| Age | Commit message (Collapse) | Author |
|---|
|
2dcd1578c4 left the --role option undocumented, which is
inconsistent with other deprecated options such as pg_dump's
--blobs and --no-blobs. This change adds --role back to
createuser's documentation and usage output and marks it as
deprecated.
Suggested-by: Peter Eisentraut
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/0e85c9e7-4804-1cdb-5a4a-c72c328f9ad8%40enterprisedb.com
|
|
Commit f62975b2a made headerscheck and cpluspluscheck a little
smarter than this documentation gave them credit for. Make
their docs match current reality. Also add a warning about the
layer of dust that has settled on the rest of these scripts.
Discussion: https://postgr.es/m/769950.1684797558@sss.pgh.pa.us
|
|
This file could be in the current (build) directory if we just
built it. However, when installing from a VPATH build from a
tarball, it will exist in the source directory and gmake will
therefore not rebuild it. Use the $< macro to find out where
gmake found it.
Oversight in b3a0d8324, which also exposes a buildfarm testing gap:
we test install from VPATH builds from bare source trees, but not
from tarballs.
Per report from Christoph Berg.
Discussion: https://postgr.es/m/ZGzEAqjxkkoY3ooH@msg.df7cb.de
|
|
Similar to client_min_messages etc.
|
|
|
|
|
|
Reported-by: John Naylor
Discussion: https://postgr.es/m/CAFBsxsEuAx4_nq=200u=70S5r83C2hzO-a9+c6YXTCbOFeDAfw@mail.gmail.com
|
|
|
|
Reported-by: Jonathan Katz
Discussion: https://postgr.es/m/2fd2cc0e-df39-3e77-8fcf-35aad5796b0a@postgresql.org
|
|
That's how other boolean options are handled, so do likewise.
The previous coding with "enable" and "disable" was seemingly
modeled on gssencmode, but that's a three-way flag.
While at it, add PGGSSDELEGATION to the set of environment
variables cleared by pg_regress and Utils.pm.
Abhijit Menon-Sen, per gripe from Alvaro Herrera
Discussion: https://postgr.es/m/20230522091609.nlyuu4nolhycqs2p@alvherre.pgsql
|
|
|
|
Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 642d41265b1ea68ae71a66ade5c5440ba366a890
|
|
Apparently an oversight in 2820adf7755d.
|
|
Improve description of "Allow logical decoding on standbys".
|
|
This change renames --admin to --with-admin, --role to --member-of,
and --member to --with-member. Many people found the previous
names to be confusing. The --admin and --member options are new in
v16, but --role has been there for a while, so that one has been
kept (but left undocumented) for backward compatibility.
Suggested-by: Peter Eisentraut
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/ZFvVZvQDliIWmOwg%40momjian.us
|
|
Reported-by: Andres Freund, jian he
Discussion: https://postgr.es/m/20230521171341.jjxykfsefsek4kzj@awork3.anarazel.de, 20230521171341.jjxykfsefsek4kzj@awork3.anarazel.de
|
|
Reported-by: Tom Lane
Discussion: https://postgr.es/m/277016.1684689065@sss.pgh.pa.us
|
|
Use the clause's required_relids not clause_relids for testing
whether it is computable at the current join level, if it is a
clone clause generated by deconstruct_distribute_oj_quals().
Arguably, this is more correct and we should do it for all clauses;
that would at least remove the handwavy claim that we are doing
it to save cycles compared to inspecting Vars individually.
However, attempting to do that exposes that we are not being careful
to compute an accurate value for required_relids in all cases.
I'm unsure whether it's a good idea to attempt to do that for v16,
or leave it as future clean-up. In the meantime, this quick hack
demonstrably fixes some cases, so let's squeeze it in for beta1.
Patch by me, but great thanks to Richard Guo for investigation
and testing. The new test cases are all modeled on his examples.
Discussion: https://postgr.es/m/CAMbWs4-_vwkBij4XOQ5ukxUvLgwTm0kS5_DO9CicUeKbEfKjUw@mail.gmail.com
|
|
The assertion checked that the size of the relation is not "too large" - but
the code is explicitly dealing with the possibility of another backend
extending the relation concurrently. In that case the new relation size could
be bigger than what the current backend needs, wrongly triggering an assertion
failure.
Unfortunately it is hard to write a reliable and affordable regression tests
for this, as a lot of concurrency is needed to encounter the bug.
Introduced in 31966b151e6a.
