diff options
| -rw-r--r-- | docs/samd/pinout.rst | 96 |
1 files changed, 51 insertions, 45 deletions
diff --git a/docs/samd/pinout.rst b/docs/samd/pinout.rst index 7e8d7ad90..46d9d7a29 100644 --- a/docs/samd/pinout.rst +++ b/docs/samd/pinout.rst @@ -70,17 +70,17 @@ SAMD21 UART assignments ``````````````````````` The UART devices and signals must be chosen according to the following rules: -- The TX signal must be at a Pin with pad numbers 2 or 0, like Pin 1 with serial +- The TX signal must be at a Pin with pad numbers 2 or 0, like Pin D1 with serial device 0 or 2. - The RX pin may be assigned to one of the other pads. Examples for Adafruit ItsyBitsy M0 Express: -- uart 0 at pins 0/1 This is the default UART at the RX/TX labelled pins -- uart 1 at pins 12/10 -- uart 2 at pins 0/1 -- uart 3 at pins 11/13 -- uart 4 at pins 2/5 +- uart 0 at pins D0/D1 This is the default UART at the RX/TX labelled pins +- uart 1 at pins D12/D10 +- uart 2 at pins D0/D1 +- uart 3 at pins D11/D13 +- uart 4 at pins D2/D5 - uart 5 at pins SCL/SDA or other combinations. @@ -95,8 +95,8 @@ The I2C devices and signals must be chosen according to the following rules: Examples for Adafruit ItsyBitsy M0 Express: - I2C 0 at Pin A3/A4 -- I2C 1 at pins 11/13 -- I2C 2 at the pins 4/3 +- I2C 1 at pins D11/D13 +- I2C 2 at the pins D4/D3 - I2C 3 at the pins SDA/SCL This is the default I2C device at the SDA/SCl labelled pin - I2C 4 at the pins A1/A2 - I2C 5 at the pins SDA/SCL, @@ -112,10 +112,10 @@ The I2C devices and signals must be chosen according to the following rules: Examples for Adafruit ItsyBitsy M0 Express: -- SPI 0 at pins 0/4/1 -- SPI 1 at pins 11/12/13 -- SPI 2 at pins 0/4/1 -- SPI 3 at pins 11/12/13 +- SPI 0 at pins D0/D4/D1 +- SPI 1 at pins D11/D12/D13 +- SPI 2 at pins D0/D4/D1 +- SPI 3 at pins D11/D12/D13 - SPI 4 at Pin MOSI/MISO/SCK This is the default SPI device at the MOSI/MISO/SCK labelled pins. or other combinations. @@ -201,16 +201,16 @@ SAMD51 UART assignments ``````````````````````` The UART devices and signals must be chosen according to the following rules: -- The TX signal must be at a Pin with pad numbers 0, like Pin 1 with serial +- The TX signal must be at a Pin with pad numbers 0, like Pin D1 with serial device 3. - The RX pin may be assigned to one of the other pads. Examples for Adafruit ItsyBitsy 4 Express: - uart 0 at pins A4/A1 -- uart 1 at pins 1/0 This is the default UART at the RX/TX labelled pins +- uart 1 at pins D1/D0 This is the default UART at the RX/TX labelled pins - uart 2 at pins SCL/SDA This is the default I2C device at the SDA/SCl labelled pin -- uart 3 at pins 0/1 +- uart 3 at pins D0/D1 - uart 4 at pins SDA/SCL - uart 5 at pins D12/D13 @@ -226,11 +226,11 @@ The I2C devices and signals must be chosen according to the following rules: Examples for Adafruit ItsyBitsy M0 Express: - I2C 0 at pins A3/A4 -- I2C 1 at pins 0/1 +- I2C 1 at pins D0/D1 - I2C 2 at the pins SDA/SCL -- I2C 3 at the pins 1/0 +- I2C 3 at the pins D1/D0 - I2C 4 at the pins A2/A3 -- I2C 5 at the pins 12/13 +- I2C 5 at the pins D12/D13 or other combinations. @@ -244,8 +244,8 @@ The SPI devices and signals must be chosen according to the following rules: Examples for Adafruit ItsyBitsy M0 Express: - SPI 1 at Pin MOSI/MISO/SCK This is the default SPI device at the MOSI/MISO/SCK labelled pins. -- SPI 3 at pins 13/11/12 -- SPI 5 at pins 12/3/13 +- SPI 3 at pins D13/D11/D12 +- SPI 5 at pins D12/D3/D13 or other combinations. @@ -325,10 +325,10 @@ Adafruit ItsyBitsy M4 Express :ref:`samd51_pinout_table`. The default devices at the board are: -- UART 5 at pins 0/1, labelled RX/TX -- I2C 2 at pins 21/20, labelled SDA/SCL -- SPI 1 at pins 22/23/24, labelled MOSI, MISO and SCK -- DAC output on pins 14 and 15, labelled A0 and A1 +- UART 5 at pins D0/D1, labelled RX/TX +- I2C 2 at pins PA12/PA13, labelled SDA/SCL +- SPI 1 at pins PA23/PA22/PA17, labelled MOSI, MISO and SCK +- DAC output on pins PA02 and