| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2015-04-21 | docs: Bump version to 1.4.2.v1.4.2 | Damien George | |
| 2015-04-21 | acks: Add 2 names to ACKNOWLEDGEMENTS file. | Damien George | |
| 2015-04-20 | py: Make viper codegen raise proper exception (ViperTypeError) on error. | Damien George | |
| This fixes a long standing problem that viper code generation gave terrible error messages, and actually no errors on pyboard where assertions are disabled. Now all compile-time errors are raised as proper Python exceptions, and are of type ViperTypeError. Addresses issue #940. | |||
| 2015-04-19 | tools/pyboard.py: Make it 8-bit clean, so it works with unicode chars. | Damien George | |
| Addresses issue #1190. | |||
| 2015-04-19 | stmhal/pyexec.c: Make raw REPL mode 8-bit clean. | Damien George | |
| 2015-04-19 | cc3200: Fix bootloader and modpyb after printf overhaul. | Daniel Campora | |
| The bootloader needs string0.c because of memset, memcpy and others, without string0.c it magically links, but calling any of those functions results in a hard fault. In debug mode, modpyb needs printf, and including stdio.h leads to conflicts due to the redefinitions made in the simplelink drivers. | |||
| 2015-04-19 | qemu-arm: Disable inline asm tests that use floating point. | Damien George | |
| 2015-04-19 | py/inlinethumb: Support for core floating point instructions. | = | |
| Adds support for the following Thumb2 VFP instructions, via the option MICROPY_EMIT_INLINE_THUMB_FLOAT: vcmp vsqrt vneg vcvt_f32_to_s32 vcvt_s32_to_f32 vmrs vmov vldr vstr vadd vsub vmul vdiv | |||
| 2015-04-19 | py: Fix builtin ord so that it can handle bytes values >= 0x80. | Damien George | |
| Addresses issue #1188. | |||
| 2015-04-18 | stmhal: Provide ADC capabilities for F401 and F411 MCUs. | Damien George | |
| Simply needed to define which pins have which ADC channel on them. | |||
| 2015-04-18 | stmhal: Add support for STM32F411 MCU. | Damien George | |
| 2015-04-18 | stmhal: For flash storage use same params for F407 as F405. | Damien George | |
| 2015-04-18 | stmhal: Add support for Espruino Pico board. | Damien George | |
| To build: make BOARD=ESPRUINO_PICO To deploy: short the BOOT0/BTN contact on the back of the board (eg by drawing over it with a graphite pencil), then hold down BTN while inserting the board into the USB port. The board should then enter DFU mode, and the firmware can be downloaded using: make BOARD=ESPRUINO_PICO deploy | |||
| 2015-04-18 | stmhal: Add stm32f401.ld for linking F401 targets. | Damien George | |
| 2015-04-18 | stmhal: Make ld and af files configurable within Makefile. | Damien George | |
| Each board now needs an mpconfigboard.mk file which defines AF_FILE and LD_FILE. Also moved stm32f405.ld to boards/ directory to keep things organised. | |||
| 2015-04-18 | stmhal: Add stm32f401_af.csv, for AF definitions of F401 MCUs. | Damien George | |
| 2015-04-18 | stmhal: Rename stm32f4xx_af.csv to stm32f405_af.csv. | Damien George | |
| Since this file is only valid for F405 MCUs, not generic F4xx. | |||
| 2015-04-18 | stmhal: Add support for flash filesystem on F401 MCUs. | Damien George | |
| It uses a 16k cache buffer and so the filesystem size is limited. | |||
| 2015-04-18 | stmhal: Allow extint.c to compile without USB HS support. | Damien George | |
| 2015-04-18 | stmhal: Make I2C busses and their pins configurable in mpconfigboard.h. | Damien George | |
| 2015-04-18 | stmhal: Exclude code for UARTs that don't exist in hardware. | Damien George | |
| 2015-04-18 | stmhal: Exclude USB HS code when USB HS mode not enabled. | Damien George | |
| 2015-04-18 | stmhal: Exclude code for those timers that don't exist in the hardware. | Damien George | |
| 2015-04-18 | stmhal: Make LCD initialiser use board pin names instead of cpu names. | Damien George | |
| 2015-04-18 | stmhal: For pins, define macros mapping board names to cpu names. | Damien George | |
