From 130f1b8f35f14d27c43da755f3c9226318c17f57 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 26 Dec 2012 10:39:23 -0700 Subject: PCI: Add PCIe Link Capability link speed and width names Add standard #defines for the Supported Link Speeds field in the PCIe Link Capabilities register. Note that prior to PCIe spec r3.0, these encodings were defined: 0001b 2.5GT/s Link speed supported 0010b 5.0GT/s and 2.5GT/s Link speed supported Starting with spec r3.0, these encodings refer to bits 0 and 1 in the Supported Link Speeds Vector in the Link Capabilities 2 register, and bits 0 and 1 there mean 2.5 GT/s and 5.0 GT/s, respectively. Therefore, code that followed r2.0 and interpreted 0x1 as 2.5GT/s and 0x2 as 5.0GT/s will continue to work, and we can identify a device using the new encodings because it will have a non-zero Link Capabilities 2 register. Signed-off-by: Bjorn Helgaas --- include/uapi/linux/pci_regs.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index 6b7b6f1e2fd6..ebfadc56d1b4 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -458,6 +458,8 @@ #define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */ #define PCI_EXP_LNKCAP 12 /* Link Capabilities */ #define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */ +#define PCI_EXP_LNKCAP_SLS_2_5GB 0x1 /* LNKCAP2 SLS Vector bit 0 (2.5GT/s) */ +#define PCI_EXP_LNKCAP_SLS_5_0GB 0x2 /* LNKCAP2 SLS Vector bit 1 (5.0GT/s) */ #define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */ #define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */ #define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */ -- cgit v1.2.3 From 812089e01b9f65f90fc8fc670d8cce72a0e01fbb Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Sat, 1 Dec 2012 12:37:20 -0800 Subject: PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz Otherwise it fails like this on cards like the Transcend 16GB SDHC card: mmc0: new SDHC card at address b368 mmcblk0: mmc0:b368 SDC 15.0 GiB mmcblk0: error -110 sending status command, retrying mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb0 Tested on my Lenovo x200 laptop. [bhelgaas: changelog] Signed-off-by: Andy Lutomirski Signed-off-by: Bjorn Helgaas Acked-by: Chris Ball CC: Manoj Iyer CC: stable@vger.kernel.org --- drivers/pci/quirks.c | 7 +++++-- include/linux/pci_ids.h | 1 + 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 8f7a6344e79e..0369fb6fc1da 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2725,7 +2725,7 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) if (PCI_FUNC(dev->devfn)) return; /* - * RICOH 0xe823 SD/MMC card reader fails to recognize + * RICOH 0xe822 and 0xe823 SD/MMC card readers fail to recognize * certain types of SD/MMC cards. Lowering the SD base * clock frequency from 200Mhz to 50Mhz fixes this issue. * @@ -2736,7 +2736,8 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) * 0xf9 - Key register for 0x150 * 0xfc - key register for 0xe1 */ - if (dev->device == PCI_DEVICE_ID_RICOH_R5CE823) { + if (dev->device == PCI_DEVICE_ID_RICOH_R5CE822 || + dev->device == PCI_DEVICE_ID_RICOH_R5CE823) { pci_write_config_byte(dev, 0xf9, 0xfc); pci_write_config_byte(dev, 0x150, 0x10); pci_write_config_byte(dev, 0xf9, 0x00); @@ -2763,6 +2764,8 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); #endif /*CONFIG_MMC_RICOH_MMC*/ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 0f8447376ddb..0eb65796bcb9 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1568,6 +1568,7 @@ #define PCI_DEVICE_ID_RICOH_RL5C476 0x0476 #define PCI_DEVICE_ID_RICOH_RL5C478 0x0478 #define PCI_DEVICE_ID_RICOH_R5C822 0x0822 +#define PCI_DEVICE_ID_RICOH_R5CE822 0xe822 #define PCI_DEVICE_ID_RICOH_R5CE823 0xe823 #define PCI_DEVICE_ID_RICOH_R5C832 0x0832 #define PCI_DEVICE_ID_RICOH_R5C843 0x0843 -- cgit v1.2.3