| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Ronald Weber <ronaldxweber@gmail.com>
|
|
This commit upgrades from codespell==2.2.6 to the current codespell==2.4.1,
adding emac to the ignore-words-list.
Signed-off-by: Christian Clauss <cclauss@me.com>
|
|
URLs in `package.json` may now be specified relative to the base URL of the
`package.json` file.
Relative URLs wil work for `package.json` files installed from the web as
well as local file paths.
Docs: update `docs/reference/packages.rst` to add documentation for:
- Installing packages from local filesystems (PR #12476); and
- Using relative URLs in the `package.json` file (PR #12477);
- Update the packaging example to encourage relative URLs as the default
in `package.json`.
Add `tools/mpremote/tests/test_mip_local_install.sh` to test the
installation of a package from local files using relative URLs in the
`package.json`.
Signed-off-by: Glenn Moloney <glenn.moloney@gmail.com>
|
|
This commit enables support for DTLS, i.e. TLS over datagram transport
protocols like UDP. While support for DTLS is absent in CPython, it is
worth supporting it in MicroPython because it is the basis of the
ubiquitous CoAP protocol, used in many IoT projects.
To select DTLS, a new set of "protocols" are added to SSLContext:
- ssl.PROTOCOL_DTLS_CLIENT
- ssl.PROTOCOL_DTLS_SERVER
If one of these is set, the library assumes that the underlying socket is a
datagram-like socket (i.e. UDP or similar).
Our own timer callbacks are implemented because the out of the box
implementation relies on `gettimeofday()`.
This new DTLS feature is enabled on all ports that use mbedTLS.
This commit is an update to a previous PR #10062.
Addresses issue #5270 which requested DTLS support.
Signed-off-by: Keenan Johnson <keenan.johnson@gmail.com>
|
|
Signed-off-by: Damien George <damien@micropython.org>
|
|
This commit adds a clarification for the ESPNow module's documentation
regarding its "config" method.
The original documentation for that method could be interpreted as having
all its configuration keys being able to be queried, but the "rate"
configuration key is actually write-only due to ESP-IDF's lack of a way to
retrieve that bit of information from the radio's configuration. The
documentation changes highlight the fact that said configuration key is
actually write-only.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
|
|
Also add some additional context links, suggestions for alternative
classes, etc.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
Also add the default values of these macros to the respective
`mpconfigport.h` files, to improve discoverability.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
Also cross-link with the other WIZNET5K driver, to avoid confusion.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
Side-setting can also be used to change pin directions instead of pin
values. This adds a parameter `side_pindir` to decorator `asm_pio()` to
configure it.
Also replaces a few close-by 0s with corresponding PIO.* constants.
Addresses issue #10027.
Signed-off-by: Markus Gyger <markus@gyger.org>
|
|
The table shows the devices available at the pin and the respective package
letter.
Signed-off-by: robert-hh <robert@hammelrath.com>
|
|
Only pins accessible at the board are shown.
Signed-off-by: robert-hh <robert@hammelrath.com>
|
|
Signed-off-by: Damien George <damien@micropython.org>
|
|
The user already has it open, and its customised for their
particular board.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
Includes fixing the flashing address for newer SoCs, as reported in
discussion https://github.com/orgs/micropython/discussions/16417
Also removes some redundant or out of date information, and adds links to
the Espressif esptool docs which are quite comprehensive.
Information about ESP32_GENERIC variants is moved to the board page, as it
only applies to that board.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
Not every baudrate or sample point combination has an exact match,
but getting within 1% on sample point and .1% on baud rate should
always be good enough.
Because the search goes from shorter bit periods (lowest brp) and
increases, the first match which meets this criteria should still mostly be
the best available.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
Signed-off-by: Damien George <damien@micropython.org>
|
|
This commit adds support for RV32IMC native modules, as in embedding native
code into a self-contained MPY module and and make its exported functions
available to the MicroPython environment.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
|
|
Support was added in commit 5f2d05d, this updates the docs to match.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
This commit makes the argument ordering of `machine.RTC.init()` the same
for all the ports that implement arguments to this method: cc3200, esp32,
mimxrt and samd. The cc3200 argument ordering is used, which matches the
documentation.
Also document the availability and the differing semantics for the stm32
and renesas-ra port.
Signed-off-by: robert-hh <robert@hammelrath.com>
|
|
This is not part of the common machine API. It's dropped on the mimxrt
port and kept only on the cc3200 port for legacy.
Also show the port availability of `RTC.now()` in the documentation.
Signed-off-by: robert-hh <robert@hammelrath.com>
|
|
Such that it matches the implementation and the documentation of the
`machine.RTC` class.
Signed-off-by: robert-hh <robert@hammelrath.com>
|
|
The current documentation for the `machine.RTC` class contains information
about the `RTC.cancel` method for cancelling pending alarms.
However only two ports (cc3200 and mimxrt) implement this functionality
but under a different name: `RTC.alarm_cancel`. The mimxrt port also
implements `RTC.cancel` but it is aliased to `RTC.alarm_cancel` anyway.
To maintain naming consistency, this commit updates the documentation to
officially define `RTC.alarm_cancel` as the method to call to cancel
pending alarms and deprecates mimxrt's `RTC.cancel` implementation.
`RTC.cancel` in the mimxrt port is thus scheduled for removal in
MicroPython v2.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
|
|
Signed-off-by: Amirreza Hamzavi <amirrezahamzavi2000@gmail.com>
|
|
Signed-off-by: chuangjinglu <chuangjinglu@outlook.com>
|
|
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
Test currently passes. It was added so it can be used to check for
regressions when fixing channel selection for AP mode in a follow-up
commit.
