diff options
Diffstat (limited to 'cc3200/simplelink/source/nonos.h')
| -rw-r--r-- | cc3200/simplelink/source/nonos.h | 325 |
1 files changed, 0 insertions, 325 deletions
diff --git a/cc3200/simplelink/source/nonos.h b/cc3200/simplelink/source/nonos.h deleted file mode 100644 index a888a90cf..000000000 --- a/cc3200/simplelink/source/nonos.h +++ /dev/null @@ -1,325 +0,0 @@ -/* - * nonos.h - CC31xx/CC32xx Host Driver Implementation - * - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ - * - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the - * distribution. - * - * Neither the name of Texas Instruments Incorporated nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * -*/ - -#ifndef __NONOS_H__ -#define __NONOS_H__ - -#ifdef __cplusplus -extern "C" { -#endif - - -#ifndef SL_PLATFORM_MULTI_THREADED - -/* This function call the user defined function, if defined, from the sync wait loop */ -/* The use case of this function is to allow nonos system to call a user function to put the device into sleep */ -/* The wake up should be activated after getting an interrupt from the device to Host */ -/* The user function must return without blocking to prevent a delay on the event handling */ -/* -#define _SlSyncWaitLoopCallback UserSleepFunction -*/ - - - -#define NONOS_WAIT_FOREVER 0xFF -#define NONOS_NO_WAIT 0x01 - -#define NONOS_RET_OK (0) -#define NONOS_RET_ERR (0xFF) -#define OSI_OK NONOS_RET_OK - -#define __NON_OS_SYNC_OBJ_CLEAR_VALUE 0x11 -#define __NON_OS_SYNC_OBJ_SIGNAL_VALUE 0x22 -#define __NON_OS_LOCK_OBJ_UNLOCK_VALUE 0x33 -#define __NON_OS_LOCK_OBJ_LOCK_VALUE 0x44 - -/*! - \brief type definition for the return values of this adaptation layer -*/ -typedef _i8 _SlNonOsRetVal_t; - -/*! - \brief type definition for a time value -*/ -typedef _u8 _SlNonOsTime_t; - -/*! - \brief type definition for a sync object container - - Sync object is object used to synchronize between two threads or thread and interrupt handler. - One thread is waiting on the object and the other thread send a signal, which then - release the waiting thread. - The signal must be able to be sent from interrupt context. - This object is generally implemented by binary semaphore or events. -*/ -typedef _u8 _SlNonOsSemObj_t; - - -#define _SlTime_t _SlNonOsTime_t - -#define _SlSyncObj_t _SlNonOsSemObj_t - -#define _SlLockObj_t _SlNonOsSemObj_t - -#define SL_OS_WAIT_FOREVER NONOS_WAIT_FOREVER - -#define SL_OS_RET_CODE_OK NONOS_RET_OK - -#define SL_OS_NO_WAIT NONOS_NO_WAIT - - - - - -/*! - \brief This function creates a sync object - - The sync object is used for synchronization between different thread or ISR and - a thread. - - \param pSyncObj - pointer to the sync object control block - - \return upon successful creation the function return 0 - Otherwise, a negative value indicating the error code shall be returned - \note - \warning -*/ -#define _SlNonOsSyncObjCreate(pSyncObj) _SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_CLEAR_VALUE) - -/*! - \brief This function deletes a sync object - - \param pSyncObj - pointer to the sync object control block - - \return upon successful deletion the function should return 0 - Otherwise, a negative value indicating the error code shall be returned - \note - \warning -*/ -#define _SlNonOsSyncObjDelete(pSyncObj) _SlNonOsSemSet(pSyncObj,0) - -/*! - \brief This function generates a sync signal for the object. - - All suspended threads waiting on this sync object are resumed - - \param pSyncObj - pointer to the sync object control block - - \return upon successful signaling the function should return 0 - Otherwise, a negative value indicating the error code shall be returned - \note the function could be called from ISR context - \warning -*/ -#define _SlNonOsSyncObjSignal(pSyncObj) _SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE) - -/*! - \brief This function waits for a sync signal of the specific sync object - - \param pSyncObj - pointer to the sync object control block - \param Timeout - numeric value specifies the maximum number of mSec to - stay suspended while waiting for the sync signal - Currently, the simple link driver uses only two values: - - NONOS_WAIT_FOREVER - - NONOS_NO_WAIT - - \return upon successful reception of the signal within the timeout window return 0 - Otherwise, a negative value indicating the error code shall be returned - \note - \warning -*/ -#define _SlNonOsSyncObjWait(pSyncObj , Timeout) _SlNonOsSemGet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE,__NON_OS_SYNC_OBJ_CLEAR_VALUE,Timeout) - -/*! - \brief This function clears a sync object - - \param pSyncObj - pointer to the sync object control block - - \return upon successful clearing the function should return 0 - Otherwise, a negative value indicating the error code shall be returned - \note - \warning -*/ -#define _SlNonOsSyncObjClear(pSyncObj) _SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_CLEAR_VALUE) - -/*! - \brief This function creates a locking object. - - The locking object is used for protecting a shared