Reported-by: Melanie Plageman <melanieplageman@gmail.com>
|
|
WalSndWakeup() currently loops through all the walsenders slots, with a
spinlock acquisition and release for every iteration, to wake up waiting
walsenders.
This commonly was not a problem before e101dfac3a53c. But, to allow logical
decoding on standbys, we need to wake up logical walsenders after every WAL
record is applied on the standby, rather just when flushing WAL or switching
timelines. This causes a performance regression for workloads replaying a lot
of WAL records.
To solve this, we use condition variable (CV) to efficiently wake up
walsenders in WalSndWakeup().
Every walsender prepares to sleep on a shared memory CV. Note that it just
prepares to sleep on the CV (i.e., adds itself to the CV's waitlist), but does
not actually wait on the CV (IOW, it never calls ConditionVariableSleep()). It
still uses WaitEventSetWait() for waiting, because CV infrastructure doesn't
handle FeBe socket events currently. The processes (startup process,
walreceiver etc.) wanting to wake up walsenders use
ConditionVariableBroadcast(), which in turn calls SetLatch(), helping
walsenders come out of WaitEventSetWait().
We use separate shared memory CVs for physical and logical walsenders for
selective wake ups, see WalSndWakeup() for more details.
This approach is simple and reasonably efficient. But not very elegant. But
for 16 it seems to be a better path than a larger redesign of the CV
mechanism. A desirable future improvement would be to add support for CVs
into WaitEventSetWait().
This still leaves us with a small regression in very extreme workloads (due to
the spinlock acquisition in ConditionVariableBroadcast() when there are no
waiters) - but that seems acceptable.
Reported-by: Andres Freund <andres@anarazel.de>
Suggested-by: Andres Freund <andres@anarazel.de>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Discussion: https://www.postgresql.org/message-id/20230509190247.3rrplhdgem6su6cg%40awork3.anarazel.de
|
|
Reported-by: Ian Lawrence Barwick
Discussion: https://postgr.es/m/CAB8KJ=hLvQDb53WdigV7OBEBh5tzQ7eA=pG0ZpccoRVBUNCXYA@mail.gmail.com
|
|
Tweak column widths in a couple of tables to avoid "contents
... exceed the available area" warnings. Remove usage of
some non-Latin-1 characters.
Discussion: https://postgr.es/m/614600.1684537037@sss.pgh.pa.us
|
|
Complete the task begun in 9c0a0e2ed: we don't want to use the
abbreviation "deleg" for GSS delegation in any user-visible places.
(For consistency, this also changes most internal uses too.)
Abhijit Menon-Sen and Tom Lane
Discussion: https://postgr.es/m/949048.1684639317@sss.pgh.pa.us
|
|
These were missed in 9c0a0e2ed9.
Discussion: https://postgr.es/m/20230521031757.GA3835667%40nathanxps13
|
|
This is more consistent with existing GUC spelling.
Discussion: https://postgr.es/m/ZGdnEsGtNj7+fZoa@momjian.us
|
|
* document to_reg* accepting OIDs
* document pg_log_standby_snapshot()
* document pg_input_is_valid() and pg_input_error_info()
* handle rename of function to pg_split_walfile_name()
* fix character encoding problem for Przemyslaw Sztoch
* remove partition section
Reported-by: jian he, Tom Lane, Bertrand Drouvot
|
|
|
|
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
|
|
Our standard version of perltidy is now 20230309.
Add a --valign-exclusion-list setting to reduce crosstalk
between nearby lines of Perl code.
Also, update instructions for running pgindent
(missed in b16259b3c).
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
|
|
Run renumber_oids.pl to move high-numbered OIDs down, as per pre-beta
tasks specified by RELEASE_CHANGES. For reference, the command was
./renumber_oids.pl --first-mapped-oid 8000 --target-oid 6200
|
|
In commit 9df8f903e I (tgl) switched join_is_removable() from
using the min relid sets of the join under consideration to
using its full syntactic relid sets. This was a mistake,
as it allowed join removal in cases where a reference to the
join output would survive in some syntactically-lower join
condition. Revert to the former coding.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-EU9uBGSP7G-iTwLBhRQ=rnZKvFDhD+n+xhajokyPCKg@mail.gmail.com
|
|
The idea of EvalPlanQual is that we replace the query's scan of the
result relation with a single injected tuple, and see if we get a
tuple out, thereby implying that the injected tuple still passes the
query quals. (In join cases, other relations in the query are still
scanned normally.) This logic was not updated when commit 86dc90056
made it possible for a single DML query plan to have multiple result
relations, when the query target relation has inheritance or partition
children. We replaced the output for the current result relation
successfully, but other result relations were still scanned normally;
thus, if any other result relation contained a tuple satisfying the
quals, we'd think the EPQ check passed, even if it did not pass for
the injected tuple itself. This would lead to update or delete
actions getting performed when they should have been skipped due to
a conflicting concurrent update in READ COMMITTED isolation mode.