| 2015-04-18 | stmhal: Make a HW config option for LED4 being controlled by PWM. | Damien George | |
| 2015-04-18 | stmhal: Make HSE PLL parameters configurable per board. | Damien George | |
| 2015-04-18 | README.md: Add the CC3200 port to the list of additional components. | Daniel Campora | |
| 2015-04-18 | stmhal: Add support for sending and receiving CAN RTR messages. | Henrik | |
| 2015-04-18 | cc3200: Clean up and reduce use/include of std.h. | Damien George | |
| 2015-04-18 | stmhal: Remove std.h. It's not needed anymore. | Damien George | |
| 2015-04-18 | lib/libc/string0.c: Remove include of std.h, replace with string.h. | Damien George | |
| Much more portable this way. | |||
| 2015-04-18 | py/vstr.c: Allow vstr_printf to print correctly to a fixed buffer. | Damien George | |
| This patch allows vstr_printf to use all the available space of a fixed vstr buffer. vstr_printf is a good alternative to snprintf. | |||
| 2015-04-17 | cc3200: Use new %q format to print qstr's where appropiate. | Daniel Campora | |
| 2015-04-17 | cc3200: Clean up bootloader makefile and remove superflous assert. | Daniel Campora | |
| 2015-04-17 | acks: Add 1 name to the ACKNOWLEDGEMENTS file. | Damien George | |
| 2015-04-16 | stmhal: Allow sending CAN messages with timeout=0. | Damien George | |
| Thanks to Henrik Sölver for this patch. | |||
| 2015-04-16 | stmhal: Use new %q format to print qstr's in a few more places. | blmorris | |
| Saves 68 bytes. | |||
| 2015-04-16 | Add .gitattributes file to force text line endings to LF. | Damien George | |
| Some files are excluded, otherwise a whole lot of files need converting. | |||
| 2015-04-16 | logo: Change line endings in FONT-LICENSE.txt from CRLF to LF. | Damien George | |
| 2015-04-16 | tests: Convert line endings in fun_name.py from CRLF to LF. | Damien George | |
| 2015-04-16 | qemu-arm: Get compiling again with recent changes to print framework. | Damien George | |
| 2015-04-16 | cc3200: Get bootloader compiling with latest overhaul of printf code. | Damien George | |
| 2015-04-16 | py: Add %q format support to mp_[v]printf, and use it. | Damien George | |
| 2015-04-16 | py: Convert occurrences of non-debug printf to mp_printf. | Damien George | |
| 2015-04-16 | py: Make mp_sys_stdout_print object, wrapping sys.stdout for mp_print*. | Damien George | |
| So now all printing should go via either mp_plat_print or mp_sys_stdout_print. | |||
| 2015-04-16 | py: Overhaul and simplify printf/pfenv mechanism. | Damien George | |
| Previous to this patch the printing mechanism was a bit of a tangled mess. This patch attempts to consolidate printing into one interface. All (non-debug) printing now uses the mp_print* family of functions, mainly mp_printf. All these functions take an mp_print_t structure as their first argument, and this structure defines the printing backend through the "print_strn" function of said structure. Printing from the uPy core can reach the platform-defined print code via two paths: either through mp_sys_stdout_obj (defined pert port) in conjunction with mp_stream_write; or through the mp_plat_print structure which uses the MP_PLAT_PRINT_STRN macro to define how string are printed on the platform. The former is only used when MICROPY_PY_IO is defined. With this new scheme printing is generally more efficient (less layers to go through, less arguments to pass), and, given an mp_print_t* structure, one can call mp_print_str for efficiency instead of mp_printf("%s", ...). Code size is also reduced by around 200 bytes on Thumb2 archs. | |||
| 2015-04-16 | objarray: Support assignment of bytes to bytearray slice. | Paul Sokolovsky | |
| 2015-04-14 | acks: Add 2 names to the ACKNOWLEDGEMENTS file. | Damien George | |
| 2015-04-14 | cc3200: Correct the IP address byte order in the FTP server. | Daniel Campora | |
 |
index : user/sven/micropython.git | |
| The MicroPython project | Sven Wegener |
| summaryrefslogtreecommitdiff |