diff options
6 files changed, 179 insertions, 0 deletions
diff --git a/ports/stm32/boards/GARATRONIC_PYBSTICK26_F411/board.json b/ports/stm32/boards/GARATRONIC_PYBSTICK26_F411/board.json new file mode 100644 index 000000000..1df9b6f65 --- /dev/null +++ b/ports/stm32/boards/GARATRONIC_PYBSTICK26_F411/board.json @@ -0,0 +1,13 @@ +{ + "deploy": [ + "../deploy.md" + ], + "docs": "", + "features": [], + "images": [], + "mcu": "stm32f4", + "product": "GARATRONIC_PYBSTICK26_F411", + "thumbnail": "", + "url": "https://shop.mchobby.be/product.php?id_product=1844", + "vendor": "McHobby" +} diff --git a/ports/stm32/boards/GARATRONIC_PYBSTICK26_F411/manifest.py b/ports/stm32/boards/GARATRONIC_PYBSTICK26_F411/manifest.py new file mode 100644 index 000000000..b09c7ab92 --- /dev/null +++ b/ports/stm32/boards/GARATRONIC_PYBSTICK26_F411/manifest.py @@ -0,0 +1,2 @@ +include("$(MPY_DIR)/extmod/uasyncio/manifest.py") +freeze("$(MPY_DIR)/drivers/", ("display/ssd1306.py")) diff --git a/ports/stm32/boards/GARATRONIC_PYBSTICK26_F411/mpconfigboard.h b/ports/stm32/boards/GARATRONIC_PYBSTICK26_F411/mpconfigboard.h new file mode 100644 index 000000000..408bc2851 --- /dev/null +++ b/ports/stm32/boards/GARATRONIC_PYBSTICK26_F411/mpconfigboard.h @@ -0,0 +1,84 @@ +#define MICROPY_HW_BOARD_NAME "PYBSTICK26_STD" +#define MICROPY_HW_MCU_NAME "STM32F411RE" +#define MICROPY_PY_THREAD (1) + +#define MICROPY_HW_HAS_SWITCH (1) +#define MICROPY_HW_HAS_FLASH (1) +#define MICROPY_HW_HAS_KXTJ3 (0) +#define MICROPY_HW_HAS_LCD (0) +#define MICROPY_HW_ENABLE_RTC (1) +#define MICROPY_HW_ENABLE_USB (1) +#define MICROPY_HW_ENABLE_SERVO (1) +#define MICROPY_HW_ENABLE_SDCARD (1) + +// HSE is 16MHz +#define MICROPY_HW_CLK_PLLM (16) +#define MICROPY_HW_CLK_PLLN (192) +#define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV2) +#define MICROPY_HW_CLK_PLLQ (4) +#define MICROPY_HW_CLK_LAST_FREQ (1) + +// Pybstick26 STD has an optional 32kHz crystal +#define MICROPY_HW_RTC_USE_LSE (1) +#define MICROPY_HW_RTC_USE_US (1) +#define MICROPY_HW_RTC_USE_CALOUT (0) + +// UART config +#define MICROPY_HW_UART1_NAME "XB" +#define MICROPY_HW_UART1_TX (pin_A15) +#define MICROPY_HW_UART1_RX (pin_A10) +#define MICROPY_HW_UART2_NAME "XA" +#define MICROPY_HW_UART2_TX (pin_A2) +#define MICROPY_HW_UART2_RX (pin_A3) +//#define MICROPY_HW_UART2_RTS (pin_A1) +//#define MICROPY_HW_UART2_CTS (pin_A0) +#define MICROPY_HW_UART6_NAME "YA" +#define MICROPY_HW_UART6_TX (pin_C6) +#define MICROPY_HW_UART6_RX (pin_C7) + +// I2C buses +#define MICROPY_HW_I2C1_NAME "X" +#define MICROPY_HW_I2C1_SCL (pin_B8) // S5 +#define MICROPY_HW_I2C1_SDA (pin_B9) // S3 +#define MICROPY_HW_I2C2_NAME "Y" +#define MICROPY_HW_I2C2_SCL (pin_B10) //S13 +#define MICROPY_HW_I2C2_SDA (pin_B3) // S11 + +// SPI buses +#define MICROPY_HW_SPI1_NAME "X" +#define MICROPY_HW_SPI1_NSS (pin_A4) // S26 +#define MICROPY_HW_SPI1_SCK (pin_A5) // S23 +#define MICROPY_HW_SPI1_MISO (pin_B4) // S21 +#define MICROPY_HW_SPI1_MOSI (pin_A7) // S19 +#define MICROPY_HW_SPI2_NAME "Y" +#define MICROPY_HW_SPI2_NSS (pin_B12) // S15 +#define MICROPY_HW_SPI2_SCK (pin_B13) // S16 +#define MICROPY_HW_SPI2_MISO (pin_B14) // S18 +#define MICROPY_HW_SPI2_MOSI (pin_C3) // S13 + +// USRSW