diff options
| -rw-r--r-- | ports/mimxrt/boards/SEEED_ARCH_MIX/SEEED_ARCH_MIX_flexspi_nor_config.h | 258 | ||||
| -rw-r--r-- | ports/mimxrt/boards/SEEED_ARCH_MIX/qspi_nor_flash_config.c | 136 |
2 files changed, 0 insertions, 394 deletions
diff --git a/ports/mimxrt/boards/SEEED_ARCH_MIX/SEEED_ARCH_MIX_flexspi_nor_config.h b/ports/mimxrt/boards/SEEED_ARCH_MIX/SEEED_ARCH_MIX_flexspi_nor_config.h deleted file mode 100644 index 33698a34d..000000000 --- a/ports/mimxrt/boards/SEEED_ARCH_MIX/SEEED_ARCH_MIX_flexspi_nor_config.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - * Copyright 2019 NXP. - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -// Based on tinyusb/hw/bsp/teensy_40/evkmimxrt1020_flexspi_nor_config.h - -#ifndef __SEEED_ARCH_MIX_FLEXSPI_NOR_CONFIG__ -#define __SEEED_ARCH_MIX_FLEXSPI_NOR_CONFIG__ - -#include <stdint.h> -#include <stdbool.h> -#include "fsl_common.h" - -/*! @name Driver version */ -/*@{*/ -/*! @brief XIP_BOARD driver version 2.0.0. */ -#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) -/*@}*/ - -/* FLEXSPI memory config block related defintions */ -#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian -#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 -#define FLEXSPI_CFG_BLK_SIZE (512) - -/* FLEXSPI Feature related definitions */ -#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 - -/* Lookup table related defintions */ -#define CMD_INDEX_READ 0 -#define CMD_INDEX_READSTATUS 1 -#define CMD_INDEX_WRITEENABLE 2 -#define CMD_INDEX_WRITE 4 - -#define CMD_LUT_SEQ_IDX_READ 0 -#define CMD_LUT_SEQ_IDX_READSTATUS 1 -#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 -#define CMD_LUT_SEQ_IDX_WRITE 9 - -#define CMD_SDR 0x01 -#define CMD_DDR 0x21 -#define RADDR_SDR 0x02 -#define RADDR_DDR 0x22 -#define CADDR_SDR 0x03 -#define CADDR_DDR 0x23 -#define MODE1_SDR 0x04 -#define MODE1_DDR 0x24 -#define MODE2_SDR 0x05 -#define MODE2_DDR 0x25 -#define MODE4_SDR 0x06 -#define MODE4_DDR 0x26 -#define MODE8_SDR 0x07 -#define MODE8_DDR 0x27 -#define WRITE_SDR 0x08 -#define WRITE_DDR 0x28 -#define READ_SDR 0x09 -#define READ_DDR 0x29 -#define LEARN_SDR 0x0A -#define LEARN_DDR 0x2A -#define DATSZ_SDR 0x0B -#define DATSZ_DDR 0x2B -#define DUMMY_SDR 0x0C -#define DUMMY_DDR 0x2C -#define DUMMY_RWDS_SDR 0x0D -#define DUMMY_RWDS_DDR 0x2D -#define JMP_ON_CS 0x1F -#define STOP 0 - -#define FLEXSPI_1PAD 0 -#define FLEXSPI_2PAD 1 -#define FLEXSPI_4PAD 2 -#define FLEXSPI_8PAD 3 - -#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ - (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ - FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - -// !@brief Definitions for FlexSPI Serial Clock Frequency -typedef enum _FlexSpiSerialClockFreq -{ - kFlexSpiSerialClk_30MHz = 1, - kFlexSpiSerialClk_50MHz = 2, - kFlexSpiSerialClk_60MHz = 3, - kFlexSpiSerialClk_75MHz = 4, - kFlexSpiSerialClk_80MHz = 5, - kFlexSpiSerialClk_100MHz = 6, - kFlexSpiSerialClk_133MHz = 7, - kFlexSpiSerialClk_166MHz = 8, - kFlexSpiSerialClk_200MHz = 9, -} flexspi_serial_clk_freq_t; - -// !@brief FlexSPI clock configuration type -enum -{ - kFlexSpiClk_SDR, // !< Clock configure for SDR mode - kFlexSpiClk_DDR, // !< Clock configurat for DDR mode -}; - -// !@brief FlexSPI Read Sample Clock Source definition -typedef enum _FlashReadSampleClkSource -{ - kFlexSPIReadSampleClk_LoopbackInternally = 0, - kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, - kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, - kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, -} flexspi_read_sample_clk_t; - -// !@brief Misc feature bit definitions -enum -{ - kFlexSpiMiscOffset_DiffClkEnable = 0, // !< Bit for Differential clock enable - kFlexSpiMiscOffset_Ck2Enable = 1, // !< Bit for CK2 enable - kFlexSpiMiscOffset_ParallelEnable = 2, // !< Bit for Parallel mode enable - kFlexSpiMiscOffset_WordAddressableEnable = 3, // !