#
# ATA/ATAPI block device driver configuration
#
dep_tristate 'Enhanced ATA/ATAPI device (disk,cdrom,...) support' CONFIG_BLK_DEV_IDE $CONFIG_IDE
if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
   dep_bool '  Use old disk-only driver on primary interface' CONFIG_BLK_DEV_HD_IDE $CONFIG_X86
   define_bool CONFIG_BLK_DEV_HD $CONFIG_BLK_DEV_HD_IDE

   dep_tristate '  ATA disk support' CONFIG_BLK_DEV_IDEDISK $CONFIG_BLK_DEV_IDE
   dep_bool '    Use multi-mode by default' CONFIG_IDEDISK_MULTI_MODE $CONFIG_BLK_DEV_IDEDISK
   dep_bool '    Auto-Geometry Resizing support' CONFIG_IDEDISK_STROKE $CONFIG_BLK_DEV_IDEDISK
   
   dep_tristate '  ATAPI device support (CD-ROM, floppy)' CONFIG_ATAPI $CONFIG_BLK_DEV_IDE
   dep_tristate '    CD-ROM support' CONFIG_BLK_DEV_IDECD $CONFIG_ATAPI $CONFIG_BLK_DEV_IDE
   dep_tristate '    Tape support' CONFIG_BLK_DEV_IDETAPE $CONFIG_ATAPI $CONFIG_BLK_DEV_IDE
   dep_tristate '    Floppy support' CONFIG_BLK_DEV_IDEFLOPPY $CONFIG_ATAPI $CONFIG_BLK_DEV_IDE
   dep_tristate '    SCSI emulation support' CONFIG_BLK_DEV_IDESCSI $CONFIG_ATAPI $CONFIG_BLK_DEV_IDE $CONFIG_SCSI
   
   dep_tristate '  PCMCIA/CardBus support' CONFIG_BLK_DEV_IDECS $CONFIG_BLK_DEV_IDE $CONFIG_PCMCIA

