diff options
Diffstat (limited to 'ports/stm32/extint.c')
| -rw-r--r-- | ports/stm32/extint.c | 22 |
1 files changed, 14 insertions, 8 deletions
diff --git a/ports/stm32/extint.c b/ports/stm32/extint.c index bb26b00dd..55c9095f1 100644 --- a/ports/stm32/extint.c +++ b/ports/stm32/extint.c @@ -91,7 +91,7 @@ #define EXTI_SWIER_BB(line) (*(__IO uint32_t *)(PERIPH_BB_BASE + ((EXTI_OFFSET + offsetof(EXTI_TypeDef, SWIER)) * 32) + ((line) * 4))) #endif -#if defined(STM32G4) || defined(STM32L4) || defined(STM32WB) +#if defined(STM32G4) || defined(STM32L4) || defined(STM32WB) || defined(STM32WL) // The L4 MCU supports 40 Events/IRQs lines of the type configurable and direct. // Here we only support configurable line types. Details, see page 330 of RM0351, Rev 1. // The USB_FS_WAKUP event is a direct type and there is no support for it. @@ -181,6 +181,12 @@ STATIC const uint8_t nvic_irq_channel[EXTI_NUM_VECTORS] = { RTC_Alarm_IRQn, TAMP_STAMP_LSECSS_IRQn, RTC_WKUP_IRQn, + #elif defined(STM32WL) + PVD_PVM_IRQn, + RTC_Alarm_IRQn, + TAMP_STAMP_LSECSS_SSRU_IRQn, // SSRU + TAMP_STAMP_LSECSS_SSRU_IRQn, // TAMP, RTC_STAMP, LSE_CSS + RTC_WKUP_IRQn, #else #if defined(STM32G4) || defined(STM32L4) PVD_PVM_IRQn, @@ -308,7 +314,7 @@ void extint_register_pin(const pin_obj_t *pin, uint32_t mode, bool hard_irq, mp_ pyb_extint_callback_arg[line] = MP_OBJ_FROM_PTR(pin); // Route the GPIO to EXTI - #if !defined(STM32WB) + #if !defined(STM32WB) && !defined(STM32WL) __HAL_RCC_SYSCFG_CLK_ENABLE(); #endif SYSCFG->EXTICR[line >> 2] = @@ -345,7 +351,7 @@ void extint_set(const pin_obj_t *pin, uint32_t mode) { pyb_extint_callback_arg[line] = MP_OBJ_FROM_PTR(pin); // Route the GPIO to EXTI - #if !defined(STM32WB) + #if !defined(STM32WB) && !defined(STM32WL) __HAL_RCC_SYSCFG_CLK_ENABLE(); #endif SYSCFG->EXTICR[line >> 2] = @@ -385,7 +391,7 @@ void extint_enable(uint line) { if (pyb_extint_mode[line] == EXTI_Mode_Interrupt) { #if defined(STM32H7) EXTI_D1->IMR1 |= (1 << line); - #elif defined(STM32G4) || defined(STM32WB) + #elif defined(STM32G4) || defined(STM32WB) || defined(STM32WL) EXTI->IMR1 |= (1 << line); #else EXTI->IMR |= (1 << line); @@ -393,7 +399,7 @@ void extint_enable(uint line) { } else { #if defined(STM32H7) EXTI_D1->EMR1 |= (1 << line); - #elif defined(STM32G4) || defined(STM32WB) + #elif defined(STM32G4) || defined(STM32WB) || defined(STM32WL) EXTI->EMR1 |= (1 << line); #else EXTI->EMR |= (1 << line); @@ -419,7 +425,7 @@ void extint_disable(uint line) { #if defined(STM32H7) EXTI_D1->IMR1 &= ~(1 << line); EXTI_D1->EMR1 &= ~(1 << line); - #elif defined(STM32G4) || defined(STM32WB) + #elif defined(STM32G4) || defined(STM32WB) || defined(STM32WL) EXTI->IMR1 &= ~(1 << line); EXTI->EMR1 &= ~(1 << line); #else @@ -441,7 +447,7 @@ void extint_swint(uint line) { return; } // we need 0 to 1 transition to trigger the interrupt - #if defined(STM32G4) || defined(STM32H7) || defined(STM32L4) || defined(STM32WB) + #if defined(STM32G4) || defined(STM32H7) || defined(STM32L4) || defined(STM32WB) || defined(STM32WL) EXTI->SWIER1 &= ~(1 << line); EXTI->SWIER1 |= (1 << line); #else @@ -519,7 +525,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_1(extint_obj_swint_obj, extint_obj_swint); /// \classmethod regs() /// Dump the values of the EXTI registers. STATIC mp_obj_t extint_regs(void) { - #if defined(STM32G4) || defined(STM32L4) || defined(STM32WB) + #if defined(STM32G4) || defined(STM32L4) || defined(STM32WB) || defined(STM32WL) printf("EXTI_IMR1 %08x\n", (unsigned int)EXTI->IMR1); printf("EXTI_IMR2 %08x\n", (unsigned int)EXTI->IMR2); printf("EXTI_EMR1 %08x\n", (unsigned int)EXTI->EMR1); |