| Age | Commit message (Collapse) | Author |
|---|
|
This commit upgrades from codespell==2.2.6 to the current codespell==2.4.1,
adding emac to the ignore-words-list.
Signed-off-by: Christian Clauss <cclauss@me.com>
|
|
This works similarly to the existing support in "bare metal" make ports,
with the caveat that CMake will only set this value on a clean build and
will reuse the previous value otherwise.
This is slightly different to the CMake built-in support for CFLAGS,
as this variable is used when evaluating source files for qstr
generation, etc.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
This commit implements a small subset of the CPython `marshal` module. It
implements `marshal.dumps()` and `marshal.loads()`, but only supports
(un)marshalling code objects at this stage. The semantics match CPython,
except that the actual marshalled bytes is not compatible with CPython's
marshalled bytes.
The module is enabled at the everything level (only on the unix coverage
build at this stage).
Signed-off-by: Damien George <damien@micropython.org>
|
|
Serialises a bytecode function/generator to a valid .mpy as bytes.
Signed-off-by: Damien George <damien@micropython.org>
|
|
This allows retrieving the code object of a function using
`function.__code__`, and then reconstructing a function from a code object
using `FunctionType(code_object)`.
This feature is controlled by `MICROPY_PY_FUNCTION_ATTRS_CODE` and is
enabled at the full-features level.
Signed-off-by: Damien George <damien@micropython.org>
|
|
The `mp_obj_code_t` and `mp_type_code` code object was defined internally
in both `py/builtinevex.c` and `py/profile.c`, with completely different
implementations (the former very minimal, the latter quite complete).
This commit factors these implementations into a new, separate source file,
and allows the code object to have four different modes, selected at
compile-time:
- MICROPY_PY_BUILTINS_CODE_NONE: code object not included in the build.
- MICROPY_PY_BUILTINS_CODE_MINIMUM: very simple code object that just holds
a reference to the function that it represents. This level is used when
MICROPY_PY_BUILTINS_COMPILE is enabled.
- MICROPY_PY_BUILTINS_CODE_BASIC: simple code object that holds a reference
to the proto-function and its constants.
- MICROPY_PY_BUILTINS_CODE_FULL: almost complete implementation of the code
object. This level is used when MICROPY_PY_SYS_SETTRACE is enabled.
Signed-off-by: Damien George <damien@micropython.org>
|
|
This commit fixes two Xtensa sequences in order to terminate early when
loading and storing word values via an immediate index.
This was meant to be part of 55ca3fd67512555707304c6b68b836eb89f09d1c
but whilst it was part of the code being tested, it didn't end up in the
commit.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
|
|
This commit marks as const the condition code tables used when figuring
out which opcode sequence must be emitted depending on the requested
comparison type.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
|
|
When a port automatically compiles `mpy-cross`, if `USER_C_MODULES` is
provided by the user on the command line then it is also applied to the
`mpy-cross` build. That can lead to build errors if the path is relative
and not found when building `mpy-cross`.
Fix that by explicitly resetting `USER_C_MODULES` when invoking the
`mpy-cross` build.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
|
|
- Renamed gc_sweep to gc_sweep_free_blocks.
- Call gc_sweep_run_finalisers from top level.
- Reordered the gc static functions to be in approximate
runtime sequence (with forward declarations) rather than
in declaration order.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
Enabled by default if using threading and no GIL
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
Do this by tracking being inside gc collection with a
separate flag, GC_COLLECT_FLAG. In gc_free(),
ignore this flag when determining if the heap is locked.
* For finalisers calling gc_free() when heap is otherwise unlocked,
this allows memory to be immediately freed (potentially
avoiding a MemoryError).
* Hard IRQs still can't call gc_free(), as heap will be locked via
gc_lock().
* If finalisers are disabled then all of this code can be compiled
out to save some code size.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
Currently a finalizer may run and access memory which has already been
freed. (This happens mostly during gc_sweep_all() but could happen during
any garbage collection pass.)
Includes some speed improvement tweaks to skip empty FTB blocks. These help
compensate for the inherent slowdown of having to walk the heap twice.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
Follow up to 13b13d1fdd05549d504eeded0b5aa8871d5e5dcf, based on some
testing on godbolt, the manual code optimisation seems unnecessary for code
size, at least on gcc x86_64 and ARM, and it's definitely not good for
clarity.
