| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2016-04-01 | examples: http_client.py, http_server.py aren't just unix, move to network/. | Paul Sokolovsky | |
| 2016-04-01 | py/map: Prevent map resize failure from destroying map. | Stephen Kyle | |
| 2016-04-01 | esp8266/uart: Get ctrl-C working now that event-based REPL is disabled. | Damien George | |
| 2016-04-01 | esp8266/uart: Comment out old, unused rx buffering code. | Damien George | |
| This was originally used for non-event based REPL processing. Then it was unused when event-based processing was activated. But now that event based is disabled, and non-event based is back, there has been new ring buffer code to process the chars. | |||
| 2016-04-01 | esp8266: Switch to non event-driven REPL to support paste mode. | Paul Sokolovsky | |
| 2016-04-01 | esp8266: Support dedicated REPL loop (aka pull-style). | Paul Sokolovsky | |
| Event-driven loop (push-style) is still supported and default (controlled by MICROPY_REPL_EVENT_DRIVEN setting, as expected). Dedicated loop worked even without adding ets_loop_iter(), though that needs to be revisited later. | |||
| 2016-04-01 | esp8266: Disallow recursive calls to REPL. | Paul Sokolovsky | |
| Before this change, if REPL blocked executing some code, it was possible to still input new statememts and excuting them, all leading to weird, and portentially dangerous interaction. TODO: Current implementation may have issues processing input accumulated while REPL was blocked. | |||
| 2016-04-01 | unix: implement -i option (inspect - start REPL after script is finished) | Pavol Rusnak | |
| 2016-04-01 | esp8266: Move PHY mode constants from modesp to modnetwork. | Paul Sokolovsky | |
| 2016-03-31 | esp8266: Reset term_obj on reboot. | Damien George | |
| Also, term_obj can be NULL if socket enables REPL duplication signalling before os.dupterm is called, so it should be checked. | |||
| 2016-03-31 | esp8266: Implement input part of dupterm handling. | Paul Sokolovsky | |
| The idea is following: underlying interrupt-driven or push-style data source signals that more data is available for dupterm processing via call to mp_hal_signal_dupterm_input(). This triggers a task which pumps data between actual dupterm object (which may perform additional processing on data from low-level data source) and input ring buffer. | |||
| 2016-03-30 | esp8266: Switch back to accumulating input data via ring buffer. | Paul Sokolovsky | |
| But now it's generic ring buffer implemented via ringbuf.h, and is intended for any type of input, including dupterm's, not just UART. The general process work like this: an interrupt-driven input source puts data into input_buf, and then signals new data available via call to mp_hal_signal_input(). | |||
| 2016-03-30 | esp8266: Fix issue when current repl line was garbage-collected. | Paul Sokolovsky | |
| Reference it from root pointers section. | |||
| 2016-03-30 | py/ringbuf.h: Add reusable ring buffer class. | Paul Sokolovsky | |
| Features inline get/put operations for the highest performance. Locking is not part of implementation, operation should be wrapped with locking externally as needed. | |||
| 2016-03-30 | docs: network: esp8266: .scan() is now synchronous and returns result list. | Paul Sokolovsky | |
| 2016-03-30 | docs: network: esp8266: status is WLAN object method. | Paul Sokolovsky | |
| 2016-03-30 | esp8266: Support synchronous wifi scanning. | Damien George | |
| That is: aps = if0.scan() TODO: make sure that returned list has tuple with values in "standard" order (whatever that standard is). | |||
| 2016-03-29 | py/parsenum: Use pow function to apply exponent to decimal number. | Damien George | |
| Pow is already a dependency when compiling with floats, so may as well use it here to reduce code size and speed up the conversion for most cases. | |||
| 2016-03-29 | py/formatfloat: Fix further cases of buffer overflow in formatting. | Damien George | |
| Includes extensive test cases to catch hopefully all cases where buffer might overflow. | |||
| 2016-03-29 | py/formatfloat: Fix case of float format where leading digit was "10". | Damien George | |
