stm32/boards/NUCLEO_WB55/rfcore_firmware.py: Fix bad variable name.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

1 files changed, 12 insertions, 12 deletions

diff --git a/ports/stm32/boards/NUCLEO_WB55/rfcore_firmware.py b/ports/stm32/boards/NUCLEO_WB55/rfcore_firmware.py
index de98d9743..3358b246d 100644
--- a/ports/stm32/boards/NUCLEO_WB55/rfcore_firmware.py
+++ b/ports/stm32/boards/NUCLEO_WB55/rfcore_firmware.py
@@ -370,18 +370,18 @@ def resume():
         return _write_failure_state(REASON_RFCORE_NOT_CONFIGURED)
 
     while True:
-        _STATE_id = _read_state()
+        state = _read_state()
 
-        if _STATE_id == _STATE_IDLE:
+        if state == _STATE_IDLE:
             log("Firmware update complete")
             return 0
 
-        elif _STATE_id == _STATE_FAILED:
+        elif state == _STATE_FAILED:
             log("Firmware update failed")
             return _read_failure_reason()
 
         # Keep calling GET_STATE until error or FUS.
-        elif _STATE_id == _STATE_WAITING_FOR_FUS:
+        elif state == _STATE_WAITING_FOR_FUS:
             log("Querying FUS state")
             status, result = fus_get_state()
             log("FUS state: {} {}", status, result)
@@ -395,7 +395,7 @@ def resume():
                 _write_state(_STATE_CHECK_UPDATES)
 
         # Keep trying to start the WS until !fus_active() (or error).
-        elif _STATE_id == _STATE_WAITING_FOR_WS:
+        elif state == _STATE_WAITING_FOR_WS:
             if stm.rfcore_status() != _MAGIC_FUS_ACTIVE:
                 log("WS active")
                 _write_state(_STATE_IDLE)
@@ -410,7 +410,7 @@ def resume():
                     _write_failure_state(REASON_NO_WS)
 
         # Sequence the FUS 1.0.2 -> FUS 1.1.0 -> WS (depending on what's available).
-        elif _STATE_id == _STATE_CHECK_UPDATES:
+        elif state == _STATE_CHECK_UPDATES:
             log("Checking for updates")
             fus_version = stm.rfcore_fw_version(_FW_VERSION_FUS)
             log("FUS version {}", fus_version)
@@ -448,13 +448,13 @@ def resume():
         # This shouldn't happen - the flash write should always complete and
         # move straight onto the COPIED state. Failure here indicates that
         # the rfcore is misconfigured or the WS firmware was not deleted first.
-        elif _STATE_id == _STATE_COPYING_FUS or _STATE_id == _STATE_COPYING_WS:
+        elif state == _STATE_COPYING_FUS or state == _STATE_COPYING_WS:
             log("Flash copy failed mid-write")
             _write_failure_state(REASON_FLASH_COPY_FAILED)
 
         # Flash write completed, we should immediately see GET_STATE return 0,0
         # so we can start the FUS install.
-        elif _STATE_id == _STATE_COPIED_FUS:
+        elif state == _STATE_COPIED_FUS:
             if fus_is_idle():
                 log("FUS copy complete, installing")
                 _write_state(_STATE_INSTALLING_FUS)
@@ -466,7 +466,7 @@ def resume():
         # Keep polling the state until we see a 0,0 (success) or non-transient
         # error. In general we should expect to see (16,0) several times,
         # followed by a (255,0), followed by (0, 0).
-        elif _STATE_id == _STATE_INSTALLING_FUS:
+        elif state == _STATE_INSTALLING_FUS:
             log("Installing FUS...")
             status, result = fus_get_state()
             log("FUS state: {} {}", status, result)
@@ -492,7 +492,7 @@ def resume():
         # Keep polling the state until we see 0,0 or failure (1,0). Any other
         # result means retry (but the docs say that 0 and 1 are the only
         # status values).
-        elif _STATE_id == _STATE_DELETING_WS:
+        elif state == _STATE_DELETING_WS:
             log("Deleting WS...")
             status, result = fus_get_state()
             log("FUS state: {} {}", status, result)
@@ -508,7 +508,7 @@ def resume():
                 _write_failure_state(REASON_WS_DELETION_FAILED)
 
         # As for _STATE_COPIED_FUS above. We should immediately see 0,0.
-        elif _STATE_id == _STATE_COPIED_WS:
+        elif state == _STATE_COPIED_WS:
             if fus_is_idle():
                 log("WS copy complete, installing")
                 _write_state(_STATE_INSTALLING_WS)
@@ -518,7 +518,7 @@ def resume():
                 _write_failure_state(REASON_FLASH_WS_BAD_STATE)
 
         # As for _STATE_INSTALLING_FUS above.
-        elif _STATE_id == _STATE_INSTALLING_WS:
+        elif state == _STATE_INSTALLING_WS:
             log("Installing WS...")
             status, result = fus_get_state()
             log("FUS state: {} {}", status, result)