Signed-off-by: Jeff Epler <jepler@gmail.com>
|
|
The way CMake gathers the submodule list, it can quietly be empty
if the previous step fails. This makes it an explicit error.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
This commit introduces the ability to emit optimised code paths on
Xtensa for load/store operations indexed via an immediate offset.
If an immediate offset for a load/store operation is within a certain
range that allows it to be embedded into an available opcode then said
opcode is emitted instead of the generic code sequence.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
|
|
This commit improves the RV32 code sequence that is emitted if a
function needs to set up an exception handler as its prologue.
The old code would clear a temporary register and then copy that value
to places that needed to be initialised with zero values. On RV32
there's a dedicated register that's hardwired to be equal to zero, which
allows us to bypass the extra register clear and use the zero register
to initialise values.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
|
|
This commit improves the emitted code sequences for address generation
in the Viper subsystem when loading/storing 16 and 32 bit values via a
register offset.
The Xtensa opcodes ADDX2 and ADDX4 are used to avoid performing the
extra shifts to align the final operation offset. Those opcodes are
available on both xtensa and xtensawin MicroPython architectures.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
|
|
This includes making int("01") parse in base 10 like standard Python.
When a base of 0 is specified it means auto-detect based on the prefix, and
literals begining with 0 (except when the literal is all 0's) like "01" are
then invalid and now throw an exception.
The new error message is different from CPython. It says e.g.,
`SyntaxError: invalid syntax for integer with base 0: '09'`
Additional test cases were added to cover the changed & added code.
Co-authored-by: Damien George <damien@micropython.org>
Signed-off-by: Jeff Epler <jepler@gmail.com>
|
|
The esp32 IDF toolchain can give a "may be used uninitialized" warning, at
least for ESP32-S3 with gcc 14.2.0. Silence that warning by initializing
the variable with NULL.
Co-authored-by: Daniel van de Giessen <daniel@dvdgiessen.nl>
Signed-off-by: IhorNehrutsa <Ihor.Nehrutsa@gmail.com>
|
|
Otherwise the comment is printed each time the rule is run.
Follow up to fdd606dd5395d9c474775945fa4458a27199653b.
Signed-off-by: Damien George <damien@micropython.org>
|
|
This commit fixes code generation for loading halfwords using an offset
greater than 255.
The old code blindly encoded the offset into a `LDRH Rd, [Rn, #imm]`
opcode, but only the lowest 8 bits would be put into the opcode itself.
This commit instead generates a two-opcodes sequence, a constant load into
R8, and then `LDRH Rd, [Rn, R8]`.
This fixes `tests/extmod/vfs_rom.py` for the qemu/SABRELITE board.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
|
|
This commit fixes code generation for loading a local's address if its
index is greater than 63.
The old code blindly encoded the offset into an `ADD Rd, Rn, #imm` opcode,
but only the lowest 8 bits would be put into the opcode itself. This
commit instead generates a two-opcodes sequence, a constant load into R8,
and then an `ADD Rd, Rn, R8` opcode.
This fixes `tests/float/math_domain.py` for the qemu/SABRELITE board.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
|
|
Co-authored-by: Alessandro Gatti <a.gatti@frob.it>
Signed-off-by: Damien George <damien@micropython.org>
|
|
Prior to this fix, the assembler generated `LDRH Rd, [Rn, #imm]!`, so the
second `LDRH` from the same origin would load from the wrong base.
Co-authored-by: Alessandro Gatti <a.gatti@frob.it>
Signed-off-by: Damien George <damien@micropython.org>
|
|
Fixes gcc warning when -Wsign-conversion is on.
Signed-off-by: Yoctopuce <dev@yoctopuce.com>
|
|
Fixes compilation warning C4307: '+': integral constant overflow.
Signed-off-by: Yoctopuce <dev@yoctopuce.com>
|
|
This commit adds support for writing inline assembler functions when
targeting a RV32IMC processor.