has no pullup or pulldown, and pressing the switch makes the input go low +#define MICROPY_HW_USRSW_PIN (pin_C13) +#define MICROPY_HW_USRSW_PULL (GPIO_PULLUP) +#define MICROPY_HW_USRSW_EXTI_MODE (GPIO_MODE_IT_FALLING) +#define MICROPY_HW_USRSW_PRESSED (0) + +// The board has 4 LEDs +#define MICROPY_HW_LED1 (pin_A13) // red +#define MICROPY_HW_LED2 (pin_A14) // green +#define MICROPY_HW_LED3 (pin_B0) // yellow +#define MICROPY_HW_LED4 (pin_B1) // blue +#define MICROPY_HW_LED3_PWM { TIM3, 3, TIM_CHANNEL_3, GPIO_AF2_TIM3 } +#define MICROPY_HW_LED4_PWM { TIM3, 4, TIM_CHANNEL_4, GPIO_AF2_TIM3 } +#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_high(pin)) +#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin)) + +// SD card with custom SDIO pins +#define MICROPY_HW_SDCARD_D0 (pin_B7) +#define MICROPY_HW_SDCARD_D1 (pin_A8) +#define MICROPY_HW_SDCARD_D2 (pin_A9) +#define MICROPY_HW_SDCARD_D3 (pin_B5) +#define MICROPY_HW_SDCARD_CK (pin_B15) +#define MICROPY_HW_SDCARD_CMD (pin_A6) + +// USB config +#define MICROPY_HW_USB_FS (1) diff --git a/ports/stm32/boards/GARATRONIC_PYBSTICK26_F411/mpconfigboard.mk b/ports/stm32/boards/GARATRONIC_PYBSTICK26_F411/mpconfigboard.mk new file mode 100644 index 000000000..df9506522 --- /dev/null +++ b/ports/stm32/boards/GARATRONIC_PYBSTICK26_F411/mpconfigboard.mk @@ -0,0 +1,6 @@ +MCU_SERIES = f4 +CMSIS_MCU = STM32F411xE +AF_FILE = boards/stm32f411_af.csv +LD_FILES = boards/stm32f411.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/GARATRONIC_PYBSTICK26_F411/pins.csv b/ports/stm32/boards/GARATRONIC_PYBSTICK26_F411/pins.csv new file mode 100644 index 000000000..c52e65cf7 --- /dev/null +++ b/ports/stm32/boards/GARATRONIC_PYBSTICK26_F411/pins.csv @@ -0,0 +1,55 @@ +S1,3.3V +S2,VBUS +S3,PB9 +S4,VIN +S5,PB8 +S6,GND +S7,PB6 +S8,PA2 +S9,GND +S10,PA3 +S11,PB3 +S12,PA0 +S13,PB10 +S13A,PC3 +S14,Reset +S15,PB12 +S15A,PC5 +S16,PB13 +S16A,PC6 +S17,GND +S18,PB14 +S18A,PC7 +S19,PA7 +S20,GND +S21,PB4 +S22,PA10 +S23,PA5 +S24,PA15 +S25,GND +S26,PA4 +SW,PC13 +SW2,PB6 +LED_GREEN,PA14 +LED_YELLOW,PB0 +LED_RED,PA13 +LED_BLUE,PB1 +SD_D0,PB7 +SD_D1,PA8 +SD_D2,PA9 +SD_D3,PB5 +SD_CMD,PA6 +SD_CK,PB15 +USB_DM,PA11 +USB_DP,PA12 +OSC_IN,PH0 +OSC_OUT,PH1 +OSC32_IN,PC14 +OSC32_OUT,PC15 +QSPI_BK1_IO3,PA1 +SDIO_CMD,PA6 +SDIO_D1,PA8 +SDIO_D2,PA9 +SDIO_D3,PB5 +SDIO_D0,PB7 +SDIO_CK,PB15 diff --git a/ports/stm32/boards/GARATRONIC_PYBSTICK26_F411/stm32f4xx_hal_conf.h b/ports/stm32/boards/GARATRONIC_PYBSTICK26_F411/stm32f4xx_hal_conf.h new file mode 100644 index 000000000..7d6344f0a --- /dev/null +++ b/ports/stm32/boards/GARATRONIC_PYBSTICK26_F411/stm32f4xx_hal_conf.h @@ -0,0 +1,19 @@ +/* This file is part of the MicroPython project, http://micropython.org/ + * The MIT License (MIT) + * Copyright (c) 2019 Damien P. George + */ +#ifndef MICROPY_INCLUDED_STM32F4XX_HAL_CONF_H +#define MICROPY_INCLUDED_STM32F4XX_HAL_CONF_H + +#include "boards/stm32f4xx_hal_conf_base.h" + +// Oscillator values in Hz +#define HSE_VALUE (16000000) +#define LSE_VALUE (32768) +#define EXTERNAL_CLOCK_VALUE (12288000) + +// Oscillator timeouts in ms +#define HSE_STARTUP_TIMEOUT (100) +#define LSE_STARTUP_TIMEOUT (5000) + +#endif // MICROPY_INCLUDED_STM32F4XX_HAL_CONF_H |