| When taking the logarithm of the float to determine the exponent, there are some edge cases that finish the log loop too large. Eg for an input value of 1e32-epsilon, this is actually less than 1e32 from the log-loop table and finishes as 10.0e31 when it should be 1.0e32. It is thus rendered as :e32 (: comes after 9 in ascii). There was the same problem with numbers less than 1. | |||
| 2016-03-29 | esp8266: Reduce heap size for now to avoid random segfaults on WiFi connect. | Paul Sokolovsky | |
| 2016-03-29 | esp8266: Let esp8266 "os" messages go to standard (REPL) UART. | Paul Sokolovsky | |
| That's definitely helpful for debugging. | |||
| 2016-03-29 | esp8266/esp_mphal: Add support for debug UART-only output. | Paul Sokolovsky | |
| Helpful when debugging dupterm support (because otherwise all output is spooled to dupterm too). To use: mp_printf(&mp_debug_print, "..."); | |||
| 2016-03-29 | esp8266: Enable uos.dupterm() method. | Paul Sokolovsky | |
| 2016-03-29 | esp8266: Add basic support for duplicating REPL output. | Paul Sokolovsky | |
| 2016-03-29 | esp8266: Implement os.urandom function. | Damien George | |
| Uses what is suspected to be a hardware random number generator. | |||
| 2016-03-28 | esp8266: Allow to build without FatFs support again. | Paul Sokolovsky | |
| 2016-03-28 | esp8266: Support importing modules from filesystem. | Paul Sokolovsky | |
| 2016-03-28 | docs: Correct pin interrupt example code for the WiPy. | danicampora | |
| 2016-03-28 | esp8266: Zero out fs_user_mount state on (soft) reset. | Damien George | |
| Otherwise device stays mounted on soft reset and leads to corruption (since block device object is now gone). | |||
| 2016-03-28 | esp8266/moduos: Add os.remove(), proxying to VFS object. | Paul Sokolovsky | |
| 2016-03-28 | esp8266/moduos: Factor out VFS method proxy helper. | Paul Sokolovsky | |
| 2016-03-28 | esp8266/moduos: Add listdir() proxy for MP_STATE_PORT(fs_user_mount)[0]. | Paul Sokolovsky | |
| I.e. os.listdir(...) will redirect to MP_STATE_PORT(fs_user_mount)[0].listdir(...). | |||
| 2016-03-28 | esp8266/moduos: Use mp_rom_map_elem_t for static const dictionary. | Damien George | |
| 2016-03-28 | esp8266: deploy: Use --flash_size=8m option to esptool.py. | Paul Sokolovsky | |
| Most esp8266 modules have at least 1MB (8Mbit) of flash. If not set, vendor functions allow to access only first 512K. | |||
| 2016-03-27 | esp8266/esp8266.ld: Put FatFs to FlashROM. | Paul Sokolovsky | |
| 2016-03-27 | esp8266: Enable FatFs support. | Paul Sokolovsky | |
| 2016-03-27 | esp8266/README: Update for the current status of the port. | Paul Sokolovsky | |
| 2016-03-27 | esp8266/modesp: flash_read(): Accept buffer to read to as a second argument. | Paul Sokolovsky | |
| 2016-03-27 | esp8266/modesp: flash_write(): Writes in multiples of 4 bytes. | Paul Sokolovsky | |
| 2016-03-27 | esp8266: Set up UART handling task soon into init process. | Paul Sokolovsky | |
| Otherwise, events may be posted to non-initialized task, which leads to segfaults. | |||
| 2016-03-27 | extmod/vfs_fat_diskio: Actually support sectors != 512 with Python blockdevs. | Paul Sokolovsky | |
| 2016-03-27 | unix/unix_mphal: Hack to make uos.dupterm() actually work. | Paul Sokolovsky | |
| See https://github.com/micropython/micropython/issues/1736 for the list of complications. This workaround instead of duplicating REPL to another stream, switches to it, because read(STDIN) we use otherwise is blocking call, so it and custom REPL stream can't be used together. | |||
| 2016-03-27 | py/stream: Fix stupid thinko with variable naming/shadowing. | Paul Sokolovsky | |
| 2016-03-27 | docs/esp8266: esp.mac() replaced with network.WLAN.mac(). | Paul Sokolovsky | |
| 2016-03-27 | docs/esp8266: esp.wifi_mode() replaced with network.WLAN.active(). | Paul Sokolovsky | |
| 2016-03-27 | docs/esp8266: phy_mode() moved to network module. | Paul Sokolovsky | |
| 2016-03-26 | esp8266: Put modpybi2c.o to FlashROM. | Paul Sokolovsky | |
| 2016-03-26 | esp8266/tests: Add neopixel.py test. | Damien George | |
| 2016-03-26 | esp8266: Add esp.neopixel_write function to bit-bang WS2812 data. | Damien George | |
 |
index : user/sven/micropython.git | |
| The MicroPython project | Sven Wegener |
| summaryrefslogtreecommitdiff |