diff options
| -rw-r--r-- | ports/stm32/gccollect.c | 21 | ||||
| -rw-r--r-- | ports/stm32/led.c | 1 | ||||
| -rw-r--r-- | ports/stm32/rtc.c | 5 | ||||
| -rw-r--r-- | ports/stm32/storage.c | 5 | ||||
| -rw-r--r-- | ports/stm32/usbdev/class/src/usbd_cdc_msc_hid.c | 17 | ||||
| -rw-r--r-- | ports/stm32/usbdev/class/src/usbd_msc_scsi.c | 6 |
6 files changed, 0 insertions, 55 deletions
diff --git a/ports/stm32/gccollect.c b/ports/stm32/gccollect.c index 667bbc432..083642bce 100644 --- a/ports/stm32/gccollect.c +++ b/ports/stm32/gccollect.c @@ -24,23 +24,13 @@ * THE SOFTWARE. */ -#include <stdio.h> -#include <stdint.h> - -#include "py/mpstate.h" #include "py/gc.h" #include "py/mpthread.h" #include "shared/runtime/gchelper.h" #include "shared/runtime/softtimer.h" #include "gccollect.h" -#include "systick.h" void gc_collect(void) { - // get current time, in case we want to time the GC - #if 0 - uint32_t start = mp_hal_ticks_us(); - #endif - // start the GC gc_collect_start(); @@ -57,15 +47,4 @@ void gc_collect(void) { // end the GC gc_collect_end(); - - #if 0 - // print GC info - uint32_t ticks = mp_hal_ticks_us() - start; - gc_info_t info; - gc_info(&info); - printf("GC@%lu %lums\n", start, ticks); - printf(" " UINT_FMT " total\n", info.total); - printf(" " UINT_FMT " : " UINT_FMT "\n", info.used, info.free); - printf(" 1=" UINT_FMT " 2=" UINT_FMT " m=" UINT_FMT "\n", info.num_1block, info.num_2block, info.max_block); - #endif } diff --git a/ports/stm32/led.c b/ports/stm32/led.c index fa211f1e1..e70c22532 100644 --- a/ports/stm32/led.c +++ b/ports/stm32/led.c @@ -212,7 +212,6 @@ void led_state(pyb_led_t led, int state) { } const pin_obj_t *led_pin = pyb_led_obj[led - 1].led_pin; - // printf("led_state(%d,%d)\n", led, state); if (state == 0) { // turn LED off MICROPY_HW_LED_OFF(led_pin); diff --git a/ports/stm32/rtc.c b/ports/stm32/rtc.c index 874e427cf..92f64626a 100644 --- a/ports/stm32/rtc.c +++ b/ports/stm32/rtc.c @@ -24,8 +24,6 @@ * THE SOFTWARE. */ -#include <stdio.h> - #include "py/runtime.h" #include "shared/timeutils/timeutils.h" #include "extint.h" @@ -771,8 +769,6 @@ mp_obj_t pyb_rtc_wakeup(size_t n_args, const mp_obj_t *args) { NVIC_SetPriority(RTC_WKUP_IRQn, IRQ_PRI_RTC_WKUP); HAL_NVIC_EnableIRQ(RTC_WKUP_IRQn); - - // printf("wut=%d wucksel=%d\n", wut, wucksel); } else { // clear WUTIE to disable interrupts RTC->CR &= ~RTC_CR_WUTIE; @@ -833,7 +829,6 @@ mp_obj_t pyb_rtc_calibration(size_t n_args, const mp_obj_t *args) { HAL_RTCEx_SetSmoothCalib(&RTCHandle, RTC_SMOOTHCALIB_PERIOD_32SEC, cal_p, cal_m); return mp_const_none; } else { - // printf("CALR = 0x%x\n", (mp_uint_t) RTCHandle.Instance->CALR); // DEBUG // Test if CALP bit is set in CALR: if (RTCHandle.Instance->CALR & 0x8000) { cal = 512 - (RTCHandle.Instance->CALR & 0x1ff); diff --git a/ports/stm32/storage.c b/ports/stm32/storage.c index 848602a78..462322580 100644 --- a/ports/stm32/storage.c +++ b/ports/stm32/storage.c @@ -24,9 +24,6 @@ * THE SOFTWARE. */ -#include <stdint.h> -#include <string.h> - #include "py/runtime.h" #include "py/mperrno.h" #include "extmod/vfs_fat.h" @@ -144,7 +141,6 @@ static void build_partition(uint8_t *buf, int boot, int type, uint32_t start_blo } bool storage_read_block(uint8_t *dest, uint32_t block) { - // printf("RD %u\n", block); if (block == 0) { // fake the MBR so we can decide on our own partition table @@ -176,7 +172,6 @@ bool storage_read_block(uint8_t *dest, uint32_t block) { } bool storage_write_block(const uint8_t *src, uint32_t block) { - // printf("WR %u\n", block); if (block == 0) { // can't write MBR, but pretend we did return true; diff --git a/ports/stm32/usbdev/class/src/usbd_cdc_msc_hid.c b/ports/stm32/usbdev/class/src/usbd_cdc_msc_hid.c index 3708c7558..c32c20ab5 100644 --- a/ports/stm32/usbdev/class/src/usbd_cdc_msc_hid.c +++ b/ports/stm32/usbdev/class/src/usbd_cdc_msc_hid.c @@ -821,23 +821,6 @@ static uint8_t USBD_CDC_MSC_HID_DeInit(USBD_HandleTypeDef *pdev, uint8_t cfgidx) } static uint8_t USBD_CDC_MSC_HID_Setup(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) { - - /* - printf("SU: %x %x %x %x\n", req->bmRequest, req->bRequest, req->wValue, req->wIndex); - - This is what we get when MSC is IFACE=0 and CDC is IFACE=1,2: - SU: 21 22 0 1 -- USB_REQ_TYPE_CLASS | USB_REQ_RECIPIENT_INTERFACE; CDC_SET_CONTROL_LINE_STATE - SU: 21 20 0 1 -- USB_REQ_TYPE_CLASS | USB_REQ_RECIPIENT_INTERFACE; CDC_SET_LINE_CODING - SU: a1 fe 0 0 -- 0x80 | USB_REQ_TYPE_CLASS | USB_REQ_RECIPIENT_INTERFACE; BOT_GET_MAX_LUN; 0; 0 - SU: 21 22 3 1 -- USB_REQ_TYPE_CLASS | USB_REQ_RECIPIENT_INTERFACE; CDC_SET_CONTROL_LINE_STATE - - On a Mac OS X, with MSC then CDC: - SU: a1 fe 0 0 - SU: 21 22 2 1 - SU: 21 22 3 1 - SU: 21 20 0 1 - */ - usbd_cdc_msc_hid_state_t *usbd = pdev->pClassData; // Work out the recipient of the setup request diff --git a/ports/stm32/usbdev/class/src/usbd_msc_scsi.c b/ports/stm32/usbdev/class/src/usbd_msc_scsi.c index 2eb716ccd..78c8c5af1 100644 --- a/ports/stm32/usbdev/class/src/usbd_msc_scsi.c +++ b/ports/stm32/usbdev/class/src/usbd_msc_scsi.c @@ -123,12 +123,6 @@ int8_t SCSI_ProcessCmd(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params) { - /* - if (params[0] != SCSI_READ10 && params[0] != SCSI_WRITE10) { - printf("SCSI_ProcessCmd(lun=%d, params=%x, %x)\n", lun, params[0], params[1]); - } - */ - switch (params[0]) { case SCSI_TEST_UNIT_READY: |