< Bit for Word Addressable enable - kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, // !< Bit for Safe Configuration Frequency enable - kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, // !< Bit for Pad setting override enable - kFlexSpiMiscOffset_DdrModeEnable = 6, // !< Bit for DDR clock confiuration indication. -}; - -// !@brief Flash Type Definition -enum -{ - kFlexSpiDeviceType_SerialNOR = 1, // !< Flash devices are Serial NOR - kFlexSpiDeviceType_SerialNAND = 2, // !< Flash devices are Serial NAND - kFlexSpiDeviceType_SerialRAM = 3, // !< Flash devices are Serial RAM/HyperFLASH - kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, // !< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND - kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, // !< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs -}; - -// !@brief Flash Pad Definitions -enum -{ - kSerialFlash_1Pad = 1, - kSerialFlash_2Pads = 2, - kSerialFlash_4Pads = 4, - kSerialFlash_8Pads = 8, -}; - -// !@brief FlexSPI LUT Sequence structure -typedef struct _lut_sequence -{ - uint8_t seqNum; // !< Sequence Number, valid number: 1-16 - uint8_t seqId; // !< Sequence Index, valid number: 0-15 - uint16_t reserved; -} flexspi_lut_seq_t; - -// !@brief Flash Configuration Command Type -enum -{ - kDeviceConfigCmdType_Generic, // !< Generic command, for example: configure dummy cycles, drive strength, etc - kDeviceConfigCmdType_QuadEnable, // !< Quad Enable command - kDeviceConfigCmdType_Spi2Xpi, // !< Switch from SPI to DPI/QPI/OPI mode - kDeviceConfigCmdType_Xpi2Spi, // !< Switch from DPI/QPI/OPI to SPI mode - kDeviceConfigCmdType_Spi2NoCmd, // !< Switch to 0-4-4/0-8-8 mode - kDeviceConfigCmdType_Reset, // !< Reset device command -}; - -// !@brief FlexSPI Memory Configuration Block -typedef struct _FlexSPIConfig -{ - uint32_t tag; // !< [0x000-0x003] Tag, fixed value 0x42464346UL - uint32_t version; // !< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix - uint32_t reserved0; // !< [0x008-0x00b] Reserved for future use - uint8_t readSampleClkSrc; // !< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 - uint8_t csHoldTime; // !< [0x00d-0x00d] CS hold time, default value: 3 - uint8_t csSetupTime; // !< [0x00e-0x00e] CS setup time, default value: 3 - uint8_t columnAddressWidth; // !< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For - // ! Serial NAND, need to refer to datasheet - uint8_t deviceModeCfgEnable; // !< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable - uint8_t deviceModeType; // !< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, - // ! Generic configuration, etc. - uint16_t waitTimeCfgCommands; // !< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for - // ! DPI/QPI/OPI switch or reset command - flexspi_lut_seq_t deviceModeSeq; // !< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt - // ! sequence number, [31:16] Reserved - uint32_t deviceModeArg; // !< [0x018-0x01b] Argument/Parameter for device configuration - uint8_t configCmdEnable; // !< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable - uint8_t configModeType[3]; // !< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe - flexspi_lut_seq_t - configCmdSeqs[3]; // !< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq - uint32_t reserved1; // !< [0x02c-0x02f] Reserved for future use - uint32_t configCmdArgs[3]; // !< [0x030-0x03b] Arguments/Parameters for device Configuration commands - uint32_t reserved2; // !< [0x03c-0x03f] Reserved for future use - uint32_t controllerMiscOption; // !< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more - // ! details - uint8_t deviceType; // !< [0x044-0x044] Device Type: See Flash Type Definition for more details - uint8_t sflashPadType; // !< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal - uint8_t serialClkFreq; // !< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot - // ! Chapter for more details - uint8_t lutCustomSeqEnable; // !< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot - // ! be done using 1 LUT sequence, currently, only applicable to HyperFLASH - uint32_t reserved3[2]; // !< [0x048-0x04f] Reserved for future use - uint32_t sflashA1Size; // !< [0x050-0x053] Size of Flash connected to A1 - uint32_t sflashA2Size; // !< [0x054-0x057] Size of Flash connected to A2 - uint32_t sflashB1Size; // !< [0x058-0x05b] Size of Flash connected to B1 - uint32_t sflashB2Size; // !< [0x05c-0x05f] Size of Flash connected to B2 - uint32_t csPadSettingOverride; // !< [0x060-0x063] CS pad setting override value - uint32_t sclkPadSettingOverride; // !< [0x064-0x067] SCK pad setting override value - uint32_t dataPadSettingOverride; // !< [0x068-0x06b] data pad setting override value - uint32_t dqsPadSettingOverride; // !< [0x06c-0x06f] DQS pad setting override value - uint32_t timeoutInMs; // !< [0x070-0x073] Timeout threshold for read status command - uint32_t commandInterval; // !< [0x074-0x077] CS deselect interval between two commands - uint16_t dataValidTime[2]; // !< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns - uint16_t busyOffset; // !< [0x07c-0x07d] Busy offset, valid value: 0-31 - uint16_t busyBitPolarity; // !< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - - // ! busy flag is 0 when flash device is busy - uint32_t lookupTable[64]; // !< [0x080-0x17f] Lookup table holds Flash command sequences - flexspi_lut_seq_t lutCustomSeq[12]; // !< [0x180-0x1af] Customizable LUT Sequences - uint32_t reserved4[4]; // !< [0x1b0-0x1bf] Reserved for future use -} flexspi_mem_config_t; - -/* */ -#define NOR_CMD_LUT_SEQ_IDX_READ_NORMAL 0 -#define NOR_CMD_LUT_SEQ_IDX_READSTATUSREG 1 -#define NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD 2 -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE 3 -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 4 -#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 -#define NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG 6 -#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD 7 -#define NOR_CMD_LUT_SEQ_IDX_READID 8 -#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM 9 -#define NOR_CMD_LUT_SEQ_IDX_ENTERQPI 10 -#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 -#define NOR_CMD_LUT_SEQ_IDX_EXITQPI 12 - -/* - * Serial NOR configuration block - */ -typedef struct _flexspi_nor_config -{ - flexspi_mem_config_t memConfig; // !< Common memory configuration info via FlexSPI - uint32_t pageSize; // !< Page size of Serial NOR - uint32_t sectorSize; // !< Sector size of Serial NOR - uint8_t ipcmdSerialClkFreq; // !< Clock frequency for IP command - uint8_t isUniformBlockSize; // !< Sector/Block size is the same - uint8_t reserved0[2]; // !< Reserved for future use - uint8_t serialNorType; // !< Serial NOR Flash type: 0/1/2/3 - uint8_t needExitNoCmdMode; // !< Need to exit NoCmd mode before other IP command - uint8_t halfClkForNonReadCmd; // !< Half the Serial Clock for non-read command: true/false - uint8_t needRestoreNoCmdMode; // !< Need to Restore NoCmd mode after IP commmand execution - uint32_t blockSize; // !< Block size - uint32_t reserve2[11]; // !< Reserved for future use -} flexspi_nor_config_t; - -#define FLASH_BUSY_STATUS_POL 0 -#define FLASH_BUSY_STATUS_OFFSET 0 - -#ifdef __cplusplus -extern "C" { -#endif - -#ifdef __cplusplus -} -#endif -#endif /* __SEEED_ARCH_MIX_FLEXSPI_NOR_CONFIG__ */ diff --git a/ports/mimxrt/boards/SEEED_ARCH_MIX/qspi_nor_flash_config.c b/ports/mimxrt/boards/SEEED_ARCH_MIX/qspi_nor_flash_config.c deleted file mode 100644 index 7b2584d3d..000000000 --- a/ports/mimxrt/boards/SEEED_ARCH_MIX/qspi_nor_flash_config.