Also add some docs about how channel setting is observed to work for
ESP-NOW.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
The docs have been authored by many people now. Instead of singling out
individuals in the copyright line, prefer to mention all "MicroPython
authors and contributors".
Individual contributions can still be discovered via the git history.
Signed-off-by: Damien George <damien@micropython.org>
|
|
This is currently an implementation detail of MicroPython rather than by
design.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
Previously individual ports documented these aspects to varying degrees,
but most of the information is common to all ports.
In particular, this adds a canonical explanation of `boot.py` and
`main.py`.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
The following ports used 65536 as the upper value (100% duty cycle) and are
changed in this commit to use 65535: esp8266, mimxrt, nrf, samd.
Tested that output is high at `duty_u16(65535)` and low at `duty_u16(0)`.
Also verified that at `duty_u16(32768)` the high and low pulse have the
same length.
Partially reverts #10850, commits 9c7ad68165bcd224c94ca6d8f172362cf8000d99
and 2ac643c15bec8c88ece0e944ce58f36d02dfd2dd.
Signed-off-by: robert-hh <robert@hammelrath.com>
|
|
This makes the stream that the PPP object wraps, which is normally only set
once via the constructor, accessible and configurable via the
`ppp.config()` method.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
|
|
Removes the deprecated network.[AP|STA]_IF form from the docs.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
Previously to this commit, running the test suite on a bare-metal board
required specifying the target (really platform) and device, eg:
$ ./run-tests.py --target pyboard --device /dev/ttyACM1
That's quite a lot to type, and you also need to know what the target
platform is, when a lot of the time you either don't care or it doesn't
matter.
This commit makes it easier to run the tests by replacing both of these
options with a single `--test-instance` (`-t` for short) option. That
option specifies the executable/port/device to test. Then the target
platform is automatically detected.
The `--test-instance` can be passed:
- "unix" (the default) to use the unix version of MicroPython
- "webassembly" to test the webassembly port
- anything else is considered a port/device to pass to Pyboard
There are also some shortcuts to specify a port/device, following
`mpremote`:
- a<n> is short for /dev/ttyACM<n>
- u<n> is short for /dev/ttyUSB<n>
- c<n> is short for COM<n>
For example:
$ ./run-tests.py -t a1
Note that the default test instance is "unix" and so this commit does not
change the standard way to run tests on the unix port, by just doing
`./run-tests.py`.
As part of this change, the platform (and it's native architecture if it
supports importing native .mpy files) is show at the start of the test run.
Signed-off-by: Damien George <damien@micropython.org>
|
|
Descripton of mip usage with micropython port suggest using it like this:
./micropython -m mip install --target=third-party pkgname
But it should be called without equal sign:
./micropython -m mip install --target third-party pkgname
Signed-off-by: honza.klu@gmail.com
|
|
Prior to this commit, when flushing a UART on the rp2 port, it returns just
before the last character is sent out the wire.
Fix this by waiting until the BUSY flag is cleared.
This also fixes the behaviour of `UART.txdone()` to return `True` only when
the last byte has gone out.
Updated docs and tests to match. The test now checks that UART TX time is
very close to the expected time (prior, it was just testing that the TX
time was less than the expected time).
Signed-off-by: Damien George <damien@micropython.org>
|
|
Add support for 32 and 48 pin variants of RP2350.
Add new `PIO.gpio_base()` method, mirroring the Pico SDK.
Signed-off-by: Phil Howard <phil@gadgetoid.com>
Signed-off-by: Damien George <damien@micropython.org>
|
|
This commit adds general support for ESP32-C6 SoCs.
Signed-off-by: Andrew Leech <andrew@alelec.net>
|
|
Signed-off-by: Damien George <damien@micropython.org>
|
|
Zephyr v3.7.0 added a new feature to allow getting devices by their
devicetree node labels. Use this feature in the MicroPython Zephyr port
to simplify constructing machine module objects, including Pin, SPI,
I2C, and UART. It's still possible to use the more verbose device names
(e.g., gpio@400ff040, i2c@40066000, spi@4002c000), but now we can also
use their devicetree node labels (e.g., gpiob, i2c0, spi0).
Node labels aren't standardized across all SoC families because they
generally try to follow their respective SoC hardware user manual naming
convention, however many boards define common labels for devices routed
to Arduino headers (e.g., arduino_i2c, arduino_serial, and arduino_spi).
That means I2C("arduino_i2c") will work on quite a few boards (>100 in
the main Zephyr tree).
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
|
|
Updates the Zephyr port build instructions and CI to use the latest
Zephyr release tag.
Tested on frdm_k64f.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
|
|
Zephyr v3.2.0 deprecated the devicetree label property as a base
property, which had been used as the device name string for
device_get_binding(). The device name string is now the devicetree node
name appended with its unit-address. Update Zephyr port documentation
to reflect this change.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
|
|
This commit adds a new `RingIO` type which exposes the internal ring-buffer
code for general use in Python programs. It has the stream interface
making it similar to `StringIO` and `BytesIO`, except `RingIO` has a fixed
buffer size and is automatically safe when reads and writes are in
different threads or an IRQ.
This new type is enabled at the "extra features" ROM level.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
|
|
Otherwise it's very difficult to reason about thread safety in a
scheduler callback, as it can run at any time on any thread - including
racing against any bytecode operation on any thread.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
Original commit was by @millosolomillo from 2022, but CI no longer accepts
their auto-generated GitHub commit email...
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
The functionality is there but was not documented.
Signed-off-by: Damien George <damien@micropython.org>
|
|
Fix documentation to match behaviour (directories are not preserved).
Fixes issue #11101.
Signed-off-by: Damien George <damien@micropython.org>
|
|
Signed-off-by: Paul Grayson <pdg@alum.mit.edu>
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