PA05, labelled A0 and A1 SEEED XIAO pin assignment table ------------------------------- @@ -381,10 +381,10 @@ Adafruit ItsyBitsy M0 Express :ref:`samd21_pinout_table`. The default devices at the board are: -- UART 4 at pins 7/6, labelled A6_D6/A7_D7 -- I2C 2 at pins 4/5, labelled A4_D4/A5_D5 -- SPI 0 at pins 10/9/8, labelled A10_D10, A9_D9 and A8_D8 -- DAC output on pin 0, labelled A0_D0 +- UART 4 at pins PB08/PB09, labelled A6_D6/A7_D7 +- I2C 2 at pins PA08/PA09, labelled A4_D4/A5_D5 +- SPI 0 at pins PA06/PA05/PA07, labelled A10_D10, A9_D9 and A8_D8 +- DAC output on pin PA02, labelled A0_D0 Adafruit Feather M0 Express pin assignment table ------------------------------------------------ @@ -437,10 +437,10 @@ Adafruit ItsyBitsy M0 Express :ref:`samd21_pinout_table`. The default devices at the board are: -- UART 5 at pins 21/20, labelled RX/TX -- I2C 3 at pins 22/23, labelled SDA/SCL -- SPI 4 at pins 24/25/26, labelled MOSI, MISO and SCK -- DAC output on pin 14, labelled A0 +- UART 5 at pins PB23/PB22, labelled RX/TX +- I2C 3 at pins PA22/PA23, labelled SDA/SCL +- SPI 4 at pins PA10/PA12/PA11, labelled MOSI, MISO and SCK +- DAC output on pin PA02, labelled A0 Adafruit Trinket M0 pin assignment table ------------------------------------------------ @@ -481,10 +481,10 @@ Adafruit ItsyBitsy M0 Express :ref:`samd21_pinout_table`. The default devices at the board are: -- UART 0 at pins 3/4, labelled D3/D4 -- I2C 2 at pins 0/2, labelled D0/D2 -- SPI 0 at pins 4/2/3, labelled D4, D2 and D0 -- DAC output on pin 1, labelled D1 +- UART 0 at pins PA07/PA06, labelled D3/D4 +- I2C 2 at pins PA08/PA09, labelled D0/D2 +- SPI 0 at pins PA06/PA09/PA08, labelled D4, D2 and D0 +- DAC output on pin PA02, labelled D1 SAMD21 Xplained PRO pin assignment table ---------------------------------------- @@ -550,7 +550,7 @@ For the definition of the table columns see the explanation at the table for Adafruit ItsyBitsy M0 Express :ref:`samd21_pinout_table`. There are no pins labelled for default devices on this board. DAC output -is on pin 32, labelled EXT3_PIN3 +is on pin PA02, labelled EXT3_PIN3 Minisam M4 pin assignment table ------------------------------- @@ -602,10 +602,10 @@ Adafruit ItsyBitsy M4 Express :ref:`samd51_pinout_table`. The default devices at the board are: -- UART 1 at pins 6/7, labelled D0/D1 -- I2C 2 at pins 14/15, labelled SDA/SCL -- SPI 1 at pins 16/17/18, labelled MOSI, MISO and SCK -- DAC output on pins 0 and 4, labelled A0_D9 and A4_D13 +- UART 1 at pins PA16/PA17, labelled D0/D1 +- I2C 2 at pins PA12/PA13, labelled SDA/SCL +- SPI 1 at pins PB22/PB23/PA01, labelled MOSI, MISO and SCK +- DAC output on pins PA02 and PA05, labelled A0_D9 and A4_D13 Seeed WIO Terminal pin assignment table --------------------------------------- @@ -717,6 +717,12 @@ Pin GPIO Pin name IRQ ADC ADC Serial Serial TC PWM PWM For the definition of the table columns see the explanation at the table for Adafruit ItsyBitsy M4 Express :ref:`samd51_pinout_table`. +Default pin assignments: +- UART 2 at pins PB27 and PB26, labelled RX and TX +- I2C 4 at pins PA12 and PA13, labelled SCL0 and SDA0 +- I2C 3 at pins PA16 and PA17, labelled SCL1 and SDA1 +- SPI 5 at pins PB00, PB02 and PB03, labelle MISO, MOSI and SCK + There seems to be no default pin assignment for this board. Sparkfun SAMD51 Thing Plus pin assignment table @@ -783,10 +789,10 @@ Adafruit ItsyBitsy M4 Express :ref:`samd51_pinout_table`. The default devices at the board are: -- UART 1 at pins 2/3, labelled RXD/TXD -- I2C 5 at pins 20/21, labelled SDA/SCL -- SPI 4 at pins 22/23/24, labelled MOSI, MISO and SCK -- DAC output on pins 14 and 18, labelled A0 and A4 +- UART 1 at pins PB23/PB22, labelled RXD/TXD +- I2C 5 at pins PA22/PA23, labelled SDA/SCL +- SPI 4 at pins PB12/PB11/PB13, labelled MOSI, MISO and SCK +- DAC output on pins PA02 and PA05, labelled A0 and A4 Scripts for creating the pin assignment tables ---------------------------------------------- |