drivers, cc3k: Move cc3000 driver from stmhal to drivers directory.

1 files changed, 248 insertions, 0 deletions

diff --git a/drivers/cc3000/inc/nvmem.h b/drivers/cc3000/inc/nvmem.h
new file mode 100644
index 000000000..1bd1b610b
--- /dev/null
+++ b/drivers/cc3000/inc/nvmem.h
@@ -0,0 +1,248 @@
+/*****************************************************************************
+*
+*  nvmem.h  - CC3000 Host Driver Implementation.
+*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the   
+*    distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*****************************************************************************/
+#ifndef __NVRAM_H__
+#define __NVRAM_H__
+
+#include "cc3000_common.h"
+
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+
+//*****************************************************************************
+//
+//! \addtogroup nvmem_api
+//! @{
+//
+//*****************************************************************************
+
+/****************************************************************************
+**
+**	Definitions for File IDs
+**	
+****************************************************************************/
+/* NVMEM file ID - system files*/
+#define NVMEM_NVS_FILEID 							(0)
+#define NVMEM_NVS_SHADOW_FILEID 					(1)
+#define NVMEM_WLAN_CONFIG_FILEID 					(2)
+#define NVMEM_WLAN_CONFIG_SHADOW_FILEID 			(3)
+#define NVMEM_WLAN_DRIVER_SP_FILEID					(4)
+#define NVMEM_WLAN_FW_SP_FILEID						(5)
+#define NVMEM_MAC_FILEID 							(6)
+#define NVMEM_FRONTEND_VARS_FILEID 					(7)
+#define NVMEM_IP_CONFIG_FILEID 						(8)
+#define NVMEM_IP_CONFIG_SHADOW_FILEID 				(9)
+#define NVMEM_BOOTLOADER_SP_FILEID 					(10)
+#define NVMEM_RM_FILEID			 					(11)
+
+/* NVMEM file ID - user files*/
+#define NVMEM_AES128_KEY_FILEID	 					(12)
+#define NVMEM_SHARED_MEM_FILEID	 					(13)
+
+/*  max entry in order to invalid nvmem              */
+#define NVMEM_MAX_ENTRY                              (16)
+
+
+//*****************************************************************************
+//
+//!  nvmem_read
+//!
+//!  @param  ulFileId   nvmem file id:\n
+//!                     NVMEM_NVS_FILEID, NVMEM_NVS_SHADOW_FILEID,
+//!                     NVMEM_WLAN_CONFIG_FILEID, NVMEM_WLAN_CONFIG_SHADOW_FILEID,
+//!                     NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID,
+//!                     NVMEM_MAC_FILEID, NVMEM_FRONTEND_VARS_FILEID,
+//!                     NVMEM_IP_CONFIG_FILEID, NVMEM_IP_CONFIG_SHADOW_FILEID,
+//!                     NVMEM_BOOTLOADER_SP_FILEID, NVMEM_RM_FILEID,
+//!                     and user files 12-15.
+//!  @param  ulLength    number of bytes to read 
+//!  @param  ulOffset    ulOffset in file from where to read  
+//!  @param  buff        output buffer pointer
+//!
+//!  @return       on success 0, error otherwise.
+//!
+//!  @brief       Reads data from the file referred by the ulFileId parameter. 
+//!               Reads data from file ulOffset till length. Err if the file can't
+//!               be used, is invalid, or if the read is out of bounds. 
+//!	 
+//*****************************************************************************
+
+extern INT32 nvmem_read(UINT32 file_id, UINT32 length, UINT32 offset, UINT8 *buff);
+
+//*****************************************************************************
+//
+//!  nvmem_write
+//!
+//!  @param  ulFileId nvmem file id:\n
+//!                   NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID,
+//!                   NVMEM_MAC_FILEID, NVMEM_BOOTLOADER_SP_FILEID,
+//!                   and user files 12-15.
+//!  @param  ulLength       number of bytes to write  
+//!  @param  ulEntryOffset  offset in file to start write operation from 
+//!  @param  buff           data to write
+//!
