diff options
29 files changed, 18 insertions, 117 deletions
diff --git a/ports/esp32/boards/ESP32_GENERIC/board.md b/ports/esp32/boards/ESP32_GENERIC/board.md index 9346d18d8..06972e436 100644 --- a/ports/esp32/boards/ESP32_GENERIC/board.md +++ b/ports/esp32/boards/ESP32_GENERIC/board.md @@ -1,5 +1,5 @@ The following files are firmware that should work on most ESP32-based boards -with 4MiB of flash, including WROOM WROVER, SOLO, PICO, and MINI modules. +with 4MiB or more of flash, including WROOM WROVER, SOLO, PICO, and MINI modules. This board has multiple variants available: diff --git a/ports/esp32/boards/ESP32_GENERIC_C3/board.md b/ports/esp32/boards/ESP32_GENERIC_C3/board.md index 1604b879c..6097eb85d 100644 --- a/ports/esp32/boards/ESP32_GENERIC_C3/board.md +++ b/ports/esp32/boards/ESP32_GENERIC_C3/board.md @@ -1,6 +1,6 @@ The following files are firmware images that should work on most -ESP32-C3-based boards with 4MiB of flash, including WROOM and MINI modules, -that use the revision 3 silicon (or newer). +ESP32-C3-based boards with 4MiB or more of flash, including WROOM and MINI +modules, that use the revision 3 silicon (or newer). USB serial/JTAG support is enabled on pin 18 and 19. Note that this is not a full USB stack, the C3 just provides a CDC/ACM class serial diff --git a/ports/esp32/boards/ESP32_GENERIC_S2/board.md b/ports/esp32/boards/ESP32_GENERIC_S2/board.md index 3e46c0246..d065ecbbb 100644 --- a/ports/esp32/boards/ESP32_GENERIC_S2/board.md +++ b/ports/esp32/boards/ESP32_GENERIC_S2/board.md @@ -1,5 +1,5 @@ The following files are firmware that should work on most ESP32-S2-based -boards with 4MiB of flash, including WROOM, WROVER, and MINI modules. +boards with 4MiB or more of flash, including WROOM, WROVER, and MINI modules. This firmware supports configurations with and without SPIRAM (also known as PSRAM) and will auto-detect a connected SPIRAM chip at startup and allocate diff --git a/ports/esp32/boards/ESP32_GENERIC_S3/board.json b/ports/esp32/boards/ESP32_GENERIC_S3/board.json index fd0c9edce..7a546d35f 100644 --- a/ports/esp32/boards/ESP32_GENERIC_S3/board.json +++ b/ports/esp32/boards/ESP32_GENERIC_S3/board.json @@ -21,7 +21,6 @@ "url": "https://www.espressif.com/en/products/modules", "vendor": "Espressif", "variants": { - "SPIRAM_OCT": "Support for Octal-SPIRAM", - "FLASH_4M": "4MiB flash" + "SPIRAM_OCT": "Support for Octal-SPIRAM" } } diff --git a/ports/esp32/boards/ESP32_GENERIC_S3/board.md b/ports/esp32/boards/ESP32_GENERIC_S3/board.md index 16930c919..68ce0917e 100644 --- a/ports/esp32/boards/ESP32_GENERIC_S3/board.md +++ b/ports/esp32/boards/ESP32_GENERIC_S3/board.md @@ -1,9 +1,7 @@ The following files are firmware that should work on most ESP32-S3-based -boards with 4/8MiB of flash, including WROOM and MINI modules. +boards with 4MiB or more of flash, including WROOM and MINI modules. This firmware supports configurations with and without SPIRAM (also known as PSRAM) and will auto-detect a connected SPIRAM chip at startup and allocate the MicroPython heap accordingly. However if your board has Octal SPIRAM, then use the "spiram-oct" variant. - -If your board has 4MiB flash (including ESP32-S3FH4R2 based ones with embedded flash), then use the "flash-4m" build. diff --git a/ports/esp32/boards/ESP32_GENERIC_S3/mpconfigvariant_FLASH_4M.cmake b/ports/esp32/boards/ESP32_GENERIC_S3/mpconfigvariant_FLASH_4M.cmake deleted file mode 100644 index e832cdb60..000000000 --- a/ports/esp32/boards/ESP32_GENERIC_S3/mpconfigvariant_FLASH_4M.cmake +++ /dev/null @@ -1,4 +0,0 @@ -set(SDKCONFIG_DEFAULTS - ${SDKCONFIG_DEFAULTS} - boards/ESP32_GENERIC_S3/sdkconfig.flash_4m -) diff --git a/ports/esp32/boards/ESP32_GENERIC_S3/sdkconfig.board b/ports/esp32/boards/ESP32_GENERIC_S3/sdkconfig.board index 9839b0d30..369330682 100644 --- a/ports/esp32/boards/ESP32_GENERIC_S3/sdkconfig.board +++ b/ports/esp32/boards/ESP32_GENERIC_S3/sdkconfig.board @@ -1,8 +1,2 @@ CONFIG_ESPTOOLPY_FLASHMODE_QIO=y CONFIG_ESPTOOLPY_FLASHFREQ_80M=y - -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y -CONFIG_ESPTOOLPY_FLASHSIZE_16MB= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MiB.csv" diff --git a/ports/esp32/boards/ESP32_GENERIC_S3/sdkconfig.flash_4m b/ports/esp32/boards/ESP32_GENERIC_S3/sdkconfig.flash_4m deleted file mode 100644 index c967c46ae..000000000 --- a/ports/esp32/boards/ESP32_GENERIC_S3/sdkconfig.flash_4m +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y -CONFIG_ESPTOOLPY_FLASHSIZE_8MB= - -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-4MiB.csv" diff --git a/ports/esp32/boards/SIL_WESP32/sdkconfig.board b/ports/esp32/boards/SIL_WESP32/sdkconfig.board index 741a4db43..36155cd5e 100644 --- a/ports/esp32/boards/SIL_WESP32/sdkconfig.board +++ b/ports/esp32/boards/SIL_WESP32/sdkconfig.board @@ -1,9 +1,6 @@ -# 16 MB flash +# 8 MB+ flash -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB= -CONFIG_ESPTOOLPY_FLASHSIZE_16MB=y -CONFIG_ESPTOOLPY_FLASHSIZE="16MB" +CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y # Fast flash @@ -14,7 +11,7 @@ CONFIG_ESP32_REV_MIN_1=y # OTA CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-16MiB-ota.csv" +CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MiBplus-ota.csv" # Network name diff --git a/ports/esp32/boards/UM_FEATHERS2/sdkconfig.board b/ports/esp32/boards/UM_FEATHERS2/sdkconfig.board index 9ab58f215..162de0da1 100644 --- a/ports/esp32/boards/UM_FEATHERS2/sdkconfig.board +++ b/ports/esp32/boards/UM_FEATHERS2/sdkconfig.board @@ -3,11 +3,6 @@ CONFIG_ESPTOOLPY_FLASHFREQ_80M=y CONFIG_SPIRAM_MEMTEST= -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_16MB=y -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-16MiB.csv" - # LWIP CONFIG_LWIP_LOCAL_HOSTNAME="UMFeatherS2" # end of LWIP diff --git a/ports/esp32/boards/UM_FEATHERS3/sdkconfig.board b/ports/esp32/boards/UM_FEATHERS3/sdkconfig.board index 3ca0c4b24..3092e3559 100644 --- a/ports/esp32/boards/UM_FEATHERS3/sdkconfig.board +++ b/ports/esp32/boards/UM_FEATHERS3/sdkconfig.board @@ -1,12 +1,7 @@ CONFIG_ESPTOOLPY_FLASHMODE_QIO=y CONFIG_ESPTOOLPY_FLASHFREQ_80M=y -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB= -CONFIG_ESPTOOLPY_FLASHSIZE_16MB=y CONFIG_SPIRAM_MEMTEST= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-16MiB.csv" CONFIG_LWIP_LOCAL_HOSTNAME="UMFeatherS3" diff --git a/ports/esp32/boards/UM_FEATHERS3NEO/sdkconfig.board b/ports/esp32/boards/UM_FEATHERS3NEO/sdkconfig.board index d0355a94d..25b8d7689 100644 --- a/ports/esp32/boards/UM_FEATHERS3NEO/sdkconfig.board +++ b/ports/esp32/boards/UM_FEATHERS3NEO/sdkconfig.board @@ -3,11 +3,6 @@ CONFIG_ESPTOOLPY_FLASHFREQ_80M=y CONFIG_ESPTOOLPY_AFTER_NORESET=y CONFIG_SPIRAM_MEMTEST= -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y -CONFIG_ESPTOOLPY_FLASHSIZE_16MB= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MiB.csv" CONFIG_LWIP_LOCAL_HOSTNAME="UMFeatherS3Neo" diff --git a/ports/esp32/boards/UM_NANOS3/sdkconfig.board b/ports/esp32/boards/UM_NANOS3/sdkconfig.board index 2a39c6433..e06f7a424 100644 --- a/ports/esp32/boards/UM_NANOS3/sdkconfig.board +++ b/ports/esp32/boards/UM_NANOS3/sdkconfig.board @@ -1,12 +1,7 @@ CONFIG_ESPTOOLPY_FLASHMODE_QIO=y CONFIG_ESPTOOLPY_FLASHFREQ_80M=y -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y -CONFIG_ESPTOOLPY_FLASHSIZE_16MB= CONFIG_SPIRAM_MEMTEST= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MiB.csv" CONFIG_LWIP_LOCAL_HOSTNAME="UMNanoS3" diff --git a/ports/esp32/boards/UM_OMGS3/sdkconfig.board b/ports/esp32/boards/UM_OMGS3/sdkconfig.board index 84a8ce449..8a0bf0b13 100644 --- a/ports/esp32/boards/UM_OMGS3/sdkconfig.board +++ b/ports/esp32/boards/UM_OMGS3/sdkconfig.board @@ -2,12 +2,7 @@ CONFIG_ESPTOOLPY_FLASHMODE_QIO=y CONFIG_ESPTOOLPY_FLASHFREQ_80M=y CONFIG_ESPTOOLPY_AFTER_NORESET=y -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y -CONFIG_ESPTOOLPY_FLASHSIZE_16MB= CONFIG_SPIRAM_MEMTEST= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MiB.csv" CONFIG_LWIP_LOCAL_HOSTNAME="UMOMGS3" diff --git a/ports/esp32/boards/UM_PROS3/sdkconfig.board b/ports/esp32/boards/UM_PROS3/sdkconfig.board index 5752e03e6..75ca58d80 100644 --- a/ports/esp32/boards/UM_PROS3/sdkconfig.board +++ b/ports/esp32/boards/UM_PROS3/sdkconfig.board @@ -1,12 +1,7 @@ CONFIG_ESPTOOLPY_FLASHMODE_QIO=y CONFIG_ESPTOOLPY_FLASHFREQ_80M=y -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB= -CONFIG_ESPTOOLPY_FLASHSIZE_16MB=y CONFIG_SPIRAM_MEMTEST= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-16MiB.csv" CONFIG_LWIP_LOCAL_HOSTNAME="UMProS3" diff --git a/ports/esp32/boards/UM_RGBTOUCH_MINI/sdkconfig.board b/ports/esp32/boards/UM_RGBTOUCH_MINI/sdkconfig.board index ef3f38af4..7d244fdc1 100644 --- a/ports/esp32/boards/UM_RGBTOUCH_MINI/sdkconfig.board +++ b/ports/esp32/boards/UM_RGBTOUCH_MINI/sdkconfig.board @@ -2,12 +2,7 @@ CONFIG_ESPTOOLPY_FLASHMODE_QIO=y CONFIG_ESPTOOLPY_FLASHFREQ_80M=y CONFIG_ESPTOOLPY_AFTER_NORESET=y -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y -CONFIG_ESPTOOLPY_FLASHSIZE_16MB= CONFIG_SPIRAM_MEMTEST= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MiB.csv" CONFIG_LWIP_LOCAL_HOSTNAME="UMRGBTouchMini" diff --git a/ports/esp32/boards/UM_TINYC6/sdkconfig.board b/ports/esp32/boards/UM_TINYC6/sdkconfig.board index 7917467b1..213d28d8b 100644 --- a/ports/esp32/boards/UM_TINYC6/sdkconfig.board +++ b/ports/esp32/boards/UM_TINYC6/sdkconfig.board @@ -2,9 +2,4 @@ CONFIG_ESPTOOLPY_FLASHMODE_QIO=y CONFIG_ESPTOOLPY_FLASHFREQ_80M=y CONFIG_ESPTOOLPY_AFTER_NORESET=y -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y -CONFIG_ESPTOOLPY_FLASHSIZE_16MB= CONFIG_SPIRAM_MEMTEST= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MiB.csv" diff --git a/ports/esp32/boards/UM_TINYS3/sdkconfig.board