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * Copyright 2019 NXP. - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -// Based on tinyusb/hw/bsp/teensy_40/evkmimxrt1010_flexspi_nor_config.c - -#include BOARD_FLASH_CONFIG_HEADER_H - -/* Component ID definition, used by tools. */ -#ifndef FSL_COMPONENT_ID -#define FSL_COMPONENT_ID "platform.drivers.xip_board" -#endif - -/******************************************************************************* - * Code - ******************************************************************************/ -#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) -#if defined(__ARMCC_VERSION) || defined(__GNUC__) -__attribute__((section(".boot_hdr.conf"))) -#elif defined(__ICCARM__) -#pragma location = ".boot_hdr.conf" -#endif - -const flexspi_nor_config_t qspiflash_config = { - .memConfig = - { - .tag = FLEXSPI_CFG_BLK_TAG, - .version = FLEXSPI_CFG_BLK_VERSION, - .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 3u, - .csSetupTime = 3u, - .busyOffset = FLASH_BUSY_STATUS_OFFSET, // Status bit 0 indicates busy. - .busyBitPolarity = FLASH_BUSY_STATUS_POL, // Busy when the bit is 1. - .deviceModeCfgEnable = 1u, - .deviceModeType = kDeviceConfigCmdType_QuadEnable, - .deviceModeSeq = { - .seqId = 4u, - .seqNum = 1u, - }, - .deviceModeArg = 0x40, - // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock - .deviceType = kFlexSpiDeviceType_SerialNOR, - .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_100MHz, - .sflashA1Size = BOARD_FLASH_SIZE, - .lookupTable = - { - // 0 Read LUTs 0 -> 0 - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - - // 1 Read status register -> 1 - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x01), - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - - // 2 Fast read quad mode - SDR - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x6B, RADDR_SDR, FLEXSPI_1PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x08, READ_SDR, FLEXSPI_4PAD, 0x04), - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - - // 3 Write Enable -> 3 - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0), - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - - // 4 Read extend parameters - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x81, READ_SDR, FLEXSPI_1PAD, 0x04), - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - - // 5 Erase Sector -> 5 - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20, RADDR_SDR, FLEXSPI_1PAD, 24), - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - - // 6 Write Status Reg - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01, WRITE_SDR, FLEXSPI_1PAD, 0x04), - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - - // 7 Page Program - quad mode (-> 9) - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x32, RADDR_SDR, FLEXSPI_1PAD, 0x18), - FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_4PAD, 0x04, STOP, FLEXSPI_1PAD, 0), - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - - // 8 Read ID - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x90, DUMMY_SDR, FLEXSPI_1PAD, 24), - FLEXSPI_LUT_SEQ(READ_SDR, FLEXSPI_1PAD, 0x00, 0, 0, 0), - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - - // 9 Page Program - single mode -> 9 - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 24), - FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0, 0, 0, 0), - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - - // 10 Enter QPI mode - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35, STOP, FLEXSPI_1PAD, 0), - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - - // 11 Erase Chip - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0), - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - - // 12 Exit QPI mode - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_4PAD, 0xF5, STOP, FLEXSPI_1PAD, 0), - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler - }, - }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .blockSize = 256u * 1024u, - .isUniformBlockSize = false, - // .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, -}; -#endif /* XIP_BOOT_HEADER_ENABLE */ |