From c848bc8538cd29e92223d5e72e8fb60e6f2e176e Mon Sep 17 00:00:00 2001 From: Sangbeom Kim Date: Mon, 18 Jun 2012 09:49:20 +0900 Subject: regulator: s5m8767a: Support AP watchdog reset operation The S5M8767A can't know status of ap reset. So, After AP watchdog reset, AP can't boot normally. Problem can be happened like below condition. - AP Bootable lowest voltage(vdd_arm): 0.9v - AP DVFS voltage table: 0.8v, 0.9v, 1.0v - During AP works on lowest voltage(0.8V), watchdog reset is asserted - AP can't boot, because vdd arm is still 0.8v Solution - Basic concept: After ap watchdog reset, GPIO configuration is changed by default value - S5M8767A has function of voltage control with gpio (8 levels with 3 gpios) - Set bootable voltage on level 0 -> can work with default gpio configuration - In the probing, Change voltage control level from level 0 to level 1 - Execute normal dvfs operation on level 1 - After watchdog reset, ap gpio is set by default value - PMIC operation mode is changed by ap reset (level1 -> level0) - Regardless of previous vdd_arm voltage, AP always can be booted. Signed-off-by: Sangbeom Kim Signed-off-by: Mark Brown --- include/linux/mfd/s5m87xx/s5m-core.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/s5m87xx/s5m-core.h b/include/linux/mfd/s5m87xx/s5m-core.h index 21603b42f22f..0b2e0ed309f5 100644 --- a/include/linux/mfd/s5m87xx/s5m-core.h +++ b/include/linux/mfd/s5m87xx/s5m-core.h @@ -347,6 +347,7 @@ struct s5m_platform_data { bool buck_voltage_lock; int buck_gpios[3]; + int buck_ds[3]; int buck2_voltage[8]; bool buck2_gpiodvs; int buck3_voltage[8]; @@ -369,6 +370,10 @@ struct s5m_platform_data { bool buck2_ramp_enable; bool buck3_ramp_enable; bool buck4_ramp_enable; + + int buck2_init; + int buck3_init; + int buck4_init; }; #endif /* __LINUX_MFD_S5M_CORE_H */ -- cgit v1.2.3