b/ports/esp32/boards/UM_TINYS3/sdkconfig.board index d1d19761a..2474c5fb2 100644 --- a/ports/esp32/boards/UM_TINYS3/sdkconfig.board +++ b/ports/esp32/boards/UM_TINYS3/sdkconfig.board @@ -1,12 +1,7 @@ CONFIG_ESPTOOLPY_FLASHMODE_QIO=y CONFIG_ESPTOOLPY_FLASHFREQ_80M=y -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y -CONFIG_ESPTOOLPY_FLASHSIZE_16MB= CONFIG_SPIRAM_MEMTEST= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MiB.csv" CONFIG_LWIP_LOCAL_HOSTNAME="UMTinyS3" diff --git a/ports/esp32/boards/UM_TINYWATCHS3/sdkconfig.board b/ports/esp32/boards/UM_TINYWATCHS3/sdkconfig.board index 1380e15ce..10121d235 100644 --- a/ports/esp32/boards/UM_TINYWATCHS3/sdkconfig.board +++ b/ports/esp32/boards/UM_TINYWATCHS3/sdkconfig.board @@ -1,12 +1,7 @@ CONFIG_ESPTOOLPY_FLASHMODE_QIO=y CONFIG_ESPTOOLPY_FLASHFREQ_80M=y -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y -CONFIG_ESPTOOLPY_FLASHSIZE_16MB= CONFIG_SPIRAM_MEMTEST= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MiB.csv" CONFIG_LWIP_LOCAL_HOSTNAME="UMTinyWATCHS3" diff --git a/ports/esp32/boards/sdkconfig.base b/ports/esp32/boards/sdkconfig.base index 823b916d9..30740af43 100644 --- a/ports/esp32/boards/sdkconfig.base +++ b/ports/esp32/boards/sdkconfig.base @@ -97,7 +97,7 @@ CONFIG_ULP_COPROC_RESERVE_MEM=2040 # For cmake build CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-4MiB.csv" +CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-4MiBplus.csv" # To reduce iRAM usage CONFIG_ESP32_WIFI_IRAM_OPT=n diff --git a/ports/esp32/partitions-16MiB-ota.csv b/ports/esp32/partitions-16MiB-ota.csv deleted file mode 100644 index a6f83bc46..000000000 --- a/ports/esp32/partitions-16MiB-ota.csv +++ /dev/null @@ -1,10 +0,0 @@ -# Partition table for MicroPython with OTA support using 16MB flash -# Notes: the offset of the partition table itself is set in -# $IDF_PATH/components/partition_table/Kconfig.projbuild. -# Name, Type, SubType, Offset, Size, Flags -nvs, data, nvs, 0x9000, 0x4000, -otadata, data, ota, 0xd000, 0x2000, -phy_init, data, phy, 0xf000, 0x1000, -ota_0, app, ota_0, 0x10000, 0x270000, -ota_1, app, ota_1, 0x280000, 0x270000, -vfs, data, fat, 0x4f0000, 0xb10000, diff --git a/ports/esp32/partitions-16MiB.csv b/ports/esp32/partitions-16MiB.csv deleted file mode 100644 index ae926c7b9..000000000 --- a/ports/esp32/partitions-16MiB.csv +++ /dev/null @@ -1,7 +0,0 @@ -# Notes: the offset of the partition table itself is set in -# $IDF_PATH/components/partition_table/Kconfig.projbuild. -# Name, Type, SubType, Offset, Size, Flags -nvs, data, nvs, 0x9000, 0x6000, -phy_init, data, phy, 0xf000, 0x1000, -factory, app, factory, 0x10000, 0x1F0000, -vfs, data, fat, 0x200000, 0xE00000, diff --git a/ports/esp32/partitions-2MiB.csv b/ports/esp32/partitions-2MiB.csv index ea6626825..5449201a7 100644 --- a/ports/esp32/partitions-2MiB.csv +++ b/ports/esp32/partitions-2MiB.csv @@ -4,4 +4,3 @@ nvs, data, nvs, 0x9000, 0x6000, phy_init, data, phy, 0xf000, 0x1000, factory, app, factory, 0x10000, 0x160000, -vfs, data, fat, 0x170000, 0x50000, diff --git a/ports/esp32/partitions-32MiB.csv b/ports/esp32/partitions-32MiB.csv deleted file mode 100644 index 31591c994..000000000 --- a/ports/esp32/partitions-32MiB.csv +++ /dev/null @@ -1,7 +0,0 @@ -# Notes: the offset of the partition table itself is set in -# $IDF_PATH/components/partition_table/Kconfig.projbuild. -# Name, Type, SubType, Offset, Size, Flags -nvs, data, nvs, 0x9000, 0x6000, -phy_init, data, phy, 0xf000, 0x1000, -factory, app, factory, 0x10000, 0x1F0000, -vfs, data, fat, 0x200000, 0x1E00000, diff --git a/ports/esp32/partitions-4MiB-ota.csv b/ports/esp32/partitions-4MiB-ota.csv index 094ad7666..9cbb42279 100644 --- a/ports/esp32/partitions-4MiB-ota.csv +++ b/ports/esp32/partitions-4MiB-ota.csv @@ -7,4 +7,3 @@ otadata, data, ota, 0xd000, 0x2000, phy_init, data, phy, 0xf000, 0x1000, ota_0, app, ota_0, 0x10000, 0x180000, ota_1, app, ota_1, 0x190000, 0x180000, -vfs, data, fat, 0x310000, 0x0f0000, diff --git a/ports/esp32/partitions-4MiB-romfs.csv b/ports/esp32/partitions-4MiB-romfs.csv index dd02506e5..29033ff3a 100644 --- a/ports/esp32/partitions-4MiB-romfs.csv +++ b/ports/esp32/partitions-4MiB-romfs.csv @@ -5,4 +5,3 @@ nvs, data, nvs, 0x9000, 0x6000, phy_init, data, phy, 0xf000, 0x1000, factory, app, factory, 0x10000, 0x1D0000, romfs, data, 0x8f, 0x1E0000, 0x20000, -vfs, data, fat, 0x200000, 0x200000, diff --git a/ports/esp32/partitions-4MiB.csv b/ports/esp32/partitions-4MiBplus.csv index 53f0f1674..460e5cc0e 100644 --- a/ports/esp32/partitions-4MiB.csv +++ b/ports/esp32/partitions-4MiBplus.csv @@ -1,7 +1,10 @@ +# This partition table is for devices with 4MiB or more of flash. +# The first 2MiB is used for bootloader, nvs, phy_init and firmware. +# The remaining flash is for the user filesystem(s). + # Notes: the offset of the partition table itself is set in # $IDF_PATH/components/partition_table/Kconfig.projbuild. # Name, Type, SubType, Offset, Size, Flags nvs, data, nvs, 0x9000, 0x6000, phy_init, data, phy, 0xf000, 0x1000, factory, app, factory, 0x10000, 0x1F0000, -vfs, data, fat, 0x200000, 0x200000, diff --git a/ports/esp32/partitions-8MiB.csv b/ports/esp32/partitions-8MiB.csv deleted file mode 100644 index 582d3b50e..000000000 --- a/ports/esp32/partitions-8MiB.csv +++ /dev/null @@ -1,7 +0,0 @@ -# Notes: the offset of the partition table itself is set in -# $IDF_PATH/components/partition_table/Kconfig.projbuild. -# Name, Type, SubType, Offset, Size, Flags -nvs, data, nvs, 0x9000, 0x6000, -phy_init, data, phy, 0xf000, 0x1000, -factory, app, factory, 0x10000, 0x1F0000, -vfs, data, fat, 0x200000, 0x600000, diff --git a/ports/esp32/partitions-32MiB-ota.csv b/ports/esp32/partitions-8MiBplus-ota.csv index 7366a2ad8..09a8e6d70 100644 --- a/ports/esp32/partitions-32MiB-ota.csv +++ b/ports/esp32/partitions-8MiBplus-ota.csv @@ -1,4 +1,7 @@ -# Partition table for MicroPython with OTA support using 32MB flash +# This partition table is for devices with 8MiB or more of flash and OTA support. +# The first 5056kiB is used for bootloader, nvs, phy_init and firmware. +# The remaining flash is for the user filesystem(s). + # Notes: the offset of the partition table itself is set in # $IDF_PATH/components/partition_table/Kconfig.projbuild. # Name, Type, SubType, Offset, Size, Flags @@ -7,4 +10,3 @@ otadata, data, ota, 0xd000, 0x2000, phy_init, data, phy, 0xf000, 0x1000, ota_0, app, ota_0, 0x10000, 0x270000, ota_1, app, ota_1, 0x280000, 0x270000, -vfs, data, fat, 0x4f0000, 0x1B10000, |