+//!  @return       on success 0, error otherwise.
+//!
+//!  @brief       Write data to nvmem.
+//!               writes data to file referred by the ulFileId parameter. 
+//!               Writes data to file ulOffset till ulLength.The file id will be 
+//!               marked invalid till the write is done. The file entry doesn't
+//!               need to be valid - only allocated.
+//!	 
+//*****************************************************************************
+
+extern INT32 nvmem_write(UINT32 ulFileId, UINT32 ulLength, UINT32 ulEntryOffset, UINT8 *buff);
+
+
+//*****************************************************************************
+//
+//!  nvmem_set_mac_address
+//!
+//!  @param  mac   mac address to be set
+//!
+//!  @return       on success 0, error otherwise.
+//!
+//!  @brief       Write MAC address to EEPROM. 
+//!               mac address as appears over the air (OUI first)
+//!	 
+//*****************************************************************************
+extern UINT8 nvmem_set_mac_address(UINT8 *mac);
+
+
+//*****************************************************************************
+//
+//!  nvmem_get_mac_address
+//!
+//!  @param[out]  mac   mac address  
+//!
+//!  @return       on success 0, error otherwise.
+//!
+//!  @brief       Read MAC address from EEPROM. 
+//!               mac address as appears over the air (OUI first)
+//!	 
+//*****************************************************************************
+extern UINT8 nvmem_get_mac_address(UINT8 *mac);
+
+
+//*****************************************************************************
+//
+//!  nvmem_write_patch
+//!
+//!  @param  ulFileId   nvmem file id:\n
+//!                     NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID,
+//!  @param  spLength   number of bytes to write 
+//!  @param  spData     SP data to write
+//!
+//!  @return       on success 0, error otherwise.
+//!
+//!  @brief      program a patch to a specific file ID. 
+//!              The SP data is assumed to be organized in 2-dimensional.
+//!              Each line is SP_PORTION_SIZE bytes long. Actual programming is 
+//!              applied in SP_PORTION_SIZE bytes portions.
+//!	 
+//*****************************************************************************
+extern UINT8 nvmem_write_patch(UINT32 ulFileId, UINT32 spLength, const UINT8 *spData);
+
+
+//*****************************************************************************
+//
+//!  nvmem_read_sp_version
+//!
+//!  @param[out]  patchVer    first number indicates package ID and the second 
+//!                           number indicates package build number   
+//!
+//!  @return       on success 0, error otherwise.
+//!
+//!  @brief      Read patch version. read package version (WiFi FW patch, 
+//!              driver-supplicant-NS patch, bootloader patch)
+//!	 
+//*****************************************************************************
+#ifndef CC3000_TINY_DRIVER 
+extern UINT8 nvmem_read_sp_version(UINT8* patchVer);
+#endif
+
+//*****************************************************************************
+//
+//!  nvmem_create_entry
+//!
+//!  @param       ulFileId    nvmem file Id:\n
+//!                           * NVMEM_AES128_KEY_FILEID: 12
+//!                           * NVMEM_SHARED_MEM_FILEID: 13
+//!                           * and fileIDs 14 and 15
+//!  @param       ulNewLen    entry ulLength  
+//!
+//!  @return       on success 0, error otherwise.
+//!
+//!  @brief      Create new file entry and allocate space on the NVMEM. 
+//!              Applies only to user files.
+//!              Modify the size of file.
+//!              If the entry is unallocated - allocate it to size 
+//!              ulNewLen (marked invalid).
+//!              If it is allocated then deallocate it first.
+//!              To just mark the file as invalid without resizing - 
+//!              set ulNewLen=0.
+//!	 
+//*****************************************************************************
+extern INT32 nvmem_create_entry(UINT32 file_id, UINT32 newlen);
+
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+
+
+//*****************************************************************************
+//
+// Close the Doxygen group.
+//! @}
+//
+//*****************************************************************************
+
+
+#ifdef  __cplusplus
+}
+#endif // __cplusplus
+
+#endif // __NVRAM_H__