From 3b1c5a5307fb5277f395efdcf330c064d79df07d Mon Sep 17 00:00:00 2001 From: Marco Porsch Date: Mon, 7 Jan 2013 16:04:52 +0100 Subject: {cfg,nl}80211: mesh power mode primitives and userspace access Add the nl80211_mesh_power_mode enumeration which holds possible values for the mesh power mode. These modes are unknown, active, light sleep and deep sleep. Add power_mode entry to the mesh config structure to hold the user-configured default mesh power mode. This value will be used for new peer links. Add the dot11MeshAwakeWindowDuration value to the mesh config. The awake window is a duration in TU describing how long the STA will stay awake after transmitting its beacon in PS mode. Add access routines to: - get/set local link-specific power mode (STA) - get remote STA's link-specific power mode (STA) - get remote STA's non-peer power mode (STA) - get/set default mesh power mode (mesh config) - get/set mesh awake window duration (mesh config) All config changes may be done at mesh runtime and take effect immediately. Signed-off-by: Marco Porsch Signed-off-by: Ivan Bezyazychnyy Signed-off-by: Mike Krinkin [fix commit message line length, error handling in set station] Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 47 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 547017100a30..6c4f703ae890 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1310,6 +1310,9 @@ enum nl80211_commands { * if not given in START_AP 0 is assumed, if not given in SET_BSS * no change is made. * + * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode + * defined in &enum nl80211_mesh_power_mode. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1580,6 +1583,8 @@ enum nl80211_attrs { NL80211_ATTR_P2P_CTWINDOW, NL80211_ATTR_P2P_OPPPS, + NL80211_ATTR_LOCAL_MESH_POWER_MODE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1838,6 +1843,10 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) + * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode + * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode + * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards + * non-peer STA * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -1862,6 +1871,9 @@ enum nl80211_sta_info { NL80211_STA_INFO_STA_FLAGS, NL80211_STA_INFO_BEACON_LOSS, NL80211_STA_INFO_T_OFFSET, + NL80211_STA_INFO_LOCAL_PM, + NL80211_STA_INFO_PEER_PM, + NL80211_STA_INFO_NONPEER_PM, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -2252,6 +2264,34 @@ enum nl80211_mntr_flags { NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 }; +/** + * enum nl80211_mesh_power_mode - mesh power save modes + * + * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is + * not known or has not been set yet. + * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is + * in Awake state all the time. + * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will + * alternate between Active and Doze states, but will wake up for + * neighbor's beacons. + * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will + * alternate between Active and Doze states, but may not wake up + * for neighbor's beacons. + * + * @__NL80211_MESH_POWER_AFTER_LAST - internal use + * @NL80211_MESH_POWER_MAX - highest possible power save level + */ + +enum nl80211_mesh_power_mode { + NL80211_MESH_POWER_UNKNOWN, + NL80211_MESH_POWER_ACTIVE, + NL80211_MESH_POWER_LIGHT_SLEEP, + NL80211_MESH_POWER_DEEP_SLEEP, + + __NL80211_MESH_POWER_AFTER_LAST, + NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1 +}; + /** * enum nl80211_meshconf_params - mesh configuration parameters * @@ -2346,6 +2386,11 @@ enum nl80211_mntr_flags { * (in TUs) during which a mesh STA can send only one Action frame * containing a PREQ element for root path confirmation. * + * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links. + * type &enum nl80211_mesh_power_mode (u32) + * + * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs) + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2375,6 +2420,8 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, NL80211_MESHCONF_HWMP_ROOT_INTERVAL, NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, + NL80211_MESHCONF_POWER_MODE, + NL80211_MESHCONF_AWAKE_WINDOW, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, -- cgit v1.2.3 From cee00a959c0a86571e6f99cf42f0261d7e54d2ae Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Tue, 15 Jan 2013 17:15:57 +0200 Subject: cfg80211: Allow use_mfp to be specified with the connect command The NL80211_ATTR_USE_MFP attribute was originally added for NL80211_CMD_ASSOCIATE, but it is actually as useful (if not even more useful) with NL80211_CMD_CONNECT, so process that attribute with the connect command, too. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 2 ++ include/uapi/linux/nl80211.h | 6 +++--- net/wireless/nl80211.c | 9 +++++++++ net/wireless/sme.c | 3 ++- 4 files changed, 16 insertions(+), 4 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index d81e730962cc..f1686d460e6b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1465,6 +1465,7 @@ struct cfg80211_ibss_params { * @ie: IEs for association request * @ie_len: Length of assoc_ie in octets * @privacy: indicates whether privacy-enabled APs should be used + * @mfp: indicate whether management frame protection is used * @crypto: crypto settings * @key_len: length of WEP key for shared key authentication * @key_idx: index of WEP key for shared key authentication @@ -1485,6 +1486,7 @@ struct cfg80211_connect_params { u8 *ie; size_t ie_len; bool privacy; + enum nl80211_mfp mfp; struct cfg80211_crypto_settings crypto; const u8 *key; u8 key_len, key_idx; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 6c4f703ae890..d01c16220dc5 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -374,8 +374,8 @@ * requests to connect to a specified network but without separating * auth and assoc steps. For this, you need to specify the SSID in a * %NL80211_ATTR_SSID attribute, and can optionally specify the association - * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, - * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, + * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. * Background scan period can optionally be @@ -958,7 +958,7 @@ enum nl80211_commands { * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is * used for the association (&enum nl80211_mfp, represented as a u32); * this attribute can be used - * with %NL80211_CMD_ASSOCIATE request + * with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests * * @NL80211_ATTR_STA_FLAGS2: Attribute containing a * &struct nl80211_sta_flag_update. diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index d543cf152100..df82a5c9faee 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -5932,6 +5932,15 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info) connect.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]); } + if (info->attrs[NL80211_ATTR_USE_MFP]) { + connect.mfp = nla_get_u32(info->attrs[NL80211_ATTR_USE_MFP]); + if (connect.mfp != NL80211_MFP_REQUIRED && + connect.mfp != NL80211_MFP_NO) + return -EINVAL; + } else { + connect.mfp = NL80211_MFP_NO; + } + if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) { connect.channel = ieee80211_get_channel(wiphy, diff --git a/net/wireless/sme.c b/net/wireless/sme.c index d2d26518cdd7..a825dfe12cf7 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -192,7 +192,8 @@ static int cfg80211_conn_do_work(struct wireless_dev *wdev) prev_bssid, params->ssid, params->ssid_len, params->ie, params->ie_len, - false, ¶ms->crypto, + params->mfp != NL80211_MFP_NO, + ¶ms->crypto, params->flags, ¶ms->ht_capa, ¶ms->ht_capa_mask); if (err) -- cgit v1.2.3 From 11c4a075db2f8774d37544342c8cb9752b4db9e1 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Tue, 8 Jan 2013 14:04:07 +0100 Subject: cfg80211: check radar interface combinations To ease further DFS development regarding interface combinations, use the interface combinations structure to test for radar capabilities. Drivers can specify which channel widths they support, and in which modes. Right now only a single AP interface is allowed, but as the DFS code evolves other combinations can be enabled. Signed-off-by: Simon Wunderlich Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 2 ++ include/uapi/linux/nl80211.h | 3 +++ net/wireless/core.c | 12 ++++++++++-- net/wireless/core.h | 7 ++++--- net/wireless/nl80211.c | 3 +++ net/wireless/util.c | 41 ++++++++++++++++++++++++++++++++++++++--- 6 files changed, 60 insertions(+), 8 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f1686d460e6b..970da4420676 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2125,6 +2125,7 @@ struct ieee80211_iface_limit { * @beacon_int_infra_match: In this combination, the beacon intervals * between infrastructure and AP types must match. This is required * only in special cases. + * @radar_detect_widths: bitmap of channel widths supported for radar detection * * These examples can be expressed as follows: * @@ -2177,6 +2178,7 @@ struct ieee80211_iface_combination { u16 max_interfaces; u8 n_limits; bool beacon_int_infra_match; + u8 radar_detect_widths; }; struct mac_address { diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index d01c16220dc5..e6eeb4ba5dc5 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2984,6 +2984,8 @@ enum nl80211_iface_limit_attrs { * the infrastructure network's beacon interval. * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many * different channels may be used within this group. + * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap + * of supported channel widths for radar detection. * @NUM_NL80211_IFACE_COMB: number of attributes * @MAX_NL80211_IFACE_COMB: highest attribute number * @@ -3016,6 +3018,7 @@ enum nl80211_if_combination_attrs { NL80211_IFACE_COMB_MAXNUM, NL80211_IFACE_COMB_STA_AP_BI_MATCH, NL80211_IFACE_COMB_NUM_CHANNELS, + NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, /* keep last */ NUM_NL80211_IFACE_COMB, diff --git a/net/wireless/core.c b/net/wireless/core.c index 747dd9365a44..0e702cdc6043 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -382,8 +382,11 @@ static int wiphy_verify_combinations(struct wiphy *wiphy) c = &wiphy->iface_combinations[i]; - /* Combinations with just one interface aren't real */ - if (WARN_ON(c->max_interfaces < 2)) + /* + * Combinations with just one interface aren't real, + * however we make an exception for DFS. + */ + if (WARN_ON((c->max_interfaces < 2) && !c->radar_detect_widths)) return -EINVAL; /* Need at least one channel */ @@ -398,6 +401,11 @@ static int wiphy_verify_combinations(struct wiphy *wiphy) CFG80211_MAX_NUM_DIFFERENT_CHANNELS)) return -EINVAL; + /* DFS only works on one channel. */ + if (WARN_ON(c->radar_detect_widths && + (c->num_different_channels > 1))) + return -EINVAL; + if (WARN_ON(!c->n_limits)) return -EINVAL; diff --git a/net/wireless/core.h b/net/wireless/core.h index f342267e3620..8396f7671c8d 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -425,7 +425,8 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev, enum nl80211_iftype iftype, struct ieee80211_channel *chan, - enum cfg80211_chan_mode chanmode); + enum cfg80211_chan_mode chanmode, + u8 radar_detect); static inline int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, @@ -433,7 +434,7 @@ cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, enum nl80211_iftype iftype) { return cfg80211_can_use_iftype_chan(rdev, wdev, iftype, NULL, - CHAN_MODE_UNDEFINED); + CHAN_MODE_UNDEFINED, 0); } static inline int @@ -450,7 +451,7 @@ cfg80211_can_use_chan(struct cfg80211_registered_device *rdev, enum cfg80211_chan_mode chanmode) { return cfg80211_can_use_iftype_chan(rdev, wdev, wdev->iftype, - chan, chanmode); + chan, chanmode, 0); } void diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index df82a5c9faee..33de80364c5c 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -856,6 +856,9 @@ static int nl80211_put_iface_combinations(struct wiphy *wiphy, nla_put_u32(msg, NL80211_IFACE_COMB_MAXNUM, c->max_interfaces)) goto nla_put_failure; + if (nla_put_u32(msg, NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, + c->radar_detect_widths)) + goto nla_put_failure; nla_nest_end(msg, nl_combi); } diff --git a/net/wireless/util.c b/net/wireless/util.c index 16d76a807c2f..1c2795d52db0 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -1184,7 +1184,8 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev, enum nl80211_iftype iftype, struct ieee80211_channel *chan, - enum cfg80211_chan_mode chanmode) + enum cfg80211_chan_mode chanmode, + u8 radar_detect) { struct wireless_dev *wdev_iter; u32 used_iftypes = BIT(iftype); @@ -1195,14 +1196,45 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, enum cfg80211_chan_mode chmode; int num_different_channels = 0; int total = 1; + bool radar_required; int i, j; ASSERT_RTNL(); lockdep_assert_held(&rdev->devlist_mtx); + if (WARN_ON(hweight32(radar_detect) > 1)) + return -EINVAL; + + switch (iftype) { + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_AP_VLAN: + case NL80211_IFTYPE_MESH_POINT: + case NL80211_IFTYPE_P2P_GO: + case NL80211_IFTYPE_WDS: + radar_required = !!(chan->flags & IEEE80211_CHAN_RADAR); + break; + case NL80211_IFTYPE_P2P_CLIENT: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_MONITOR: + radar_required = false; + break; + case NL80211_IFTYPE_P2P_DEVICE: + case NUM_NL80211_IFTYPES: + case NL80211_IFTYPE_UNSPECIFIED: + default: + return -EINVAL; + } + + if (radar_required && !radar_detect) + return -EINVAL; + /* Always allow software iftypes */ - if (rdev->wiphy.software_iftypes & BIT(iftype)) + if (rdev->wiphy.software_iftypes & BIT(iftype)) { + if (radar_detect) + return -EINVAL; return 0; + } memset(num, 0, sizeof(num)); memset(used_channels, 0, sizeof(used_channels)); @@ -1275,7 +1307,7 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, used_iftypes |= BIT(wdev_iter->iftype); } - if (total == 1) + if (total == 1 && !radar_detect) return 0; for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) { @@ -1308,6 +1340,9 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, } } + if (radar_detect && !(c->radar_detect_widths & radar_detect)) + goto cont; + /* * Finally check that all iftypes that we're currently * using are actually part of this combination. If they -- cgit v1.2.3