diff options
| -rw-r--r-- | stmhal/boards/openocd_stm32l4.cfg | 42 |
1 files changed, 42 insertions, 0 deletions
diff --git a/stmhal/boards/openocd_stm32l4.cfg b/stmhal/boards/openocd_stm32l4.cfg new file mode 100644 index 000000000..3608b334b --- /dev/null +++ b/stmhal/boards/openocd_stm32l4.cfg @@ -0,0 +1,42 @@ +# This script configures OpenOCD for use with an ST-Link V2 programmer/debugger +# and an STM32L4 target microcontroller. +# +# To flash your firmware: +# +# $ openocd -f openocd_stm32l4.cfg \ +# -c "stm_flash build-BOARD/firmware0.bin build-BOARD/firmware1.bin" +# +# For a gdb server on port 3333: +# +# $ openocd -f openocd_stm32l4.cfg + + +source [find interface/stlink-v2-1.cfg] +transport select hla_swd +source [find target/stm32l4x.cfg] +reset_config srst_only +init + +proc stm_flash { BIN0 BIN1 } { + reset halt + sleep 100 + wait_halt 2 + flash write_image erase $BIN0 0x08000000 + sleep 100 + verify_image $BIN0 0x08000000 + sleep 100 + flash write_image erase $BIN1 0x08004000 + sleep 100 + verify_image $BIN1 0x08004000 + sleep 100 + reset run + shutdown +} + +proc stm_erase {} { + reset halt + sleep 100 + stm32l4x mass_erase 0 + sleep 100 + shutdown +} |