Fix by blocking all sibling result relations from emitting tuples
during an EvalPlanQual recheck. In the back branches, the fix is
complicated a bit by the need to not change the size of struct
EPQState (else we'd have ABI-breaking changes in offsets in
struct ModifyTableState). Like the back-patches of 3f7836ff6
and 4b3e37993, add a separately palloc'd struct to avoid that.
The logic is the same as in HEAD otherwise.
This is only a live bug back to v14 where 86dc90056 came in.
However, I chose to back-patch the test cases further, on the
grounds that this whole area is none too well tested. I skipped
doing so in v11 though because none of the test applied cleanly,
and it didn't quite seem worth extra work for a branch with only
six months to live.
Per report from Ante Krešić (via Aleksander Alekseev)
Discussion: https://postgr.es/m/CAJ7c6TMBTN3rcz4=AjYhLPD_w3FFT0Wq_C15jxCDn8U4tZnH1g@mail.gmail.com
|
|
Don't throw away the previous value when an invalid value is proposed.
Discussion: https://postgr.es/m/20230519110205.updpbjiuqgbox6gp@alvherre.pgsql
|
|
|
|
Reported-by: Nathan Bossart, Sehrope Sarkuni
|
|
Should a hash join exceed memory limit, the hashtable is split up into
multiple batches. The number of batches is doubled each time a given
batch is determined not to fit in memory. Each batch file is allocated
with a block-sized buffer for buffering tuples and parallel hash join
has additional sharedtuplestore accessor buffers.
In some pathological cases requiring a lot of batches, often with skewed
data, bad stats, or very large datasets, users can run out-of-memory
solely from the memory overhead of all the batch files' buffers.
Batch files were allocated in the ExecutorState memory context, making
it very hard to identify when this batch explosion was the source of an
OOM. This commit allocates the batch files in a dedicated memory
context, making it easier to identify the cause of an OOM and work to
avoid it.
Based on initial draft by Tomas Vondra, with significant reworks and
improvements by Jehan-Guillaume de Rorthais.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Author: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/20190421114618.z3mpgmimc3rmubi4@development
Discussion: https://postgr.es/m/20230504193006.1b5b9622%40karst#273020ff4061fc7a2fbb1ba96b281f17
|
|
Add a high level description of our implementation of the hybrid hash
join algorithm to the block comment in nodeHashjoin.c.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://postgr.es/m/20230516160051.4267a800%40karst
|
|
Commits 681d9e462 et al added a test case in namespace.sql that
implicitly relied on there not being a table "public.abc".
However, the concurrently-run transactions.sql test creates precisely
such a table, so with the right timing you'd get a failure.
Creating a table named as generically as "abc" in a common schema
seems like bad practice, so fix this by changing the name of
transactions.sql's table. (Compare 2cf8c7aa4.)
Marina Polyakova
Discussion: https://postgr.es/m/80d0201636665d82185942e7112257b4@postgrespro.ru
|
|
|
|
Reported-by: Vibhor Kumar
|
|
Reported-by: Hans Buschmann
|
|
The previous order in the file didn't make sense and matched neither
the header file nor the smgr API.
Discussion: https://www.postgresql.org/message-id/flat/22fed8ba-01c3-2008-a256-4ea912d68fab%40enterprisedb.com
|
|
Most (older) comments in md.c and smgr.c are indented with a leading
tab on all lines, which isn't the current style and makes updating the
comments a bit annoying. This reindents all these lines with a single
space, as is the normal style. This issue exists in various shapes
throughout the code but it's pretty consistent here, and since there
is a patch pending to refresh some of the comments in these files, it
seems sensible to clean this up here separately.
Discussion: https://www.postgresql.org/message-id/flat/22fed8ba-01c3-2008-a256-4ea912d68fab%40enterprisedb.com
|
|
Non-leaf pages of GiST indexes contain key attributes, leaf pages
contain both key and non-key attributes, and gist_page_items() ignored
the handling of non-key attributes. This caused a few problems when
using gist_page_items() on a GiST index with INCLUDE:
- On a non-leaf page, the function would crash.