resources between different - threads. - - \param pLockObj - pointer to the locking object control block - - \return upon successful creation the function should return 0 - Otherwise, a negative value indicating the error code shall be returned - \note - \warning -*/ -#define _SlNonOsLockObjCreate(pLockObj) _SlNonOsSemSet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE) - -/*! - \brief This function deletes a locking object. - - \param pLockObj - pointer to the locking object control block - - \return upon successful deletion the function should return 0 - Otherwise, a negative value indicating the error code shall be returned - \note - \warning -*/ -#define _SlNonOsLockObjDelete(pLockObj) _SlNonOsSemSet(pLockObj,0) - -/*! - \brief This function locks a locking object. - - All other threads that call this function before this thread calls - the _SlNonOsLockObjUnlock would be suspended - - \param pLockObj - pointer to the locking object control block - \param Timeout - numeric value specifies the maximum number of mSec to - stay suspended while waiting for the locking object - Currently, the simple link driver uses only two values: - - NONOS_WAIT_FOREVER - - NONOS_NO_WAIT - - - \return upon successful reception of the locking object the function should return 0 - Otherwise, a negative value indicating the error code shall be returned - \note - \warning -*/ -#define _SlNonOsLockObjLock(pLockObj , Timeout) _SlNonOsSemGet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE,__NON_OS_LOCK_OBJ_LOCK_VALUE,Timeout) - -/*! - \brief This function unlock a locking object. - - \param pLockObj - pointer to the locking object control block - - \return upon successful unlocking the function should return 0 - Otherwise, a negative value indicating the error code shall be returned - \note - \warning -*/ -#define _SlNonOsLockObjUnlock(pLockObj) _SlNonOsSemSet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE) - - -/*! - \brief This function call the pEntry callback from a different context - - \param pEntry - pointer to the entry callback function - - \param pValue - pointer to any type of memory structure that would be - passed to pEntry callback from the execution thread. - - \param flags - execution flags - reserved for future usage - - \return upon successful registration of the spawn the function return 0 - (the function is not blocked till the end of the execution of the function - and could be returned before the execution is actually completed) - Otherwise, a negative value indicating the error code shall be returned - \note - \warning -*/ -_SlNonOsRetVal_t _SlNonOsSpawn(_SlSpawnEntryFunc_t pEntry , void* pValue , _u32 flags); - - -/*! - \brief This function must be called from the main loop in non-os paltforms - - \param None - - \return 0 - No more activities - 1 - Activity still in progress - \note - \warning -*/ -_SlNonOsRetVal_t _SlNonOsMainLoopTask(void); - -extern _SlNonOsRetVal_t _SlNonOsSemGet(_SlNonOsSemObj_t* pSyncObj, _SlNonOsSemObj_t WaitValue, _SlNonOsSemObj_t SetValue, _SlNonOsTime_t Timeout); -extern _SlNonOsRetVal_t _SlNonOsSemSet(_SlNonOsSemObj_t* pSemObj , _SlNonOsSemObj_t Value); -extern _SlNonOsRetVal_t _SlNonOsSpawn(_SlSpawnEntryFunc_t pEntry , void* pValue , _u32 flags); - -#if (defined(_SlSyncWaitLoopCallback)) -extern void _SlSyncWaitLoopCallback(void); -#endif - - -/***************************************************************************** - - Overwrite SimpleLink driver OS adaptation functions - - - *****************************************************************************/ - -#undef sl_SyncObjCreate -#define sl_SyncObjCreate(pSyncObj,pName) _SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_CLEAR_VALUE) - -#undef sl_SyncObjDelete -#define sl_SyncObjDelete(pSyncObj) _SlNonOsSemSet(pSyncObj,0) - -#undef sl_SyncObjSignal -#define sl_SyncObjSignal(pSyncObj) _SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE) - -#undef sl_SyncObjSignalFromIRQ -#define sl_SyncObjSignalFromIRQ(pSyncObj) _SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE) - -#undef sl_SyncObjWait -#define sl_SyncObjWait(pSyncObj,Timeout) _SlNonOsSemGet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE,__NON_OS_SYNC_OBJ_CLEAR_VALUE,Timeout) - -#undef sl_LockObjCreate -#define sl_LockObjCreate(pLockObj,pName) _SlNonOsSemSet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE) - -#undef sl_LockObjDelete -#define sl_LockObjDelete(pLockObj) _SlNonOsSemSet(pLockObj,0) - -#undef sl_LockObjLock -#define sl_LockObjLock(pLockObj,Timeout) _SlNonOsSemGet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE,__NON_OS_LOCK_OBJ_LOCK_VALUE,Timeout) - -#undef sl_LockObjUnlock -#define sl_LockObjUnlock(pLockObj) _SlNonOsSemSet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE) - -#undef sl_Spawn -#define sl_Spawn(pEntry,pValue,flags) _SlNonOsSpawn(pEntry,pValue,flags) - -#undef _SlTaskEntry -#define _SlTaskEntry _SlNonOsMainLoopTask - -#endif /* !SL_PLATFORM_MULTI_THREADED */ - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif |