5..c773635ca3a0 100644 --- a/security/capability.c +++ b/security/capability.c @@ -17,6 +17,11 @@ static int cap_sysctl(ctl_table *table, int op) return 0; } +static int cap_syslog(int type) +{ + return 0; +} + static int cap_quotactl(int cmds, int type, int id, struct super_block *sb) { return 0; diff --git a/security/commoncap.c b/security/commoncap.c index 04b80f9912bf..64c2ed9c9015 100644 --- a/security/commoncap.c +++ b/security/commoncap.c @@ -27,7 +27,6 @@ #include #include #include -#include /* * If a non-root user executes a setuid-root binary in @@ -883,26 +882,6 @@ error: return error; } -/** - * cap_syslog - Determine whether syslog function is permitted - * @type: Function requested - * @from_file: Whether this request came from an open file (i.e. /proc) - * - * Determine whether the current process is permitted to use a particular - * syslog function, returning 0 if permission is granted, -ve if not. - */ -int cap_syslog(int type, bool from_file) -{ - if (type != SYSLOG_ACTION_OPEN && from_file) - return 0; - if (dmesg_restrict && !capable(CAP_SYS_ADMIN)) - return -EPERM; - if ((type != SYSLOG_ACTION_READ_ALL && - type != SYSLOG_ACTION_SIZE_BUFFER) && !capable(CAP_SYS_ADMIN)) - return -EPERM; - return 0; -} - /** * cap_vm_enough_memory - Determine whether a new virtual mapping is permitted * @mm: The VM space in which the new mapping is to be made diff --git a/security/security.c b/security/security.c index 3ef5e2a7a741..1b798d3df710 100644 --- a/security/security.c +++ b/security/security.c @@ -197,9 +197,9 @@ int security_quota_on(struct dentry *dentry) return security_ops->quota_on(dentry); } -int security_syslog(int type, bool from_file) +int security_syslog(int type) { - return security_ops->syslog(type, from_file); + return security_ops->syslog(type); } int security_settime(struct timespec *ts, struct timezone *tz) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index d9154cf90ae1..65fa8bf596f5 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -1973,14 +1973,10 @@ static int selinux_quota_on(struct dentry *dentry) return dentry_has_perm(cred, NULL, dentry, FILE__QUOTAON); } -static int selinux_syslog(int type, bool from_file) +static int selinux_syslog(int type) { int rc; - rc = cap_syslog(type, from_file); - if (rc) - return rc; - switch (type) { case SYSLOG_ACTION_READ_ALL: /* Read last kernel messages */ case SYSLOG_ACTION_SIZE_BUFFER: /* Return size of the log buffer */ diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index bc39f4067af6..489a85afa477 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -157,15 +157,11 @@ static int smack_ptrace_traceme(struct task_struct *ptp) * * Returns 0 on success, error code otherwise. */ -static int smack_syslog(int type, bool from_file) +static int smack_syslog(int typefrom_file) { - int rc; + int rc = 0; char *sp = current_security(); - rc = cap_syslog(type, from_file); - if (rc != 0) - return rc; - if (capable(CAP_MAC_OVERRIDE)) return 0; -- cgit v1.2.3