- On a leaf page, the function would work, but miss to display all the
values for included attributes.
This commit fixes gist_page_items() to handle such cases in a more
appropriate way, and now displays the values of key and non-key
attributes for each item separately in a style consistent with what
ruleutils.c would generate for the attribute list, depending on the page
type dealt with. In a way similar to how a record is displayed, values
would be double-quoted for key or non-key attributes if required.
ruleutils.c did not provide a routine able to control if non-key
attributes should be displayed, so an extended() routine for index
definitions is added to work around the leaf and non-leaf page
differences.
While on it, this commit fixes a third problem related to the amount of
data reported for key attributes. The code originally relied on
BuildIndexValueDescription() (used for error reports on constraints)
that would not print all the data stored in the index but the index
opclass's input type, so this limited the amount of information
available. This switch makes gist_page_items() much cheaper as there is
no need to run ACL checks for each item printed, which is not an issue
anyway as superuser rights are required to execute the functions of
pageinspect. Opclasses whose data cannot be displayed can rely on
gist_page_items_bytea().
The documentation of this function was slightly incorrect for the
output results generated on HEAD and v15, so adjust it on these
branches.
Author: Alexander Lakhin, Michael Paquier
Discussion: https://postgr.es/m/17884-cb8c326522977acb@postgresql.org
Backpatch-through: 14
|
|
Reported-by: Peter Geoghegan
|
|
Discussion: https://postgr.es/m/ZFvVZvQDliIWmOwg@momjian.us
|
|
Reported-by: Peter Geoghegan
|
|
Commit 3581cbdcd6 added a flag to identify empty BRIN ranges. This adds
the new flag to brin_page_items() output.
This is kept as a separate commit as it should not be backpatched.
Reviewed-by: Justin Pryzby, Matthias van de Meent, Alvaro Herrera
Discussion: https://postgr.es/m/402430e4-7d9d-6cf1-09ef-464d80afff3b@enterprisedb.com
|
|
BRIN indexes did not properly distinguish between summaries for empty
(no rows) and all-NULL ranges, treating them as essentially the same
thing. Summaries were initialized with allnulls=true, and opclasses
simply reset allnulls to false when processing the first non-NULL value.
This however produces incorrect results if the range starts with a NULL
value (or a sequence of NULL values), in which case we forget the range
contains NULL values when adding the first non-NULL value.
This happens because the allnulls flag is used for two separate
purposes - to mark empty ranges (not representing any rows yet) and
ranges containing only NULL values.
Opclasses don't know which of these cases it is, and so don't know
whether to set hasnulls=true. Setting the flag in both cases would make
it correct, but it would also make BRIN indexes useless for queries with
IS NULL clauses. All ranges start empty (and thus allnulls=true), so all
ranges would end up with either allnulls=true or hasnulls=true.
The severity of the issue is somewhat reduced by the fact that it only
happens when adding values to an existing summary with allnulls=true.
This can happen e.g. for small tables (because a summary for the first
range exists for all BRIN indexes), or for tables with large fraction of
NULL values in the indexed columns.
Bulk summarization (e.g. during CREATE INDEX or automatic summarization)
that processes all values at once is not affected by this issue. In this
case the flags were updated in a slightly different way, not forgetting
the NULL values.
To identify empty ranges we use a new flag, stored in an unused bit in
the BRIN tuple header so the on-disk format remains the same. A matching
flag is added to BrinMemTuple, into a 3B gap after bt_placeholder.
That means there's no risk of ABI breakage, although we don't actually
pass the BrinMemTuple to any public API.
We could also skip storing index tuples for empty summaries, but then
we'd have to always process such ranges - even if there are no rows in
large parts of the table (e.g. after a bulk DELETE), it would still
require reading the pages etc. So we store them, but ignore them when
building the bitmap.
Backpatch to 11. The issue exists since BRIN indexes were introduced in
9.5, but older releases are already EOL.
Backpatch-through: 11
Reviewed-by: Justin Pryzby, Matthias van de Meent, Alvaro Herrera
Discussion: https://postgr.es/m/402430e4-7d9d-6cf1-09ef-464d80afff3b@enterprisedb.com
|
|
Reported-by: Peter Geoghegan
|