   comment 'ATA host controller support'
   dep_bool '  RZ1000 bugfix/support' CONFIG_BLK_DEV_RZ1000 $CONFIG_X86
   dep_bool '  CMD640 bugfix/support' CONFIG_BLK_DEV_CMD640 $CONFIG_X86
   dep_bool '    CMD640 enhanced support' CONFIG_BLK_DEV_CMD640_ENHANCED $CONFIG_BLK_DEV_CMD640
   dep_bool '  ISA-PNP support' CONFIG_BLK_DEV_ISAPNP $CONFIG_ISAPNP
   if [ "$CONFIG_PCI" != "n" ]; then
      comment '  PCI host controller support'
      dep_bool '    Boot off-board controllers first' CONFIG_BLK_DEV_OFFBOARD $CONFIG_PCI
      dep_bool '    Sharing PCI ATA interrupts' CONFIG_IDEPCI_SHARE_IRQ $CONFIG_PCI
      dep_bool '    Generic PCI bus-master DMA support' CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_PCI
      dep_bool '      Use PCI DMA by default when available' CONFIG_IDEDMA_PCI_AUTO $CONFIG_BLK_DEV_IDEDMA_PCI
      dep_bool '      Enable DMA only for disks ' CONFIG_IDEDMA_ONLYDISK $CONFIG_IDEDMA_PCI_AUTO
      define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_PCI
      dep_bool '    Tagged command queueing (DANGEROUS)' CONFIG_BLK_DEV_IDE_TCQ $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_EXPERIMENTAL
      dep_bool '      TCQ on by default' CONFIG_BLK_DEV_IDE_TCQ_DEFAULT $CONFIG_BLK_DEV_IDE_TCQ
      if [ "$CONFIG_BLK_DEV_IDE_TCQ" != "n" ]; then
         int '      Default queue depth' CONFIG_BLK_DEV_IDE_TCQ_DEPTH 32
      fi
      dep_bool '    Good-Bad DMA Model-Firmware (EXPERIMENTAL)' CONFIG_IDEDMA_NEW_DRIVE_LISTINGS $CONFIG_EXPERIMENTAL
      dep_bool '    Acard (Artop) chipset support' CONFIG_BLK_DEV_AEC62XX $CONFIG_BLK_DEV_IDEDMA_PCI
      dep_mbool '      ATP865 burst mode' CONFIG_AEC6280_BURST $CONFIG_BLK_DEV_AEC62XX
      dep_bool '    ALI M15x3 chipset support' CONFIG_BLK_DEV_ALI15X3 $CONFIG_BLK_DEV_IDEDMA_PCI
      dep_mbool '      ALI M15x3 WDC support (DANGEROUS)' CONFIG_WDC_ALI15X3 $CONFIG_BLK_DEV_ALI15X3 $CONFIG_EXPERIMENTAL
      dep_bool '    AMD and nVidia chipset support' CONFIG_BLK_DEV_AMD74XX $CONFIG_BLK_DEV_IDEDMA_PCI
      dep_bool '    CMD64X chipset support' CONFIG_BLK_DEV_CMD64X $CONFIG_BLK_DEV_IDEDMA_PCI
      dep_bool '    CY82C693 chipset support' CONFIG_BLK_DEV_CY82C693 $CONFIG_BLK_DEV_IDEDMA_PCI
      dep_bool '    Cyrix CS5530 MediaGX chipset support' CONFIG_BLK_DEV_CS5530 $CONFIG_BLK_DEV_IDEDMA_PCI
      dep_bool '    HPT34X chipset support' CONFIG_BLK_DEV_HPT34X $CONFIG_BLK_DEV_IDEDMA_PCI
      dep_mbool '      HPT34X AUTODMA support (EXPERIMENTAL)' CONFIG_HPT34X_AUTODMA $CONFIG_BLK_DEV_HPT34X $CONFIG_EXPERIMENTAL
      dep_bool '    HPT36X/37X chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI
      dep_bool '    Intel and Efar (SMsC) chipset support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI
      if [ "$CONFIG_MIPS_ITE8172" = "y" -o "$CONFIG_MIPS_IVR" = "y" ]; then
         dep_mbool '    IT8172 IDE support' CONFIG_BLK_DEV_IT8172 $CONFIG_BLK_DEV_IDEDMA_PCI
         dep_mbool '      IT8172 IDE Tuning support' CONFIG_IT8172_TUNING $CONFIG_BLK_DEV_IT8172 $CONFIG_IDEDMA_PCI_AUTO
      fi
      dep_bool '    NS87415 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_NS87415 $CONFIG_BLK_DEV_IDEDMA_PCI
      dep_mbool '    OPTi 82C621 chipset enhanced support (EXPERIMENTAL)' CONFIG_BLK_DEV_OPTI621 $CONFIG_PCI $CONFIG_EXPERIMENTAL
      dep_bool '    PROMISE PDC202{46|62|65|67|68|69|70} support' CONFIG_BLK_DEV_PDC202XX $CONFIG_BLK_DEV_IDEDMA_PCI
      dep_bool '      Special UDMA Feature' CONFIG_PDC202XX_BURST $CONFIG_BLK_DEV_PDC202XX
      dep_bool '      Special FastTrak Feature' CONFIG_PDC202XX_FORCE $CONFIG_BLK_DEV_PDC202XX
      dep_bool '    ServerWorks OSB4/CSB5 chipsets support' CONFIG_BLK_DEV_SVWKS $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
      dep_bool '    SiS5513 chipset support' CONFIG_BLK_DEV_SIS5513 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
      dep_bool '    Tekram TRM290 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_TRM290 $CONFIG_BLK_DEV_IDEDMA_PCI
      dep_bool '    VIA chipset support' CONFIG_BLK_DEV_VIA82CXXX $CONFIG_BLK_DEV_IDEDMA_PCI
      dep_bool '    Winbond SL82c105 support' CONFIG_BLK_DEV_SL82C105 $CONFIG_BLK_DEV_IDEDMA_PCI
   fi
   if [ "$CONFIG_ALL_PPC" = "y" ]; then
      bool '    Builtin PowerMac IDE support' CONFIG_BLK_DEV_IDE_PMAC
      dep_bool '      PowerMac IDE DMA support' CONFIG_BLK_DEV_IDEDMA_PMAC $CONFIG_BLK_DEV_IDE_PMAC
      dep_bool '        Use DMA by default' CONFIG_BLK_DEV_IDEDMA_PMAC_AUTO $CONFIG_BLK_DEV_IDEDMA_PMAC
      if [ "$CONFIG_BLK_DEV_IDE_PMAC" = "y" ]; then
	 define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_PMAC
      fi
   fi
   if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
      dep_bool '    ICS IDE interface support' CONFIG_BLK_DEV_IDE_ICSIDE $CONFIG_ARCH_ACORN
      dep_bool '      ICS DMA support' CONFIG_BLK_DEV_IDEDMA_ICS $CONFIG_BLK_DEV_IDE_ICSIDE
      dep_bool '        Use ICS DMA by default' CONFIG_IDEDMA_ICS_AUTO $CONFIG_BLK_DEV_IDEDMA_ICS
      define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_ICS
      dep_bool '    RapIDE interface support' CONFIG_BLK_DEV_IDE_RAPIDE $CONFIG_ARCH_ACORN
   fi
   if [ "$CONFIG_AMIGA" = "y" ]; then
      dep_bool '  Amiga Gayle IDE interface support' CONFIG_BLK_DEV_GAYLE $CONFIG_AMIGA
      dep_mbool '    Amiga IDE Doubler support (EXPERIMENTAL)' CONFIG_BLK_DEV_IDEDOUBLER $CONFIG_BLK_DEV_GAYLE $CONFIG_EXPERIMENTAL
   fi
   if [ "$CONFIG_ZORRO" = "y" -a "$CONFIG_EXPERIMENTAL" = "y" ]; then
      dep_mbool '  Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)' CONFIG_BLK_DEV_BUDDHA $CONFIG_ZORRO $CONFIG_EXPERIMENTAL
   fi
   if [ "$CONFIG_ATARI" = "y" ]; then
      dep_bool '  Falcon IDE interface support' CONFIG_BLK_DEV_FALCON_IDE $CONFIG_ATARI
   fi
   if [ "$CONFIG_MAC" = "y" ]; then
      dep_bool '  Macintosh Quadra/Powerbook IDE interface support' CONFIG_BLK_DEV_MAC_IDE $CONFIG_MAC
   fi
   if [ "$CONFIG_Q40" = "y" ]; then
      dep_bool '  Q40/Q60 IDE interface support' CONFIG_BLK_DEV_Q40IDE $CONFIG_Q40
   fi
   if [ "$CONFIG_8xx" = "y" ]; then
      dep_bool '  MPC8xx IDE support' CONFIG_BLK_DEV_MPC8xx_IDE $CONFIG_8xx
   fi