Given that this takes up a bit of rodata space due to its large
instruction decoding table and its extensive error messages, it is
enabled by default only on offline targets such as mpy-cross and the
qemu port.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
|
|
This makes the existing popcount(uint32_t) implementation found in the
RV32 emitter available to the rest of the codebase. This version of
popcount will use intrinsic or builtin implementations if they are
available, falling back to a generic implementation if that is not the
case.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
|
|
This adds an optimisation for loading .mpy files from a reader that points
to ROM. In such a case qstr, str and bytes data, along with bytecode, are
all referenced in-place in ROM.
Signed-off-by: Damien George <damien@micropython.org>
|
|
This allows accessing data directly in ROM if the reader supports it.
Signed-off-by: Damien George <damien@micropython.org>
|
|
Allows an interned string to reference static/ROM data, instead of
allocating it on the GC heap.
Signed-off-by: Damien George <damien@micropython.org>
|
|
This commit defines a new ROMFS filesystem for storing read-only files that
can be memory mapped, and a new VfsRom driver. Files opened from this
filesystem support the buffer protocol. This allows naturally getting the
memory-mapped address of the file using:
- memoryview(file)
- uctypes.addressof(file)
Furthermore, if these files are .mpy files then their content can be
referenced in-place when importing. Such imports take up a lot less RAM
than importing from a normal filesystem. This is essentially dynamically
frozen .mpy files, building on the revamped v6 .mpy file format.
Signed-off-by: Damien George <damien@micropython.org>
|
|
This commit adds the compiled native module file to the list of files to
remove when `make clean` is issued in a native module source directory.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
|
|
This commit adds support for RV32IMC native modules, as in embedding native
code into a self-contained MPY module and and make its exported functions
available to the MicroPython environment.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
|
|
Enabled by default. Useful for ports that need the VFS but don't have any
writable filesystems.
Signed-off-by: Damien George <damien@micropython.org>
|
|
MicroPython relies on a number of submodules for third party and chip
vendor libraries. Users need to check these out before building their
desired ports and Github Actions CI here needs to clone them all multiple
times for every build. Many of these are getting significantly larger over
time, slowing down usage and consuming more disk space.
Newer versions of git have features to avoid pulling all historic / blob
data which can have a significant impact of total data use. This commit
uses a standard feature of git to do a partial clone, with automatic
fallback to previous behavior on error.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
|
|
This commit fixes a warning occurring on Clang when calling
`__builtin___clear_cache` with non-void pointers for its start and end
memory area locations. The code now uses a char pointer for the end
location, and it still builds without warnings on GCC.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
|
|
Use an explicit cast to suppress the implicit conversion which started
popping up in recent compiler versions (and wasn't there yet in 07bf3179).
Signed-off-by: stijn <stijn@ignitron.net>
|
|
Allows verbose build to work the same on esp32 port as other ports.
To minimise copy/paste, split the BUILD_VERBOSE section of mkenv.mk
out to its own verbose.mk and include this in the port Makefile.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
Recent MSVC versions have changed the definition of NAN to a non-constant
expression! This is a bug, C standard says it should be a constant.
Good explanation and workaround at: https://stackoverflow.com/a/79199887
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
|
|
This mirrors how it works when using a Makefile.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
|
|
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
|
|
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
|
|
In `deque_subscr()`, if `index_val` equals `self->alloc`, the index
correction `index_val -= self->alloc` does not execute, leading to an
out-of-bounds access in `self->items[index_val]`.
The fix in this commit ensures that the index correction is applied
whenever `index_val >= self->alloc`, preventing access beyond the allocated
buffer size.
Signed-off-by: Jan Sturm <jansturm92@googlemail.com>
|
|
The PIC16 port didn't catch up with the other ports, so it required a bit
of work to make it build with the latest version of XC16.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
|
|
Signed-off-by: Damien George <damien@micropython.org>
|
|
Signed-off-by: Damien George <damien@micropython.org>
|
|
This is necessary for mbedTLS callbacks that do not carry any user state,
so those callbacks can be customised per SSL context.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
|
|
When descriptors are enabled, lookup of the `__get__`, `__set__` and
`__delete__` descriptor methods should not be delegated to `__getattr__`.
That follows CPython behaviour.
Signed-off-by: Damien George <damien@micropython.org>
|
