diff options
| -rw-r--r-- | ports/stm32/boards/STM32L476DISC/bdev.c | 22 | ||||
| -rw-r--r-- | ports/stm32/boards/STM32L476DISC/mpconfigboard.h | 12 |
2 files changed, 34 insertions, 0 deletions
diff --git a/ports/stm32/boards/STM32L476DISC/bdev.c b/ports/stm32/boards/STM32L476DISC/bdev.c new file mode 100644 index 000000000..50a02498a --- /dev/null +++ b/ports/stm32/boards/STM32L476DISC/bdev.c @@ -0,0 +1,22 @@ +#include "storage.h" +#include "genhdr/pins.h" + +// External SPI flash uses standard SPI interface + +const mp_soft_spi_obj_t soft_spi_bus = { + .delay_half = MICROPY_HW_SOFTSPI_MIN_DELAY, + .polarity = 0, + .phase = 0, + .sck = &MICROPY_HW_SPIFLASH_SCK, + .mosi = &MICROPY_HW_SPIFLASH_MOSI, + .miso = &MICROPY_HW_SPIFLASH_MISO, +}; + +const mp_spiflash_config_t spiflash_config = { + .bus_kind = MP_SPIFLASH_BUS_SPI, + .bus.u_spi.cs = &MICROPY_HW_SPIFLASH_CS, + .bus.u_spi.data = (void*)&soft_spi_bus, + .bus.u_spi.proto = &mp_soft_spi_proto, +}; + +spi_bdev_t spi_bdev; diff --git a/ports/stm32/boards/STM32L476DISC/mpconfigboard.h b/ports/stm32/boards/STM32L476DISC/mpconfigboard.h index 463ec9ccf..47d25f574 100644 --- a/ports/stm32/boards/STM32L476DISC/mpconfigboard.h +++ b/ports/stm32/boards/STM32L476DISC/mpconfigboard.h @@ -4,6 +4,7 @@ void STM32L476DISC_board_early_init(void); #define MICROPY_HW_BOARD_NAME "L476-DISCO" #define MICROPY_HW_MCU_NAME "STM32L476" +#define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (0) #define MICROPY_HW_HAS_SWITCH (1) #define MICROPY_HW_HAS_FLASH (1) #define MICROPY_HW_ENABLE_RNG (1) @@ -17,6 +18,17 @@ void STM32L476DISC_board_early_init(void); #define MICROPY_HW_SPIFLASH_MOSI (pin_E12) #define MICROPY_HW_SPIFLASH_MISO (pin_E13) +// block device config for SPI flash +extern const struct _mp_spiflash_config_t spiflash_config; +extern struct _spi_bdev_t spi_bdev; +#define MICROPY_HW_BDEV_IOCTL(op, arg) ( \ + (op) == BDEV_IOCTL_NUM_BLOCKS ? (MICROPY_HW_SPIFLASH_SIZE_BITS / 8 / FLASH_BLOCK_SIZE) : \ + (op) == BDEV_IOCTL_INIT ? spi_bdev_ioctl(&spi_bdev, (op), (uint32_t)&spiflash_config) : \ + spi_bdev_ioctl(&spi_bdev, (op), (arg)) \ +) +#define MICROPY_HW_BDEV_READBLOCKS(dest, bl, n) spi_bdev_readblocks(&spi_bdev, (dest), (bl), (n)) +#define MICROPY_HW_BDEV_WRITEBLOCKS(src, bl, n) spi_bdev_writeblocks(&spi_bdev, (src), (bl), (n)) + // MSI is used and is 4MHz #define MICROPY_HW_CLK_PLLM (1) #define MICROPY_HW_CLK_PLLN (40) |