   if [ "$CONFIG_BLK_DEV_MPC8xx_IDE" = "y" ]; then
      choice 'Type of MPC8xx IDE interface'		\
	     "8xx_PCCARD	CONFIG_IDE_8xx_PCCARD	\
	      8xx_DIRECT	CONFIG_IDE_8xx_DIRECT	\
	      EXT_DIRECT	CONFIG_IDE_EXT_DIRECT"	8xx_PCCARD
   fi

   # assume no ISA -> also no VLB
   dep_bool '  ISA/VLB IDE chipset support' CONFIG_IDE_CHIPSETS $CONFIG_ISA
   if [ "$CONFIG_IDE_CHIPSETS" = "y" ]; then
      comment 'Note: most of these also require special kernel boot parameters'
      bool '    ALI M14xx support' CONFIG_BLK_DEV_ALI14XX
      bool '    DTC-2278 support' CONFIG_BLK_DEV_DTC2278
      bool '    Holtek HT6560B support' CONFIG_BLK_DEV_HT6560B
      if [ "$CONFIG_BLK_DEV_IDEDISK" = "y" -a "$CONFIG_EXPERIMENTAL" = "y" ]; then
	 bool '    PROMISE DC4030 support (EXPERIMENTAL)' CONFIG_BLK_DEV_PDC4030
      fi
      dep_tristate '    QDI QD65xx support' CONFIG_BLK_DEV_QD65XX $CONFIG_BLK_DEV_IDE
      bool '    UMC-8672 support' CONFIG_BLK_DEV_UMC8672
   fi
   if [ "$CONFIG_BLK_DEV_IDEDMA_PCI" != "n" -o \
        "$CONFIG_BLK_DEV_IDEDMA_PMAC" != "n" -o \
        "$CONFIG_BLK_DEV_IDEDMA_ICS" != "n" ]; then
      bool '  IGNORE word93 Validation BITS' CONFIG_IDEDMA_IVB
   fi
else
   bool 'Old disk only (MFM/RLL/IDE) driver' CONFIG_BLK_DEV_HD_ONLY
   define_bool CONFIG_BLK_DEV_HD $CONFIG_BLK_DEV_HD_ONLY
fi

if [ "$CONFIG_IDEDMA_PCI_AUTO" = "y" -o \
     "$CONFIG_BLK_DEV_IDEDMA_PMAC_AUTO" = "y" -o \
     "$CONFIG_IDEDMA_ICS_AUTO" = "y" ]; then
   define_bool CONFIG_IDEDMA_AUTO y
else
   define_bool CONFIG_IDEDMA_AUTO n
fi

dep_tristate 'Support for software RAID controllers (EXPERIMENTAL)' CONFIG_BLK_DEV_ATARAID $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL
dep_tristate '   Support Promise (Fasttrak(tm)) (EXPERIMENTAL)' CONFIG_BLK_DEV_ATARAID_PDC $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL $CONFIG_BLK_DEV_ATARAID
dep_tristate '   Highpoint 370 EXPERIMENTAL)' CONFIG_BLK_DEV_ATARAID_HPT $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL $CONFIG_BLK_DEV_ATARAID